sound components are identified as coming from the same sound source. this means that the components are

The temperature rise of the iron is 13.33°C

Calorimetry is the science of measuring the heat absorbed or evolved during the course of a chemical reaction or change of state.

The heat gained or released during a calorimetry procedure can be calculated as follows:

Q = mc∆T

Where;

According to this question, a 5kg block of iron with a specific heat capacity of 450 J/kg °C recieves 0.03 MJ of energy. The change in temperature can be calculated as follows:

30,000J = 5 × 450 × ∆T

30000 = 2250∆T

∆T = 30000 ÷ 2250

∆T = 13.33°C

Therefore, 13.33°C is the temperature rise.

Learn more about temperature at: https://brainly.com/question/28992424

#SPJ1

It is a 2:1 ratio of ey, final, the maximum value of the y-component of the electric field immediately following the last polarizer, to eo, the amplitude of the electric field oscillations in the incident polarized beam.

What is a ratio?

A ratio is the divisional comparison of two numbers.

We may find the ratio by dividing the second output by the first output, which corresponds to the first two outputs, or -1/8 and -1/4:

-1/4-1/8

We multiply by the reciprocal when dividing fractions:

-1/4x-8/1

When multiplying fractions, multiply across the board:

(-1x-8)/(4x1) 8/4=2

A ratio is a comparison of two or more numbers in mathematics that shows how big one is in comparison to the other. A ratio divides two amounts into equal parts, with the dividend or antecedent serving as the unit of comparison and the divisor or unit of comparison serving as the unit of comparison.

To know more about electric field, visit:

https://brainly.com/question/15800304

#SPJ1

The width of the slit would be approximately 690 nm. The width of a slit refers to the size of the opening in the barrier that is used to produce the slit.

The width of a single slit that produces its first minimum at 60 degrees for 600-nm light can be calculated using the formula for the width of a single slit, which is:

w = λ / (sin θ)

where w is the width of the slit, λ is the wavelength of the light, and θ is the angle at which the first minimum occurs. Plugging in the values for λ and θ, we get:

w = 600 nm / (sin 60°)

= 600 nm / (0.866)

= 690 nm

So the width of the slit would be approximately 690 nm.

It's important to note that this is just an approximate value, as the exact width of the slit will depend on the precise conditions of the experiment, such as the distance between the slit and the screen, the size and shape of the slit, and other factors.

To learn more about wavelength refer :

https://brainly.com/question/27120701

#SPJ4

Each compound name with chemical formula:

Silicon tetrafluoride - SiF₄

Potassium sulfite - K₂SO₃

Diphosphorous trisulfide - P₂S₃

Siver(II) fluoride - AgF₂

Magnesium perchlorate - Mg(ClO₄)₂

A compound's constituent elements and their relative proportions are listed in a chemical formula. No subscript is used when there is only one atom of a particular type. A subscript is added to the symbol for the atom when there are two or more of a particular type of atom present.

A chemical formula lists the constituent elements of a compound along with how many atoms of each are present in the compound's smallest unit, whether it be a molecule or a formula unit. We can name simple compounds given their chemical formulas by using the names of the elements and a few simple rules.

To know more about chemical formula visit:

https://brainly.com/question/29031056

#SPJ1

The initial vertical velocity of the object is 2.5 m/s .

Initial Velocity, denoted as u, is the velocity at time period t = 0. It is the speed at which motion first occurs. There are four equations for starting velocity: (1) The starting velocity is expressed as u = v - at if time, acceleration, and final velocity are given.

Keep in mind that the INITIAL VERTICAL VELOCITY of the projectile is equal to ZERO because it is launched horizontally.

Given,

base  =1m

height = 2.5

vertical velocity =2.5/1

The initial vertical velocity of the object is 2.5 m/s .

A projectile's initial velocity has both a horizontal component and a vertical component if it is thrown at an angle to the horizontal. The projectile's displacement horizontally as a result of velocity is shown by the horizontal velocity component (vx).

To learn more about intial velocity refer to :

https://brainly.com/question/24493758

#SPJ1

0.08 gram mass of magnesium oxide will be formed.

Mass is an intrinsic property in the mass of a body. It was the  traditionally believed to the  be related to the quantity of matters in the  physical body, until it is  discovery of the atom and  particle in physics.

Mass is quantitative measure of inertia a fundamental quantity of all matters.

2Mg + O 2→2MgO

Molar mass of Mg =24 g

Molar mass of MgO =40 g

No. of moles of O2=6.022×10^20/6.022×10^23

=0.001 mole of O2

No. of moles of Mg=0.486/24

=0.02 moles  of Mg

As moles of O 2

​ are less than 0.01, O 2

 is limiting reagent and it is  0.002 moles of MgO is formed.

⇒0.002×40=0.08 g of MgO

To know more about mass click-

https://brainly.com/question/19385703

#SPJ1

Answer:

Exploding white dwarfs

Explanation:

The galactic distances used to measure the acceleration of the universe are determined by observations of exploding white dwarfs. Some observations has shown the evidence that the universe is accelerating. This accelerating expansion result from observations of the brightness of distant supernovae.

Answer:

trigonometric parallax.

Explanation:

Answer:

[tex] \huge{\boxed{68,738.99 \: J}} [/tex]

Explanation:

The kinetic energy of the car can be found by using the formula

[tex] \bold{k = \frac{1}{2} \times m \times {v}^{2} \\ }[/tex]

m is the mass in kg

v is the velocity in m/s

From the question

m = 1854.5 kg

v = 8.61 m/s

[tex]k = \frac{1}{2} \times 1854.5 \times {8.61}^{2} \\ k = 927.25 \times 74.1321 \\ \\ k = 68738.989[/tex]

We have the final answer as

Answer:

-Making the surfaces rough.

-By pressing the surfaces harder against each other (by increasing normal force).

-By removing the lubrication between the surfaces in contact.

-By using sliding motion rather than rolling motion.

-By increasing the surface area in contact.

Explanation:

This water wave passes past while a floating leaf cycles down and up three times in a second. The wave's velocity will be 2 hertz.

Use this illustration The amount of waves that travel through a fixed location in a specific amount of time is known as frequency. The duration of a wave passing is therefore half a second. If so, the rate is 2 Hertz per second. Four Hertz is the frequency if 240 waves per hour are sent.

One cycle per second, or hertz, is the SI unit for frequency (Hz). Cycles per second are represented as a hertz.

To know more about 2 hertz visit:
https://brainly.com/question/534403

#SPJ4

The velocity of the motorcycle with respect to the passenger in the car is determined as 20 mi/hr.

The velocity of the motorcycle is determined by applying the principle of relative velocity.

The relative velocity is defined as the velocity of an object with respect to another observer.

A frame of reference is defined as the reference point or chosen base point in which a measurement is taken.

The relative velocity of the motorcycle is calculated by choosing an observer in the car as the frame of reference.

Mathematically, this formula is given as;

Vr = Vm - Vc

where;

Vr = 80 mi/hr  -  60 mi/hr

Vr = 20 mi/hr

Thus, the relative speed of the motorcycle is a function of the speed of the car and the speed of the motorcycle.

Learn more about relative velocity here: https://brainly.com/question/17228388

#SPJ1

Answer:hope this helps

pleasee i need the brainliest

Explanation: Warm air rises and is replaced by cooler air from the surrounding area. The warm air eventually cools off, falling down and replacing more warm air. This causes a constant upward flow sometimes called a thermal that allows large birds to soar without effort.

The angular speed increase by a factor of 2 i.e. option (a). 2 is correct

The rate of change of angular displacement is referred to as angular speed. Radian per second is used to measure angular speed. Both angular velocity and angular speed are represented using the same formula.

Utilizing the angular momentum conservation law,

Li = Lf

Thus ,Li is the initial angular momentum and Lf the final angular momentum are, respectively.

L = IW, where I is the inertia momentum and W is the angular velocity, can also be used to determine angular momentum.

so, [tex]IiWi = IfWf[/tex]

[tex]L_{f} =\frac{1}{2} L_{i}[/tex]

According to the given condition, then from above two equation,

[tex]L_{i}W_{f} = \frac{1}{2}L_{i}W_{f}[/tex]

[tex]2W_{i} = W_{f}[/tex]

Thus the angular speed of the skater is factor of 2.

To know more about angular speed

https://brainly.com/question/21041076

#SPJ4

The ball should be tossed with speed 10 m/s in order for it to take 2 second to return to the level from which it was tossed.

The Time of flight of projectile motion is defined as the total time taken during ascent and fall to the ground.

Here, time of flight is given 2 seconds. So, Time of ascent is 1 second. Time of ascent is time taken to reach the highest height.

We have to apply the formula

v= u +at

At the maximum height, v =0 m/s.

0 = u - 10×1

So, u = 10 m/s

So, our answer depends on the value of g. If we take the value of g as 9.8, then speed required will be 9.8 m/s

To know more about projectile motion here

brainly.com/question/11049671

#SPJ4

The given statement that 'The total magnification achieved using a 10x objective lens with a 10x eyepiece lens is 20x' is false.

A stereomicroscope is a good option for viewing large and opaque specimens.

The magnification of eyepiece is either 10x or 15x.

The magnification of objective lens can be 10x, 40x or 100x.

The total magnification is nothing but the multiplication of the magnification of eyepiece and the magnification of objective lens.

Given that, magnification of objective lens is 10x

Magnification of eyepiece lens is 10x

So, the total magnification is,

⇒ 10x × 10x = 100x

But the total magnification is given as 20x.

Thus, the given statement is false.

To know more about magnification:

https://brainly.com/question/28507107

#SPJ4

The gravitational force of attraction between two objects is 2.964 x 10⁻9 N. So, the correct option is D.

Gravitational force is defined as the force of attraction experienced by a body due to the gravity of earth.

Here,

Mass of each body,

m₁ = m₂ = 5 kg

Distance between the masses, r = 0.75 m

The equation for gravitational force is given by,

F = Gm₁m₂/r²

where G is the gravitational constant.

Therefore,

F = (6.67 x 10⁻¹¹x 5 x 5)/(0.75)²

F = 166.75 x 10⁻¹¹/0.5625

F = 2.964 x 10⁻9 N

Hence,

The gravitational force of attraction between two objects is 2.964 x 10⁻9 N.

To learn more about gravitational force, click:

https://brainly.com/question/24783651

#SPJ2

The reflected pulse will be equal to or less than incident pulse when wave pulse on a string reflects from a boundary.

To learn more about momentum -

https://brainly.com/question/904448

#SPJ4

As shoes are worn down, there is a decrease in the coefficient of friction, that increases the risk of injury from a slip and fall for the one wearing it

Wearing off shoes decreases the coefficient of friction that increases the risk of slip.

Rubber-soled shoes on a concrete surface can generate a coefficient of friction over 1.0µ. Generally, a coefficient of friction of 0.4µ to 0.5µ is considered a good traction offering.

One of the easiest and do-it-yourself ways to make shoes slip-resistant is to scuff the soles with sandpaper, a nail file, or with any rough surface, such as brick, gravel or rock. You have to simply rub the rough item on the sole of your shoe until small grooves appear.

To know more about coefficient of friction, refer

https://brainly.com/question/14121363

#SPJ1

acceleration during the constant speed is the  friction acceleration which is 3 ms^-2.

Accelaration is the eate of the change of the velocity of an object with respect by time.

Accelaration (a) id the reason that change in velocity over to the change in time.

Represented by the equation to a= ∆v/∆t. This is allowa you to measure how fast velocity by the changes in meters per second squars (m/s^2).

Here mass is 14 KG box

Here friction force applied by the  because of rough place so that it stopped in 2 seconds

So acceleration by friction is negative sense and 6/2 or 3 ms^-2

So static frictional force is = 14×3 or 54 which is greater  than the  applied force

So the acceleration during the constant speed is the  friction acceleration which is 3 ms^-2.

To know more about accelaration click-

https://brainly.com/question/460763

#SPJ1

There are several reasons why the actual force of friction for an object at rest may be less than the calculated force of friction. One possible reason is that the object may be on a surface that is not completely smooth, and the roughness of the surface may reduce the amount of friction between the object and the surface. Another reason is that the object may be moving slightly even when it is at rest due to factors such as air currents or vibrations, which can also reduce the amount of friction. Finally, the force of friction is also affected by the materials that the object and the surface are made of and the temperature and humidity of the environment. All of these factors can affect the actual amount of friction that is present and may cause it to be less than the calculated force of friction.

The speed of water in the constriction is faster when compared to the rest of the pipe.

The venturi effect consists of a physical phenomenon applied in fluid dynamics in which the pressure of flow decreases when there is a constraint in the conduct, accompanied by an increase in velocity of the fluid due to a decrease in cross-sectional area of the conduct.

The constriction is said to have a lower radius when compared to the rest of the pipe.

Applying the equation of continuity, A₁ v₁ = A₂ v₂

where, A is the area

v is the velocity

It is said from the above equation that, if area decreases velocity increases and if area increases velocity decreases, as velocity and area are inversely proportional to each other.

To know more about constriction:

https://brainly.com/question/17191659

#SPJ4

The propagation speed of the waves is v = 1.1009 m/s

Waves' progression and transformation through space and time. The article will examine several definitions in addition to the usual one for wave propagation.

There are numerous crests and troughs that sound waves travel over. II Sound waves need a physical medium to travel through. III The movement of particles is thought to be responsible for the propagation of sound waves.

Transverse waves include electromagnetic waves like X-rays, radio waves, and visible light. Electric and magnetic fields moving in a perpendicular direction make up these waves. The best examples of longitudinal waves, which vibrate parallel to the direction of the wave, are sound waves.

The formula is

v = fλ

given distance is 5.45 m

and the number of times the bridge is shaken is 3 times

this implies

v = 3 / 5.45 × 2

v = 1.1009 m/s

To know more about wave propagation you may visit the link:

https://brainly.com/question/20725306

#SPJ4

Answer:

[tex] \huge{\boxed{3675 \: N}} [/tex]

Explanation:

The force acting on the tow truck can be found by using the formula

[tex] \bold{F = mass × acceleration} [/tex]

From the question

mass = 1225 kg

acceleration= 3 m/s²

F = 1225 × 3 = 3675

We have the final answer as

According to sect 110.12 (A) in the NEC, unused knockouts and other openings in electrical boxes and cabinets are required to be closed.

What do you understand by national electrical code?

A United States standard for the secure installation of electrical wiring and equipment is the National Electrical Code (NEC), also known as NFPA 70. It is a component of the National Fire Protection Association's National Fire Codes series (NFPA). While the NEC does not represents a U.S. law, NEC use is typically mandated by state or municipal legislation, as well as in many jurisdictions outside of the United States. The NEC standardizes and codifies the specifications for secure electrical installations. The "authority having jurisdiction" checks to see if these minimum requirements have been met.

To know more about national electrical code, check out https://brainly.com/question/17215290

#SPJ1

Answer:

Heat Loss = Heat Gain

(60 - T) K1 M1 = (T - 10) K2 M2

M1 = metal        M2 = liquid

K1 = metal         K2 = liquid

(60 - T) K1 * 1 = (T - 60) K2 * 5

60 K1 - T K1 = 5 T K2 - 300 K2

T (5 K2 + K1) = 300 K2 + 60 K1

T = (300 K2 + 60 K1) / (5 K2 + K1)

Need to find largest T

(probably ethanol and iron - you will need to check)

The velocity of the object would be 100m/s.

The pace is the directional velocity of an object in movement as an indication of its price of the trade-in role as determined from a specific body of reference and as measured through a selected fashionable of the time.

Speed defines the path of the movement of the body or the object. speed is mainly a scalar quantity. speed is basically a vector amount. it is the rate of alternate distance. it's miles the charge of trade of displacement.

The consistent pace is the rate at which an object travels equal displacements in equal instances. Variable pace it's far the velocity at which an object cuts one-of-a-kind displacements at different instances.

Learn more about velocities here:-https://brainly.com/question/80295

#SPJ4

A diamond bends light as it passes through it. The refraction is 2.4 if the incidence angles is 30° and the incident ray is 12°.

When light waves cross the border between two materials with different densities, like air and glass, their speed changes. They alter direction as a result, which is referred as as refraction.

That speed with which light will alter as it passes via one media and then enters another. Refraction results as a result of this. The direction of light passage from air into water is altered as a consequence of the shift in medium.

Snell's law states:

n₁sinθ₁ = n₂sinθ₂

n₂ = sinθ₁/ sinθ₂

n₂ = sin(30)/sin(12)

n₂ = 2.4

To know more about refraction visit:

https://brainly.com/question/2660868

#SPJ4

The observed frequency will be greater than the source’s frequency (option - A) is correct answer.

If the source and observer are moving simultaneously in either case—moving observer or moving source—you'll notice that the frequency increases. The frequency decreases if they are drifting apart. Whether the source is moving or the observer is moving will affect how much the frequency changes.

Although the waves move at the same speed, the frequency that is observed is affected by any relative movement between the source and the observer. The wavelength changes along with the observed frequency. When an observer and a source are moving in the same direction, the frequency rises and the wavelength falls.

To know more about frequency visit:

brainly.com/question/15489705

#SPJ1

Answer:

As little as 10 percent of the energy at any trophic level is transferred to the next level; the rest is lost largely through metabolic processes as heat.

Explanation:

Answer:

Thermal Expansion and Contraction. THERMAL EXPANSION AND CONTRACTION. Materials expand or contract when subjected to changes in temperature

Explanation: