Propose a synthesis of the compound shown below starting with 4-methoxycinnamic acid. Use the Hunsdiecker reaction as one of the steps in your synthesis.
Answers
For the synthesis of ethyl trans-4-methoxycinnamate from 4-methoxy cinnamic acid, we can protect the carboxylic acid group through esterification, perform the Hunsdiecker reaction to introduce a bromine atom, and then substitute the bromine with an ethyl group.
To synthesize ethyl trans-4-methoxycinnamate starting from 4-methoxy cinnamic acid, we can follow the following steps:
The carboxylic acid group in 4-methoxy cinnamic acid needs to be protected to avoid unwanted reactions. This can be achieved by converting it into an ester.
We can react 4-methoxy cinnamic acid with an alcohol, such as methanol or ethanol, in the presence of a strong acid catalyst (e.g., sulfuric acid) to form the corresponding methyl or ethyl ester.
4-Methoxy cinnamic acid + Methanol (or Ethanol) → Methyl (or Ethyl) 4-methoxy cinnamate
The Hunsdiecker reaction is a useful transformation to convert carboxylic acids with a methylene group adjacent to the carboxyl group into the corresponding alkyl halides. In this case, we will convert the ethyl 4-methoxy cinnamate ester into the corresponding ethyl 4-methoxy cinnamate bromide.
Ethyl 4-methoxy cinnamate + Bromine (Br₂) + Carbon tetrachloride (CCl₄) → Ethyl 4-methoxy cinnamate bromide
To remove the bromine atom introduced in the previous step, we can perform an elimination reaction using a strong base. For example, treatment with potassium hydroxide (KOH) in an alcoholic solvent can lead to the elimination of bromine and the formation of the desired ethyl trans-4-methoxycinnamate.
Ethyl 4-methoxy cinnamate bromide + Potassium hydroxide (KOH) → Ethyl trans-4-methoxycinnamate
Learn more about carboxylic acid here:
https://brainly.com/question/29724691
#SPJ4
The complete question is:
Propose a synthesis of the compound ethyl trans-4-methoxycinnamate starting with 4-methoxy cinnamic acid. Use the Hunsdiecker reaction as one of the steps in your synthesis.
Related Questions
How many grams of silver chromate will precipitate when 150. mL of 0.500 M silver nitrate are added to 100. mL of 0.400 M potassium chromate?
Answers
Approximately 7.98 grams of silver chromate will precipitate when 150 mL of 0.500 M silver nitrate is added to 100 mL of 0.400 M potassium chromate.
To determine the amount of silver chromate that will precipitate when 150 mL of 0.500 M silver nitrate is added to 100 mL of 0.400 M potassium chromate, we need to identify the limiting reagent and calculate the corresponding amount of silver chromate formed.
First, we can calculate the number of moles of silver nitrate and potassium chromate using their respective concentrations and volumes:
Moles of silver nitrate = concentration × volume = 0.500 M × 0.150 L = 0.075 mol
Moles of potassium chromate = concentration × volume = 0.400 M × 0.100 L = 0.040 mol
From the balanced chemical equation:
2 AgNO3 + K2CrO4 → Ag2CrO4 + 2 KNO3
We can see that the stoichiometric ratio between silver nitrate and silver chromate is 2:1. Therefore, the moles of silver chromate formed will be half the moles of silver nitrate used:
Moles of silver chromate formed = 0.075 mol / 2 = 0.0375 mol
Finally, we can calculate the mass of silver chromate using its molar mass:
Mass of silver chromate = moles × molar mass = 0.0375 mol × (2 × 107.87 g/mol) = 7.98 g
For more such questions on silver chromate
https://brainly.com/question/2854033
#SPJ8
Which one of the following changes would cause the pressure of a gas to double assuming volume and moles were held constant?
A) Increasing the temperature from 20.0 °C to 40.0 °C.
B) Decreasing the temperature from 400 K to 200 K.
C) Increasing the temperature from 200K to 400K.
D) Decreasing the temperature from 40.0 °C to 20.0 °C.
Answers
Increasing the temperature from 200K to 400K would cause the pressure of a gas to double assuming volume and moles were held constant. Thus, option (C) is correct.
Pressure and Temperature have a direct relationship as determined by Gay-Lussac Law. As long as the volume is kept constant, pressure and temperature will both rise or fall together.
The pressure would also double if the temperature did. The energy of the molecules would increase with increased temperature, and more collisions would occur, increasing pressure.
It can also be understood by Ideal Gas Equation. The pressure of a gas is directly proportional to its temperature when volume and moles are constant, according to the ideal gas law (PV = nRT), where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature in Kelvin. As temperature increases, the average kinetic energy of the gas particles increases, leading to more frequent and forceful collisions with the container walls. Therefore, increasing the temperature from 200K to 400K would result in a doubling of the gas pressure.
To know more about Temperature here https://brainly.com/question/26866637
#SPJ4
Place the following substances in order of increasing boiling point. CH3CH2CH3 CH3OCH3 CH3CH2OH
CH3CH2CH3 < CH 3OCH 3 < CH 3 CH 20H
CH3CH 20H < CH3CH2CH3 < CH 3OCH 3
CH 3CH 20H < CH 3OCH 3 < CH3CH2CH3
CH 30CH 3 < CH3CH2CH3 < CH 3 CH 20H
CH3CH2CH3 < CH 3CH 20H < CH 3OCH 3
Answers
The substances should be placed in the following order of increasing boiling point: (d)
CH3OCH3 < CH3CH2CH3 < CH3CH2OH.
Boiling point is defined as the temperature at which the vapor pressure of a liquid becomes equal to the surrounding atmospheric pressure. A liquid with a higher boiling point will require more energy to turn into a gas compared to a liquid with a lower boiling point.Boiling points are influenced by intermolecular forces, which are the forces of attraction between molecules. The greater the intermolecular forces, the higher the boiling point of a substance. Here, we will look at the intermolecular forces of the three substances in question:
CH3CH2CH3: The intermolecular forces in butane are van der Waals forces or London dispersion forces. They are the weakest intermolecular force, and thus butane has the lowest boiling point of the three substances.
CH3OCH3: The intermolecular forces in dimethyl ether are dipole-dipole interactions and London dispersion forces. While dipole-dipole interactions are stronger than London dispersion forces, they are not as strong as hydrogen bonding. As a result, dimethyl ether has a lower boiling point than ethanol.
CH3CH2OH: The intermolecular forces in ethanol are hydrogen bonding and London dispersion forces. Hydrogen bonding is the strongest intermolecular force, and thus ethanol has the highest boiling point of the three substances.
In conclusion, the substances should be placed in the following order of increasing boiling point: CH3OCH3 < CH3CH2CH3 < CH3CH2OH.
To know more about boiling point visit:
https://brainly.com/question/5753603
#SPJ11
calculate the number of electrons in the conduction band for silicon at t ¼ 300 k. (assume m e =m 0 ¼ 1.)
Answers
Intrinsic semiconductors like silicon have a bandgap, which is the energy difference between the valence band (where electrons are bound) and the conduction band (where electrons are free to move and conduct electricity).
At absolute zero temperature (0 K), all electrons are in the valence band. As the temperature increases, some electrons acquire enough thermal energy to jump across the bandgap and occupy the conduction band. The number of electrons in the conduction band depends on the energy distribution of electrons, described by the Fermi-Dirac distribution function. For silicon at room temperature (300 K), which has a bandgap of approximately 1.12 eV, most electrons remain in the valence band since only a small fraction possesses sufficient thermal energy to reach the conduction band. The Fermi energy (E_F), which represents the energy level where there is a 50% probability of finding an electron occupied, is located close to the valence band energy level. Consequently, the number of electrons in the conduction band for silicon at 300 K is relatively low. While not exactly zero, it is considered negligible for practical purposes. The vast majority of electrons still reside in the valence band. Therefore, the conduction band of silicon at this temperature contains only a small fraction of the total number of electrons in the material.
Learn more about conduction band here : brainly.com/question/30890306
#SPJ11
identify the option below that is a characteristic of acidic solutions.
Answers
Answer:
- Acidic solutions have a sour taste.
- Acidic solutions turn damp blue litmus paper red.
- Acidic solutions can conduct electricity because they contain mobile ions.
Acidic solutions have several characteristics that differentiate them from other solutions. In this context, an acidic solution is defined as one that has a high concentration of hydrogen ions (H+) compared to hydroxide ions (OH-).
There are several characteristics of acidic solutions, including:
1. Acids have a sour taste
Acids have a sour taste, which is one of their most easily recognizable characteristics. Many sour-tasting foods and drinks are acidic, such as lemons, limes, and vinegar.
2. Acids react with bases to produce salts and water
Acids react with bases to produce salts and water, a process known as neutralization. For example, when hydrochloric acid (HCl) reacts with sodium hydroxide (NaOH), the products are sodium chloride (NaCl) and water (H2O).
3. Acids conduct electricity
Acids are good conductors of electricity because they contain ions that are free to move. This property makes them useful in many industrial processes, such as electroplating and battery production.
4. Acids change the color of indicators
Acids change the color of certain indicators, such as litmus paper, which turns red in the presence of an acid and blue in the presence of a base.
5. Acids have a pH less than 7
Acids have a pH less than 7 on the pH scale, which measures the concentration of hydrogen ions in a solution. The lower the pH, the higher the concentration of hydrogen ions and the more acidic the solution.
In conclusion, the above-mentioned are the characteristics of acidic solutions.
To know more about acidic solution refer here: https://brainly.com/question/12411990#
#SPJ11
Calculate the change in enthalpy associated with the combustion of 14.6 g of isooctane.
C8H18(l)+25O2(g)⟶8CO2(g)+9H2O(l)ΔHc=−5461kJmol
Answers
The change in enthalpy associated with the combustion of 14.6 g of isooctane is -699.9 kJ.
The enthalpy change of combustion, Δ[tex]\rm H_c[/tex], is the energy released when one mole of a substance is burned completely in excess oxygen.
The given equation shows the combustion of isooctane:
[tex]\rm C_8H_{18}(l)+25O_2(g) \rightarrow 8CO_2(g)+9H_2O(l)[/tex]
To calculate the change in enthalpy associated with the combustion of 14.6 g of isooctane, we need to first determine the number of moles of isooctane being burned.
[tex]\rm Number\ of \ moles\ of\ isooctane =\dfrac {mass \ of\ isooctane\ (g) } { molar \ mass \ of \ isooctane}[/tex]
[tex]\rm Number\ of \ moles\ of\ isooctane =\dfrac {14.6 \ g} { 114.23\ g}[/tex]
= 0.128 mol
Now, we can use the given value of ΔHc to calculate the change in enthalpy associated with the combustion of 0.128 mol of isooctane.
ΔH = Δ[tex]\rm H_c \times number\ of \ moles \ of \ isooctane[/tex]
ΔH = -5461 kJ/mol [tex]\times[/tex] 0.128 mol
ΔH = -699.9 kJ
The negative sign indicates that the reaction is exothermic, releasing energy to the surroundings.
Therefore, the calculated value of -699.9 kJ represents the amount of energy released (change in enthalpy) when 14.6 g of isooctane is burned completely in excess oxygen.
Learn more about enthalpy change here:
https://brainly.com/question/29556033
#SPJ12
1. Provide brief calculations to describe how you would make the following solutions in a test tube with a Mohr or serological pipette, using 0.150M CoCl, stock solution and deionized water:
0.030M CoCl:
0.060M CoCl,:
0.090M COCI,:
0.120M CoCl:
Answers
To prepare a 0.120M CoCl solution, take 8 mL of the 0.150M CoCl stock solution and add deionized water to make the total volume 10 mL.
To prepare the desired solutions using a stock solution of 0.150M CoCl and deionized water, you need to calculate the volumes of the stock solution and water required for each concentration.
Here are the calculations for each solution:
0.030M CoCl:
To make a 0.030M CoCl solution, you can use the formula:
C1V1 = C2V2
Where:
C1 = Concentration of stock solution
V1 = Volume of stock solution
C2 = Desired concentration
V2 = Total volume of final solution
Plugging in the values:
C1 = 0.150M
C2 = 0.030M
V2 = Total volume (unknown)
V1 = ?
0.150M * V1 = 0.030M * V2
V1 = (0.030M * V2) / 0.150M
Assuming you want to prepare a 10 mL solution, V2 would be 10 mL:
V1 = (0.030M * 10 mL) / 0.150M
V1 = 2 mL
So, to prepare a 0.030M CoCl solution, take 2 mL of the 0.150M CoCl stock solution and add deionized water to make the total volume 10 mL.
0.060M CoCl:
Following the same approach:
C1 = 0.150M
C2 = 0.060M
V2 = 10 mL
V1 = (0.060M * 10 mL) / 0.150M
V1 = 4 mL
To prepare a 0.060M CoCl solution, take 4 mL of the 0.150M CoCl stock solution and add deionized water to make the total volume 10 mL.
0.090M CoCl:
Using the same method:
C1 = 0.150M
C2 = 0.090M
V2 = 10 mL
V1 = (0.090M * 10 mL) / 0.150M
V1 = 6 mL
To prepare a 0.090M CoCl solution, take 6 mL of the 0.150M CoCl stock solution and add deionized water to make the total volume 10 mL.
0.120M CoCl:
Applying the formula again:
C1 = 0.150M
C2 = 0.120M
V2 = 10 mL
V1 = (0.120M * 10 mL) / 0.150M
V1 = 8 mL
Learn more about deionised water here, https://brainly.com/question/30529207
#SPJ11
how+many+milliliters+of+a+syrup+containing+85%+w/v+of+sucrose+should+be+mixed+with+150+ml+of+a+syrup+containing+60%+w/v+of+sucrose+to+make+a+syrup+containing+80%+w/v+ofsucrose?
Answers
To make a syrup containing 80% w/v of sucrose, a specific amount of a syrup containing 85% w/v of sucrose should be mixed with 150 ml of a syrup containing 60% w/v of sucrose.
Let's assume that x milliliters of the 85% w/v sucrose syrup should be mixed with the 150 ml of the 60% w/v sucrose syrup to obtain the desired 80% w/v sucrose syrup. To determine the amount of sucrose in the final mixture, we need to consider the sucrose content in each syrup. The 85% w/v syrup contains 85 grams of sucrose in 100 ml, so x milliliters of this syrup will contain (85/100) * x grams of sucrose.
Similarly, the 60% w/v syrup contains 60 grams of sucrose in 100 ml, so 150 ml of this syrup will contain (60/100) * 150 grams of sucrose. To find the total amount of sucrose in the mixture, we add the amount of sucrose from each syrup:
(85/100) * x + (60/100) * 150 = (80/100) * (x + 150)
Simplifying this equation allows us to solve for x, which represents the number of milliliters of the 85% w/v sucrose syrup needed to achieve the desired concentration.
Learn more about sucrose here: https://brainly.com/question/477537
#SPJ11
Which one of the following expressions is correct for the representation of Ca2+ (aq) concentration involved in the solubility product (Ksp) of Ca3(PO4)2 in the presence of 0.10 M of Na3PO4: 1. [Ca2+] = (Ksp/0.010)1/2 2. [Ca2+] = (Ksp/0.010)1/3 3. [Ca2+] = (Ksp/0.0010)1/2 4. [Ca2+] = (Ksp/0.0010)1/3
Answers
The correct expression for the representation of [tex]Ca^{2+}[/tex] (aq) concentration involved in the solubility product (Ksp) of Ca[tex]_3[/tex](PO[tex]_4[/tex])[tex]_2[/tex] in the presence of 0.10 M of Na[tex]_3[/tex]PO[tex]_4[/tex] is [ [tex]Ca^{2+}[/tex] ] = (Ksp/0.0010)1/3. The correct answer is option 4.
The solubility product (Ksp) of Ca[tex]_3[/tex](PO[tex]_4[/tex])[tex]_2[/tex] can be expressed as:
Ca[tex]_3[/tex](PO[tex]_4[/tex])[tex]_2[/tex] ⇌ 3 [tex]Ca^{2+}[/tex] (aq) + 2[tex]PO_4^{3-}[/tex] (aq)
The ionic product of Ca[tex]_3[/tex](PO[tex]_4[/tex])[tex]_2[/tex] can be given as:
Qsp = [ [tex]Ca^{2+}[/tex] ][tex]_3[/tex][Na[tex]_3[/tex]PO[tex]_4[/tex] ][tex]_2[/tex]
Ksp is the solubility product constant, which is the ionic product of the substance when the solution is saturated with it. If a precipitate forms, the product of the concentrations of the ions raised to their stoichiometric coefficients will be equal to the Ksp value.
The reaction quotient Qsp can be given as:
Qsp = [ [tex]Ca^{2+}[/tex] ][tex]_3[/tex][Na[tex]_3[/tex]PO[tex]_4[/tex] ][tex]_2[/tex]
For the given reaction, if Na[tex]_3[/tex]PO[tex]_4[/tex] is present at a concentration of 0.10 M, then [[tex]PO_4^{3-}[/tex]] = 3 × 0.10 = 0.30 M
At equilibrium, the amount of Ca[tex]_3[/tex](PO[tex]_4[/tex])[tex]_2[/tex] that dissolves must produce a concentration of 3[[tex]Ca^{2+}[/tex]] equal to 0.30 M.
Since there are two phosphate ions in the formula unit of Ca[tex]_3[/tex](PO[tex]_4[/tex])[tex]_2[/tex], each mole of Ca[tex]_3[/tex](PO[tex]_4[/tex])[tex]_2[/tex] that dissolves produces 3 × (1/3) = 1 mole of [tex]Ca^{2+}[/tex].
Therefore,[ [tex]Ca^{2+}[/tex] ] = (0.30/3) = 0.10 M
Now, the solubility product expression can be written as:
Ksp = [ [tex]Ca^{2+}[/tex] ][tex]_3[/tex][[tex]PO_4^{3-}[/tex]][tex]_2[/tex]
Substituting the values of [ [tex]Ca^{2+}[/tex] ] and [Na[tex]_3[/tex]PO[tex]_4[/tex] ] gives:
Ksp = (0.10)[tex]_3[/tex](0.30)[tex]_2[/tex]
Ksp = 0.00027 M5/0.0010 = 5([tex]10^{-3}[/tex])
Therefore, [ [tex]Ca^{2+}[/tex] ] = (Ksp/0.0010)1/3.
Therefore, option 4. [ [tex]Ca^{2+}[/tex] ] = (Ksp/0.0010)1/3 is the correct answer.
Learn more about solubility products here:
https://brainly.com/question/31598456
#SPJ11
in the nuclear transmutation represented by 23994 pu( 42 he, 10 n)?, what is the product?
Answers
The nuclear transmutation you mentioned, represented by 23994 Pu (42 He, 10 N), refers to the bombardment of a plutonium-239 nucleus (Pu) with a helium-4 nucleus (He) and a neutron (N).
This process is typically referred to as a nuclear reaction rather than transmutation. To determine the product of this reaction, we need to consider the conservation of mass and atomic numbers. Let's break down the reaction:
Plutonium-239 (94 protons, 239 nucleons) + Helium-4 (2 protons, 4 nucleons) + Neutron (0 protons, 1 nucleon)
In this reaction, the total atomic number on the left side is 94 + 2 + 0 = 96, and the total nucleon number is 239 + 4 + 1 = 244.
To determine the product, we need to find an element with atomic number 96. This corresponds to Curium (Cm) on the periodic table. Therefore, the product of the reaction is Curium-244 (96 protons, 244 nucleons):
24496 Cm
Learn more about nuclear transmutation here : brainly.com/question/30078683
#SPJ11
if the rate law for the reaction 2a 3b ¬ products is first order in a and second order in b, then the rate law is rate = ____
Answers
If the rate law for the reaction 2A + 3B → products is first order in A and second order in B, then the rate = k[A]^1[B]^2
The rate law for a chemical reaction describes the relationship between the concentrations of reactants and the rate of the reaction. In the case of the reaction 2A + 3B → products, if the rate law is first order in A and second order in B, the rate law can be expressed as rate = k[A]^1[B]^2.
This means that the rate of the reaction is directly proportional to the concentration of A raised to the power of 1 and the concentration of B raised to the power of 2.
The exponent represents the reaction order with respect to each reactant. In this scenario, A has a first-order dependence, indicating that a doubling of A's concentration will result in a doubling of the reaction rate. B has a second-order dependence, meaning that a doubling of B's concentration will lead to a four-fold increase in the reaction rate.
The rate constant, k, incorporates the specific rate of the reaction and is determined experimentally. By knowing the rate law, scientists can better understand the kinetics of the reaction and manipulate the reaction conditions to achieve desired reaction rates.
Learn more about rate law here, https://brainly.com/question/26127112
#SPJ11
A chemistry graduate student is studying the rate of this reaction: →2HIg+H2gI2g He fills a reaction vessel with HI and measures its concentration as the reaction proceeds: time (seconds) 0,0.10,0.2,0.3,0.4 and HI conentration to match the seconds: 0.01 M,0.00286 M,0.00167 M,0.00118M,9.09x10^-4 M. Use this data to answer the following questions. write the rate law for this reaction calculate the value of the rate constant k
Answers
The value of the rate constant (k) is -0.00714 M/s. Note that the negative sign indicates the rate is decreasing with time.
To determine the rate law for the given reaction and calculate the value of the rate constant (k), we need to analyze the concentration changes of HI over time.
Time (s): 0, 0.10, 0.2, 0.3, 0.4
HI concentration (M): 0.01, 0.00286, 0.00167, 0.00118, 9.09x10⁻⁴
To determine the rate law, we need to analyze how the concentration of HI changes with time. We can look at the initial rates of the reaction using the data provided
Initial rate = Δ[HI] / Δt
Using the first two data points (t=0s and t=0.10s)
Initial rate = (0.00286 M - 0.01 M) / (0.10 s - 0 s) = -0.00714 M/s
From the given balanced equation, we can see that the stoichiometric coefficient of HI is 1, so the rate law can be written as
Rate = k [HI]ᵃ
Now, to determine the value of the rate constant (k), we need to choose two data points and solve for k.
Let's choose the first two data points (t=0s and t=0.10s)
Rate = k [HI]ᵃ
Using the initial rate calculated earlier and the initial HI concentration
-0.00714 M/s = k (0.01 M)ᵃ
Using the second data point (t=0.10s)
Rate = k [HI]ᵃ
-0.00714 M/s = k (0.00286 M)ᵃ
By dividing the two equations
(-0.00714 M/s) / (-0.00714 M/s) = (0.01 M)ᵃ / (0.00286 M)ᵃ
1 = (0.01 M / 0.00286 M)ᵃ
Taking the logarithm of both sides
log(1) = log[(0.01 M / 0.00286 M)ᵃ]
0 = a × log(0.01 M / 0.00286 M)
Now, we can solve for a
0 = a × log(0.01 M / 0.00286 M)
Since log(0.01 M / 0.00286 M) ≠ 0, the only possible solution is a = 0.
Therefore, the rate law for this reaction is Rate = k [HI]⁰, which simplifies to Rate = k.
Since the rate constant (k) does not depend on the concentration of HI, we can calculate the value of k using any data point
Rate = k [HI]⁰
-0.00714 M/s = k (0.01 M)⁰
-0.00714 M/s = k
To know more about rate constant here
https://brainly.com/question/20305922
#SPJ4
What is the oxidation number of nitrogen in the nitrate ion NO31−?
a. +6
b. +5
c. +3
d. +2
Answers
The oxidation number of nitrogen in the nitrate ion (NO₃⁻) is +5. To determine the oxidation number, we assign a hypothetical charge to each element in the compound based on its electronegativity and known rules.
In NO₃⁻, oxygen is assigned an oxidation number of -2, since it typically exhibits a -2 charge in most compounds. Since there are three oxygen atoms in NO₃⁻, the total charge from the oxygen atoms is -6.
The overall charge of the nitrate ion is -1, so the sum of the oxidation numbers of all the atoms in the ion must equal -1. Therefore, to balance out the charge, nitrogen must have an oxidation number of +5.
We can calculate this by using the equation:
(+5) + (-6) = -1
Hence, the correct answer is b. +5.
Learn more about oxidation number here : brainly.com/question/29100691
#SPJ11
during the columbian exchange, indigenous peoples of the americas were introduced .beavers.
Answers
During the Columbian Exchange, the indigenous peoples of the Americas were introduced to beavers.
What was the Columbian Exchange?The Columbian Exchange was a period of biological exchange between the Old and New Worlds that took place after Christopher Columbus' voyages to the Americas in 1492. This exchange had a significant impact on the development of both the Old and New Worlds.
Beavers are large rodents known for their ability to build dams, canals, and lodges using branches, sticks, and mud. They are found in North America, Europe, and Asia.W
Learn more about Columbian Exchange at:
https://brainly.com/question/23357547
#SPJ11
What is the boiling point of a solution composed of 15.0 g of urea, (NH2)2CO, in 0.500 kg of water? ___
Molar mass of urea = 60.6 g/mol kbp = 0.5121 °C/m Boiling point of water = 100.00 °C
Answers
The boiling point of the solution composed of 15.0 g of urea in 0.500 kg of water is approximately 100.25 °C.
To determine the boiling point of the solution, we need to calculate the change in boiling point caused by the addition of urea.
First, let's calculate the molality (m) of the urea solution:
m = moles of solute / mass of solvent (in kg)
moles of urea = mass of urea / molar mass of urea
= 15.0 g / 60.6 g/mol
= 0.247 moles
mass of water = 0.500 kg
m = 0.247 moles / 0.500 kg
m = 0.494 mol/kg
Next, we can calculate the change in boiling point (ΔTb) using the equation:
ΔTb = kbp x m
ΔTb = 0.5121 °C/m x 0.494 mol/kg
ΔTb = 0.2529 °C
Finally, we can determine the boiling point of the solution:
Boiling point of solution = Boiling point of water + ΔTb
Boiling point of solution = 100.00 °C + 0.2529 °C
Boiling point of solution ≈ 100.25 °C
Therefore, the boiling point of the solution composed of 15.0 g of urea in 0.500 kg of water is approximately 100.25 °C.
To know more about boiling point follow the link:
https://brainly.com/question/1514229
#SPJ4
Which of the following compounds would have a linear molecular geometry? 1. N2 2. H2S 3. CO2
(Show work on scratch paper)
A. 1 and 2 only B. 1.2 and 3 C. 2 and 3 only D. 1 and 3 only E. neither 1.2 or 3
Answers
Compounds would have a linear molecular geometry are: N₂ and CO₂
D. 1 and 3 only.
A linear molecular geometry occurs when all the atoms in a molecule lie in a straight line. To determine which of the compounds listed would have a linear molecular geometry, we need to examine their Lewis structure and the arrangement of their atoms.
N₂:
In the case of nitrogen gas (N₂), the Lewis structure consists of a triple bond between the two nitrogen atoms (N≡N). Since there are no lone pairs of electrons on either nitrogen atom, the molecule has a linear molecular geometry. Therefore, N₂ has a linear molecular geometry.
H₂S:
Hydrogen sulphide (H₂S) consists of two hydrogen atoms bonded to a sulphur atom. The Lewis structure of H₂S shows a lone pair of electrons on the sulphur atom. This lone pair causes a repulsion, distorting the molecular shape. As a result, the molecule adopts a bent or V-shaped molecular geometry, not a linear geometry. Therefore, H₂S does not have a linear molecular geometry.
CO₂:
Carbon dioxide (CO₂) consists of a carbon atom double-bonded to two oxygen atoms. The Lewis structure of CO₂ reveals that there are no lone pairs of electrons on the carbon atom. The molecule has a linear arrangement, with the carbon atom in the centre and the two oxygen atoms on either side. Thus, CO₂ has a linear molecular geometry.
Therefore,
N₂ has a linear molecular geometry.
H₂S does not have a linear molecular geometry.
CO₂ has a linear molecular geometry.
To know more about linear molecule here
https://brainly.com/question/16770400
#SPJ4
If the rate of change of Cl2 is –0.0425M/s, what is the rate of change of NO?
2NO(g)+Cl2(g)2NOCl(g)
Answers
The rate of change of Cl2, represented as d[Cl2]/dt, is given as -0.0425 M/s. To determine the rate of change of NO, we can use the stoichiometry of the balanced chemical equation 2NO(g) + Cl2(g) -> 2NOCl(g).
According to the stoichiometry, the ratio of the rate of change of Cl2 to the rate of change of NO is 1:2. This means that for every one mole of Cl2 consumed, two moles of NO are consumed or produced. Therefore, the rate of change of NO, d[NO]/dt, can be calculated by multiplying the rate of change of Cl2 by the stoichiometric coefficient ratio:
d[NO]/dt = 2 * d[Cl2]/dt
= 2 * (-0.0425 M/s)
= -0.085 M/s
Therefore, the rate of change of NO is -0.085 M/s.
Based on the given rate of change of Cl2, the rate of change of NO in the reaction 2NO(g) + Cl2(g) -> 2NOCl(g) is -0.085 M/s. This means that for every second, the concentration of NO decreases by 0.085 M. The negative sign indicates a decrease in concentration, as expected since Cl2 is being consumed in the reaction. The stoichiometry of the balanced equation allowed us to determine the ratio between the rate of change of Cl2 and NO, and by applying this ratio, we obtained the rate of change of NO.
To know more about moles visit:
brainly.com/question/30885025
#SPJ11
The following questions pertain to a 2.2 M solution of hydrocyanic acid at 25°C. Be Hapka = 9.21 at 25°C. ubong Owena. Find the concentrations of all species present in the solution at equilibrium. 3b. Find the pH of the solution. sol o c. Identify the strongest base in this system
Answers
The concentration of all species present in the solution at equilibrium is;
[H3O+] = [CN-] = 4.5 × 10⁻³ M
[HCN] = 2.2 - x ≈ 2.2 M.
The pH of the solution is 2.35.The strongest base in this system is CN-.
According to the given question, we have; 2.2 M solution of hydrocyanic acid at 25°C. Be Hapka = 9.21 at 25°C.
Step 1 - Finding the Concentrations of all Species in the Solution at Equilibrium.
To find the concentrations of all species present in the solution at equilibrium, we have to use the ionization equation of the acid which is;
HCN (aq) + H2O (l) ⇌ H3O+ (aq) + CN- (aq)
As we can see from the equation that the hydrocyanic acid ionizes in water to produce hydronium ion (H3O+) and cyanide ion (CN-). So, the concentration of all species present in the solution at equilibrium is given below:
[H3O+] = [CN-] = x[HCN] = 2.2 - x
Note that, "x" is the extent of ionization.
Step 2 - Finding the pH of the Solution
The pH of the solution can be found by using the formula;
pH = -log [H3O+]
Where [H3O+] is the hydronium ion concentration in the solution.
To find [H3O+], we have to apply the equilibrium law of the reaction which is given as;Be
Hapka = [H3O+][CN-]/[HCN]
Substituting the values in the above equation;
9.21 = x²/(2.2 - x)
Let's assume, x << 2.2 [∵ It is a weak acid] So,
9.21 = x²/2.2or,
x² = 9.21 × 2.2or,
x² = 20.262or,
x = √20.262 = 4.5 (approx.) So,
[H3O+] = x = 4.5 × 10⁻³ M
Putting this value in the formula;
pH = -log [H3O+]
pH = -log (4.5 × 10⁻³)
pH = 2.35
Therefore, the pH of the solution is 2.35.
Step 3 - Identifying the Strongest Base in this System
The strongest base in this system is CN-. This is because;
CN- + H2O ⇌ HCN + OH-
The hydroxide ion (OH-) is a stronger base than CN- but it is not present in the system. Therefore, CN- is the strongest base in this system.
Therefore, the concentration of all species present in the solution at equilibrium is;
[H3O+] = [CN-] = 4.5 × 10⁻³ M
[HCN] = 2.2 - x ≈ 2.2 M.
The pH of the solution is 2.35.The strongest base in this system is CN-.
To know more about strongest base visit:
https://brainly.com/question/30461556
#SPJ11
.Complete the following reactions and then write the net ionic equation for each reaction.
A. Ba(NO3)2 + K2SO4
Answers
Answer: The net ionic equation for the reaction B a ( N O 3 ) 2 + K 2 S O 4 is Ba2+ (aq) + SO42- (aq) → BaSO4 (s).
Explanation: The given chemical equation is: Ba( N O 3 ) 2 + K 2 S O 4 → 2 K N O 3 + B a S O 4Ba(NO3)2 and K2SO4 can react with each other to form KNO3 and BaSO4.Here, the Balanced molecular equation is: Ba(NO3)2(aq) + K2SO4(aq) → 2KNO3(aq) + BaSO4(s)
Now, for net ionic equation, we will have to remove the spectator ions. Spectator ions are those ions which are present on both the sides of the reaction. In the above reaction, the ions K+ and NO3- are present on both the sides. So, they will be removed.
The balanced chemical equation for the reaction of Ba(NO3)2 + K2SO4 is given below:Ba(NO3)2 + K2SO4 → BaSO4 + 2KNO3The balanced chemical equation shows that the reaction of Ba(NO3)2 with K2SO4 will produce BaSO4 and KNO3 as products.
The net ionic equation is obtained by removing the spectator ions (ions that do not participate in the reaction). Ba2+ and SO42- ions combine to produce an insoluble solid, BaSO4. Thus, the net ionic equation for the reaction of Ba(NO3)2 + K2SO4 is Ba2+(aq) + SO42-(aq) → BaSO4(s). It is important to balance the equation first before writing the ionic equation.
Net Ionic equation: Ba2+ (aq) + SO42- (aq) → BaSO4 (s)
Hence, the net ionic equation for the reaction B a ( N O 3 ) 2 + K 2 S O 4 is Ba2+ (aq) + SO42- (aq) → BaSO4 (s).
Learn more about net ionic equation here https://brainly.com/question/19705645
#SPJ11
Write the ground state electron configuration for the following species:
Express your answer in condensed form in order of increasing orbital energy as a string without blank space between orbitals. For example, [He]2s22p2 should be entered as [He]2s²2p^2.
1. Ni
2. Ni²⁺
3. Mn
4. Mn⁴⁺
5. Y
6. Y⁺
7. Ta
8. Ta²⁺
Answers
Ni: [Ar] 4s² 3d⁸,Ni²⁺: [Ar] 3d⁸,Mn: [Ar] 4s² 3d⁵,Mn⁴⁺: [Ar] 3d³,Y: [Kr] 5s² 4d¹,Y⁺: [Kr] 4d¹,Ta: [W] 6s² 5d²,Ta²⁺: [W] 5d²
In condensed form, the electron configuration for an atom is written as a series of orbitals, with the number of electrons in each orbital indicated by a superscript. The orbitals are arranged in order of increasing energy, with the s orbitals first, followed by the p orbitals, then the d orbitals, and finally the f orbitals.
The ground state electron configuration for an atom is the lowest energy configuration that the atom can have. For most atoms, the ground state configuration is the one that is most stable. However, for some atoms, the ground state configuration is not the most stable. In these cases, the atom can undergo a chemical reaction to form a more stable ion.
In the case of Ni, for example, the ground state configuration is [Ar] 4s² 3d⁸. However, Ni can also form the Ni²⁺ ion, which has the ground state configuration [Ar] 3d⁸. The Ni²⁺ ion is more stable than the Ni atom because it has a full d subshell.
The same principle applies to the other atoms in the list. In each case, the ground state configuration is the one that has the lowest energy and is therefore the most stable.
To learn more about orbital energy here brainly.com/question/14944601
#SPJ11
Give the structures of the substitution products expected when 1-bromohexane reacts with:
1.NaOCH2CH3
Answers
When 1-bromohexane reacts with sodium ethoxide (NaOCH2CH3), a nucleophilic substitution reaction takes place. The ethoxide ion (CH3CH2O-) acts as a nucleophile and replaces the bromine atom in 1-bromohexane.
When 1-bromohexane reacts with sodium ethoxide (NaOCH2CH3), a nucleophilic substitution reaction occurs. The ethoxide ion (CH3CH2O-) acts as a nucleophile, attacking the carbon atom bonded to the bromine atom in 1-bromohexane. The bromine atom is replaced by the ethoxy group (-OCH2CH3), resulting in the formation of a new compound.
The product of this reaction is 1-hexanol, which has the chemical formula CH3(CH2)4CH2OH. In the substituted product, the bromine atom is replaced by a hydroxyl group (-OH). The ethoxy group is attached to the carbon atom previously bonded to the bromine.
The reaction proceeds via an SN2 (substitution nucleophilic bimolecular) mechanism, where the nucleophile attacks the carbon atom and simultaneously displaces the leaving group (bromine). The resulting product is an alcohol, specifically 1-hexanol, which contains a hydroxyl group at the sixth carbon of the hexane chain.
Overall, the reaction between 1-bromohexane and sodium ethoxide yields 1-hexanol as the substitution product.
Learn more about substitution reaction here, https://brainly.com/question/10143438
#SPJ11
Briefly describe the difference in the aromatic region between the starting material and product. How many hydrogen atoms should be integrated for in the spectrum of biphenyl? (Consult Chapter 14 - NMR Spectroscopy of Bruice 8th Ed. and discuss these questions with your Pod Instructor for guidance. Table 14.1 on p. 629 is pasted below for your reference.)
Answers
The difference in the aromatic region between the starting material and product is that the NMR spectrum of biphenyl would show two sets of signals, each representing the protons on each benzene ring, while the NMR spectrum of bromobenzene would show a single set of signals for the protons on the benzene ring. The NMR spectrum of biphenyl would integrate six hydrogen atoms.
Nuclear Magnetic Resonance (NMR) spectroscopy is an analytical method used to determine the structure of organic compounds. The NMR spectrum of biphenyl would integrate six hydrogen atoms. Biphenyl is a compound made up of two benzene rings joined together. In the aromatic region, the NMR spectrum of biphenyl would show two sets of signals, each representing the protons on each benzene ring. The signal for the protons on the ortho and para positions of each ring would be more de-shielded than the signal for the meta protons due to the ring current effect. The ring current effect is the magnetic field created by the delocalization of π electrons in the aromatic ring.
The starting material for the synthesis of biphenyl is bromobenzene, which is a mono-substituted benzene. In the NMR spectrum of bromobenzene, there would be a single set of signals for the protons on the benzene ring. The signal for the proton on the ortho position would be more de-shielded than the signal for the meta protons, but the para protons would be the most shielded. This is because the bromine atom is an electron-withdrawing group, which deactivates the ring towards electrophilic substitution. Therefore, the proton on the para position is less likely to be substituted, making it the most shielded.
In conclusion, the difference in the aromatic region between the starting material and product is that the NMR spectrum of biphenyl would show two sets of signals, each representing the protons on each benzene ring, while the NMR spectrum of bromobenzene would show a single set of signals for the protons on the benzene ring. The NMR spectrum of biphenyl would integrate six hydrogen atoms.
know more about NMR spectrum,
https://brainly.com/question/30465398
#SPJ11
Which of the following compounds is least soluble in hexane (CH3CH2CH2CH2CH2CH3)?
a. methanol (CH3OH) O b. ethanol (CH3CH2OH) c. 1-propanol (CH3CH2CH2OH) d. 1-butanol (CH3CH2CH2CH2OH) e. 1-pentanol (CH3CH2CH2CH2CH2OH)
Answers
Answer: Which of the following compounds is least soluble in hexane (CH3CH2CH2CH2CH2CH3)?
a. methanol (CH3OH) O b. ethanol (CH3CH2OH) c. 1-propanol (CH3CH2CH2OH) d. 1-butanol (CH3CH2CH2CH2OH) e. 1-pentanol (CH3CH2CH2CH2CH2OH)
Explanation:)
Solubility is a term used to describe how well a substance dissolves in another. It can be measured by the amount of solute that can be dissolved in a certain amount of solvent to form a saturated solution.
Hexane (CH3CH2CH2CH2CH2CH3) is a nonpolar organic compound, which means that it is best able to dissolve other nonpolar compounds.Methanol (CH3OH), ethanol (CH3CH2OH), 1-propanol (CH3CH2CH2OH), 1-butanol (CH3CH2CH2CH2OH), and 1-pentanol (CH3CH2CH2CH2CH2OH) are all polar organic compounds, which means that they are less soluble in hexane than nonpolar compounds. However, as the length of the carbon chain in the alcohol increases, the solubility of the compound in hexane increases as well. This is because longer carbon chains have more nonpolar regions that can interact with the nonpolar hexane molecules. Therefore, methanol (CH3OH) is the least soluble in hexane (CH3CH2CH2CH2CH2CH3) due to its high polarity. Methanol is a polar compound that can dissolve in polar solvents such as water, but it has very low solubility in nonpolar solvents such as hexane.
To know more about Methanol visit:
https://brainly.com/question/31428749
#SPJ11
Write balanced net ionic equations for the three reactions carried out in Part A given that the sulfur-containing product is the bisulfate anion.
1) KMnO4+NaOH+ Na2S2O3
2) KMnO4+Na2S2O3
3) KMnO4+H2SO4+Na2S2O3
Answers
(1) 2MnO4- + 6H2O + 5S2O3^2- -> 2MnO2 + 4SO4^2- + 10OH- ,(2) 2MnO4- + 5S2O3^2- + 2H2O -> 2MnO2 + 4SO4^2- + 4OH- , (3) 2MnO4- + 5S2O3^2- + 6H+ -> 2Mn^2+ + 4SO4^2- + 3S + 3H2O. balanced reaction.
In the first reaction, KMnO4, NaOH, and Na2S2O3 are the reactants. The net ionic equation shows only the species that are directly involved in the reaction and undergo a change. Here, the bisulfate anion (HSO4-) is the sulfur-containing product.
In the second reaction, KMnO4 and Na2S2O3 are the reactants. Again, the net ionic equation includes only the species directly involved in the reaction. The bisulfate anion (HSO4-) is the sulfur-containing product.
In the third reaction, KMnO4, H2SO4, and Na2S2O3 are the reactants. The net ionic equation includes only the species directly involved in the reaction. The bisulfate anion (HSO4-) is the sulfur-containing product.
The balanced net ionic equations for the three reactions, with the sulfur-containing product as the bisulfate anion (HSO4-), have been provided. These equations represent the chemical changes that occur in the reactions, focusing on the key species involved.
To know more about balanced , visit:
https://brainly.com/question/11904811
#SPJ11
calculate de broglie wavelength of an electron of a lamborghini at its top speed of 350 km/h
Answers
The de Broglie wavelength of an electron in a Lamborghini traveling at its top speed of 350 km/h is calculated to be approximately 1.45 x 10^-38 meters.
According to the de Broglie wavelength equation, the wavelength of a particle is inversely proportional to its momentum. The momentum of an electron can be calculated using its mass and velocity. However, in this case, the velocity of the Lamborghini is given, and we need to convert it to the velocity of the electron.
To convert the velocity of the Lamborghini (350 km/h) to the velocity of the electron, we need to consider the mass ratio between the two. The mass of an electron is approximately 9.109 x [tex]10^{-31}[/tex]kilograms, while the mass of a Lamborghini is much larger. As a result, the velocity of the electron will be negligibly small compared to the velocity of the Lamborghini.
Since the velocity of the electron is extremely small, the de Broglie wavelength will be extremely large, approaching values close to zero. In fact, the calculated de Broglie wavelength of an electron in a Lamborghini at its top speed is approximately 1.45 x 10^-38 meters, which is an incredibly small value. This indicates that the wave-like behavior of the electron is negligible under these conditions and that its particle nature dominates.
Learn more about wavelength here: https://brainly.com/question/31326088
#SPJ11
This reaction is endothermic.
C(s)+CO2(g)=>2CO(g)
Predict the effect (shift right, shift left, or no effect) of increasing and decreasing the reaction temperature. How does the value of the equilibrium constant depend on temperature?
Answers
Increasing the reaction temperature will shift the reaction to the right, while decreasing the reaction temperature will shift the reaction to the left. Equilibrium constant (K) for the reaction is temperature-dependent.
Effect of increasing temperature:
In an endothermic reaction, increasing the temperature provides more energy to the system. According to Le Chatelier's principle, the system will respond by shifting the equilibrium in the direction that consumes heat, which is the forward reaction in this case (shift right). As a result, the concentration of CO and the overall yield of the reaction will increase.
Effect of decreasing temperature:
Decreasing the temperature reduces the energy available to the system. To compensate for the decrease in energy, the system will shift the equilibrium in the direction that releases heat, which is the reverse reaction in this case (shift left). Consequently, the concentration of CO2 and the overall yield of the reaction will increase.
Dependence of equilibrium constant on temperature:
The equilibrium constant (K) is a measure of the extent of the reaction at a given temperature. For an endothermic reaction, increasing the temperature favors the forward reaction, resulting in an increase in the value of K. Conversely, decreasing the temperature favors the reverse reaction and leads to a decrease in the value of K.
Increasing the reaction temperature shifts the equilibrium to the right, favoring the formation of CO. Decreasing the temperature shifts the equilibrium to the left, favoring the formation of CO2. The equilibrium constant (K) for the reaction is dependent on temperature and increases with an increase in temperature for an endothermic reaction.
To know more about Equilibrium, visit:
https://brainly.com/question/18849238
#SPJ11
construct a cu2 /cu−ag /ag cell with a positive cell potential in the voltaic cells interactive to answer the questions. which way are electrons flowing through the external circuit?
a.no movement
b.left to right
c.right to left
Answers
The way from right to left are electrons flowing through the external circuit. Option C is correct.
In a voltaic cell, electrons flow from the anode (where oxidation occurs) to the cathode (where reduction occurs) through the external circuit.
In the given cell, the Cu²⁺/Cu half-cell is the anode, and the Ag/Ag⁺ half-cell is the cathode. This means that oxidation occurs at the Cu electrode, where Cu²⁺ ions are reduced to Cu atoms, while reduction occurs at the Ag electrode, where Ag⁺ ions are reduced to Ag atoms.
Since electrons always flow from the anode to the cathode in a voltaic cell, means right to left.
Electrons are flowing from the Cu electrode (anode) to the Ag electrode (cathode) in the external circuit.
Hence, C. is the correct option.
To know more about voltaic cell here
https://brainly.com/question/1370807
#SPJ4
which element is reduced in this reaction? 2cr(oh)3 3ocl− 4oh−→2cro4−2 3cl− 5h2o
Answers
In the given reaction: [tex]2Cr(OH)_3 + 3OCl^- + 4OH^- \rightarrow 2CrO_4^{2-} + 3Cl^- + 5H_2O[/tex], the element that undergoes reduction is chromium (Cr).
Reduction is a process in which an element gains electrons or decreases its oxidation state. To determine the reduction, we compare the oxidation states of chromium in the reactants and products.
In[tex]Cr(OH)_3[/tex], chromium has an oxidation state of +3, while in [tex]CrO_4^{2-}[/tex] chromium has an oxidation state of +6. The increase in the oxidation state indicates a loss of electrons. Since reduction involves the gain of electrons, we can conclude that chromium is reduced in this reaction.
On the other hand, chlorine ([tex]Cl[/tex]) maintains an oxidation state of -1 in both the reactants ([tex]OCl^-[/tex]) and products ([tex]Cl^-[/tex]), suggesting it does not undergo reduction or oxidation. Therefore, chromium is the element that undergoes reduction in this reaction. Hence the element that undergoes reduction is chromium ([tex]Cr[/tex]).
To learn more about elements, refer to the link:
https://brainly.com/question/6258301
#SPJ4
Which regions of DNA are used for identification of different species? Select one: a. highly conserved b. highly variable c. positive controls d. primary 2. In PCR, what is used to separate the two DNA chains in the double helix? Select one: a. nucleotides b. high heat c. gel d. primers 3.Why is the sample heated to almost the boiling point in PCR? Select one: a. primers attach to DNA 4. What is special about the DNA polymerase used in PCR? Select one: a. denatures, or separates, DNA b. can withstand high temperatures c. attaches to either side of target DNA d. can withstand low temperatures b. new nucleotides attach to DNA strand c. the DNA denatures, or separates d. the DNA strands pair up 5. Name the apparatus that will heat and cool the PCR sample. Select one: a. DNA thermocycler b. automatic DNA sequencer c. PCR tubes d. buccal swab
Answers
The highly variable region of DNA is used for identification of different species. In PCR, high heat is used to separate the two DNA chains in the double helix.The sample is heated to almost the boiling point in PCR so that the DNA denatures or separates.The DNA polymerase used in PCR can withstand high temperatures.The apparatus that will heat and cool the PCR sample is called DNA thermocycler.
PCR stands for polymerase chain reaction. It is a technique used in molecular biology to amplify a single copy or a few copies of a segment of DNA across several orders of magnitude, creating millions or billions of copies of a particular DNA sequence. PCR is now a common and essential technique used in medical and biological research laboratories for a variety of applications.
Learn more about DNA polymerase here:
https://brainly.com/question/29585040
#SPJ11
Part A
Write balanced molecular equation for the reaction between nitric acid and calcium hydroxide.
Part B
Enter a net ionic equation for the reaction between nitric acid and calcium hydroxide.
Answers
Part A: The balanced molecular equation for the reaction between nitric acid (HNO3) and calcium hydroxide (Ca(OH)2) is 2 HNO3(aq) + Ca(OH)2(aq) → Ca(NO3)2(aq) + 2 H2O(l).
Part B: The net ionic equation for the reaction between nitric acid and calcium hydroxide is 2 H+(aq) + 2 OH-(aq) → 2 H2O(l).
Part A:
To write the balanced molecular equation, we first need to identify the formulas of the reactants and products. Nitric acid is represented by HNO3, and calcium hydroxide is represented by Ca(OH)2.
The balanced molecular equation is obtained by ensuring that the number of atoms of each element is the same on both sides of the equation. In this case, we have 2 hydrogen (H) atoms, 1 nitrogen (N) atom, 3 oxygen (O) atoms, 1 calcium (Ca) atom, and 2 hydroxide (OH) ions.
2 HNO3(aq) + Ca(OH)2(aq) → Ca(NO3)2(aq) + 2 H2O(l)
Part B:
The net ionic equation represents the reaction without including the spectator ions. In this case, the spectator ions are the calcium (Ca2+) and nitrate (NO3-) ions.
When nitric acid and calcium hydroxide react, the hydrogen ions (H+) from nitric acid combine with the hydroxide ions (OH-) from calcium hydroxide to form water molecules.
The net ionic equation for the reaction is:
2 H+(aq) + 2 OH-(aq) → 2 H2O(l)
The net ionic equation focuses on the species directly involved in the reaction, omitting the spectator ions that do not participate in the chemical changes.
To learn more about balanced molecular equation, refer:
brainly.com/question/1889840
#SPJ11