Answer:
The children have spent 5 of there years playing and having the time of there lives and the other 5 years are spent losing and gaining brain sells!
hope this helps:)
so sorry if this is wrong!
A. Airplanes typically fly at an altitude of about 10,000 meters. At this altitude the atmospheric pressure is significantly less than it is at sea-level. Because of this, airplane cabins must be pressurized so that the people on board can continue to get enough oxygen. If a typical 747 has a volume of 28,000 m3 and is filled with air at 101.3 kPa on the ground, what is the new volume of air inside when the cabin is pressurized to 75 kPa once it is in flight? b. Twinkies are made up of 68% air. If you buy a Twinkie in the airport and take it with you on a plane ride, how would its size change during the flight?
Answer:
The new volume of the air inside when the cabin is pressurized to 75 kPa is 37818.[tex]\overline 6[/tex] m³
Explanation:
The given 747 airplane parameters are;
The volume of air in the airplane, V₁ = 28,000 m³
The pressure of the air on the ground, P₁ = 101.3 kPa
The pressure of the air once it is in flight, P₂ = 75 kPa
Let V₂ represent the new volume of the air inside when the cabin is pressurized to 75 kPa
Boyle's Law states that the pressure of a given mass of air is inversely proportional to its volume at constant temperature
Therefore, by Boyle's law, we have;
P ∝ 1/V and P₁·V₁ = P₂·V₂
Which gives;
V₂ = P₁·V₁/P₂
Substituting the known values, we get;
V₂ = 101.3 kPa × 28,000 m³/(75 kPa) = 37818.[tex]\overline 6[/tex] m³
The new volume of the air inside when the cabin is pressurized to 75 kPa = V₂ = 37818.[tex]\overline 6[/tex] m³.
How many moles of oxygen are needed to produce 2 moles of Tetraphosphorus decaoxide (P4O10) in the reaction?
P4(s) + 5O2(g) →P4O10(s)
a. 1 mole
b. 0.2 moles
c. 10 moles
d. 5 moles
Answer:
C
Explanation:
5 moles of oxygen are needed to produce 1 mols of P4O10
x moles of oxygen are needed to produce 2 mols of P4O10
5/x = 1/2 Cross multiply
1*x = 2 * 5 Combine
x = 10
C
Give the symbol for the element with the following orbital diagram:
↑↓
1s
0000
↑↓
2s
0000
↑↓
↑↓
2p
↑↓
0000
↑↓
3s
0000
↑↓
↑↓
3p
↑↓
0000
↑↓
4s
0000
↑↓
↑↓
↑↓
3d
↑↓
↑
The given orbital diagram are iron and symbol for the element is Fe
Orbital diagrams are a pictorial description of electrons in an atom and where electron go in atom then we have to follow three rules, and the first one being the Auf bau Principle, the Auf bau Principle states that each electron occupies the lowest energy orbital first filled and the second is pauli exclusion principle in which only two electron are present which is in opposite spin and third is hunds rule of maximum multiplicity in which pairing of electron is not possible until orbital are singly occupied this rules are used for filling the electron here given orbital diagram in which 1s²2s²2p⁶3s²3p⁶4s²3d⁶ means the element is iron and symbol of this element is Fe
Know more about orbital diagram
https://brainly.com/question/20672248
#SPJ1
In an electrically neutral atom of any element, there are equal numbers of
A. Protons and neurons.
B. electrons and procons.
C. electrons and neurrons.
D. atomic number and atomia mess. 5
Answer:
B. electrons and protons.
Explanation:
In an electrically neutral atom of any element, there are equal number of protons and electrons in the atom.
Protons are the positively charged particles in an atom.
Electrons are the negatively charged particles within the atom.
When the number of protons and electrons are the same or equal, the atom is neutral.
But when there is an imbalance, an ion results.
If two types of matter are combined and energy is given off, what type of change is likely to have occurred?
Answer:
Chemical change
Explanation:
If two types of matter reacts or are combined and energy is given off, the type of change that might have occurred is a chemical change.
A chemical change is one in which a new kind of matter is formed.
It is always accompanied by energy changes.
The process is not easily reversible.
When an exothermic reaction or change occurs, heat is released and it is a typical characteristic of chemical change.In the compound Al2O3, aluminum has an oxidation number of 3, while oxygen's oxidation number is ________.
Answer:
The oxidation number of Oxygen is -2.
Answer:
-2
Explanation:
I just had that question!
A solution with a molarity of 0.1850 contains 19.30 grams of BaCl2. What is the volume of the solution
Answer:
Volume in L = 0.50 L
Explanation:
Given data:
Molarity of solution = 0.1850 M
Mass of BaCl₂ = 19.30 g
Volume of solution = ?
Solution:
First of all we will calculate the number of moles of solute:
Number of moles = mass/molar mass
Molar mass of BaCl₂ = 208.23 g/mol
Number of moles = 19.30 g / 208.23 g/mol
Number of moles = 0.093 mol
Volume of solution:
Molarity = number of moles of solute / volume of solution in L
0.1850 M = 0.093 mol / Volume in L
Volume in L = 0.093 mol / 0.1850 M (M= mol/L)
Volume in L = 0.50 L
How does the number of molecules in 1 mol of oxygen compare with the number of molecules in 1 mol of nitrogen?
1 mol of oxygen has fewer molecules.
1 mol of oxygen has more molecules.
Each sample has the same number of molecules.
The molecules cannot be compared without knowing the mass.
Answer:
Each sample has the same number of molecules.
Explanation:
Just took the quiz on edge 2021
Taking into account the definition of Avogadro's number, each sample has the same number of molecules.
Avogadro's NumberAvogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole.
Avogadro's number applies to any substance.
This caseAvogadro's number applies to any substance. This means that the number of molecules in 1 mol of oxygen is equal to the number of molecules in 1 mol of nitrogen.
Finally, the correct answer is the third option: each sample has the same number of molecules.
Learn more about Avogadro's Number:
brainly.com/question/1445383
brainly.com/question/1528951
How does heat gases cause increase in pressure?
A. Molecules increase in pressure as heat is applied.
B. Heat energy cause less molecule to collide with each other increasing pressure.
C. As molecules move more due to increase in heat, they bump into each other more create pressure.
D. Molecules move less in heated gas producing more pressure.
Answer:
Explanation:
A is the correct answer.
If you found my answer useful then please mark me brainliest
Answer:
I put this so the guy up top can have brainliest
Explanation:
your welcome
What is electrical energy?
O A. Energy stored in a molecule
B. Energy released by a temperature change
O c. The movement of electrons
O D. The sound from an explosion
Why does your heart rate increase while exercising?
Answer:
During exercise, your body may need three or four times your normal cardiac output, because your muscles need more oxygen when you exert yourself. During exercise, your heart typically beats faster so that more blood gets out to your body.
Answer:
I'd myself say it's because a lot of people are fat but here's the real answer ;)
During exercise, your body may need three or four times your normal cardiac output, because your muscles need more oxygen when you exert yourself. During exercise, your heart typically beats faster so that more blood gets out to your body.
help me please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
How can the conductivity of a salt solution be decreased?
A. Add more salt to increase the concentration.
B. Add more water to decrease the concentration.
C. Add more water to increase the concentration.
D. Add more salt to decrease the concentration.
Answer:
B. Add more water to decrease the concentration.
Explanation:
If we add more water to the solution, the concentration is decreased and like wise the conductivity of the solution.
Concentration is the amount of solute in a solution. Conductivity deals with the ability of a solution to allow the passage of current.Concentration and conductivity are directly proportional to one another. The higher the concentration, the higher the conductivity and vice versa.
Adding more water increases the amount of solvent and the concentration reduces.What type of energy is described as electrons moving in a circuit?
Answer:
Electrical energy (form of kinetic energy)
Explanation:
Particles of a liquid
A. Are free to move in a container but remain in close contact with one another
B. Are tightly packed together and stay in a fixed position
C. Have no viscosity
D. Decrease in volume with increasing temperature
Answer:
A
Explanation:
B. That's a solid
C. Liquid is the only thing that can have viscosity
D. Not necessarily the case
The total mass of an atom expressed in atomic mass units is known as the *
mass number.
atomic number.
isotopic number.
covalent number.
Answer:
c
Explanation:
When coal is burned, carbon atoms are moved from the geosphere to the atmosphere. Each atom of carbon in the coal combines with two atoms of oxygen to produce carbon dioxide (CO2). Carbon dioxide has an atomic weight of 44, which is approximately 3.667 times heavier than a carbon atom of atomic weight 12.
It takes about 4750 pounds of coal to power a house for one year. If anthracite coal is used, how many pounds of carbon will this be?
Answer:
5*10^25 atoms of carbon
Explanation:
Sulphur is found in many forms in the nature. S2, S6 and Ss being some of them. What can we say
will certainly be common among these forms of sulphur?
(A) They will exhibit same physical properties
(B) They will exhibit same chemical properties
(C) Sulphur atoms in each will be identical
(D) All of the above
Answer:
What can be said about these common forms of sulphur is that;
(B) They will exhibit same chemical properties
Explanation:
Allotropy is the property of an element to exist in two or more forms in the same physical state
Allotropes have several similar chemical properties but differ in their physical properties, such as the white, pale yellow to totally colorless diamond and the gray graphite
Sulphur can exist in several allotropic forms, and carbon is the only element that has more allotropes than sulphur
The sulphur allotropes includes S₂, S₆, and S₅ have similar chemical properties but different physical properties.
The correct option is;
What can be said about these common forms of sulphur is that they have the same chemical properties
how can balancing equations support the law of conservation
Answer:
detail is given below.
Explanation:
This law was given by French chemist Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.
Law of conservation of mass:
According to the law of conservation mass, mass can neither be created nor destroyed in a chemical equation.
For example:
In given photosynthesis reaction:
6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂
The given equation is balanced chemical equation of photosynthesis. There are six carbon atoms, eighteen oxygen atoms and twelve hydrogen atoms on the both side of equation so this reaction followed the law of conservation of mass.
If equation is not balanced,
CO₂ + H₂O → C₆H₁₂O₆ + O₂
It can not follow the law of conservation of mass because mass is not equal on both side of equation.
When an object is at rest ,we say forces are?
Answer:
If an object is at rest, then there are no forces acting on the object. It would take an unbalanced force to keep an object in motion at a constant velocity. It is the natural tendency of all objects to eventually come to a rest position.
Explanation:
Calculate the molar mass of NaNO3-
(a)A can of soda contains 12.0 fl oz. What is the volume in liters (given
that 1 L =
1000 mL)?
Answer:
0.355L
Explanation:
1fl oz (Fluid ounce) is an unit of volume widely used in United States of America. 1fl oz is equivalent to 29.5735mL.
12.0 fl oz are:
12.0fl oz * (29.5735mL / 1fl oz) = 354.9mL
There are 354.9mL in 12.0 fl oz.
As 1L = 1000mL, in 354.9mL you have:
354.9mL * (1L / 1000mL =
0.355LWhat happened when you placed your bottle system
in cold water?
Answer:
The water level in the pipe went down.] ... [The hot water in the cup heated up the water particles inside the bottle. They began to move more. Greater motion (kinetic energy) pushed the particles farther apart, resulting in expansion.
how many molecules are in 18moles of CH.
Answer:
1.08 x 10²⁵molecules
Explanation:
From the mole concept we know that ;
1 mole of any substance contains 6.02 x 10²³ molecules
This number is the Avogadro's number.
So;
18 mole of CH will contain:
Number of molecules of CH = 18 x 6.02 x 10²³ = 1.08 x 10²⁵molecules
The number of molecules is therefore 1.08 x 10²⁵molecules
A 1.0 kg ball is thrown into the air and initial velocity of 30 mi./s how high into the air did the ball travel
Answer:
45.9m
Explanation:
Given parameters:
Mass of the ball = 1kg
Initial velocity = 30m/s
Unknown:
Height the ball will travel = ?
Solution:
At the maximum height, the final velocity of the ball will be 0;
Using ;
V² = U² - 2gh
V is the final velocity
U is the initial velocity
g is the acceleration due to gravity
h is the height
0² = 30² - (2 x 9.8 x h)
0 = 900 - 19.6h
h = 45.9m
Displacement reaction between copper and silver nitrate solution produces silver and copper (II) nitrate solution. Write the chemical equation
Answer:
Cu + 2AgNO₃ → 2Ag + Cu(NO₃)₂
Explanation:
We are to give the reaction expression for this displacement reaction.
Reactants = copper and silver nitrate solution
Products = silver and copper (II) nitrate
Copper = Cu
Silver nitrate solution = AgNO₃
Silver = Ag
copper (II) nitrate = Cu(NO₃) ₂
So:
Cu + 2AgNO₃ → 2Ag + Cu(NO₃)₂
A 15.33 g sample of magnesium oxide is found to contain 12.67 g of magnesium. What is the percent (by mass) composition of
the magnesium in the compound?
026 Ma
Answer:
Explanation:
I can help
Answer:
12.67g of Mg / 15.33g of MgO * 100% = 82.6% of Mg
Explanation:
What is the definition of momentum?
A- The amount of matter in an object.
B-Mass in motion.
C-Speed with direction.
D- The resistance to change motion
Answer:
B. Mass in motion. Is the definition of momentum
which of the following is not a way to measure a race car motion
a) it’s deceleration
b) it’s velocity
c) the car’s resistance
d) the car’s displacement
The following that is not a way to measure a race car's motion is its velocity. The correct option is b.
What is motion?
Motion is a phenomenon that changes the position of an object with respect to time. The motion needs a force to change the position, and motion needs some energy that can be potential energy or a force.
Velocity is the speed of any object that is in motion in a particular direction. It tells the rate of change of motion of an object. It is a scalar quantity.
Motion is the result of force. Force can be measured by multiplying the mass by acceleration. So the variables that would be needed to calculate a race car's motion will be acceleration and the mass of the car, and the resistances.
Thus, the correct option is b. it’s velocity.
To learn more about motion, refer to the link:
https://brainly.com/question/3421105
#SPJ2
39 Which statement is NOT a part of the scientific theory of cells?
A Cells are the basic unit of life.
B All cells come from other cells.
C All organisms are made of cells.
D Cells make up nonliving objects.
Answer: D
Explanation: cells are alive
Answer:
D
Explanation:
Cells are the most basic unit of life.