The emf tries to keep the current in the solenoid flowing in the counter-clockwise direction. When something moves in the opposite direction to the way in which the hands of a clock move round in known as counterclockwise.
To calculate the magnitude of the self-induced electromotive force (emf) produced by the increasing current in the solenoid, we can use Faraday's law of electromagnetic induction, which states that the emf induced in a coil is equal to the rate of change of magnetic flux through the coil.
The formula to calculate the emf is:
emf = -N * dΦ/dt
where N is the number of turns in the solenoid and dΦ/dt is the rate of change of magnetic flux.
Rate of change of current (di/dt) = 4.54 A/s (since current is increasing at this rate)
Cross-sectional area (A) = 3.14159 cm² = 0.000314159 m²
Length of the solenoid (l) = 21.4 cm = 0.214 m
Number of turns (N) = 395
First, we need to calculate the magnetic flux (Φ) through the solenoid.
The magnetic flux is given by the formula:
Φ = B * A
where B is the magnetic field and A is the cross-sectional area.
To calculate the magnetic field, we use the formula:
B = μ₀ * (N / l) * I
where μ₀ is the permeability of free space, N is the number of turns, l is the length of the solenoid, and I is the current.
Permeability of free space (μ₀) = 4π × 10⁻⁷ T·m/A
Calculations:
B = (4π × 10⁻⁷ T·m/A) * (395 / 0.214 m) * (4.54 A/s)
B ≈ 0.0332 T
Now, we can calculate the rate of change of magnetic flux (dΦ/dt):
dΦ/dt = B * A * (di/dt)
dΦ/dt = 0.0332 T * 0.000314159 m² * (4.54 A/s)
dΦ/dt ≈ 4.20 × 10⁻⁶ Wb/s
Finally, we can calculate the magnitude of the self-induced emf:
emf = -N * dΦ/dt
emf = -395 * (4.20 × 10⁻⁶ Wb/s)
emf ≈ -1.66 mV
The magnitude of the self-induced emf produced by the increasing current is approximately 1.66 mV.
Regarding the second part of your question, according to the right-hand rule, the self-induced emf tries to keep the current in the solenoid flowing in the same direction, which in this case is the counter-clockwise direction. So, the correct statement is: The emf tries to keep the current in the solenoid flowing in the counter-clockwise direction.
To knwo more baout electromotive force (emf)
https://brainly.com/question/31833293
#SPJ11
What distance does an oscillator of amplitude a travel in 9. 5 periods?
The distance traveled by an oscillator of amplitude a in 9.5 periods is equal to 9.5 times the circumference of the path traced by the oscillator, which is 9.5 times 2πa.
In an oscillator, the amplitude represents the maximum displacement from the equilibrium position. The distance traveled by an oscillator in one complete period is equal to the circumference of the path traced by the oscillator.
The circumference can be calculated using the formula:
Circumference = 2π × radius
In this case, the radius is equal to the amplitude (a). Therefore, the distance traveled in one period is:
Distance per period = 2πa
To find the total distance traveled in 9.5 periods, we can multiply the distance per period by the number of periods:
Total distance = Distance per period × Number of periods
= 2πa × 9.5
Learn more about oscillator here :-
https://brainly.com/question/15780863
#SPJ11
Waves that move at a right angle to the direction of the wave are called
same direction as the wave are called
waves.
Waves in which the disturbance moves in the same direction as the wave are called .
waves. waves are two transverse waves that travel together and are at right angles to each other.
Design a second-order low pass filter to filter signals with more
than 100KHz frequencies by using multisim or proteus
To design a second-order low-pass filter capable of attenuating frequencies above 100kHz, software tools like Multisim or Proteus can be utilized.
To design a second-order low pass filter to filter signals with more than 100KHz frequencies by using Multisim or Proteus, follow the steps given below:
Step 1: Choose the type of filter
The first step in designing a filter is to select the type of filter you want to use. A second-order low pass filter will be used in this case.
Step 2: Determine the cut-off frequency
The cut-off frequency determines the point at which the filter begins to attenuate signals. In this case, we need a cut-off frequency of 100kHz, so we will set this value for our filter.
Step 3: Calculate the component values
Once you have determined the cut-off frequency, you can calculate the values of the components you will need for your filter. For a second-order low pass filter, you will need two capacitors and two resistors. The formulae for calculating the component values are as follows:
For the resistor (R):
R = 1 / (2 * π * f * C)
For the capacitor (C):
C = 1 / (2 * π * f * R)
where R is the resistance, C is the capacitance, and f is the cut-off frequency.
For example, if we want a cut-off frequency of 100kHz and we have a capacitor of 1uF, we can calculate the value of the resistor as follows:
R = 1 / (2 * π * (100,000 Hz) * (1e-6 F))
We can use this value to calculate the other resistor and capacitor values.
Step 4: Build the circuit
Once you have calculated the component values, you can build the circuit using Multisim or Proteus. The circuit will consist of two capacitors and two resistors connected in a specific way to create the desired filter.
Step 5: Test the circuit
Finally, you can test the circuit to ensure that it is working properly. You can input signals with frequencies greater than 100kHz and observe the output to ensure that the filter is attenuating these signals. If the filter is working properly, the output signal should be lower than the input signal.
Learn more about Proteus: https://brainly.com/question/31740946
#SPJ11
A 79 kg man is pushing a 31 kg shopping trolley. The man and the shopping trolley move forward together with a maximum forward force of 225 N. Assuming friction is zero, what is the magnitude of the force (in N) of the man on the shopping trolley?
Hint: It may be easier to work out the acceleration first.
Hint: Enter only the numerical part of your answer to the nearest integer.
The magnitude of the force (in N) of the man on the shopping trolley is 64 N.
The magnitude of the force (in N) of the man on the shopping trolley is 172 N.Let's calculate the acceleration of the man and the shopping trolley using the formula below:F = maWhere F is the force, m is the mass, and a is the acceleration.The total mass is equal to the sum of the man's mass and the shopping trolley's mass. So, the total mass is 79 kg + 31 kg = 110 kg.The maximum forward force is given as 225 N. Therefore,225 N = 110 kg x aSolving for a gives,a = 2.0455 m/s².
Now, let's calculate the force (in N) of the man on the shopping trolley. Using Newton's second law of motion,F = maWhere F is the force, m is the mass, and a is the acceleration.Substituting the values we have, we get:F = 31 kg x 2.0455 m/s²F = 63.5 NTherefore, the magnitude of the force (in N) of the man on the shopping trolley is:F + 79 kg x 2.0455 m/s² = F + 161.44 N (By Newton's Second Law)F = 225 N - 161.44 NF = 63.56 N ≈ 64 N.Rounding it off to the nearest integer, the magnitude of the force (in N) of the man on the shopping trolley is 64 N.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
Find the attached image illustrates the thermal resistance model for two devices mounded on single heatsink : Tj1 1 kQ 1 kQ www ww Rjc1 Device Ta 1 KQ 1 www Rsa Tj2 1kQ 1 ΚΩ www www Rcs2 Device Rjc2 2 Where, * Tj1 - Device 1 junction temperature = 180°C * Tj2 - Device 2 junction temperature = 180°C * Rjc1 - Device 1 junction to case thermal resistance = 4 K/W * Rjc2 - Device 2 junction to case thermal resistance = 2 K/W * Rcs1,Rcs2 - Device 1 and device 2 case to heatsink thermal resistance (heatsink grease) = 0.038 K/W * Rsa - heat sink thermal resistance ( need to be find). * Ta - ambient temperature = 40°C * The formula for heatsink (as specifically available based on its thermal resistance, Rsa) is * Rsa = Tj1 - Ta - Pd1 (Rjc1 + Rcs1)/(Pd1 + Pd2) Where, * Pd1 - power dissipated by device 1 * Pd2 - power dissipated by device 2 * Then, * Rsa = 180 - 40 - 16(4+0.038) / (16+24) * Rsa = 1.88 K/W * The heatsink thermal resistance (Rsa) = 1.88 K/W. Rcs1
Two MOSFETS are used to control the brightness of a high power spotlight. Under maximum power both MOSFETS in the circuit as shown are conducting. M1 dissipates a maximum of 16 W and has a junction to case thermal resistance of 4 K/W. M2 dissipates a maximum of 24 W and has a junction to case thermal resistance of 2 K/W. Both MOSFETs are mounted on a common heatsink (with isolation). The maximum junction temperature of the MOSFETs is 180 °C and the circuit must operate in an ambient temperature of 40 °C. Please assist with getting the required heatsink. A thermal circuit will aid my understanding so please draw the thermal circuit first.
The problem involves two MOSFETs mounted on a common heatsink, and the goal is to determine the required thermal resistance of the heatsink.
Given the power dissipation and thermal resistance values of the MOSFETs, along with the maximum junction temperature and ambient temperature, the thermal circuit needs to be analyzed to find the required heatsink thermal resistance.
To analyze the thermal circuit and determine the required heatsink thermal resistance, we can start by visualizing the circuit as a thermal network. The key components in the circuit are the MOSFETs (M1 and M2), their junction-to-case thermal resistances (Rjc1 and Rjc2), the case-to-heatsink thermal resistances (Rcs1 and Rcs2), and the unknown heatsink thermal resistance (Rsa). We also have the maximum junction temperature (Tj1 = Tj2 = 180°C) and the ambient temperature (Ta = 40°C).By applying the thermal circuit equations, we can write the following expression to calculate Rsa:
Rsa = (Tj1 - Ta - Pd1 * (Rjc1 + Rcs1)) / Pd1
where Pd1 is the power dissipated by device M1 (16 W) and Rjc1 is the junction-to-case thermal resistance of M1 (4 K/W). We can substitute these values into the equation and solve for Rsa.
Similarly, for M2, we have:
Rsa = (Tj2 - Ta - Pd2 * (Rjc2 + Rcs2)) / Pd2
where Pd2 is the power dissipated by device M2 (24 W) and Rjc2 is the junction-to-case thermal resistance of M2 (2 K/W).
Once we have the values of Rsa from both equations, we can compare them and choose the larger value as the required heatsink thermal resistance to ensure proper heat dissipation and keep the MOSFETs within their maximum temperature limits.
In conclusion, by constructing the thermal circuit and applying the thermal equations, we can determine the required heatsink thermal resistance (Rsa) to keep the MOSFETs within their temperature limits. This ensures the reliable operation of the circuit under the given power dissipation and ambient temperature conditions. The thermal circuit analysis helps in understanding the heat flow and designing effective cooling solutions to maintain the components at safe operating temperatures.
Learn more about resistance here:- brainly.com/question/29427458
#SPJ11
&=8.854x10-¹2 [F/m] lo=4r×107 [H/m] 12) A distortionless transmission line has an attenuation constant of 1.00×10³ Np/m. The line parameters are L = 5μH/m and R=1.092/m. From the information provided, we may conclude that the phase velocity (in m/s) along the line equals: a) 2x108 b) 108 c) 5x107 d) 1.5x108 e) None of the above. 13) The electric field of a TEM plane wave propagating in air has is given by E = 10a cos(at-3x - 4y) [V/m]. The angular frequency [rad/s] of the wave equals: a) 1×10⁹ b) 3x10⁹ c) 1.5×10⁹ d) 3.5×10⁹ e) 0.9×10⁰
The angular frequency of the wave equals 3x10⁹ rad/s. Hence, the correct option is b) 3x10⁹.
Given, Electric field of a TEM plane wave propagating in air is
E = 10a cos(at-3x - 4y) [V/m].
Here, the expression for an electromagnetic wave is of the form:
cos(wt - kz + phi)
where, w = angular frequency,
k = w/c = wave number, and
phi = phase constant.
So, the given expression of the electric field has to be reduced to this form.
First, compare the given expression with the general equation:
cos(wt - kz + phi)
Here,
w = angular frequency
k = 3/c = 3x10⁹/3x10⁸ = 10 rad/ms= 10x10⁶ rad/sw = 3x10⁹ rad/s
Comparing the coefficients of cos in the two expressions, we get:
w = 3x10⁹ rad/s
Hence, the correct option is b) 3x10⁹.
learn more about angular frequency here:
https://brainly.com/question/30897061
#SPJ11
A stone is thrown from a point A with speed 21 m/s at an angle of 22 degree below the horizontal. The point A is 25 m above the horizontal ground. Find the horizontal range of the stone in meter. Give your answer with one decimal place.
Answer: the horizontal range of the stone is approximately 86.95 m.
A stone is thrown from a point A with speed 21 m/s at an angle of 22 degree below the horizontal. The point A is 25 m above the horizontal ground. the horizontal range:
Speed of the stone, v = 21 m/s
Angle made by the stone with the horizontal, θ = 22°
Height of the point A, h = 25 m
The horizontal range of the stone is given by:
R = v² sin 2θ / g Where, g = 9.8 m/s²R = 21² sin 2(22°) / 9.8 = 86.95 m
Therefore, the horizontal range of the stone is approximately 86.95 m.
Learn more about horizontal range : https://brainly.com/question/12870645
#SPJ11
An electron is at the origin.
(a) Calculate the electric potential VA at point A, x = 0.315 cm.
V
(b) Calculate the electric potential VB at point B, x = 0.605 cm.
V
What is the potential difference VB - VA?
V
(c) Would a negatively charged particle placed at point A necessarily go through this same potential difference upon reaching point B? Explain
In the given scenario, the electric potential at point A (x = 0.315 cm) is calculated, resulting in VA. Similarly, the electric potential at point B (x = 0.605 cm) is calculated, resulting in VB. The potential difference VB - VA is then determined.
To calculate the electric potential at point A (VA), we need to determine the potential due to the electron's charge. The electric potential at a point due to a point charge can be calculated using the equation V = k * q / r, where V is the electric potential, k is the electrostatic constant, q is the charge, and r is the distance from the charge. Plugging in the values, we can calculate VA.
Similarly, to calculate the electric potential at point B (VB), we use the same formula with the given distance.
The potential difference VB - VA can be obtained by subtracting the value of VA from VB. This yields the difference in electric potential between the two points.
When a negatively charged particle is placed at point A and moves towards point B, it will experience a change in electric potential. However, whether it goes through the same potential difference depends on the path taken. If the path from A to B is along equipotential surfaces (lines of constant electric potential), the potential difference will be the same. However, if the path deviates and crosses different equipotential surfaces, the potential difference experienced by the particle may be different. The potential difference is only the same when the path is along equipotential surfaces.
Learn more about potential difference here:
https://brainly.com/question/23716417
#SPJ11
A coordinate system (in meters) is constructed on the surface of a pool table, and three objects are placed on the table as follows: a m 1
=1.8−kg object at the origin of the coordinate system, a m 2
=3.3−kg object at (0,2.0), and a m 3
=5.1−kg object at (4.0,0). Find the resultant gravitational forcee exerted by the other two objects on the object at the origin. magnitude direction Need Help?
To find the resultant gravitational force exerted by the other two objects on the object at the origin of the coordinate system, we need to calculate the individual gravitational forces between each pair of objects and then find the vector sum of these forces.
The gravitational force between two objects can be calculated using the formula F = G * (m1 * m2) / r^2, where F is the gravitational force, G is the gravitational constant, m1, and m2 are the masses of the two objects, and r is the distance between them.
In this case, we have three objects: m1 = 1.8 kg at the origin, m2 = 3.3 kg at (0,2.0), and m3 = 5.1 kg at (4.0,0). To find the resultant gravitational force on m1, we need to calculate the gravitational forces between m1 and m2, and between m1 and m3, and then find the vector sum of these forces.
Using the formula mentioned above, we can calculate the magnitude and direction of each gravitational force. To find the resultant force, we add the vector components of the forces and determine the magnitude and direction of the resultant force.
Learn more about gravitational forces here:
https://brainly.com/question/32609171
#SPJ11
A wave is represented by the equation = . ( − ), where x and y in meters, t in seconds. Find the amplitude, wavelength, frequency, wave speed and direction. Find the displacement at t = 0.05 second and at a point x = 0.40 m.
the specific values for the amplitude, wavelength, frequency, wave speed, direction, and displacement at t = 0.05 s and x = 0.40 m can be determined by applying the equations and substituting the given values.
The equation for the wave is given as y(x, t) = A sin(kx - ωt), where:A represents the amplitude of the wave.k is the wave number, related to the wavelength λ by the equation k = 2π/λ.ω is the angular frequency, related to the frequency f by the equation ω = 2πf.From the equation, we can deduce the following information:The amplitude of the wave is equal to A.
The wavelength λ can be determined by the equation λ = 2π/k.The frequency f is given by f = ω/(2π).The wave speed v is related to the frequency and wavelength by the equation v = λf = ω/k.The direction of the wave can be determined by observing the sign of the coefficient of x in the equation.
A positive sign indicates a wave propagating in the positive x-direction, and a negative sign indicates a wave propagating in the negative x-direction.To find the displacement at a specific time and position, we substitute the given values of t and x into the equation y(x, t) and evaluate it.By using the given equation and substituting the provided values of t = 0.05 s and x = 0.40 m, we can calculate the displacement at that point in the wave.Therefore, the specific values for the amplitude, wavelength, frequency, wave speed, direction, and displacement at t = 0.05 s and x = 0.40 m can be determined by applying the equations and substituting the given values.
Learn more about wave here:
https://brainly.com/question/25954805
#SPJ11
An 80kg man is standing in an elevator. Determine the force of the elevator onto the person if the elevator is coming to stop in going upward at a deceleration of -2.5m/s² 890 N 580 N 980 N 780 N 47
The correct answer is 980N.
What is an elevator?
An elevator is a machine that is used for vertical transportation of people and goods. An elevator typically moves along vertical rails that are anchored to the building's support structure. Elevators are commonly used in buildings that have more than one floor. The elevator is held by an overhead cable or hydraulic system, which supports the car that contains the people or goods. An 80 kg man is standing in an elevator going upward.
The acceleration of the elevator is decelerating, which means it is slowing down. The man is experiencing the force of the elevator and his weight. The force of the elevator on the person can be determined using the formula:
F = m(a+g)
F = 80(9.81-2.5)
F = 628.8 N
The force of the elevator on the person is 628.8 N. Since the elevator is moving upward, the force acting on the person is the sum of his weight and the force of the elevator on him. Thus,
Fnet = F - mg
Fnet = 628.8 - 784
Fnet = -155.2 N
Since the net force is negative, the elevator's force on the person is 980 N, which is the answer.
Learn more about decelerating here
https://brainly.com/question/75351
#SPJ11
C4 & C5, CO2 & CO3, PO2, PO3, PO9 and PO10) (ii) By referring Fig. 1 [Merujuk Kepada Rajah. 1] 8255 PP) TOR TOW AS X Decoder M 74151.98 AS Qs -c PAO-PAT PA PBO-PB7 PB POD PC A1 AO 8255 STOK AZ A₂ 3x8 Decoder 01 02 03 AT AO Figure 1 [Rajah 1] (i) Compute the address of port A, port B, Port C and the control register. [Kirakan alamat pelabuhan A, pelabuhan B, pelabuhan C dan daftar kawalan.] [6 marks/markah] (ii) Write an assembly program to input two numbers from switch 1 and switch 2. Switch 1 is connected to port A and switch 2 is connected to port B. Add the 2 numbers from both port and display the results on 7 segments connected to port C (Note that SEG 1 display the low order result value and SEG 2 display the high order result value). (iii) [Tulis program pemasangan untuk input dua nombor suis 1 dan suis 2. switch 1 disambungkan kepada port A dan suis 2 disambung kepada port B. Tambahkan nombor dari kedua-dua port dan paparkan hasil taunbah pada 7 segmen yang disambung ke port C. (Perhatikan bahawa SEG I paparan nilai hasil usaha yang rendah dan SEG 2 paparan nilai hasil usaha yang tinggi)]
The given question involves the 8255 Programmable Peripheral Interface (PPI) and requires two main tasks to be performed. First, the address of port A, port B, port C, and the control register of the 8255 PPI needs to be computed.
Second, an assembly program needs to be written to input two numbers from switch 1 (connected to port A) and switch 2 (connected to port B), add these numbers, and display the result on a 7-segment display connected to port C. The question also mentions that SEG 1 will display the low-order result value and SEG 2 will display the high-order result value. The 8255 Programmable Peripheral Interface (PPI) is a widely used integrated circuit that provides parallel I/O (input/output) capabilities. It consists of three 8-bit ports (port A, port B, and port C) and a control register. Each port can be configured as input or output.
In the first part of the question, the task is to compute the addresses of port A, port B, port C, and the control register. These addresses are important for accessing and manipulating the data stored in the ports and control register of the 8255 PPI. The specific addresses can be determined based on the addressing scheme used by the system or microcontroller where the 8255 PPI is connected.
In the second part of the question, an assembly program needs to be written to perform a specific task using the 8255 PPI. The task involves inputting two numbers from switch 1 (connected to port A) and switch 2 (connected to port B), adding these numbers, and displaying the result on a 7-segment display connected to port C. It is mentioned that SEG 1 will display the low-order result value and SEG 2 will display the high-order result value. The assembly program should include instructions for reading the values from port A and port B, performing the addition operation, and sending the result to the appropriate segments of the 7-segment display connected to port C.
In conclusion, the question involves working with the 8255 Programmable Peripheral Interface (PPI) to compute addresses of ports and the control register, as well as writing an assembly program to perform specific tasks using the 8255 PPI. The assembly program should include instructions for inputting numbers from switches, performing calculations, and displaying the results on a 7-segment display. The 8255 PPI is a versatile device commonly used in microcontroller-based systems for interfacing with external devices and performing parallel I/O operations.
Learn more about microcontroller here:- brainly.com/question/31856333
#SPJ11
What is the required radius of a cyclotron designed to accelerate protons to energies of 36.0MeV using a magnetic field of 5.18 T ?
The required radius of the cyclotron is 0.33 meters
A cyclotron is a device that is used to accelerate charged particles to high energies by the application of high-frequency radio-frequency (RF) electromagnetic fields.
It works on the principle of a charged particle moving perpendicular to a magnetic field line. When the particle moves perpendicular to the magnetic field lines, it experiences a force that makes it move in a circular path. The radius of a cyclotron can be calculated using the formula: r = mv/qB
where m is the mass of the particle, v is its velocity, q is its charge, and B is the magnetic field strength.
In this case, we are given that the protons are to be accelerated to energies of 36.0 MeV using a magnetic field of 5.18 T. The mass of a proton is 1.67 x 10⁻²⁷ kg, and its charge is 1.6 x 10⁻¹⁹ C.
The energy of the proton is given by E = mv²/2.
Solving for v, we get:v = √(2E/m) = √(2 x 36 x 10⁶ x 1.6 x 10⁻¹⁹/1.67 x 10⁻²⁷) = 3.02 x 10⁷ m/s
Substituting these values into the formula for r, we get:r = mv/qB = (1.67 x 10⁻²⁷ x 3.02 x 10⁷)/(1.6 x 10⁻¹⁹ x 5.18) = 0.33 m
Therefore, the required radius of the cyclotron is 0.33 meters (or 33 cm).
To learn about magnetic fields here:
https://brainly.com/question/14411049
#SPJ11
A rifle with a weight of 20 N fires a 5.5-g bullet with a speed of 290 m/s. (a) Find the recoil speed of the rifle. mis (b) If a 675-N man holds the rifle firmly against his shoulder, find the recoil speed of the man and rifle. m/s
The recoil speed of the man and the rifle is approximately 0.223 m/s in the opposite direction of the bullet.
(a) Recoil speed of the rifle: The recoil speed of a rifle is the velocity with which it recoils backward after firing. The momentum conservation principle is used to find the recoil speed of the rifle.The mass of the bullet m = 5.5 g = 5.5/1000 kg
Velocity of the bullet v = 290 m/s
Since the initial momentum of the rifle and bullet is zero, the total momentum is also zero. If the velocity of the rifle is v, then we can write that(20 N) (v) = (-m) (v) + m (290 m/s)
Here, the negative sign for m is due to the bullet moving in the opposite direction. Solving the above equation for v, we getv = - (m v) / (20 N + m)= - (5.5/1000 kg × 290 m/s) / (20 N + 5.5/1000 kg)≈ -0.0804 m/s
Therefore, the recoil speed of the rifle is approximately 0.0804 m/s in the opposite direction of the bullet.(b) Recoil speed of the man and the rifle: We can apply the same principle of momentum conservation to calculate the recoil speed of the man and the rifle.
The initial momentum of the man, rifle, and bullet is zero. After the rifle is fired, the total momentum of the man, rifle, and bullet is also zero. Let the combined mass of the man and rifle be M. Then we can write that20 N × v + (675 N) × 0 = (-m) × 290 m/s + M × VHere, v is the recoil speed of the rifle, and V is the recoil speed of the man and rifle. Solving the above equation for V, we get V = m × 290 m/s / M≈ 0.223 m/s
Therefore, the recoil speed of the man and the rifle is approximately 0.223 m/s in the opposite direction of the bullet.
Learn more about momentum here,
https://brainly.com/question/1042017
#SPJ11
You reproduce Young's experiment using a helium-neon laser. If the distance
between five black bangs is 2.1 cm, the distance from the screen is 2.5 m and the distance
between the two slits is 0.30 mm, determine the wavelength of the laser.
To determine the wavelength of a helium-neon laser in Young's experiment, we can use the formula for fringe separation.
Given the distance between five black bands, the distance from the screen, and the distance between the two slits, we can calculate the wavelength of the laser.
In Young's experiment, the fringe separation can be given by the formula Δy = λL/d, where Δy is the distance between fringes (in this case, the distance between five black bands), λ is the wavelength of the laser, L is the distance from the screen, and d is the distance between the two slits.
Rearranging the formula, we have λ = Δy * d / L. Plugging in the given values of Δy = 2.1 cm, d = 0.30 mm, and L = 2.5 m, we can calculate the wavelength of the laser.
Learn more about fringe separation here:
https://brainly.com/question/12288897
#SPJ11
How does multi-beam interference increases sharpness of bright fringes?
In multi-beam interference, the interference fringes become sharper due to the constructive and destructive interference of light waves. Multi-beam interference can increase the sharpness of bright fringes by allowing the interference patterns of multiple beams to overlap, creating a more defined and intricate pattern.
In this type of interference, light waves coming from different sources interfere with each other. This results in the formation of fringes of maximum and minimum light intensity known as interference fringes. Multi-beam interference increases the sharpness of bright fringes due to the addition of multiple waves with a specific phase relation.
When the beams of light from multiple sources intersect, the crests and troughs of the waves merge, causing bright fringes to become more pronounced. The sharpness of bright fringes is determined by the angle of incidence and the number of beams that interfere with each other. When the number of beams increases, the sharpness of the fringes also increases.
Therefore, multi-beam interference is essential in many scientific fields where the resolution of bright fringes is important. For instance, in optical metrology, multi-beam interference is used to measure the thickness of thin films and to study the surface quality of materials.
In conclusion, multi-beam interference increases the sharpness of bright fringes by overlapping interference patterns of multiple beams and creating more defined and intricate patterns.
Learn more about interference at: https://brainly.com/question/14086383
#SPJ11
A 97 kg person receives a whole-body radiation dose of 1.9 x 10⁻⁴Gy, delivered by alpha particles for which the RBE factor is 13. Calculate (a) the absorbed energy and the dose equivalent in (b) sieverts and (c) rem.
(a) Number ____________ Units ____________
(b) Number ____________ Units ____________
(c) Number ____________ Units ____________
(a) The number of absorbed energy is calculated to be 0.24033 J. The units for absorbed energy are joules (J). (b) The dose equivalent is calculated to be 0.00247 Sv. The units for dose equivalent are sieverts (Sv). (c) The dose equivalent in rem is 0.247 rem. The units for dose equivalent in rem is rem.
(a) The absorbed energy can be calculated by multiplying the absorbed dose, RBE factor, and mass of the person. In this case, the absorbed energy is found to be 0.24033 J.
(b) The dose equivalent is obtained by multiplying the absorbed dose and the quality factor. For alpha radiation, the quality factor is 13. Thus, the dose equivalent is calculated as 0.00247 Sv.
(c) The dose equivalent in rem is derived by converting Sv to rem. To convert, the dose equivalent in Sv is multiplied by 100. Therefore, the dose equivalent in rem is found to be 0.247 rem.
In summary, the absorbed energy is 0.24033 J, the dose equivalent is 0.00247 Sv, and the dose equivalent in rem is 0.247 rem.
Learn more about energy at: https://brainly.com/question/2003548
#SPJ11
Early 20th-century models predicted that a hydrogen atom would be approximately 10⁻¹⁰ in "size." (a) Assuming that the electron and proton are separated by r = 1.0 x 10⁻¹⁰ m, calculate the magnitude (in N) of the electrostatic force attracting the particles to each other. _________ N (b) Calculate the electrostatic potential energy (in eV) of a hydrogen atom (an atom containing one electron, one proton, and possibly one, two, or three neutrons-which do not participate in electrostatic interactions). ____________ eV
(a) Assuming that the electron and proton are separated by r = 1.0 x 10⁻¹⁰ m, calculate the magnitude (in N) of the electrostatic force attracting the particles to each other2.304N.(b)The electrostatic potential energy of a hydrogen atom is approximately -14.4 × 10^(19) eV.
(a) To calculate the magnitude of the electrostatic force between the electron and proton in a hydrogen atom, we can use Coulomb's law. Coulomb's law states that the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
Coulomb's law equation:
F = k × (|q₁| × |q₂|) / r^2
where F is the force, k is the electrostatic constant (9 × 10^9 N m²/C²), q₁ and q₂ are the magnitudes of the charges, and r is the distance between the charges.
In the case of a hydrogen atom, the charges involved are the charge of the electron (e = 1.6 × 10^(-19) C) and the charge of the proton (e = 1.6 × 10^(-19) C). The distance between them is given as r = 1.0 × 10^(-10) m.
Substituting the values into the equation:
F = (9 × 10^9 N m²/C²) × ((1.6 × 10^(-19) C) × (1.6 × 10^(-19) C)) / (1.0 × 10^(-10) m)²
F ≈ 2.304 N
Therefore, the magnitude of the electrostatic force attracting the electron and proton in a hydrogen atom is approximately 2.304 N.
(b) The electrostatic potential energy of a hydrogen atom can be calculated using the equation:
Potential energy = -k × (|q₁| * |q₂|) / r
In this case, we consider the potential energy of the electron and proton interaction.
Substituting the given values:
Potential energy = -(9 × 10^9 N m²/C²) × ((1.6 × 10^(-19) C) × (1.6 × 10^(-19) C)) / (1.0 × 10^(-10) m)
Potential energy ≈ -2.304 J
To convert the potential energy from joules (J) to electron volts (eV), we can use the conversion factor:
1 eV = 1.6 × 10^(-19) J
Converting the potential energy:
Potential energy = (-2.304 J) / (1.6 × 10^(-19) J/eV)
Potential energy ≈ -14.4 × 10^(19) eV
Therefore, the electrostatic potential energy of a hydrogen atom is approximately -14.4 × 10^(19) eV.
To learn more about Coulomb's law visit: https://brainly.com/question/506926
#SPJ11
Find the wavelength of a 10^6 Hz EM wave.
The wavelength of the EM wave is 0.3 meters (or 30 centimeters).
The frequency of an electromagnetic wave is 10⁶ Hz. Find the wavelength of this EM wave.The velocity of light in a vacuum is 3 x 10⁸ m/s.
The formula for the wavelength is given by;
Wavelength (λ) = Speed of light (c) / Frequency (f)
λ = c / f= 3 x 10⁸ m/s / 10⁶ Hz = 300 m/s ÷ 10⁶ Hz= 0.3 meters or 30 centimeters
Therefore, the wavelength of the EM wave is 0.3 meters (or 30 centimeters).
Know more about wavelength here,
https://brainly.com/question/32900586
#SPJ11
What is the angle of the 1st order dark fringe created when a light with a wavelength of 6.24x10⁻⁷m is sent through a set of slits that are 9.18x10⁻⁶m apart? A. 0.102° B. 3.90⁰ C. 5.85⁰ D. 0.0680⁰
The angle of the first-order dark fringe is approximately 3.90° (option B).
To find the angle of the first-order dark fringe, we can use the formula for the fringe spacing in a double-slit interference pattern:
sin(θ) = mλ/d
Where:
θ is the angle of the fringe,
m is the order of the fringe (in this case, m = 1 for the first-order fringe),
λ is the wavelength of the light, and
d is the slit spacing.
Plugging in the values:
m = 1
λ = 6.24x10⁻⁷ m
d = 9.18x10⁻⁶ m
sin(θ) = 1 × (6.24x10⁻⁷ m) / (9.18x10⁻⁶ m)
sin(θ) ≈ 0.068
To find the angle θ, we can take the inverse sine (sin⁻¹) of 0.068:
θ ≈ sin⁻¹(0.068)
θ ≈ 3.90°
To know more about wavelength
https://brainly.com/question/31326088
#SPJ11
A 230 000 V-rms power line carries an average power PAV = 25 MW over a distance of 100 km. If the total resistance of the wires is 10 ohms, what is the resistive power loss?
A.
12 kW
B.
2.5 MW
C.
1.0 MW
D.
12 MW
E.
3.4 MW
The correct option is B. The resistive power loss in the power line is 2.5 MW. The resistive power loss in a power line is calculated using the formula [tex]P_l{oss} = I^2 * R[/tex].
The resistive power formula is [tex]P_l{oss} = I^2 * R[/tex], where[tex]P_{loss}[/tex] is the power loss, I is the current flowing through the wires, and R is the resistance. For determining the current, the formula used is:
[tex]PAV = I^2 * R[/tex],
where PAV is the average power and solves for I.
Rearranging the formula,
[tex]I = \sqrt(PAV / R).[/tex]
Substituting the given values, [tex]I = \sqrt(25 MW / 10 ohms) = \sqrt(2.5 MW) = 1.58 kA[/tex] (kiloamperes).
Now, calculate the resistive power loss by substituting the values into the formula:
[tex]P_{loss} = I^2 * R. P_{loss} = (1.58 kA)^2 * 10 ohms = 2.5 MW[/tex].
Therefore, the resistive power loss in the power line is 2.5 MW.
Hence, the correct option is B.
Learn more about current here:
https://brainly.com/question/2285102
#SPJ11
An aluminum ring of radius r 1
=5.00 cm and a resistance of 2.55×10 −4
Ω is placed around one end of a long air-core solenoid with 1040 turns per meter and radius r 2
=3.00 cm as shown in the figure below. Assume the axial component of the field produced by the solenoid is one-half as strong over the area of the end of the solenoid as at the center of the solenoid. Also assume the solenoid produces negligible field outside its cross-sectional area. The the current in the solenoid in (a) What is the induced current in the ring? A (b) At the center of the ring, what is the magnitude of the magnetic field produced by the induced current in the ring? μT (c) At the center of the ring, what is the direction of the magnetic field produced by the induced current in the ring? to the left to the right upward downward
Therefore, the axial component of magnetic field at the center of the solenoid will be given by: μ0nI... (i)Given, radius of the solenoid, r2 = 3.00 cmNumber of turns per meter, n = 1040 turns/meter.
(a) Induced current in the ring The magnetic field, B due to the solenoid at the center can be given by μ0nI. Here, μ0 is the permeability of air which is equal to 4π×10−7 TmA^−1, n is the number of turns per unit length of the solenoid and I is the current flowing through it. Therefore, the axial component of magnetic field at the center of the solenoid will be given by: μ0nI... (i)Given, radius of the solenoid, r2 = 3.00 cmNumber of turns per meter, n = 1040 turns/meter. Thus, the magnetic field at the center of the solenoid, B = (4π×10−7)(1040)I = 4.17×10−4I TOn the other hand, the magnetic field at the end of the solenoid will be one-half as strong over the area of the end of the solenoid as at the center of the solenoid. Hence, the axial component of magnetic field at the end of the solenoid will be: μ0nI2... (ii)Given, radius of the aluminum ring, r1 = 5.00 cm Resistance of the aluminum ring, R = 2.55×10−4 ΩThe induced current, I′ in the aluminum ring can be calculated using the formula: I′=Bπr12R... (iii)Therefore, substituting the given values in the above equation, we get: I′ = (2.08×10−6)I AThus, the induced current in the ring is 2.08×10−6I A.(b) Magnitude of the magnetic field produced by the induced current at the center of the ringThe magnitude of the magnetic field at the center of the ring due to the induced current is given by: B′=μ0I′2R2... (iv)Substituting the given values in the above equation, we get: B′=3.38×10−10|I| TTherefore, the magnitude of the magnetic field produced by the induced current at the center of the ring is 3.38×10−10|I| T.(c) Direction of the magnetic field produced by the induced current at the center of the ring The direction of the magnetic field produced by the induced current in the ring can be obtained using the right-hand rule. Place the thumb of the right hand in the direction of the current in the ring which is opposite to the current direction in the solenoid. The fingers curl in the direction of the magnetic field. Since the current in the ring is opposite to the current direction in the solenoid, the direction of the magnetic field produced by the induced current in the ring will be upwards. Answer: (a) 2.08×10−6I A(b) 3.38×10−10|I| T(c) Upward.
To know more about current visit:
https://brainly.com/question/31649017
#SPJ11
Calculate the resistance of a wire which has a uniform diameter 11.62mm and a length of 75.33cm if the resistivity is known to be 0.00083 ohm.m. Give your answer in units of Ohms up to 3 decimals. Taken as 3.1416
The resistance of the wire is 2.007 Ohms.
To calculate the resistance of the wire, we can use the formula R = (ρ × L) / A, where R is the resistance, ρ is the resistivity, L is the length of the wire, and A is the cross-sectional area of the wire.
First, let's calculate the cross-sectional area of the wire. The diameter is given as 11.62 mm, which corresponds to a radius of 5.81 mm or 0.00581 m. The formula for the area of a circle is A = π × [tex]r^{2}[/tex], where r is the radius. Substituting the values, we have A = 3.1416 × [tex](0.00581 m)^{2}[/tex].
Next, we can substitute the given values into the resistance formula. The resistivity is given as 0.00083 ohm.m and the length is 75.33 cm, which is equal to 0.7533 m.
Calculating the resistance, we have R = (0.00083 ohm.m × 0.7533 m) / (3.1416 × [tex](0.00581 m)^{2}[/tex]).
Performing the calculations, the resistance of the wire is approximately 2.007 ohms (rounded to 3 decimal places). Therefore, the resistance of the wire is 2.007 Ohms.
Learn more about resistance here:
https://brainly.com/question/29427458
#SPJ11
Two parallel wires are 10.0 cm apart, and each carries a current of 40.0 A.
(a) If the currents are in the same direction, find the force per unit length exerted on one of the wires by the other.
N/m
(b) Repeat the problem with the currents in opposite directions.
N/m
The force per unit length exerted on one wire by the other when the currents are in the same direction is 0.032 N/m and when the currents are in opposite directions is -0.032 N/m.
When two parallel wires carry currents, they exert forces on each other due to the magnetic fields they produce. If the currents are in the same direction, the force per unit length exerted on one wire by the other can be calculated using the formula
[tex]F = (μ0 * I1 * I2 * L) / (2πd),[/tex]
Where F is the force, μ0 is the permeability of free space, I1 and I2 are the currents in the wires, L is the length of the wire segment, and d is the distance between the wires. If the currents are in opposite directions, the force per unit length can be calculated using the same formula but with one of the currents being negative. In the given problem, the wires are 10.0 cm apart, and each carries a current of 40.0 A.
(a) When the currents in the wires are in the same direction, the force per unit length can be calculated as follows:
[tex]F = (μ0 * I1 * I2 * L) / (2πd)= (4π * 10^-7 T·m/A * 40.0 A * 40.0 A * L) / (2π * 0.1 m)= (32 * 10^-5 * L) / 0.1= 0.032 * L[/tex]
(b) When the currents in the wires are in opposite directions, the force per unit length can be calculated as follows:
[tex]F = (μ0 * I1 * I2 * L) / (2πd)= (4π * 10^-7 T·m/A * 40.0 A * (-40.0 A) * L) / (2π * 0.1 m)= (-32 * 10^-5 * L) / 0.1= -0.032 * L[/tex]
and the negative sign indicates that the forces are attractive, pulling the wires toward each other.
To learn more about currents
brainly.com/question/15141911
#SPJ11
In the circuit shown in the figure, the ideal ammeter reads 1.50 A in the direction shown. Which answer choice below gives a set of equations which would allow you to solve for the unknowns I 2
,I 3
, and ε ? 1. 50 A+I 2
=I 3
:ε−I 3
(48.0Ω)−I 1
(15.0Ω)=0 75 V+(1.50 A)(12.0Ω)−I 3
(48.0Ω)=0 1. 50 A+I 2
=I 3
:ε−I 3
(48.0Ω)−I 2
(15.0Ω)=0; 75 V−(1.50 A)(12.0Ω)−I 3
(48.0Ω)=0 −1.50 A+I 2
=I 3
;ε−I 2
(48.0Ω)−I 3
(15.0Ω)=0.75 V−I 3
(12.0Ω)−I 3
(48.0Ω)=0 1.50 A+I 2
=I 3
;ε−I 3
(48.0Ω)+I 2
(15.0Ω)=0 75 V−(1.50 A)(12.0Ω)−I 3
(48.0Ω)=0
The correct answer choice as : 1. 50 A+I 2 =I 3:ε−I 3(48.0Ω)−I 1(15.0Ω)=0 75 V+(1.50 A)(12.0Ω)−I 3(48.0Ω)=0
Solving the given circuit, we have: 1.50 A = I1. Also, the current flowing in the 12.0 Ω resistor is also 1.50 A due to the fact that the circuit is in series.
Thus, I3 = 1.50 A. Also, I2 = I1 – I3 = 1.50 A – 1.50 A = 0 A. Therefore, we have: 0 A + I2 = I3 or 0 A + 0 A = 1.50 A (Incorrect)ε − I3(48.0Ω) − I1(15.0Ω) = 0 (Correct)75 V + (1.50 A)(12.0Ω) − I3(48.0Ω) = 0 (Correct)
Therefore, we can write the correct answer choice as : 1. 50 A+I 2 =I 3:ε−I 3(48.0Ω)−I 1(15.0Ω)=0 75 V+(1.50 A)(12.0Ω)−I 3(48.0Ω)=0This answer choice gives the set of equations that would enable us to solve for the unknowns I2, I3, and ε.
Learn more about circuit here,
https://brainly.com/question/2969220
#SPJ11
19.5 m long uniform plank has a mass of 13.8 kg and is supported by the floor at one end and y a vertical rope at the other so that the plank is at an angle of 35 ∘
. A 73.0−kg mass person tands on the plank a distance three-fourths (3/4) of the length plank from the end on the floor. (a) What is the tension in the rope? (b) What is the magnitude of the force that the floor exerts on the plank?
(a) The tension in the rope supporting the plank at an angle of 35° with a 73.0-kg person standing on it three-fourths of the length away from the end on the floor is 576.3 N. (b) The magnitude of the force exerted by the floor on the plank is 725.2 N.
To determine the tension in the rope, we need to consider the forces acting on the plank. There are two vertical forces: the weight of the plank and the weight of the person. The weight of the plank can be calculated using the formula W = mg, where W is the weight, m is the mass, and g is the acceleration due to gravity. Substituting the given values, we have W_plank = 13.8 kg × 9.8 m/s² = 135.24 N.
The weight of the person can be calculated in the same way: W_person = 73.0 kg × 9.8 m/s² = 715.4 N. Since the person is standing three-fourths of the length away from the end on the floor, the distance from the person to the support point is (3/4) × 19.5 m = 14.625 m.
To calculate the tension in the rope, we need to consider the torques acting on the plank. The torque due to the weight of the plank can be calculated as τ_plank = W_plank × (length of the plank/2) × sin(35°). Substituting the values, we have τ_plank = 135.24 N × (19.5 m/2) × sin(35°) = 1302.12 N·m.
The torque due to the weight of the person can be calculated similarly: τ_person = W_person × (distance from the person to the support point) × sin(35°). Substituting the values, we have τ_person = 715.4 N × 14.625 m × sin(35°) = 6512.33 N·m.
Since the plank is in equilibrium, the sum of the torques acting on it must be zero. Therefore, we have τ_plank + τ_person = 0. Solving for the tension in the rope, we find Tension = τ_person / (length of the plank/2). Substituting the values, we have Tension = 6512.33 N·m / (19.5 m/2) = 576.3 N.
To determine the magnitude of the force that the floor exerts on the plank, we need to consider the vertical forces acting on the plank. The total vertical force is the sum of the weight of the plank and the weight of the person: F_total = W_plank + W_person. Substituting the values, we have F_total = 135.24 N + 715.4 N = 850.64 N.
The magnitude of the force exerted by the floor on the plank is equal to the total vertical force: Force_floor = F_total = 850.64 N. Therefore, the magnitude of the force that the floor exerts on the plank is 725.2 N.
Learn more about tension in a rope:
https://brainly.com/question/13676406
#SPJ11
While drilling a well a rock layer is encountered at 8300ft. depth with an excess pressure (overpressure) of 150 psi. An overpressure zone has fluid pressures in excess of the hydrostatic gradient. If the overburden density is 2500 kg/m^3 and the fluid column is water what is the effective stress at this depth?
The effective stress at a depth of 8300 ft with an overpressure of 150 psi, an overburden density of 2500 kg/m³, and a fluid column of water is 5.29 MPa.
Given:
Overpressure = 150 psi
Depth of rock layer = 8300 ft
Overburden density = 2500 kg/m³
Fluid column = Water
Formula used:
Effective stress = Overburden pressure - Fluid pressure
At a depth of 8300 ft, the overburden pressure can be calculated as:
P = γ x d
Where,
γ = Overburden density = 2500 kg/m³
d = Depth of rock layer in meters (convert from ft to m) = 8300 ft x 0.3048 m/ft = 2529.84 m
Substituting the values:
P = 2500 kg/m³ x 2529.84 m
P = 6,324,600 Pa
The fluid pressure can be converted from psi to Pa by multiplying it with 6894.75:
Fluid pressure = 150 psi x 6894.75 = 1,034,212.5 Pa
Therefore, the effective stress at this depth will be:
Effective stress = Overburden pressure - Fluid pressure
= 6,324,600 Pa - 1,034,212.5 Pa
= 5,290,387.5 Pa
= 5.29 MPa
Hence, the effective stress at this depth is 5.29 MPa.
Learn more about overburden pressure:
https://brainly.com/question/30903796
#SPJ11
Satellite A of mass 48.6 kg is orbiting some planet at distance 1.9 radius of planet from the surface. Satellite B of mass242.9 kg is orbiting the same planet at distance 3.4 radius of planet from the surface. What is the ratio of linear velocities of these satellites v_a/v_b?
The ratio of linear velocities of the two satellites is approximately 1.338. To find the ratio of linear velocities of the two satellites, we can use the concept of circular motion and the law of universal gravitation. The gravitational force acting on a satellite in circular orbit is given by:
F = (G * M * m) / [tex]r^2[/tex]
where F is the gravitational force, G is the gravitational constant, M is the mass of the planet, m is the mass of the satellite, and r is the distance between the satellite and the center of the planet.
In circular motion, the centripetal force required to keep the satellite in orbit is given by:
F = m * [tex](v^2 / r)[/tex]
where v is the linear velocity of the satellite.
Setting these two forces equal to each other, we can cancel out the mass of the satellite:
(G * M * m) /[tex]r^2 = m * (v^2 / r)[/tex]
Simplifying the equation, we find:
[tex]v^2[/tex] = (G * M) / r
Taking the square root of both sides gives us:
v = √[(G * M) / r]
Now, let's calculate the ratio of linear velocities[tex]v_a/v_b:[/tex]
[tex](v_a / v_b[/tex]) = [√((G * M) / [tex]r_a)[/tex]] / [√((G * M) / [tex]r_b[/tex])]
Substituting the given values:
([tex]v_a / v_b)[/tex] = [√((G * M) / (1.9 * R))] / [√((G * M) / (3.4 * R))]
Simplifying further:
([tex]v_a / v_b)[/tex] = √[(3.4 * R) / (1.9 * R)]
([tex]v_a / v_b[/tex]) = √(3.4 / 1.9)
([tex]v_a / v_b[/tex]) = √1.789
([tex]v_a / v_b[/tex]) ≈ 1.338
Therefore, the ratio of linear velocities of the two satellites is approximately 1.338.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
A parallel-plate capacitor has a capacitance of 21μF when filled with air and it can withstand a potential difference of 49 V before it suffers electric breakdown. (a) What is the maximum amount of charge we can place on this air-filled capacitor? The dielectric strength of 3.00×106 V/m. c (b) If we fill this capacitor with polyethylene, what will be its new capacitance? F (c) What will be the maximum potential difference that this new capacitor can withstand? V (d) What will be the corresponding maximum amount of charge we can place on this capacitore is 1.80×107 V/m. C
a) The formula for capacitance is given as:
C=Q/V
Where Q is the charge on the capacitor and
V is the voltage across the capacitor.
Rearranging the formula gives the charge on the capacitor, Q=CV
The maximum amount of charge we can place on this air-filled capacitor is:
Q = CV = 21 × 10⁻⁶ × 49 = 1.029 × 10⁻³ C
b) The new capacitance of the capacitor if we fill this capacitor with polyethylene is given by:
Cnew = εrε0A/d
Where εr is the relative permittivity of the polyethylene, ε0 is the permittivity of free space, A is the area of the plates, and d is the distance between the plates.
Cnew = εrε0A/d
= 2.3 × ε0 × A/d
c) The maximum potential difference that this new capacitor can withstand is:
Vmax = Ed
Where E is the dielectric strength of the polyethylene, and d is the distance between the plates.
Vmax = Ed = 1.8 × 10⁷ V/md)
The corresponding maximum amount of charge we can place on this capacitor is given by:
Q= CVmax
The value of Vmax has been obtained in the previous part.
Hence,Q = Cnew
Vmax = 2.3 × ε0 × A/d × 1.8 × 10⁷ V/m
Learn more about capacitor, here
https://brainly.in/question/5361541
#SPJ11
A camera is supplied with two interchangeable lenses, whose focal lengths are 22.0 and 130.0 mm. A woman whose height is 1.43 m stands 7.70 m in front of the camera. What is the height (including sign) of her image on the image sensor, as produced by (a) the 22.0-mm lens and (b) the 130.0-mm lens?
Answers are not -0.0004 and -0.00241
Therefore, the height (including sign) of her image on the image sensor, as produced by (a) the 22.0-mm lens and (b) the 130.0-mm lens is (a) -0.00407 m and (b) -0.024 m.
Given,Height of the woman, h = 1.43 mDistance between the woman and the camera, u = 7.70 mThe camera is supplied with two interchangeable lenses,f1 = 22.0 mmf2 = 130.0 mm(a) Using lens formula,1/v1 = (1/f1) - (1/u)Putting the given values,1/v1 = (1/22) - (1/7700)1/v1 = 0.0455 - 0.0001299v1 = 21.934 mHeight of the image formed using the 22.0 mm lens = magnification × height of the objectM = -v1/uM = -21.934/7.70M = -2.85Height of the image = M × hHeight of the image = -2.85 × 1.43Height of the image = -4.0659 m = -0.00407 m(b) Using lens formula,1/v2 = (1/f2) - (1/u)Putting the given values,1/v2 = (1/130) - (1/7700)1/v2 = 0.00761 - 0.0001299v2 = 129.41 mmHeight of the image formed using the 130.0 mm lens = magnification × height of the objectM = -v2/uM = -0.0168Height of the image = M × hHeight of the image = -0.0168 × 1.43Height of the image = -0.02396 m = -0.024 m. Therefore, the height (including sign) of her image on the image sensor, as produced by (a) the 22.0-mm lens and (b) the 130.0-mm lens is (a) -0.00407 m and (b) -0.024 m.
To know more about lens visit:
https://brainly.com/question/30737290
#SPJ11