Select the correct answer.
Which two factors does the power of a machine depend on?
Α. work and distance
B. force and distance
C. work and time
D. time and distance
Answers
Answer: C. work and time
Explanation: hope this helps
Related Questions
Question 6 (14 points)
A 3.68 kg object is tied to the end of a cord and whirled in a horizontal circle of radius 881 cm. The object completes 10.8 revolutions every 18.8
s. What is the centripetal acceleration of the object?
Answers
Answer:
[tex]a=114\ m/s^2[/tex]
Explanation:
Given that,
Mass of an object, m = 3.68 kg
It is whirled in a horizontal circle of radius 881 cm or 8.81 m
The object completes 10.8 revolutions every 18.8 s.
We need to find the centripetal acceleration of the object. It is given by the formula as follows :
[tex]a=\omega^2 r[/tex] ...(1)
Where [tex]\omega[/tex] is angular velocity
10.8 revolutions = 67.85 rad
[tex]\omega=\dfrac{67.85\ rad}{18.8\ s}\\\\=3.6\ rad/s[/tex]
Put values in equation (1)
[tex]a=3.6^2\times 8.81\\\\a=114\ m/s^2[/tex]
So, the centripetal acceleration of the object is [tex]114\ m/s^2[/tex].
How can we use magnetic fields to transport objects from one location to another?
Answers
A sky diver with a mass of 80 kg jumps from a plan. They are accelerating at a constant rate due to gravity which is 9.8 m/s2. What is the net Force of the sky diver? Show your work.
Answers
Answer:
At terminal velocity, the drag force = mass x g
Explanation:
Force = 80 kg x 9.8 m/s2 = 784 kgm/s2 = 784 N
THIS IS SOOO IMPORTANT PLS HELP I’LL GIVE BRAINIEST
Describe the evidence of chemical changes that occurred during the etching process in:
a. your circuit board.
b. the copper chloride etching solution.
Give at least one piece of evidence for parts a & b--> Have at least one full sentence for each answer.
Answers
Answer:
Chemical etching is a process of printed circuit board (PCB) manufacturing that provides many advantages over mechanical methods.
Explanation:
There's one! UvU hope this helped in whatever you're in for! <3
Good Luck!
A box is sitting stationary on a long level ramp on level ground. The coefficient of static friction is (1.0). One end of the ramp is slowly lifted higher and higher. What is the angle of the ramp with respect to the ground when the box begins slidig?
Answers
Answer:
45 degrees
Explanation:
Given that the coefficient of friction, [tex]\mu=1.0[/tex]
Let the angle of the ramp be [tex]\theta[/tex].
The gravitational force acting downward [tex]=mg[/tex]
The normal reaction by the ramp on the box, [tex]N=mg\cos\theta[/tex]
So, the maximum frictional force that can act on the box, [tex]f= \mu N[/tex]
The force along with the plane in the direction of sliding, [tex]F = mg\sin\theta[/tex]
When the box begins sliding, the F must have to overcome the frictional force,f.
So, F=f
[tex]mg\sin\theta=\mu N \\\\mg\sin\theta=\mu mg\cos\theta \\\\\frac {\sin\theta}{\cos\theta}=\mu \\\\\tan\theta=\mu \\\\\theta=\tan^{-1}\mu \\\\[/tex]
Putting the value of \mu, we have
[tex]\theta=\tan^{-1}1[/tex]
[tex]\theta=45[/tex] degrees.
Hence, the angle of the ramp with respect to the ground when the box begins sliding is 45 degrees.
A 2000 kg minivan runs into a 800 kg car that was at rest at a stop sign and they stick together. If the compact car does not stick to the van but, instead, causes the minivan to come to a complete stop. How fast will the car be going after the collision?
Answers
Answer:
v₂ = 2.5 v₁
car leaves at 2.5 times the speed of the minivan
Explanation:
This is an exercise of conservation of the momentum, to solve it we create a system formed by the minivan and the car, therefore during the crash the forces are internal and the momentum is conserved.
Initial instant. Before the crash
p₀ = M v₁+ 0
Final moment. After the crash
[tex]p_{f}[/tex] = M 0 + m v₂
how momentum is conserved
p₀ = p_{f}
M v₁ = m v₂
v₂ = [tex]\frac{M}{m}[/tex] v₁
let's calculate
v₂ = 2000/800 v₁
v₂ = 2.5 v₁
therefore the car leaves at 2.5 times the speed of the minivan
Which of the following has the largest momentum?
a. 5kg bowling ball moving with a velocity of 2m/s
b. A 4kg rock rolling down a hill with a velocity of 3m/s
c. A 200kg rock sitting on top of a hill that is 5m height.
d. 0.0025kg bullet that is moving with a velocity of 200m/s
Answers
Answer:
Option b
Explanation:
The formula of momentum is [tex]p=mv[/tex]
where p is the momentum , m is the mass in kg and v is the velocity in m/s, so
a) momentum is
[tex]p=mv\\p=5(2)\\p=10[/tex]
b) momentum is
[tex]p=mv\\p=4(3)\\p=12[/tex]
c) momentum is
here since the rock is sitting on top of a hill which means the object is stationary or in other words the object is at rest, which means if an object is at rest the velocity is 0m/s so momentum is zero of a stationary object because
[tex]p=mv\\p=200(0)\\p=0[/tex]
d) momentum is
[tex]p=mv\\p=0.0025(200)\\p=0.5[/tex]
so the highest momentum is in part b which is 12 so option b is our answer.
Answer:
c
Explanation:
Why might it be important to know your inherited traits passed down by your parents?
Answers
Answer:
health factors that could harm you or your offspring
Jake and Amir are both standing on identical skateboards and
perform a physics experiment in which they push off one
another to move. Jake is taller and more massive than Amir. If
Jake pushes with 20 N of force, what force would he feel
backwards away from Amir? F= N
Answers
Answer: 20
Explanation:
If Jake pushes with 20 N of force, the force that he would feel backwards away from Amir is 20N
Force simply means the strength or energy that can later the position of an object. Force can also be described as a push or pull.
It should be noted that since Jake pushes with 20 N of force, the force that he would feel backwards away from Amir will be the exact force that was used in pushing.
This will therefore be 20 Newton as well.
Read related link on:
https://brainly.com/question/18038995
In physics,
is defined as a change in position over time.
a.distance
b.motion
c.momentum
d.vector
Answers
A boat travels at 15 m/s in a direction 45° east of north for an hour. The boat then turns and travels at 18 m/s in a direction 5° north of east for an hour.
Answers
Answer:
first one 31
second one 23
Explanation:
on edge ;))
An example of a poor coping mechanism is ?
Answers
Answer: A bad, maladaptive, unhealthy or destructive coping mechanism is one where the behavior does not resolve the problem in the long-term and may actually increase the harm. Unhealthy coping strategies may feel like they are having the desired effect in the short term.
Explanation: Yes, it was from google...
[tex] \frac{1}{(1 - \sqrt{3) {}^{2} } } [/tex]
Answers
Answer:
\frac{2+\sqrt{3}}{2}
Explanation:
so we simplify tthe denominator first
[tex](1-\sqrt{3})^2=[/tex][tex]4-2\sqrt{3}[/tex]
so the new fraction is:[tex]\frac{1}{4-2\sqrt{3}}[/tex]
We'll ratinalize the fraction to get: [tex]\frac{2+\sqrt{3}}{2}[/tex]
What is the speed of a rocket that travels 9,000 meters in 12 seconds?
A. 0.001 seconds
B. 750 seconds
C.750 m/s
D. 108,000 m/s
Answers
Answer:
750 m/sExplanation:
The speed of the rocket can be found by using the formula
[tex]v = \frac{d}{t} \\ [/tex]
d is the distance
t is the time taken
From the question we have
[tex]v = \frac{9000}{12} \\ [/tex]
We have the final answer as
750 m/sHope this helps you
Answer:750m/s
Explanation:I got 750m/s :D Hopefully this helped! lol
In a physics demonstration, two identical balloons (A and B) are propelled across
the room on horizontal guide wires. The motion diagrams (depicting the relative
position of the balloons at time intervals of 0.05 seconds) for these two balloons are
shown below.
Balloon A
Balloon B
Which balloon (A or B) has the greatest acceleration? Explain.
Which balloon (A or B) has the greatest final velocity? Explain.
Answers
Why was basketball invented?
Answers
In 1989 Carl Lewis established a world record when he ran the hundred meter dash in 9.92 seconds. What was his average speed (in M/S) for the race? Remember to include your data, equation, and work on solving the problem.
Answers
Answer:
10.08 m/s
Explanation:
The average speed of a body or an object can be calculated from the ratio of the total distance traveled by the body/object to that of the time taken to cover the distance.
Mathematically,
Average speed = total distance/total time
The total distance covered by Carl Lewis = 100 m
The total time taken = 9.92 s
Hence,
Average speed of Carl Lewis = 100/9.92
= 10.08 m/s
is a tree a living or non living thing?
Answers
Answer:
Living thing
Explanation:
Nonliving things do not move by themselves, grow, or reproduce.
Answer:
Living
Explanation:
Unless you cut the tree, making that thang dead- its living
A car’s momentum is p when it is traveling with a velocity of v. If the velocity of that car doubles, what is the new momentum of the car?
Answers
Answer:
∆p=(m2v)kg.m/s
Explanation:
∆p=mv where v=2v. hence ∆p=m2v
Answer:
c. 2p
Explanation:
edge 2021
The asthenosphere is a part of the upper mantle just below the lithosphere that is involved in plate tectonic movement and isostatic adjustments. Which is NOT true about the role of the asthenosphere in plate tectonics?
Answers
Complete option to the question:
A. The asthenosphere is broken up into large continental- and ocean-sized plates.
B. Convection currents within the asthenosphere push magma upward to create new crust.
C. Heat from deep within Earth is thought to keep the asthenosphere malleable.
D. The asthenosphere is the repository for parts of the lithosphere that are dragged downward in subduction zones.
Answer: The correct option is A (The asthenosphere is broken up into large continental- and ocean-sized plates.)
Explanation:
Among the components that makes up the earth crust are the lithosphere and the asthenosphere.
The LITHOSPHERE is the outer layer of the earth structure which consists of the upper part of the mantle and the crust.
The ASTHENOSPHERE is a part of the upper mantle just below the lithosphere that is involved in plate tectonic movement and isostatic adjustments. It is denser and weaker layer of the upper mantle which permits the movement of tectonic plates in the lithosphere.
The asthenosphere is the repository for parts of the lithosphere that are dragged downward in subduction zones.Heat from deep within Earth is thought to keep the asthenosphere malleable. And the convection currents within the asthenosphere push magma upward to create new crust. But it is not broken up into large continental- and ocean-sized plates.
When light is directed on a metal surface, the kinetic energies of the photoelectrons a) are random b) vary with the frequency of the light c) vary with the intensity of the light d) vary with the speed of the light
Answers
Answer:
b) vary with the frequency of the light
Explanation:
The phone electric effect can be expressed as
K.E=(hv -W•)
Where K.E is the Kinectic energy
W• = work function of the metal
ν =frequency of the radiation
h = Planck's constat
Then, we can see that K.E is proportional linearly to "v" in the equation above.
Therefore, When light is directed on a metal surface, the kinetic energies of the photoelectrons vary with the frequency of the light
If these 3 cups are sitting outside on a cold day, which cup will loose the most heat?
Answers
How long does it take to run 2000 meters if you run 2 m/s
Answers
Answer:
1000 seconds.
Explanation:
What are the two factors affect the weight of an object?
Answers
Answer:
mass and distance
Explanation:
hope this helped
How much power will it take to move a 10 kg mass at an acceleration of 2 m/s² a distance of 10 meters in 5 seconds?
Answers
Answer:
100 Watts
Explanation:
These equations are needed to work out the answer:
power= work done/ time takenwork done= force* distanceforce= mass* accelerationforce: 10 kg* 2m/s= 20
work done: 20* 10m=200
power: 200/2=100
Plz do it all plz plz and i will give brainlest and thanks to best answer do it right plz
Answers
Answer: Hawk.
Explanation: I dont know for sure, but thats what it looks like to me.
What is the Solar System?
Answers
Answer:
the collection of eight planets and their moons in orbit round the sun, together with smaller bodies in the form of asteroids, meteoroids, and comets. The planets of the solar system are (in order of distance from the sun) Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune.
Explanation:
plz follow me
What best describes the states of nonmetals when they are at room temperature?
Most nonmetals are gaseous, but some are liquid or solid.
All nonmetals are gaseous unless they bond with a metal.
Most nonmetals are solids, but some are gaseous or liquid.
All nonmetals are solid unless they bond with a metal.
Answers
Answer:
A.) Most nonmetals are gaseous, but some are liquid or solid
Explanation:
Answer:
a
Explanation:
On a sunny summer day, why does a white car with a light-colored interior stay cooler than a black car with a dark-colored interior?
Solar radiation reflects off the lighter colours, away from the car, thus keeping the car cool
Solar radiation is absorbed into the lighter colours, keeping the car cool
Solar radiation is absorbed into the darker colours, keeping the car cool
Solar radiation reflects off the darker colours, away from the car, thus keeping the car cool
Answers
Answer: Solar radiation reflects off the lighter colours, away from the car, thus keeping the car cool
Explanation: This is because lighter colors reflect a good amount of radiation while darker colors absorb it. Just like, Antarctica hasn't completely melted because it reflects a lot of the heat that is acting upon it. Or, you notice that you get hotter when you wear a black shirt opposed to a white one.
Which of the following would be an example of mechanical energy?
Elastic Energy, Kinetic Energy, Gravitational Potential Energy
Gravitational Potential Energy, Thermal Energy
Electric Potential Energy, Nuclear Energy, Kinetic Energy
Magnetic Energy, Elastic Potential Energy
Answers
Answer:
A) Elastic Energy, Kinetic Energy, and Gravitational Potential Energy
Explanation:
Hope this helps!