Answer:
12m/s
Explanation:
60/5=12
Answer:
Explanation:
Solution,
Distance(d)=60m
Time(t)=5sec
Now,
A.speed=d/t
A.speed=60/5=12m/s
Aluminum can be made into foil because aluminum has high?
Answer:
Aluminum can be made into foil because aluminum has high ductile.
Explanation:
Answer:
Because it is highly ductile
The mass of a large car is 1000 kg. How much force would be required to accelerate the car at a rate of 3msec2
Answer:
3000 N
Explanation:
We have,
• Mass, m = 1000 kg
• Acceleration, a = 3 m/s²
We have to find force required, F.
[tex]\longrightarrow[/tex] F = ma
[tex]\longrightarrow[/tex] F = 1000 × 3 N
[tex]\longrightarrow[/tex] F = 3000 N (Answer)
•If the car and truck collided, which
direction would the two cars move. Be
sure to explain your answer in terms of
momentum.
Answer:
The cars would both move in the direction with the greatest momentum. We know the truck would have the greatest momentum due to having the greatest mass. Plus, factors which affects momentum are mass and velocity.
Thus, the car would move forward towards the direction of momentum of the truck. Both will continue to move at the same velocity.
E.g. truck hits the back of a stationary car, both will move forward, to the right & travelling at the same speed, but lower than the initial velocity of the truck. Now the total the total momentum before the collision is the same as the total momentum after the collision; as a result, momentum has been conserved.
Hope this helps!
Do loud sounds travel faster than soft sounds?
Answer: No. Both travel at the same speed.
Explanation:
Answer: no, they all travel at the same speed
Explanation: the amplitude of a sound does not matter for all sound travels at the same speed
A gravitational force of 2.54 x 10^-10 is exerted by two objects that are 0.25 m apart. If the first object has a mass of 0.35 kg, what is the mass of the second object?
Answer :
what is the answer options?
Explanation:
In practice, it will take longer than a electric kettle to boil the water in a normal kettle. Explain why.
Please answer correctly..
Please help !!
Will give the brainliest !!!
Explanation:
electric kettle works so quickly is by using a relatively large electric current.
The amount of heat produced is proportional to the current squared,
so bigger currents produce much more
heat—and heat things much more
quickly—than smaller ones.
Water in an electric kettle boils much faster when compared to normal kettle mainly because of two reasons :-
(•) In normal kettle, heat is supplied directly onto the kettle's base. As it is cold in nature, it takes time for the kettle base to be heated and then only the heat passes through water.
On the other hand, in electric kettle, the electric current wave passes directly through the water, hence it takes less time to heat the water.
(•) Water is a good absorber of electric current, but is a poor absorber of heat. Consider if it takes 2 minutes for electric to pass through water, then it will take 9 minutes for the heat to pass through water.
It is due to these major reasons to why water boils faster in electric kettle than in normal kettle.
--------------------★---------------
If you have any doubts regarding the answer, feel free to ask it in comments !
Hope this answer's your query ...
2. Two spherical objects have masses of 1.5 x 109 kg and 8.5 x 10 kg. Their centers are
separated by a distance of 2500 m. Find the gravitational attraction between them.
music=life=love=GOD
GOD is MUSIC
Explanation:I hope this helps. Not with your mathematical issue. Maybe watch Good Will Hunting?
LOL
God Bless brother. I hope you get it. It takes hard work.
b.
Why does the moon turn red during a lunar eclipse?.
Answer:
The moon is turning red because being that the moon doesn't have any light of it's own, the Earth moves between the Sun and the moon, disrupting the light supply for the Moon.
If the sum of all the forces acting on a car is zero, then the speed of the car?
Answer: If all forces acting on a car are zero, than the cars speed is zero since there are no forces to push or pull the car :)
Explanation:
what is the relationship between wavelength and frequency ?
Answer: inverse relationship
Explanation: one increases and the other decreases
When an object has a electrical charge, electrons are? _____ when it comes in contact with other objects
Globally, the winter of 2014–15 was the warmest winter on record at that time, but it sure didn’t seem that way for most of the eastern United States. This region experienced record-low temperatures and extreme snowfall, especially in the northern and coastal areas. During this period of extreme cold and snow, it was not uncommon to see comments on social media disputing climate change. For example, some commenters took pictures of huge piles of snow and added comments such as, "This doesn’t look like global warming."
Do these commenters have a point? Should extreme snowfall over the course of a season cast doubt on the theory of global climate change? Make a scientific argument explaining why you agree or disagree with these commenters.
Answer:
I need help on this to omg
Explanation:
Determine the electric potential energy for the array of three charges in the drawing, relative to its value when the charges are infinitely far away and infinitely far apart.
Although we do not have the diagram needed to answer this question, we can provide general information in that electrical potential energy is calculated based on the charges and the distance between them.
How do we calculate electric potential energy?This energy can be calculated using the value of the charges along with the distance between them with the formula Energy = [tex]k\frac{q1q2}{r}[/tex] in which q represents the charges whilst r represents the distance of separation. As we can see these values are inversely proportional to one another.
Therefore, we can confirm that we can calculate electric potential energy using the charges and the distance between them, which will be inversely proportional to one another.
To learn more about electrical energy visit:
https://brainly.com/question/863273?referrer=searchResults
if velocity is in m/s and time is in sec, what is the unit of acceleration?
Davina accelerates a box across a smooth frictionless horizontal surface over a displacement of 18. 0 m with a constant 25. 0 n force angled at 23. 0° below the horizontal. How much work does she do on the box?.
work and force
w = f cos 23 . d
w = 25 cos 23° . 18
w = 414.23 J
Think of an example from real life that can be explained with Newton's Third Law.
Answer:
when you jump, your legs apply force on the ground that applies an equal and opposite reaction that make you jump
Select the correct answer. Which term describes the ability to repay debt? A. capacity B. creditworthiness C. capability
Answer:
the answer is capacity
Explanation:
Which wire has the most total charge carriers flowing past a point in the wire during the specified time interval
The wire 2 has the most charge flowing in it at the given time interval.
Charge flowing in each wireThe total charge flowing in each wire is calculated using the following equation;
Q = It
where;
I is the currentt is the time of current flowCharge in wire 1The charge flowing in wire 1 is calculated as follows;
Q = 1 x 60 = 60 C
Charge in wire 2The charge flowing in wire 2 is calculated as follows;
Q = 2 x 45 = 90 C
Charge in wire 3The charge flowing in wire 3 is calculated as follows;
Q = 3 x 10 = 30 C
Thus, the wire 2 has the most charge flowing in it at the given time interval.
The complete question is below
The current across three identical current carrying wires is measured during a certain time interval. The reading is reported in the table
Current (A) Time Interval (S)
Wire 1 1 60
Wire 2 2 45
Wire 3 3 10
Learn more about quantity of charge in a wire here: https://brainly.com/question/25922783
brainlist nd 20 points
Answer:
I'm not sure but I think it's 35-39
if you are riding on a train that speed past another train moving in a same direction on an adjacent track ti appears that the other train is moving backward why?
Answer:
If you are traveling with a relativity constant velocity, then you will interpret your reference frame as being at rest. Since you are moving faster than the other train, the other train is moving backwards relative to you. Seeing the other train go past your window from front to rear makes it look like the train is going backwards
Explanation:
A learner has a mixture of sand and water. The best method to separate this solution would be ?
Answer:
An filtration is the answer.
What is your Momentum traveling 4 m/s with a mass of 70 kg?
Answer:
280
Explanation:
I used the equation for momentum, p=mv
70 x 4 = 280
the 20 kg at angle of 53⁰ in an inclined plane is realsed from rest the coefficient of friction bn the block and the inclined plane are ųs=0.3 and ųk=0.2
A) would the block move
B) if it moves what is its speed after it has descended a distance of 5m down the plane
Given :-
A 20kg block at an angle 53⁰ in an inclined plane is released from rest .[tex]\mu_s = 0.3 \ \& \ \mu_k = 0.2[/tex]To Find :-
Would the block move ?If it moves what is its speed after it has descended a distance of 5m down the plane .Solution :-
For figure refer to attachment .
So the block will move if the angle of the inclined plane is greater than the angle of repose . We can find it as ,
[tex]\longrightarrow \theta_{repose}= tan^{-1}(\mu_s)[/tex]
Substitute ,
[tex] \longrightarrow \theta_{repose}= tan^{-1}( 0.2)[/tex]
Solve ,
[tex]\longrightarrow\underline{\underline{\theta_{repose}= 16.6^o }}[/tex]
Hence ,
[tex]\longrightarrow\theta_{plane}>\theta_{repose}[/tex]
Hence the block will slide down .
Now assuming that block is released from the reset , it's initial velocity will be 0m/s .
And the net force will be ,
[tex]\longrightarrow F_n = mgsin53^o - \mu_k N [/tex]
Substitute, N = mgcos53⁰ ( see attachment)
[tex] \longrightarrow ma_n = mgsin53^o - \mu_k mgcos53^o [/tex]
Take m as common,
[tex] \longrightarrow\cancel{m }(a_n) = \cancel{m}( gsin53^o - \mu gcos53^o)[/tex]
Simplify ,
[tex] \longrightarrow a_n = gsin53^o - \mu_k g cos53^o[/tex]
Substitute the values of sin , cos and g ,
[tex] \longrightarrow a_n = 10( 0.79 - 0.2 (0.6)) [/tex]
Simplify ,
[tex] \longrightarrow a_n = 10 ( 0.79 - 0.12 ) \\\\ \longrightarrow a_n = 10 (0.67)\\\\ \longrightarrow \underline{\underline{a_n = 6.7 m/s^2}}[/tex]
Now using the Third equation of motion namely,
[tex] \longrightarrow2as = v^2-u^2[/tex]
Substituting the respective values,
[tex] \longrightarrow2(6.7)(5) = v^2-(0)^2 [/tex]
Simplify and solve for v ,
[tex] \longrightarrow v^2 = 67 m/s\\\\\longrightarrow v =\sqrt{67} m/s \\\\\longrightarrow\underline{\underline{ v = 8.18 m/s }} [/tex]
Hence the velocity after covering 5m is 8.18 m/s .
The conductor is initially electrically neutral, and then a charge +q is placed at the center of the hollow space. Suppose the conductor initially has a net charge of +9q instead of being neutral. What is the total charge on the interior and on the exterior surface when the +q charge is placed at the center? Please explain the answer as well..
Hi there!
If a +q charge is placed in the center of a hollow conductor, a charge of -q will be induced in the interior of the shell.
Thus, with the conservation of charge:
[tex]q_{outer} + q_{inner} = q_{total}\\\\q_{outer} - q = 9q[/tex]
Solve for the outer charge:
[tex]q_{outer} = q + 9q = 10q[/tex]
Therefore, the INTERIOR has charge -q and EXTERIOR has charge 10q.
A periodic wave has a wavelength of 2m and has a speed of 45 m/s what is the frequency
Answer:
f = 22.5 Hz
Explanation:
speed of wave = v
frequency = f
wave length = l
v = lf → f = v/l → f = 45/2 → f = 22.5 Hz
What is the relationship between the shock wave of an explosion and sound?
A certain lever has a mechanical advantage of 5.5 how heavy of a load could the lever lift with an input force of 20.0 N
Answer:110N
Explanation:
ma=f in/ f out (formula)
Input: 20.0N
Ma:5.5
Output:?
^ given information
Plug the numbers into the equation ~
5.5= 20N/?
5.5x20=110N
If a certain lever has a mechanical advantage of 5.5, then the leaver would be able to lift a load of 110 Newtons with an input force of 20.0 N
What is the mechanical advantage?Mechanical advantage is defined as a measure of the ratio of output force to input force in a system, It is used to analyze the forces in simple machines like levers and pulleys.
Mechanical advantage = output force(load) /input force (effort)
As given in the problem a certain lever has a mechanical advantage of 5.5, then we have to find out how heavy of a load could the lever lift with an input force of 20.0 N,
Mechanical advantage = output force(load) /input force (effort)
5.5 = load / 20.0 Newtons
load = 5.5 × 20
= 110 Newtons
Thus, the leaver would be able to lift a load of 110 Newtons with an input force of 20.0 N
Learn more about Mechanical advantages here, refer to the link;
brainly.com/question/16617083
#SPJ5
An object experiences a certain net force that causes a certain acceleration. If the net force on the object is
tripled, what happens to the acceleration of the object?
Answer:
it increases
Explanation:
equal to opposite force so it would return the amount applied on it
If an object experiences a certain net force that causes a certain acceleration. If the net force on the object is tripled , then the acceleration of the object would become tripled as well assuming the mass of the object is constant.
What is Newton's second law ?Newton's Second Law states that The resultant force acting on an object is proportional to the rate of change of momentum.
As given in the problem if an object experiences a certain net force that causes a certain acceleration. If the net force on the object is
tripled,
If a specific net force acting on an item results in a specific acceleration. Assuming the mass of the item remains constant if the net force acting on it is tripled, the acceleration of the object would also be tripled.
Thus, the acceleration of the object would get tripled.
To learn more about Newton's second law, refer to the link ;
brainly.com/question/13447525
#SPJ5
What type of mass movement moves the most material, averaged over the earth’s land and over long times?.
Answer:
the many, small events move the most material.
Explanation:
In a diving team, you are the team leader and you have three orientation in a trip 1-the red sea (low density) , 2-Dead sea (high density), 3-Deep lake (Pure water),which place is the best to dive in with your team.explain your opinion.
Answer:
I choose red sea, because while diving, it will be more easier if the upward force is less(upthrust). since the upthrust increase with increase with density, it will be much difficult to dive in Dead sea than red sea.
1. since red sea has less density, it would have the minimum upthrust, which results in less resistance while diving.
it is also because, the pressure inside the liquid at same depth will be less in red sea, due to its density.
PLEASE MARK BRAINLIEST.