sin2x=

please help!!

On adding the measurement of "4-boards", the total length of the 'four-boards" is  154 inches.

In order to add the lengths of these four boards, we first need to convert all the measurements to the same units.

So, Let us convert all the measurements to inches:

(i) 3 feet 4 inches = (3×12) + 4 = 40 inches,    ...because 1 feet = 12 inch;

(ii) 27 inches = 27 inches;

(iii) 1(1/2) yards = (1.5 × 3 × 12) = 54 inches;

(iv) 2(3/4) feet = (2.75 × 12) = 33 inches;

Now, we can add the lengths of the four-boards:

⇒ 40 + 27 + 54 + 33 = 154 inches,

Therefore, the total length of all four boards is 154 inches.

Learn more about Length here

https://brainly.com/question/30200619

#SPJ1

The data item in this distribution corresponding to a z-score of -7 will be 290.

Here, we have,

The standard score in statistics is the number of standard deviations that a raw score's value is above or below the mean value of what is being observed or measured.

Raw scores that are higher than the mean have positive standard scores, whereas those that are lower than the mean have negative standard scores.

The Z-score measures how much a particular value deviates from the standard deviation.

The Z-score, also known as the standard score, is the number of standard deviations above or below the mean for a given data point.

The standard deviation reflects the level of variability within a particular data collection.

Here,

z=(X-μ)/σ

-7=(X-500)/30

-210=X-500

X=290

The data item in this distribution that corresponds to we given z-score

z equals to -7 will be 290.

To know more about z-score,

brainly.com/question/25819936

#SPJ1

Answer:

7.95

Step-by-step explanation:

We can work percentage problems using the formula

P%x = y, where P is the percentage, x is the "of" value in the problem, and y is the "is" value in the problem.

Thus, in the formula, our p value is 0.30, our x ("of") value is 26.5 and we're trying to find our y ("is") value:

0.30 * 26.5 = y

7.95 = y

Therefore, 30% of 26.5 is 7.95

The speed s, in feet per second, of the car before the brakes were applied is,

⇒ s = 67.5 m/s

To multiply means to add a number to itself a particular number of times. Multiplication can be viewed as a process of repeated addition.

Given that;

Skid mark for the car = 150 ft

And, given equation of speed and distance is,

⇒ s = √24d

Where, d is the distance

And, s is the speed  

Hence, We get;

s = √ 24 × 150

s = √3600

s = 60 m/s

Thus, The speed of the car before it stop is equal to s = 60 m/s

Learn more about the multiplication visit:

https://brainly.com/question/10873737

#SPJ2

The point P ( 1 , -12 ) lies on the graph of the function f ( x ) = 3x² - 6x - 9

Given data ,

Let the function be represented as f ( x )

Now ,

Let the point be P ( 1 , -12 )

And , to determine if the point (1, -12) is on the graph of the function f(x) = 3x² - 6x - 9, we can substitute x = 1 and y = -12 into the equation and check if it satisfies the equation.

Plugging in x = 1 into the equation, we get:

f(1) = 3(1)² - 6(1) - 9

f(1) = 3 - 6 - 9

f(1) = -12

Hence , when x = 1, f(x) = -12. Since f(1) = -12 and the given point is (1, -12), the point (1, -12) does lie on the graph of the function f(x) = 3x² - 6x - 9

To learn more about function rule click :

https://brainly.com/question/3760195

#SPJ1

The height of the thrown bottle becomes zero at the t = 1/2 that is half a second and at t = 3 seconds

An equation is formed by expressing the relationship between two or more mathematical expressions. It can be formed by using mathematical symbols, operations, and variables. Typically, equations are used to solve problems or find unknown quantities by setting up an equation that represents the problem and then manipulating the equation using algebraic operations until the solution is obtained. For example, to solve the equation 2x + 3 = 7, you would use algebraic operations to isolate the variable x on one side of the equation, giving you the solution x = 2.

To find when the height of the thrown bottle is equal to 0, we need to solve the given equation:

h = -16t² + 56t - 24 = 0

Takin -8 common out we get,

-8(2t² - 7t + 3) = 0

Now we can use the zero product property, which states that if the product of two factors is equal to zero, then at least one of the factors must be zero:

-8 = 0 or 2t² - 7t + 3 = 0

But -8 ≠ 0, so we only possible one is,

2t² - 7t + 3 = 0

(2t - 1)(t - 3) = 0

Using the zero product property, we get,

2t - 1 = 0 or t - 3 = 0

Solving for t we get,

t = 1/2 or t = 3

Therefore, the height of the thrown bottle is equal to 0 at t = 1/2 seconds and t = 3 seconds.

To know more about equations visit:

brainly.com/question/29538993

#SPJ1

The height of the thrown bottle becomes zero at the t = 1/2 that is half a second and at t = 3 seconds

An equation is formed by expressing the relationship between two or more mathematical expressions. It can be formed by using mathematical symbols, operations, and variables. Typically, equations are used to solve problems or find unknown quantities by setting up an equation that represents the problem and then manipulating the equation using algebraic operations until the solution is obtained. For example, to solve the equation 2x + 3 = 7, you would use algebraic operations to isolate the variable x on one side of the equation, giving you the solution x = 2.

To find when the height of the thrown bottle is equal to 0, we need to solve the given equation:

h = -16t² + 56t - 24 = 0

Takin -8 common out we get,

-8(2t² - 7t + 3) = 0

Now we can use the zero product property, which states that if the product of two factors is equal to zero, then at least one of the factors must be zero:

-8 = 0 or 2t² - 7t + 3 = 0

But -8 ≠ 0, so we only possible one is,

2t² - 7t + 3 = 0

(2t - 1)(t - 3) = 0

Using the zero product property, we get,

2t - 1 = 0 or t - 3 = 0

Solving for t we get,

t = 1/2 or t = 3

Therefore, the height of the thrown bottle is equal to 0 at t = 1/2 seconds and t = 3 seconds.

To know more about equations visit:

brainly.com/question/29538993

#SPJ1

The simplest form of the expression 6x - 4y - 2x / 2 is 5x - 4y.

What is Simplest form?

In mathematics, simplest form refers to the expression that has been simplified or reduced as much as possible. This means that no further simplification or reduction can be done without changing the value of the expression.

The expression 6x - 4y - 2x / 2 can be simplified using the order of operations (PEMDAS) as follows:

6x - 4y - 2x / 2

= 6x - 4y - x (since 2x / 2 = x)

= 5x - 4y

Therefore, the simplest form of the expression 6x - 4y - 2x / 2 is 5x - 4y.

To learn more about Simplest form visit the link:

https://brainly.com/question/564834

#SPJ1

Answer:

The standard form of the equation of a circle with center at (h, k) and radius r is:

(x - h)^2 + (y - k)^2 = r^2

We are given that the center of the circle is (4, -1), so h = 4 and k = -1. We also know that the circle passes through the point (-4, 1), which means that the distance from the center of the circle to (-4, 1) is the radius of the circle.

The distance between two points (x1, y1) and (x2, y2) is given by the distance formula:

d = sqrt((x2 - x1)^2 + (y2 - y1)^2)

So the radius of the circle is:

r = sqrt((-4 - 4)^2 + (1 - (-1))^2) = sqrt(100) = 10

Now we can substitute the values of h, k, and r into the standard form equation of a circle:

(x - 4)^2 + (y + 1)^2 = 10^2

Expanding the equation gives:

x^2 - 8x + 16 + y^2 + 2y + 1 = 100

Simplifying and putting the equation in standard form, we get:

x^2 + y^2 - 8x + 2y - 83 = 0

Therefore, the equation in standard form of the circle with center at (4, −1) and that passes through the point (−4, 1) is:

x^2 + y^2 - 8x + 2y - 83 = 0

Answer:

x=70°

Step-by-step explanation:

angles on straight line add to 180 so...

180-120=60°

angles in triangle add to 180° so...

180°-50°-60°=70°

so x=70°

The mean amount of money the insurance company can expect to lose on each policy is $142.00 with a standard deviation of $1,243.67.

What is an insurance?

Let X be the random variable representing the amount of money the insurance company will lose on a policy. Then we can calculate the expected value (mean) of X and the standard deviation of X as follows:

Expected value:

E(X) = 30,000(1/1,000) + 10,000(1/250) + 0(1 - 1/1,000 - 1/250) = $142.00

The first term in the sum corresponds to the probability of a client dying (1/1,000) multiplied by the payout ($30,000), the second term corresponds to the probability of a client becoming disabled (1/250) multiplied by the payout ($10,000), and the third term corresponds to the probability of neither event occurring (1 - 1/1,000 - 1/250).

Standard deviation:

To calculate the standard deviation, we need to find the variance of X first:

Var(X) = [30,000 - E(X)]²(1/1,000) + [10,000 - E(X)]²(1/250) + [0 - E(X)]²(1 - 1/1,000 - 1/250)

= $1,547,797.56

The first term in the sum corresponds to the squared difference between the payout for a client dying and the expected payout, multiplied by the probability of a client dying, and so on for the second and third terms.

Then, we can take the square root of the variance to find the standard deviation:

SD(X) = √[Var(X)] = $1,243.67

Therefore, the mean amount of money the insurance company can expect to lose on each policy is $142.00 with a standard deviation of $1,243.67.

To know more about insurance, visit:

https://brainly.com/question/28015669

#SPJ1

The solutions to the equation (x - 5)² = 25 are x = 10 and x = 0.

An equation is a mathematical statement that shows that two expressions are equal. It consists of two sides separated by an equal sign (=). Each side of the equation can contain variables, constants, and mathematical operations such as addition, subtraction, multiplication, and division.

It is a shape with four sides of equal length and four right angles. It is also a number multiplied by itself.

Solve the equation (x - 5)² = 25:

1. Take the square root of both sides of the equation to remove the exponent of 2 on the left side.

  √[(x - 5)²] = √25

2. Simplify the left side by removing the exponent of 2 and keeping the absolute value.

  |x - 5| = 5

3. Write two separate equations to account for both possible values of x when taking the absolute value.

  x - 5 = 5   or   x - 5 = -5

4. Solve for x in each equation.

x = 10   or   x = 0

  So the solutions to the equation (x - 5)² = 25 are x = 10 and x = 0.

Learn more about square root here:

https://brainly.com/question/29286039

#SPJ1

The word that describes the probability that Janelys reaches in without looking and pulls out a strawberry chew is "the probability of selecting a strawberry chew randomly from the bag".

The word or phrase that describes the probability of pulling out a strawberry chew without looking is "the probability of selecting a strawberry chew at random" or "the probability of picking a strawberry chew by chance".

This probability is calculated by dividing the number of strawberry chews in the bag by the total number of chews in the bag, since each chew is equally likely to be selected.

In this case, there are 15 strawberry chews and 5 cherry chews, so the probability of selecting a strawberry chew at random is 15/(15+5) or 3/4, which is approximately 0.75 or 75%.

Read more about probability at

https://brainly.com/question/251701

#SPJ1

Answer:

I worked this out & I got a horribly messy number, but if you still want it, here you go.

The answer I got is 49.833333333333333333333333333333, or
49 833333333333333333333333333333/100000000000000000000000000000.

I could not simplify it. Hopefully, your teacher accepts this.

let's firstly convert the mixed fractions to improper fractions, then multiply.

[tex]\stackrel{mixed}{8\frac{2}{3}}\implies \cfrac{8\cdot 3+2}{3}\implies \stackrel{improper}{\cfrac{26}{3}}~\hfill \stackrel{mixed}{5\frac{3}{4}} \implies \cfrac{5\cdot 4+3}{4} \implies \stackrel{improper}{\cfrac{23}{4}} \\\\[-0.35em] ~\dotfill\\\\ \cfrac{26}{3}\cdot \cfrac{23}{4}\implies \cfrac{26}{4}\cdot \cfrac{23}{3}\implies \cfrac{13}{2}\cdot \cfrac{23}{3}\implies \cfrac{299}{6}\implies 49\frac{5}{6}~ft^2[/tex]

a)0.2407 is the point estimate of the proportion.

b) The 95% confidence interval for the proportion that beat estimates is (0.4858, 0.6746).

c) A sample size of 754 is needed to achieve a desired margin of error of 0.05.

(a) What is the point estimate of the proportion?

The point estimate of the proportion that fell short of estimates is 39/162 = 0.2407. Rounded to four decimal places, this is pshort = 0.2407.

(b) How to determine the margin of error and provide a 95% confidence interval for the proportion that beat estimates?

To determine the margin of error and provide a 95% confidence interval for the proportion that beat estimates, we need to first find the point estimate and standard error of the proportion that beat estimates.

The point estimate of the proportion that beat estimates is 94/162 = 0.5802.

The standard error can be calculated as:

SE = √(p×(1-p)/n)

where p is the point estimate of the proportion that beat estimates and n is the sample size. Substituting the values we get:

SE = √(0.5802×(1-0.5802)/162) = 0.0482

To calculate the margin of error, we use the formula:

ME = zSE

where z is the z-score corresponding to the desired confidence level. For a 95% confidence level, z* = 1.96 (from the standard normal distribution table).

Substituting the values we get:

ME = 1.96×0.0482 = 0.0944

Therefore, the margin of error is 0.0944. To find the 95% confidence interval, we add and subtract the margin of error from the point estimate of the proportion that beat estimates:

CI = 0.5802 ± 0.0944

CI = (0.4858, 0.6746)

Therefore, the 95% confidence interval for the proportion that beat estimates is (0.4858, 0.6746).

(c) How large a sample is needed if the desired margin of error is 0.05?

To find the sample size needed for a desired margin of error of 0.05, we use the formula:

n* = (z*/ME)² × p×(1-p)

where z* is the z-score corresponding to the desired confidence level (we use 1.96 for a 95% confidence level), ME is the desired margin of error (0.05), and p is an estimate of the proportion (we use the point estimate of 0.5802 for the proportion that beat estimates).

Substituting the values we get:

n* = (1.96/0.05)² × 0.5802×(1-0.5802) = 753.16

Rounding up to the next integer, we get n* = 754. Therefore, a sample size of 754 is needed to achieve a desired margin of error of 0.05.

Learn more about estimate of proportion here,

https://brainly.com/question/29436481

#SPJ1

By putting the value it proved that csc²x+cot²x/csc⁴x-cot⁴x=1

Trigonometry is a branch of mathematics that studies relationships between the sides and angles of triangles. Trigonometry is found all throughout geometry, as every straight-sided shape may be broken into as a collection of triangles.There are six type of Trigonometry

According to question,

we have prove that

(csc²x + cot²x) / (csc⁴x - cot⁴x) = 1

Now by manipulating the left-hand side of the equation using trigonometric identities.

Then, we can simplify the denominator using the identity:

a² - b² = (a + b)(a - b)

In this case we get , a = csc²x and b = cot²x, so:

csc⁴x - cot⁴x = (csc²x + cot²x)(csc²x - cot²x)

By substituting this expression into the given equation, we get:

(csc²x + cot²x) / [(csc²x + cot²x)(csc²x - cot²x)] = 1

By solving the numerator, we get:

1 / (csc²x - cot²x) = 1

Now, we can use the identity:

csc²x - cot²x = 1 / sin²x - cos²x / sin²x

= (1 - cos²x) / sin²x

= sin²x / sin²x

= 1

Substituting this expression back into the equation, we get:

1 / 1 = 1

Hence, we have proved that:

(csc²x + cot²x) / (csc⁴x - cot⁴x) = 1.

Learn more about Types of Trigonometry here

https://brainly.com/question/30283045

#SPJ1

The situations that represent a proportional relationship are:

A). Natalia is selling fresh eggs at the local farmer's market. She sells 6 eggs for $3.12, a dozen eggs for $6.24, and eighteen eggs for $9.36.

C). Graph 1 provided in the pictures. This graph shows a straight line passing through the origin, which indicates a proportional relationship.

D). Graph 2 provided in the pictures. This graph also shows a straight line passing through the origin, which indicates a proportional relationship.

E). Azul bought several different packages of 8-inch by 10-inch art canvases for a craft project at her family reunion. The number of canvases in a package and the cost of the package is shown in the table.

Therefore, the situations A, C, D, and E represent proportional relationships.

A proportional relationship is a relationship between two quantities where one quantity is a constant multiple of the other quantity. In other words, if one quantity increases or decreases by a certain factor, then the other quantity will increase or decrease by the same factor. This relationship can be represented by a straight line passing through the origin on a graph.

For example, if the price of gasoline is proportional to the number of gallons purchased, then buying twice as many gallons would cost twice as much money. Similarly, if the distance traveled is proportional to the time taken, then traveling twice as long would cover twice the distance.

Learn more about proportional relationship here: https://brainly.com/question/12242745

#SPJ1

Answer: 15g-25h

Step-by-step explanation:

To use distributive property, you multiply 5x3g individually, and then 5x-5h individually.

You then add them.

So:

5(3g-5h)

=15h-25j

If a single letter from the word SLEEPLESS is chosen, the probability of choosing a P or an S as a fraction in lowest terms is 5/8.

To find the probability of choosing a P or an S from the word SLEEPLESS, we need to first determine the total number of letters in the word and then count how many of those letters are P's or S's.

There are 8 letters in the word SLEEPLESS, so there are 8 possible outcomes when selecting a single letter at random. Of these 8 letters, 2 are P's and 3 are S's.

Therefore, the probability of choosing a P or an S is the sum of the probabilities of choosing a P and choosing an S:

P(P or S) = P(P) + P(S)

P(P) = 2/8 = 1/4, since there are 2 P's out of 8 total letters.

P(S) = 3/8, since there are 3 S's out of 8 total letters.

P(P or S) = 1/4 + 3/8

P(P or S) = 5/8, which is the final probability expressed as a fraction in lowest terms.

Alternatively, we can convert the fraction to a decimal and round to the nearest millionth:

P(P or S) = 0.625

To learn more about probability click on,

https://brainly.com/question/29142178

#SPJ1

The constant of proportionality for the graph given can be found to be 2 / 3.

A fixed numerical quantity that links two variables exhibiting direct proportionality is referred to as the constant of proportionality. This implies that when two factors are directly proportional, a stable ratio exists between them. The same value defines this figure and is identified as the constant of proportionality.

Pick a point on the graph such as ( 3 , 2 ) and ( 6, 4 ), the constant of proportionality would be:

= Change in y / Change in x

= ( 4 - 2) / ( 6 - 3 )

= 2 / 3

Find out more on constant of proportionality at https://brainly.com/question/1835116

#SPJ1

If will be positive if:

-24(a-t) > 0

-(a-t) > 0

-a + t > 0

t > a

Using derivatives, it is found that the particle is moving to the right for t > a , that is, values of t in the interval (a, ∞)

A particle is moving to the right if its velocity is positive.

The position of the particle is given by:

x(t) = 12(a -t)^2

The velocity is the derivative of the position, hence:

v(t) = -24(a-t)

If will be positive if:

-24(a-t) > 0

-(a-t) > 0

-a + t > 0

t > a

Read more about derivatives here:

https://brainly.com/question/28376218

#SPJ1

The sample of given data is Sample 1: 1, 2, 3, 4, 5 Sample 2: 6, 7, 8, 9, 10

b)Sample 1: 1, 2, 3, 4, 5 Sample 2: 6, 7, 8, 9, 10

(a) An example of data with SS(between) = 0 and SS(within) > 0 could be the following:

Sample 1: 1, 2, 3, 4, 5

Sample 2: 6, 7, 8, 9, 10

Sample 3: 11, 12, 13, 14, 15

In this example, the means of each sample are all different from each other, but the grand mean (8) is equal to the mean of each sample. Therefore, there is no variability between the means of the samples, resulting in SS(between) = 0. However, there is still variability within each sample, resulting in SS(within) > 0.

(b) An example of data with SS(between) > 0 and SS(within) = 0 could be the following:

Sample 1: 1, 2, 3, 4, 5

Sample 2: 6, 7, 8, 9, 10

Sample 3: 11, 12, 13, 14, 15

In this example, the means of each sample are all the same (8), but the values within each sample are all different from each other. Therefore, there is variability between the means of the samples, resulting in SS(between) > 0. However, there is no variability within each sample, resulting in SS(within) = 0.

To know more about sample Visit:

https://brainly.com/question/28196409

#SPJ1

The total width for the figure is given as follows:

13 ft 2 in.

The total width for the figure is obtained applying the proportions in the context of the problem.

The measures are given as follows:

The sum of the measures is given as follows:

Each feet is composed by 12 inches, hence:

26 inches = 2 feet and 2 inches.

Hence the sum is given as follows:

11 + 2 = 13 feet and 2 inches.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

The value of the derivative of variable x with respect to parameter t is equal to dx / dt = - 1 / 2.

In this problem we need to find the derivative of variable x with respect to parameter t. This can be done by the following expression:

dy / dx = (dy / dt) / (dx / dt)

If we know that y = 4 · x² + 4, x = - 1 and dy / dt = 4, then the exact value of dy / dt is:

dy / dx = 8 · x

[8 · (- 1)] = 4 / (dx / dt)

- 8 = 4 / (dx / dt)

dx / dt = - 1 / 2

To learn more on derivatives of parametric equations: https://brainly.com/question/31388182

#SPJ1

The value of evaluating the integral expression [tex]\int\limits^a_{-a} \int\limits^{\sqrt{a^2 - y^2}}_{-\sqrt{a^2 - y^2}} \int\limits^{\sqrt{a^2 -x^2 - y^2}}_{-\sqrt{a^2 - x^2 - y^2}} (x^2z + y^2z + z^3) dz dx dy[/tex] is 0

Given that

[tex]\int\limits^a_{-a} \int\limits^{\sqrt{a^2 - y^2}}_{-\sqrt{a^2 - y^2}} \int\limits^{\sqrt{a^2 -x^2 - y^2}}_{-\sqrt{a^2 - x^2 - y^2}} (x^2z + y^2z + z^3) dz dx dy[/tex]

To change to spherical coordinates, we need to express x, y, and z in terms of spherical coordinates: r, θ, and Φ .

In particular, we have

[tex]x &= r \sin\phi \cos\theta, \\y &= r \sin\phi \sin\theta, \\z &= r \cos\phi[/tex]

The Jacobian for the transformation is r² sin(Φ), and the limits of integration become

[tex]-a &\leq x \leq a \quad \Rightarrow \quad 0 \leq r \leq a, \\-\sqrt{a^2 - y^2} &\leq y \leq \sqrt{a^2 - y^2} \quad \Rightarrow \quad 0 \leq \phi \leq \frac{\pi}{2}, \\-\sqrt{a^2 - x^2 - y^2} &\leq z \leq \sqrt{a^2 - x^2 - y^2} \quad \Rightarrow \quad 0 \leq \theta \leq 2\pi.[/tex]

Substituting into the integral, we have

[tex]&\int_{0}^{a} \int_{0}^{\frac{\pi}{2}} \int_{0}^{2\pi} (r^2\sin^2\phi\cos\theta\cdot r\cos\phi + r^2\sin^2\phi\sin\theta\cdot r\cos\phi + r^3\cos^3\phi) r^2 \sin\phi,d\theta d\phi dr \[/tex]

[tex]&\quad = \int_{0}^{a} \int_{0}^{\frac{\pi}{2}} \int_{0}^{2\pi} (r^3\sin^2\phi\cos\theta\cos\phi + r^3\sin^2\phi\sin\theta\cos\phi + r^3\cos^3\phi) \sin\phi, d\theta d\phi dr[/tex]

[tex]&\quad = \int_{0}^{a} \int_{0}^{\frac{\pi}{2}} \int_{0}^{2\pi} r^3\sin\phi\cos\phi (\sin^2\phi\cos\theta + \sin^2\phi\sin\theta + \cos^2\phi) , d\theta d\phi dr \[/tex]

[tex]&\quad = \int_{0}^{a} \int_{0}^{\frac{\pi}{2}} \int_{0}^{2\pi} r^3\sin\phi\cos\phi (\sin^2\phi + \cos^2\phi) , d\theta d\phi dr \[/tex]

[tex]&\quad = \int_{0}^{a} \int_{0}^{\frac{\pi}{2}} \int_{0}^{2\pi} r^3\sin\phi\cos\phi, d\theta d\phi dr \[/tex]

[tex]&\quad = \int_{0}^{a} \int_{0}^{\frac{\pi}{2}} 0, d\theta d\phi dr \&\quad = 0[/tex]

Therefore, the value of the integral is 0.

Read more about derivatives at

https://brainly.com/question/5313449

#SPJ1

Answer:

75 - 25π.

Step-by-step explanation:

To find the work done by a force field on a particle moving along a curve, we use the line integral of the force field over that curve.

In this case, the curve is a circle of radius 5 centered at (0, 0, 3) lying on the plane z = 3. We can parameterize this curve using polar coordinates as:

r(t) = (5cos(t), 5sin(t), 3), where t goes from 0 to 2π.

The differential of the curve, dr(t), is given by:

dr(t) = (-5sin(t), 5cos(t), 0) dt

Now we need to calculate the work done by the force field F along this curve. The line integral of F over the curve is given by:

W = ∫ F · dr = ∫ (2x +y²Z)dx + (2x-4y+Z)dy + (x-2y-Z²)dz

Substituting x = 5cos(t), y = 5sin(t), and z = 3, we get:

W = ∫ (10cos(t) + 25sin²(t)·3) (-5sin(t))dt

∫ (10cos(t) - 20sin(t) + 3) (5cos(t))dt

∫ (5cos(t) - 10sin(t) - 9) (0)dt

Simplifying, we get:

W = -75∫sin(t)cos(t)dt + 50∫cos²(t)dt + 0

Using the trigonometric identities sin(2t) = 2sin(t)cos(t) and cos²(t) = (1 + cos(2t))/2, we can simplify this further:

W = -75∫(1/2)sin(2t)dt + 25∫(1 + cos(2t))dt

= -75·(1/2)·(-cos(2t))∣₀^(2π) + 25·(t + (1/2)sin(2t))∣₀^(2π)

= 75 - 25π

Therefore, the work done by the force field F on the particle moving along the circle of radius 5 centered at (0, 0, 3) lying on the plane z = 3 is 75 - 25π.

The probability of drawing one card from a standard deck of cards and choosing a "face card" is 3/13.

What is probability?

Probability is a measure of the likelihood or chance of an event occurring, expressed as a number between 0 and 1, where 0 indicates impossibility and 1 indicates certainty.

There are a total of 12 face cards in a standard deck of 52 cards (4 jacks, 4 queens, and 4 kings).

The probability of drawing a face card can be calculated by dividing the number of face cards by the total number of cards in the deck:

P(face card) = number of face cards / total number of cards

[tex]P(face \: card) = \frac{12}{52} \\ P(face \: card) = \frac{3}{13} [/tex]

Therefore, the probability is D. 3/13.

Learn more about probability here,

https://brainly.com/question/24756209

#SPJ1

Answer:

The asymptote is 0.

Step-by-step explanation:

In [tex]f(x)=a^x+b[/tex], b is the asymptote.

Answer:

it's 0

Step-by-step explanation:

Answer:  To show that the equation "3sin () tan () = 5cos () - 2" is equivalent to the equation "(4 cos() - 3)(2 cos () + 1) = 0", we need to simplify the first equation and check if it has the same solutions as the second equation.

Starting with the first equation:

3sin () tan () = 5cos () - 2

Using the identity tan () = sin () / cos (), we can write:

3sin () (sin () / cos ()) = 5cos () - 2

Multiplying both sides by cos (), we get:

3sin^2 () = (5cos () - 2)cos ()

Using the identity sin^2 () + cos^2 () = 1 and rearranging, we get:

3(1 - cos^2 ()) = 5cos^2 () - 2cos ()

Expanding and rearranging, we get:

5cos^2 () - 2cos () - 3 + 3cos^2 () = 0

Simplifying, we get:

8cos^2 () - 2cos () - 3 = 0

Now, we can use the quadratic formula to solve for cos ():

cos () = [2 ± sqrt(2^2 - 4(8)(-3))]/(2(8))

cos () = [2 ± sqrt(100)]/16

cos () = (1/4) or (-3/8)

Substituting these values back into the original equation, we can verify that they satisfy the equation.

Now, let's consider the second equation:

(4 cos() - 3)(2 cos () + 1) = 0

This equation is satisfied when either 4cos() - 3 = 0 or 2cos() + 1 = 0.

Solving for cos() in the first equation, we get:

4cos() - 3 = 0

cos() = 3/4

Substituting this value back into the original equation, we can verify that it satisfies the equation.

Solving for cos() in the second equation, we get:

2cos() + 1 = 0

cos() = -1/2

Substituting this value back into the original equation, we can also verify that it satisfies the equation.

Therefore, we have shown that the equation "3sin () tan () = 5cos () - 2" is equivalent to the equation "(4 cos() - 3)(2 cos () + 1) = 0".