(t_{\text{half-empty}} = \frac{{50 - 2\sqrt{77}}}{{20 - 2\sqrt{77}}}) (days)
B. The remaining volume after 5 days:
(V(5) = \frac{{(4(20 - 2\sqrt{77}) + 2\sqrt{77})^2}}{4}) (liters)
To solve the initial value problem, we have the differential equation dy/dt - y = 8e^t + 12e^5t with the initial condition y(0) = 10.[\frac{{dy}}{{dt}} - y = 8e^t + 12e^{5t}, \quad y(0) = 10]
To solve this, we use the method of integrating factors.
First, we rewrite the equation in the standard form:
[\frac{{dy}}{{dt}} - y = 8e^t + 12e^{5t}]
Next, we identify the integrating factor, which is the exponential of the integral of the coefficient of y.
In this case, the coefficient of y is −1, so the integrating factor is (e^{-t}).
Now, we multiply the entire equation by the integrating factor:
[e^{-t} \cdot \frac{{dy}}{{dt}} - e^{-t} \cdot y = 8e^t \cdot e^{-t} + 12e^{5t} \cdot e^{-t}]
Simplifying this equation gives:
[\frac{{d}}{{dt}} (e^{-t} \cdot y) = 8 + 12e^{4t}]
Integrating both sides with respect to t gives:
[\int \frac{{d}}{{dt}} (e^{-t} \cdot y) , dt = \int (8 + 12e^{4t}) , dt]
Integrating the left side gives:
[e^{-t} \cdot y = 8t + 3e^{4t} + C]
To find the constant of integration C, we use the initial condition y(0)=10:
[e^{-0} \cdot 10 = 8(0) + 3e^{4(0)} + C]
Solving this equation gives:
[10 = 3 + C]
So, C=7.
Substituting the value of C back into the equation gives:
[e^{-t} \cdot y = 8t + 3e^{4t} + 7]
Finally, solving for y gives:
[y = (8t + 3e^{4t} + 7) \cdot e^t]
Therefore, the solution to the initial value problem is:
[y = (8t + 3e^{4t} + 7) \cdot e^t]
To solve this problem, let's denote the volume of water in the tank at any time (t) as (V(t)) (in liters). We know that the rate of leakage is proportional to the square root of the remaining volume. Mathematically, we can express this relationship as:(\frac{{dV}}{{dt}} = k \sqrt{V})
where (k) is the proportionality constant.
Given that 23 liters leak out during the first day, we can write the initial condition as:
(V(1) = 100 - 23 = 77) liters
To find the value of (k), we can substitute the initial condition into the differential equation:
(\frac{{dV}}{{dt}} = k \sqrt{V})
(\frac{{dV}}{{\sqrt{V}}} = k dt)
Integrating both sides:
(2\sqrt{V} = kt + C)
where (C) is the constant of integration.
Using the initial condition (V(1) = 77), we can find the value of (C) as follows:
(2\sqrt{77} = k(1) + C)
(C = 2\sqrt{77} - k)
Substituting back into the equation:
(2\sqrt{V} = kt + 2\sqrt{77} - k)
Now, let's answer the specific questions:
A. When will the tank be half empty? We want to find the time (t) when the volume (V(t)) is equal to half the initial volume.
(\frac{1}{2} \cdot 100 = 2\sqrt{77} + k \cdot t_{\text{half-empty}})
Simplifying:
(50 - 2\sqrt{77} = k \cdot t_{\text{half-empty}})
Solving for (t_{\text{half-empty}}):
(t_{\text{half-empty}} = \frac{{50 - 2\sqrt{77}}}{{k}})
When will the tank be half empty?
(t_{\text{half-empty}} = \frac{{50 - 2\sqrt{77}}}{{20 - 2\sqrt{77}}}) (days)
B. The remaining volume in the tank after 5 days can be found by substituting (t = 5) into the equation we derived:
(2\sqrt{V} = k \cdot 5 + 2\sqrt{77} - k)
Simplifying:
(2\sqrt{V} = 5k + 2\sqrt{77} - k)
(2\sqrt{V} = 4k + 2\sqrt{77})
Squaring both sides:
(4V = (4k + 2\sqrt{77})^2)
Simplifying:
(V = \frac{{(4k + 2\sqrt{77})^2}}{4})
The value of (k) can be determined from the initial condition:
(2\sqrt{100} = k \cdot 1 + 2\sqrt{77})
(20 = k + 2\sqrt{77})
(k = 20 - 2\sqrt{77})
The remaining volume after 5 days:
(V(5) = \frac{{(4(20 - 2\sqrt{77}) + 2\sqrt{77})^2}}{4}) (liters)
Learn more about initial value problem:
https://brainly.com/question/30883066
#SPJ11
Use MATLAB program to solve the following problems. The perimeter of a circle is 2*T*r. Find the perimeter of circles with radiuses as a row vector containing 15 values, evenly spaced between 6 feet and 20 feet. The surface area of a cylinder is 2*T*r*h+2*T*r2. Define r as 3 and has an evenly spaced vector of values from 1 to 20 with increments of 1. Find the surface area of the cylinders.
Using MATLAB, the program calculates the perimeters of circles with radii evenly spaced between 6 feet and 20 feet, and the surface areas of cylinders with radii ranging from 1 to 20 and height 3.
To solve the first problem, we can use MATLAB to define the radius vector and calculate the perimeters of the circles using the formula 2pir. The program generates a row vector of 15 values, evenly spaced between 6 and 20, and then calculates the perimeters using the given formula.
For the second problem, the MATLAB program defines a radius vector ranging from 1 to 20 with increments of 1 and a constant height of 3. The surface area formula for a cylinder, 2pirh + 2pi*r^2, is used to calculate the surface areas. The program iterates through the radius vector, calculating the surface area for each radius and storing the results.
By executing the MATLAB program, the perimeters of the circles with the specified radii and the surface areas of the cylinders with the given radii and height are computed.
Learn more about Radius of Circle: brainly.com/question/28162977
#SPJ11
Using MATLAB, the program calculates the perimeters of circles with radii evenly spaced between 6 feet and 20 feet, and the surface areas of cylinders with radii ranging from 1 to 20 and height 3.
To solve the first problem, we can use MATLAB to define the radius vector and calculate the perimeters of the circles using the formula 2pir. The program generates a row vector of 15 values, evenly spaced between 6 and 20, and then calculates the perimeters using the given formula.
For the second problem, the MATLAB program defines a radius vector ranging from 1 to 20 with increments of 1 and a constant height of 3. The surface area formula for a cylinder, 2pirh + 2pi*r^2, is used to calculate the surface areas. The program iterates through the radius vector, calculating the surface area for each radius and storing the results.
By executing the MATLAB program, the perimeters of the circles with the specified radii and the surface areas of the cylinders with the given radii and height are computed.
Learn more about Radius of Circle: brainly.com/question/28162977
#SPJ11
Consider the system of equations shown below.
2x4y+ 52- 8
-7x+14y+4z-28
3x-6y+ 12
(a) Determine whether the nonhomogeneous system Ax b is consistent.
consistent
inconsistent
The nonhomogeneous system Ax b is consistent.The correct answer is option (a) consistent.
Given system of equations : 2x + 4y + 5 = 28 ........(1)
-7x + 14y + 4z = 28 ...(2)
3x - 6y = -12 ........(3)
Solution: We need to represent the given system of equations in the form of [A| b], where A is the coefficient matrix and b is the column matrix containing the constants on the right side of the equations.
[A| b] = 2 4 1 5 -7 14 4 28 3 -6 0 -12We know that a non-homogeneous system Ax = b has a solution if and only if r(A) = r([A| b]) = r , where r is the rank of the matrix A.
We can find the rank of matrix A by row-reducing the matrix [A| b].
Reduced row echelon form of the matrix [A| b]: 1 2 0 3 | -3 0 0 1 0 | 4 0 0 0 | 0
From the reduced row echelon form, we can see that the rank of A is 3 and the rank of [A| b] is 3.
Therefore, the system Ax = b is consistent.
Hence, the correct answer is option (a) consistent.
Learn more about system of equations
https://brainly.com/question/21620502
#SPJ11
The nonhomogeneous system Ax = b is inconsistent. The correct answer is Option B.
The given system of equations can be represented as:
2x + 4y = 52 - 8
-7x + 14y + 4z = -28
3x - 6y = 12
To determine whether the nonhomogeneous system Ax = b is consistent, we need to check if the system has a solution or not. This can be done by solving the system of equations using various methods such as substitution, elimination, or matrix operations.
Let's solve the system using the elimination method:
1. Multiply the first equation by -7 and the second equation by 2 to eliminate the x term:
-14x - 28y = -364
-14x + 28y + 8z = -56
2. Add the two equations:
0 = -420
The resulting equation is inconsistent since 0 does not equal -420. Therefore, the system of equations is inconsistent, and there is no solution.
In summary, the nonhomogeneous system Ax = b is inconsistent.
Learn more about nonhomogeneous system
https://brainly.com/question/33623548
#SPJ11
Given two points, how many different planes pass through the two points?
Answer:
an infinite number of planes
Step-by-step explanation:
i looked it up
Pre-Laboratory Exercise: Prepare the lab notebook to collect data. You will transfer the answers to this document after the lab. In complete sentences in your lab notebook answer the following questions: 1. What is the effect of an increase in temperature on molecular velocity? 2. How does this change affect the force of the gas molecules collisions with the walls of the container? 3. What is the resultant change in pressure in a closed system that cannot expand? 4. What is the resultant volume change in a system that can expand and contract, but whose pressure is constant if you increase the temperature of the system?
An increase in temperature leads to an increase in the molecular velocity of gases because higher temperature causes greater molecular motion and collision.
An increase in molecular velocity, in turn, leads to more frequent and harder collisions between gas molecules and the walls of the container, causing an increase in the force of collisions. In a closed system that cannot expand, an increase in pressure is observed due to the more frequent and harder collisions that are taking place between the gas molecules and the walls of the container.
The volume change in a system that can expand and contract, but whose pressure is constant, will increase upon an increase in temperature of the system. The increase in temperature results in an increase in molecular velocity and a corresponding increase in kinetic energy of the molecules. Due to this kinetic energy, the molecules move farther apart from one another, causing the volume of the system to increase.
To know more about visit:
https://brainly.com/question/29062095
#SPJ11
hey, can someone help me with this it's something I can't really understand I'm not the best with math There are seven Jugs. Your task is to pour water into these jugs, from jugs to other jugs, or empty jugs until you have exactly 2 liters remaining in a single jug.
• 113 liters
• 127 liters
• 139 liters
• 157 liters
• 173 liters
• 191 liters
• 206 liters
Rules
1. You can fill a jug to its maximum capacity.
2. You can empty a jug completely.
3. You can transfer the contents of one jug into another until the receiving jug is either full or the source jug is empty.
By using the jugs with capacities of 127 liters and 73 liters, we can achieve the desired result of having exactly 2 liters remaining in one of the jugs.
To solve this problem, we need to analyze the capacities of the jugs and find a combination of pouring and transferring water that results in exactly 2 liters remaining in one jug. Let's go through the process step by step:
Look for combinations of jug capacities that add up to or are close to 2 liters. We can see that 127 liters + 73 liters = 200 liters, which is close to our target of 2 liters.
Start with the jug of capacity 127 liters filled to its maximum capacity.
Transfer the contents of the 127-liter jug to the 73-liter jug. Now the 73-liter jug contains 73 liters, and the 127-liter jug is empty.
Next, transfer the 73 liters from the 73-liter jug to the 127-liter jug, which can accommodate the entire amount. Now the 127-liter jug contains 73 liters, and the 73-liter jug is empty.
Fill the 73-liter jug to its maximum capacity.
Transfer the contents of the 73-liter jug to the 127-liter jug until the 127 liter jug is full. Now the 73-liter jug is empty, and the 127-liter jug contains 73 liters.
At this point, we have exactly 2 liters remaining in the 127-liter jug, fulfilling the given condition.
For more such questions on capacities visit:
https://brainly.com/question/30490732
#SPJ8
his question has two parts. Be sure to answer both parts of the question.
PART A
An online music store sells songs on its website. Each song is the same price. The
Create an equation to represent the relationship between the total cost, c, and the n
Enter your equation in the box below.
1
个
8
2 3
+
%
A. An equation to represent the relationship between the total cost and the number of songs purchased is c = 1.25s.
B. At this rate, 20 songs can be purchased for $25.
How to create an equation for the total cost?Assuming the variable x represent the price of each song, we have the following:
8x = 10
x = 10/8
x = 1.25
Therefore, the price of each song is equal to $1.25.
Part A.
In this context, an equation that shows the relationship between the total cost (c) and the number of songs (s) sold by this online music store can be determined as follows;
c = xs
c = 1.25s
Part B.
At this rate, the number of songs that can be purchased for $25 can be determined as follows;
c = 1.25s
25 = 1.25s
s = 25/1.25
s = 20 songs.
Read more on equation here: https://brainly.com/question/22874049
#SPJ1
Complete Question:
An online music store sells songs on its website. each song is the same price. The cost to purchase 8 songs is $10.
A. Create an equation to represent the relationship between the total cost, c, and the number of songs, s, purchased.
B. At this rate, how many songs can be purchased for $25
Consider a sample with data values of 10,20,11,17, and 12 . Compute the mean and median. mean median ASWSBE14 3.E.002. Consider a sample with data values of 10,20,21,18,16 and 17 . Compute the mean and median. mean median [-/3 Points] ASWSBE14 3.E.006.MI. Consider a sample with data values of 51,54,71,58,65,56,51,69,56,68, and 51 . Compute the mean. (Round your answer to two decimal places.) Compute the median. Compute the mode.
The mean is the average value of a set of data. To calculate the mean, you add up all the data values and then divide the sum by the number of values in the set.
For the first sample with data values of 10, 20, 11, 17, and 12, the mean can be calculated as follows:
(10 + 20 + 11 + 17 + 12) / 5 = 70 / 5 = 14
So, the mean of this sample is 14.
The median is the middle value in a set of data when the data is arranged in order. If there is an even number of values, the median is the average of the two middle values.
For the first sample with data values of 10, 20, 11, 17, and 12, the median can be calculated as follows:
First, arrange the data in order: 10, 11, 12, 17, 20
Since there are 5 values, the middle value is the third value, which is 12.
So, the median of this sample is 12.
Now, let's move on to the second sample with data values of 10, 20, 21, 18, 16, and 17.
To calculate the mean:
(10 + 20 + 21 + 18 + 16 + 17) / 6 = 102 / 6 = 17
So, the mean of this sample is 17.
To calculate the median:
First, arrange the data in order: 10, 16, 17, 18, 20, 21
Since there are 6 values, the middle values are the third and fourth values, which are 17 and 18. To find the median, we take the average of these two values:
(17 + 18) / 2 = 35 / 2 = 17.5
So, the median of this sample is 17.5.
Lastly, let's consider the third sample with data values of 51, 54, 71, 58, 65, 56, 51, 69, 56, 68, and 51.
To calculate the mean:
(51 + 54 + 71 + 58 + 65 + 56 + 51 + 69 + 56 + 68 + 51) / 11 = 660 / 11 = 60
So, the mean of this sample is 60.
To calculate the median:
First, arrange the data in order: 51, 51, 51, 54, 56, 56, 58, 65, 68, 69, 71
Since there are 11 values, the middle value is the sixth value, which is 56.
So, the median of this sample is 56.
Please note that the mode refers to the value(s) that appear most frequently in a set of data. In the given questions, mode is not requested for the first and second samples. However, if you need to calculate the mode for the third sample, it would be 51, as it appears three times, which is more than any other value in the set.
Know more about mean:
https://brainly.com/question/31101410
#SPJ11
Choose the inequality that has that solution shown on the graph.
Answer: x > -1.5
I'm not sure if the variable you have is an x, but it will still be the same answer- just replace the variable with whatever one you have.
If you need the answer in a fraction, let me know.
And in case your number isn't a variable, any number MORE THAN, or GREATER THAN -1.5, will be correct.
Possible answers:
2 > -1.5
14 > -1.5
-1 > -1.5
Explanation: The open circle indicates that the sign is either less then (<) or greater than (>). If the circle was closed, it would then indicate less than or equal to, or greater than or equal to.
The open circle is at -1.5, and is going to the right. Meaning all the possible answers are higher or greater than -1.5.
Hope this helps! :)
Let x = (-2, 3a²), y = (-a, 1) and z = (3-a, -1) be vectors in R². Part (a) [3 points] Find the value(s) of a such that y and z are parallel. Justify your answer. Part (b) [3 points] Find the value(s) of a such that X and y are orthogonal.
x and y are orthogonal when a = 0 or a = 2/3.
Given vectors in R² are x = (-2, 3a²), y = (-a, 1) and z = (3-a, -1).
The two vectors are parallel if the vector z is some nonzero scalar multiple of the vector y.
So we get, -a/(3 - a) = 1/-1
On cross multiplying, we get, -a = -3 + a
⇒ a + a = 3
⇒ a = 3/2
Thus, y and z are parallel when a = 3/2.
The vectors x and y are orthogonal when the dot product of x and y is equal to zero.
x.y = -2(-a) + 3a²(1) = 0
⇒ 2a - 3a² = 0
⇒ a(2 - 3a) = 0
⇒ a = 0 or a = 2/3
Hence, x and y are orthogonal when a = 0 or a = 2/3.
To know more about orthogonal visit:
https://brainly.com/question/32196772
#SPJ11
1.
a. Explain 'viscous dissipation' of momentum.
b. What is the physical significance of Froude no.?
c. Write down the continuity equation in spherical coordinate
system.
d. Explain 'No-Slip' conditio
a. Viscous dissipation of momentum refers to the conversion of kinetic energy into heat energy due to the internal friction or viscosity within a fluid.
b. The Froude number is a dimensionless parameter that compares the inertial forces to the gravitational forces in a fluid flow, providing insights into the flow regime.
c. The continuity equation in spherical coordinate system is given as:
(1/r²) * ∂(r²ρ)/∂r + (1/r*sinθ) * ∂(ρsinθ)/∂θ + (1/r*sinθ) * ∂ρ/∂φ = 0
d. The "No-Slip" condition states that at a solid boundary, the fluid velocity relative to the boundary is zero, implying that the fluid sticks to and moves with the solid surface.
a. Viscous dissipation is a physical phenomenon that occurs when energy is converted from macroscopic kinetic energy to microscopic kinetic energy by frictional forces within a fluid. Viscous dissipation occurs when the fluid moves over a solid surface, and the interaction between the fluid and the surface generates frictional forces. These forces convert the fluid's macroscopic kinetic energy into microscopic kinetic energy, which generates heat.
b. The Froude number is a dimensionless number used to describe the ratio of inertial forces to gravitational forces in a fluid system. It has significance in physical applications involving fluid flow and can be used to determine the behavior of waves and other disturbances in a fluid. The Froude number is given as:
Fr = (V^2/gL)
where V is the velocity of the fluid, g is the acceleration due to gravity, and L is the length scale of the system. The Froude number provides information about the fluid's resistance to deformation and its ability to generate waves.
c. The continuity equation in spherical coordinate system is given as:
(1/r^2)(∂/∂r)(r^2ρu) + (1/rsinθ)(∂/∂θ)(sinθρv) + (1/rsinθ)(∂/∂φ)(ρw) = 0
where ρ is the fluid density, u, v, and w are the fluid velocities in the r, θ, and φ directions, respectively.
d. The no-slip condition is a boundary condition used to describe the interaction between a fluid and a solid surface. It states that the fluid velocity at the solid surface is zero. This condition arises from the fact that the fluid's viscosity generates frictional forces at the boundary between the fluid and the solid surface. The no-slip condition is essential in determining the fluid's behavior in many applications, such as fluid flow over a surface or fluid mixing in a container. The no-slip condition helps in developing models to predict fluid behavior and optimize system performance.
Learn more about coefficent of friction:
brainly.com/question/13923375
#SPJ11
A 2-bed carbon adsorption system is to be designed to handle 2400 acfm of air containing 680 ppm of pentane (C_5H_12). The theoretical adsorption capacity is 9.6 kg pentane per 100 kg carbon. Determine the mass of carbon and length and width of each bed, assuming a 2-hour regeneration time, 2 foot bed depth, and carbon density of 28 lb/ft^3.
At regeneration, the bed should be heated to about 200°C to 230°C to release the pentane from the carbon.The flow rate of air = 2400 acfm ,The mass of carbon required to handle the air stream is 17 kg.
The concentration of pentane in the air stream = 680 ppm
The theoretical adsorption capacity = 9.6 kg pentane per 100 kg carbon
Time for regeneration = 2 hours
Depth of the bed = 2 ft
Carbon density = 28 lb/ft³
Now,The mass of pentane in the air = 2400 × 680 / 1,000,000= 1.632 kg/hour
Let the mass of carbon required = M kg
For every 100 kg carbon, the amount of pentane adsorbed = 9.6 kg
Hence, the amount of pentane adsorbed on M kg carbon,= (9.6 / 100) × M kgAs
the concentration of pentane in the air = 680 ppm,
Therefore, the amount of carbon required,
M = (1.632 / 1000) × (100 / 9.6) × 1000= 17 kg
The volume of the adsorption bed =
Flow rate / bed velocity= 2400 / (2 × 60 × 60 × 2)
= 0.1667 ft³/secAs,
Carbon density = 28 lb/ft³,
To know more about mass visit:
https://brainly.com/question/31820530
#SPJ11
The concept of shear flow, q, allows us to calculate ... a torsional moment ____ a vertical force ______ a horizontal force
The concept of shear flow, q, allows us to calculate a torsional moment, vertical force, and horizontal force.
Shear flow is a concept that is commonly used in structural engineering and refers to the distribution of shear stress within a structure. The concept of shear flow is important because it enables us to calculate the shear force distribution within a structure and how that force is transmitted throughout the structure.The concept of shear flow is closely related to torsion, which is a type of deformation that occurs when a structural member is twisted around its longitudinal axis. The torsional moment that is created by this deformation is directly related to the shear stress that is experienced by the structural member.
To calculate the distribution of shear stress within a structure, we use the concept of shear flow, which is defined as the shear stress per unit area. The value of q can be calculated using the following formula:
q = VQ / It
where V is the shear force,
Q is the first moment of area,
I is the moment of inertia, and t is the thickness of the structural member.
The concept of shear flow also allows us to calculate the torsional moment, vertical force, and horizontal force that are created by the shear stress within a structure.
Specifically, we can use the following equations to calculate these values:
Torsional moment = qA
Vertical force = qI
Horizontal force = qJ,
where A is the area, I is the moment of inertia, and J is the polar moment of inertia.
To know more about shear flow, visit:
https://brainly.com/question/12975636
#SPJ11
Mason ran 4 4/5 miles in 3/5 hour What was masons average speed in miles per hour
Answer:
The average speed is 8 miles per hour.
Step-by-step explanation:
To find the average speed, we take the distance and divide by the time.
4 4/5 ÷ 3/5
Change the mixed number to an improper fraction.
4 4/5 = (5*4 +4)/5 = 24/5
24/5 ÷ 3/5
Copy dot flip
24/5 * 5/3
Rewriting the problem
24/3 * 5/5
8*1
8
The average speed is 8 miles per hour.
A radiation counter is to be used to determine the radioactivity of a sample using the following procedure: 1. The detector is calibrated; its counting efficiency is found to be 5.09%, with negligible uncertainty. 2. The unknown sample is placed in the detector for 60 seconds; 5943 counts are registered. 3. The sample is removed and the counter is operated for 60 seconds; 298 counts are registered. (a) (2 points) Explain briefly how the counter is calibrated in Step 1. Answer:. (b) (3 points) What is the best estimate of the background count rate (in cps) and its standard uncertainty? (c) (3 points) What is the best estimate of the gross count rate (in cps) and its standard uncertainty? (c) (4 points) What is the best estimate of the sample activity (in Bq) and its standard uncertainty?
Radioactivity refers to the spontaneous emission of radiation from the nucleus of an unstable atomic nucleus. It occurs in certain types of atoms that have an unstable arrangement of protons and neutrons.
a) In Step 1, the radiation counter is calibrated by determining its counting efficiency. The counting efficiency represents the fraction of radiation emitted by the source that is detected by the counter.
To calibrate the detector, a known radioactive source with known activity is placed in the detector for a specific amount of time, and the number of counts registered by the detector is recorded. This known activity is used to calculate the counting efficiency of the detector.
b) The background count rate refers to the number of counts registered by the detector when no radioactive sample is present. To estimate the background count rate, we can subtract the counts registered by the detector in Step 3 (298 counts) from the counts registered in Step 2 (5943 counts). In this case, the background count rate is 5943 - 298 = 5645 counts. The standard uncertainty can be calculated by taking the square root of the background count rate, which is √5645 ≈ 75.1 counts.
c) The gross count rate represents the total number of counts registered by the detector when the radioactive sample is present. To estimate the gross count rate, we can subtract the background count rate from the counts registered in Step 2. In this case, the gross count rate is 5943 - 5645 = 298 counts. The standard uncertainty remains the same as the background count rate, which is approximately 75.1 counts.
d) The sample activity refers to the rate at which the radioactive sample is emitting radiation. To estimate the sample activity, we can divide the gross count rate by the counting efficiency. In this case, the sample activity is 298 counts / 0.0509 = 5845 cps (counts per second). The standard uncertainty can be calculated using error propagation, taking into account the uncertainties in the gross count rate and counting efficiency.
To know more about Protons And Neutrons visit:
https://brainly.com/question/13668134
#SPJ11
The gascous elementary reaction (A+B+2C) takes place isothermally at a steady state in a PBR. 20 kg of spherical catalysts is used. The feed is equimolar and contains only A and B. At the inlet, the total molar flow rate is 10 mol/min and the total volumetric flow rate is 5 dm'. kA is 1.3 dm" (mol. kg. min) Consider the following two cases: • Case (1): The volumetric flow rate at the outlet is 4 times the volumetric flow rate at the inlet. • Case (2): The volumetric flow rate remains unchanged. a) Calculate the pressure drop parameter (a) in case (1). [15 pts b) Calculate the conversion in case (1). [15 pts/ c) Calculate the conversion in case (2). [10 pts d) Comment on the obtained results in b) and c). [
Let's break down the problem step-by-step.
a) To calculate the pressure drop parameter (a) in case (1), we need to use the following formula:
a = (ΔP * V) / (F * L * ρ)
where:
ΔP = pressure drop
V = volume of catalysts used
F = molar flow rate at the inlet
L = volumetric flow rate at the outlet
ρ = density of the catalysts
Given:
ΔP = unknown
V = 20 kg
F = 10 mol/min
L = 4 * volumetric flow rate at the inlet (which is 5 dm³/min)
ρ = unknown
To solve for ΔP, we need to find the values of ρ and L first.
We know that the total molar flow rate at the inlet (F) is 10 mol/min and the total volumetric flow rate at the inlet is 5 dm³/min. Since the feed is equimolar and contains only A and B, we can assume that each component has a molar flow rate of 5 mol/min (10 mol/min / 2 components).
Now, let's find the density (ρ) using the given information. The density is the mass per unit volume, so we can use the formula:
ρ = V / m
where:
V = volume of catalysts used (20 kg)
m = mass of catalysts used
Since the mass of catalysts used is not given, we cannot calculate the density (ρ) at this time. Therefore, we cannot solve for the pressure drop parameter (a) in case (1) without additional information.
b) Since we don't have the pressure drop parameter (a), we cannot directly calculate the conversion in case (1) using the given information. Additional information is needed to solve for the conversion.
c) In case (2), the volumetric flow rate remains unchanged. Therefore, the volumetric flow rate at the outlet is the same as the volumetric flow rate at the inlet, which is 5 dm³/min.
To calculate the conversion in case (2), we can use the following formula:
Conversion = (F - F_outlet) / F
where:
F = molar flow rate at the inlet (10 mol/min)
F_outlet = molar flow rate at the outlet (which is the same as the molar flow rate at the inlet, 10 mol/min)
Using the formula, we can calculate the conversion in case (2):
Conversion = (10 mol/min - 10 mol/min) / 10 mol/min
Conversion = 0
Therefore, the conversion in case (2) is 0.
d) In case (1), we couldn't calculate the pressure drop parameter (a) and the conversion because additional information is needed. However, in case (2), the conversion is 0. This means that there is no reaction happening and no conversion of reactants to products.
Overall, we need more information to solve for the pressure drop parameter (a) and calculate the conversion in case (1). The results in case (2) indicate that there is no reaction occurring.
To know more about pressure drop parameter :
https://brainly.com/question/33226418
#SPJ11
(Q1c) Derwent Dam can be approximated as rectangle with a vertical face (on the upstream side) that is 32.2 m in height and has length of 320.4 m. Calculate the location of the centre of pressure against the dam, relative to the fluid surface (in m).
The center of pressure against the dam, relative to the fluid surface is 16.1 m.
The center of pressure is the point at which the total hydrostatic force acts on a plane. To determine the center of pressure, it is necessary to know the height, width, and location of the liquid surface.
The center of pressure is determined by dividing the first moment of area above the centroid by the total area of the surface.
Since the centroid is located at one-half of the vertical height of the rectangle, we may make use of this relationship to calculate the location of the center of pressure.
So, let's calculate the location of the centre of pressure against the dam, relative to the fluid surface in m as follows:
The area of the rectangle = L x H = 320.4 m x 32.2 m
= 10314.48 m²
The first moment of area above the centroid = (H/2) × A
= 32.2 m/2 × 320.4 m
= 5173.44 m³
To get the center of pressure (CP), divide the first moment of area by the total area of the surface.
So, CP = 1.5H - yCP where yCP is the distance from the top of the dam to the center of pressure.
So, yCP = (1.5H - CP)
= 1.5 (32.2 m) - 5173.44 m³/10314.48 m²
= 16.1 m
The location of the centre of pressure against the dam, relative to the fluid surface is 16.1 m.
Hence, the center of pressure against the dam, relative to the fluid surface is 16.1 m.
To know more about hydrostatic force, visit:
https://brainly.com/question/33505973
#SPJ11
Who will be responsible for providing the documents that locate the property's boundaries and the location of the project on site for the BOP project? A) SPD B).BOP C) DSA D) MCM
Responsibility for providing boundary and project location documents depends on the specific project and contractual agreements.
Based on the information provided, it is not possible to determine with certainty who will be responsible for providing the documents that locate the property's boundaries and the location of the project on site for the BOP project.
The responsible party can vary depending on the specific project and contractual agreements. However, in general, it is common for the responsibility to lie with either the BOP (Business Owner/Operator) or the DSA (Designated Survey Authority) as they typically have access to the necessary documents and resources for determining property boundaries and project location on site.
It is advisable to consult the project contract or contact the relevant stakeholders to ascertain the exact responsibility in this particular project.
To learn more about “boundary” refer to the https://brainly.com/question/17414539
#SPJ11
The mix proportion (without adjustments) by weight (SSD) is for concrete mix designed according to ACI 211. The fresh concrete density was 2370 kg/m3 and w/c=0.4. The content of fine aggregate (SSD) is equal to 600 kg per cubic meter and entrapped air is 2%. The specific gravity for .coarse and fine aggregates is 2.67 and 2.65 respectively 1:2.89 3.86 O 1: 1.27:2.35 O 1:1.85: 2.73 O 1: 2.31: 3.37 O
Answer: the mix proportion (without adjustments) by weight (SSD) for the concrete mix designed according to ACI 211 is not directly provided. It requires additional information such as the weight of water and the desired cement content to determine the mix proportion accurately.
The mix proportion (without adjustments) by weight (SSD) for the concrete mix designed according to ACI 211 can be determined using the given information.
Step 1: Calculate the absolute volume of fine aggregate:
Absolute volume of fine aggregate = (content of fine aggregate in kg per cubic meter) / (density of fine aggregate in kg/m3)
Absolute volume of fine aggregate = 600 kg/m3 / 2370 kg/m3
Absolute volume of fine aggregate = 0.253
Step 2: Calculate the absolute volume of entrapped air:
Absolute volume of entrapped air = (volume of entrapped air in %) / 100
Absolute volume of entrapped air = 2% / 100
Absolute volume of entrapped air = 0.02
Step 3: Calculate the absolute volume of coarse aggregate:
Absolute volume of coarse aggregate = 1 - (w/c + absolute volume of fine aggregate + absolute volume of entrapped air)
Absolute volume of coarse aggregate = 1 - (0.4 + 0.253 + 0.02)
Absolute volume of coarse aggregate = 0.327
Step 4: Calculate the weight of fine aggregate:
Weight of fine aggregate = (absolute volume of fine aggregate) * (density of fine aggregate)
Weight of fine aggregate = 0.253 * 2370 kg/m3
Weight of fine aggregate = 600 kg
Step 5: Calculate the weight of coarse aggregate:
Weight of coarse aggregate = (absolute volume of coarse aggregate) * (density of coarse aggregate)
Weight of coarse aggregate = 0.327 * (density of coarse aggregate)
Weight of coarse aggregate = 0.327 * (2.67 * 1000) kg/m3
Weight of coarse aggregate = 878.7 kg
Step 6: Calculate the weight of water:
Weight of water = (w/c) * (weight of cement)
Weight of water = 0.4 * (weight of cement)
Step 7: Calculate the weight of cement:
Weight of cement = (weight of water) / (w/c)
Weight of cement = (weight of water) / 0.4
Based on the given information, the mix proportion (without adjustments) by weight (SSD) for the concrete mix designed according to ACI 211 is not directly provided. It requires additional information such as the weight of water and the desired cement content to determine the mix proportion accurately.
To learn more about volume of coarse aggregate:
https://brainly.com/question/33592443
#SPJ11
An intersection has the following intersection crashes over a one-year period. Fatalities - 4 A Injuries - 4 B Injuries - 10 C Injuries - 12 PDO crashes - 26 If Fatality and A injuries have a factor of 16 and B and C injuries have a factor of 3, what is the EPDO for the intersection? Round your answer to the nearest whole number.
An intersection has the following intersection crashes over a one-year period. The EPDO for the intersection is approximately equal to 5.
Fatalities - 4A Injuries - 4B Injuries - 10C Injuries - 12PDO crashes - 26The equation for calculating EPDO is EPDO = (1 * fatalities) + (0.16 * A injuries) + (0.03 * B injuries) + (0.03 * C injuries) + (0 * PDO crashes).
So, we can substitute the given values in the equation to find out the EPDO for the intersection. Given, Fatalities
= 4, A Injuries
= 4, B Injuries
= 10, C Injuries
= 12, and PDO crashes
= 26.
The value of EPDO for the intersection is,EPDO
= (1 * 4) + (0.16 * 4) + (0.03 * 10) + (0.03 * 12) + (0 * 26)EPDO
= 4 + 0.64 + 0.3 + 0.36 + 0EPDO
= 5.3 ~ 5.
Hence, the EPDO for the intersection is approximately equal to 5.
To know more about intersection visit :
https://brainly.com/question/12089275
#SPJ11
An aqueous methanol, CH3OH, solution has a mole fraction of 0.613 of methanol. What is the mass percentage of water in this solution? a) 26.2% b )73,8% c) 29.4% d) 38.7% e). 11.0%
The mass percentage of water in 29.4%.The correct answer is c
We can then calculate the mass of methanol in the solution, as shown below:
Mass of methanol = mole fraction of methanol × molecular mass of methanol × mass of solution
Mass of methanol = 0.613 × 32 × 100 g
= 1961.6 g
We can then calculate the mass of water in the solution, as shown below: Mass of water = mole fraction of water × molecular mass of water × mass of solution
Mass of water = 0.387 × 18 × 100 g
= 697.2 g
The total mass of the solution is then given by: Total mass of solution = mass of methanol + mass of water
Total mass of solution = 1961.6 + 697.2 g
= 2658.8 g
Finally, we can calculate the mass percentage of water in the solution using the formula below: Mass percentage of water = (mass of water ÷ total mass of solution) × 100%Mass percentage of water
= (697.2 ÷ 2658.8) × 100%
≈ 26.2 %
To know more about mass percentage visit:-
https://brainly.com/question/7730336
#SPJ11
help!
Find, correct to the nearest degree, the three angles of the triangle with the given vertices. A(3, 0), B(5, 6), C(-1, 5), CAB= ABC = BCA = Need Help? Submit Answer Read It
The three angles of the triangle are approximately 39°, 60°, and 80°.
To find the angles of the triangle with vertices A(3, 0), B(5, 6), and C(-1, 5), we can use the distance formula and the Law of Cosines. Let's calculate the distances between the vertices first:
AB = sqrt((5-3)^2 + (6-0)^2) = sqrt(4 + 36) = sqrt(40) = 2√10 BC = sqrt((-1-5)^2 + (5-6)^2) = sqrt(36 + 1) = sqrt(37) AC = sqrt((-1-3)^2 + (5-0)^2) = sqrt(16 + 25) = sqrt(41)
Now, let's find the angles using the Law of Cosines:
cos(CAB) = (AC^2 + AB^2 - BC^2) / (2 * AC * AB) cos(ABC) = (AB^2 + BC^2 - AC^2) / (2 * AB * BC) cos(BCA) = (BC^2 + AC^2 - AB^2) / (2 * BC * AC)
Using the given formula, we can calculate the cosines of the angles and then find their respective angles using the inverse cosine function (arccos). Finally, we round the angles to the nearest degree:
CAB ≈ arccos((41 + 40 - 37) / (2 * sqrt(41) * 2√10)) ≈ arccos(44/4√410) ≈ 39° ABC ≈ arccos((40 + 37 - 41) / (2 * 2√10 * sqrt(37))) ≈ arccos(36/4√370) ≈ 60° BCA ≈ arccos((37 + 41 - 40) / (2 * sqrt(37) * sqrt(41))) ≈ arccos(38/√1507) ≈ 80°
Learn more about triangle
https://brainly.com/question/17335144
#SPJ11
Explain how waste disposal by landfill emits anthropogenic GHG and formulate the calculation for the CO2-e emission factor of landfill disposal of municipal solid waste (MSW).
The factor 28 is used to account for the higher global warming potential (GWP) of methane than CO2.
Landfills are large pits or sites where waste is dumped into a hole in the ground and buried. However, landfill sites have become one of the significant sources of anthropogenic greenhouse gas (GHG) emissions. This is due to the anaerobic decomposition of biodegradable waste that releases GHG, especially methane (CH4) and carbon dioxide (CO2). This process is known as Landfill Gas (LFG) emissions.
The quantity of GHG that is released into the atmosphere is determined by the amount of waste disposed of and the length of time it takes for the waste to decompose. The LFG can be captured and utilized, and this can help reduce the GHG emissions from landfills. The capture of LFG also has an environmental benefit in terms of reducing the odors and pests that are associated with landfills.
Calculation for the CO2-e emission factor of landfill disposal of municipal solid waste (MSW)
The emission factor for landfill disposal of municipal solid waste (MSW) is the rate of GHG emissions per unit of waste disposed of in the landfill. It is usually measured in kilograms of CO2 equivalent (CO2-e) per metric ton of waste disposed of.
The calculation of the CO2-e emission factor for landfill disposal of MSW is given as:
E = (CH4 × 28) + (CO2 × 1)
Where E = CO2-e emission factor
CH4 = Methane emissions
CO2 = Carbon dioxide emissions
The factor 28 is used to account for the higher global warming potential (GWP) of methane than CO2.
The CO2-e emission factor for landfill disposal of MSW is about 0.6 to 1.1 tons of CO2-e per metric ton of waste disposed of. This implies that for every metric ton of waste that is disposed of in a landfill, about 0.6 to 1.1 tons of CO2-e are emitted into the atmosphere.
To know more about methane, visit:
https://brainly.com/question/12645626
#SPJ11
A rectangular prism is 16 meters wide and 19 meters high. Its volume is 6,049. 6 cubic meters. What is the length of the rectangular prism?
The length of the rectangular prism is 20 meters.
1. We know that the volume of a rectangular prism is given by the formula V = lwh, where l represents the length, w represents the width, and h represents the height.
2. In this case, we are given that the width (w) is 16 meters and the height (h) is 19 meters. The volume (V) is given as 6,049.6 cubic meters.
3. Plugging the given values into the volume formula, we have 6,049.6 = l * 16 * 19.
4. To find the length (l), we need to isolate it on one side of the equation. Dividing both sides of the equation by (16 * 19), we get l = 6,049.6 / (16 * 19).
5. Evaluating the expression on the right-hand side, we have l = 6,049.6 / 304.
6. Simplifying the division, we find l = 20 meters.
Therefore, the length of the rectangular prism is 20 meters.
For more such questions on length, click on:
https://brainly.com/question/28322552
#SPJ8
The volume of a cone is 763.02 cubic inches. The radius and height of the cone are equal. What is the radius of the cone? Use 3.14 for π.
The radius of the cone is approximately 9.1 inches.
To find the radius of the cone, we can use the formula for the volume of a cone, which is given by V = (1/3) * π * r^2 * h, where V is the volume, π is approximately 3.14, r is the radius, and h is the height.
In this case, we are given that the volume of the cone is 763.02 cubic inches and the radius and height are equal. Let's denote the radius and height as r and h, respectively.
So, we have the equation 763.02 = (1/3) * 3.14 * r^2 * h.
Since the radius and height are equal, we can simplify the equation to 763.02 = (1/3) * 3.14 * r^2 * r.
Simplifying further, we get 763.02 = (1/3) * 3.14 * r^3.
Multiplying both sides by 3, we have 2289.06 = 3.14 * r^3.
Dividing both sides by 3.14, we get approximately 728.24 = r^3.
Taking the cube root of both sides, we find that r ≈ 9.1 inches.
Therefore, the radius of the cone is approximately 9.1 inches.
For more questions on radius, click on:
https://brainly.com/question/27696929
#SPJ8
AutoCAD questions
18. Objects are drawn to scale in space and scaled to fit the plotter size in space. A Model, paper B. Paper, paper C. Paper, model D. Model, model 19. The centerline should end outside the hole or fe
The objects in AutoCAD are drawn to scale in model space and scaled to fit the plotter size in paper space.
In AutoCAD, there are two main spaces where objects are created and manipulated: model space and paper space. Model space represents the virtual three-dimensional environment where objects are drawn to their actual size and scale. Paper space, on the other hand, is where the drawing is arranged for printing or plotting on a specific paper size.
When working in model space, you create and design your objects at their intended size and scale. This allows you to accurately represent the dimensions and proportions of the real-world objects you are drawing. The objects in model space can be viewed and manipulated in three dimensions, giving you a comprehensive understanding of their spatial relationships.
However, when it comes to printing or plotting the drawing, it is often necessary to fit the entire design onto a specific paper size. This is where paper space comes into play. In paper space, you create a layout that represents the paper size you will be printing on. You can then insert your model space objects into this layout and scale them to fit the desired plotter size.
By drawing objects to scale in model space and scaling them to fit the plotter size in paper space, you can ensure that your printed or plotted output accurately represents the intended dimensions and proportions of your design.
The distinction between model space and paper space in AutoCAD allows for efficient design and plotting workflows. Model space provides a true representation of the objects' size and scale, while paper space enables you to arrange and scale the drawing for printing or plotting purposes. Understanding how to navigate between these spaces and utilize their features effectively is crucial for producing accurate and professional drawings in AutoCAD.
Learn more about: AutoCAD
brainly.com/question/30242226
#SPJ11
Determine the electron pair geometry molecular geometry for the following compound: SF6 a) Octahedral/Octahedral b)Octahedral/Square planar c)Trigonal bipyramidal / Trigonal bipyramidal d)Trigonal planar/Trigonal planar e)Trigonal bipyramidal/seesaw
The correct option of the given statement "Determine the electron pair geometry, molecular geometry for the following compound: SF6" is a) Octahedral/Octahedral.
The electron pair geometry and molecular geometry of a compound are determined by the arrangement of electron pairs around the central atom. In the case of SF6, sulfur (S) is the central atom, and it has six fluorine (F) atoms bonded to it. To determine the electron pair geometry, we need to consider both the bonding and non-bonding electron pairs around the central atom.
Step 1: Count the total number of electron pairs around the central atom.
In SF6, there are six bonding pairs (from the six S-F bonds) and no lone pairs of electrons on the central atom. Therefore, there are a total of six electron pairs.
Step 2: Determine the electron pair geometry.
The electron pair geometry describes the arrangement of all the electron pairs around the central atom, regardless of whether they are bonding or non-bonding pairs. In this case, with six electron pairs, the electron pair geometry is octahedral. This is because an octahedron has six vertices, and each electron pair occupies one of these positions.
Step 3: Determine the molecular geometry.
Molecular geometry considers only the arrangement of the bonding pairs around the central atom. In SF6, all six bonding pairs are attached to fluorine atoms, resulting in a symmetrical arrangement. Therefore, the molecular geometry is also octahedral.
This means that the electron pair geometry and molecular geometry of SF6 are both octahedral, with the sulfur atom at the center and the six fluorine atoms surrounding it in a symmetrical arrangement.
You can learn more about geometry at: brainly.com/question/30185738
#SPJ11
(a) Find the ningabily thst a call seiected of random lasta 7 miniates ef iesi:
To find the probability of a call being selected randomly in the last 7 minutes of the day, we need to consider the total number of calls during that time period and the total number of calls throughout the day. Hence the probability of a call being selected randomly in the last 7 minutes of the day is approximately 0.0049, or 0.49%.
Let's assume that the number of calls made during the day follows a uniform distribution, meaning that each minute is equally likely to have a call.
To calculate the probability, we first need to determine the total number of minutes in a day. There are 24 hours in a day, so 24 multiplied by 60 minutes gives us a total of 1440 minutes in a day.
Next, we need to determine the number of minutes in the last 7 minutes of the day. As stated in the question, this time period is 7 minutes.
Now, we can calculate the probability. The probability of a call being selected randomly in the last 7 minutes of the day is equal to the number of minutes in the last 7 minutes divided by the total number of minutes in a day.
Probability = (Number of minutes in the last 7 minutes) / (Total number of minutes in a day)
Probability = 7 / 1440
Simplifying this fraction gives us the final probability.
Probability = 1 / 205.71
As a result, the chance that a call will be picked at random in the final 7 minutes of the day is roughly 0.0049, or 0.49%.
To know more about "Probability":
https://brainly.com/question/13604758
#SPJ11
A sample of dry, cohesionless soil was subjected to a triaxial compression test that was carried out until the specimen failed at a deviator stress of 105.4 kN/m^2. A confining pressure of 48 kN/m^2 was used for the test.
a). calculate the soil's angle of internal friction.
b). calculate the normal stress at the failure plane..
The soil's angle of internal friction is 30°, and the normal stress at the failure plane is 100.7 kN/m².
The triaxial compression test determines a soil's strength and its ability to deform under various stresses.
Here are the steps to answer the given questions:
Given, Deviator stress (σd) = 105.4 kN/m²
Confining pressure (σ3) = 48 kN/m²
a) To calculate the soil's angle of internal friction, we use the formula for deviator stress:
σd = (σ₁ - σ³) / 2
Where, σ1 = maximum principle stress
= σd + σ³ = 105.4 + 48
= 153.4 kN/m²
Let's plug the values into the formula above to find the internal angle of friction:
105.4 kN/m² = (153.4 kN/m² - 48 kN/m²) / 2
Internal angle of friction, Φ = 30°
b) The formula to calculate the normal stress at the failure plane is:
[tex]\sigma n = (\σ\sigma_1 + \σ\sigma_3) / 2[/tex]
Where, σ₁ = maximum principle stress = 153.4 kN/m²
σ₃ = confining pressure
= 48 kN/m²
Let's plug the values into the formula above to find the normal stress:
σₙ = (153.4 kN/m² + 48 kN/m²) / 2σn
= 100.7 kN/m²
Therefore, the soil's angle of internal friction is 30°, and the normal stress at the failure plane is 100.7 kN/m².
To know more about triaxial compression test visit:
https://brainly.com/question/29835152
#SPJ11
from atop a 20-ft lookout tower, a fire is spotted due north through an angle of depression of 14.58 deg. firefighters located 1020 ft. due east of the tower must work their way through heavy foliage of the fire. by their compasses, through what angle (measured from the north toward the west, in degrees) must the firefighters travel?
The firefighters must travel approximately 274.37 degrees measured from the north toward the west.
To solve this problem, we can use trigonometry. Let's break down the information given:
- The angle of depression from the lookout tower to the fire is 14.58 degrees.
- The firefighters are located 1020 ft due east of the tower.
First, let's find the distance between the lookout tower and the fire. We can use the tangent function:
tangent(angle of depression) = opposite/adjacent
tangent(14.58 degrees) = height of tower/distance to the fire
We know the height of the tower is 20 ft. Rearranging the equation:
distance to the fire = height of tower / tangent(angle of depression)
= 20 ft / tangent(14.58 degrees)
≈ 78.16 ft
Now we have a right-angled triangle formed by the lookout tower, the fire, and the firefighters. We know the distance to the fire is 78.16 ft, and the firefighters are 1020 ft due east of the tower. We can use the inverse tangent function to find the angle the firefighters must travel:
inverse tangent(distance east / distance to the fire) = angle of travel
inverse tangent(1020 ft / 78.16 ft) ≈ 85.63 degrees
However, we want the angle measured from the north toward the west. In this case, it would be 360 degrees minus the calculated angle:
360 degrees - 85.63 degrees ≈ 274.37 degrees
Therefore, the firefighters must travel approximately 274.37 degrees measured from the north toward the west.
To know more about angle click-
https://brainly.com/question/25716982
#SPJ11
gemma has 4\5 meter of string. she cuts off a piece of string to hang a picture. Now Gemma has 1\4 meter of string . how many meters of string did Gemma use to hang the picture? make a equation to represent the word problem
Answer:
Equation: 0.8 = 0.25 + x
Answer: 0.55 meters or 11/20 meters
Step-by-step explanation:
The total amount of string = 4/5 m = 0.8 m
Used string (to hang the picture) = x m
Leftover string = 1/4 m = 0.25 m
Equation: 0.8 = 0.25 + x
Solve for x: x = 0.55 m = 11/20 m