Question 3
In the titration described in the previous problem, EDTA binds calcium ions with 1:1 stoichiometry.
If you begin the titration with a beaker containing 247mL of CaCl2 solution, and observe a color change after adding a total of 36.8 mL of 1.69M EDTA solution, what was the molar concentration of the initial CaCl2 solution?
Please enter your answer as a decimal (not scientific notation), using three significant figures.

a) Fe is the anode and Cu is the cathode. b) Ag is the cathode and Sn is anode c) Zn is anode and Cu is cathode d) Al is cathode and Sn anode.

Possible salts that can be dissolved in half cell to complete the cell : potassium chloride (KCl) and potassium nitrate (KNO3) are better inert salts.

A salt bridge's main function is to maintain electrical neutrality between two beakers and to do so the salt used must be inert. The ions must to move to and forth between the two half cells.

3. Cell notation for a voltaic cell consisting of metallic iron anode immersed in a solution of FeCl3 and a metallic copper cathode immersed in aqueous Cu(NO3)2.

Fe°|Fe3+|| Cu2+|Cu

Left electrode -- anode and right electrode -- cathode.

To know more about salt bridge, refer

https://brainly.com/question/13937976

#SPJ4

In order of decreasing boiling point, CH3OH > H2S > C2H6 > Ar. The strongest types of bonding are ionic, covalent, hydrogen, and van der waals forces, in that order.

London dispersion forces (LDF), dipole-dipole interactions, and hydrogen bonds are different intermolecular forces. All substances have LDF, but molecules can have combination of these three types of intermolecular interactions.

The dipole-dipole forces increase with increasing polarity. Dipole-dipole forces are in an unique (stronger) case in this situation. It is possible for it to exist between a molecule with an N, O, or F atom that has a hydrogen atom bonded to it directly and another molecule with an N, O, or F atom that has a lone pair of electrons.

Learn more about ionic bond here:

https://brainly.com/question/11527546

#SPJ4

The state of matter is dependent on the intermolecular forces of attraction and this is the case of Nitrogen which is gas and has Vander Waal's force of attraction while water, a liquid molecule has hydrogen bonding.

Molecular interaction occurs between molecules or atoms which are linked by bonds. These interactions include repulsive and cohesive forces. An interaction is cohesive when the attraction force between molecules are of alike nature. It is repulsive for unlike molecules.

Intermolecular forces are the attractive and repulsive forces between molecules. The presence of Vander Waal's force in Nitrogen and hydrogen bond in water makes it repulsive.

Learn more on molecular forces here: https://brainly.com/question/2193457

#SPJ1

According to ideal gas equation, there are 6.49 moles of oxygen gas in the container.

The ideal gas equation is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.The law was proposed by Emile Clapeyron.

Substituting the given values in above equation, n=PV/RT=101.3×145.6/8.314×273.15=6.49 moles.

Thus, there are 6.49 moles in the container.

Learn more about ideal gas equation,here:

https://brainly.com/question/28837405

#SPJ1

Burning coal produces a large amount of energy. This statement is false about coal. Therefore, option D is correct.

In the United States, coal is primarily used as a fuel to generate electricity. Bituminous coal, subbituminous coal, or lignite are burned in coal-fired power plants. The heat generated by coal combustion is used to convert water into high-pressure steam, which drives a turbine and generates electricity.

Carbon is found in all living things, including humans. When coal is burned, the carbon in the coal combines with the oxygen in the air to form carbon dioxide. Carbon dioxide (CO2) is a colorless and odorless gas, but it is one of several gases in the atmosphere that can trap the earth's heat.

Thus, option D is correct.

To learn more about burning coal, follow the link;

https://brainly.com/question/21085820

#SPJ1

The increasing order of the crystal field splitting- I− < Br− < S2− < SCN− < Cl−< N3 < F−< NCO−< OH−<C2O42−< O2−< H2O < acac− < NCS− < CH3CN <gly <py < NH3 < en  < bipy  < phen  < NO2−  < PPh3 < CN− < CO.

The ligands (affections to a metal ion) are listed in the spectrochemical series according to the strength of their field. The series was created by superimposing various sequences acquired from spectroscopic research because it is impossible to generate the full series by examining complexes with the single metal ion.

The ligands cyanide and CO are classified as strong-field ligands, whereas the halides are weak-field ligands. Ligands such as water and ammonia are said to create medium field effects.

To know more about spectrochemical series visit :

https://brainly.com/question/15520506

#SPJ4

Answer:

0.204 mol

Explanation:

Molar mass of Pb(NO3)2 = 331.22 g/mol

so mol of 67.6 g equals 67.6g x (1 mole/331.22g) = 0.204 mol

138.75 grams of fluorine contain in 285g CaF2

To calculate no of we use

No of moles = Given Mass/Molar mass

here given mass is 285g Molar Mass of CaF2 is 78.07g/mol

Number of moles = 285/78.07= 3.650 moles

so we can say that 1 mole of CaF2 contains 2 moles of F2 in it.

3.650 ,moles of Caf2 contains =2 x 3.650=7.30 moles  of F2

Mass of fluorine is 19

19 x 7.30  = 138.72 grams of fluorine is present in 285grams of Caf2

To learn more about Molar Mass :https://brainly.com/question/24191825

Answer:

the last one

Explanation:

THE IRON NAIL IS STILL UNDISSOLVED IN SOLUTION AFTER A WEEK

The formula of the ionic compound consisting of the positive ion to the left of the box and the negative ion above the box are as follows:

MgCl₂, MgS, MgF₂, Mg₃N₂, MgO, Mg₃P₂

CsCl, Cs₂S, CsF, Cs₃N, Cs₂O, Cs₃P

CrCl₃, Cr₂S₃, CrF₃, CrN, Cr₂O₃, CrP

NaCl, Na₂S, NaF, Na₃N, Na₂O, Na₃P

ZnCl₂, ZnS, ZnF₂, Zn₃N₂, ZnO, Zn₃P₂

AlCl₃, Al₂S₃, AlF₃, AlN, Al₂O₃, AlP

Ionic compounds are pure substances made up of chemically bound ions. Examples include his binary compounds such as table salt and polyatomic compounds such as sodium sulfate. All ionic compounds form crystal lattices. Ionic compounds are pure substances formed mainly by positive and negative ionic attraction. Compounds are formed mainly by ions, although a small amount of electron sharing always occurs.

To know more about ionic compounds, visit:

https://brainly.com/question/9167977

#SPJ1

Answer: 1.67 atm

Explanation:

Since the molar amounts are equal, this means that the partial pressure of acetylene is 1/3 of the total chamber pressure.

The equation for the equilibrium constant K = [ Cr₂O₇²⁻] [  H₂O ] / [ Cr₂O₇²⁻ ]²  [ H⁺]².

For a chemical reaction, the equilibrium constant can be defined as the ratio of reactant to product that is used to determine chemical behavior. At equilibrium, the forward reaction rate equals the backward reaction rate.

Equilibrium constants vary with temperature and are unaffected by reaction quantities, catalysts, or inert materials. Furthermore, it is unaffected by reactant concentrations, pressures, or volumes. In general, the temperature dependence of the equilibrium constant is determined by H of the reaction.

Thus, The equation for the equilibrium constant K = [ Cr₂O₇²⁻] [  H₂O ] / [ Cr₂O₇²⁻ ]²  [ H⁺]².

To learn more about an equilibrium constant, follow the link;

https://brainly.com/question/10038290

#SPJ1

Among the given amino acids, serine, aspartate and histidine can create protein salt bridges.

Two non-covalent interactions—hydrogen bonding and ionic bonding—combine to form a salt bridge. One of the most significant noncovalent forces in chemistry and in biological systems is ion pairing. In a normal acid-base neutralization process, amino acids interact with one another to create salt. Simple attraction between the positive and negative charges and the shift of the -H (positive ion) from the acid to the amine constitute the reaction.

Amino acids that take part in bridge formation are- The anionic carboxylate (RCOO) of either aspartate or glutamate and the cationic ammonium (RNH3+) from lysine or the guanidinium (RNHC(NH2)2+) of arginine most frequently form the salt bridge. Although these are the most frequent, depending on external variables, additional residues with ionizable side chains like histidine, tyrosine, and serine can also take part in salt bridge formation.

Know about amino acids at:

https://brainly.com/question/13151127

#SPJ1

Serine, aspartate, and histidine can build protein salt bridges among the other amino acids mentioned.

How do amino acids contribute to the creation of salt bridges?

A salt bridge is created when two non-covalent interactions—hydrogen bonding and ionic bonding—combine. Ion pairing is one of the most important noncovalent forces in chemistry and in biological systems. Amino acids interact with one another to produce salt during a typical acid-base neutralization process. The reaction is simply the shifting of the -H (positive ion) from the acid to the amine and the attraction of the positive and negative charges.

The anionic carboxylate (RCOO) of either aspartate or glutamate, the cationic ammonium (RNH3+) from lysine, or the guanidinium (RNHC(NH2)2+) from arginine, are the amino acids that participate in bridge building. Although these are the most frequent, salt bridge creation can also involve other residues with ionizable side chains such histidine, tyrosine, and serine depending on the environmental factors.

To learn more about amino acids:

brainly.com/question/13151127

#SPJ1

Answer:

The correct answer is

a. Compare the Re values of the mixture components to the Ry values of pure known compounds.

Chromatography can identify the components of an unknown mixture by comparing the retention time or retention index of the mixture components to that of known compounds.

Retention time is the time it takes for a compound to pass through a chromatographic column, and retention index is a measure of the distance a compound travels through the column compared to a set of reference compounds. Compounds in a mixture can be identified by comparing the retention time or retention index of the mixture components to pure known compounds.

Other techniques that can be used chromatographically to identify unknown mixture components include mass spectrometry, infrared spectroscopy, and nuclear magnetic resonance spectroscopy. These techniques involve analyzing the molecular properties of mixture components to determine their identities.

Read more about chromatography at:

brainly.com/question/25286710

#SPJ4

For a  radical addition reaction involving HBr and propene , includes initiation , propagation and termination. the reaction is given as :

CH₃CH=CH₂  +  HBr + peroxide ---->  CH₃CH₂CH₂Br

1) The steps involves in the initiation steps are :

RO - RO ---->  2RO°

RO° + H- Br ---->   ROH  +  Br°

2) this steps involves the propagation steps are :

CH₃ - CH = CH₂ +  Br°  --->  CH₃ - CH -CH₂ - Br

CH₃ - °CH - CH₂ - Br + H - Br ---->  CH₃ - CH₂ - CH₂ - Br + Br°

3) the termination step include :

Br° +  Br°  ---->   Br - Br

2 CH₃ - °CH - CH₂ - Br  --->  CH₃ - CH - CH₂ - Br

                                                          |

                                              CH₃ - CH - CH₂ - Br

CH₃ - °CH - CH₂ - Br + Br° --->  CH₃ - CH - CH₂ - Br

                                                             |

                                                            Br

Thus, the above steps are involved in the  radical addition reaction.

To learn more about radical reaction here

https://brainly.com/question/27940482

#SPJ4

K+ channels are important because carbonyl groups lining the wall of the pore and can interact with the unsolvated K+ ion, balancing the energy needed to remove the hydration shell.

Potassium channels play a role in repolarization of the membrane, which follows membrane depolarization by Na, and in some cases Ca, channels during the action potential; this is necessary for returning the membrane to a negative potential to terminate the action potential signal.

Opening of K+ channels in cell membranes with resulting increase in K+ conductance, shifts the membrane potential in a hyperpolarizing direction ,the K+ equilibrium potential. Hyperpolarization reduces the opening probability of ion channels involved in membrane depolarization and excitation is minimized.

Learn more about hyperpolarization on:

https://brainly.com/question/12982897

#SPJ4

The solvolysis of chrysanthemyl tosylate can occur through a nucleophilic substitution reaction, where the tosylate group is replaced by a solvent molecule. The mechanism can proceed through a series of steps as follows:

The tosylate group, which is a good leaving group, is protonated by the solvent, such as water, to form a charged intermediate.

The intermediate then undergoes an S_N2 reaction, where the solvent molecule acts as the nucleophile and attacks the carbon atom bearing the tosylate group. This results in the loss of the tosylate group and the formation of an intermediate containing a solvent molecule bonded to the carbon atom.

The intermediate then undergoes deprotonation, resulting in the formation of an alcohol functional group. The resulting alcohols will be a mixture of artemesia and yomogi alcohols, as these are the two primary components of chrysanthemyl tosylate.

Overall, the mechanism for the formation of these alcohols from chrysanthemyl tosylate can be represented as follows:

Chrysanthemyl tosylate + solvent (e.g. water) ---> chrysanthemic acid alcohol + tosylate ion

chrysanthemic acid alcohol ---> artemesia/yomogi alcohol + proton

Find more about Chrysanthemic acid

brainly.com/question/28203025

#SPJ4

The text to complete refers to electronegativity and electron affinity.

The electronegativity measures the energy released when an isolated atom loses an electron to form a potential ion. Electron affinity measures the ability of the atom to retain its own electrons and to attract electrons from other atoms in compounds.

Both expressions are part of the atonic energy, that is, the energy contained in the nucleus of the atom and considered one of the largest.

Learn more about electronegativity at https://brainly.com/question/17762711

#SPJ4

Answer: 56.1 g

Explanation:

We begin by finding the formula mass of KCl.

Therefore, 87.0 grams of KCl is equal to [tex]\frac{87.0}{74.5}=1.167785[/tex] moles.

From the reaction, we know that for every 2 moles of KCl produced, 3 moles of diatomic oxygen are produced. This means that there are [tex]1.167785(3/2)=1.7516775[/tex] moles of diatomic oxygen.

The formula mass of diatomic oxygen is 32 g/mol, meaning [tex](1.7516775)(32)=56.1[/tex] grams of diatomic oxygen were produced.

In contrast, the ratio and total quantity of stable atoms are defined by the half-life.Whatever the initial number of atoms, the percent of decrease is constant.They can determine the quantity of original carbon-14 by using the carbon-14 half-life of 5,730 years and the ratio of carbon-12 to carbon-14.

Since approximately half of the nuclei of each atom decay with each half-life, the number of radioactive atoms falls as the number of half-lives grows.

A longer dose interval will result from a longer half-life, which is reliant on both clearance and volume of distribution. For example, a CYP1A2 or CYP2C19 substrate can cause a decrease in clearance.

To know more about atoms visit:

https://brainly.com/question/13654549

#SPJ4

Answer: 333.415 grams of AlCl3 

Explanation:

Answer:

the answer is D.

After balancing the equation, the coefficient in front of the hydrogen would be 3.

A balanced chemical equation is an equation that contains an equal number of different atoms in the reactants and in the products in accordance with the law of conservation of atoms.

According to the law of conservation of atoms, atoms cannot be created nor destroyed during the course of chemical reactions, although their forms may change from reactants to products.

Going by this rule, the balanced equation of the reaction in the illustration would be: [tex]2Co(s) + 6HCl(aq) -- > 2CoCl_3(aq) + 3H_2(g)[/tex]

Thus, from the balanced equation, the coefficient of hydrogen is 3.

More on balancing chemical equations can be found here: https://brainly.com/question/28294176

#SPJ1

OPTION A and OPTION D are the possible products from the given structures provided.

Alkyl Halides: What Are They?

What does alkyl halide mean?

What varieties of alkyl are there?

To know more about alkyl checkout this link:

https://brainly.com/question/6419720

#SPJ4

Therefore, the correct claim is: A lunar eclipse can be photographed sometimes when Earth is in between the sun and the Moon.

A lunar eclipse occurs when Earth is positioned between the sun and the Moon, blocking the sun's light from reaching the Moon and casting a shadow on it.

However, not every lunar eclipse is visible and can be photographed. The visibility of a lunar eclipse depends on several factors such as the position of the moon in its orbit, the location of the observer on Earth, and the weather conditions.

Hence, the claim "A lunar eclipse can be photographed sometimes when Earth is in between the sun and the Moon" is supported by the evidence provided and is therefore correct.

Read more about lunar eclipse here:

https://brainly.com/question/8643

#SPJ1

Diagram A is a divergent plate boundary, B is a convergent plate boundary and C is a transform plate boundary.

Plate tectonics are boundaries between two or more plates moving towards each other, away from each other or past each other.  When these occur they are known as either convergent, divergent or transform plate boundaries.

A convergent plate boundary, the tectonic plate converge by subduction, where the thin ocean crust slides beneath thick crust. It is divergent when the linear features are moving away from each other. For transform plate, the broad zone slides northwestward past the north plate.

The full question is:

Label each diagram (A, B, and C) as either convergent plate boundary, divergent plate boundary, or transform plate boundary. three plate boundaries

Learn more on tectonic boundaries here: https://brainly.com/question/838446

#SPJ1

Given a titration reaction, titrant concentration and volume, the analyte volume and mass, then to identify titrant to analyte stoichiometry : Put the coefficients of each compound in order and simplify if possible.

During titration, there are two solutions:  analyte and the titrant. Analyte is the unknown solution for which you would like to know the concentration or the equilibrium constant. The titrant is the known solution which has a precise and accurate concentration.

The stoichiometric point is the point where an equal amount of acid and base is present to neutralize chemical reaction. Known reagents added to  chemical reaction are called titrant and unknown solution is called analyte.

To know more about titration, refer

https://brainly.com/question/186765

#SPJ4