the current is from left to right in the conductor showmn. the magnetic field is onto the page and point is at higher potential than point t. the charge carriers are
a. positive b. negative c. neutral d. absent e. moving near the speed of light

The slope of a graph of force versus acceleration should correspond to the mass of the object being measured, according to Newton's Second Law. This is because the formula for the law states that force is equal to mass times acceleration (F = ma). Therefore, the slope of the graph should be equal to the mass of the object.

To compare this to another quantity that can be measured, one could also measure the velocity of the object and calculate its momentum (p = mv). Momentum is a conserved quantity and can be used to predict the behavior of objects in collisions.

If the data collected follows a linear relationship between force and acceleration, and the slope corresponds to the mass of the object being measured, then the data supports Newton's Second Law. However, if the data does not follow a linear relationship or the slope does not correspond to the mass of the object, then there may be some other factors affecting the system that need to be considered.

Learn more about slopes at  brainly.com/question/3605446

#SPJ11

The friction force on the truck is approximately 36,614 N when a 4200 kg truck is parked on a 13 degree slope.

To calculate the friction force on a 4200 kg truck parked on a 13-degree slope with a coefficient of static friction of 0.90, we first need to find the force of gravity acting on the truck parallel to the slope ([tex]F_{parallel[/tex]) and the normal force ([tex]F_{normal[/tex]) acting perpendicular to the slope.
1. Calculate F_parallel:
[tex]F_{parallel[/tex] = m * g * sin(θ)
where m is the mass (4200 kg), g is the acceleration due to gravity (9.81 m/s²), and θ is the angle of the slope (13 degrees).
[tex]F_{parallel[/tex] = 4200 kg * 9.81 m/s² * sin(13°) ≈ 9383 N
2. Calculate [tex]F_{normal[/tex]:
[tex]F_{normal[/tex] = m * g * cos(θ)
[tex]F_{normal[/tex] = 4200 kg * 9.81 m/s² * cos(13°) ≈ 40,682 N
3. Calculate the friction force ([tex]F_{friction[/tex]):
[tex]F_{friction[/tex] = μ * [tex]F_{normal[/tex]
where μ is the coefficient of static friction (0.90).
[tex]F_{friction[/tex] = 0.90 * 40,682 N ≈ 36,614 N
The friction force on the truck is approximately 36,614 N.

Learn more about friction force :

https://brainly.com/question/30280752

#SPJ11

To find k elements that are most evenly spaced in an n-element array is sorting the array, calculating spacings, and using a priority queue to maintain the k.

First, sort the array in ascending order then calculate the difference between adjacent elements to find the spacing. Then, maintain a priority queue (min-heap) to store the k most evenly spaced pairs, where each pair has a value (difference between elements) and indices of the two elements. Initially, populate the priority queue with the first k pairs in the sorted array. For each subsequent pair, compare its spacing with the smallest spacing in the priority queue, if the current pair's spacing is larger, replace the smallest spacing in the priority queue with the current pair. Continue this process for all pairs in the array.

After iterating through the entire array, the priority queue will contain the k most evenly spaced pairs. Extract the elements corresponding to these pairs to obtain the final k elements. In summary, sorting the array, calculating spacings, and using a priority queue to maintain the k most evenly spaced pairs will help you find the k elements that are most evenly spaced in an n-element array.

Learn more about priority queue at:

https://brainly.com/question/31263410

#SPJ11

So, the linear velocity of a point on the edge of the disk is 24.12 m/s.

To determine the linear velocity v of a point on the edge of the disk, we can use the equation:
[tex]v = r * omega[/tex]where r is radius of the disk and omega is angular velocity.

Substituting:

v = 3.6 m x 6.7 rad/s
v = 24.12 m/s

Therefore, the linear velocity of a point on the edge of the disk is 24.12 m/s.
Hi! I'd be happy to help you with this question. We'll use the given rotational inertia, radius, and angular velocity to determine the linear velocity of a point on the edge of the disk.

Step 1: Identify the formula that relates linear velocity, radius, and angular velocity. The formula is:
[tex]v = r * ω[/tex]

where v: linear velocity, r: radius, and ω: angular velocity.

Step 2: Substitute values
v = (3.6 m) * (6.7 rad/s)

Step 3: Calculate the linear velocity.

v = 24.12 m/s

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ11

The correct answer is 66.8kN/C. To find the magnitude of the electric field at the center of the circle, we need to use the formula for electric field due to a charged rod.

However, in this case, the rod is bent into a semicircle, so we need to integrate the electric field due to each small segment of the rod.

The linear charge density is given by 1 = kx^4, so we can express the charge density of each small segment as dq = kx^4 dx. Using the formula for electric field due to a charged rod and integrating over the entire semicircle, we can find the electric field at the center.

To know more about magnitude refer here:

https://brainly.com/question/14452091#

#SPJ11

F = (15x^4y - 3, 3x^5) To find the force that acts at the point (x, y) for the given potential energy function U = 3x^5y - 3x, we need to take the negative gradient of U with respect to x and y.

To find the force that acts at a given point (x, y), we need to take the negative gradient of the potential energy function U. In other words:

F = -grad(U)

where grad is the gradient operator. In two dimensions, this is given by:

grad(U) = (dU/dx, dU/dy)

So we need to find the partial derivatives of U with respect to x and y:

dU/dx = 15x^4y - 3
dU/dy = 3x^5

Putting these together, we get:

grad(U) = (15x^4y - 3, 3x^5)

Therefore, the force that acts at the point (x,y) is:

F = -(15x^4y - 3, 3x^5) = (-15x^4y + 3, -3x^5)

Note that this force is a vector, with components in the x and y directions. It tells us the direction and magnitude of the force acting on an object at the point (x, y) due to the potential energy function U.

The gradient is a two-dimensional vector given by:

∇U = (∂U/∂x, ∂U/∂y)

To find the force, F, we take the negative gradient:

F = -∇U

Now, let's find the partial derivatives of U:

∂U/∂x = 15x^4y - 3
∂U/∂y = 3x^5

Now, plug these values into the force equation:

F = -(-∇U) = (15x^4y - 3, 3x^5)

So, the force acting at the point (x, y) is:

F = (15x^4y - 3, 3x^5)

learn more about potential energy function here: brainly.com/question/7201898

#SPJ11

The maximum power that can be generated from an 18 V emf using any combination of a 6.0 Ω resistor and a 9.0 Ω resistor is 90 W when the resistors are connected in parallel.

To find the maximum power generated from an 18 V emf using any combination of a 6.0 Ω resistor and a 9.0 Ω resistor, you'll want to use the power formula and determine the optimal resistor configuration.

Step 1: Determine the possible resistor configurations.

In this case, you can either connect the resistors in series or parallel.

Step 2: Calculate the equivalent resistance for each configuration.
- In series: Req = R1 + R2 = 6.0 Ω + 9.0 Ω = 15.0 Ω
- In parallel: 1/Req = 1/R1 + 1/R2

=> Req = 1 / (1/6.0 + 1/9.0) ≈ 3.6 Ω

Step 3: Use the power formula P = V² / R to find the power generated for each configuration.
- In series: P_series = (18 V)² / 15.0 Ω ≈ 21.6 W
- In parallel: P_parallel = (18 V)² / 3.6 Ω ≈ 90 W

Learn more about power:

https://brainly.com/question/11569624

#SPJ11

E*(s) = [1/0.4] / (s+1) - [1/2.4] / (s+3) + [5/2.4] / (s+0.2) - [5s/(s+1)(s+3)]

To find E*(s), we first need to find the Laplace transform of E(s):

E*(s) = L{E(s)} = L{1 - e^(-TS)} * 5s/(s+1)(s+3)

Using the formula for the Laplace transform of an exponential function, we have:

L{e^(-TS)} = 1/(s+T)

So:

E*(s) = (1/(s+T) - 1) * 5s/(s+1)(s+3)

Simplifying this expression, we have:

E*(s) = [5s/(s+1)(s+3)(s+T)] - [5s/(s+1)(s+3)]

Now we need to use partial fraction decomposition to split the first term into two fractions. We can write:

5s/(s+1)(s+3)(s+T) = A/(s+1) + B/(s+3) + C/(s+T)

Multiplying both sides by (s+1)(s+3)(s+T) and simplifying, we get:

5s = A(s+3)(s+T) + B(s+1)(s+T) + C(s+1)(s+3)

Plugging in s=-1, s=-3, and s=-T, we get a system of equations:

-15A = -4B - 2C
5A = -2B - 2C
5A = -4B - 3C

Solving this system, we get:

A = 1/(2T-4)
B = -1/(2T+2)
C = 5/(2T+2)

Substituting these values back into E*(s), we get:

E*(s) = [1/(2T-4)] / (s+1) - [1/(2T+2)] / (s+3) + [5/(2T+2)] / (s+T) - [5s/(s+1)(s+3)]

Finally, plugging in T=0.2s, we get:

E*(s) = [1/0.4] / (s+1) - [1/2.4] / (s+3) + [5/2.4] / (s+0.2) - [5s/(s+1)(s+3)]

To learn more about exponential function, refer below:

https://brainly.com/question/15352175

#SPJ11

The service entrance current increases by 12.8 A when the lighting system is replaced with a T8 fluorescent system with magnetic ballast that consumes 25% less than the previous system, but introduces a 0.91 leading power factor.

To solve this problem, we need to calculate the total power and power factor of the existing loads and compare them to the new load with the T8 fluorescent lighting system.

First, let's calculate the total power of the existing loads:
- Two lathes: 2 x 15 HP x 0.89 = 26.7 kW
- One heat pump: 7 ton x 12,000 BTU/ton / (3412 BTU/kW x 1.9) = 14.3 kW
- Two autoclaves: 2 x 30 BTU/h x 0.98 / 3412 BTU/kW = 0.17 kW
- One HID lighting system: 25 kW

Total power = 26.7 kW + 14.3 kW + 0.17 kW + 25 kW = 66.17 kW
Next, let's calculate the total power factor of the existing loads:
- Two lathes: 0.79 lagging power factor
- One heat pump: 0.95 lagging power factor
- Two autoclaves: 0.97 lagging power factor
- One HID lighting system: unity power factor

To calculate the total power factor, we need to convert the lagging power factors to their corresponding angles using the arccosine function:
- Two lathes: cos(arccos(0.79)) = 0.618 leading
- One heat pump: cos(arccos(0.95)) = 0.317 leading
- Two autoclaves: cos(arccos(0.97)) = 0.266 leading
- One HID lighting system: cos(arccos(1)) = 1

Total power factor = (0.618 + 0.317 + 0.266 + 1) / 4 = 0.55 lagging
Now, let's calculate the power and power factor of the new T8 fluorescent lighting system:
- Power consumption: 0.75 x 25 kW = 18.75 kW (25% less than 25 kW)
- Power factor: 0.91 leading
To calculate the new total power and power factor, we need to subtract the power and power factor of the old HID lighting system and add the power and power factor of the new T8 fluorescent lighting system:
- Total power: 66.17 kW - 25 kW + 18.75 kW = 60.92 kW
- Total power factor: (0.55 x 4 - 1 + 0.91) / 4 = 0.427 leading

Finally, we can calculate the new service entrance current using the formula:
I = P / (sqrt(3) x V x PF)
where I is the current in amps, P is the power in kilowatts, V is the voltage in volts, and PF is the power factor.
For the existing loads, the current is:
I1 = 66.17 kW / (3) x 480 V x 0.55) = 101.5 A

For the new loads with the T8 fluorescent lighting system, the current is:
I2 = 60.92 kW / (3) x 480 V x 0.427) = 114.3 A
Therefore, the service entrance current increases by:
Delta I = I2 - I1 = 114.3 A - 101.5 A = 12.8 A .

Learn more about power factor here:

https://brainly.com/question/31230529

#SPJ11

Answer:

I'm sorry I don't know an exact answer but try to use this, good luck!

Explanation:

Ideal gas law: P2*V2 = n*R*T

The molar mass of a 250 mL gas sample with a mass of 0.436 g, at a pressure of 736 mmHg, and a temperature of 26°C is 43.2 g/mol.

To determine the molar mass of a 250 mL gas sample with a mass of 0.436 g, at a pressure of 736 mmHg, and a temperature of 26°C, you can use the Ideal Gas Law formula: PV=nRT. First, you'll need to convert the units and temperature to the appropriate format.

First, convert volume from mL to L:

250 mL = 0.250 L

Convert pressure from mmHg to atm:

736 mmHg × (1 atm / 760 mmHg)

≈ 0.968 atm

Convert temperature from °C to K:

26°C + 273.15

= 299.15 K

Now, we can use the Ideal Gas Law to calculate the number of moles (n):

PV = nRT

n = PV / RT

n = (0.968 atm)(0.250 L) / (0.0821 L atm/mol K)(299.15 K)

n ≈ 0.0101 mol

Finally, to find the molar mass (M) of the gas:

M = mass of gas / number of moles

M = 0.436 g / 0.0101 mol

M ≈ 43.2 g/mol

Thus, the molar mass of the gas is approximately 43.2 g/mol.

Learn more about molar gas: https://brainly.com/question/30720372

#SPJ11

The dot product of the two vectors is zero, the set of vectors {(-1, 4), (8, 2)} in Rⁿ is orthogonal.

To determine if the given set of vectors in Rⁿ is orthogonal, we'll examine the dot product between the two vectors. If the dot product is zero, the vectors are orthogonal.
The given vectors are:
Vector A = (-1, 4)
Vector B = (8, 2)
To calculate the dot product, we multiply the corresponding components of each vector and then sum the products:
Dot product = (-1 * 8) + (4 * 2)
Dot product = (-8) + (8)
Dot product = 0
Since the dot product of the two vectors is zero, the set of vectors {(-1, 4), (8, 2)} in Rⁿ is orthogonal.

To learn more about vectors https://brainly.com/question/25705666

#SPJ11

The circuit's initial current is zero whenever the switch is open. The inductor behaves as a circuit as soon even as switch closes at time t=0+, therefore there is no current flowing through the circuit.

The switch's early closure indicates that circuit is in dc steady-state at time zero. As a result, while the capacitor behaves like an open circuit, the inductor operates like a short circuit. During t = 0-, b. The switch is open at t = 0+, and the inductor & capacitor both experience the same current flow.

The ratio of the inductor voltage to the change in current is 1. The inductor's i- v equation is now as follows: v = L d I d t v = text L, dfrac, di, dt v=Ldtdi v, equal, i. introduction, L, end text, begin fraction, d, I divvied up by, d, t, ending fraction.

To know more about current visit:

https://brainly.com/question/10439697

#SPJ1

The volume of lead removed per asperity per sliding distance is 5.47 × 10^-9 m^3.

To calculate the volume of lead removed per asperity per sliding distance, we need to use the Archard's wear law formula:

V = kF/d

Where V is the volume of wear, k is the wear coefficient, F is the load applied, and d is the sliding distance.

First, we need to calculate the wear coefficient, k. The wear coefficient depends on the material properties of the two surfaces in contact and the angle of the asperities. In this case, we have a hardened steel surface with conical asperities with an average semi-angle of 60° sliding on a soft lead surface with a hardness of 75 MPa.

The wear coefficient can be calculated using the following formula:

k = (H/E') * (1 - sinα) / (1 - ν^2)

Where H is the hardness of the lead surface, E' is the equivalent Young's modulus of the lead surface, α is the semi-angle of the asperities, and ν is the Poisson's ratio of the lead surface.

Assuming that the Poisson's ratio of the lead surface is 0.3, we can calculate the equivalent Young's modulus of the lead surface using the following formula:

E' = E / (2 * (1 + ν))

Where E is the Young's modulus of the lead surface.

Assuming that the Young's modulus of the lead surface is 15 GPa, we can calculate the equivalent Young's modulus of the lead surface:

E' = 15 GPa / (2 * (1 + 0.3)) = 6.25 GPa

Now, we can calculate the wear coefficient:

k = (H/E') * (1 - sinα) / (1 - ν^2) = (75 MPa / 6.25 GPa) * (1 - sin(60°)) / (1 - 0.3^2) = 1.365 × 10^-6

Next, we can calculate the volume of lead removed per asperity per sliding distance using the Archard's wear law formula:

V = kF/d = 1.365 × 10^-6 * 10 N / (π/6 * tan(60°))^2 = 5.47 × 10^-9 m^3

Therefore, the volume of lead removed per asperity per sliding distance is 5.47 × 10^-9 m^3.

Learn more about asperity here:

https://brainly.com/question/1747410

#SPJ11

Answer: Current SETI investigations are unlikely to catch television signals from a nearby civilisation because they are too faint to detect at stellar distances.

Explanation: Television signals are weaker than radio signals because they are sent in a narrow beam aimed at Earth's surface. These signals diminish quickly in space, making them hard to detect at enormous distances between stars. Radio emissions, which may be detected at interstellar distances, are the main SETI emphasis.

To know more about SETI investigation:

https://brainly.com/question/30027119

The speed of light as it moves through the substance is approximately 1.22 x 10^8 m/s.

The speed of light in a vacuum is approximately 3 x 108 m/s. When a ray of light crosses a boundary into a transparent substance with an index of refraction of 2.45, the speed of light is reduced by a factor of 1.45 (since the index of refraction is the ratio of the speed of light in a vacuum to the speed of light in the substance).

When a ray of light moves from air into a transparent medium with a different index of refraction, its speed changes according to the formula:

speed of light in the medium = speed of light in vacuum / index of refraction

The speed of light in a vacuum is approximately 3 x 10^8 m/s, and the given index of refraction for the transparent material is 2.45. Plugging these values into the formula, we get:

speed of light in the medium = (3 x 10^8 m/s) / 2.45 ≈ 1.22 x 10^8 m/s

So, the speed of the light as it moves through the transparent medium is approximately 1.22 x 10^8 m/s.

To learn more about speed of light click here

brainly.com/question/1555553

#SPJ11

The velocity of the space capsule after the push in the reference frame is -0.282 m/s.

To find the velocity of the space capsule, we'll use the conservation of momentum principle. The momentum before the push equals the momentum after the push. Initially, the astronaut and capsule are at rest, so their total momentum is 0. After the push, we have:

(m_astronaut * v_astronaut) + (m_capsule * v_capsule) = 0

Where m_astronaut = 160 kg, v_astronaut = 2.65 m/s, m_capsule = 1500 kg, and v_capsule is the velocity of the capsule after the push. Solving for v_capsule:

(160 kg * 2.65 m/s) + (1500 kg * v_capsule) = 0
v_capsule = -(160 kg * 2.65 m/s) / 1500 kg
v_capsule = -0.282 m/s

The negative sign indicates that the capsule moves in the opposite direction of the astronaut's push.

To know more about conservation of momentum click on below link:

https://brainly.com/question/24989124#

#SPJ11

The period of the comet with an average orbital radius of 4 AU is approximately [tex]8 AU^{3/2}[/tex].

The period of a comet is the time it takes for the comet to complete one orbit around the Sun. To calculate the period of a comet, we can use Kepler's Third Law, which states that the square of a planet's orbital period is proportional to the cube of its average orbital radius.
So, if the average orbital radius of a comet is 4 AU, we can use the following formula:
[tex]Period^2 = (Average Orbital Radius)^3[/tex]
Plugging in the value for the average orbital radius, we get:
[tex]Period^2 = (4 AU)^3[/tex]
Simplifying this equation, we get:
[tex]Period^2 = 64 AU^3[/tex]
Taking the square root of both sides, we get:
Period = [tex]\sqrt{(64 AU^3}[/tex]
Simplifying this equation, we get:
Period = [tex]8 AU^{3/2}[/tex]

To learn more about period click here https://brainly.com/question/30763550

#SPJ11

The time taken by a DVD to spin up, from rest to 675 rpm with an angular acceleration of 32.0 rad/s² is 2.21 seconds, The correct answer is option a.2.21 s.

We can use the formula for angular acceleration to find the time it takes for the DVD to spin up from rest to 675 rpm:
                  ωf = ωi + αt

Where:

          ωf = final angular velocity (675 rpm or 70.5 rad/s)
          ωi = initial angular velocity (0)
          α = angular acceleration (32.0 rad/s2)
          t = time

We need to find t. First, we need to convert ωf to rad/s:

         ωf = 675 rpm x 2π/60 = 70.5 rad/s

Now we can solve for t:

        70.5 rad/s = 0 + 32.0 rad/s2 x t
        t = 70.5 rad/s ÷ 32.0 rad/s2
        t = 2.20 s

Therefore, the answer is a. 221 s.

Learn more about angular acceleration here:

https://brainly.com/question/13014974

#SPJ11

The smallest power in watts that the ear can detect is called the threshold of hearing, and it varies with frequency.

The smallest power in watts that the ear can detect at a frequency of 1000 Hz is approximately 1 x 10^-12 watts per square meter of sound wave intensity.

Frequency is the number of cycles or oscillations per unit time of a wave, such as a sound wave or electromagnetic wave. It is commonly denoted by the symbol "f" and measured in hertz (Hz), which represents one cycle per second. The frequency of a wave is related to its wavelength and speed. As the wavelength decreases, the frequency increases, and vice versa.

The speed of a wave depends on the medium through which it travels, such as air, water, or a vacuum. Frequency plays a crucial role in many areas of physics, including the study of waves and vibrations, electricity and magnetism, and quantum mechanics. It is also important in fields such as music and communications, where the frequency of sound and electromagnetic waves respectively are used to convey information over long distances

To learn more about Frequency visit here:

brainly.com/question/14316711

#SPJ4

The Nusselt number equation: Nu = C R[tex]e^m[/tex] P[tex]r^n[/tex].

Nu1 = hL/k = [tex]C (V1 L/v)^m[/tex]P[tex]r^n[/tex]

Using the same equation for V=15 m/s, we get:

h2 = Nu2 k/L = [tex]C (V2 L/v)^m[/tex] P[tex]r^n[/tex]

Substituting the values we found for C and n, we can solve for m:

m = [log(h1/h2)]/[log(V1/V2)] = [log(50/40)]/[log(20/15)] = 0.5

The convection heat transfer coefficient for V=15 m/s:

h3 = [tex]C (V3 L/v)^m[/tex] P[tex]r^n[/tex] = [tex]C (V3 L/v)^m[/tex] [tex]C (V1 L/v)^m[/tex] P[tex]r^n[/tex] = (50 W/m².K) [tex](15/20)^{0.5}[/tex](0.5/1.5x[tex]10^{-5}[/tex])0.5[tex](0.7)^{0.24}[/tex]

h3 = 43.7 W/m².K

(b) To determine the convection heat transfer coefficient for a similar bar with L=1m when V=30 m/s, we can use the same equation and the values we found for C, m, and n:

h4 = [tex]C (V4 L/v)^m[/tex]P[tex]r^n[/tex] = (50 W/m².K) ([tex]30/20)^0.5[/tex] (0.5/1.5x[tex]10^{-5}[/tex])0.5 [tex](0.7)^{0.24}[/tex]

h4 = 87.5 W/m².K

(c) The results for the convection heat transfer coefficient would also be different.

The Nusselt number is a dimensionless parameter that relates the heat transfer coefficient, the thermal conductivity of the fluid, and the characteristic length scale of the system. It is commonly used in the field of heat transfer to quantify the efficiency of heat transfer between a fluid and a solid surface.

The Nusselt number is defined as the ratio of convective to conductive heat transfer across a boundary layer. It characterizes the rate of heat transfer from a solid surface to a fluid through the formation of a boundary layer. A higher Nusselt number indicates better heat transfer performance. The Nusselt number can be calculated using various equations depending on the type of flow and boundary conditions. It is an important parameter in the design of heat exchangers, cooling systems, and other applications where heat transfer is critical.

To learn more about Nusselt number visit here:

brainly.com/question/31139431

#SPJ4

The net force on q1 is 12.57 N to the right and the force between q1 and q3 is 1.81 N towards q3.

To calculate the net force on particle q1, we need to calculate the force between q1 and q2, as well as the force between q1 and q3. The formula for the force between two charges is given by Coulomb's Law:

F = k × (q1 × q2) / r²

Where F = force, q1 and q2 = charges, r = distance between the charges, and k = Coulomb's constant.

Calculate the force between q1 and q2:

F12 = k × (q1 × q2) / r²

F12 = (9 × 10⁹ N×m²/C²) × [(13 × 10⁻⁶ C) × (-5.9 × 10⁻⁶ C)] / (0.30 m)²

F12 = -1.83 N (attractive force)

The negative sign indicates that the force is attractive, pulling q1 and q2 towards each other.

Calculate the force between q1 and q3:

F13 = k × (q1 × q3) / r²

F13 = (9 × 10⁹ N×m²/C²) × [(13 × 10⁻⁶ C) × (7.7 × 10⁻⁶ C)] / (0.25 m)²

F13 = 14.4 N (repulsive force)

The positive sign indicates that the force is repulsive, pushing q1 and q3 away from each other.

Now calculate the net force on q1:

Fnet = F12 + F13

Fnet = -1.83 N + 14.4 N

Fnet = 12.57 N (to the right)

Therefore, the net force on q1 is 12.57 N to the right.

To calculate the force between q1 and q3, same formula as before:

F23 = k × (q2 × q3) / r²

F23 = (9 × 10⁹ N×m²/C²) × [(7.7 * 10⁻⁶ C) × (-5.9 × 10⁻⁶ C)] / (0.05 m)²

F23 = -1.81 N (attractive force)

The negative sign indicates that the force is attractive, pulling q2 and q3 towards each other.

Therefore, the force between q1 and q3 is 1.81 N towards q3.

Find out more on Coulomb's Law here: https://brainly.com/question/24743340

#SPJ1

The answer is 5.82 A counter-clockwise. The magnetic field m (B) at point P along the z-axis is given as 2.50 μT, and the distance z from the center of the current-carrying ring is 56.3 cm. The ring has a radius (R) of 78.0 cm. To find the current (I) in the ring, we can use Ampère's Law with the Biot-Savart Law.

The formula for the magnetic field B along the z-axis for a current-carrying ring is:
B = (μ₀ * I * R²) / (2 * (z² + R²)(3/2))

where μ₀ is the permeability of free space (4π × 10(-7) T m/A). We can rearrange the formula to solve for I:
I = (2 * B * (z² + R²) (3/2)) / (μ₀ * R²)

Now, plug in the given values:
I = (2 * 2.50 * 10(-6) T * (56.3 * 10(-2) m)² + (78.0 * 10(-2) m)²)(3/2)) / (4π × 10(-7) T m/A * (78.0 * 10(-2) m)²)

After solving the equation, we find that the current I ≈ 5.82 A. Since the magnetic field at point P is toward the origin (the -z direction), the current flows counter-clockwise when looking at the picture. Therefore, the answer is 5.82 A counter-clockwise.

For more such questions on Magnetic Field, visit:

brainly.com/question/14848188

#SPJ11

The answer is 5.82 A counter-clockwise. The magnetic field m (B) at point P along the z-axis is given as 2.50 μT, and the distance z from the center of the current-carrying ring is 56.3 cm. The ring has a radius (R) of 78.0 cm. To find the current (I) in the ring, we can use Ampère's Law with the Biot-Savart Law.

The formula for the magnetic field B along the z-axis for a current-carrying ring is:
B = (μ₀ * I * R²) / (2 * (z² + R²)(3/2))

where μ₀ is the permeability of free space (4π × 10(-7) T m/A). We can rearrange the formula to solve for I:
I = (2 * B * (z² + R²) (3/2)) / (μ₀ * R²)

Now, plug in the given values:
I = (2 * 2.50 * 10(-6) T * (56.3 * 10(-2) m)² + (78.0 * 10(-2) m)²)(3/2)) / (4π × 10(-7) T m/A * (78.0 * 10(-2) m)²)

After solving the equation, we find that the current I ≈ 5.82 A. Since the magnetic field at point P is toward the origin (the -z direction), the current flows counter-clockwise when looking at the picture. Therefore, the answer is 5.82 A counter-clockwise.

For more such questions on Magnetic Field, visit:

brainly.com/question/14848188

#SPJ11

The direction of the electric field at point P on the perpendicular bisector of AB is none (E=0) (Option E).

Since both charges are positive and equal in magnitude, their electric fields will cancel each other out at point P on the perpendicular bisector, resulting in a net electric field of 0. Therefore, the direction of the electric field at point P is neither →, ←, ↑ nor ↓. The correct answer is none (E=0) if the two charges are equal and opposite in sign, or there are no charges present.

Learn more about perpendicular bisector: https://brainly.com/question/12896755

#SPJ11

Answer :

Step-by-step explanation:

A crate is acted upon by a net force of 100 N. An acceleration of 4.0 m/s2 results.

Force = 100 N

Acceleration = 4.0 m/s²

We know that,

On substituting the values we get,

→ 100 N = Mass × 4.0

→ Mass = 100/4

→ Mass = 25 kg

Therefore, Weight of the crate is 25 kg.

The size of the induced emf is inversely proportional to the time it takes for the current to change and directly proportional to the number of turns and rate of change of magnetic flux. The induced emf will be double if the number of turns is doubled. The induced emf will also double if the time it takes for the current to change is cut in half.

To find the magnitude of the induced emf in this scenario, we can use Faraday's Law of Electromagnetic Induction which states that the induced emf is equal to the negative of the rate of change of magnetic flux. In this case, since the current is changing steadily in a coil, the magnetic flux is also changing. The formula to find the induced emf is:

emf = -N(dΦ/dt)

Where N is the number of turns in the coil, dΦ/dt is the rate of change of magnetic flux, and the negative sign indicates the direction of the induced emf. In this problem, we are given the current and the time it takes to change. We can use the formula for inductance:

L = Φ/I

Where L is the inductance of the coil, Φ is the magnetic flux, and I is the current. Solving for Φ, we get:

Φ = L*I

Since the inductance is given as 120 mH (millihenries) and the current changes from 22.0 A to 12.0 A in 310 ms (milliseconds), we can find the average current:

I = (22.0 A + 12.0 A)/2 = 17.0 A

Substituting this into the formula for Φ, we get:

Φ = 120 mH * 17.0 A = 2.04 mWb (milliWebers)

Now we can find the rate of change of magnetic flux:

dΦ/dt = (Φfinal - Φinitial)/(tfinal - tinitial)

Substituting the given values, we get:

dΦ/dt = (2.04 mWb - 0 mWb)/(310 ms - 0 ms) = 6.58 V/s (Volts per second)

Finally, we can find the induced emf:

emf = -N(dΦ/dt)

Since we are not given the number of turns in the coil, we cannot find the exact value of the induced emf. However, we can say that the magnitude of the induced emf is proportional to the number of turns and the rate of change of magnetic flux, and inversely proportional to the time it takes for the current to change. Therefore, if the number of turns is doubled, the induced emf will also be doubled. Similarly, if the time it takes for the current to change is halved, the induced emf will be doubled.

For more such questions on magnetic flux , click on:

https://brainly.com/question/31361829

#SPJ11

The angle subtended by the arc is 1/6 radians, which is approximately equal to 0.524 radians or 30 degrees.

To find the angle subtended by an arc of length 0.20 m on a circle of radius 1.20 m, we can use the formula for the arc length of a circle:

Arc Length = Radius x Central Angle

We can rearrange this formula to solve for the central angle:

Central Angle = Arc Length / Radius

Plugging in the given values, we get:

Central Angle = 0.20 m / 1.20 m

Simplifying, we get:

Central Angle = 1/6 radians

Therefore, the angle subtended by the arc is 1/6 radians, which is approximately equal to 0.524 radians or 30 degrees.

Learn more about arc of length

https://brainly.com/question/29886215

#SPJ4

The amount of work done is 1.35 J.

Calculating the Work Done on an Object: Formula and Terms. Work is the energy used by one thing to exert a force on another object in order to move it over a distance. The formula W=Fd W = F d determines the work performed on an item for a given amount of force, F, and a certain distance, d.

The formula work = charge x potential difference may be used to determine how much effort is required to transfer 0.15 C

of charge across a 9 V potential difference.

Work = 0.15 C x 9 V = 1.35 J is

the result of substituting the supplied values.

To now more about work done visit:-

https://brainly.com/question/10334435

#SPJ1

The kinetic energy gained by the air molecules from the falling object is 1.55 x 10⁶ J.

To calculate the kinetic energy gained by the air molecules from the falling object, we can use the work-energy principle, which states that the work done on an object is equal to its change in kinetic energy. In this case, the work done by the object on the air molecules is equal to its change in kinetic energy.

The work done by the object is equal to the force it exerts on the air molecules multiplied by the distance it falls. We can calculate the force using Newton's second law, which states that force is equal to mass times acceleration.

At terminal velocity, the acceleration of the object is zero, so the force is equal to the weight of the object, which is given by W = mg, where m is the mass of the object and g is the acceleration due to gravity (9.8 m/s²).

The distance the object falls is given as 100 m. Therefore, the work done by the object is equal to W = Fd = mgd = (3 kg) x (9.8 m/s²) x (100 m) = 2940 J.

Since the work done by the object is equal to its change in kinetic energy, we can calculate the kinetic energy gained by the air molecules as 1.55 x 10⁶ J, which is the difference between the initial potential energy of the object at the top of the cliff and its final kinetic energy at terminal velocity.

To know more about kinetic energy, refer here:
https://brainly.com/question/26472013#
#SPJ11

Answer:

in explanation...

Explanation:

Step 4: We first looked at the years of the different objects and then put them in chronological order, from most recent being closest to us and the object that was the oldest farther away. Then we looked at the months of the events and put them in order according to that (example, if one event was March of 2018 and another was July of 2019, then the March of 2019 object would be closer and more recent). By using this method, yes we were able to put them in chronological order.

Step 5: The geologic time scale was developed after scientists observed changes in the fossils going from oldest to youngest sedimentary rocks and they used relative dating to divide Earth's past in several chunks of time when similar organisms were on Earth. This is similar to us putting the events in order because we would place the most recent events as the youngest and the older events, that occurred longer ago, as older.  

Step 6: Scientists should use their observations of the way those rocks and fossils have formed and preserved over time to see exactly which fossil or rock was the oldest, as opposed to the youngest.