Answer:
1. 1/6
2. 1/2
Step-by-step explanation:
A dice has 6 sides. So the sample space for this question =
[1,2,3,4,5,6]
1. From the sample space we can see that 6 occurs only once in a dice
So probability of a 6
= 1/6
2. Number of odds = 3 (1,3,5)
Probability Leah rolls an odd number
= Odd/total
= 3/6
= 1/2
Coffee company wants to make sure that their coffee is being served at the right temperature. If it is too hot, the customers could burn themselves. If it is too cold, the customers will be unsatisfied. The company has determined that they want the average coffee temperature to be 65 degrees C. They take a sample of 20 orders of coffee and find the sample mean to be equal to 70. 2 C What does mu represent for this problem?
The average temperature of coffee in the population, which is unknown.
The average temperature of coffee in the population, which is 70. 2.
The average temperature of coffee in the sample, which is unknown.
The average temperature of coffee in the sample, which is 70. 2
The average temperature of coffee in the population, which is unknown.
In this problem, "mu" represents the average temperature of coffee in the population, which is unknown.
When conducting statistical analysis, it is common to use Greek letter μ (mu) to represent the population mean.
The population mean represents the average value of a variable in the entire population being studied.
In this case, the coffee company wants to ensure that the average temperature of their coffee, which is represented by μ, is at the desired level of 65 degrees Celsius.
However, the population mean is unknown to the company, and they are trying to estimate it based on a sample.
The sample mean, denoted by [tex]\bar{x}[/tex] (x-bar), is the average temperature of coffee in the sample they took. In this problem, the sample mean is reported as 70.2 degrees Celsius.
It's important to differentiate between the sample mean (70.2) and the population mean (μ).
The sample mean provides an estimate of the population mean, but it is not necessarily the same value.
In summary, in this problem, μ represents the average temperature of coffee in the population, which is unknown.
The sample mean, [tex]\bar{x}[/tex] is the average temperature of coffee in the sample and is reported as 70.2 degrees Celsius.
For similar question on average temperature.
https://brainly.com/question/29027658
#SPJ8
Which values of x are solutions to the equation below 15x^2 - 56 = 88 - 6x^2?
a. x = -4, x = 4
b. x = -4, x = -8
c. x = 4, x = 8
d. x = -8, x = 8
A quadratic equation is a polynomial equation of degree 2, which means the highest power of the variable is 2. It is generally written in the form: ax^2 + bx + c = 0. Option (d) x = -8, x = 8 is the correct answer.
The given equation is 15x^2 - 56 = 88 - 6x^2.
We need to find the values of x that are solutions to the given equation.
Solution: We are given an equation 15x² - 56 = 88 - 6x².
Rearrange the equation to form a quadratic equation in standard form as follows: 15x² + 6x² = 88 + 56 21x² = 144
x² = 144/21 = 48/7
Therefore x = ±sqrt(48/7) = ±(4/7)*sqrt(21).
The values of x that are solutions to the given equation are x = -4/7 sqrt(21) and x = 4/7 sqrt(21).
To Know more about quadratic equation visit:
https://brainly.com/question/29269455
#SPJ11
The given equation is 15x² - 56 = 88 - 6x². Values of x are solutions to the equation below 15x² - 56 = 88 - 6x² are x = -2.62, 2.62 or x ≈ -2.62, 2.62.
Firstly, let's add 6x² to both sides of the equation as shown below.
15x² - 56 + 6x² = 88
15x² + 6x² - 56 = 88
Simplify as shown below.
21x² = 88 + 56
21x² = 144
Now let's divide both sides by 21 as shown below.
x² = 144/21
x² = 6.86
Now we need to solve for x.
To solve for x we need to take the square root of both sides.
Therefore, x = ±√(6.86).
Therefore, the values of x are solutions to the equation below are x = -2.62, 2.62 or x ≈ -2.62, 2.62.
To know more about solution, visit:
https://brainly.com/question/14603452
#SPJ11
Let A=La 'a] be ] be a real matrix. Find necessary and sufficient conditions on a, b, c, d so that A is diagonalizable—that is, so that A has two (real) linearly independent eigenvectors.
The necessary and sufficient conditions for A to be diagonalisable are:
The quadratic equation (ad - aλ - dλ + λ^2 - bc = 0) must have two distinct real roots.
These distinct real roots correspond to two linearly independent eigenvectors.
To determine the necessary and sufficient conditions for the real matrix A = [[a, b], [c, d]] to be diagonalizable, we need to examine its eigenvalues and eigenvectors.
First, let λ be an eigenvalue of A, and v be the corresponding eigenvector. We have Av = λv.
Expanding this equation, we get:
[a, b] * [v1] = λ * [v1]
[c, d] [v2] [v2]
This leads to the following system of equations:
av1 + bv2 = λv1
cv1 + dv2 = λv2
Rearranging these equations, we get:
av1 + bv2 - λv1 = 0
cv1 + dv2 - λv2 = 0
This can be rewritten as:
(a - λ)v1 + bv2 = 0
cv1 + (d - λ)v2 = 0
To have non-trivial solutions, the determinant of the coefficient matrix must be zero. Therefore, we have the following condition:
(a - λ)(d - λ) - bc = 0
Expanding this equation, we get:
ad - aλ - dλ + λ^2 - bc = 0
This is a quadratic equation in λ. For A to be diagonalisable, this equation must have two distinct real roots.
Learn more about eigenvalue here, https://brainly.com/question/15586347
#SPJ11
Two people are working in a small office selling shares in a mutual fund. Each is either on the phone or not. Suppose that calls come in to the two brokers at rate λ1=λ2 = 1 per hour,while the calls are serviced at rate μ1 =μ2 = 3.
(a) Formulate a Markov chain model for this system with state space { 0 ,1 , 2 ,12 } where the state indicates who is on the phone. (b) Find the stationary disturbtion. (c) Suppose they upgrade their telephone system so that a call one line that is busy is forwarded to the other phone and lost if that phone is busy. (d) Compare the rate at which calls are lost in the two systems.
The Markov chain model for this system can be represented as follows:
State 0: Neither broker is on the phone
State 1: Broker 1 is on the phone, and Broker 2 is not
State 2: Broker 2 is on the phone, and Broker 1 is not
State 12: Both brokers are on the phone
The transition rates between states are as follows:
From state 0, a transition to state 1 occurs at rate λ1 = 1 per hour.
From state 0, a transition to state 2 occurs at rate λ2 = 1 per hour.
From state 1, a transition to state 0 occurs at rate μ1 = 3 per hour (call serviced).
From state 2, a transition to state 0 occurs at rate μ2 = 3 per hour (call serviced).
From state 1, a transition to state 12 occurs at rate λ2 = 1 per hour.
From state 2, a transition to state 12 occurs at rate λ1 = 1 per hour.
From state 12, a transition to state 0 occurs at rate μ1 = 3 per hour (call serviced) if Broker 1 finishes the call first.
From state 12, a transition to state 0 occurs at rate μ2 = 3 per hour (call serviced) if Broker 2 finishes the call first.
(b) To find the stationary distribution, we solve the system of equations:
π0λ1 = π1μ1 + π2μ2
π0λ2 = π2μ2 + π1μ1
π1λ2 = π12μ1
π2λ1 = π12μ2
π0 + π1 + π2 + π12 = 1
Solving these equations will give us the stationary distribution (π0, π1, π2, π12).
(c) With the upgraded telephone system, a call on one line that is busy is forwarded to the other phone and lost if that phone is busy. This implies that the system can no longer be in state 12 since both brokers cannot be on the phone simultaneously.
(d) To compare the rate at which calls are lost in the two systems, we need to analyze the transition rates and the probability of being in state 12 in the original system versus the upgraded system.
Learn more about Markov chain model from
https://brainly.com/question/30975299
#SPJ11
Let Y_1, Y_2, ..., Y_n be a random sample from a population with probability density function of the form
f_Y (y) = [ exp{− (y −c)}, if y>c]
0, o.w..
Show that Y_(1) = min {Y_1, Y_2,..., Y_n} is a consistent estimator of the parameter -[infinity]
The minimum value, Y_(1), from a random sample of Y_1, Y_2, ..., Y_n, where the probability density function is given by f_Y (y) = [ exp{− (y −c)}, if y>c] and 0 otherwise, is a consistent estimator of the parameter c.
To show that Y_(1) is a consistent estimator of the parameter c, we need to demonstrate that it converges in probability to c as the sample size, n, increases.
Since Y_(1) represents the minimum value of the sample, it can be written as Y_(1) = min{Y_1, Y_2, ..., Y_n}. For any given y > c, the probability that all n observations are greater than y is given by (1 - exp{− (y −c)}[tex])^n[/tex]. As n approaches infinity, this probability approaches 0.
Conversely, for y ≤ c, the probability that at least one observation is less than or equal to y is [tex])^n[/tex]. As n approaches infinity, this probability approaches 1.
Therefore, as the sample size increases, the probability that Y_(1) is less than or equal to c approaches 1, while the probability that Y_(1) is greater than c approaches 0. This demonstrates that Y_(1) converges in probability to c, making it a consistent estimator of the parameter c.
Learn more about parameter here:
https://brainly.com/question/30896561
#SPJ11
let r be the region between the parabola y=9-x^2 and the line joining (-3,0) to (2,5) assign the result to q2
The answer is 32.34 square units.
We want to find the area of the region `R` which is bounded by the parabola `y=9−x^2` and the line joining the points `(-3, 0)` and `(2, 5)`.
We can use integration to find the area of this region.
We can divide this region into two parts: region `1` which lies above the line `y = x + 3` and region `2` which lies below this line.
Now, we need to find the equation of the line joining the two given points.
We can use the slope-intercept form of the line for this: `y - y1 = m(x - x1)`, where `m` is the slope and `(x1, y1)` is a point on the line. Using the two given points, we get:m = (5 - 0)/(2 - (-3))= 1y - 0 = 1(x + 3)y = x + 3
Therefore, the line joining the two given points is `y = x + 3`.Now, we need to find the points of intersection of the line `y = x + 3` and the parabola `y = 9 - x^2`.x + 3 = 9 - x^2x^2 + x - 6 = 0(x + 3)(x - 2) = 0x = -3 or x = 2
Using these values of `x`, we can find the corresponding values of `y`.y = 9 - x^2For `x = -3`, `y = 9 - (-3)^2 = 0`.So, the point of intersection is `(-3, 0)`.
For `x = 2`, `y = 9 - 2^2 = 5`.So, the other point of intersection is `(2, 5)`.
Now, we can integrate to find the area of each region. We use `x` as the variable of integration and integrate from the leftmost point to the rightmost point of each region.
Region `1`:This region lies above the line `y = x + 3`. So, we need to subtract the area of the line from the area under the parabola.
The equation of the line is `y = x + 3`.
Therefore, the area of the region is:`q_1 = ∫_{-3}^{2} [(9 - x^2) - (x + 3)] dx`=`∫_{-3}^{2} (-x^2 - x + 6) dx`= [- (x^3)/3 - (x^2)/2 + 6x]_{-3}^{2}= [-8.83] - [(-16.17)]= 7.34
Region `2`:This region lies below the line `y = x + 3`. So, we need to subtract the area under the parabola from the area of the line.
The equation of the line is `y = x + 3`.
Therefore, the area of the region is:`q_2 = ∫_{-3}^{2} [(x + 3) - (9 - x^2)] dx`=`∫_{-3}^{2} (x^2 + x - 6) dx`= [(x^3)/3 + (x^2)/2 - 6x]_{-3}^{2}= [16.17] - [(-8.83)]= 25.00
Therefore, the area of region `R` is:`q_1 + q_2 = 7.34 + 25.00`=`32.34` square units.Hence, the answer is 32.34 square units.
Know more about parabola here,
https://brainly.com/question/11911877
#SPJ11
The partial sum 1 + 10 + 19 +.... 199 equals :___________
The partial sum of the given sequence, 1 + 10 + 19 + ... + 199, can be found by identifying the pattern and using the formula for the sum of an arithmetic series. Hence, the partial sum of the sequence 1 + 10 + 19 + ... + 199 equals 4497.
To find the partial sum of the given sequence, we can observe the pattern in the terms. Each term is obtained by adding 9 to the previous term. This indicates that the common difference between consecutive terms is 9.
The formula for the sum of an arithmetic series is Sₙ = (n/2)(a + l), where Sₙ is the sum of the first n terms, a is the first term, and l is the last term.
In this case, the first term a is 1, and we need to find the value of l. Since each term is obtained by adding 9 to the previous term, we can determine l by solving the equation 1 + (n-1) * 9 = 199.
By solving this equation, we find that n = 23, and the last term l = 199.
Substituting the values into the formula for the partial sum, we have:
S₂₃ = (23/2)(1 + 199),
= 23 * 200,
= 4600.
However, this sum includes the terms beyond 199. Since we are interested in the partial sum up to 199, we need to subtract the excess terms.
The excess terms can be calculated by finding the sum of the terms beyond 199, which is (23/2)(9) = 103.5.
Therefore, the partial sum of the given sequence is 4600 - 103.5 = 4496.5, or approximately 4497 when rounded.
Hence, the partial sum of the sequence 1 + 10 + 19 + ... + 199 equals 4497.
Learn more about partial sum here:
https://brainly.com/question/30339361
#SPJ11
Evaluate the following double integral by reversing the order of integration. ∫∫ev dv
By reversing the order of integration, the double integral ∫∫e^v dv becomes (e^b - e^a) times the length of the interval [c, d].
To evaluate the double integral ∫∫e^v dv, we can reverse the order of integration.
Let's express the integral in terms of the new variables v and u, where the limits of integration for v are a to b, and the limits of integration for u are c to d.
The reversed integral becomes ∫∫e^v dv = ∫ from c to d ∫ from a to b e^v dv du.
We can now evaluate the inner integral with respect to v first. Integrating e^v with respect to v gives us e^v as the result.
So, the reversed integral becomes ∫ from c to d [e^v] evaluated from a to b du.
Next, we evaluate the outer integral with respect to u. Substituting the limits of integration, we have ∫ from c to d [e^b - e^a] du.
Finally, we integrate e^b - e^a with respect to u over the interval from c to d, which gives us (e^b - e^a) times the length of the interval [c, d].
In summary, by reversing the order of integration, the double integral ∫∫e^v dv becomes (e^b - e^a) times the length of the interval [c, d].
Know more about Integration here:
https://brainly.com/question/31744185
#SPJ11
Solve the problem. The logistic growth model P(1) - 260 represents the population of a species introduced into a 1.64e-0.15 new territory after tyears. When will the population be 70? 7.34 years O 20 years O 18.02 years 5.36 years
The population will reach 70 after approximately 18.02 years according to the logistic growth model equation. Therefore, the answer is 18.02 years.
To compute the equation, we can use the logistic growth model equation P(t) = L / (1 + C * e^(-k * t)), where P(t) represents the population at time t, L is the limiting population, C is the initial population constant, and k is the growth rate constant.
In this case, we are given P(1) = 260, which allows us to find the value of C.
Plugging in P(1) = 260 and simplifying the equation, we get 260 = L / (1 + C * e^(-k)), which can be rearranged to L = 260 + 260 * C * e^(-k).
To compute the time when the population will be 70, we substitute P(t) = 70 and solve for t.
We get 70 = L / (1 + C * e^(-k * t)), which can be rearranged to 1 + C * e^(-k * t) = L / 70.
Since we know the values of L, C, and k from the initial equation, we can substitute them into the rearranged equation and solve for t. The resulting value for t is approximately 18.02 years.
Therefore, the population will be 70 after approximately 18.02 years.
To know more about logistic growth model refer here:
https://brainly.com/question/31041055#
#SPJ11
A total of 100 undergraduates were recruited to participate in a study on the effects of study location on learning. The study employed a 2 x 2 between-subjects design, with all participants studying a chapter on the science of gravity and then being tested on the to-be-learned material one week later. Fifty of the participants were asked to study the chapter at the library, whereas the other fifty were asked to study the chapter at home. As a separate manipulation, participants were either told to study the chapter for 30 min or 120 min. The hypothetical set of data shown below represents the level of performance of participants on the test as a function of condition. 30 min 120 min Library 60 80 Home 40 60
a) Is there a main effect of Study Location? In answering, provide the marginal means and state the direction of the effect (if there is one).
b) Is there a main effect of Study Duration? In answering, provide the marginal means and state the direction of the effect (if there is one).
c) Do the results indicate an interaction? If so, describe the nature of the interaction by comparing the simple effects.
d) Illustrate the results with a bar graph (make sure the variables and axes are labeled appropriately)
e) Interpret the results. What do they tell you about how study location affects learning? (be sure to refer to the interaction or lack thereof)
(a) The marginal mean for studying at the library (70) is higher than the marginal mean for studying at home (50). So, there is a main effect of Study Location, and studying at the library appears to be associated with better performance on the test compared to studying at home.
To determine if there is a main effect of Study Location, we need to compare the average performance on the test for participants who studied at the library versus those who studied at home.
The marginal mean for studying at the library is (60 + 80) / 2 = 70.
The marginal mean for studying at home is (40 + 60) / 2 = 50.
(b) The marginal mean for studying for 120 minutes (70) is higher than the marginal mean for studying for 30 minutes (50).
Therefore, there is a main effect of Study Duration, and studying for a longer duration (120 minutes) appears to be associated with better performance on the test compared to studying for a shorter duration (30 minutes).
(c) There is a difference in the pattern of performance across Study Location for each level of Study Duration. This indicates an interaction between Study Location and Study Duration.
To determine if there is an interaction, we need to compare the performance of participants across different combinations of Study Location and Study Duration.
For studying for 30 minutes:
1) The performance at the library is 60.
2) The performance at home is 40.
For studying for 120 minutes:
1) The performance at the library is 80.
2) The performance at home is 60.
(d) Here is an illustration of the results:
Study Location
Library Home
30 min | 60 | | 40 |
120 min | 80 | | 60 |
(e) The results indicate that there is a main effect of Study Location, suggesting that studying at the library is associated with better performance on the test compared to studying at home.
There is also a main effect of Study Duration, indicating that studying for a longer duration (120 minutes) is associated with better performance compared to studying for a shorter duration (30 minutes).
Furthermore, there is an interaction between Study Location and Study Duration, meaning that the effect of Study Location on performance depends on the duration of study.
Specifically, the advantage of studying at the library over studying at home is more pronounced when participants study for a longer duration (120 minutes) compared to a shorter duration (30 minutes).
To know more about marginal mean refer here:
https://brainly.com/question/32067583#
#SPJ11
Question 6 Determine the extreme point (x*, y*) and its nature of the following function: z = 3x² - xy + y² + 5x + 3y + 18 23 (-13, -2), Minimum 19 49 4), Maximum 19 19 (-1,-¹), Maximum (-10-13839)
The extreme point (x*, y*) of the function z = 3x² - xy + y² + 5x + 3y + 18 is (-1, -1), and it is a maximum point.
To find the extreme point, we need to find the critical points of the function. We take the partial derivatives with respect to x and y and set them equal to zero:
∂z/∂x = 6x - y + 5 = 0 ... (1)
∂z/∂y = -x + 2y + 3 = 0 ... (2)
Solving equations (1) and (2) simultaneously, we find x = -1 and y = -1. Substituting these values back into the original function, we get z = 3(-1)² - (-1)(-1) + (-1)² + 5(-1) + 3(-1) + 18 = 19.
To determine the nature of the extreme point, we need to analyze the second partial derivatives. Calculating the second partial derivatives:
∂²z/∂x² = 6
∂²z/∂y² = 2
∂²z/∂x∂y = -1
The discriminant D = (∂²z/∂x²)(∂²z/∂y²) - (∂²z/∂x∂y)² = (6)(2) - (-1)² = 12 - 1 = 11, which is positive. This indicates that the point (-1, -1) is a maximum point.
To know more about maximum point, refer here:
https://brainly.com/question/22562190#
#SPJ11
STATISTICS
16. Assume that a sample is used to estimate a population mean, . Use the given confidence level and sample data to find the margin of error. Assume that the sample is a simple random sample and the population has a normal distribution. Round your answer to one more decimal place than the sample standard deviation.
99% confidence, n = 21, mean = 108.5, s = 15.3
A. 3.34
B. 99.00
C. 9.50
D. 2.85
Answer:
The margin of error is calculated by multiplying a critical factor (for a certain confidence level) with the population standard deviation. Then the result is divided by the square root of the number of observations in the sample. Mathematically, it is represented as: Margin of Error = Z * ơ / √n where z = critical factor, ơ = population standard deviation and n = sample size1.
In your case, you have a 99% confidence level, n = 21, mean = 108.5 and s = 15.3. However, you have not provided the critical value (z) for a 99% confidence level. You can use a z-table to find the critical value for a 99% confidence level.
Once you have the critical value, you can use the formula above to calculate the margin of error.
The critical value (z) for a 99% confidence level is approximately 2.576 1. You can use this value in the margin of error formula: Margin of Error = Z * ơ / √n where z = critical factor, ơ = population standard deviation and n = sample size1.
In your case, you have a 99% confidence level, n = 21, mean = 108.5 and s = 15.3. Plugging these values into the formula gives you a margin of error of approximately 7.98.
Therefore, the correct answer is (C) 9.50.
please help
6. In an arithmetic sequence of 50 terms, the 17" term is 53 and the 28" term is 86. Determine the sum of the first 50 terms of the corresponding arithmetic series. 15
The sum of the first 50 terms of the the given arithmetic series is 4500.
Let a be the first term, and d be the common difference of an arithmetic sequence.
Arithmetic sequence formula:
a_n = a + (n - 1) d.
Here a_n is the nth term of an arithmetic sequence.
Substitute the given values in the formula,
For 17th term, a_17 = a + (17 - 1) d, given a_17 = 53... (1)
For 28th term, a_28 = a + (28 - 1) d, given a_28 = 86... (2)
By subtracting equation (1) from equation (2) we can eliminate a.
So, a_28 - a_17 = 9d = 86 - 53
=> 9d = 33
=> d = 33/9 = 11/3
Substitute d = 11/3 in equation (1)
53 = a + (17 - 1)
(11/3)53 = a + 16
(11/3)a = 53 - 16
(11/3) = 5
Substitute a = 5, d = 11/3, and n = 50 in the sum formula of an arithmetic series,
Sum of the first 50 terms of an arithmetic sequence = n/2 [2a + (n - 1) d]= 50/2 [2 (5) + (50 - 1) (11/3)]= 25 (10 + 539/3)= 25 (540/3)= 25 (180)= 4500
Therefore, the sum of the first 50 terms of the corresponding arithmetic series is 4500.
To learn more about arithmetic series visit : https://brainly.com/question/6561461
#SPJ11
subtract − 2 2 4 − 1 −2x 2 4x−1minus, 2, x, squared, plus, 4, x, minus, 1 from 6 2 3 − 9 6x 2 3x−96, x, squared, plus, 3, x, minus, 9.
The subtraction of (−2x^2 + 4x − 1) from (6x^2 + 3x − 9) results in the expression (8x^2 − 7x − 8).
To subtract (−2x^2 + 4x − 1) from (6x^2 + 3x − 9), we need to perform the subtraction operation for each corresponding term.
(6x^2 + 3x − 9) - (−2x^2 + 4x − 1) = 6x^2 + 3x − 9 + 2x^2 − 4x + 1
Combining like terms, we have:
8x^2 − 7x − 8
Therefore, the result of the subtraction is 8x^2 − 7x − 8.
To know more about subtraction click here: brainly.com/question/13619104
#SPJ11
A random sample of n observations is selected from a normal population to test the null hypothesis that μ = 10. Specify the rejection region for each of the following combinations of H_a, α and n
a. H _a : μ≠10; α=0.10; n=15
b. H_a:μ > 10; α=0.01;n=22
c. H _a : μ>10; α=0.05; n=11
b. H_a:μ <10; α=0.01;n=13
e. H _a : μ≠10; α=0.05; n=17
b. H_a:μ < 10; α=0.10;n=5
a. Select the correct choice below and fill in the answer box within your choice. (Round to three decimal places as needed)
A. [t] > _____
B. t> ______
C. t < ______
The rejection regions are as :
a. A. [t] > 2.145
b. B. t > 2.831
c. B. t > 1.812
d. C. t < -2.681
e. A. [t] > 2.120
f. C. t < -1.533
What is the rejection region?The critical values of the t-distribution based on the given significance level (α) and degrees of freedom (df = n - 1) are used to determine the rejection region.
a. H_a: μ≠10; α=0.10; n=15
Since it is a two-tailed test, we need to divide the significance level by 2: α/2 = 0.10/2 = 0.05.
Using a calculator with df = 15 - 1 = 14, the critical values for a 0.05 significance level: t = ±2.145.
Rejection region: A. [t] > 2.145
b. H_a: μ > 10; α=0.01; n=22
It is a right-tailed test, the critical value that corresponds to a 0.01 significance level will be:
Using a calculator with df = 22 - 1 = 21, we find the critical value: t = 2.831.
Rejection region: B. t > 2.831
c. H_a: μ > 10; α=0.05; n=11
It is a right-tailed test, the critical value that corresponds to a 0.05 significance level.
Using a calculator with df = 11 - 1 = 10, we find the critical value: t = 1.812.
Rejection region: B. t > 1.812
d. H_a: μ < 10; α=0.01; n=13
Since it is a left-tailed test, we look for the critical value corresponding to a 0.01 significance level.
Using a calculator with df = 13 - 1 = 12, we find the critical value: t = -2.681.
Rejection region: C. t < -2.681
e. H_a: μ≠10; α=0.05; n=17
It is a two-tailed test, the significance level will be 0.05/2 = 0.025.
Using a calculator with df = 17 - 1 = 16, the critical values for a 0.025 significance level: t = ±2.120.
Rejection region: A. [t] > 2.120
f. H_a: μ < 10; α=0.10; n=5
It is a left-tailed test, the critical value corresponding to a 0.10 significance level will be:
Using a calculator with df = 5 - 1 = 4, we find the critical value: t = -1.533.
Rejection region: C. t < -1.533
Learn more about rejection region at: https://brainly.com/question/15970126
#SPJ4
A pizza place has only the following toppings: ham, mushrooms, pepperoni, anchovies, bacon, onions, chives and sausage. What is the total number of available pizzas?
There are 256 possible pizzas that can be made with these toppings.
To calculate the total number of available pizzas, we need to consider the fact that each pizza can have a combination of toppings, and each topping can either be present or absent. This means that the total number of possible pizza combinations is equal to 2 to the power of the number of available toppings.
In this case, there are 8 available toppings, so the total number of possible pizza combinations is:
[tex]2^{8\\}[/tex] = 256
Therefore, there are 256 possible pizzas that can be made with these toppings.
Learn more about Total :https://brainly.com/question/25109150
#SPJ11
Solve the initial-value problem I ty (3) - + 3xy(x) + 5y(x) = ln («), y(1) -1, y (1) = 1 where x is an independent variable:y depends on x, and x > 1. Then determine the critical value of x that delivers minimum to y(x) for * 1. This value of x is somewhere between 4 and 5. Round-off your numerical result for the critical value of x to FOUR significant figures and provide it below (20 points): (your numerical answer must be written here=____)
the required solution of the given differential equation is
y = - (In (x) + 7) / 25 + (3√11/25)sin√11/2(x) + (2√11/25)cos√11/2(x).
Given differential equation is x²y''(x) + 3xy'(x) + 5y(x) = In (x).Let us solve the given initial value problem. Differential equation is x²y''(x) + 3xy'(x) + 5y(x) = In (x).
The characteristic equation of this equation is given as
x²m² + 3xm + 5 = 0.
Using quadratic formula,
m₁= (−3x+i√11x²)/2x² and m₂= (−3x−i√11x²)/2x².
As m₁ and m2 are complex roots so the general solution is
y = [tex]c_1e^{(-3x)/2}cos \sqrt{(11x)} /2+ c_2e^{(-3x)/2}sin\sqrt{(11x)}/2[/tex]
Now, we find the first and second derivatives of y.
y = [tex]c_1e^{((-3x)/2)}cos \sqrt{(11x)}/2 + c_2e^{(-3x)/2}sin\sqrt{(11x)}/2[/tex]
y' = [tex](−3c_1/2)e^{(-3x)/2}cos\sqrt{(11x)}/2 + (−3c_2/2)e^{(-3x)/2}sin\sqrt{(11x)}/2 + \\c_1(e^{(-3x)/2)}(−\sqrt{(11x)}/2)sin \sqrt{(11x)}/2 + c_2(e^{(-3x)/2)}(\sqrt{(11x)}/2)cos\sqrt{(11x)}/2[/tex]
y'' = [tex](9c_1/4)e^{(-3x)/2)}cos\sqrt{(11x)}/2 + (9c_2/4)e^{(-3x)/2}sin\sqrt{(11x)}/2 - \\(3c_1/2)(e^{((-3x)/2))}(\sqrt{(11x)}/2)sin\sqrt{(11x)}/2 + (3c_2/2)(e^{(-3x)/2)}(\sqrt{(11x)}/2)cos\sqrt{(11x)}/2\\ - (c_1e^{((-3x)/2))}(11x/4)cos\sqrt{(11x)}/2 - (c_2e^{((-3x)/2))}(11x/4)sin\sqrt{(11x)}/2[/tex]
Putting the values of y, y' and y'' in the differential equation, we get the value of c₁ and c₂ as
y = - (In (x) + 7) / 25 + (3√11/25)sin√11/2(x) + (2√11/25)cos√11/2(x)
Now, we substitute the initial values in the above equation.
y(1) = - (In (1) + 7) / 25 + (3√11/25)sin√11/2(1) + (2√11/25)cos√11/2(1) = 1.
So, c₁ = (In (1) + 7) / 25 - (3√11/25)sin√11/2(1) - (2√11/25)cos√11/2(1).
y'(1) = (-3c₁/2)[tex]e^{((-3(1))/2)}[/tex]cos√11/2(1) + (-3c₂/2)[tex]e^{((-3(1))/2)}[/tex]sin√11/2(1) + c₁([tex]e^{((-3(1))/2)}[/tex](−√11/2)sin√11/2(1) + c₂([tex]e^{((-3(1))/2)}[/tex](√11/2)cos√11/2(1) = 1.
So, c₂ = (2√11/25) - (3c₁/2)[tex]e^{((-3)/2)}[/tex]cos√11/2(1) - (c₁[tex]e^{((-3)/2)}[/tex])(11/4)cos√11/2(1) - (1/2)[tex]e^{((-3)/2)}[/tex])sin√11/2(1).
Therefore, the required solution of the given differential equation is
y = - (In (x) + 7) / 25 + (3√11/25)sin√11/2(x) + (2√11/25)cos√11/2(x).
Learn more about differential equation here
brainly.com/question/25731911
#SPJ4
Let P(x,y) denote the statement "x is at least twice as large as y." Determine the truth values for the following: (a) P(5,2) (b) P(100, 29) (c) P(2.25, 1.13) (d) P(5,2.3) (e) P(24, 12) (f) P(3.14, 2.71) (g) P(100, 1000) (h) P(3,6) (i) P(1,1) (j) P(45%, 22.5%) 3
The truth values are:
(a) True
(b) True
(c) True
(d) True
(e) True
(f) True
(g) False
(h) False
(i) False
(j) False
To determine the truth values for the statements, we need to check whether the first value is at least twice as large as the second value. If it is, then the statement is true; otherwise, it is false.
(a) P(5,2): True, since 5 is at least twice as large as 2.
(b) P(100,29): True, since 100 is more than twice as large as 29.
(c) P(2.25,1.13): True, since 2.25 is more than twice as large as 1.13.
(d) P(5,2.3): True, since 5 is at least twice as large as 2.3.
(e) P(24,12): True, since 24 is at least twice as large as 12.
(f) P(3.14,2.71): True, since 3.14 is at least twice as large as 2.71.
(g) P(100,1000): False, since 100 is not at least twice as large as 1000.
(h) P(3,6): False, since 3 is not at least twice as large as 6.
(i) P(1,1): False, since 1 is not at least twice as large as 1.
(j) P(45%,22.5%): False, since the statement does not make sense for percentages and is not well-defined.
Learn more about Truth values :https://brainly.com/question/2046280
#SPJ11
a flight engineer for an airline flies an average of 2,923 miles per week. which is the best estimate of the number of miles she flies in 3 years?
A flight engineer for an airline flies an average of 2,923 miles per week. Si, 455,388 miles is the best estimate of the number of miles she flies in 3 years.
Given: The average miles flown per week is 2,923 miles.
To find: The best estimate of the number of miles she flies in 3 years.
We know that in a year there are 52 weeks.
Therefore, the total number of miles flown in a year will be the product of the average miles flown per week and the number of weeks in a year.
So, Number of miles flown per year = 2,923 × 52= 151,796 miles
Therefore, the total number of miles flown in 3 years will be:
Number of miles flown in 3 years = 151,796 × 3= 455,388 miles
Thus, the best estimate of the number of miles she flies in 3 years is 455,388 miles.
To learn more about miles
https://brainly.com/question/13151389
#SPJ11
Consider the binary operation a*b = ab on Q\{0}. Show that * is associative and commutative. What is the identity element for *?
Let's say we have binary operation defined on a group. To show that * is associative and commutative we have to satisfy two conditions: Associative law: $a * (b * c) = (a * b) * c$ Commutative law: $a * b = b * a$ Now consider the binary operation a * b = ab on Q{0}.a * (b * c) = a * (bc) = a(bc) = (ab)c = (a * b) * c
Therefore, * is associative. a * b = ab and b * a = ba = ab Therefore, * is also commutative. Identitiy element: Identity element is such that a * e = e * a = a. If we take e = 1 then: a * e = a * 1 = a Therefore, 1 is the identity element for the binary operation a * b = ab on Q{0}.
A parallel activity or dyadic activity is a standard for consolidating two components to create another component. Formally, an operation of arity two is referred to as a binary operation.
Learn more about binary operation:
https://brainly.com/question/30666019
#SPJ2
Assume Noah Co has the following purchases of inventory during their first month of operations
First Purchase
Second Purchase
Number of Units
130
451
Cost per unit
3.1 3.5
Assuming Noah Co sells 303 units at $14 each, what is the ending dollar balance in inventory if they use FIFO?
The ending dollar balance in inventory, using the FIFO method, is $973.
The cost of each sold unit must be tracked according to the sequence of the unit's purchase if we are to use the FIFO (First-In, First-Out) approach to calculate the ending dollar balance in inventory.
Let's begin by utilizing the FIFO approach to get COGS or the cost of goods sold. In order to attain the total number of units sold, we first sell the units from the earliest purchase (First Purchase) before moving on to the units from the second purchase (Second Purchase).
First Purchase:
Number of Units: 130
Cost per unit: $3.1
Second Purchase:
Number of Units: 451
Cost per unit: $3.5
We compute the cost based on the cost per unit from the First Purchase until we reach the total amount sold to estimate the cost of goods sold (COGS) for the 303 units sold:
Units sold from First Purchase: 130 units
COGS from First Purchase: 130 units × $3.1 = $403
Units remaining to be sold: 303 - 130 = 173 units
Units sold from Second Purchase: 173 units
COGS from Second Purchase: 173 units × $3.5 = $605.5
Total COGS = COGS from First Purchase + COGS from Second Purchase
Total COGS = $403 + $605.5 = $1,008.5
To calculate the ending dollar balance in inventory, we need to subtract the COGS from the total cost of inventory.
Total cost of inventory = (Quantity of First Purchase × Cost per unit) + (Quantity of Second Purchase × Cost per unit)
Total cost of inventory = (130 units × $3.1) + (451 units × $3.5)
Total cost of inventory = $403 + $1,578.5 = $1,981.5
Ending dollar balance in inventory = Total cost of inventory - COGS
Ending dollar balance in inventory = $1,981.5 - $1,008.5 = $973
Therefore, the ending dollar balance in inventory, using the FIFO method, is $973.
To learn more about inventory, refer to:
https://brainly.com/question/25947903
#SPJ4
Find the consumer's surplus at the market equilibrium point given that the demand function is p= 100 - 18x and the supply function is p = a +2.
To find the consumer's surplus at the market equilibrium point, we need to determine the equilibrium price and quantity by setting the demand and supply functions equal to each other. Then, we can calculate the area of the triangle below the demand curve and above the equilibrium price.
The equilibrium occurs when the quantity demanded equals the quantity supplied. By setting the demand and supply functions equal to each other, we can solve for the equilibrium price:
100 - 18x = a + 2
Simplifying the equation, we have:
18x = 98 - a
x = (98 - a)/18
Substituting this value of x into either the demand or supply function will give us the equilibrium price. Let's use the demand function:
p = 100 - 18x
p = 100 - 18((98 - a)/18)
p = 100 - (98 - a)
p = 2 + a
So, the equilibrium price is 2 + a.
To calculate the consumer's surplus, we need to find the area of the triangle below the demand curve and above the equilibrium price. The formula for the area of a triangle is 0.5 * base * height. In this case, the base is the quantity and the height is the difference between the equilibrium price and the price given by the demand function. Thus, the consumer's surplus is given by:
Consumer's Surplus = 0.5 * (98 - a) * [(100 - 2) - (2 + a)]
Simplifying further, we get the expression for the consumer's surplus at the market equilibrium point.
Learn more about curve here:
https://brainly.com/question/28793630
#SPJ11
Find the least element of each of the following sets, if there is one. If there is no least element, enter "none". a. {n e N:n2 – 5 2 4}. b. {n € N: n2 – 9 € N} c. {n2 +4:n € N} d. {n EN:n= k + 4 for some k e N}. = Let A = {1, 4, 6, 13, 15} and B = {1,6,13}. How many sets C have the property that C C A and B CC. = = Let A = {2 EN:4
(a) The set {n ∈ ℕ : n^2 - 5 ≤ 2} contains all natural numbers n such that n^2 ≤ 7. The smallest natural number whose square is greater than 7 is 3, so the least element of the set is 1.
(b) The set {n ∈ ℕ : n^2 - 9 ∈ ℕ} contains all natural numbers n such that n^2 is a multiple of 9. The smallest natural number whose square is a multiple of 9 is 3, so the least element of the set is 3.
(c) The set {n^2 + 4 : n ∈ ℕ} contains all natural numbers of the form n^2 + 4 for some natural number n. Since n^2 is always non-negative, the smallest possible value of n^2 + 4 is 4 (when n = 0), so the least element of the set is 4.
(d) The set {n ∈ ℕ : n = k + 4 for some k ∈ ℕ} is the set of natural numbers that are 4 more than some natural number. Since there is no smallest natural number, there is no least element in this set.
(e) To find the number of sets C that satisfy C ⊆ A and B ⊆ C, we need to count the number of subsets of A that contain B. The set B has 3 elements, and each element of B is also in A. Therefore, any subset of A that contains B must contain 3 elements. We can choose any 3 elements from A, so there are (5 choose 3) = 10 such subsets.
(f) The set A is defined as the set of all even numbers that are not multiples of 4. We can write A as A = {2n : n ∈ ℕ, n is odd}. The set B is defined as the set of all multiples of 4 that are greater than or equal to 2. We can write B as B = {4n : n ∈ ℕ, n ≥ 1}.
To find the intersection of A and B, we need to find the even numbers that are not multiples of 4 and are also greater than or equal to 2. The only such even number is 2. Therefore, A ∩ B = {2}.
To find the cardinality of A ∩ B, we count the number of elements in the set, which is 1. Therefore, |A ∩ B| = 1.
Learn more about Cardinality :https://brainly.com/question/23976339
#SPJ11
(a) Suppose n = 5 and the sample correlation coefficient is r=0.896. Is r significant at the 1% level of significance (based on a two-tailed test)? (Round your answers to three decimal places.) I USE SALT critical t = Conclusion: O Yes, the correlation coefficient p is significantly different from 0 at the 0.01 level of significance. O No, the correlation coefficient p is not significantly different from 0 at the 0.01 level of significance. (b) Suppose n = 10 and the sample correlation coefficient is r= 0.896. Is r significant at the 1% level of significance (based on a two-tailed test)? (Round your answers to three decimal places.) critical t = Conclusion: Yes, the correlation coefficient p is significantly different from 0 at the 0.01 level of significance. O No, the correlation coefficient p is not significantly different from 0 at the 0.01 level of significance. appear that sample size plays an important role in determining the significance of a correlation coefficient? Explain. (c) Explain why the test results of parts (a) and (b) are different even though the sample correlation coefficient r = 0.896 is the same in both parts. Does As n increases, so do the degrees of freedom, and the test statistic. This produces a smaller P value. O As n increases, the degrees of freedom and the test statistic decrease. This produces a smaller P value. O As n decreases, the degrees of freedom and the test statistic increase. This produces a smaller P value. O As n increases, so do the degrees of freedom, and the test statistic. This produces a larger P value.
(a) The critical t-value for a two-tailed test at the 1% level of significance with 3 degrees of freedom is greater than the absolute value of the calculated t-value. (b) The correlation coefficient of 0.896 is still significant at the 1% level of significance. (c) The test results of parts (a) and (b) can potentially be different due to the change in sample size (n).
(a) For a sample size of 5, the critical t-value for a two-tailed test at the 1% level of significance with 3 degrees of freedom is greater than the absolute value of the calculated t-value. This indicates that the correlation coefficient of 0.896 is significantly different from 0 at the 1% level of significance.
(b) As the sample size increases to 10, the degrees of freedom and the test statistic also increase. With more data points, the test becomes more sensitive and precise in detecting significant relationships. This leads to a smaller p-value, indicating a stronger level of significance for the correlation coefficient.
In summary, the test results differ between the two scenarios due to the change in sample size. Larger sample sizes provide more reliable and robust estimates of the population, resulting in increased statistical power and greater sensitivity to detecting significant correlations.
(c) Increasing the sample size affects the degrees of freedom (df) and the test statistic. As the sample size increases, the degrees of freedom increase. This means there are more data points available to estimate the population parameters, resulting in a larger sample.
With more data, the test statistic becomes more precise and provides a more accurate assessment of the true correlation in the population.
Additionally, as the degrees of freedom increase, the critical t-value decreases. This is because a larger sample size allows for greater precision and narrower confidence intervals. As a result, it becomes harder to reject the null hypothesis and find a significant correlation.
Therefore, as n increases, the degrees of freedom and the test statistic increase, leading to a smaller p-value and a higher likelihood of finding a significant correlation.
Learn more about correlation coefficient:
brainly.com/question/29978658
#SPJ11
Consider the function y = 2x + 2 between the limits of x= 2 and x= 7
Find the arclength L of this curve:
L=_________-
The arc length (L) of the curve y = 2x + 2 between x = 2 and x = 7 is 10√5.
To track down the circular segment length (L) of the bend characterized by the capability y = 2x + 2 between the constraints of x = 2 and x = 7, we can involve the equation for curve length in Cartesian directions.
We can determine the length of a curve that runs between two points using the arc length formula, which is represented by the integral of (1 + (dy/dx)2) dx.
For this situation, the subordinate of y = 2x + 2 concerning x is 2, and that implies (dy/dx) = 2. When we put this into the equation, we get:
L = ∫(2) √(1 + (2)²) dx
= ∫2 √(1 + 4) dx
= ∫2 √5 dx
= 2√5 ∫dx
= 2√5 * x + C
Assessing the fundamental between x = 2 and x = 7 gives:
The arc length (L) of the curve y = 2x + 2 between x = 2 and x = 7 is 105, as L = 25 * (7 - 2) = 25 * 5 = 105.
To know more about equation refer to
https://brainly.com/question/29538993
#SPJ11
How many solutions does the following system of linear equations have?
2x-3y = 4
4x - 6y = 8
The given system of linear equations; 2x-3y = 4, 4x - 6y = 8 has infinitely many solutions.
To determine the number of solutions the system of linear equations has, we can analyze the equations using the concept of linear dependence.
Let's rewrite the system of equations in standard form:
2x - 3y = 4 ...(1)
4x - 6y = 8 ...(2)
We can simplify equation (2) by dividing it by 2:
2x - 3y = 4 ...(1)
2x - 3y = 4 ...(2')
As we can see, equations (1) and (2') are identical. They represent the same line in the xy-plane. When two equations represent the same line, it means that they are linearly dependent.
Linearly dependent equations have an infinite number of solutions, as any point on the line represented by the equations satisfies both equations simultaneously.
To know more about system of linear equations refer here:
https://brainly.com/question/20379472#
#SPJ11
find the area under y = 2x on [0, 3] in the first quadrant. explain your method.
The area under the curve y = 2x on the interval [0, 3] in the first quadrant is 9 square units.
To find the area under the curve y = 2x on the interval [0, 3] in the first quadrant, we can use the definite integral.
The integral of a function represents the signed area between the curve and the x-axis over a given interval. In this case, we want to find the area in the first quadrant, so we only consider the positive values of the function.
The integral of the function y = 2x with respect to x is given by:
∫[0, 3] 2x dx
To evaluate this integral, we can use the power rule of integration, which states that the integral of x^n with respect to x is (1/(n+1)) * x^(n+1).
Applying the power rule, we integrate 2x as follows:
∫[0, 3] 2x dx = (2/2) * x^2 | [0, 3]
Evaluating this definite integral at the upper limit (3) and lower limit (0), we have:
(2/2) * 3^2 - (2/2) * 0^2 = (2/2) * 9 - (2/2) * 0 = 9 - 0 = 9
Therefore, the area under the curve y = 2x on the interval [0, 3] in the first quadrant is 9 square units.
Visit here to learn more about area brainly.com/question/1631786
#SPJ11
The Fibonacci sequence is defined as follows: F0 = 0, F1 = 1 and for n larger than 1, FN+1 = FN + FN-1. Set up a spreadsheet to compute the Fibonacci sequence. Show that for large N, the ratio of successive Fibonacci numbers approaches the Golden Ratio (1.61).
For large N, the ratio of successive Fibonacci numbers approaches the Golden Ratio (1.61).
Here is the spreadsheet that computes the Fibonacci sequence:1.
Firstly, we'll create a new spreadsheet and in cell A1, we'll write "0" and in cell A2, we'll write "1".2. In cell A3, we'll use the formula "=A1+A2".3. After that, we'll copy cell A3 and paste it into the cells A4 to A20.4.
Now, if you look at the values in column A, you can see the Fibonacci sequence being generated.5. In order to show that for large N, the ratio of successive Fibonacci numbers approaches the Golden Ratio (1.61), we need to calculate the ratio of each number to its predecessor.6. In cell B3, we'll write the formula "=A3/A2" and we'll copy it to cells B4 to B20.7.
Finally, we'll take the average of the values in column B, which should approach the Golden Ratio (1.61) as N gets larger. We can do this by writing the formula "=AVERAGE(B3:B20)" in cell B21 and pressing Enter.
In conclusion, the Fibonacci sequence was computed using a spreadsheet. The ratio of successive Fibonacci numbers approaches the Golden Ratio (1.61) as N gets larger.
The spreadsheet can be used to calculate the Fibonacci sequence for any value of N.
The formulae were used to achieve the results. The results were computed and values were entered into cells as stated in steps 1-7 above.
The average of the values in column B was used to calculate the Golden Ratio and it was shown that the ratio of successive Fibonacci numbers approaches the Golden Ratio (1.61) as N gets larger.
Know more about Fibonacci sequence here,
https://brainly.com/question/29764204
#SPJ11
how do you calculate the total multiplier for a finite distributed lag model where x is the number of lags?
The total multiplier is calculated by summing the coefficients of the distributed lag model. The coefficients represent the weight of each lag, and the sum of the weights represents the total effect of the independent variable on the dependent variable.
A finite distributed lag model is a model in which the effect of an independent variable on a dependent variable is spread out over a period of time. The model is represented by the following equation:
y_t = α + β_1 x_t + β_2 x_{t-1} + ... + β_x x_{t-x} + u_t
where:
y_t is the dependent variable at time t
x_t is the independent variable at time t
α is the constant term
β_1, β_2, ..., β_x are the coefficients of the distributed lag model
u_t is the error term
The total multiplier is calculated by summing the coefficients of the distributed lag model. The coefficients represent the weight of each lag, and the sum of the weights represents the total effect of the independent variable on the dependent variable.
For example, if the distributed lag model has 3 lags and the coefficients are 0.5, 0.3, and 0.2, then the total multiplier would be 1.0. This means that a unit change in the independent variable would lead to a 1 unit change in the dependent variable, with 0.5 of the effect occurring immediately, 0.3 of the effect occurring in the next period, and 0.2 of the effect occurring in the second period.
Learn more about model here:
brainly.com/question/32214884
#SPJ11
1An insurance company wants to know if the average speed at which men drive cars is higher than that of women drivers. The company took a random sample of 27 cars driven by men on a highway and found the mean speed to be 72 miles per hour with a standard deviation of 2.2 miles per hour. Another sample of 18 cars driven by women on the same highway gave a mean speed of 68 miles per hour with a standard deviation of 2.5 miles per hour. Assume that the speeds at which all men and all women drive cars on this highway are both approximately normally distributed with unknown and unequal population standard deviations.
a. Construct a 98% confidence interval for the difference between the mean speeds of cars driven by all men and all women on this highway.
b. Test at a 1% significance level whether the mean speed of cars driven by all men drivers on this highway is higher than that of cars driven by all women drivers.
c. Suppose that the sample standard deviations were 1.9 and 3.4 miles per hour, respectively. Redo parts a and b. Discuss any changes in the results
we can conclude that there is sufficient evidence to suggest that the mean speed of cars driven by all men drivers on this highway is higher than that of cars driven by all women drivers.
a. Confidence interval for the difference between the mean speeds of cars driven by all men and all women on this highway is given by:
Confidence Interval = [tex]\bar x_m - \bar x_w ± z*(\frac{{s_m}^2}{m}+\frac{{s_w}^2}{n})^{1/2}[/tex]
Here, [tex]\bar x_m[/tex] = 72 miles per hour,[tex]s_m[/tex]= 2.2 miles per hour, m = 27, [tex]\bar x_w[/tex]= 68 miles per hour, [tex]s_w[/tex]= 2.5 miles per hour and n = 18.
Using the formula for a 98% confidence interval, the values of z = 2.33.
Thus, the confidence interval is calculated below:
Confidence Interval = 72 - 68 ± 2.33 * [tex](\frac{{2.2}^2}{27} + \frac{{2.5}^2}{18})^{1/2}[/tex]
= 4 ± 2.37
= [1.63, 6.37]
Thus, the 98% confidence interval for the difference between the mean speeds of cars driven by all men and all women on this highway is (1.63, 6.37).
b. The null and alternative hypotheses are:
Null Hypothesis:
[tex]H0: \bar x_m - \bar x_w ≤ 0[/tex] (Mean speed of cars driven by men is less than or equal to that of cars driven by women)
Alternative Hypothesis:
H1: [tex]\bar x_m - \bar x_w[/tex] > 0 (Mean speed of cars driven by men is greater than that of cars driven by women)
Test Statistic: Under the null hypothesis, the test statistic t is given by:
t =[tex](\bar x_m - \bar x_w - D)/S_p[/tex]
(D is the hypothesized difference in population means,
[tex]S_p[/tex] is the pooled standard error).
[tex]S_p = ((s_m^2 / m) + (s_w^2 / n))^0.5[/tex]
= [tex]((2.2^2 / 27) + (2.5^2 / 18))^0.5[/tex]
= 0.7106
t = (72 - 68 - 0)/0.7106
= 5.65
Using a significance level of 1%, the critical value of t is 2.60, since we have degrees of freedom (df) = 41
(calculated using the formula df = [tex]\frac{(s_m^2 / m + s_w^2 / n)^2}{\frac{(s_m^2 / m)^2}{m - 1} + \frac{(s_w^2 / n)^2}{n - 1}}[/tex], which is rounded down to the nearest whole number).
Thus, since the calculated value of t (5.65) is greater than the critical value of t (2.60), we can reject the null hypothesis at the 1% level of significance.
Hence, we can conclude that there is sufficient evidence to suggest that the mean speed of cars driven by all men drivers on this highway is higher than that of cars driven by all women drivers.
c. For this part, the only change is in the sample standard deviation for women drivers.
The new values are [tex]\bar x_m[/tex] = 72 miles per hour, [tex]s_m[/tex] = 1.9 miles per hour, m = 27, [tex]\bar x_w[/tex] = 68 miles per hour, [tex]s_w[/tex] = 3.4 miles per hour, and n = 18.
Using the same formula for the 98% confidence interval, the confidence interval becomes:
Confidence Interval = [tex]72 - 68 ± 2.33 * (\frac{{1.9}^2}{27} + \frac{{3.4}^2}{18})^{1/2}[/tex]
= 4 ± 2.83
= [1.17, 6.83]
Thus, the 98% confidence interval for the difference between the mean speeds of cars driven by all men and all women on this highway is (1.17, 6.83).
The null and alternative hypotheses for part b remain the same as in part a.
The test statistic t is given by:
t = [tex](\bar x_m - \bar x_w - D)/S_pS_p[/tex]
= [tex]((s_m^2 / m) + (s_w^2 / n))^0.5[/tex]
= [tex]((1.9^2 / 27) + (3.4^2 / 18))^0.5[/tex]
= 1.2565
t = (72 - 68 - 0)/1.2565
= 3.18
Using a significance level of 1%, the critical value of t is 2.60 (df = 41).
Since the calculated value of t (3.18) is greater than the critical value of t (2.60), we can reject the null hypothesis at the 1% level of significance.
To know more about Confidence interval visit
https://brainly.com/question/20309162
#SPJ11