.Rank these systems in order of decreasing entropy.
Rank from highest to lowest entropy. To rank items as equivalent, overlap them
1 mol of methane gas at 273 K and 40 L 1 mol of helium gas at 273 K and 20 L 1/2 mol of liquid helium at 100K 1 mol of helium gas at 273 K and 40 L 1 mol of hydrogen gas at 273 K and 40 L 1/2 mol of helium gas at 100 K and 20 L 1/2 mol of helium gas at 273 K and 20 L Greatest entropy Least entropy

The equilibrium Sr2+ is 0.15 M.

The chemical reaction that occurs when 50 ml of 0.600 M Sr(NO3)2 reacts with 50 ml of 1.60 M KIO3 is: 2 Sr(NO3)2 + 2 KIO3 → Sr(IO3)2 + 2 KNO3From this balanced equation, it can be seen that 2 moles of Sr(NO3)2 produce 1 mole of Sr(IO3)2.

Therefore, moles of Sr(NO3)2 present initially = 0.600 × 0.050 = 0.03 mol Moles of KIO3 present initially = 1.60 × 0.050 = 0.08 mol

Since the ratio of moles of Sr(IO3)2 to Sr(NO3)2 is 1:2, therefore moles of Sr(IO3)2 formed = 0.03 / 2 = 0.015 mol

The final volume of the mixture is 50 + 50 = 100 ml

Number of moles of Sr(IO3)2 in 100 ml solution = 0.015 mol

Molarity of Sr(IO3)2 = (Number of moles of Sr(IO3)2) / (Volume of solution in L) = (0.015 mol) / (0.100 L) = 0.15 M

Therefore, the equilibrium Sr2+ is 0.15 M.

Know more about equilibrium :

https://brainly.com/question/30325987

#SPJ11

The equilibrium Sr²⁺ concentration in the solution will be approximately 0.600 mol/L.

To calculate the equilibrium Sr²⁺ concentration in the solution, we need to determine whether a precipitation reaction occurs between Sr(NO₃)₂ and KIO₃, and if so, how much Sr²⁺ precipitates.

The balanced chemical equation for the precipitation reaction between Sr(NO₃)₂ and KIO₃ is;

2Sr(NO₃)₂ + KIO₃ → Sr(IO₃)₂ + 2KNO₃

We can see that for every 2 moles of Sr(NO₃)₂, 1 mole of Sr(IO₃)₂ precipitates.

First, let's calculate the moles of Sr(NO₃)₂ and KIO3 in the solution;

Moles of Sr(NO₃)₂ = Volume (L) × Concentration (M)

= 0.050 L × 0.600 M

= 0.030 mol

Moles of KIO₃ = Volume (L) × Concentration (M)

= 0.050 L × 1.60 M

= 0.080 mol

From the balanced equation, we can see that the limiting reagent is Sr(NO₃)₂ because it has fewer moles than KIO₃.

Since 2 moles of Sr(IO₃)₂ precipitate for every 2 moles of Sr(NO₃)₂, we can conclude that all the Sr(NO₃)₂ will react and form Sr(IO₃)₂.

Now, let's calculate the concentration of Sr²⁺ ions in the solution after the reaction:

The total volume of the solution is 50.0 mL + 50.0 mL = 0.100 L

Since 2 moles of Sr(NO₃)₂ give 2 moles of Sr²⁺ ions, and we have 0.030 mol ofSr(NO₃)₂;

Concentration of Sr²⁺ ions = Moles of Sr²⁺ ions/Volume of the solution

= (2 × 0.030 mol) / 0.100 L

= 0.600 M

Therefore, the equilibrium Sr²⁺ concentration in the solution is 0.600 mol/L.

To know more about precipitation reaction here

https://brainly.com/question/29762381

#SPJ4

--The given question is incomplete, the complete question is

"A solution is prepared by mixing 50.0 mL of 0.600 M Sr(NO₃)₂ with 50.0 mL of 1.60 M KIO₃. Calculate the equilibrium Sr²⁺ concentration in mol/L for this solution. Ksp for Sr(IO₃)₂ = 2.30E-13."--

Given that the mole fraction of O2 in the air is 0.21, the total pressure is 0.83 atm, and Henry's law constant (kH) for O2 in water is 1.3 x 10-3 M/atm, the solubility of O2 in water can be calculated to be 2.7 x 10⁻⁴ M.

According to Henry's law, the solubility of a gas (in this case, O2) in a liquid (water) is given by the equation: C = kH * P, Where: C is the concentration of the gas in the liquid (solubility),kH is Henry's law constant for the specific gas, P is the partial pressure of the gas. Given that the mole fraction of O2 in the air is 0.21, we can calculate the partial pressure of O2 in the air as follows: PO2 = XO2 * PT, Where: PO2 is the partial pressure of O2, XO2 is the mole fraction of O2 in air, PT is the total pressure. Substituting the given values, we have PO2 = 0.21 * 0.83 atm = 0.17343 atm. Now, we can calculate the solubility of O2 in water using Henry's law: C = kH * P = (1.3 x 10-3 M/atm) * (0.17343 atm) ≈ 2.7 x 10⁻⁴ M.

To learn more about Henry's law, click here: brainly.com/question/30636760

#SPJ11

One of the two acidic amino acids is aspartic acid. As generic acids in enzyme active sites, aspartic and glutamic acids are crucial for preserving proteins' solubility and ionic nature and aspartic acid.

Thus, The charged amino acids are primarily responsible for the buffering characteristics of proteins, which are important for preserving the body's pH balance in the serum.

A carboxylic acid group is substituted for one of the hydrogens in alanine to create aspartic acid. A polypeptide's aspartic acid's carboxyl group has a pKa of around 4.0.

A pyruvate is the -keto homolog of alanine, so too does aspartic acid have a -keto homolog in oxaloacetate. A straightforward transamination reaction can interconvert aspartic acid and oxaloacetate.

Thus, One of the two acidic amino acids is aspartic acid. As generic acids in enzyme active sites, aspartic and glutamic acids are crucial for preserving proteins' solubility and ionic nature and aspartic acid.

Learn  more about aspartic acid, refer to the link:
https://brainly.com/question/9379332

#SPJ4

To make aspartic acid via reductive amination, we must start with an amine and an aldehyde or ketone.

In this case an amine compound, such as ammonia [tex](NH_3)[/tex], and an aldehyde or ketone chemical would be used.

The following describes the structure of an organic chemical that can be used to make aspartic acid via reductive amination.

[tex]H_2N-CO-CH_2-CH_2-COOH[/tex]

2-Aminobutanedioic acid, also known as -aminosuccinic acid, is the name of this substance. Aspartic acid can be made via reductive amination by reducing the chemical's carbonyl group (C=O) using a reducing agent such as sodium borohydride[tex](NaBH_4)[/tex] and reacting it with ammonia.

Learn more about reductive amination, here:

https://brainly.com/question/14207331

#SPJ4

The required correct answer is AlCl3

Explanation: According to Coulomb's law, the ionic compound with the largest electrostatic potential energy is the compound having the largest magnitude.

Electrostatic potential energy (EPE) of ionic compounds is calculated by the Coulomb's law equation which states that:EPE ∝ (Q1 × Q2) / rwhere,Q1 and Q2 are the charges of two ionic particles.r is the distance between the two ionic particles.The larger the values of Q1 and Q2, the larger will be the EPE of the compound.

Now, looking at the given compounds:

CaCl2 has two charges of 1- and 2+, thus Q1 and Q2 values are both

Calculating the EPE of CaCl2 we get;EPE of CaCl2 = (1 × 2) / (1.5 × 10⁻¹⁰) = 1.33 × 10¹⁰ J/mol

AlCl3 has three charges of 1- and 3+, thus Q1 and Q2 values are both

Calculating the EPE of AlCl3 we get;EPE of AlCl3 = (1 × 3) / (1.5 × 10⁻¹⁰) = 2.00 × 10¹⁰ J/mol

CoCl2 has two charges of 1- and 2+, thus Q1 and Q2 values are both

Calculating the EPE of CoCl2 we get;EPE of CoCl2 = (1 × 2) / (1.5 × 10⁻¹⁰) = 1.33 × 10¹⁰ J/mol

Therefore, AlCl3 has the largest magnitude of EPE of 2.00 × 10¹⁰ J/mol as compared to the other ionic compounds CaCl2 and CoCl2. Hence, the ionic compound AlCl3 has the largest electrostatic potential energy among the given compounds.

Learn more about electrostatic potential energy here https://brainly.in/question/19615914

#SPJ11

The upper bound for the specific stiffness of this composite is 25.36 x 10^6 N/m3.

Upper and lower bounds for an Al2O3 particle - Al matrix composite E(Al)-69 GPa, E(AlbO3)-380 GPa, Volume fraction(Al)-0.40The rule of mixtures is a tool that is used to estimate the properties of composites. This rule is based on the following equation:Em=E1V1+E2V2Where, E is the modulus of elasticity, V is the volume fraction, and the subscripts 1 and 2 denote the individual phases. For this case, we have two phases: Al and Al2O3 particles.To find the upper and lower bounds, we'll use the following equation:Em=V1E1+V2E2Lower bound:Em = 0.4(69) + 0.6(380) = 243 GPaUpper bound:Em = 0.6(69) + 0.4(380) = 177 GPab) Calculate the upper bound for the specific stiffness of this composite.p(Al)-2.71 g/cm3, pAl2O3 3.98 g/cm3Specific stiffness is defined as the ratio of the elastic modulus to density.Specific stiffness, E/ρ = Em/Vm, where Vm is the total volume and can be calculated as:Vm = V1 + V2 = 0.4 + 0.6 = 1.E/ρ= Em/VmSo the upper bound is:E/ρ=177/((0.4 x 2.71) + (0.6 x 3.98))=25.36 x 10^6 N/m3Ans: The upper bound for the specific stiffness of this composite is 25.36 x 10^6 N/m3.

Learn more about stiffness here:

https://brainly.com/question/31172851

#SPJ11

The complete order of increasing electronegativity is:Be < B < Li < Na < Ca < S < Se < Cl

Electronegativity is the tendency of an atom to attract the electrons of a covalent bond towards itself. It can be arranged using a periodic table by determining the groups and periods. The trend is the increase of electronegativity from left to right and bottom to top. The elements that are further from each other in the periodic table will have a higher electronegativity.Here's how to arrange the following elements in order of increasing electronegativity:Li < Na < CaFor B, Be, Li, it is arranged as: Be < B < LiFor S, Se, Cl, it is arranged as: S < Se < ClSo, the complete order of increasing electronegativity is:Be < B < Li < Na < Ca < S < Se < Cl.

Learn more about electronegativity here:

https://brainly.com/question/3393418

#SPJ11

The enthalpy change when 8.50 L of ozone at a pressure of 1.00 atm and 25°C reacts with 12.00 L of nitric oxide at the same initial pressure and temperature is -277.5 kJ/mol.

The enthalpy change when 8.50 L of ozone at a pressure of 1.00 atm and 25°C reacts with 12.00 L of nitric oxide at the same initial pressure and temperature can be calculated by the given equation. The balanced equation for the reaction is:2O3(g) + 2NO(g) → 2NO2(g) + 3O2(g)The enthalpy change for the given reaction can be determined using Hess’s law. Hess’s law states that the enthalpy change of a reaction is independent of the route taken, provided that the initial and final conditions are the same.

Since the given reaction can be expressed as a sum of a series of known reactions, Hess’s law can be used to calculate the enthalpy change.Using the given data, the enthalpy change for the reaction can be calculated as follows:δH° = 2 × [ΔH°f(NO2(g))] + 3 × [ΔH°f(O2(g))] - 2 × [ΔH°f(O3(g))] - 2 × [ΔH°f(NO(g))]δH° = 2 × [33.85 kJ/mol] + 3 × [0 kJ/mol] - 2 × [142.2 kJ/mol] - 2 × [90.4 kJ/mol]δH° = - 277.5 kJ/mol

To know more about enthalpy change visit:-

https://brainly.com/question/28039996

#SPJ11

Answer:

The new volume will be 8.2 x 10⁻³ L or 0.0082 L.

Explanation:

Since our temperature remains constant, apply Boyle's Law:

P₁V₁ = P₂V₂

Plug in the initial pressure and volume on the left side, and the new pressure on the right:

9.9(1.033) = 1245(V₂)

V₂ = (9.9(1.033)) / 1245

V₂ = 8.2 x 10⁻³ L or 0.0082 L

a. ΔG>0 - 4. Q < K - This match indicates that if the change in Gibbs free energy (ΔG) for a reaction is greater than zero, it implies that the reaction is not at equilibrium.

a. ΔG>0 - 4. Q < K

b. ΔG<ΔG∘ - 1. Q > K

c. equilibrium - 5. Q = K

d. K=0 - Not applicable

e. ΔG>ΔG∘ - 2. Q > 1

f. standard state - Not applicable

g. ΔG<0 - 6. Q < 1

a. ΔG>0 - 4. Q < K

This match indicates that if the change in Gibbs free energy (ΔG) for a reaction is greater than zero, it implies that the reaction is not at equilibrium. In terms of the reaction quotient (Q) and the equilibrium constant (K), if Q is less than K, it means the reaction is not yet at equilibrium. This is because the ratio of the concentrations of the reactants and products, as represented by Q, is smaller than the equilibrium constant K, indicating that the reaction has not reached a state of equilibrium.

b. ΔG<ΔG∘ - 1. Q > K

When the change in Gibbs free energy (ΔG) for a reaction is less than the standard Gibbs free energy change (ΔG∘), it implies that the reaction is spontaneous in the forward direction. In terms of Q and K, if Q is greater than K, it means that the reaction has proceeded further than the equilibrium position, indicating that the reaction is spontaneous in the forward direction.

c. equilibrium - 5. Q = K

At equilibrium, the reaction quotient (Q) is equal to the equilibrium constant (K). This means that the concentrations of the reactants and products in the reaction have reached a balance, and there is no net change in the system over time.

d. K=0 - Not applicable

This label does not have a corresponding match. K=0 would indicate that the equilibrium constant is zero, which is not a valid scenario as equilibrium constants are always positive values.

e. ΔG>ΔG∘ - 2. Q > 1

When the change in Gibbs free energy (ΔG) for a reaction is greater than the standard Gibbs free energy change (ΔG∘), it indicates that the reaction is non-spontaneous in the forward direction. In terms of Q and K, if Q is greater than 1, it means that the reaction has proceeded further in the forward direction than it would be at equilibrium, indicating that the reaction is non-spontaneous in the forward direction.

f. standard state - Not applicable

This label does not have a corresponding match in the given options.

g. ΔG<0 - 6. Q < 1

If the change in Gibbs free energy (ΔG) for a reaction is less than zero, it implies that the reaction is spontaneous in the forward direction. In terms of Q and K, if Q is less than 1, it means that the reaction has not proceeded as far as it would be at equilibrium, indicating that the reaction is spontaneous in the forward direction.

The correct question is:

Match the following (a-g with 1.-6).  Note: not all labels will be used.

a. ΔG>0,

b. ΔG<ΔG∘

c. equilibrium

d. K=0

e. ΔG>ΔG∘

f. standard state

g. ΔG<0

1. Q > K

2. Q > 1

3. Q = 1

4. Q < K

5. Q = K

6. Q < 1

To know more about Gibbs free energy (ΔG) follow the link:

https://brainly.com/question/30870882

#SPJ4

1. The type of polymer that would you obtain if sorbitol is a polyol.

2a. The use of starch-borate and starch-glycerol polymers for the encapsulation of pharmaceutical drugs or pesticides would have a number of beneficial effects.

2b. Yes, these polymers are considered to be biodegradable.

1. The type of polymer that would you obtain if sorbitol (a sugar alcohol found in sugar-free gum) was used as a plasticizer additive is a polyol. This is because sorbitol is a polyol, which is a substance used to modify the properties of polymers. The process of polymer modification involves adding polyols to the polymer matrix, which helps to reduce the glass transition temperature of the polymer. Sorbitol can be used as a plasticizer addictive because it is a natural and non-toxic compound that is biodegradable.

2a. The use of starch-borate and starch-glycerol polymers for the encapsulation of pharmaceutical drugs or pesticides would have a number of beneficial effects. These polymers are natural and non-toxic, and they are biodegradable, which means that they do not pose a risk to the environment. Additionally, they can be used to modify the properties of the drugs or pesticides, making them more effective and reducing their toxicity.

2b. Yes, these polymers are considered to be biodegradable. This is because they are made from natural materials that can be broken down by biological processes. Starch-borate and starch-glycerol polymers are particularly attractive for use in biodegradable materials because they are non-toxic and biocompatible. They can be used in a variety of applications, including packaging materials, agricultural films, and medical devices, where their biodegradability is an important factor.

To know more about polyol visit:

https://brainly.com/question/32067095

#SPJ11

The minimum number of atoms that could be contained in the unit cell of an element with a body-centered cubic (BCC) lattice is 2 atoms.

In a body-centered cubic lattice, each corner of the cube is occupied by one atom, and there is an additional atom at the center of the cube. This arrangement gives rise to a total of 2 atoms per unit cell.

The corner atoms are shared between adjacent unit cells, contributing 1/8th of an atom to each cell, while the atom at the center is fully contained within the unit cell.

Therefore, the minimum number of atoms in the unit cell of a BCC lattice is 2.

To learn more about unit cell here brainly.com/question/13110055

#SPJ11

The correct option is (d.) Amino Acid Analysis. While a valuable technique for amino acid composition analysis, is not a colorimetric method for protein quantitation.

Amino Acid Analysis is not a colorimetric method for protein quantitation. It is a technique used to determine the composition and concentration of amino acids in a protein sample, but it does not rely on colorimetric reactions to quantify the protein content.

The other options listed (a. Biuret Test, b. Folin-Ciocalteu (Lowry) Assay, c. Bradford Assay, and e. Bicinchoninic Acid (BCA) Assay) are all colorimetric methods commonly used for protein quantitation.

Amino Acid Analysis, while a valuable technique for amino acid composition analysis, is not a colorimetric method for protein quantitation. The other methods mentioned are commonly used for protein quantitation and rely on colorimetric reactions to measure protein concentration.

To know more about colorimetric , visit:

https://brainly.com/question/30227806

#SPJ11

Answer:

D. 18g

Explanation:

To get the answer, we will use an equation to convert the grams of C2H5OH to moles of C2H5OH, then I will convert the moles of C2H5OH to moles of CO2, and then I will convert the moles of CO2 to grams of CO2.

9.2g C2H5OH / 46.07g C2H5OH = 0.199 mol C2H5OH

0.199 mol C2H5OH (2 mol CO2 / 1 mol C2H5OH) = 0.398 mol CO2

0.398 mol CO2 (44.01g CO2 / 1 mol CO2) = 17.515g CO2

The answer closest to our answer is answer choice D. 18g

Therefore, the answer is D

In normal temperatures, carbon dioxide is a colorless, non-flammable gas, its calculated value is "18 gram".

Equation:

[tex]\to \bold{C_2H_5OH\ (l)+3O_2\ (g) \to 2CO_2\ (g)+3H_2O\ (g)}[/tex]

In the above-given scenario, We'll utilize an equation that converts grams of ethanol to moles of ethanol, then converts moles of ethanol to moles of carbon dioxide, and finally, transforms the moles of carbon dioxide into grams of carbon dioxide to get the result.

Following are the calculation of the conversion of carbon dioxide:

[tex]\to \frac{9.2\ g\ C_2H_5OH }{46.07\ g\ C_2H_5OH} = 0.199\ mol C_2H_5OH\\\\\to 0.199\ mol\ C_2H_5OH \ (\frac{2\ mol\ CO_2}{ 1\ mol\ C_2H_5OH}) = 0.398\ mol\ CO_2\\\\\to 0.398\ mol \ CO_2 \ (\frac{44.01\ g\ CO_2}{1 \ mol\ CO_2}) = 17.515\ g\ CO_2 \approx 18\ g \ CO_2\\\\[/tex]

Therefore, the answer is "Option D".

Find out more about the CO2 here:

brainly.com/question/867804

The reaction between magnesium ribbon and dilute hydrochloric acid results in the formation of magnesium chloride and the release of hydrogen gas.

When a piece of magnesium ribbon is dropped into dilute hydrochloric acid (HCl), a chemical reaction occurs, resulting in the formation of magnesium chloride (MgCl2) and the release of hydrogen gas (H2). This reaction can be represented by the following balanced chemical equation:

Mg + 2HCl → MgCl2 + H2

In this reaction, the magnesium (Mg) reacts with the hydrochloric acid (HCl). The magnesium atoms lose two electrons to form Mg2+ ions, while the hydrogen ions (H+) from the hydrochloric acid gain these electrons to form hydrogen gas molecules (H2). The chlorine ions (Cl-) from the hydrochloric acid combine with the magnesium ions to form magnesium chloride.

The reaction is exothermic, meaning it releases heat energy. As the magnesium ribbon reacts with the hydrochloric acid, you may observe effervescence, as bubbles of hydrogen gas are released. The solution may also become warmer due to the exothermic nature of the reaction.

For more such questions on magnesium ribbon visit:

https://brainly.com/question/23259866

#SPJ8

a) The Cation Exchange Capacity, CEC, of the soil is 16 cmolc.

b) The aluminum saturation of the soil is approximately 18.75%.

(a) The CEC (Cation Exchange Capacity) of the soil is calculated from the sum of the exchangeable cations present in the soil.

CEC = Ca²⁺ + Mg²⁺ + K⁺ + Al³⁺

CEC = 9 cmolc + 3 cmolc + 1 cmolc + 3 cmolc

CEC = 16 cmolc

(b) To calculate the aluminum saturation of the soil, we need to determine the percentage of the CEC occupied by Al³⁺ ions.

Aluminum Saturation = (Al³⁺ / CEC) * 100

Aluminum Saturation = (3 cmolc / 16 cmolc) * 100

Aluminum Saturation ≈ 18.75%

Learn more about cation exchange capacity at: https://brainly.com/question/30689981

#SPJ4

0.10 moles per liter solution of the conjugate base sodium acetate is likely to have a pH greater than 7.

When acetic acid (CH3COOH) donates a proton, it forms its conjugate base, acetate ion (CH3COO-). In the given scenario, the acetic acid solution has a pH of 2.87, indicating acidity. The lower pH value suggests a higher concentration of H+ ions. As a weak acid, acetic acid partially dissociates, releasing H+ ions and acetate ions. When sodium acetate (CH3COONa) dissolves in water, it completely dissociates into sodium ions (Na+) and acetate ions. The presence of acetate ions (the conjugate base) from sodium acetate will react with the excess H+ ions in the solution, shifting the equilibrium towards the formation of acetic acid and water. This process, called the hydrolysis of salts, will consume the H+ ions, thereby increasing the pH of the solution. Consequently, the 0.10 mole per liter solution of sodium acetate is likely to have a pH greater than 7, making it basic.

Learn more about pH

brainly.com/question/2288405

#SPJ11

In 0.750 moles of aluminum oxide (Al2O3), there are 2.25 moles of O2- ions. This is determined by the balanced chemical equation for the formation of aluminum oxide, which states that for every 1 mole of Al2O3, there are 3 moles of O2- ions.

By using a simple mole-to-mole conversion, we can calculate the number of moles of O2- ions present. Thus, with 0.750 moles of Al2O3, multiplying by the ratio of 3 moles O2- ions to 1 mole Al2O3 yields 2.25 moles of O2- ions. To determine the number of moles of O2- ions in 0.750 moles of aluminum oxide (Al2O3), we need to consider the balanced chemical equation for the formation of aluminum oxide. The formula for aluminum oxide indicates that for every 1 mole of Al2O3, there are 3 moles of O2- ions. Therefore, if we have 0.750 moles of Al2O3, we can calculate the number of moles of O2- ions as follows:

0.750 moles Al2O3 × (3 moles O2- ions / 1 mole Al2O3) = 2.25 moles O2- ions

Therefore, there are 2.25 moles of O2- ions in 0.750 moles of aluminum oxide, Al2O3.

Learn more about moles here : brainly.com/question/30885025
#SPJ11

In order to combine the cations listed in the left column with the corresponding anions listed on the top row to make a neutral compound in the box where the two meet, we need to cross-multiply the charges of the cation and anion so that the total charge equals zero.

This is because in order for a compound to be neutral, it must have a total charge of zero.

For example, if we have sodium cation and chloride anion, we can cross-multiply their charges so that the total charge is zero. Na+ has a charge of +1 and Cl- has a charge of -1, so we can combine them to form NaCl, which is a neutral compound with a total charge of zero.

Similarly, we can combine other cations and anions in the same way to form neutral compounds. For instance, we can combine (magnesium cation) and (sulfate anion) to form MgSO₄, which is a neutral compound with a total charge of zero.

Overall, to form a neutral compound from cations and anions, we need to cross-multiply their charges so that the total charge equals zero. We can then write the resulting compound in the box where the two meet.

To know more about neutral compound click on below link:

https://brainly.com/question/30308505#

#SPJ11

In both cases, the change in pH is 0.18 because the amount of HCl or NaOH added is equal to the buffer capacity of the buffer solution.

The buffer solution is a weak base-weak acid buffer. The pH of a buffer solution is given by the Henderson-Hasselbalch equation:

pH = pKa + log([A⁻]/[HA])

where:

pH = pH of the solution

pKa = negative logarithm of the acid dissociation constant

[A⁻] = concentration of the conjugate base

[HA] = concentration of the acid

The pKa of ammonia is 9.25. The concentration of ammonia is 0.100 M and the concentration of ammonium chloride is 0.100 M.

Substituting these values into the Henderson-Hasselbalch equation:

pH = 9.25 + log([NH₃]/[NH₄Cl])

pH = 9.25 + log(0.100/0.100)

pH = 9.25

When 9.00 mL of 0.100 M HCl is added to the buffer solution, the concentration of HCl is 0.0090 M. The HCl will react with the ammonia in the buffer solution to form ammonium chloride. The reaction is:

HCl + NH₃ ⇔ NH₄Cl

The concentration of ammonia will decrease and the concentration of ammonium chloride will increase. The new concentration of ammonia will be 0.091 M and the new concentration of ammonium chloride will be 0.109 M.

Substituting these values into the Henderson-Hasselbalch equation:

pH = 9.25 + log(0.091/0.109)

pH = 9.07

The change in pH is:

ΔpH = 9.25 - 9.07 = 0.18

Calculating the change in pH when 9.00 mL of 0.100 M NaOH is added to the original buffer solution:

The NaOH will react with the ammonium chloride in the buffer solution to form ammonia and water. The reaction is:

NaOH + NH₄Cl ⇔ NH₃ + H₂O + NaCl

The concentration of ammonia will increase and the concentration of ammonium chloride will decrease. The new concentration of ammonia will be 0.109 M and the new concentration of ammonium chloride will be 0.091 M.

Substituting these values into the Henderson-Hasselbalch equation:

pH = 9.25 + log(0.109/0.091)

pH = 9.43

The change in pH is:

ΔpH = 9.43 - 9.25 = 0.18

In both cases, the change in pH is 0.18. This is because the amount of HCl or NaOH added is equal to the buffer capacity of the buffer solution. The buffer capacity is the amount of acid or base that can be added to a buffer solution before the pH changes by 1 unit.

Find out more on pH here: https://brainly.com/question/26424076

#SPJ4

Among the given metals, copper (Cu) is the one that will dissolve in nitric acid but not in hydrochloric acid.

Option (c) is correct

Nitric acid  is a strong oxidizing acid that can dissolve a variety of metals, including copper. When copper reacts with nitric acid, it undergoes oxidation, and copper(II) ions ( are formed.

However, hydrochloric acid (HCl) is not a strong oxidizing agent, and it primarily acts as a proton donor (acid) in aqueous solutions. Copper does not readily react with hydrochloric acid to form soluble copper compounds. Instead, it may undergo a slow reaction with chloride ions present in hydrochloric acid to form insoluble copper chloride compounds.

To summarize, among the given metals, copper (Cu) will dissolve in nitric acid but not in hydrochloric acid (HCl).

Therefore, the correct answer will be option (c)

To know more about metals

https://brainly.com/question/29404080

#SPJ4

The answer is d) combination of all. Crystals can have different shapes and structures depending on the arrangement of atoms in the crystal lattice. Some crystals may have a cubic structure, while others may have a rhombus or octahedral structure. Therefore, "crystal of atom" can have a combination of all these structures.

[tex]\huge{\mathfrak{\colorbox{black}{\textcolor{lime}{I\:hope\:this\:helps\:!\:\:}}}}[/tex]

♥️ [tex]\large{\textcolor{red}{\underline{\mathcal{SUMIT\:\:ROY\:\:(:\:\:}}}}[/tex]

Change in entropy of the system ΔSsys would be positive, negative, negative, negative respectively.

The term "ΔSsys" refers to the change in entropy of the system. The entropy change of a system is determined by considering the system's state before and after the reaction occurred. Here are the sign of ΔSsys for each of the given chemical reactions:

a) 2H3O+ (aq) + CO32- (aq) → CO2 (g) + 3H2O (l)

The reaction involves the formation of one gas molecule and three liquid molecules from two aqueous solutions. Because gas molecules have a higher entropy than liquids, the entropy of the system would rise if the reaction were to take place. Therefore, ΔSsys would be positive.

b) CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l)

The reaction involves the formation of one gas molecule and two liquid molecules from two gas molecules. The entropy of the system would therefore decrease. Therefore, ΔSsys would be negative.

c) PCl3 (l) + Cl2 (g) → PCl5 (s)The reaction involves the formation of a solid product from a liquid and a gas. Because solids have lower entropy than liquids or gases, the entropy of the system would decrease. Therefore, ΔSsys would be negative.

d) SO3 (g) + H2O (l) → H2SO4 (l)The reaction involves the formation of a liquid from two gases. The entropy of the system would therefore decrease. Therefore, ΔSsys would be negative.

Learn more about Change in entropy here:

https://brainly.com/question/28244712

#SPJ11

The mass of carbon dioxide produced by the combustion of octane can be calculated using the balanced chemical equation for the reaction and the molar mass of octane and carbon dioxide.

The balanced chemical equation for the combustion of octane (C8H18) is:

2 C8H18 + 25 O2 → 16 CO2 + 18 H2O

From the balanced equation, we can see that for every 2 moles of octane burned, 16 moles of carbon dioxide are produced. To calculate the mass of carbon dioxide, we need to convert the moles of octane to moles of carbon dioxide using the molar ratio.

The molar mass of octane is approximately 114.22 g/mol, and the molar mass of carbon dioxide is approximately 44.01 g/mol. Therefore, the molar ratio of octane to carbon dioxide is 2:16 or 1:8.

To calculate the mass of carbon dioxide produced, we can use the formula:

Mass of carbon dioxide = (moles of octane) × (molar ratio) × (molar mass of carbon dioxide)

The exact mass calculation would require the quantity of octane, but once the moles of octane are known, the mass of carbon dioxide can be determined using the formula above.

Learn more about molar mass, below:

https://brainly.com/question/31545539

#SPJ11

According to the ionic bonding model, the compound with the highest melting point is likely to be the one with the strongest ionic bonds.

In the ionic bonding model, compounds form when there is a transfer of electrons from one element to another, resulting in the formation of positive and negative ions. The strength of the ionic bond is influenced by factors such as the charges and sizes of the ions involved.

Among the given compounds, MgO (magnesium oxide) is expected to have the highest melting point. This is because magnesium (Mg) is a metal that tends to lose two electrons and form a 2+ cation, while oxygen (O) is a nonmetal that tends to gain two electrons and form a 2- anion. The resulting Mg2+ and O2- ions have strong electrostatic attraction due to the opposite charges. This strong ionic bond requires a significant amount of energy to break, leading to a high melting point for MgO.

On the other hand, compounds like AlN (aluminum nitride), NaCl (sodium chloride), CaS (calcium sulfide), and RbI (rubidium iodide) also exhibit ionic bonding but with different ion sizes and charges. While these compounds have varying degrees of ionic bonding strength, they are expected to have lower melting points compared to MgO.

In conclusion, based on the ionic bonding model, MgO (option B) is likely to have the highest melting point among the given compounds due to its strong ionic bond resulting from the combination of a 2+ metal cation and a 2- nonmetal anion.

To learn more about compound -brainly.com/question/14186298

#SPJ11

Based on the reduction potential data, the standard cell potential for the electrochemical cell reaction is +1.10 V. The correct answer is B.

The standard cell potential is the difference between the standard reduction potentials of the two half-reactions. In this case, the half-reactions are:

Zn(s) + 2e- -> Zn²⁺(aq) E° red = -0.763 V

Cu²⁺(aq) + 2e- -> Cu(s) E° red = +0.340 V

The standard cell potential is therefore:

E° cell = E° red (cathode) - E° red (anode)

E° cell = +0.340 V - (-0.763 V)

E° cell = +1.10 V

Therefore, the correct option is B, +1.10 V.

To know more about standard cell potential, refer here:

https://brainly.com/question/29797132#

#SPJ11

1. Criteria used to distinguish viable organisms from nonviable suspended debris are motility, shape and structure.

2. The variability in color observed during Gram staining of B. cereus slides, ranging from intense blue to shades of pink, can be attributed to the extended incubation period.

3. We can use Visual Examination and Smell Test to ascertain whether your suspicion is justified.

1. To distinguish viable organisms from nonviable suspended debris in a drop of stagnant pond water during microscopic observation, the following criteria can be used:

2. The variability in color observed during Gram staining of B. cereus slides, ranging from intense blue to shades of pink, can be attributed to the extended incubation period. Gram staining is a differential staining technique used to categorize bacteria into two major groups: Gram-positive and Gram-negative, based on their cell wall composition.

3. To ascertain whether a nutrient agar slant culture is contaminated, the following steps can be followed:

By following these steps, you can gather evidence to determine whether a nutrient agar slant culture is contaminated or not.

The correct question is:

1. During the microscopic observation of a drop of stagnant pond water, what criteria would you use to distinguish viable organisms from nonviable suspended debris?

2. Because of a snowstorm, your regular laboratory session was canceled and the Gram staining procedure was performed on cultures incubated for a longer period of time. Examination of the stained B. cereus slides revealed a great deal of color variability, ranging from an intense blue to shades of pink Account for this result.

3. Upon observation of the nutrient agar slant culture, you strongly suspect that the culture is contaminated. Outline the method you would follow to ascertain whether your suspicion is justified.

To know more about Gram staining follow the link:

https://brainly.com/question/4129405

#SPJ4

The elements that can form acidic compounds are sulfur, arsenic, selenium, and antimony.

Sulfur (S), arsenic (As), selenium (Se), and antimony (Sb) are the elements that can form acidic compounds. These elements have the ability to gain electrons or donate hydrogen ions, resulting in the formation of acidic species.

Sulfur is commonly found in various acidic compounds, such as sulfuric acid (H_{2}SO_{4}), sulfurous acid ([tex]H_{2}SO_{3}[/tex]), and sulfides (e.g., hydrogen sulfide, H2S). Arsenic can form acids like arsenic acid ([tex]H_{3}AsO_{4}[/tex]) and arsenous acid (H_{3}AsO_{}). Selenium can form selenous acid ([tex]H_{2}SeO_{3}[/tex]) and selenic acid (H_{2}SeO_{4}). Antimony can react with oxygen to form antimony pentoxide ([tex]Sb_{2}O_{5}[/tex]), which can further react with water to produce antimony acid (HSb([tex]OH_{6}[/tex])).

On the other hand, rubidium (Rb), silicon (Si), and xenon (Xe) do not typically form acidic compounds. Rubidium is an alkali metal and is more likely to form basic compounds. Silicon is a nonmetal and is commonly found in covalent compounds rather than acidic ones. Xenon is a noble gas and is generally inert, meaning it does not readily form compounds, including acidic ones.

In summary, sulfur, arsenic, selenium, and antimony are the elements that can form acidic compounds, while rubidium, silicon, and xenon do not typically exhibit acidic properties.

Learn more about compounds here: https://brainly.com/question/13762398

#SPJ11

The mole ratio for 82% nitrogen (N) and 18% hydrogen (H) is roughly 1:3. As a result, the compound's empirical formula is NH₃ (one nitrogen and three hydrogen atoms).

To calculate the empirical formula from the given percent compositions, we need to convert the percentages into moles and find the simplest whole-number ratio between the elements. Here's the calculation:

Assuming we have 100 grams of the compound, we would have:

- 82 grams of nitrogen (N)

- 18 grams of hydrogen (H)

Now, we need to convert these masses into moles using the molar mass of each element:

- Nitrogen (N): 1 mole of N = 14.01 grams

[tex]\begin{equation}\text{Moles of N} = \frac{82 \text{ grams}}{14.01 \text{ g/mol}} \approx 5.85 \text{ mol}[/tex]

- Hydrogen (H): 1 mole of H = 1.01 grams

[tex]\[\text{Moles of H} = \frac{18 \text{ g}}{1.01 \text{ g/mol}} \approx 17.82 \text{ mol}\][/tex]

Next, we need to find the simplest whole-number ratio between nitrogen and hydrogen by dividing each number of moles by the smaller value (5.85 mol, in this case):

[tex]\[\text{Moles of N (rounded)} = \frac{5.85 \text{ mol}}{5.85 \text{ mol}} = 1\][/tex]

[tex]\[\text{Moles of H (rounded)} = \frac{17.82 \text{ mol}}{5.85 \text{ mol}} \approx 3.04\][/tex]

The ratio between N and H is approximately 1:3, so the empirical formula of the compound is NH₃ (1 nitrogen atom, 3 hydrogen atoms).

To know more about the mole ratio refer here :

https://brainly.com/question/32125056#

#SPJ11

The student can measure 10.5g solid and 25°C using the given equipment (thermometer, stopwatch, and beaker). Option B.

Based on the given equipment (thermometer, stopwatch, and beaker), let's examine the options to determine what the student can measure:

A. 10.5g solid and 24.8 cm³ liquid: The student cannot directly measure the mass of a solid using a thermometer, stopwatch, and beaker. Measuring the volume of a liquid would require a graduated cylinder or a measuring pipette, which is not mentioned in the given equipment. Therefore, this option is not feasible.

B. 10.5g solid and 25°C: The student can measure the temperature of an object using the thermometer, and it is possible to measure the mass of a solid by weighing it. Therefore, this option is valid. The student can weigh the solid using the balance and measure the temperature of an object using the thermometer.

C. 24.8 cm³ liquid and 45 seconds: The student can measure the volume of a liquid using the beaker. However, the stopwatch is not suitable for measuring volume or time intervals in seconds. It is specifically used for measuring time. Therefore, this option is not valid.

D. 25°C and 45 seconds: The student can measure the temperature using the thermometer. Additionally, the stopwatch can accurately measure a time interval of 45 seconds. Therefore, this option is valid. Option B is correct.

For more such question on thermometer. visit :

https://brainly.com/question/2339046

#SPJ8

The property that is used to calculate the pH of a solution is (A) the hydrogen ion concentration in mol/L.

pH is a measure of the acidity or basicity of a solution. The pH scale ranges from 0 to 14, with 7 being neutral, values below 7 being acidic, and values above 7 being basic.

To calculate the pH of a solution, you need to know the concentration of hydrogen ions (H+) in mol/L (A).

pH is defined as the negative logarithm (base 10) of the hydrogen ion concentration, so the equation for calculating pH is:

pH = -log[H+]

For example, if the hydrogen ion concentration is 1 x 10^-4 mol/L,

the pH would be:

pH = -log(1 x 10^-4)

pH = 4

Note that pH is typically reported, so in this case, the pH would be reported as 4.0.
To know more about hydrogen ion visit:

https://brainly.com/question/8069088

#SPJ11