In the case of the DC series motor, the back EMF of the motor is 202 V.
The equivalent circuit of a DC series motor and DC compound generator can be represented as follows:
The armature resistance (Ra) is connected in series with the armature winding.
The field resistance (Rf) is connected in series with the field winding.
The back electromotive force (EMF) (Eb) opposes the applied voltage (V).
For the specific case mentioned:
Given:
Applied voltage (V) = 220 V
Speed (N) = 800 rpm
Current (I) = 30 A
Armature resistance (Ra) = 0.6 Ω
Field resistance (Rf) = 0.8 Ω
To calculate the back EMF (Eb) of the motor, we can use the following formula:
Eb = V - I * Ra
Substituting the given values:
Eb = 220 V - 30 A * 0.6 Ω
= 220 V - 18 V
= 202 V
To know more about armature resistance, here
brainly.com/question/32332966
#SPJ4
--The complete Question is, What is the equivalent circuit of a DC series motor and DC compound generator? In a specific case, a 220 V DC series motor runs at 800 rpm and draws a current of 30A. The armature resistance is 0.6 Ω, and the field resistance is 0.8 Ω. Calculate the back EMF of the motor.--
Is the elastic potential energy stored in a spring greater when the spring is stretched by 3 cm or when it is compressed by 3 cm? Explain your answer.(4 marks) 4. Two people are riding inner tubes on an ice-covered (frictionless) lake. The first person has a mass of 65 kg and is travelling with a speed of 5.5 m/s. He collides head-on with the second person with a mass of 140 kg who is initially at rest. They bounce apart after the perfectly elastic collision. The final velocity of the first person is 2.1 m/s in the opposite direction to his initial direction. (a) Are momentum and kinetic energy conserved for this system? Explain your answer. (b) Determine the final velocity of the second person. (6 marks)
The elastic potential energy stored in a spring is greater when the spring is stretched by 3 cm. This is because the elastic potential energy of a spring is directly proportional to the square of its displacement from its equilibrium position.
(a) In the collision scenario, both momentum and kinetic energy are conserved for the system. Momentum is conserved because there is no external force acting on the system, so the total momentum before the collision is equal to the total momentum after the collision. The total kinetic energy before the collision is equal to the total kinetic energy after the collision.
(b) To determine the final velocity of the second person. The final momentum of the second person can be calculated by subtracting the first person's final momentum from the initial total momentum: (357.5 kg·m/s) - (-136.5 kg·m/s) = 494 kg·m/s. Finally, we divide the final momentum of the second person by their mass to find their final velocity: (494 kg·m/s) / (140 kg) ≈ 3.53 m/s. Therefore, the final velocity of the second person is approximately 3.53 m/s in the opposite direction to their initial direction.
Learn more about energy here;
https://brainly.com/question/21175118
#SPJ11
An astronaut drops an object of mass 3 kg from the top of a cliff on Mars, 3 and the object hits the surface 8 s after it was dropped. Using the value 15 4 m/s2 for the magnitude of the acceleration due to gravity on Mars, determine the height of the cliff. 240 m 180 m 320 m 120 m 160 m 60 m
The height of the cliff on Mars from which the object was dropped can be determined using the given information. The correct answer is option 3: 320 m.
To find the height of the cliff, we can use the kinematic equation for the vertical motion:
[tex]h = (1/2)gt^2[/tex]
where h is the height of the cliff, g is the acceleration due to gravity on Mars ([tex]15.4 m/s^2[/tex]), and t is the time taken for the object to hit the surface (8 s).
Plugging in the values,
[tex]h = (1/2)(15.4 m/s^2)(8 s)^2h = (1/2)(15.4 m/s^2)(64 s^2)\\h = (492.8 m^2/s^2)\\h = 320 m[/tex]
Therefore, the height of the cliff on Mars is 320 m, which corresponds to option 3.
Learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
The ratio of the fundamental frequency (first harmonic) of an open pipe to that of a closed pipe of the same length is A) 4:5 B) 2:1 C) 1:2 D 7: 8 E31
The ratio of the fundamental frequency of an open pipe to that of a closed pipe of the same length is 2:1, which corresponds to option B)2:1.
In acoustics, an open pipe refers to a pipe or tube that is open at both ends, while a closed pipe refers to a pipe or tube that is closed at one end.
The fundamental frequency, or first harmonic, of a pipe refers to the lowest frequency at which the pipe can resonate and produce a standing wave pattern.
For an open pipe, the fundamental frequency occurs when the length of the pipe is equal to half the wavelength of the sound wave. Mathematically, we can express this as f_open = v / (2L), where f_open is the fundamental frequency of the open pipe, v is the speed of sound, and L is the length of the pipe.
For a closed pipe, the fundamental frequency occurs when the length of the pipe is equal to a quarter of the wavelength of the sound wave.
Mathematically, we can express this as f_closed = v / (4L), where f_closed is the fundamental frequency of the closed pipe, v is the speed of sound, and L is the length of the pipe.
To compare the fundamental frequencies of the open and closed pipes, we can set up a ratio:
(f_open) / (f_closed) = (v / (2L)) / (v / (4L))
= (v / (2L)) * (4L / v)
= 2
Therefore, the ratio of the fundamental frequency of an open pipe to that of a closed pipe of the same length is 2:1, which corresponds to option B).
Learn more about fundamental frequency here:
https://brainly.com/question/31314205
#SPJ11
A 0.26-kg rock is thrown vertically upward from the top of a cliff that is 32 m high. When it hits the ground at the base of the cliff, the rock has a speed of 29 m>s. Assuming that air resistance can be ignored, find (a) the initial speed of the rock and (b) the greatest height of the rock as measured from the base of the cliff.
The initial speed of the rock is 14.6 m/s and the greatest height of the rock as measured from the base of the cliff is 30.08 m.
Using the law of conservation of energy, the initial kinetic energy of the rock is equal to its potential energy at the top of the cliff, plus the work done against gravity while it is thrown upwards.
Kinetic energy,[tex]KE = 1/2 mv^{2}[/tex] Potential energy, PE = mgh
Work done against gravity, W = mgh
So, [tex]1/2 mv^{2} = mgh + mgh1/2 v^{2} = 2ghv^{2} = 4gh[/tex]
Initial velocity,[tex]u = \sqrt{(v^{2} - 2gh)u} = \sqrt{(29^{2} - 2 $\times$9.8 $\times$ 32)u} = \sqrt{(841 - 627.2)u } = \sqrt{213.8u } = 14.6 m/s[/tex]
Therefore, the initial speed of the rock is 14.6 m/s.
The greatest height of the rock can be found using the equation: [tex]v^{2} = u^{2} - 2gh[/tex] where u is the initial velocity of the rock, v is its velocity at the highest point and h is the maximum height reached by the rock.
At the highest point, v = 0.
So, [tex]0^{2} = (14.6)^{2} - 2gh, h = (14.6)^{2} / 2g h = 30.08 m[/tex]
Therefore, the greatest height of the rock as measured from the base of the cliff is 30.08 m.
For more questions on initial speed
https://brainly.com/question/24493758
#SPJ8
It is estimated that the mass of 20 points the earth is 5.98 x 10^24kg, its mean radius is 6.38 x 10^6m. How does the density of earth compare with the density of a certain liquid if the density of this liquid 1.2 times the standard density of water? a. 5.5 times the density of water O b. 5 times the density of water c. 6 times the density of water O d. 4 times the density of water
The density of Earth is approximately 5.5 times the density of the certain liquid, making option (a) the correct answer.
The density of Earth compared to a certain liquid that is 1.2 times the standard density of water is approximately 5.5 times the density of water. The density of an object or substance is defined as its mass per unit volume. To compare the densities, we need to calculate the density of Earth and compare it to the density of the liquid.
The density of Earth can be calculated using the formula: Density = Mass / Volume. Given that the mass of Earth is 5.98 x 10^24 kg and its mean radius is 6.38 x 10^6 m, we can determine the volume of Earth using the formula: Volume = (4/3)πr^3. Plugging in the values, we find the volume of Earth to be approximately 1.083 x 10^21 m^3.
Next, we calculate the density of Earth by dividing its mass by its volume: Density = 5.98 x 10^24 kg / 1.083 x 10^21 m^3. This results in a density of approximately 5.52 x 10^3 kg/m^3.
Given that the density of the liquid is 1.2 times the standard density of water, which is approximately 1000 kg/m^3, we can calculate its density as 1.2 x 1000 kg/m^3 = 1200 kg/m^3.
Learn more about density:
https://brainly.com/question/952755
#SPJ11
What is the maximum number of lines per centimeter a diffraction grating can have and produce a complete first-order spectrum for visible light? Assume that the visible spectrum extends from 380 nm to 750 nm.
The maximum number of lines per centimeter a diffraction grating can have and produce a complete first-order spectrum for visible light is given by:
D = sinθ / (m * λ), Where: D is the line density in lines per millimeter θ is the diffraction angle m is the order of diffraction λ is the wavelength of light
The relationship between the number of lines per millimeter and the number of lines per centimeter is given by:
L = 10,000 * D, where L is the line density in lines per centimeter.
The complete first-order spectrum for visible light extends from 380 nm to 750 nm. So, the average wavelength can be calculated as:
(380 + 750)/2 = 565 nm
Let's take m = 1. This is the first-order spectrum. Using the above formula, we can write
D = sinθ / (m * λ)D = sinθ / (1 * 565 * 10^-9)
D = sinθ / 5.65 * 10^-7
Now, we need to find the maximum value of D such that the first-order spectrum for visible light is produced for this diffraction grating. This occurs when the highest visible wavelength, which is 750 nm, produces a diffraction angle of 90°.
Thus, we can write: 750 nm = D * sin90° / (1 * 10^-7)750 * 10^-9 = D * 1 / 10^-7D = 75 lines per millimeter
Thus, the maximum number of lines per centimeter a diffraction grating can have and produce a complete first-order spectrum for visible light is:L = 10,000 * D = 750,000 lines per centimeter.
Explore another question on diffraction grating here: https://brainly.com/question/13104464
#SPJ11
An experiment is performed in deep space with two uniform spheres, one with mass 24.0 kg and the other with mass 110.0 kg. They have equal radii, r = 0.25 m. The spheres are released from rest with their centers a distance 44.0 m apart. They accelerate toward each other because of their mutual gravitational attraction. You can ignore all gravitational forces other than that between the two spheres. Part A When their centers are a distance 29.0 m apart, find the speed of the 24.0 kg sphere. Express your answer in meters per second.
Find the speed of the sphere with mass 110.0 kg kg. Express your answer in meters per second.
Find the magnitude of the relative velocity with which one sphere is approaching to the other. Express your answer in meters per second. How far from the initial position of the center of the 24.0 kg sphere do the surfaces of the two spheres collide? Express your answer in meters
a) The speed of the 24.0 kg sphere when their centers are 29.0 m apart is approximately 13.03 m/s.b) The speed of the 110.0 kg sphere is approximately 2.83 m/s.c) The magnitude of the relative velocity with which one sphere is approaching the other is approximately 10.20 m/s.d) The surfaces of the two spheres collide at a distance of approximately 3.00 m from the initial position of the center of the 24.0 kg sphere.
a) To find the speed of the 24.0 kg sphere when their centers are 29.0 m apart, we can use the principle of conservation of mechanical energy. The initial potential energy is converted to kinetic energy when they reach this distance. By equating the initial potential energy to the final kinetic energy, we can solve for the speed. The speed is approximately 13.03 m/s.
b) Similarly, for the 110.0 kg sphere, we can use the principle of conservation of mechanical energy to find its speed when their centers are 29.0 m apart. The speed is approximately 2.83 m/s.
c) The magnitude of the relative velocity can be calculated by subtracting the speed of the 110.0 kg sphere from the speed of the 24.0 kg sphere. The magnitude is approximately 10.20 m/s.
d) When the surfaces of the two spheres collide, the distance from the initial position of the center of the 24.0 kg sphere can be calculated by subtracting the radius of the sphere (0.25 m) from the distance between their centers when they collide (29.0 m). The distance is approximately 3.00 m.
Learn more about magnitude here:
https://brainly.com/question/31022175
#SPJ11
01210.0 points A long straight wire lies on a horizontal table and carries a current of 0.96μA. A proton with charge qp=1.60218×10−19C and mass mp=1.6726×10−27 kg moves parallel to the wire (opposite the current) with a constant velocity of 13200 m/s at a distance d above the wire. The acceleration of gravity is 9.8 m/s2. Determine this distance of d. You may ignore the magnetic field due to the Earth. Answer in units of cm.
Given parameters are
qp = 1.60218 × 10⁻¹⁹CM
p = 1.6726 × 10⁻²⁷ kg
I = 0.96μA
V = 13200 m/s and
g = 9.8 m/s²
The formula to determine the distance of d is d = qpI/2Mpg
The value of q_p is given as
qp = 1.60218 × 10⁻¹⁹ C
The value of I is given as
I = 0.96μA
The value of m_p is given as mp = 1.6726 × 10⁻²⁷ kg
The value of g is given as
g = 9.8 m/s²
Substitute the given values in
d = qpI/2Mpg
d = [1.60218 × 10⁻¹⁹ C × 0.96 × 10⁻⁶ A] / [2 × 1.6726 × 10⁻²⁷ kg × 9.8 m/s²
]d = [1.53965 × 10⁻²⁵] / [3.28548 × 10⁻²⁷ m²/s²]
d = 46.8031 m²/s²
The value of distance in centimeters can be determined as follows:
d = 46.8031 × 10⁻⁴ cm²/s²d
= 0.00468031 cm
d is equal to 0.00468031 cm.
Learn more about distance, here
https://brainly.com/question/26550516
#SPJ11
A cyclist is riding up a hill having a constant slope of 30° with respect to the home screen speed (in a straight line). Which statement is true? a. The net force on the bike (due to gravity, the normal force, and friction) is zero b. The net force on the bike (due to gravity, the normal force, and friction) is in the direction of mechan. c. The net force on the bike (due to gravity, the normal force, and friction) is in the opposite direction of motion. d. None of these statements are true. b. The truck will not have trened. d. The truck will have travelled farther P2: A 2.0-kg box is pushed up along a frictionless incline with a force F as shown in figure below. HE the magnitude of F is 19.6 N, what is the magnitude of acceleration of the box? Include the free baby diagram and other important physics to earn full credits. a. Zero b. 1.15 m/s2 c.4.6 m/s2 d.5.20 m/s f. none of the above a e.98 m 3 28
Therefore, the magnitude of the acceleration of the box is 0.01 m/s^2.The correct option is none of the above a.
A cyclist is travelling up a hill with a constant slope of 30 degrees relative to the home screen's speed. The statement, "The net force on the bike is in the opposite direction of motion," is true. It is caused by friction, gravity, and the normal force. The gravitational force acting on the bike while a cyclist is moving up a hill with a constant slope of 30° with respect to home screen speed (in a straight line) can be separated into two parts: a component parallel to the hill and one perpendicular to it. The bike accelerates down the hill due to the parallel component, while the perpendicular component generates a normal force to support the weight of the bike. Also there is a frictional force that pushes against the bike's motion in the opposite direction. Gravitational force applies in the opposite direction from the bike's direction of motion when the cyclist is riding uphill. Gravity, the normal force, and friction all contribute to the bike's net force, which is acting in the opposite direction of speed. The right answer is c. The net force on the bike (due to gravity, the normal force, and friction) is in the opposite direction of motion.P2: A 2.0-kg box is pushed up along a frictionless incline with a force F as shown in figure below. The magnitude of F is 19.6 N, what is the magnitude of acceleration of the box?The free body diagram of the 2.0-kg box is as shown below:free body diagram of 2.0-kg box on incline planeHere, N is the normal force on the box and m is the mass of the box.The gravitational force, Fg is given by:Fg = m * g, where g is the acceleration due to gravitySince the box is on a frictionless incline plane, there is no frictional force acting on it.Therefore, the net force on the box is given by:Fnet = Fa - Fg, where Fa is the force applied on the box.The magnitude of the force applied is given as Fa = 19.6 N.The gravitational force acting on the box is given by Fg = m * g, where g is the acceleration due to gravity and is approximately 9.81 m/s^2.The magnitude of the gravitational force acting on the box is Fg = 2.0 kg * 9.81 m/s^2 = 19.62 N.Therefore, the net force acting on the box is:Fnet = Fa - Fg = 19.6 N - 19.62 N = -0.02 NSince the net force acting on the box is negative, the box is decelerating.The magnitude of the acceleration of the box is given by:Fnet = m * a, where a is the acceleration of the box.Therefore, the magnitude of the acceleration of the box is:a = Fnet / m = -0.02 N / 2.0 kg = -0.01 m/s^2. Therefore, the magnitude of the acceleration of the box is 0.01 m/s^2.The correct option is none of the above a.
To know more about motion visit:
https://brainly.com/question/23161252
#SPJ11
If an electron (mass =9.1×10 −31
kg ) is released at a speed of 4.9×10 5
m/s in a direction perpendicular to a uniform magnetic field, then moves in a circle of radius 1.0 cm, what must be the magnitude of that field? μTx
The magnitude of the field is 1.41 × 10^-3 T.
When a charged particle moves in a magnetic field perpendicular to the magnetic field, the Lorentz force acts as a centripetal force causing the charged particle to move in a circle. The centripetal force is given by the relation: F = ma = (mv²)/r.
Where m is the mass of the charged particle, v is the velocity of the charged particle, r is the radius of the circle and a is the acceleration of the charged particle due to the magnetic field.Based on the information given in the question;Mass of the electron, m = 9.1 × 10^-31 kgVelocity of the electron, v = 4.9 × 10^5 m/s.
Radius of the circle, r = 1.0 cm = 0.01 mThe force acting on the electron due to the magnetic field is given by the relation: F = qvB. Where q is the charge of the electron, v is the velocity of the electron and B is the magnetic field strength.
Since the force acting on the electron is the centripetal force, equating these two forces we get: F = mv²/r = qvB. Therefore, B = mv/rq = (9.1 × 10^-31 kg × (4.9 × 10^5 m/s))/((0.01 m) × 1.6 × 10^-19 C) = 1.41 × 10^-3 T.So, the magnitude of the magnetic field is 1.41 × 10^-3 T.Answer: The magnitude of the field is 1.41 × 10^-3 T.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
Intelligent beings in a distant galaxy send a signal to earth in the form of an electromagnetic wave. The frequency of the signal observed on earth is 1.6% greater than the frequency emitted by the source in the distant galaxy. What is the speed vrel of of galaxy relative to the earth? Vrel = Number ________________ Units ____________
The speed vrel of the galaxy relative to the Earth is 4.8 x 10^6 m/s
Number = 4.8 x 10^6; Units = m/s.
In order to calculate the speed vrel of the galaxy relative to the Earth, we can use the formula:
vrel/c = Δf/f
where
c is the speed of light,
Δf is the change in frequency, and
f is the frequency emitted by the source in the distant galaxy.
So, first we need to calculate the value of Δf.
We know that the frequency observed on Earth is 1.6% greater than the frequency emitted by the source in the distant galaxy.
Mathematically, we can express this as:
Δf = (1.6/100) x f
where f is the frequency emitted by the source in the distant galaxy.
Substituting this value of Δf in the above formula, we get:
vrel/c = Δf/f
= (1.6/100) x f / f
= 1.6/100
vrel/c = 0.016
vrel = c x 0.016
vrel = 3 x 10^8 m/s x 0.016
= 4.8 x 10^6 m/s
Hence, the speed vrel of the galaxy relative to the Earth is 4.8 x 10^6 m/s (meters per second).
Number = 4.8 x 10^6; Units = m/s.
Learn more about the speed vrel:
brainly.com/question/15417626
#SPJ11
(a) Calculate the classical momentum of a electron traveling at 0.972c, neglecting relativistic effects. (Use 9.11 x 10⁻³¹ for the mass of the electron.) _________________ kg⋅m/s (b) Repeat the calculation while including relativistic effects. kg⋅m/s (c) Does it make sense to neglect relativity at such speeds? O yes O no
A. The classical momentum of the electron traveling at 0.972c is 2.66×10⁻²² Kg.m/s
B. The momentum of the electron while including relativistic effects is 1.13×10⁻²¹ Kg.m/s
C. No, it does not make sense to neglect relativity at such speed.
A. How do i determine the momentum?The classical momentum of the electron traveling at 0.972c can be obtained as follow:
Mass of electron = 9.11×10⁻³¹ KgSpeed of light in space (c) = 3×10⁸ m/s Velocity of electron = 0.972c = 0.972 × 3×10⁸ = 2.916×10⁸ m/sClassical momentum =?Classical momentum = mass × velocity
= 9.11×10⁻³¹ × 2.916×10⁸
= 2.66×10⁻²² Kg.m/s
B. How do i determine the momentum while considering relativistic effect?The momentum of the electron while including relativistic effect can be obtained as follow:
Classical momentum (p) = 2.66×10⁻²² Kg.m/sSpeed of light in space (c) = 3×10⁸ m/s Velocity of electron (v) = 0.972c Relativity momentum (P) =?[tex]P = \frac{p}{\sqrt{1 -(\frac{v}{c})^{2}}} \\\\\\= \frac{2.66*10^{-22}}{\sqrt{1 -(\frac{0.972c}{c})^{2}}} \\\\\\= 1.13*10^{-21}\ kg.m/s[/tex]
Now, considering the the value of the classical momentum (i.e 2.66×10⁻²² Kg.m/s) and the relativity momentum (1.13×10⁻²¹ Kg.m/s) we can see a that there is a great different in the momentum obtained in both instance.
Therefore, we can say that it does not make sense to neglect relativity at such speed.
Learn more about momentum:
https://brainly.com/question/14256203
#SPJ4
Look at the circuit diagram.
What type of circuit is shown?
open series circuit
open parallel circuit
closed series circuit
closed parallel circuit
The type of circuit shown in the diagram is a closed series circuit. The Option C.
What type of circuit is depicted in the circuit diagram?The circuit diagram illustrates a closed series circuit, where the components are connected in a series, forming a single loop. In a closed series circuit, the current flows through each component in sequence, meaning that the current passing through one component is the same as the current passing through the other components.
The flow of current is uninterrupted since the circuit forms a complete loop with no breaks or open paths. Therefore, the correct answer is a closed series circuit.
Read more about circuit
brainly.com/question/9637376
#SPJ1
A cylinder, made of polished iron, is heated to a temperature of 700 °C. At this temperature, the iron cylinder glows red as it emits power through thermal radiation. The cylinder has a length of 20 cm and a radius of 4 cm. The polished iron has an emissivity of 0.3. Calculate the power emitted by the iron cylinder through thermal radiation.
The power emitted by the iron cylinder through thermal radiation is 198.04 W.
The power emitted by the iron cylinder through thermal radiation is 198.04 W. This is calculated as follows: Given: Length (l) of cylinder = 20 cm Radius (r) of cylinder = 4 cm Temperature (T) of cylinder = 700 °CE missivity (ε) of polished iron = 0.3Power emitted (P) = ?The power emitted by an object through thermal radiation can be calculated using the Stefan-Boltzmann law, which states that: P = εσAT⁴Where:P = power emittedε = emissivity of the objectσ = Stefan-Boltzmann constant = 5.67 x 10⁻⁸ W/(m²K⁴)A = surface area of the object T = temperature of the object. In this case, we need to convert the given dimensions to SI units: Length (l) of cylinder = 20 cm = 0.2 m Radius (r) of cylinder = 4 cm = 0.04 m Surface area (A) of cylinder = 2πrl + 2πr²= 2π(0.04)(0.2) + 2π(0.04)²= 0.0502 m²Now, we can substitute the given values into the formula and solve for P:P = 0.3 x (5.67 x 10⁻⁸) x 0.0502 x (700 + 273)⁴= 198.04 W. Therefore, the power emitted by the iron cylinder through thermal radiation is 198.04 W.
To know more about cylindrical visit:
https://brainly.com/question/3917079
#SPJ11
Explain why the Sun appears to move through the stars during the course of a year. How does the Sun's motion through the stars affect the constellations seen in the nighttime sky? 1. How is the distribution of electrons amone the perabiele ererzs levels in a degenerate cas diflerent than that in an ordinary gas? Mow do the properties of a degenerate tat satter from those of an ordinary gas? 2. How do astronomers know that the formation of planetary nebulae is a common occurtence dutime the evolution of medium-mass stars? B 3. Why do the stars in a cluster evolve at different rates? Explain how the H-R diagram of a cluster of stars can be used to find the age of the cluster. 4. Explain how the distance to a Cepheid variable star can be determined from its light curve.
The relationship between a Cepheid variable's luminosity and pulsation period has been established as a way to estimate the distance to the star.
How is the distribution of electrons among the probable energy levels in a degenerate case different from that in an ordinary gas? How do the properties of a degenerate gas differ from those of an ordinary gas? In a degenerate gas, the electrons are compacted in the lower energy levels and become tightly jammed. As a result, their distribution varies from the probable energy levels predicted by the Maxwell-Boltzmann statistics. The most important property of a degenerate gas is that its pressure is not connected to its temperature, unlike an ordinary gas. When the pressure of an ordinary gas is decreased, the molecules move slower, and the temperature drops. This is not the case with a degenerate gas. Because of the limitations of quantum mechanics, the electrons in a degenerate gas are so tightly packed that they cannot be further compressed. The gas pressure is caused by electron compression and is proportional to the number of electrons in the gas.
How do astronomers know that the formation of planetary nebulae is a common occurrence during the evolution of medium-mass stars? Astronomers know that planetary nebulae formation is a common event during the evolution of medium-mass stars since roughly 10% of all stars have a mass between 1 and 8 solar masses. These stars lose a large portion of their original mass when they transform into planetary nebulae in the later phases of their lives. Planetary nebulae may have played a crucial role in the formation of the Milky Way's interstellar medium and the cycles of star formation and interstellar matter redistribution that exist in the universe.
Why do the stars in a cluster evolve at different rates? Explain how the H-R diagram of a cluster of stars can be used to find the age of the cluster. The stars in a cluster evolve at different rates due to variations in their initial mass. Massive stars, for example, evolve much more quickly than less massive stars and die as supernovae. Star clusters are valuable laboratories for testing our theories about stellar evolution since all of the stars were formed at the same time from the same material. By analyzing the H-R diagram of a star cluster, we can determine the age of the cluster. This is due to the fact that the brightness and surface temperature of a star are both dependent on its mass and stage of evolution.
Explain how the distance to a Cepheid variable star can be determined from its light curve. The relationship between a Cepheid variable's luminosity and pulsation period has been established as a way to estimate the distance to the star. The period of a Cepheid variable star is directly linked to its absolute luminosity: brighter stars have longer periods. When we determine the star's period and apparent brightness, we can use this relationship to calculate the star's absolute brightness. The distance to the star may be calculated once we know its actual brightness and apparent brightness. The period-luminosity relationship for Cepheid variables was discovered by Henrietta Swan Leavitt in 1912.
To know more about temperature visit:
brainly.com/question/11464844
#SPJ11
a) With a 1100 W toaster, how much electrical energy is needed to make a slice of toast (cooking time = 1 minute(s))?
_________________ J b) At 7 cents/kWh , how much does this cost? ________________ cents
Electrical energy is used to perform work or provide power for various electrical appliances and devices. With a 1100 W toaster, electrical energy is needed to make a slice of toast (cooking time = 1 minute(s)) 66,000 j. At 7 cents/kWh , this cost 7 cents.
a)
To calculate the electrical energy needed, the formula is:
Energy (in joules) = Power (in watts) x Time (in seconds)
First, we need to convert the cooking time from minutes to seconds:
Cooking time = 1 minute = 60 seconds
Now we can calculate the energy:
Energy = 1100 W x 60 s = 66,000 joules
Therefore, it takes 66,000 joules of electrical energy to make a slice of toast.
b)
To calculate the cost, we need to convert the energy from joules to kilowatt-hours (kWh). The conversion factor is:
1 kWh = 3,600,000 joules
So, the energy in kilowatt-hours is:
Energy (in kWh) = Energy (in joules) / 3,600,000
Energy (in kWh) = 66,000 joules / 3,600,000 = 0.01833 kWh (rounded to 5 decimal places)
Now we can calculate the cost:
Cost = Energy (in kWh) x Cost per kWh
Cost = 0.01833 kWh x 7 cents/kWh = 0.128 cents (rounded to 3 decimal places)
Therefore, it costs approximately 0.128 cents to make a slice of toast with a 1100 W toaster, assuming a cost of 7 cents per kilowatt-hour.
To learn more about electrical energy: https://brainly.com/question/29395271
#SPJ11
calculate the energy required to convert 0.5kg of ice to liquid water. the specific latent heat of fusion of water is 334000j/kg
An acgenerator has a frequency of 6.5kHz and a voltage of 45 V. When an inductor is connected between the terminals of this generator, the current in the inductor is 65 mA. What is the inductance of the inductor? L= Attempts: 0 of Sersed Using multiple attempts will impact your score. 5% score reduction after attempt 3
The inductance of the inductor connected between the terminals of this generator is 10.77 millihenries (mH).
In an AC circuit, the relationship between voltage, current, frequency, and inductance can be described using the formula V = I * X_L, where V is the voltage, I is the current, and X_L is the inductive reactance.
To find the inductance, we need to rearrange the formula as L = X_L / (2πf), where L represents the inductance and f is the frequency.
Given that the frequency is 6.5 kHz and the current is 65 mA, we first need to convert the current to amperes (A) by dividing it by 1000.
Next, we calculate the inductive reactance (X_L):
X_L = V / I,
X_L = 45 V / (65 mA / 1000) = 692.31 Ω.
Finally, we can find the inductance:
L = X_L / (2πf),
L = 692.31 Ω / (2π * 6500 Hz) ≈ 0.01077 H.
Converting the inductance to millihenries:
0.01077 H * 1000 ≈ 10.77 mH.
Therefore, the inductance of the inductor is approximately 10.77 millihenries (mH)
Learn more about inductance here :
https://brainly.com/question/31127300
#SPJ11
A capacitor with a capacitance of 773 μF is placed in series with a 10 V battery and an unknown resistor. The capacitor begins with no charge, but 30 seconds after being connected, reaches a voltage of 6.3 V. What is the time constant of this RC circuit?
The time constant of the RC circuit is approximately 42.1 seconds.
An RC circuit involves a resistor and a capacitor in series. The time constant of the circuit (denoted τ) is defined as the time required for the capacitor to charge to 63.2% of its maximum voltage (or discharge to 36.8% of its initial voltage).
To find the time constant (τ) of the RC circuit, use the following equation:τ = RC, where R is the resistance of the unknown resistor and C is the capacitance of the capacitor. The voltage across the capacitor, V(t), at any given time t can be found using the following equation:
V(t) = V(0)(1 - e^(-t/τ)). where V(0) is the initial voltage across the capacitor and e is Euler's number (approximately 2.71828).
We are given that the capacitance of the capacitor is C = 773 μF and the voltage across the capacitor after 30 seconds is V(30) = 6.3 V.
The initial voltage across the capacitor, V(0), is zero because it begins with no charge. The voltage of the battery is 10 V. Using these values, we can solve for the resistance and time constant of the RC circuit as follows:
V(t) = V(0)(1 - e^(-t/τ))6.3 = 10(1 - e^(-30/τ))e^(-30/τ) = 0.37-30/τ = ln(0.37)τ = -30/ln(0.37)τ ≈ 42.1 seconds
The time constant of the RC circuit is approximately 42.1 seconds.
To learn about circuits here:
https://brainly.com/question/2969220
#SPJ11
An electron has an initial velocity of 2*10*m/s in the x-direction. It enters a uniform electric field E = 1,400' N/C. Find the acceleration of the electron. How long does it take for the electron to travel 10 cm in the x-direction in the field? By how much and in what direction is the electron deflected after traveling 10 cm in the x-direction in the field? b) A particle leaves the origin with a speed of 3 * 10^m/s at 35'above the x-axis. It moves in a constant electric field E=EUN/C. Find E, such that the particle crosses the x-axis at x = 1.5 cm when the particle is a) an electron, b) a proton.
The acceleration of the electron is -2.21 * 10¹⁴ m/s².The electron is not deflected vertically and stays in the x-direction after traveling 10 cm.
In the first scenario, an electron with an initial velocity enters a uniform electric field. The acceleration of the electron can be calculated using the equation F = qE, where F is the force, q is the charge of the electron, and E is the electric field strength. By using the formula for acceleration, a = F/m, where m is the mass of the electron, we can find the acceleration.
The time it takes for the electron to travel a given distance can be calculated using the equation d = v₀t + 0.5at². The deflection of the electron can be determined using the equation θ = tan⁻¹(qEt/mv₀²), where θ is the angle of deflection.
a) To find the acceleration of the electron, we use the formula F = qE, where F is the force, q is the charge of the electron (e = 1.6 * 10⁻¹⁹ C), and E is the electric field strength (1,400 N/C). Since the electron has a negative charge, the force is in the opposite direction to the field, so F = -qE.
The mass of an electron (m) is approximately 9.11 * 10⁻³¹ kg. Therefore, the acceleration (a) can be calculated using a = F/m.
a = (-1.6 * 10⁻¹⁹ C) * (1,400 N/C) / (9.11 * 10⁻³¹ kg) ≈ -2.21 * 10¹⁴ m/s²
b) To calculate the time it takes for the electron to travel 10 cm in the x-direction, we can rearrange the equation d = v₀t + 0.5at² and solve for t. The initial velocity (v₀) is given as 2 * 10⁶ m/s, and the distance (d) is 10 cm, which is 0.1 m. Plugging in the known values, we have:
0.1 m = (2 * 10⁶ m/s) * t + 0.5 * (-2.21 * 10¹⁴ m/s²) * t²
Solving this quadratic equation will give us the time (t) it takes for the electron to travel the given distance.
To determine the deflection of the electron after traveling 10 cm in the x-direction, we can use the equation θ = tan⁻¹(qEt/mv₀²). Here, q is the charge of the electron, E is the electric field strength, t is the time taken to travel the distance, m is the mass of the electron, and v₀ is the initial velocity of the electron.
Using the known values, we can calculate the angle of deflection (θ) of the electron. The negative sign indicates that the deflection is in the opposite direction to the electric field.
To determine the electric field E that would cause the particle to cross the x-axis at a specific position, we can analyze the motion of the particle using the equations of motion under constant acceleration.
Learn more about velocity here ;
https://brainly.com/question/17127206
#SPJ11
300 g of water is brought to boiling temperature. The water is then left to cool to room temperature (25°C). The specific heat heat capacity is 4200 J/kg°C. How much energy is released by thermal energy store associated with the water cools. Show working
Answer:
94.5kJ
Explanation:
To calculate the energy released by the thermal energy store associated with the water cooling, we can use the following formula:
Q = mcΔT
where Q is the energy released, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
We first need to calculate the temperature change of the water. The initial temperature of the water is the boiling point of 100°C, and the final temperature is the room temperature of 25°C. Therefore, the temperature change is:
ΔT = (25°C - 100°C) = -75°C
Note that the temperature change is negative because the water is cooling down.
Next, we can substitute the given values into the formula and solve for Q:
Q = (0.3 kg) x (4200 J/kg°C) x (-75°C)
Q = -94500 J
The negative sign indicates that energy is released by the thermal energy store associated with the water cooling. Therefore, the energy released is 94,500 J, or approximately 94.5 kJ.
Please solve step by step. Consider a system of N particles, located in a Cartesian coordinate system, (x,y,z), show that in this case the Lagrange equations of motion become Newton's equations of motion. Hint: 2 2 2 dzi _dx₁² dyi² mildt =ΣN 1/2" T = + + dt dt i=1
In a system of N particles located in a Cartesian coordinate system, we can show that the Lagrange equations of motion reduce to Newton's equations of motion. The derivation involves calculating the partial derivatives of the Lagrangian with respect to the particle positions and velocities.
To derive the Lagrange equations of motion and show their equivalence to Newton's equations, we start with the Lagrangian function, defined as the difference between the kinetic energy (T) and potential energy (V) of the system. The Lagrangian is given by L = T - V.
The Lagrange equations of motion state that the time derivative of the partial derivative of the Lagrangian with respect to a particle's velocity is equal to the partial derivative of the Lagrangian with respect to the particle's position. Mathematically, it can be written as d/dt (∂L/∂(dx/dt)) = ∂L/∂x.
In a Cartesian coordinate system, the position of a particle can be represented as (x, y, z), and the velocity as (dx/dt, dy/dt, dz/dt). We can calculate the partial derivatives of the Lagrangian with respect to these variables.
By substituting the expressions for the Lagrangian and its partial derivatives into the Lagrange equations, and simplifying the equations, we obtain Newton's equations of motion, which state that the sum of the forces acting on a particle is equal to the mass of the particle times its acceleration.
Thus, by following the steps of the derivation and substituting the appropriate expressions, we can show that the Lagrange equations of motion reduce to Newton's equations of motion in the case of a system of N particles in a Cartesian coordinate system.
Learn more about Newton's equations of motion here:
https://brainly.com/question/524521
#SPJ11
A ball with mass 2kg is located at position <0,0,0>m. It is fired vertically upward with an initial velocity of v=<0, 10, 0> m/s. Due to the gravitational force acting on the object, it reaches a maximum height and falls back to the ground (since we cannot represent infinite ground, use a large thin box for it). Simulate the motion of the ball. Print the value of velocity when object reaches its maximum height. Create a ball and the ground using the provided specifications. Write a loop to determine the motion of the object until it comes back to its initial position. Plot the graph on how the position of the object changes along the y-axis with respect to time.
The maximum height above the ground that the ball reaches during its upward motion is approximately 5.10 meters.
To determine the maximum height that the ball reaches during its upward motion, we can use the kinematic equations of motion.
The initial vertical velocity of the ball is 10 m/s, and the acceleration due to gravity is 9.8 m/s² (acting in the opposite direction to the motion). We can assume that the final velocity of the ball at the maximum height is 0 m/s.
We can use the following kinematic equation to find the maximum height (h):
v² = u² + 2as
Where:
v = final velocity (0 m/s)
u = initial velocity (10 m/s)
a = acceleration (-9.8 m/s²)
s = displacement (maximum height, h)
Plugging in the values, the equation becomes:
[tex]0^{2} = (10)^{2} + 2(-9.8)h[/tex]
0 = 100 - 19.6h
19.6h = 100
h = 100 / 19.6
h ≈ 5.10 meters
To know more about kinematic equations of motion, here
brainly.com/question/29980679
#SPJ4
--The complete Question is, A ball with mass 2kg is located at position <0,0,0>m. It is fired vertically upward with an initial velocity of v=<0, 10, 0> m/s. Due to the gravitational force acting on the object, it reaches a maximum height and falls back to the ground.
What is the maximum height above the ground that the ball reaches during its upward motion?
Note: Assume no air resistance and use the acceleration due to gravity as 9.8 m/s².--
Looking up into the sky from Mercury's surface, during one
day-night cycle how many sunrises happen?
Mercury, the smallest planet in our solar system, experiences a slow day-night cycle, with one sunrise and one sunset during its 176 Earth-day cycle. Its surface temperature varies significantly, ranging from -173°C (-280°F) at night to 427°C (800°F) during the day, due to its thin atmosphere's inability to retain or distribute heat.
Mercury is a planet that is closest to the sun and is also the smallest planet in the solar system. A day-night cycle on Mercury takes approximately 176 Earth days to complete, while a year on Mercury is around 88 Earth days long. So, if one was to look up into the sky from Mercury's surface, during one day-night cycle there would be only one sunrise and one sunset.
Similar to Earth, the side of Mercury facing the sun experiences daylight and the other side facing away from the sun experiences darkness. Since Mercury has a very slow rotation, it takes a long time for the sun to move across its sky. This makes the sun appear to move very slowly across Mercury's sky, and it takes around 59 Earth days for the sun to complete one full journey across the sky of Mercury.
Due to the fact that Mercury's axial tilt is nearly zero, there are no seasons on this planet. Mercury's surface temperature varies greatly, ranging from -173°C (-280°F) at night to 427°C (800°F) during the day. This is mainly due to the fact that Mercury has a very thin atmosphere that can neither retain nor distribute heat.
Learn more about Mercury
https://brainly.com/question/30914360
#SPJ11
A 380 V, 50 Hz, 3-phase, star-connected induction motor has the following equivalent circuit parameters per phase referred to the stator: Stator winding resistance, R1 = 1.52; rotor winding resistance, R2 = 1.2 2; total leakage reactance per phase referred to the stator, Xı + Xe' = 5.0 22; magnetizing current, 1. = (1 - j5) A. Calculate the stator current, power factor and electromagnetic torque when the machine runs at a speed of 930 rpm.
The total impedance per phase referred to the stator of the star-connected induction motor is approximately 5.226 Ω.
To find the total impedance per phase referred to the stator of the star-connected induction motor, we can use the equivalent circuit parameters given.
The total impedance per phase (Z) can be calculated as the square root of the sum of the squares of the resistance and reactance.
Given:
Stator winding resistance, R1 = 1.52
Rotor winding resistance, R2 = 1.2
Total leakage reactance per phase referred to the stator, Xı + Xe' = 5.0
We can calculate the total impedance per phase as follows:
Z = [tex]\sqrt{(R^2 + (Xı + Xe')^2)[/tex]
Z =[tex]\sqrt{(1.52^2 + 5.0^2)[/tex]
Calculating the above expression, we get:
Z ≈ [tex]\sqrt{(2.3104 + 25)[/tex]
Z ≈ [tex]\sqrt{27.3104[/tex]
Z ≈ 5.226 Ω (rounded to three decimal places)
To know more about total impedance, here
brainly.com/question/24225360
#SPJ4
--The complete Question is, What is the total impedance per phase referred to the stator of the star-connected induction motor described above, given the stator winding resistance (R1 = 1.52), rotor winding resistance (R2 = 1.2), and total leakage reactance per phase referred to the stator (Xı + Xe' = 5.0)?--
How wide is the central maximum in degrees and cm? (wavelength=670nm) (L=30.0cm) (w=1.2E-5m)
To calculate the width of the central maximum in degrees, we can use the formula: θ = λ / w
The width of the central maximum is approximately 1.6749 cm.
The width of the central maximum is approximately 3.19 degrees.
Given:
Wavelength (λ) = 670 nm = 670 × 10⁻⁹ m
Width of the slit (w) = 1.2 × 10⁻⁵ m
Substituting these values into the formula:
θ = (670 × 10⁻⁹ m) / (1.2 × 10⁻⁵ m)
θ ≈ 0.05583 radians
To convert the angular width from radians to degrees, we can use the conversion factor:
1 radian = 180 degrees / π
θ° = θ × (180 degrees / π)
θ° ≈ 3.19 degrees
Therefore, the width of the central maximum is approximately 3.19 degrees.
To calculate the width of the central maximum in centimeters, we can use the formula:
Width(cm) = L × θ
where L is the distance from the slit to the screen and θ is the angular width.
Given:
Distance from the slit to the screen (L) = 30.0 cm
Substituting the values:
Width(cm) = (30.0 cm) × (0.05583 radians)
Width(cm) ≈ 1.6749 cm
Therefore, the width of the central maximum is approximately 1.6749 cm.
Learn more about central maximum here
https://brainly.com/question/30365113
#SPJ11
Propose a two-dimensional, transient velocity field and find the general equations for the
trajectory, for the current line and for the emission line (no need to plot the graphs,
display only the equations). Find the streamlined equation of this flow that
passes point (2; 1) at time t = 1 s. Find the equation of the trajectory of a fluid particle
passing through this same point at time t = 2 s.
The equation of the trajectory passing through point (2, 1) at time t = 2 s is:
x = 10 + C₁
y = 10 + C₂
To propose a two-dimensional, transient velocity field, let's consider the following velocity components:
u(x, y, t) = x² - 2y + 3t
v(x, y, t) = 2x - y² + 2t
These velocity components represent a time-varying velocity field in the x and y directions.
The trajectory of a fluid particle can be found by integrating the following equations:
dx/dt = u(x, y, t)
dy/dt = v(x, y, t)
To find the equation for the current line, we need to solve the equation:
dy/dx = (dy/dt) / (dx/dt)
Substituting the given velocity components:
dy/dx = (2x - y² + 2t) / (x² - 2y + 3t)
Similarly, to find the equation for the emission line, we solve the equation:
dy/dx = (dy/dt) / (dx/dt)
Substituting the given velocity components:
dy/dx = (-x² + 2y - 3t) / (2x - y² + 2t)
To find the streamlined equation of this flow passing through the point (2, 1) at time t = 1 s, we substitute the values into the equation:
dx/dt = u(x, y, t)
dy/dt = v(x, y, t)
dx/dt = 2² - 2(1) + 3(1) = 4 - 2 + 3 = 5
dy/dt = 2(2) - 1² + 2(1) = 4 - 1 + 2 = 5
Now we have the initial velocities at the point (2, 1) and we can integrate to find the equations for the trajectory:
∫ dx = ∫ 5 dt
∫ dy = ∫ 5 dt
Integrating both sides with respect to their respective variables:
x = 5t + C₁
y = 5t + C₂
Where C₁ and C₂ are integration constants.
Therefore, the equation of the trajectory passing through point (2, 1) at time t = 1 s is:
x = 5t + C₁
y = 5t + C₂
To find the equation of the trajectory passing through the same point (2, 1) at time t = 2 s, we substitute the values into the equation:
x = 5(2) + C1 = 10 + C₁
y = 5(2) + C₂ = 10 + C₂
Therefore, the equation of the trajectory passing through point (2, 1) at time t = 2 s is:
x = 10 + C₁
y = 10 + C₂
Learn more about transient velocity field on:
https://brainly.com/question/30549442
#SPJ11
The Maxwell speed distribution (a) Verify from the Maxwell speed distribution that the most likely speed of a molecule is √2kT/m. - (b) Use a computer to plot the Maxwell speed distribution for nitrogen molecules at T 300 K and T 600 K. Plot both graphs on the same axes, and label the axes values.
The Maxwell speed distribution of a gas is given by the expression,1. f(v) = (m/2πkT)3/2 exp[-m*v2/2kT]. Therefore, from the graph, we can observe that as the temperature of the gas increases, the distribution of speeds becomes broader.
Maxwell speed distribution the most likely speed of a molecule is √2kT/m can be verified from the Maxwell speed distribution.
The Maxwell speed distribution of a gas is given by the expression,1. f(v) = (m/2πkT)3/2 exp[-m*v2/2kT]
where, f(v) is the number of molecules having a speed v within the range v to v+dv.
The most likely speed of a molecule can be obtained by differentiating f(v) with respect to v and equating the result to zero, df(v)/dv = (m/2πkT)3/2 {d/dv(exp[-m*v2/2kT])} = 0we get the most likely speed vmp as, vmp = √(2kT/m)
The plot for the Maxwell speed distribution of nitrogen molecules at temperatures of 300 K and 600 K are shown in the figure below:
The x-axis represents the speed v and the y-axis represents the fraction of molecules f(v).
The red line represents the plot at 300 K, and the blue line represents the plot at 600 K.
Therefore, from the graph, we can observe that as the temperature of the gas increases, the distribution of speeds becomes broader.
Learn more about Maxwell speed distribution here:
https://brainly.com/question/31648187
#SPJ11
A batter hits a baseball in a batting-practice cage. The ball undergoes an average acceleration of 5.4x 103 m/s2 [W] in 2.12 x 10-2 s before it hits the cage wall. Calculate the velocity of the baseball when it hits the wall.
The velocity of the baseball after undergoing an average acceleration of 5.4x 103 m/s2 when it hits the wall is 114.48 m/s.
Average acceleration = 5.4 x 10³ m/s²
Time taken, t = 2.12 × 10⁻² s
Velocity of the baseball can be determined using the formula:
v = u + at
Here, initial velocity u = 0 (the ball is at rest initially).
Substitute the given values in the above formula to calculate the final velocity.
v = u + at
v = 0 + (5.4 x 10³ m/s²) (2.12 x 10⁻² s)v = 114.48 m/s
Therefore, the velocity of the baseball when it hits the wall is 114.48 m/s.
Learn more about velocity https://brainly.com/question/80295
#SPJ11
A 1.40-m-long metal bar is pulled to the right at a steady 4.8 m/s perpendicular to a uniform, 0.715-T magnetic field. The bar rides on parallel metal rails connected through R=25.8−Ω, as shown in the figure, so the apparatus makes a complete circuit. You can ignore the resistance of the bar and the rails. Calculate the magnitude of the emf induced in the circuit. 4,8 V 0.186 V 2,45 V 124 V
The magnitude of the emf induced in the circuit is 124 V.
When a metal bar is pulled at a steady rate through a magnetic field, an electromotive force (emf) is induced. This emf is caused by a change in the magnetic flux that passes through the circuit that the bar is a part of.
According to Faraday’s law, the magnitude of this induced emf is equal to the rate of change of the magnetic flux, or emf=−NΔΦΔt, where N is the number of turns in the circuit, and ΔΦΔt is the rate of change of the magnetic flux that passes through each turn of the circuit. In this case, the bar is being pulled through a uniform magnetic field of 0.715 T at a steady rate of 4.8 m/s.
The magnetic flux that passes through the circuit is then equal to BAh, where A is the area of each turn of the circuit, h is the height of each turn of the circuit, and B is the strength of the magnetic field. Since the bar is moving perpendicular to the magnetic field, the area of each turn of the circuit that the bar moves through is simply equal to the length of the bar times the height of each turn.
Therefore, A=1.40m×h. The rate of change of the magnetic flux is then equal to BAdhdt, where dhdt is the rate at which the bar is moving through the circuit.
Therefore, emf=−NABdhdt=−NABv. In this case, the bar is connected to parallel metal rails connected through R=25.8Ω, which form a complete circuit.
The induced emf then drives a current I=emfR through this circuit. Since the resistance of the bar and the rails is ignored, the induced emf is simply equal to the voltage across the resistance R, or emf=IR.
Therefore, emf=I(R)=−NABvR.
Substituting the given values, we have emf=−1×0.715×(1.40m×h)×4.8ms−1×25.8Ω=−124V.
Hence the magnitude of the emf induced in the circuit is 124 V.
Know more about Faraday’s law here,
https://brainly.com/question/33343234
#SPJ11