The density of a liquid substance is 0.95 g/mL. Three students calculated the density as 0.56 g/mL. Calculate the percent
error.

Answers

Answer 1

Answer:

The answer is 41.05 %

Explanation:

The percentage error of a certain measurement can be found by using the formula

[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]

From the question we have

actual number = 0.95 g/mL

error = 0.95 - 0.56 = 0.39

We have

[tex]p(\%) = \frac{0.39}{0.95} \times 100 \\ = 41.0526315...[/tex]

We have the final answer as

41.05 %

Hope this helps you


Related Questions

Calculate the volume 3.00 moles of a gas will occupy at 24.0 °C and 762.4 mm Hg.

Answers

Answer:

Use formula of PV = nRT

Change formula to solve for Volume = nRT/P

R is a constant 0.08206

Convert C to Kelvin which is just +273

And turn mmHg into atm which is around 1 atm

Plug in and solve

what do you mean by international understanding peace

and cooperation​

Answers

Answer:

International understanding or internationalism is a feeling that the individual is a not only a member of his country, but a member of the world as well.  To ensure world peace.  To prevent world wars.  To promote human welfare. To promote mutual understanding and interdependence.

4. Describe the arrangement of the electrons on each energy level.

Answers

Answer:

Explanation:

If the energy of an atom is increased, an electron in the atom gets excited. To go back to its ground state, the electron releases energy. The energy of the light released when an electron drops in energy level is the same as the difference in energy between the two levels.

Viewed simply, electrons are arranged in shells around an atom’s nucleus. Electrons closest to the nucleus will have the lowest energy. Electrons further away from the nucleus will have higher energy. An atom’s electron shell can accommodate 2n2 electrons (where n is the shell level).

In a more realistic model, electrons move in atomic orbitals, or subshells. There are four different orbital shapes: s, p, d, and f. Within each shell, the s subshell is at a lower energy than the p. An orbital diagram is used to determine an atom’s electron configuration.

There are guidelines for determining the electron configuration of an atom. An electron will move to the orbital with lowest energy. Each orbital can hold only one electron pair. Electrons will separate as much as possible within a shell.

In an atom, electrons are arranged in shells that surround the nucleus, with each successive shell moving further away from the nucleus.

What is energy level?

In physics, an energy level is any discrete value from a set of total energy values for a subatomic particle confined by a force to a limited space or for a system of such particles, such as an atom or a nucleus.

Energy levels are fixed distances from an atom's nucleus where electrons can be found. Electrons are tiny, negatively charged particles that move around an atom's positive nucleus. The steps of a staircase represent energy levels.

Around the nucleus, electrons are arranged in different shells. Each successive shell can only hold so many electrons. First, the innermost shell is filled. This shell can only contain two electrons.

Thus, this way, the electrons are arranged.

For more details regarding energy level, visit:

https://brainly.com/question/17396431

#SPJ6


An element, X, has 2 isotopes, X-32 with an abundance of 31.5% and X-35 with an abundance
of 68.5%. What is the average atomic mass of element X?

Answers

Answer:

amu = 34.055 or 34.1

Explanation:

to calculate the average mass, first convert the percentages into decimals. Then, calculate the mass numbers. To get this number, multiply the decimal by the mass number for each isotope and, then add them together.

( 0.315 x 32 ) + (0.685 x 35 ) = 34.055

Scientists and nutritionists have long suspected that high-fructose corn syrup, used to

sweeten soft drinks, is one of the causes of childhood obesity. In a recent study, at the

University of Cincinnati, researchers found that mice that drank water with added

fructose ate less solid food, gained more weight, and put on 90% more body fat than

mice that drank only water. Scientists concluded that fructose may affect metabolism in

a way that favors fat storage.

What is the independent variable?

The mice that drank only water

The presence of fructose in their diet

The quantity of water provided

The weight gained by the mice

Answers

Answer:

The presence of fructose in their diet

Explanation:

The independent variable in an experiment is the type of variable which is changed at intervals in order to study if it has a direct effect on the dependent variable.

The dependent variable in the experiment is the amount of weight gained by the mice in each group and the control group is the mice who drank the water without the fructose added.

Not all protists use flagella or cilia to move. Give an example of another way protists move and identify the type of protist that uses that mode of movement.​

Answers

Answer: One of the most striking features of many protist species is the presence of some type of locomotory organelle, easily visible under a light microscope. A few forms can move by gliding or floating, although the vast majority move by means of “whips” or small “hairs” known as flagella or cilia, respectively. (Those organelles give their names to informal groups—flagellates and ciliates—of protists.) A lesser number of protists employ pseudopodia. Those same organelles may be used in feeding as well.

Explanation:

Arrange the following metals in order of increasing reactivity Pb,Al, Sn,Q,Au,and Mg.​

Answers

Answer:

Sn, Q,Au, Al,Pb

Explanation:

Because thats hw that works

HOPE IT HElPS

What is the purpose of the title of a line graph

Answers

Answer:

It tells about the data for each line graph is plotted.

Explanation:

Answer:

It can describe what the line graph is measuring and how it is measuring it

Which event is part of a convection current in the air?
A. Cool air sinks.
B. Cool air rises.
C. Warm air swirls.
D. Warm air sinks

Answers

Answer:

The answer is (Cool air sinks)

Explanation:

hope I help

The Cool air sinks are the part of a convection current in the air. Therefore, option A is correct.

What is convection current ?

Convection currents are a type of natural heat transfer that involves the transfer of energy and heat from one location to another. We can use the sensation of heat when placing our hands over a campfire as an example of this. Convection currents are to blame for this.

Convection is a method of heat transfer in which gases or liquids are moved between areas of varying temperatures. Natural or free convection is the term used to describe convection that occurs naturally.

Convection currents move heat from one place to another by using the mass motion of a fluid, such as water, air, or molten rock. Convection currents' ability to transfer heat is what drives ocean currents, atmospheric weather, and geology.

Thus, option A is correct.

To learn more about convection current, follow the link;

https://brainly.com/question/9739063

#SPJ5

All of the following are examples of making physical changes EXCEPT:
A:painting walls
b:Making ice cubes
C:Making oxygen out of water
D:chopping wood

Answers

Your answer would be true
Have a good day :)

Based on the article "Will the real atomic model please stand up?," describe what Dalton's theory states about a molecule of water. Dalton's theory about compounds tells us that all water molecules have different kinds of atoms, two hydrogen atoms for every one oxygen atom.

Answers

Answer:

Follows are the solution to this question:

Explanation:

The characterization with water molecules would be that light waves are made up of 2 different types of atoms (2 hydrogen and 1 oxygen atoms), as per the Dalton theory. There are many multiple times as many atoms of hydrogen as oxygen atoms in each water molecules. For every two hydrogen atoms, all water molecules have one oxygen atom.

Answer:

Sample Response: Dalton’s theory about compounds tells us that all water molecules have different kinds of atoms, two hydrogen atoms for every one oxygen atom.

Explanation:

А. B
Which of the following is true about the picture above? What would it be?

Answers

Answer:

Container A is a solution and Container B is a colloid.

Explanation:

Container A is a solution as the tyndall efffect is not present. You cannot see the light bean through the glass.

Container B is a suspension or a colloid as you can see the beam through the glass.

The first option proposes Container A is a colloid...this is not correct

The third option is not true as the tyndall effect is only displayed in container B

The fourth option is not correct the tyndall effect is not present in container A meaning it would not be a suspension or a colloid and you can see the tyndall effect in container B indicating its not a solution

Choose each statement that is scientific.
a. The universe's average temperature and rate of expansion support the idea that it began as one super-dense and hot mass 13.8 billion years ago.
b.The opinions of randomly selected participants in a survey prove the idea that global temperatures are not increasing on Earth.
c.Ocean tides are caused by the uneven gravitational pulls of the Moon and Sun on different parts of Earth.
d.Human life is more valuable than other forms of life on Earth because humans are more intelligent than other organisms.

Answers

Answer:

he universe's average temperature and rate of expansion support the idea that it began as one super-dense and hot mass 13.8 billion years ago.

Ocean tides are caused by the uneven gravitational pulls of the Moon and Sun on different parts of Earth.

Explanation:

These statements are objective truths or rational speculations adequately supported by evidence.  The others are from unreliable sources, and are based on opinion.

the answer is A!

Answer:

A and C are correct, I took the test

Explanation:

In reality, energy conversion from burning fuel is never 100% efficient. Significant loss of energy due to heating occurs. If the generator were only 20% efficient (which is more realistic), how much energy in joules would be converted to electrical energy and how much would be lost to heat? (2 points)​

Answers

Answer:

Electrical energy = 130000000 J and Heat energy = 520000000 J

Explanation:

Multiply the amount of joules from the last question (650000000) by .20 and .80. (Which are the percentages)

Which of the following is true about metals?
A. They are usually less reflective in luster than metalloids.
B.
They are usually better conductors than nonmetals.
C. They are usually less malleable than nonmetals.
D.
They are usually more brittle than metalloids.

Answers

B. They are usually better conductors than nonmetals

A student states that photosynthesis is conducted only in plant cells and that cellular respiration occurs only in animal cells. Tell whether the student is correct and why. In your response, be sure to describe both processes and the structures involved. Upload your answer below.

Answers

Answer:

This is correct

Explanation:

This is correct because for photosynthesis you need organelles such as chloroplasts, chloroplasts absorb light energy and convert it into usable energy for plants. Animal cells do not have chloroplasts/similar organelles so  they can't absorb energy from the sun, Animal cells use mitochondria which takes energy from our food and breaks it down into usable energy(such as ATP) to be transported.

Rubbing alcohol or isopropanol can be described by the chemical formula C3H7OH. One milliliter of isopropanol has a mass of 0.76 g, so its density is 0.76 g/mL. Isopropanol is often used as a cleaner or a disinfectant and evaporates when placed on warm objects. However, caution must be taken when using isopropanol, because it is also highly flammable. Which of the following is a chemical property of isopropanol?
A. One mL of isopropanol has a mass of 0.76 g.
B. Isopropanol has a density of 0.76 g/mL.
C. Isopropanol evaporates when placed on a warm object.
D. Isopropanol is flammable.

Answers

A chemical property of isopropanol : D. Isopropanol is flammable.

Further explanation

There are changes that occur in the mater: physical changes and chemical changes

Classification uses the principle of the initial and final state of the substance.

Physical changes do not form new substances, so the properties of the particles remain the same.(size,volume,shape)

Example : boiling and freezing, just change its phase form from liquid to gas or from liquid to solid

 

Chemical changes/reaction form new substances(products) that are different from the initial substances(reactants)

Example : toxic, corroded

So :

the physical properties of isopropanol :

mass, density, evaporation

the chemical properties of isopropanol :

highly flammable

Answer:

D. Isopropanol is flammable.

Explanation:

Mass, volume, temperature, phase of matter, color, texture, density, and hardness are all examples of physical properties. However, flammability is an example of a chemical property.

Chemical properties describe an object's potential to change its chemical composition. These properties depend on the types of atoms found in the object and the arrangement of those atoms (and their subatomic particles).

Technetium-104 has a half-life of 18.0 minutes. How much of a 165.0 g sample remains after 126 minutes?

Answers

Answer:

1.28g

Explanation:

honestly just put it a half life caculator i couldnt tell you how to do it if my life depended on it ‍♂️

by . Figure the density of the liquid in each beaker: The mass and volume of each liquid have been given in Table 1. Using the formula for density and a calculator, figure the density of each liquid and record it in the density column of Table 1. Round and write your answer out to the nearest hundredth. (This means you will have two numbers after the decimal point.) Don't forget to write the units!!!!!! (Hint: The formula was the answer to #2 on the front page.)​

Answers

Answer:

Well what are the numbers but ik that it ius 5

Explanation:

What happens to the particles of a liquid when energy is removed from them?

A. The motion of the particles increases and the distance between the particles increases.

B. The motion of the particles increases and the distance between the particles decreases.

C. The motion of the particles decreases and the distance between the particles increases.

D. The motion of the particles decreases and the distance between the particles decreases.

Answers

Answer:

b im pretty sure it is  b

Explanation  b  The motion of the particles increases and the distance between the particles decreases.

The motion of the particles decreases and the distance between the particles increases, the correct option is C.

What are different states of matter?

The matter is anything that has mass and occupies space.

Matter can exist in four different states: solid, liquid, gas, and plasma.

By examining the arrangement of molecules, it is possible to comprehend the characteristics of the many forms of matter.

The state of a solid turns to a liquid when it is heated past its melting point.

A liquid turns into a gas when it is heated past the point at which it vaporizes.

Solids have a distinct shape and dimension and are densely packed.

Liquids fill the container's space and are loosely packed.

Gas has a large intermolecular distance and is not stiff.

When energy is removed from the particles of a liquid, the speed gets slowed, and so the motion decreases, as the motion is limited they become packed and the distance between them decreases, and the intermolecular forces increases.

To know more about Different states of matter

brainly.com/question/1134312

#SPJ6

Would love some help pleaseee. and please at least read the question instead of skipping it please.

Measuring tools can have errors. Errors lead to ___________________ results and _______________ conclusions. To calculate the difference of the accepted value and the experimental value, scientists use this formula:
percent error = (experimental value − ) × 100. accepted value
Minimizing Bias
People show bias when they want everyone to accept their results. Bias can arise for many reasons:
• Companies show bias when they depict only the research details that are in the best interest of their ____________.
• Scientists may be biased toward their _____________ and modify results suit their needs.
• Scientists may also show to bias get their research published in ______________ ______________.
Such biases often lead to _______________ facts. An important part of scientific thinking is identifying biases and taking the necessary steps to minimize them.
For results to be considered scientifically accurate, any scientist, regardless of his or her own bias, should be able to replicate the experiment and get the same results.
Summary
Think of some studies you’ve heard about. How can you tell whether the studies were well-designed and scientifically accurate or had biases?

Answers

Answer: this looks like your homework

Explanation:if you want help you are going to have to ask a specific question instead of giving people your homework.

Answer:

Honestly I would search this up maybe there might be a pdf with the answers. Sorry chemistry isn't my thing:(

Explanation:

Which element has the electron con guration 1s 2 2s 2 2p 3 ? A. boron B. nitrogen C.
uorine D. phosphorus

Answers

C...zzzzzzzzzzzz....... who

Answer:

I believe it’s nitrogen

Explanation:

Becasue nitrogen is the 7th element

You are conducting an experiment with two very reactive substances. One will react with oxygen (O) and other substances in the air, and the other will react to metal in a container. What type of environment can you seal them in so they only react with each other?

Answers

Answer:

seal them in a glass container in an atmosphere of argon (Ar) gas

Explanation:

7 Which activity occurs in a plant cell but NOT in an animal cell? *
A Energy is released after food molecules are broken down.
B Materials are transported from one part of the cell to another part of the cell.
C Waste molecules are stored in vacuoles.
D Food is produced using light energy.

Answers

Answer:

don't know sorry

Explanation:

(-_-)

A physical change is easier / more difficult to reverse than a chemical change.

Answers

Answer:

the answer is that a physical change is easier to reverse then a chemical change.

Explanation: In order for a physical change to take place it's easier to just undo what happened then if it was a chemical change because in order for very few chemical changes to reverse to it's original substance you would need another chemical change.

The ion X2- belongs to an element in Group

Answers

Answer:

ion X²- an element in group VI A.

What occurs to the particles in a fluid during convection ?

Answers

Answer: what are options

Explanation:

What do Lucille's cells need in order for her body to function properly? How might a problem with Lucille's respiratory system lead to low levels of oxygen in her cells? Why does having low levels of oxygen in her cells make it difficult for Lucille to play soccer?

Answers

Answer:

In order for her body to act correctly, Lucille's cells require glucose and oxygen. A problem with Lucille's respiratory system leading to low levels of oxygen in her cells is known as Hypoxemia. Having low levels of oxygen in her cells will make it difficult for Lucille to play soccer because she would not be able to breathe .If her respiratory system doesn't function properly, so enough oxygen molecules will not move into her respiratory system , ensuring that her cells won't have enough oxygen molecules. Playing soccer is difficult if you don't have enough air.

Explanation:

ABOUT HYPOXEMIA -: It is called hypoxemia to have low oxygen levels in your blood. It is called hypoxia to have insufficient oxygen levels in the tissues. Hypoxemia at high altitudes can occur. Hypoxemia that induces low levels of oxygen in the tissues of the body is called hypoxia. The two words are often used by people interchangeably, but they are not the same thing.

The capacity of the body to supply normal amounts of oxygen to the blood can interfere with a number of conditions and circumstances. Some of hypoxemia's most prevalent causes include:

Heart problems, heart defects included  .Lung disorders such as asthma , bronchitis, emphysema. High-altitude areas where oxygen is lower in the air.  Powerful drugs for pain or other conditions that delay respiration . Sleep apnea (breathing impairment during sleep)  .Lung tissue inflammation or scarring (as in pulmonary fibrosis).

Answer:

In order for her body to act correctly, Lucille's cells require glucose and oxygen.

A problem with Lucille's respiratory system leading to low levels of oxygen in her cells is known as Hypoxemia.

Having low levels of oxygen in her cells will make it difficult for Lucille to play soccer because she would not be able to breathe .If her respiratory system doesn't function properly, so enough oxygen molecules will not move into her respiratory system , ensuring that her cells won't have enough oxygen molecules. Playing soccer is difficult if you don't have enough air.

Explanation:

ABOUT HYPOXEMIA -: It is called hypoxemia to have low oxygen levels in your blood. It is called hypoxemia to have insufficient oxygen levels in the tissues. Hypoxemia at high altitudes can occur. Hypoxemia that induces low levels of oxygen in the tissues of the body is called hypoxia. The two words are often used by people interchangeably, but they are not the same thing.

The capacity of the body to supply normal amounts of oxygen to the blood can interfere with a number of conditions and circumstances. Some of hypoxemia's most prevalent causes include:

Heart problems, heart defects included  .

Lung disorders such as asthma , bronchitis, emphysema.

High-altitude areas where oxygen is lower in the air.  

Powerful drugs for pain or other conditions that delay respiration .

Sleep apnea (breathing impairment during sleep)  .

Lung tissue inflammation or scarring (as in pulmonary fibrosis).

Explain how you would dilute a 1 mol/dm solution to one-tenth of its original
concentration.​

Answers

Answer:

13.123.

Explanation:

Which statements about scientific explanations are true?
I. Scientific explanations must prove that a hypothesis is true.

II. Scientific explanations should be based on evidence or data.

III. Scientific explanations must have logical and consistent arguments.

IV. Scientific explanations should use scientific principles, models, and theories.

Answers

Answer:

The statement that is true is:

II. Scientific explanations should be based on evidence or data.

                                                                                     ~Lylliara Jackson~

Other Questions
I need help in chemistry!!!!!!!!!!! For your birthday, you had a party at The Main Event. Your parents paid for you and 9 friends to play one game of bowling and one game of laser tag. It costs $8 for each combo ticket (covers both bowling and laser tag). Your parents also paid for a meal ticket ($6) for all of you to have pizza and a drink, but only you and 6 of your friends wanted a meal ticket. 6. Write an expression and solve it to find how much money your parents spent for the games and food/drink at The Main Event. Show all work Need emotional talk my email is shaneb9988 at g m a i l .com just email me for advice been through alot of it. Plz need people to give advice to to also help me out a little becaues im helping others out Tristan bought 23 chicken wings for $57.50. What's the unit cost of one wing? Factors responsible for the high population density in japan 3Select the correct answer.What is consciousness?O A.a state of being aware of the environment and oneselfOB.a dreaming stateO C.a meditation methodOD.a progressive relaxation methodResetNext 3. The last dividend paid by New Technologies was an annual dividend of $1.40 a share. Dividends for the next 3 years will be increased at an annual rate of 8 percent. After that, dividends are expected to increase by 3 percent each year. The discount rate is 16 percent. What is the current value of this stock is this statement true if not tell me what really happened Monks and nuns, serving as missionaries, helped spread Christianity throughout Europe The triangular trade is from Europe to Africa to the Americas, using the slave code, and selling the slaves because of their diversity.Pls answer this before 11:29 Mai says that -8 > -4 . Do you agree with her? Explain or show your reasoning. brackets.a) They have already completed the work.(change intoNegative)b) I........ it two weeks ago.(use the correct from of theverb 'do')c) Let him do what he likes............?( add a Tag Question)d) Our teacher said," water freezes at 0 Celsius."(change into indirect speech) 3 7/10 x 7 what is the answer in fraction form or decimal form. Perhaps both Is this right? I need help pls, I'm failing the element iridium is more resistant to corrosion than any other metal. it also has a slightly smaller density than osmium: 22.42 centimeters squared. suppose you have a sample of iridium with a volume of 34.17 cm squared. what is the mass of this sample The density of an object is 7.3 g/mL and the volume is 0.94mL. What is the mass of the object? 6.which of the following is NOT a main part of the cell?A cell membraneB. cytoplasmC. nucleusD. ribosome Tyson and his friends go to ice skating. Tyson must pay an initial fee of $18.30 plus $4.80 per hour. Which equation can be used to find h, the number ofhours he can skate, if he pays a total of $37.50?37.50 -4.80 + 18.30h37.50 - 18.30 + 4.80 +h37.50 - (18.30 + 4.80)37.50 - 18.30 + 4.80h how many microprocessers will a small computer have guess these famous actors part one Provide reasons for the proof.Given: 24 and 2 and 3 are supplementaryProve: 1 3