Answer:
B. A measure of mass per unit volume
Explanation:
trust me
Answer:ITS C I PASSED THE TEST
Explanation:I DID THE PLATO
What is the phase of a 20 gram of crystalline when its temperature is 250 degrees clesius
Explanation:
20÷250 =12.5 and do it by using fourmulaes
Which three factors are used to calculate gravitational potential energy?
A. The height of an object
Jury
B. The mass of an object
C. The chemical formula for an object
D. The velocity of an object
E. The acceleration of an object due to gravity
F. The density of an object
Answer:
Height, mass, acceleration.
Explanation:
I hope it helps u dear! ^_^
what is the most similar to the Sun in luminosity and temperature
Explanation:
At a distance of 4.25 light years, Proxima is the closest-known star to our solar system. Science of the Alpha Centauri system. The two stars that make up Alpha Centauri, Rigil Kentaurus and Toliman, are quite similar to our sun
A good long distance runner has an average speed of 5.5m/a. How far would the runner go in 30 mins
Explanation:
if the runner maintains an average speed of 5.5 m/s
we can use the formula
vt = d
hence the answer would be:
5.5 × (30 × 60)
note: we have to convert meter to second which is the SI unit.
answer: 4950 meters
Gravity and magnetism are both
A common forces
B natural cycles
C states of matter
D forms of energy
Answer:
Explanation:
Comment
You have to read this carefully enough that you don't mix up energy and forces.
Gravity is a force. If you don't believe me try jumping off a building. Which way are you going to go and why? Down because gravity attracts your mass.
So Magnetism must be a force as well. It acts in one direction, but not a specific one the way gravity acts). It also either attracts or repulses (pushes an object away)
Answer A
Why can we see the moon at
night?
a. the moon is luminous and produces its own
light.
b. light from the earth is reflected back to us off
of the moon.
c. light from the sun is reflected back to us off
the moon
d. light from the sun is absorbed by the moon.
Answer:
c. light from the sun is reflected back to us off the moon
Explanation:
the moon does not produce its own light
A 5000kva 230/13. 8kv single phase power transformer has a resistance of 0. 38 ohms and reactance of 1. 9 ohms
The reactance of the circuit will be 5.233×10⁻⁴ ohm. Inductive reactance is the product of 2 times π frequency and the coil inductance.
What is reactance?
When alternating electricity passes through pure reactance, it causes a voltage drop that is 90 degrees out of phase with the current.
The letter “X” is used to represent reactance in mathematics, and it is measured in ohms.
The inductive reactance of a coil is calculated using the following formula:
Inductive reactance, or XL, is the product of 2 times p (pi), and the frequency of the ac current in hertz, and the coil inductance in henries.
XL= 2πfL
Where,
f {frequency)
L (Inductance)
The reactance of the circuit is found as;
[tex]\rm R_{new}=0.38[{(\frac{1}{60} )^2][/tex]
[tex]\rm R_{new}=1.055 \times 10^{-4} \ ohm[/tex]
The inductance of the circuit is;
[tex]\rm X_{new}=1.9(\frac{1}{60} )^2\\\\X_{new}= 5.233 \times 10^{-4}\ ohm[/tex]
Hence, the reactance of the circuit will be 5.233×10⁻⁴ ohm.
To learn more about the reactance, refer to the link;
https://brainly.com/question/17129912
#SPJ4
The fastest train in the world moves at 500 km/hr. How far will it go in 3 hours?
Answer:
1500 because i aded 500+500+500= 1500 km/hr thats how i got my answer
Explanation:
Answer:
1500 kmh
Explanation:
500+500+500 making it 1500
what kind of intermolecular force is H2O
Answer: H2O has hydrogen bonds, dipole-induced dipole forces, and London dispersion forces.
Explanation:
Answer:
The H2O water molecule is polar with intermolecular dipole-dipole hydrogen bonds. As the water molecules attract each other and form bonds, water displays properties such as high surface tension and a high heat of vaporization
As stream discharge increases ________. only velocity increases velocity, width, and depth increase velocity, width, and depth decrease only depth increases
As stream discharge increases, only velocity increases.
What is discharge?The discharge or volume flow rate is defined as the product of the velocity of the fluid and the area of cross- section of the pipe or tube.
Discharge Q = Area A x Velocity V
Q = AV
The discharge is directly proportional to the velocity of the fluid. When discharge increases, velocity is the only physical quantity that can be changed.
Thus, As stream discharge increases, only velocity increases.
Learn more about discharge.
https://brainly.com/question/25727077
#SPJ1
In dc electrode positive, how much power is at the work clamp?.
Answer:
1/3 power
Explanation:
I'm just a smart guy
Which of the following is a common use of infrared light?
O remote control
Otanning lamp
Omicrowave oven
Ostreet light
remote control
Explanation:
A remote control uses light waves just beyond the visible spectrum of light—infrared light waves—to change channels on your TV.
An electronic defibrillator used on heart attack victims works by delivering charge stored in a capacitor. If the device utilizes a
The energy stored in the capacitor at given capacitance and voltage is determined as 396.5 J.
Energy stored in the capacitorThe energy stored in the capacitor is calculated as follows;
E = ¹/₂CV²
where;
V is the voltage
E = ¹/₂ x 13 x 10⁻⁶ x (7.81 x 10³)²
C is the capacitanceV is the voltageE = ¹/₂ x 13 x 10⁻⁶ x (7.81 x 10³)²
E = 396.5 J
Thus, the energy stored in the capacitor at given capacitance and voltage is determined as 396.5 J.
The complete question is below
An electronic defibrillator used on heart attack victims works by delivering charge stored in a capacitor. If the device utilizes a 13.0 μF capacitor charged to 7.81 × 103 V, what is the energy stored in the capacitor?
Learn more about capacitor here: https://brainly.com/question/13578522
#SPJ4
How can biomass energy use improve water quality? a. the combustion of biomass material to produce energy improves water quality by filtering out pollutants. b. biomass energy use does not require water, which reduces the impact of other energy producing technologies on water quality. c. soil erosion and sedimentation are decreased during biomass crop growth. d. all of the above please select the best answer from the choices provided a b c d
The biomass energy can use improve water quality in soil erosion and sedimentation are decreased during biomass crop growth. The correct option is C.
What is biomass energy?Biomass energy is obtained by the processing of the dead plants and animal or vegetable, cow dung or wood.
The biomass energy obtained by these bio things, it is enriched with the nutrients required by the new crop plants to grow effectively.
The biomass energy provides good water quality by soil erosion and sedimentation.
Thus, The correct option is C.
Learn more about biomass energy.
https://brainly.com/question/2292559
#SPJ1
HELPPPPP PLEASEEEEEE
Which SI units are used to describe energy
Answer:
The SI units used to describe energy is Joule (J)
g) If two cars A and B are moving with velocity 60 km/hr and 80 km/hr respectively in the same direction. What will be the relative velocity of B with respect to A? (20 kmhr)
Explanation:
Here,
Velocity of A=60km/hr
Velocity of B=80km/hr
Now,
Relative velocity of B with respect to A in the same direction=Velocity of B - Velocity of A
=80km/hr-60km/hr
=20km/hr
Answer:
20Km / hr
Explanation:
Here
velocity car A=60km/hr
velocity car A=60km/hrvelocity car B=80km/hr
Now
Relative velocity of B with respect to A in the same direction =velocity of B - velocity of A
= 80Km/hr - 60Km/hr
=20km/hr Ans
Why is Radiology important in the medical field?
Answer:
Radiology plays a huge role in disease management by giving physicians more options, tools, and techniques for detection and treatment. Diagnostic imaging allows for detailed information about structural or disease-related changes. With the ability to diagnose during the early stages, patients may be saved.
Explanation:
A car of mass 1500 kg is moving with a velocity of 72 km/h. When the driver applied brakes, the velocity of the car reached 10 km/h by travelling the distance of 50 m. Calculate the amount of force applied in the car during that time.
Explanation:
friend I have solved it as we know that force = mass *acceleration and by the equations of motion
To solve this, we must be knowing each and every concept related to force and its calculation. Therefore, the amount of force applied in the car during the time is 6000N.
What is fundamental force?Nature is governed by four fundamental or universal forces. All stuff in the universe would disintegrate in the absence of these forces. Any pull or push that causes an item to change its physical condition is referred to as force (in terms of motion or deformity).
Mathematically,
V²-u²=2aS
V=72 km/h=72000/3600=20m/s
u=0m/s
s= 50 m
substituting all the given values in the above equation, we get
20²-0²=2×a×50
a=4m/s²
Force = mass ×acceleration
substituting all the given values in the above equation, we get
1500 kg=mass
Force = 1500 ×4
=6000N
Therefore, the amount of force applied in the car during the time is 6000N.
To know more about fundamental force, here:
https://brainly.com/question/14524583
#SPJ2
How can water cause the loss
of soil from bare farm fields on slopes?
How can this erosion be prevented?
Answer:
Soil erosion by water occurs when bare-sloped soil surface is exposed to rainfall, and the rainfall intensity exceeds the rate of soil intake, or infiltration rate, leading to soil-surface runoff.
Explanation:
Surface cover and runoff. Surface cover is a major factor to control erosion because it reduces the impact of raindrops falling on bare soils and wind removing soil particles. It also reduces the speed of water flowing over the land. Erosion risk is significantly reduced when there is more than 30% soil cover.
Answer:
by natural process of flood
by blasting of dam
increasing the water level
Write a hypothesis about the effects of magnetic and electric fields. Use the format of "if . . . then . . . because . . ." and be sure to answer the lesson question: "How can magnetic and electric fields be demonstrated?"
If the charged particle moves in the magnetic field or electric field, then it experiences magnetic force or electric force because of its magnetic or electric properties.
What is magnetic field?The magnetic field is the region of space where a charged object experiences magnetic force when it is moving.
When a charged particle such as an electron or proton moves inside a conductor, magnetic lines of force rotate around the particle. This relative motion causes the magnetic field to generate.
Thus, If the charged particle moves in the magnetic field or electric field, then it experiences magnetic force or electric force because of its magnetic or electric properties.
Learn more about magnetic field.
https://brainly.com/question/14848188
#SPJ1
Answer:
If a magnetic or electric field is present, materials that generate these fields will interact by attracting or repelling each other because of their magnetic or electric properties.
Explanation:
Discuss the 3 most important lessons you learned in this class. explain why they were so meaningful? how will critical thinking help you "realize potential-the ultimate objective"?
The three most important lessons learned in the school are never cheat, make less but selfless friends and respect teachers.
What is critical thinking?
Critical thinking is the action done by the person that has a wide range of thinking skills that eventually leads to a desired outcome.
The important lessons one learn being in schools that are crucial forr the whole life are never cheat, make less but selfless friends and respect teachers.
Critical thinking makes one realize his inner potential. The potential is the desired outcome and it is the final objective of the person.
Learn more about Critical thinking.
https://brainly.com/question/12980631
#SPJ1
The diagram shows a simple circuit. Which change would cause the light-bulb to get brighter?
A) Increase the length of the wire between the switch and the battery.
B) Decrease the length of the wire between the switch and the battery.
C) Reverse the direction of the battery.
D) Swap the positions of the lightbulb and the switch.
The correct option is B. Decrease the length of the wire between the switch and the battery.
Resistivity of wire
The resistivity of a wire is the measure of the opposition to the flow of current offered by the wire.
ρ = RA/L
RA = ρL
R = ρL/A
where;
ρ is resistivity of the wireR is resistance of the wireL is lengthA is areaDecrease in length of the wire will cause a decrease in the resistance of the wire, and it will increase the current flowing in the wire, causing the bulb to glow brighter.
Learn more about resistance of wire here: https://brainly.com/question/2908881
#SPJ1
Need help asap please!
what produces the emf in an electric generator?
a coil rotating in a magnetic field to change its flux
an electric current in a coil that produces a torque on the coil to make it rotate
an electric battery
the repulsion between a positive charge and the north pole of a magnet
Answer:
a coil rotating in a magnetic field to change its flux
The weight of a body is 147N. what is its mass?
To find the mass, with only the weight:
⇒ must consider the relationship between the mass and weight
⇒ (in other words) we must find the equation that has both the
mass and weight
Based on our physics knowledge, we know:
[tex]Weight=mass*gravitational_. acceleration[/tex]
Weight: 147NGravitational Acceleration: 9.8 m/s²Now let's plug in the values, and solve:
[tex]147N = mass*9.8_.m/s^2\\mass = 15_.kg[/tex]
Answer: 15 kg
Hope that helps!
*as a note, if you use the gravitational acceleration as 10m/s², then the answer would be 14.7 kg
What Is meant By MA of a machine is 2?
Answer:
See below ~
Explanation:
The Mechanical Advantage (MA) is defined as the ratio between the force produced by the machine to the force applied to it.
=============================================================
So,
⇒ [tex]\frac{F(out)}{F(in)} = 2[/tex]
⇒ This means that the force produced is twice the applied force
the conclusion of neutralization reaction
neutralization reactions occur when you combine two extremely reactive substances together for the purpose of rendering them inactive, or neutral.
Superguy is flying at treetop level near Paris when he sees the Eiffel Tower elevator start to fall (the cable snapped). His x-ray vision tells him Lois LaTour is inside. If Superguy is 1.00 km away from the tower, and the elevator falls from a height of 240 m, how long does Superguy have to save Lois, and what must be his average speed
If the elevator falls from a height of 240 meters and Superguy is 1 km away, he will have 6.5 seconds to save Lois, which means that his average speed must be 150 meters per second.
What is the average speed?The total distance traveled by an object divided by the total time taken is the average speed.
The average speed of an object indicates the pace at which it will traverse a distance. The metric unit of speed is the meter per second.
Given data:
Distance of super guy from the tower = 1.00 km
height(h)= 240 m
From the Newtons' second equation of motion:
[tex]\rm S= ut+\frac{1}{2} at^2 \\\\\ 210 = 0+\frac{10}{2} t^2 \\\\ t= \sqrt 42\\\\t=6.5 \ sec[/tex]
Distance is the foundation as the product the velocity and time;
D=ut
u=d/t
u=1000/t
u=1000/6.5
u=150 m/sec
Hence, he will have 6.5 seconds to save Lois, which means that his average speed must be 150 meters per second.
To learn more about the average speed, refer to the link;
https://brainly.com/question/12322912
#SPJ1
what is the direction of the magnetic force on the charge
Answer: A
Explanation:
Which set-up has the stronger magnetic field?
Answer:
set-up X
Explanation:
Assuming that both nails are iron and the charge of the battery is the same, set-up X has a stronger magnetic field.
The more coils [turns] made around a nail, the stronger the electromagnet / magnetic field will be because each coil/loop essentially sets up its own magnetic field.
Hope this helps!!