REACH- Registration, Evaluation, Authorization, and Restriction of Chemicals. Under REACH, chemical manufacturers, importers, and users are required to fulfill certain obligations to ensure the safe use of chemicals EU.
Chemical manufacturers or importers are required to register substances they produce or import in quantities of one tonne or more per year. This involves providing information on the properties, uses, and potential hazards of the chemicals. Additionally, they need to perform safety assessments and, if necessary, propose risk management measures to ensure the safe handling and use of the substances.
Users of chemicals, such as industrial companies, are also obligated to communicate information on the safe use of substances down the supply chain. They need to provide relevant safety data sheets and ensure proper risk management measures are implemented during their activities involving chemicals.
The REACH legislation aims to improve the protection of human health and the environment by ensuring the safe management and use of chemicals. It encourages the substitution of hazardous substances with safer alternatives and promotes the responsible handling and communication of chemical-related information throughout the supply chain.
To learn more about chemical manufacturers click here, brainly.com/question/32266107
#SPJ11
Biodiesel is an alkylester (RCOOR') obtained from fat and has combustion characteristics similar to diesel, but is stable, nontoxic, and microbial decomposition due to its relatively high flash point,
Biodiesel is indeed an alkylester (RCOOR') obtained from fat, and it possesses combustion characteristics similar to diesel fuel. However, biodiesel is known to be more stable, non-toxic, and less susceptible to microbial decomposition due to its relatively high flash point.
Biodiesel is produced through a chemical process called transesterification, where fats or vegetable oils are reacted with an alcohol (usually methanol or ethanol) in the presence of a catalyst, such as sodium hydroxide or potassium hydroxide.
This reaction results in the formation of alkyl esters, which are the main components of biodiesel.
The combustion characteristics of biodiesel are similar to those of conventional diesel fuel, which make it a suitable alternative for diesel engines without requiring significant engine modifications.
Biodiesel has a higher flash point compared to petroleum diesel, meaning it requires a higher temperature to ignite. This property enhances safety and reduces the risk of accidental fires.
Furthermore, biodiesel is considered stable because it has a lower propensity to degrade or oxidize over time compared to conventional diesel fuel. This stability ensures that biodiesel can be stored for longer periods without significant deterioration in quality.
Biodiesel is also recognized for its non-toxic nature. It is biodegradable and poses fewer health risks than petroleum-based diesel fuel. In case of a spill or leakage, biodiesel can be less harmful to the environment and human health.
In summary, biodiesel is an alkylester obtained from fat through the transesterification process. It exhibits combustion characteristics similar to diesel fuel but offers several advantages, including stability, non-toxicity, and a relatively high flash point.
These properties make biodiesel a viable and environmentally friendly alternative to petroleum diesel fuel, contributing to the diversification of energy sources and reducing the environmental impact associated with traditional fossil fuels.
CH₂-OCOR¹ CH-OCOR² + 3CH₂OH CH- CH₂-OCOR³ Triglyceride Methanol A + 3M Catalyst CH₂OH R¹COOCH3 CHOH + R³COOCH3 CH₂OH R³COOCH3 Glycerol Methyl esters G + 3P Triglyceride + R¹OH Diglyceride + R¹OH Monoglyceride + R¹OH Diglyceride + RCOOR¹ Monoglyceride + RCOOR¹ Glycerol + RCOOR¹ A+MB+P [1] B+MC+P [2] C+M G+P [3] temp (°C) 45 55 65 time (min) 5 0.94 0.89 0.80 10 0.89 0.81 0.67 15 0.84 0.74 0.57 20 0.80 0.67 0.50 25 0.76 0.63 0.45 30 0.73 0.58 0.40 tem(C) 45 55 65 60 rate constant (L/(mol min)) kl k2 Obtained from question 0.0255 Obtained from question 0.0510 Obtained from question 0.0965 Obtained from question ? k3 0.0881 0.141 0.218 ?
To learn more about alkylester, visit
https://brainly.com/question/28203011
#SPJ11
1. Distillation of sample mixture of pentane and hexane. Determine which organic compound will distil out first? 2. A student carried out a simple distillation on a compound known to boil at 124°C and reported an observed boiling point of 116-117°C. Gas chromatographic analysis of the product showed that the compound was pure, and a calibration 1 of the thermometer indicated that it was accurate. What procedural error might the student have made in setting up the distillation apparatus? 3. The directions in an experiment specify that the solvent, diethyl ether, be removed from the product by using a simple distillation. Why should the heat source for this distillation be a steam bath, not an electrical heating mantie?
In the distillation of a pentane and hexane mixture, pentane will distill out first due to its lower boiling point.
Pentane (C5H12) will distill out first in the distillation of a mixture of pentane and hexane. This is because pentane has a lower boiling point (36.1°C) compared to hexane (69°C). During distillation, as the temperature increases, the component with the lower boiling point vaporizes first and is collected as the distillate.
The procedural error that the student might have made in setting up the distillation apparatus is improper temperature measurement. The student's observed boiling point of 116-117°C is lower than the expected boiling point of 124°C. This discrepancy suggests that the temperature measurement during the distillation was inaccurate. The student may have placed the thermometer too high above the boiling flask or failed to properly immerse it in the vapor phase, leading to a lower temperature reading.
The heat source for the distillation of diethyl ether should be a steam bath rather than an electrical heating mantel. Diethyl ether is a highly volatile and flammable solvent with a low boiling point (34.6°C). Using an electrical heating mantel, which directly applies heat to the flask, can create a potential fire hazard due to the flammability of diethyl ether. A steam bath, on the other hand, indirectly heats the distillation flask using hot steam, reducing the risk of ignition and providing better control over the heating process.
In the distillation of a pentane and hexane mixture, pentane will distill out first due to its lower boiling point. The student's error in setting up the distillation apparatus might be inaccurate temperature measurement. When removing diethyl ether by distillation, a steam bath should be used as the heat source to minimize the risk of fire associated with the highly flammable nature of diethyl ether.
To know more about pentane , visit :
https://brainly.com/question/32575022
#SPJ11
Suppose a catalyst is added, providing a mechanism with three elementary steps. Draw the new energy diagram of an endothermic reaction, ensuring that the rate determining step is the second step. Indicate where the intermediates are found.
The catalyst lowers the activation energy of the second step and the intermediates are formed in the transition states between the first and second steps, and the second and third steps.
Here is a brief explanation of the diagram:
The horizontal axis represents the reaction coordinate, which is a measure of how far the reaction has progressed.The vertical axis represents the energy of the system.The reactants are at the bottom of the diagram, and the products are at the top.The activation energy is the energy barrier that must be overcome for the reaction to occur.The transition state is the point at which the system has the highest energy.The intermediates are unstable species that are formed in the transition states.The catalyst lowers the activation energy of the second step by providing an alternative pathway for the reaction to occur. This pathway has a lower activation energy than the uncatalyzed pathway, so the reaction is more likely to occur.
The rate determining step is the slowest step in the reaction mechanism. In this case, the rate determining step is the second step, which is catalyzed by the catalyst. This means that the overall rate of the reaction is determined by the rate of the second step.
The intermediates are formed in the transition states between the first and second steps, and the second and third steps. They are unstable species that quickly decompose to form the products.
Thus, the catalyst lowers the activation energy of the second step and the intermediates are formed in the transition states between the first and second steps, and the second and third steps.
To learn more about catalyst :
https://brainly.com/question/631853
#SPJ11
A reversible gas phase reaction, A+B=C is carried out in a tubular reactor (ID = 100 cm) packed with catalyst particles (spherical, D₂ = 0.005 m). Pure reactants at their stoichiometric amount are fed to the reactor at 100 atm and 400 °C and the reaction is carried out isothermally. The feed enters the reactor at vo-5 m³/h. The specific rate of reaction, k and the reaction equilibrium constant, K at reaction temperature are 0.0085 m² kmol-¹ kgcat¹ s¹ and 4.5 m³mol¹ respectively. a) Based on the following data plot the pressure ratio (y), rate of reaction and conversion as a function of weight of catalyst in the reactor. (µ- 3.21x10 kg/m.s; po-1.4 kg/m³; -0.4; P-1500 kg/m³) b) Estimate the maximum production rate of C (kmol/s) in the reactor. c) Analyse the effect of catalyst particle size on the conversion (D, from 0.0025 -0.0075 m). d) A chemical engineer suggests decreasing the diameter of the reactor by two times while other parameters remain the same (Dp-5 mm; bed and fluid properties are assumed same as in (a). Evaluate the proposal in terms of achieved conversion. e) A chemical engineer suggested to use a membrane reactor to increase the productivity of the reactor. Sketch the reactor and write the differential mole balance equations for A, B and C.
a) The rate of reaction can be calculated using the rate equation and the given specific rate of reaction (k) and equilibrium constant (K).
a) To plot the pressure ratio (y), rate of reaction, and conversion as a function of the weight of catalyst, we need to consider the ideal gas law, the rate equation, and the equilibrium constant:
Ideal Gas Law:
PV = nRT
Rate Equation:
Rate = k * (PA * PB - PC / K)
Equilibrium Constant:
K = (PC / (PA * PB))
Pressure ratio (y) can be calculated using the ideal gas law and the given data:
y = PC / PA
The rate of reaction can be calculated using the rate equation and the given specific rate of reaction (k) and equilibrium constant (K).
Conversion can be calculated using the equilibrium constant and the pressure ratio:
Conversion = (1 - (1 / K)) / (1 + (y / K))
b) The maximum production rate of C (kmol/s) in the reactor can be estimated by considering the limiting reactant. In this case, the limiting reactant is the reactant with the lowest stoichiometric coefficient. Let's assume it is A, and its stoichiometric coefficient is a.
Maximum production rate of C = Rate * a
c) The effect of catalyst particle size (D) on conversion can be analyzed by considering different particle sizes. The conversion can be calculated using the equilibrium constant and pressure ratio for each particle size.
d) To evaluate the proposal of decreasing the reactor diameter by two times while keeping other parameters the same, the conversion needs to be calculated using the new reactor diameter (Dp = 5 mm) and compared with the previous conversion.
e) In a membrane reactor, a membrane is used to separate the reactants from the products. The reactor can be sketched as a tube with the membrane placed inside. The differential mole balance equations for A, B, and C can be written as:
dNA/dt = R₁ - R₂
dNB/dt = R₁ - R₂
dNC/dt = R₂
Where R₁ represents the rate of reaction and R₂ represents the rate of diffusion through the membrane.
By performing the necessary calculations and analyses, the pressure ratio, rate of reaction, and conversion as a function of the weight of catalyst can be plotted.
To know more about Reaction, visit
brainly.com/question/25769000
#SPJ11
A vessel contains 0.8 kg Hydrogen at pressure 80 kPa, a temperature of 300K and a volume of 7.0 m³. If the specific heat capacity of Hydrogen at constant volume is 10.52 kJ/kg K. Calculate: 3.1. Heat capacity at constant pressure (assume that H₂ acts as an ideal gas). (6) 3.2. If the gas is heated from 18°C to 30°C, calculate the change in the internal energy and enthalpy
The change in internal energy is approximately 1.0 kJ and the change in enthalpy is approximately 1.7 kJ.
3.1 Heat capacity at constant pressureThe heat capacity at constant pressure is the amount of energy required to raise the temperature of a unit mass of a substance by 1 K, while keeping the pressure constant.
We can use the formula below to calculate the heat capacity at constant pressure for hydrogen:cp = cv + RWhere,cp = heat capacity at constant pressure,cv = heat capacity at constant volume,R = gas constantR for hydrogen = 8.31 J/mol K/2.016 g/mol = 4124.05 J/kg K (since we need the value for 1 kg hydrogen, we divided by 2.016 g/mol which is the molecular mass of hydrogen)
cp = 10.52 kJ/kg K + 4.124 kJ/kg Kcp = 14.644 kJ/kg K ≈ 14.6 kJ/kg K (rounded off to one decimal place)
Therefore, the heat capacity at constant pressure for hydrogen is 14.6 kJ/kg K.3.2 Change in internal energy and enthalpyWe can use the equations below to calculate the change in internal energy and enthalpy when hydrogen gas is heated from 18°C to 30°C:ΔU = mcvΔTΔH = mcpΔT
Where,ΔU = change in internal energy ΔH = change in enthalpym = mass of hydrogen gas = 0.8 kgcv = heat capacity at constant volume = 10.52 kJ/kg
Kcp = heat capacity at constant pressure = 14.6 kJ/kg KΔT = change in temperature = (30 - 18)°C = 12 KΔU = 0.8 kg × 10.52 kJ/kg K × 12 KΔU = 1004.16 J ≈ 1.0 kJ (rounded off to one decimal place)ΔH = 0.8 kg × 14.6 kJ/kg K × 12 KΔH = 1689.6 J ≈ 1.7 kJ (rounded off to one decimal place)
Therefore, the change in internal energy is approximately 1.0 kJ and the change in enthalpy is approximately 1.7 kJ.
Learn more about pressure here,
https://brainly.com/question/29213804
#SPJ11
A modified atmosphere requires higher-than-normal amounts of
oxygen but sparing amounts of water vapor. You have two streams
available for mixing:
stream A is dry air (79% N2, 21% O2)
stream B is enr
A modified atmosphere requires higher-than-normal amounts of oxygen but sparing amounts of water vapor. You have two streams available for mixing: • stream A is dry air (79% N2, 21% O2) • stream B
To produce 31.38 mol/h of the desired product with 0.6% water vapor, the flow rate of stream B (enriched air saturated with water vapor) needed would be 158.29 mol/h.
To determine the flow rate of stream B needed, we can set up a calculation based on the desired product composition.
First, we calculate the total moles of water vapor in the desired product:
31.38 mol/h * 0.6% = 0.18828 mol/h
Next, we determine the moles of water vapor in stream A:
7996 mol/h * 21% * 0.01 = 1679.16 mol/h
To achieve the desired product composition, the additional moles of water vapor needed will be the difference between the desired moles and the moles in stream A:
0.18828 mol/h - 1679.16 mol/h = -1678.97 mol/h
Since the result is negative, it means that stream A has more water vapor than required. Therefore, we need to compensate for the excess by subtracting it from stream B.
Finally, we calculate the flow rate of stream B needed:
1678.97 mol/h - 0.0389 * 57.47/100 * 158.29 mol/h = 158.29 mol/h
Therefore, a flow rate of 158.29 mol/h of stream B is required to produce 31.38 mol/h of the desired product with 0.6% water vapor.
To know more about water vapor click here:
https://brainly.com/question/30780506
#SPJ11
Taking into account cost, ease of operation, and ultimate disposal of residuals, 1. what type of technologies do you suggest for the following emissions? a) Gas containing 70% SO2 and 30% N₂ b) Gas
It is important to note that the selection of specific technologies should consider site-specific factors, regulatory requirements, and the characteristics of the gas emissions.
For the emissions described, I suggest the following technologies considering cost, ease of operation, and ultimate disposal of residuals:
a) Gas containing 70% SO2 and 30% N2:
To address the emission of gas containing 70% SO2 and 30% N2, the most suitable technology would be flue gas desulfurization (FGD). FGD technologies are designed to remove sulfur dioxide from flue gases before they are released into the atmosphere. The two commonly used FGD technologies are wet scrubbers and dry sorbent injection systems.
Wet Scrubbers: Wet scrubbers use a liquid (typically a slurry of limestone or lime) to react with the SO2 gas and convert it into a less harmful compound, such as calcium sulfate or calcium sulfite. Wet scrubbers are effective in removing SO2 and can achieve high removal efficiencies. They are relatively easy to operate and can handle high gas volumes. However, wet scrubbers require a significant amount of water for operation and produce a wet waste stream that needs proper treatment and disposal.
Dry Sorbent Injection Systems: Dry sorbent injection systems involve injecting a powdered sorbent, such as activated carbon or sodium bicarbonate, into the flue gas stream. The sorbent reacts with the SO2 gas, forming solid byproducts that can be collected in a particulate control device. Dry sorbent injection systems are more cost-effective and have a smaller footprint compared to wet scrubbers. They also generate a dry waste stream, which is easier to handle and dispose of.
b) Gas containing volatile organic compounds (VOCs):
To address emissions of gas containing volatile organic compounds (VOCs), a suitable technology would be catalytic oxidation. Catalytic oxidation systems use a catalyst to promote the oxidation of VOCs into carbon dioxide (CO2) and water vapor, which are environmentally benign.
Catalytic oxidation offers several advantages for VOC removal:
Cost-effectiveness: Catalytic oxidation systems are generally cost-effective in terms of operation and maintenance. Once the catalyst is installed, it can operate at lower temperatures, saving energy costs.
Ease of operation: Catalytic oxidation systems are relatively easy to operate and require minimal supervision. They can be automated and integrated into existing processes with ease.
Ultimate disposal of residuals: The byproducts of catalytic oxidation, primarily CO2 and water vapor, are environmentally friendly and do not pose disposal challenges. CO2 can be captured and potentially utilized in other industrial processes or for enhanced oil recovery.
For gas emissions containing 70% SO2 and 30% N2, flue gas desulfurization (FGD) technologies such as wet scrubbers or dry sorbent injection systems are recommended. These technologies effectively remove sulfur dioxide from flue gases and can achieve high removal efficiencies. The choice between wet scrubbers and dry sorbent injection systems depends on factors such as water availability, waste disposal capabilities, and cost considerations.
For gas emissions containing volatile organic compounds (VOCs), catalytic oxidation systems are suggested. These systems offer cost-effective and efficient removal of VOCs by promoting their oxidation into CO2 and water vapor. Catalytic oxidation is relatively easy to operate and ensures environmentally friendly disposal of residuals.
Consulting with environmental engineering experts and conducting a thorough analysis of the specific situation is recommended to determine the most suitable technology for emissions control.
To know more about emissions , visit;
https://brainly.com/question/13537021
#SPJ11
#5
NaBiO3 is a rare sodium salt that is slightly soluable in water. How can it be produced? Provide chemical reaction equations and explain briefly.
Sodium bismuthate (NaBiO3) can be produced by the reaction of bismuth(III) oxide (Bi2O3) with sodium hydroxide (NaOH) in water.
Here's the chemical equation for the reaction: Bi2O3 + 6NaOH + 3O2 → 2NaBiO3 + 3H2O. In this reaction, bismuth(III) oxide reacts with sodium hydroxide and oxygen gas to form sodium bismuthate and water. The oxygen gas is typically provided by bubbling air through the reaction mixture. The reaction takes place in an aqueous medium, where the bismuth(III) oxide dissolves in sodium hydroxide solution to form sodium bismuthate. The resulting sodium bismuthate is slightly soluble in water, which means that it remains in the solution rather than precipitating out as a solid.
This method provides a way to produce sodium bismuthate, which is a rare compound used in various applications such as inorganic synthesis and as an oxidizing agent in organic chemistry.
To learn more about sodium hydroxide click here: brainly.com/question/10073865
#SPJ11
1. Please briefly describe the role of salt bridge in galvanic cells.
2. Please briefly describe the principle of washing of precipitation.
The salt bridge plays a crucial role in galvanic cells by maintaining electrical neutrality and enabling the flow of ions. In a galvanic cell, oxidation occurs at the anode and reduction occurs at the cathode.
During these redox reactions, there is a transfer of electrons and the generation of an electrical potential difference. To prevent the buildup of excess positive or negative charges, a salt bridge is used to balance the charges between the two half-cells. The salt bridge typically contains an inert electrolyte, such as a gel or a solution of an electrolyte salt, which allows the movement of ions to complete the circuit. The ions in the salt bridge facilitate the transfer of charge, ensuring a continuous flow of electrons in the cell, and maintaining cell stability and efficiency.
The principle of washing of precipitation involves the removal of impurities or unwanted substances from a solid precipitate by washing it with a suitable liquid. When a precipitate is formed during a chemical reaction, it may contain soluble impurities or byproducts that need to be eliminated to obtain a purer product. Washing the precipitate serves to separate it from these impurities. The process typically involves adding a liquid solvent, such as water, to the precipitate and agitating the mixture to dislodge and dissolve the impurities. The mixture is then filtered, and the solid precipitate is collected while the dissolved impurities are washed away. This process of washing helps improve the purity and quality of the final product.
To learn more about galvanic cell click here: brainly.com/question/32505497
#SPJ11
the following table was given to candace by her teachers day would not find answer to some question help her in completing the table organic layer - O horizon
top soil - A horizon
sub-soil - B horizon
weathered Rock particle - C Horizon
Bedrock - R Horizon
Based on the given information, Candace can complete the table as follows:
Horizon Description
O Organic layer
A Topsoil
B Subsoil
C Weathered rock particles
R Bedrock
This table provides a brief description of each horizon in a soil profile.
- O Horizon (Organic layer): This layer consists of decomposed organic material such as leaves, plant debris, and humus. It is rich in nutrients and contributes to soil fertility.
- A Horizon (Topsoil): The topsoil is the uppermost layer that contains a mixture of organic matter, minerals, and nutrients. It is crucial for plant growth and supports the majority of plant roots.
- B Horizon (Subsoil): The subsoil is located beneath the topsoil and contains less organic matter. It consists of mineral deposits, clay, and dissolved materials leached down from the upper layers.
- C Horizon (Weathered rock particles): The C horizon is composed of weathered rock particles that have undergone some degree of decomposition. It contains broken-down rocks, minerals, and fragments.
- R Horizon (Bedrock): The bedrock is the solid, unweathered layer of rock that underlies all other horizons. It serves as the parent material from which soil is formed through the process of weathering and erosion.
By completing this table, Candace can have a clear understanding of the different horizons in a soil profile and their respective characteristics.
Chloroform is contained in the effluent of the sewage treatment plant that processes 4000 m3 per day. The initial concentration is 0.12 mg/L. This wastewater is removed using activated carbon in the form of powder to set the chloroform concentration in the outflow water to 0.05 mg/L. Find the amount of activated carbon you need per day. The adsorption equilibrium equation follows the Freundlich equation, where x/m = 2.6Ce^1/n and 1/n is 0.73
588 grams of activated carbon are required per day to remove Chloroform from the sewage.
Activated carbon is used to remove Chloroform from a sewage treatment plant that processes 4000 m3 per day. The Freundlich equation is used for adsorption equilibrium, where x/m = 2.6Ce to the power 1/n, and 1/n is 0.73. Chloroform is initially present in the effluent in a concentration of 0.12 mg/L and is desired to be reduced to 0.05 mg/L.
To determine the quantity of activated carbon required per day, the following steps should be taken:Step 1: Calculate the quantity of Chloroform removed using the Freundlich equation.x/m = 2.6Ce to the power (1/n) = 2.6(0.12) to the power 0.73= 0.147 mg/gStep 2: Determine the number of grams of activated carbon required per day to remove Chloroform from the sewage.0.147 mg/g * 4,000,000 g = 588,000 mg = 588 g
Therefore, 588 grams of activated carbon are required per day to remove Chloroform from the sewage.
Learn more about Chloroform here,
https://brainly.com/question/8419732
#SPJ11
What is the cell potential of an electrochemical cell that has the half-reactions
shown below?
Fe3++e Fe²+
Cu → Cu²+ + 2e
Click for a reduction potential chart
A. 0.43 V
OB. 1.2 V
O C. 1.1 V
OD. -0.43 V
The cell potential for the given electrochemical cell with Fe and Cu half-reactions is 1.1 V, calculated by subtracting their reduction potentials. The correct answer is option C.
Given half-reactions: [tex]Fe_3^+ + e^- \rightarrow Fe_2+Cu_2^+ + 2e^- \rightarrow Cu[/tex]. Since copper is nobler, the potential for the reaction of Fe to [tex]Fe_2^+[/tex] is obtained from the reduction potential chart. And, the potential for the reaction of Cu to [tex]Cu_2^+[/tex] is obtained by reversing the sign of the reduction potential. Hence, the cell reaction equation is: [tex]Fe_3^+ + Cu \rightarrow Fe_2^+ + Cu_2^+[/tex]The cell potential can be determined using the following equation: E°cell = E°(reduction potential of the cathode) - E°(reduction potential of the anode) = [tex]E\textdegree (Cu_2^+ + 2e^- \rightarrow Cu) - E\textdegree (Fe_3^+ + e^- \rightarrow Fe_2^+)= (0.34 V) - (-0.77 V) = 1.11 V.[/tex] The cell potential for the given electrochemical cell is 1.1V. Therefore, the correct answer is option C.SummaryThe cell potential for the given electrochemical cell with half-reactions [tex]Fe_3^+ + e^- \rightarrow Fe_2^+[/tex] and [tex]Cu_2^+ + 2e^- \rightarrow Cu[/tex] is calculated by subtracting the reduction potential of the anode reaction from the reduction potential of the cathode reaction, which is 1.1 V.For more questions on electrochemical cells
https://brainly.com/question/31031753
#SPJ8
What is the percent of each halogen in a 0.4712g mixture of sodium chloride and barium chloride which will yield a 0.9274g dried silver chloride. The MW for sodium chloride, barium chloride and silver chloride are 58.45g/mol, 208.25g/mol and 143.33 g/mol respectively.
The percent of each halogen in a 0.4712g mixture of sodium chloride and barium chloride which will yield a 0.9274g dried silver chloride is 356.92 % ( which is not possible).
Given information :
Weight of the mixture= 0.4712 g
Weight of silver chloride obtained= 0.9274 g
Molecular weight of sodium chloride= 58.45 g/mol
Molecular weight of barium chloride= 208.25 g/mol
Molecular weight of silver chloride= 143.33 g/mol
We are to determine the percentage of each halogen in the given mixture that will produce 0.9274g of dried silver chloride.
The chemical equation for the reaction between silver nitrate and sodium chloride is given by:NaCl + AgNO3 ⟶ AgCl + NaNO3
From the balanced equation, we can deduce that:
1 mole of NaCl produces 1 mole of AgCl. From the given mass of sodium chloride (NaCl), we can calculate the number of moles of NaCl that will react using the equation:
Number of moles = Mass/Molecular weight
Number of moles of NaCl = 0.4712 g / 58.45 g/mol = 0.008062 mol.
Since the reaction is 1:1 between NaCl and AgCl, the number of moles of AgCl produced will be 0.008062 mol. The mass of AgCl produced can be calculated as follows:
Mass = Number of moles × Molecular weight
Mass of AgCl produced = 0.008062 mol × 143.33 g/mol = 1.156 g
The difference in mass before and after the reaction represents the mass of Cl in the original mixture.
Mass of Cl = Mass of AgCl produced - Mass of original mixture
Mass of Cl = 1.156 g - 0.4712 g = 0.6848 g.
The percentage of Cl in the original mixture can be calculated as follows:
Percentage of Cl = (Mass of Cl in the original mixture / Mass of original mixture) × 100%
Percentage of Cl = (0.6848 g / 0.4712 g) × 100%
Percentage of Cl = 145.32% (This is not possible since the sum of all the percentages of the components in a mixture cannot be greater than 100%. Therefore, there was an error somewhere in the calculations. Please double-check the numbers given and redo the calculations if necessary.)
Similarly, the percentage of Ba can be calculated by using the mass of BaCl2 in the original mixture. The mass of BaCl2 can be determined as follows:
Mass of BaCl2 = (Mass of AgCl produced / Molecular weight of AgCl) × Molecular weight of BaCl2Mass of BaCl2 = (1.156 g / 143.33 g/mol) × 208.25 g/mol
Mass of BaCl2 = 1.682 g
The percentage of Ba in the original mixture can be calculated as follows:
Percentage of Ba = (Mass of BaCl2 in the original mixture / Mass of original mixture) × 100%
Percentage of Ba = (1.682 g / 0.4712 g) × 100%
Percentage of Ba = 356.92% (This is not possible since the sum of all the percentages of the components in a mixture cannot be greater than 100%. Therefore, there was an error somewhere in the calculations. Please double-check the numbers given and redo the calculations if necessary.)Therefore, the answer is not possible since the sum of all the percentages of the components in a mixture cannot be greater than 100%.
For more information on silver chloride : https://brainly.com/question/3229318
#SPJ11
Say a river has a discharge of 540 m^3 s^-1 and an average total suspended sediment concentration of 31 mg L^-1.
1) What is the sediment load expressed in tons / yr
(The Organic Carbon (assumed to be CH2O) by weight is that times .015)
2) How many moles of CO2 are consumed and O2 produced each year to support this flux?
(Given this information, I believe I have found the three answers but would like an expert to compare with)
The sediment load expressed in tons per year is approximately 0.5278 metric tons/year.
How to solve for the sediment loadSediment Load Calculation:
Discharge = 540 m^3/s
Suspended sediment concentration = 31 mg/L
Conversion of mg/L to g/m^3:
31 mg/L = 31 g/m^3
Sediment load per second:
Sediment load per second = Discharge * Suspended sediment concentration
= 540 m^3/s * 31 g/m^3
= 16,740 g/s
Conversion of grams to tons:
Sediment load per second = 16,740 g/s / 1,000,000
= 0.01674 metric tons/s
Sediment load per year:
Sediment load per year = 0.01674 metric tons/s * 60 s/min * 60 min/hour * 24 hours/day * 365 days/year
= 0.5278 metric tons/year
Therefore, the sediment load expressed in tons per year is approximately 0.5278 metric tons/year.
Read more on sediment load here:https://brainly.com/question/29870248
#SPJ4
Propose the synthesis of the below compounds from the given substrates and the necessary inorganic and/or organic reagents. a) benzonitrile (phenylcarbonitrile) from benzene (you can use other organic reagents) . b) butanone from ethyl acetylacetate (ethyl 3-oxobutanoate) and other necessary organic reagents . c) N-benzyl-pentylamine (without impurities of secondary and tertiary amines) from benzyl alcohol (phenyl- methanol) and pentan-1-ol . d) 1,3,5-tribromobenzene from nitrobenzene (5 pts). e) 3-ethyl-oct-3-ene from two carbonyl compounds (aldehydes and/or ketones) containing 5 carbon atoms in the molecule (at one of the steps use the Wittig reaction) ). f) 2-ethyl-hex-2-enal from but-1-ene
To synthesize benzonitrile from benzene, one possible route is the Sandmeyer reaction.
Benzene can be converted to benzonitrile using sodium cyanide (NaCN) and a copper(I) catalyst, such as copper(I) chloride (CuCl). The reaction proceeds as follows: Benzene + NaCN + CuCl → Benzonitril. b) To synthesize butanone from ethyl acetylacetate, one possible method is to perform a hydrolysis reaction. Ethyl acetylacetate can be hydrolyzed using an acid or base catalyst to yield butanone. The reaction can be represented as: Ethyl acetylacetate + H2O + Acid/Base catalyst → Butanone. c) To synthesize N-benzyl-pentylamine without impurities of secondary and tertiary amines, a reductive amination reaction can be employed. Benzyl alcohol can react with pentan-1-ol using an amine catalyst, such as Raney nickel, and hydrogen gas to yield N-benzyl-pentylamine. Benzyl alcohol + Pentan-1-ol + Amine catalyst + H2 → N-benzyl-pentylamine. d) To synthesize 1,3,5-tribromobenzene from nitrobenzene, a bromination reaction can be performed. Nitrobenzene can be treated with bromine (Br2) in the presence of a Lewis acid catalyst, such as iron(III) bromide (FeBr3), to yield 1,3,5-tribromobenzene. Nitrobenzene + Br2 + Lewis acid catalyst → 1,3,5-tribromobenzene.
e) To synthesize 3-ethyl-oct-3-ene, a possible route is to use the Wittig reaction. Two carbonyl compounds containing 5 carbon atoms in the molecule, such as an aldehyde and a ketone, can react with a phosphonium ylide, such as methyltriphenylphosphonium bromide, to yield the desired product. Aldehyde + Ketone + Phosphonium ylide → 3-ethyl-oct-3-ene. f) To synthesize 2-ethyl-hex-2-enal from but-1-ene, an oxidation reaction can be performed. But-1-ene can be oxidized using an oxidizing agent, such as potassium permanganate (KMnO4), in the presence of a catalyst, such as acidic conditions, to yield 2-ethyl-hex-2-enal. But-1-ene + Oxidizing agent + Catalyst → 2-ethyl-hex-2-enal. Please note that these are general approaches, and specific reaction conditions and reagents may vary. It is always important to consult reliable references and conduct further research for detailed procedures and precautions before carrying out any chemical synthesis.
To learn more about Sandmeyer reaction click here: brainly.com/question/32066841
#SPJ11
Which unit can be used to express the rate of a reaction?
Ο Α.
OB.
mL/g
O c. g/mL
O D. mL/mol
OE. s/mL
mL/s
option (A) mL/s is the unit used to express the rate of a reaction.
The unit that can be used to express the rate of a reaction is mL/s. The rate of a chemical reaction refers to the speed at which it occurs.
It is defined as the change in concentration of a reactant or product per unit time. The units used to express reaction rate are typically in terms of concentration per unit time.
Hence, mL/s is the correct answer. In general, the rate of a reaction can be expressed as the change in concentration over a specific time interval.
This can be given as: Rate = Change in concentration / Time interval. The units of the rate of a reaction can vary depending on the reaction being studied. For example, if the concentration is measured in mL and time is measured in seconds, then the unit of rate would be mL/s. Hence, mL/s is the unit used to express the rate of a reaction.
For more questions on rate of a reaction, click on:
https://brainly.com/question/24795637
#SPJ8
Please explain the levels of maintenance in regards to a
beer brewery.
•Level 1 - Organizational: At the operational site (low
maintenance skills)
•Level 2 - Intermediate: Mobile or Fixed units /
In a beer brewery, the levels of maintenance refer to the different stages or categories of maintenance activities that are performed to ensure the smooth operation and reliability of the brewing equipment and facilities. These levels can vary depending on the complexity of the maintenance tasks and the skills required to perform them. Here are the explanations for two levels of maintenance commonly seen in beer breweries:
1. Level 1 - Organizational Maintenance:
At this level, the maintenance activities primarily focus on the day-to-day operations and basic upkeep of the brewing equipment. These tasks are often carried out by the operational staff at the brewery site who have basic maintenance skills. The activities involved at this level may include routine inspections, cleaning, lubrication, and minor repairs or adjustments. The goal is to maintain the equipment in good working condition, prevent breakdowns, and ensure the production process runs smoothly.
2. Level 2 - Intermediate Maintenance:
The intermediate maintenance level involves more specialized tasks that may require the involvement of dedicated maintenance personnel or specialized technicians. This level includes maintenance activities performed on mobile or fixed units within the brewery, such as specific brewing vessels, fermentation tanks, or packaging equipment. These tasks often require a higher level of technical expertise and knowledge of the brewing process. Examples of activities at this level can include equipment calibration, troubleshooting and diagnostics, preventive maintenance, component replacement, and equipment optimization.
It's important to note that the levels of maintenance may vary depending on the size of the brewery, the complexity of the brewing process, and the level of automation in place. Larger breweries with more advanced equipment and automation systems may have additional levels of maintenance, such as advanced diagnostics and predictive maintenance, to ensure maximum efficiency and minimize downtime.
In summary, the levels of maintenance in a beer brewery range from basic organizational maintenance performed by operational staff to intermediate maintenance carried out by dedicated maintenance personnel or specialized technicians. These levels reflect the varying complexity and skill requirements of the maintenance tasks involved in ensuring the smooth operation of the brewery's equipment and facilities.
To know more about reliability visit:
https://brainly.com/question/2976377
#SPJ11
A gas mixture consisting of 15.0 mole% methane, 60.0% ethylene, and 25.0% ethane is compressed to a pressure of 175 bar at 90 C. It flows through a process line in which the velocity should be no greater than 10 m/s. What flow rate (kmol/min) of the mixture can be handled by a 2-cm internal diameter pipe?
The flow rate of the given gas mixture is 4.73 mol/min.
The volumetric flow rate of gas can be determined as ;
Q = (π/4) x D² x V ...[1]
where, Q is the volumetric flow rate
D is the internal diameter of the pipe
V is the velocity of gas
Substituting the values of D and V in equation [1] ;
Q = (π/4) x (0.02 m)² x (10 m/s)Q = 0.000314 m³/s
The number of moles of gas can be calculated using the Ideal Gas Equation ;
PV = nRT
n = PV/RT ...[2]
Where, n is the number of moles
P is the pressure of the gas
V is the volume of the gas
R is the Universal gas constant
T is the temperature of the gas
Substituting the values in equation [2],
n = (175 x 10⁵ Pa x 0.000314 m³/s) / (8.314 J/K.mol x 363 K)
n = 0.00473 kmol/min = 4.73 mol/min
Therefore, the flow rate of the given gas mixture is 4.73 mol/min.
To learn more about the Ideal Gas Equation :
https://brainly.com/question/27870704
#SPJ11
Question: Mercury Emissions From Coal Fired Power Plants Are Now A Major Concern. Do Some Research And Answer The Following Questions. Give Your References. You May Do Internet Searches To Answer This Question. You Should Use Sources From The EPA And Other Federal Agencies. What Are The Forms Of Mercury That Are Found In Emissions From Coal Fired Power Plants.
Mercury emissions from coal fired power plants are now a major concern. Do some research and answer the following questions. Give your references. You may do internet searches to answer this question. You should use sources from the EPA and other federal agencies.
What are the forms of mercury that are found in emissions from coal fired power plants.
Describe possible emissions controls that could capture mercury.
Mercury is a naturally occurring metal that can be released into the environment, including the air, through human activities like burning coal. Mercury emissions from coal-fired power plants have become a major concern because of their adverse effects on human health and the environment.
The forms of mercury that are found in emissions from coal-fired power plants are elemental mercury (Hg0) and oxidized mercury (Hg2+). Elemental mercury is the vapor form of the metal, while oxidized mercury is the result of chemical reactions that occur during combustion. Elemental mercury can remain in the atmosphere for a long time and can travel long distances, while oxidized mercury is more likely to deposit near the source of emissions.
There are several emissions controls that can capture mercury, including activated carbon injection, which involves injecting activated carbon into the flue gas to absorb mercury; dry sorbent injection, which uses powdered sorbents to adsorb mercury; and wet flue gas desulfurization, which involves using a wet scrubber to remove sulfur dioxide and other pollutants, including mercury.
Another possible control method is the use of electrostatic precipitators, which can remove particulate matter and some forms of mercury from flue gas.
To know more about Mercury visit:
https://brainly.com/question/33440356
#SPJ11
"Describe how an explosion could occur in the reactor vessel
during the cleaning operation.
An explosion can occur in a reactor vessel during the cleaning operation if certain conditions are present.
For example, if there is a buildup of flammable gases or vapors inside the vessel, such as from residual chemicals or solvents, and there is an ignition source like a spark or heat, it can lead to a rapid combustion reaction.
Additionally, if there is a lack of proper ventilation or inadequate control of pressure and temperature, it can result in an increase in pressure and temperature beyond safe limits, causing a sudden release of energy and an explosion. It is crucial to follow proper safety protocols, including thorough cleaning procedures and adherence to safety guidelines, to prevent such incidents.
To know more about combustion reaction related question visit:
https://brainly.com/question/14335621
#SPJ11
For the previous question, Cr(s) + 2Fe3+ -> Cr3+(aq) + 3Fe2+(aq) What species is the reducing agent? a. Fe2+ b. Cr3+ c. Fe3+ d. Cr(s) Clear my choice
The reducing agent in the reaction : Cr(s) + 2Fe3+ -> Cr3+(aq) + 3Fe2+(aq) is Cr(s).
A reducing agent is a substance that reduces other substances by donating electrons to them. This means that a reducing agent is itself oxidized because it loses electrons in the process.
Redox reactions involve both reduction (gain of electrons) and oxidation (loss of electrons).
In the reaction: Cr(s) + 2Fe3+ -> Cr3+(aq) + 3Fe2+(aq), Cr(s) loses electrons, and Fe3+ gains electrons.
Therefore, Cr(s) is a reducing agent while Fe3+ is an oxidizing agent.
Thus, the reducing agent in the reaction: Cr(s) + 2Fe3+ -> Cr3+(aq) + 3Fe2+(aq) is Cr(s).
To learn more about reducing agent :
https://brainly.com/question/7484765
#SPJ11
A grocer carefully lifts a 100 N crate of apples a distance of 1.5 m to a shelf in 2.5 seconds. What is his power output?
The grocer's power output is 60 Watts. Power is measured in Watts, which represents the rate of energy transfer or work done per unit time.
Power is defined as the rate at which work is done or energy is transferred. It can be calculated using the formula: Power = Work / Time.
In this case, the work done by the grocer is equal to the force applied multiplied by the distance moved. The force applied is 100 N and the distance moved is 1.5 m, so the work done is:
Work = Force * Distance
Work = 100 N * 1.5 m
Work = 150 Joules
The time taken to perform the work is 2.5 seconds. Now we can calculate the power output:
Power = Work / Time
Power = 150 Joules / 2.5 seconds
Power = 60 Watts
Therefore, the grocer's power output is 60 Watts. Power is measured in Watts, which represents the rate of energy transfer or work done per unit time. It indicates how quickly the grocer is able to lift the crate of apples to the shelf.
For more questions on force, click on:
https://brainly.com/question/12785175
#SPJ8
1.
a) What makes "good" ozone good and "bad" ozone bad? Where can each
of these be
found in the atmosphere?
b) In addition to sunlight, what are the two chemical "ingredients"
required fo
a) Ozone is good in the upper atmosphere, also known as the stratosphere because it acts as a natural shield against the harmful ultraviolet radiation of the sun. (b) The two main ingredients required for the formation of bad ozone in the troposphere are nitrogen oxides (NOx) and volatile organic compounds (VOCs).
(a) In the lower atmosphere, or the troposphere, ozone is bad because it is a highly reactive chemical that is hazardous to human health and the environment. Good ozone occurs naturally in the atmosphere and forms the ozone layer, whereas bad ozone is created by human activities such as fossil fuel combustion and is commonly referred to as smog.
Good ozone is found primarily in the upper atmosphere or the stratosphere, while bad ozone is found in the lower atmosphere or the troposphere. Ozone found in the stratosphere is formed naturally by the interaction between oxygen and ultraviolet radiation from the sun. However, in the troposphere, ozone is formed through the chemical reaction between nitrogen oxides and volatile organic compounds in the presence of sunlight. This is the type of ozone that contributes to smog and is harmful to human health.
b) Nitrogen oxides are mainly produced by combustion processes in vehicles, power plants, and industrial facilities. VOCs, on the other hand, are emitted by a variety of sources including gasoline and diesel-powered vehicles, chemical solvents, and industrial processes.
In the presence of sunlight, NOx and VOCs react to form ground-level ozone. This process is called photochemical smog, and it is a significant environmental problem in many urban areas around the world. In addition to sunlight, other meteorological factors such as temperature, wind, and precipitation can also influence the formation of ground-level ozone.
To know more about chemical visit:
https://brainly.com/question/29240183
#SPJ11
In a directly proportional relationship, the line graph plotted is a __________ line which passes through the origin. What one word completes the sentence?
In a direct proportional relationship, the line graph is a straight line which passes through the origin.
Direct proportion is a relationship in which we plot a straight line of the type
y = mx.This is the equation in which y is directly proportional to x and this line passes through origin.
there are many examples of direct proportion in which one quantity varies directly with other i.e. it either decreases or increases in proportion with other quantity.in such cases one variable is called dependent variable while the other is called independent variable.
For eg. if in a certain job the greater the number of workers will be more will be the amount of work done in a given time.
To know more about direct proportion check:
https://brainly.com/question/13800336
In a directly proportional relationship, the line graph plotted is a straight line which passes through the origin.
When two variables exhibit a directly proportional relationship, it means that as one variable increases, the other variable also increases by a consistent ratio or factor. In other words, the ratio of the two variables remains constant throughout. This constant ratio is often referred to as the proportionality constant.
When representing this relationship graphically, a straight line passing through the origin is observed. This indicates that for every increase or decrease in one variable, the other variable changes in direct proportion. This means that as one variable doubles, the other variable also doubles, and as one variable triples, the other variable also triples, and so on.
The line passing through the origin signifies that when both variables are zero, there is no quantity of either variable. As the values increase, they do so proportionally. Any point on the line represents a direct proportional relationship between the variables.
This type of graph is characterized by a linear relationship, where the slope of the line represents the constant rate of change or the proportionality constant. The steeper the slope, the greater the rate of change, indicating a stronger direct proportionality.
Overall, a straight line passing through the origin is a distinctive characteristic of a directly proportional relationship, representing the consistent ratio between the variables.
Know more about straight line here:
https://brainly.com/question/28526173
#SPJ8
3. Calculate the pH of a 0.10 M solution of the salt, NaA, the pk, for HA = 4.14
The pH of a 0.10 M solution of the salt NaA can be calculated using the pKa value of HA. If the pKa value for HA is 4.14, the pH of the solution can be determined to be less than 7, indicating an acidic solution.
The pH of the solution, we need to consider the dissociation of the salt NaA, which can be represented as Na+ + A-. The A- ion comes from the dissociation of the acid HA, where A- is the conjugate base and HA is the acid.
Since we are given the pKa value of HA as 4.14, we know that the acid is weak. A weak acid only partially dissociates in water, so we can assume that the concentration of A- in the solution is equal to the concentration of HA. Therefore, the concentration of A- is 0.10 M.
To calculate the pH, we need to determine the concentration of H+ ions. Since A- is the conjugate base of HA, it can accept H+ ions in solution. At equilibrium, the concentration of H+ ions is determined by the dissociation of water and the equilibrium constant, Kw.
As the pKa value is less than 7, indicating a weak acid, the concentration of H+ ions will be higher than the concentration of OH- ions in the solution. Therefore, the pH of the 0.10 M solution of NaA will be less than 7, indicating an acidic solution. The exact pH value can be calculated by taking the negative logarithm (base 10) of the H+ ion concentration.
Learn more about equilibrium : brainly.com/question/30694482
#SPJ11
PLEASE HELP ME REAL QUICK 35 POINTS WILL MAKRK BRAINLIEST IF CORRECT
How many formula units of NaCl are in 116 g NaCI? The molar mass of NaCl is about 58 g/mol. [?] * 10[?] fun NaCl Note : Avogadro's number is 6.02 * 1023 .
Answer:
Explanation:
To determine the number of formula units of NaCl in 116 g of NaCl, we need to use the concept of moles.
First, we calculate the number of moles of NaCl in 116 g:
Number of moles = Mass / Molar mass
Number of moles = 116 g / 58 g/mol = 2 moles
Next, we use Avogadro's number to convert the number of moles to the number of formula units:
Number of formula units = Number of moles * Avogadro's number
Number of formula units = 2 moles * (6.02 * 10^23 formula units/mol)
Number of formula units = 1.204 * 10^24 formula units
Therefore, there are approximately 1.204 * 10^24 formula units of NaCl in 116 g of NaCl.
a. State the difference between reversible and irreversible reaction b. Y CS Tha PFR 6.00 1280 Pure A is fed at a volumetric flow rate of 10 ft³/h and a concentration of 5x10³ lbmol/ft to a CSTR that is connected in series to a PFR. If the volumes of the CSTR and PFR were 1200 ft' and 600 ft respectively as shown below, calculate the intermediate and final conversions (XAI and XA2) that can be achieved with existing system. Reaction kinetics is shown in the graph below. Don't can be achieved CSTR V=Y² CSxu' PfR. df-V dv CSTR=ff -Yj PFR=F₁-X dv
a. The main difference between reversible and irreversible reactions lies in the ability to reverse the reaction and restore the initial reactants.
b. To calculate the intermediate and final conversions (XAI and XA2) achievable with the existing system, we would need additional information such as the reaction kinetics or rate expression.
a. Difference between reversible and irreversible reaction:
The main difference between reversible and irreversible reactions lies in the ability to reverse the reaction and restore the initial reactants.
Reversible reaction: In a reversible reaction, the reaction can proceed in both the forward and reverse directions. This means that the products can react to form the original reactants under suitable conditions. Reversible reactions occur when the system is not at equilibrium and can shift towards the reactants or products depending on the prevailing conditions (e.g., temperature, pressure, concentration). The reaction can reach a dynamic equilibrium state where the rates of the forward and reverse reactions are equal, and the concentrations of reactants and products remain constant over time.
Irreversible reaction: In contrast, an irreversible reaction proceeds only in the forward direction, and it is not possible to regenerate the original reactants once the reaction has occurred. The reactants are converted into products, and this conversion is typically favored under specific conditions, such as high temperatures or the presence of a catalyst. Irreversible reactions are often used to achieve desired chemical transformations and are commonly encountered in many industrial processes.
b. In the given system, a CSTR (continuous stirred-tank reactor) is connected in series with a PFR (plug-flow reactor). The volumes of the CSTR and PFR are provided as 1200 ft³ and 600 ft³, respectively. The feed to the system is pure A with a volumetric flow rate of 10 ft³/h and a concentration of 5x10³ lbmol/ft.
To calculate the intermediate and final conversions (XAI and XA2) achievable with the existing system, we would need additional information such as the reaction kinetics or rate expression. Unfortunately, the provided equation and symbols in the question do not give a clear representation of the reaction kinetics or rate expression. Without the necessary information, it is not possible to calculate the conversions accurately.
To determine the conversions, we would typically need the rate equation or kinetic expression for the reaction and the residence time or reaction time in each reactor (CSTR and PFR). With these details, we could solve the appropriate mass balance equations to calculate the intermediate and final conversions.
To know more about reversible and irreversible reaction, visit
https://brainly.in/question/14740496
#SPJ11
A Click Submit to complete this assessment. Q Question 8 Consider the following redox reaction which was conducted under acidic medium to answer this question. M2+ + XO3 MO4 4 x3+ A 0.166 M MC1₂ (MM = 124.8) aqueous solution was placed in a buret and titrated against a 3.35 g sample of 81.1% pure NaXO3 (MM = 279.7) that had been dissolved in an appropriate amount of acid until the redox indicator changed color. Given this information, how many mL of titrant were necessary to completely react with the titrand? Use 3 significant figures to report your answer. A Click Submit to complete this assessment. Type here to search 5: 7 89°F
Therefore, approximately 0.234 mL of titrant is necessary to completely react with the titrand in the given redox reaction.
In order to calculate the volume of titrant needed, we first need to determine the number of moles of NaXO3. The mass of the NaXO3 sample is given as 3.35 g, and its purity is stated as 81.1%. Using the molar mass of NaXO3 (279.7 g/mol), we can calculate the number of moles:
Number of moles of NaXO3 = (mass of NaXO3 sample * purity) / molar mass
= (3.35 g * 0.811) / 279.7 g/mol
≈ 0.00971 mol
From the balanced redox equation, we can see that the stoichiometric ratio between NaXO3 and M2+ is 1:4. Therefore, the number of moles of ratioM2+ is four times the number of moles of NaXO3:
Number of moles of M2+ = 4 * (number of moles of NaXO3)
≈ 4 * 0.00971 mol
≈ 0.0388 mol
Next, we can use the provided concentration of MC1₂ (0.166 M) to calculate the volume of titrant (in mL) required to completely react with the M2+:
Volume of titrant (mL) = (number of moles of M2+) / (concentration of MC1₂)
= (0.0388 mol) / (0.166 mol/L)
≈ 0.234 mL
Therefore, approximately 0.234 mL of titrant is necessary to completely react with the titrand in the given redox reaction.
To learn more about stoichiometric click here, brainly.com/question/6907332
#SPJ11
How does the temperature change when a layer of glass is added?
Answer:
thermal shock
Explanation:
the temperatures inside the glass jar should have continued to increase over time. Internal stresses due to uneven heating. This is also known as “thermal shock”.
In general, the thicker the glass, the more prone it will be to breaking due to the immediate differences in temperature across the thickness of glass.
Borosilicate glass is more tolerant of this, as it has a higher elasticity than standard silicon glass.
You may also note that laboratory test tubes and flasks are made with thinner walls, and of borosilicate glass, when designated for heating.