Roger can run one mile in 9 minutes. Jeff can run one mile in 6 minutes. If Jeff gives Roger a 1 minute head start, how
long will it take before Jeff catches up to Roger? How far will each have run?
They each will have run of a mile.

Answer:

We have to multiply everything to find the amount of different possible outcomes so 3*7*8*4 = 672 unique outfits

Step-by-step explanation:

Hope this helps!

"1/49," accurately represents the result of Urvi's work.The correct answer is option D.

Urvi's work is accurate and follows the correct rule of "multiply by the reciprocal" to solve the fraction division problem.

In the given problem, she is dividing 14 by the fraction 2/7. According to the rule, to divide a fraction by another fraction, we multiply the first fraction by the reciprocal of the second fraction.

In Urvi's work, she first takes the reciprocal of 2/7, which is 7/2. Then, she multiplies 14 by the reciprocal, which gives us (14 * 7/2).

Simplifying the multiplication, we get 98/2, which simplifies further to 49. Therefore, the correct answer to the fraction division problem is 1/49.

Option D, which states "1/49," accurately represents the result of Urvi's work. This option is the most accurate description of her work because it correctly shows the final simplified fraction after applying the "multiply by the reciprocal" rule.

Overall, Urvi's work demonstrates a correct understanding and application of the rule for solving fraction division problems.

For more such questions on Urvi's,click on

https://brainly.com/question/12382709

#SPJ8

The Probable question may be:
Urvi solved a fraction division problem using the rule “multiply by the reciprocal.” Her work is shown below.

A StartFraction 14 divided by StartFraction 2 Over 7 EndFraction.

B. StartFraction 1 Over 14 EndFraction times

C. StartFraction 2 Over 7 EndFraction = StartFraction 2 Over 98

D. EndFraction or StartFraction 1 Over 49 EndFraction

Which is the most accurate description of Urvi’s work?

Answer:

? = 220°

Step-by-step explanation:

the measure of the inscribed angle QRS is half the measure of its intercepted arc QS , then

QS = ? = 2 × QRS = 2 × 110° = 220°

Given, Juan y Roberto is two brothers who play Rock, Paper, and Scissors to determine who does the cleaning in their room. The total number of possible outcomes is 3. The possible outcomes are rock, paper, and scissors. So, the probability of Juan not doing the cleaning is 1/2 or 50 percent.

The probability that Juan will not do the cleaning is 1/2 or 50 percent. The possible outcomes for playing the game Rock, paper, and Scissors are given as follows. Rock can break scissors, Paper can cover rock, and Scissors can cut paper. Therefore, there are three possible outcomes in this game. The possible outcomes are rock, paper, and scissors.

The probability that Juan will not do the cleaning is 1/2 or 50 percent since there are two possible outcomes where Juan does not do the cleaning. The two possible outcomes are paper and scissors. Juan can pick the paper or scissors to win. Therefore, the probability of Juan not doing the cleaning is 1/2 or 50 percent.

For more questions on: probability

https://brainly.com/question/30390037

#SPJ8    

A "⊂-maximal element" in set theory refers to an element in a set that cannot be strictly contained within any other element of the set, indicating a maximum extent or boundary within that set.

In the context of set theory and Tarski's notion of finiteness, a "⊂-maximal element" refers to an element within a set that cannot be strictly contained within any other element of the set. Let's break down the meaning of this term.

Consider a set S and a partial order relation ⊆ (subset relation) defined on the power set P(S) of S. A "⊂-maximal element" u of a set A ⊆ S is an element that is not strictly contained within any other element of A with respect to the subset relation. In other words, there is no element v in A such that u is a proper subset of v.

Formally, for any u ∈ A, if there is no v ∈ A such that u ⊂ v, then u is a ⊂-maximal element of A. This means that u is as large as possible within A and cannot be extended by including additional elements.

In the context of T-finite sets, the existence of a ⊂-maximal element in every nonempty subset of the set guarantees that the set has a well-defined structure and does not continue indefinitely without boundaries.

It ensures that there is a definitive maximum element within each subset, which is a key characteristic of finiteness.

For more such question on theory. visit :

https://brainly.com/question/13458417

#SPJ8

The amount of medication needed for 30 days is approximately 59.84 tablets of carprofen.

To calculate the amount of carprofen medication needed for 30 days, we need to consider the prescribed dosage, the weight of the patient, and the concentration of the tablets.

The prescribed dosage is 2.2 mg/kg BID x 30d. This means that the patient should take 2.2 milligrams of carprofen per kilogram of body weight, twice a day, for 30 days.

The weight of the patient is 34 kilograms. So, we need to calculate the total amount of carprofen needed for the entire treatment period.

First, we calculate the daily dosage by multiplying the weight of the patient (34 kg) by the prescribed dosage (2.2 mg/kg).

Daily dosage = 34 kg * 2.2 mg/kg = 74.8 mg/day.

Since the medication is prescribed twice a day, we multiply the daily dosage by 2 to get the total dosage per day.

Total dosage per day = 74.8 mg/day * 2 = 149.6 mg/day.

Finally, to find the total amount of medication needed for 30 days, we multiply the total dosage per day by the number of days.

Total medication needed = 149.6 mg/day * 30 days = 4488 mg.

Since the concentration of the tablets is 75 mg, we divide the total medication needed by the tablet concentration to find the number of tablets required.

Number of tablets needed = 4488 mg / 75 mg = 59.84.

For more such questions on carprofen,click on

https://brainly.com/question/4404995

#SPJ8

The table that shows the same function as the given graph is: A 2-column table with 4 rows. Column 1 is labeled x with entries 0, 2, 4, 6. Column 2 is labeled y with entries 4, 5, 6, 7.

To determine which table shows the same function as the given graph, we need to find the values of y corresponding to the given values of x on the graph.

Point A: (0, 4)

Point B: (2, 5)

Let's check each table:

A 2-column table with 4 rows. Column 1 is labeled x with entries 0, 2, 4, 6. Column 2 is labeled y with entries negative 8, negative 4, 0, 4.

A 2-column table with 4 rows. Column 1 is labeled x with entries 0, 2, 4, 6. Column 2 is labeled y with entries 0, 4, 0, 4.

A 2-column table with 4 rows. Column 1 is labeled x with entries 0, 2, 4, 6. Column 2 is labeled y with entries 4, 5, 6, 7.

A 2-column table with 4 rows. Column 1 is labeled x with entries 0, 2, 4, 6. Column 2 is labeled y with entries 4, 8, 12, 16.

For such more question on function:

https://brainly.com/question/11624077

#SPJ8

The derivative dy/dx of the implicit equation[tex]x - 2xy + x^2y + y = 10[/tex] is given by[tex]\frac{(2y - 2 + 2xy)}{(-2x + x^2 + 1)}[/tex]

To find the derivative dy/dx of the implicit equation [tex]x - 2xy + x^2y + y =[/tex]10, we will use the implicit differentiation technique.

Step 1: Differentiate both sides of the equation with respect to x.

For the left-hand side:

[tex]d/dx (x - 2xy + x^2y + y) = d/dx (10)[/tex]

Taking the derivative of each term separately:

[tex]d/dx (x) - d/dx (2xy) + d/dx (x^2y) + d/dx (y) = 0[/tex]

Step 2: Apply the chain rule to the terms involving y.

The chain rule states that if we have y = f(x), then dy/dx = dy/du * du/dx, where u = f(x).

For the term 2xy, we have y = f(x) = xy. Applying the chain rule, we get:

[tex]d/dx (2xy) = d/dx (2xy) * dy/dx[/tex]

= 2y + 2x * dy/dx

Similarly, for the term x^2y, we have [tex]y = f(x) = x^2y.[/tex]Applying the chain rule:

[tex]d/dx (x^2y) = d/dx (x^2y) * \frac{dx}{dy} \\= 2xy + x^2 * \frac{dx}{dy}[/tex]

Step 3: Substitute the derivatives back into the equation.

[tex]d/dx (x) - (2y + 2x * dy/dx) + (2xy + x^2 * dy/dx) + d/dx (y) = 0[/tex]

Simplifying the equation:

[tex]1 - 2y - 2x * \frac{dx}{dy} + 2xy + x^2 * \frac{dx}{dy} + \frac{dx}{dy} = 0[/tex]

Step 4: Group the terms involving dy/dx together and solve for dy/dx.

Combining the terms involving dy/dx:

[tex]-2x * \frac{dx}{dy} + x^2 * \frac{dx}{dy} + dy/dx = 2y - 1 + 2xy - 1[/tex]

Factoring out dy/dx:

[tex](-2x + x^2 + 1) * \frac{dx}{dy} = 2y - 1 + 2xy - 1[/tex]

[tex]dy/dx = \frac{(2y - 2 + 2xy)}{(-2x + x^2 + 1)}[/tex]

For more suvh questions on derivative visit:

https://brainly.com/question/23819325

SPJ8

Answer:

To evaluate the expression when a = 5 and b = 1, we substitute the values into the expression:

12 + 2(4(5)²) ÷ 7 + 8

= 12 + 2(4 * 25) ÷ 7 + 8 (Note: 5² means 5 raised to the power of 2)

= 12 + 2(100) ÷ 7 + 8 (Note: 4 * 25 = 100)

= 12 + 200 ÷ 7 + 8

= 12 + 28.57 + 8 (Note: ÷ means divide)

= 48.57

To plot the resulting value on the provided number line , we would need to know the scale and range of the number line. Without this information, we cannot accurately plot the value.

Step-by-step explanation:

Answer:

Third option

Step-by-step explanation:

-3(2x - 5) < 5(2 - x)

-6x + 15 < 10 - 5x <-- Third option

15 < 10 + x

5 < x

x > 5

There only appears to be one option. The solution to the inequality is x>5, not x<5.

The correct answer is an option (d): Impossible.

Both the geometric mean and harmonic mean require positive values. However, in the given set of values, we have negative values (-11 and -14), which makes it impossible to calculate the geometric mean and harmonic mean. Therefore, the correct answer is that it is impossible to calculate the geometric mean and harmonic mean for the given values.

The correct expression that is equivalent to (f + g) (4) is: f(4) + g(4).

The expression (f + g) (4) represents the sum of two functions, f(x) and g(x), evaluated at x = 4. To find the equivalent expression, we need to simplify it.

In (f + g) (4), the parentheses indicate that the addition operation is performed first, adding the functions f(x) and g(x) together. Then, the resulting sum is evaluated at x = 4. So, the expression simplifies to f(4) + g(4), where we substitute x with 4 in both functions.

The other options provided:

• ¡(4) + g(4): This option is not correct because the negation operator (!) applied to a value does not make sense in this context.

• f(x) + g(4): This option is not correct because it does not evaluate the sum of the functions at x = 4; it keeps the variable x in the expression.

• ¡(4 + g(4)): This option is not correct because it applies the negation operator to the sum of 4 and g(4), which is not equivalent to (f + g) (4).

• 4(f(x) + g(x)): This option is not correct because it introduces a constant factor of 4 to the sum of the functions, which is not equivalent to (f + g) (4).

The correct expression equivalent to (f + g) (4) is f(4) + g(4).

For more such questions on expression

https://brainly.com/question/723406

#SPJ8

This option is not equivalent to (f + g)(4).

The expression (f + g)(4) specifically represents the sum of functions f and g evaluated at x = 4.

To determine which expression is equivalent to (f + g)(4), let's break it down step by step.

The expression (f + g)(4) represents the value obtained by evaluating the sum of functions f and g at x = 4.

We substitute x = 4 into both functions and then add the results.

Let's evaluate each option to see which one matches this process:

¡(4) + g(4):

This option involves evaluating the function f at x = 4 and adding it to the value obtained by evaluating function g at x = 4.

It does not represent the sum of the functions f and g evaluated at x = 4.

This option is not equivalent to (f + g)(4).

f(x) + g(4):

This option involves adding the value of function f at an arbitrary point x to the value obtained by evaluating function g at x = 4.

It does not specifically represent the sum of functions f and g evaluated at x = 4.

This option is not equivalent to (f + g)(4).

¡(4 + g(4)):

This option involves evaluating the function g at x = 4 and adding it to the value obtained by adding 4 to the result.

It does not represent the sum of functions f and g evaluated at x = 4.

This option is not equivalent to (f + g)(4).

4(f(x) + g(x)):

This option involves evaluating the functions f and g at an arbitrary point x, summing the results and then multiplying the sum by 4.

It does not specifically represent the sum of functions f and g evaluated at x = 4.

None of the given options is equivalent to (f + g)(4).

For similar questions on equivalent

https://brainly.com/question/29754038
#SPJ8

The sum of the two time durations is 7 hours, 46 minutes, and 37 seconds.

To add the given time durations, we start by adding the seconds:

12 sec + 25 sec = 37 sec.

Since 60 seconds make a minute, we carry over any excess seconds to the minutes place, which gives us a total of 37 seconds. Moving on to the minutes, we add 30 min + 16 min = 46 min.

Again, we carry over any excess minutes to the hours place, resulting in a total of 46 minutes.

Finally, we add the hours: 5 hr + 2 hr = 7 hr.

Thus, the sum of the two time durations is 7 hours, 46 minutes, and 37 seconds.

for such more question on time

https://brainly.com/question/23377525

#SPJ8

Answer:

to solve the equation you first need to bring it to factors and by doing that you first need to let the equation equal 0 hence you need to minus 2 on both sides of the equation therefore

x^2 + 10x + 25 - 2 =2 - 2

therefore

x^2 + 10x +23 = 0

now since the equation cannot be factored, we use the formula.

x= [tex]\frac{-b +- \sqrt{b^{2}-4ac } }{2a}[/tex]

where

a=1

b=10

c=23

note we use the coefficients only.

therefore x = [tex]\frac{-10 -+ \sqrt{10^{2}-4(1)(23) } }{2(1)}[/tex]

=[tex]\frac{-10-+\sqrt{100-92} }{2}[/tex]

=[tex]\frac{-10-+\sqrt{8} }{2}[/tex]

then we form two equations according to negative and positive symbols

x=[tex]\frac{-10+\sqrt{8} }{2} or x =\frac{-10-\sqrt{8} }{2}[/tex]

therefore x = [tex]-5+\sqrt{2}[/tex]   or x=[tex]-5-\sqrt{2}[/tex]

(a) The amount for total expenditures in 2015 was about $63.2 billion.

(b) The first full year in which expenditures exceeded $110 billion was 2027.

(a) To find the amount for total expenditures in 2015, we need to substitute x = 20 into the function h(x) = [tex]23.4(1.08)^{(x-5)[/tex].

h(x) = 23.4(1.0[tex]8)^{(20-5)[/tex]

    = 23.4(1.0[tex]8)^{15[/tex]

    ≈ 23.4(2.717)

Rounding to the nearest tenth, the total expenditures in 2015 were about $63.2 billion.

(b) To determine the first full year in which expenditures exceeded $110 billion, we need to find the value of x when h(x) is greater than $110 billion.

110 = 23.4(1.0[tex]8)^{(x-5)[/tex]

Dividing both sides by 23.4:

4.7008547... = (1.0[tex]8)^{(x-5)[/tex]

Taking the logarithm base 1.08 of both sides:

log₁.₀₈(4.7008547...) = x - 5

Using a logarithm calculator or software, we find:

x - 5 ≈ 11.75

Adding 5 to both sides:

x ≈ 16.75

Rounding to the nearest whole number, the first full year in which expenditures exceeded $110 billion was 2027.

For more such questions on amount, click on:

https://brainly.com/question/24644930

#SPJ8

The fraction of the container needed to fill up the gas tank of the lawn mower four times is 6/12. Option D.

The shaded part of the circle represents the fraction of gas needed to fill up the gas tank of the lawn mower once. To determine the fraction needed to fill it up four times, we can simply multiply the fraction by 4.

Let's assume that the shaded part of the circle represents x part of the whole container. Therefore, the fraction needed to fill up the gas tank of the lawn mower once is x.

To fill up the gas tank four times, we need to multiply x by 4. Therefore, the fraction needed to fill up the gas tank four times is 4x.

Now, we can compare this to the answer choices given:

8/48: This can be simplified to 1/6, which is not equal to 4x.

8/12: This can be simplified to 2/3, which is not equal to 4x.

6/16: This can be simplified to 3/8, which is not equal to 4x.

6/12: This can be simplified to 1/2, which is equal to 4x.

Therefore, the correct answer is 6/12, which represents the fraction of the container needed to fill up the gas tank of the lawn mower four times. so Option D is correct.

For more question on fraction visit:

https://brainly.com/question/17220365

#SPJ8

Note the complete question is

The statistical questions for this problem are given as follows:

A question is classified as statistical if it can receive answers of data that vary, that is, questions that do not have an exact answer.

When the answer is exact, it must be composed by a set of data, such as the number of students that like football in each school, the number will vary for each school.

More can be learned about statistical questions at brainly.com/question/22334957

#SPJ1

By applying the algebraic identity, the expression (24)³ - (13)³ - (11)³ can be simplified as (11)(1057) - (11)³ = 10396, without actually calculating the cubes.

The expression (24)³ - (13)³ - (11)³ can be evaluated without calculating the cubes by applying the concept of algebraic identities.

By using the identity (a³ - b³) = (a - b)(a² + ab + b²), we can rewrite the expression as (24 - 13)(24² + 24*13 + 13²) - (11)³.

Simplifying further, we have (11)(576 + 312 + 169) - (11)³.

Combining like terms, the expression evaluates to (11)(1057) - (11)³.

Finally, we can simplify to obtain the result of 11 multiplied by 1057 minus 11 cubed, without actually calculating the cubes. The simplified expression (24)³ - (13)³ - (11)³ evaluates to 10396.

Learn more about Evaluation without Calculating Cubes on:

https://brainly.com/question/18040006

#SPJ1

Answer:

27

Step-by-step explanation:

The statement "rank(AB) = n" is not always true for invertible n by n matrices A and B with rank(A) = rank(B) = n.

Counterexample:

Consider the following counterexample:

[tex]A = \begin{bmatrix} 1 & 0 \ 0 & 1 \end{bmatrix}\\B = \begin{bmatrix} 1 & 0 \ 0 & 0 \end{bmatrix}[/tex]

Both matrices A and B are invertible, as they are both identity matrices. However, when we multiply them together, we get:

[tex]AB = \begin{bmatrix} 1 & 0 \ 0 & 0 \end{bmatrix}[/tex]

The rank of AB is 1, not n. In this case, n = 2, but rank(AB) = 1. Therefore, the statement "rank(AB) = n" is not always true for all invertible n by n matrices A and B with rank(A) = rank(B) = n.

In general, the rank of the product AB is less than or equal to the minimum of the ranks of A and B. So, in order for rank(AB) to be equal to n, both A and B need to have rank n individually, but that does not guarantee the rank of their product to be n as well.

For more such questions on matrices

https://brainly.com/question/29223307

#SPJ8

Answer:

y = π/3

Step-by-step explanation:

To find the value of y, we can use the trigonometric identity for the sum of angles:

sin(x + y) = sin x * cos y + cos x * sin y

Comparing this with the given equation:

sin(x + y) = 1/2(sin x) + √3/2(cos x)

We can equate the corresponding terms:

sin x * cos y = 1/2(sin x) ----(1)

cos x * sin y = √3/2(cos x) ----(2)

From equation (1), we can see that cos y = 1/2.

From equation (2), we can see that sin y = √3/2.

To determine the values of y, we can use the trigonometric values of cosine and sine in the first quadrant of the unit circle.

In the first quadrant, cos y is positive, so cos y = 1/2 corresponds to y = π/3 (60 degrees).

Similarly, sin y is positive, so sin y = √3/2 corresponds to y = π/3 (60 degrees).

Therefore, the value of y is y = π/3 (or 60 degrees).

Answer:

[tex]\displaystyle \pi\biggr(1-\frac{1}{e}\biggr)[/tex]

Step-by-step explanation:

Shell Method (Vertical Axis)

[tex]\displaystyle V=2\pi\int^b_ar(x)h(x)\,dx[/tex]

Radius: [tex]r(x)=x[/tex]

Height: [tex]h(x)=e^{-x^2}[/tex]

Bounds: [tex][a,b]=[0,1][/tex]

Set up and evaluate integral

[tex]\displaystyle V=2\pi\int^1_0xe^{-x^2}\,dx[/tex]

[tex]\displaystyle V= -\frac{1}{2}\cdot2\pi\int^{-1}_0e^u\,du\\\\V= -\pi\int^{-1}_0e^u\,du\\\\V=\pi\int^0_{-1}e^u\,du\\\\V=\pi e^u\biggr|^0_{-1}\\\\V=\pi e^0-\pi e^{-1}\\\\V=\pi-\frac{\pi}{e}\\\\V=\pi\biggr(1-\frac{1}{e}\biggr)[/tex]

The strength of the correlation as shown in the scatter plot can be concluded to be: b) no correlation.

To estimate the strength of the correlation in a scatter plot, visually assess the clustering and linearity of the data points. If the points cluster tightly around a linear trend, it indicates a strong correlation, whereas dispersed and non-linear points suggest a weak correlation.

However, if the points on a scatter plot do not exhibit a discernible pattern (as shown in the image given above), it can be concluded that there is no correlation between the variables being plotted.

Therefore, the answer is: b. no correlation.

Learn more about correlation on:

https://brainly.com/question/13879362

#SPJ1

Answer:

(a)  $556 billion

(b)  $581 billion

(c)  $693 billion

Step-by-step explanation:

The given function is:

[tex]\boxed{A(x)=314e^{0.044x}}[/tex]

where A(x) is the assets (in billions of dollars) for a financial firm .

If x = 7 corresponds to the year 2007 then:

Therefore, to find the assets for each of the given years, substitute the corresponding value of x into the function.

[tex]\begin{aligned}A(13)&=314e^{0.044 \cdot 13}\\&=314e^{0.572}\\&=314(1.77180712...)\\&=556.34743707...\\&=556\; \sf (nearest\;billion)\end{aligned}[/tex]

[tex]\begin{aligned}A(14)&=314e^{0.044 \cdot 14}\\&=314e^{0.616}\\&=314(1.851507181...)\\&=581.3732549...\\&=581\; \sf (nearest\;billion)\end{aligned}[/tex]

[tex]\begin{aligned}A(18)&=314e^{0.044 \cdot 18}\\&=314e^{0.792}\\&=314(2.20780762...\\&=693.2515954...\\&=693\; \sf (nearest\;billion)\end{aligned}[/tex]

To find the experimental probability of rolling a number greater than 10, we need to determine the frequency of rolling a number greater than 10 and divide it by the total number of rolls.

Looking at the table, we can see that the frequency for rolling a number greater than 10 is the sum of the frequencies for rolling 11 and 12.

Frequency for rolling a number greater than 10 = Frequency of 11 + Frequency of 12

Frequency for rolling a number greater than 10 = 15 + 17 = 32

The total number of rolls is given as 200.

Experimental Probability of rolling a number greater than 10 = Frequency for rolling a number greater than 10 / Total number of rolls

Experimental Probability of rolling a number greater than 10 = 32 / 200

Experimental Probability of rolling a number greater than 10 = 0.16 or 16%

Therefore, the experimental probability of rolling a number greater than 10 is 16%.

Hopes this helps you out :)

The money raised by Lucas for the fundraiser is $30.

The bars sold on Saturday are 12 bars. Each bar costs $1.50.

So, the amount will be:  12 * 1.50 = 18

The bars sold on Sunday are  8 bars.

So, the amount will be:  8 * 1.50 = 12

Hence, the total amount: is 18+12= 30

The exponential decay function that satisfies the given conditions is:

[tex]f(x) = 4 * (1/2)^x[/tex].

In this equation, the y-intercept is 4, which means that when x = 0, the function value is 4. As x increases by 1, the function decreases by a factor of one-half. This behavior is captured by raising 1/2 to the power of x in the equation.

The base of the exponent, 1/2, ensures that the function decreases exponentially. When x = 1, the exponent becomes 1, and[tex]1/2^1[/tex] equals 1/2. This means that the function value decreases to half of its previous value. Similarly, when x = 2, the exponent becomes 2, and[tex]1/2^2[/tex] equals 1/4. The function value decreases to one-fourth of its previous value, and so on.

By multiplying the exponential term by 4, we ensure that the y-intercept is 4. This scaling factor allows us to control the initial value of the function and match the given condition.

The exponential decay function[tex]f(x) = 4 * (1/2)^x[/tex] represents a decaying process where the y-values decrease exponentially as x increases, while starting at a y-intercept of 4.

For more such questions on exponential decay function

https://brainly.com/question/12139640

#SPJ8

Answer:

Part A: Answer: D.

Part B:

true

false

true

Step-by-step explanation:

Part A:

Use a tree.

Round 1                 Round 2                   Round 3

W                               W                                W

W                               W                                L

W                               L                                 W

W                                L                                 L

L                                 W                               W

L                                 W                               L

L                                 L                                W

L                                 L                                L

All possibilities are:

WWW, WWL, WLW, WLL, LWW, LWL, LLW, LLL

Answer: d.

Part B:

Winning 3 games is WWW.

WWW, WWL, WLW, WLL, LWW, LWL, LLW, LLL

Out of the 8 possible outcomes shown above, only 1 of them is WWW.

p(WWW) = 1/8

Answer: true

Winning exactly 2 games happens when there are exactly 2 W's:

WWW, WWL, WLW, WLL, LWW, LWL, LLW, LLL

p(exactly 2 wins) = 3/8

Answer: false

Wining at least 2 games means winning exactly 2 or exactly 3 times.

WWW, WWL, WLW, WLL, LWW, LWL, LLW, LLL

p(winning at least 2 games) = 4/8 = 1/2

Answer: true