a) The total cost allocated to each product and the cost per unit using the activity-based costing system are given in the table below: Products Tab A 35 Gen X 20 Zen G 50 Direct materials cost $750,000.00 $1,000,000.00 $1,750,000.00 Direct labor cost $390,000.00 $310,000.00 $280,000.00 Material moves $187,500.00 $100,000.00 $75,000.00 (Materials moves per unit x cost driver rate)
Direct labor hours $292,500.00 $58,500.00 $234,000.00 (DLH per unit x cost driver rate) Power $460,000.00 $276,000.00 $184,000.00 (Power per unit x cost driver rate) Engineering $137,500.00 $100,000.00 $75,000.00 (ECN per unit x cost driver rate)
Total cost allocated $2,217,500.00 $1,844,500.00 $2,518,000.00 Cost per unit $887.00 $922.25 $2,518.00
Calculation of the cost driver rate for the Material and handling is as follows;
Material and Handling = Total material handling cost / Total Material moves = $900,000/3000 = $300
Materials moves cost per unit for Tab A 35 = 1250 * 300 = $375,000
Materials moves cost per unit for Gen X 20 = 1000 * 300 = $300,000
Materials moves cost per unit for Zen G 50 = 750 * 300 = $225,000
Calculation of the cost driver rate for the Engineering cost is as follows;
Engineering cost = Total Engineering cost / Total Engineering change notices (ECN)
Engineering cost per unit for Tab A 35 = 275 * 1,500 = $412,500
Engineering cost per unit for Gen X 20 = 200 * 1,500 = $300,000
Engineering cost per unit for Zen G 50 = 150 * 1,500 = $225,000
Calculation of the cost driver rate for the Power cost is as follows;
Power cost = Total Power cost / Total Kilowatt hours
Power cost per unit for Tab A 35 = 25,000 * 23.2 = $580,000
Power cost per unit for Gen X 20 = 15,000 * 23.2 = $348,000
Power cost per unit for Zen G 50 = 10,000 * 23.2 = $232,000
b) The cost allocated to each product and the cost per unit using the traditional system are given in the table below:
Product Tab A 35 Gen X 20 Zen G 50 Direct materials cost $750,000.00 $1,000,000.00 $1,750,000.00
Direct labor cost $390,000.00 $310,000.00 $280,000.00
Direct labor hours $292,500.00 $58,500.00 $234,000.00 (DLH per unit x labor rate)
Overhead costs $780,000.00 $624,000.00 $546,000.00 (Overhead rate per DLH x DLH per unit)
Total cost allocated $2,212,500.00 $1,992,500.00 $2,810,000.00 Cost per unit $885.00 $996.25 $2,810.00
c) In the activity-based costing system, more cost pools are created than the traditional system. The cost is allocated based on activities and not on one cost driver. Thus, the activity-based costing system is more reliable than the traditional system.
For more question on product
https://brainly.com/question/25922327
#SPJ8
All partners in general partnerships have the rights below, except O a. to participate in management. O b. to bring an action for an accounting. O c. to inspect partnership records. O d. to receive a salary.
All partners in general partnerships have the following rights, except option D) receiving a salary.
In general partnerships, each partner has the right to participate in the management of the partnership and bring an action for accounting. Furthermore, all partners have the right to inspect the partnership's records, which are an important aspect of their participation in the management of the partnership.
The partners do not have the right to receive a salary for their work in the partnership, as this would conflict with the nature of a partnership. Instead, the profits of the partnership are shared among the partners according to the agreement between them. This is a fundamental feature of the partnership form of business organization. The partners are also personally liable for the debts of the partnership, which is another feature of the partnership form.
To know more about partnerships visit :
brainly.com/question/32058917
#SPJ11
XYZ Industries is expected to generate the above free cash flows over the next five years, after which free cash flows are expected to grow at a rate of 1% per year. If the weighted average cost of capital is 7% and XYZ has cash of $14 million, debt of $42 million, and 60 million shares outstanding, what is General Industries' expected current share price? Round to the nearest one-hundredth.
To calculate the expected current share price of XYZ Industries, we need to determine the present value of the future free cash flows and adjust for the company's cash and debt.
1. Calculate the present value of the expected free cash flows:
- Year 1: $18 million / (1 + 0.07)^1 = $16.82243 million
- Year 2: $20 million / (1 + 0.07)^2 = $17.47274 million
- Year 3: $22 million / (1 + 0.07)^3 = $17.71033 million
- Year 4: $24 million / (1 + 0.07)^4 = $17.81325 million
- Year 5: $26 million / (1 + 0.07)^5 = $17.85473 million
2. Calculate the present value of the cash and debt:
- Present value of cash: $14 million
- Present value of debt: $42 million / (1 + 0.07)^5 = $32.89376 million
3. Calculate the total present value of the company's equity:
Total equity value = Present value of free cash flows + Present value of cash - Present value of debt
Total equity value = $16.82243 million + $17.47274 million + $17.71033 million + $17.81325 million + $17.85473 million + $14 million - $32.89376 million
Total equity value = $70.77872 million
4. Calculate the expected share price:
Share price = Total equity value / Number of shares outstanding
Share price = $70.77872 million / 60 million shares
Share price ≈ $1.17965
Therefore, the expected current share price of XYZ Industries is approximately $1.18 (rounded to the nearest one-hundredth).
To know more about share visit-
brainly.com/question/15969699
#SPJ11
Mozart borrowed a mortgage loan of $143,200. The loan terms require monthly payments for 20 years at an APR of 4.75 percent, compounded monthly. What is the amount of each mortgage payment? $925.39 $937.37 O $11.248.43
The amount of each mortgage payment is $925.39 is the answer.
Given: Mozart borrowed a mortgage loan of $143,200, Monthly payments required for 20 years, APR = 4.75%, compounded monthly
To Find: Amount of each mortgage payment
Monthly payments are calculated using the formula; P = L[c(1 + c)n]/[(1 + c)n - 1] where L is the loan amount, P is the monthly payment, n is the number of payments, and c is the periodic interest rate.
Substituting the given values, Loan amount, L = $143,200APR = 4.75% compounded monthly= 0.0475/12 = 0.00395833 (Periodic interest rate)
Number of payments, n = 20 years * 12 months/year= 240
Periodic interest rate, c = 0.00395833
Substitute the given values in the formula, P = 143200[0.00395833(1 + 0.00395833)240]/[(1 + 0.00395833)240 - 1]≈ $925.39
Hence, the amount of each mortgage payment is $925.39.
know more about mortgage loan
https://brainly.com/question/28290141
#SPJ11
Answer all parts (a) to (e) of this question.
If a firm produces quantities qu and q2 of two goods, its total cost is:
C = q1 + q1^2 +q2^2 - aq1q2
The goods are sold in competitive markets at prices p1 > 1 and p2.
(a) [10 marks] Write down an expression for the profit of the firm. Obtain and provide an economic interpretation for the first-order profit-maximising conditions.
(b) [10 marks] Using the Cramer's rule, find the quantities g and q2 that satisfy the first order conditions.
(c) [10 marks] Find the second-order conditions for profit maximisation. For what values of a are the second-order conditions satisfied?
(a) [10 marks) Assume the secondforder condition is satisfied. Use calculus to determine the way in which the supply of good 2 varies with a rise in p1. Explain why it depends on the sign of a.
(e) [10 marks] Assume the second-order condition is satisfied. If p1 = 0.5 and p2 = 1, under which condition about a will good 1 be supplied by the firm? Explain the economic intuition behind the
results.
The expression for the profit of the firm is given by
π(q1, q2) = p1q1 + p2q2 - (q1 + q1^2 + q2^2 - aq1q2)
To find the first-order profit-maximizing conditions, we differentiate the profit function with respect to q1 and q2 and equate to zero.
∂π/∂q1 = p1 - 2q1 + aq
2 = 0 ---(1)∂π/∂q
2 = p2 - 2q2 + aq
1 = 0 ---(2)
(b) Using Cramer's rule,
We have:
∆ = |p1 -2 q1 aq2 ||p2 -2q2 aq
1| = (p1 + aq2)(p2 + aq1) - 2aq1q2 ∆q
1 = |p1 -2q1 aq2||p2 -2q2 aq
1| = (p2 + aq1)(p1 + aq2) - 2aq1q
2g = ∆q1/∆, q2 = ∆q2/∆
To find the second-order conditions for profit maximization, we differentiate the profit function twice, as follows:
π11 = -2,
π22 = -2,
π12 = a
For the second-order conditions to be satisfied, we require that π11 < 0, and
∆ > 0 and π11π22 - π12^2 > 0i.e., -2 < 0, and -4 + a^2 > 0 ⇒ a^2 > 4 ⇒ |a| > 2.
Therefore, the second-order conditions are satisfied for |a| > 2.(d) Now, a is the measure of the interdependence between the goods; if the goods are substitutes, then a < 0, and if they are complements, then a > 0. If a < 0, then dq2/dp1 > 0, meaning that an increase in the price of good 1 leads to an increase in the quantity supplied of good 2. This is because the increase in the price of good 1 leads to an increase in the demand for good 2 since the goods are substitutes. Similarly, if a > 0, then dq2/dp1 < 0, meaning that an increase in the price of good 1 leads to a decrease in the quantity supplied of good 2. This is because the increase in the price of good 1 leads to a decrease in the demand for good 2 since the goods are complements.
To know more about profit visit:
https://brainly.com/question/32381738
#SPJ11
A firm faces the demand curve: P = 3,291-1Q. What is the firm's revenue maximizing price? Enter as a value (round to two decimal places if necessary). Tim Atte 41
For the given demand curve P = 3,291-1Q, the firm's revenue-maximizing price is approximately $1,645.5.
To determine the firm's revenue-maximizing price, we need to find the price level that maximizes total revenue. Total revenue (TR) is calculated by multiplying the price (P) by the quantity (Q) sold.
Given the demand curve equation P = 3,291 - Q, we can substitute it into the total revenue formula to express TR as a function of Q:
TR = P * Q = (3,291 - Q) * Q
To find the revenue-maximizing price, we need to find the quantity that maximizes the total revenue function. We can achieve this by finding the quantity where the derivative of the total revenue function with respect to Q is equal to zero.
Let's differentiate TR with respect to Q:
d(TR)/dQ = 3,291 - 2Q
Setting the derivative equal to zero and solving for Q:
3,291 - 2Q = 0
2Q = 3,291
Q = 3,291 / 2
Q = 1,645.5
Now that we have the quantity (Q), we can substitute it back into the demand curve equation to find the revenue-maximizing price (P):
P = 3,291 - Q
P = 3,291 - 1,645.5
P ≈ 1,645.5
Learn more about revenue-maximizing here:
https://brainly.com/question/31361184
#SPJ11
the value of the stock decreased by 3.2very month, and now my investment is worth only $587. how much did i originally invest? round to the nearest cent.
You originally invested approximately $815.32. To calculate the original investment, we can set up the equation: original investment - (3.2 * number of months) = $587.
Solving this equation, we find that the number of months is approximately 71.66 months. Since it is unlikely to have fractional months, we round this down to 71 months. Substituting the value back into the equation, we get: original investment - (3.2 * 71) = $587. By rearranging the equation, we find that the original investment is approximately $815.32. The original investment, we can set up the equation: original investment - (3.2 * number of months) = $587. Therefore, You originally invested approximately $815.32.
Learn more about original investment here:
https://brainly.com/question/30859337
#SPJ11
Consider total cost and total revenue given in the following table Quantity 0 2 3 4 5 6 7 Total cost $8 9 10 11 13 19 27 37 Total revenue $0 8 16 24 32 40 48 56 a. Calculate profit for each quantity. How much should the firm produce to maximize profit? b. Calculate marginal revenue and marginal cost for each quantity. Graph them. (Hint Put the points between whole numbers. For example, the marginal cost between 2 and 3 should be graphed at 2n) At what quantity do these curves cross? How does this relate to your answer to part (a)? c. Can you tell whether this firm is in a competitive industry? If so, can you tell whether the industry is in a long-run equilibrium?
a. To maximize profit, the firm should produce the quantity that yields the highest profit, which in this case is 6 units. b. The marginal cost and marginal revenue curves cross at quantity 6. c. We cannot definitively determine whether the firm is in a competitive industry or not.
a. To calculate the profit for each quantity, we subtract the total cost from the total revenue for each quantity. The table (a) is attached.
To maximize profit, the firm should produce the quantity that yields the highest profit, which in this case is 6 units.
b. Marginal revenue (MR) is the change in total revenue when one additional unit is produced. Marginal cost (MC) is the change in total cost when one additional unit is produced. We can calculate the marginal revenue and marginal cost in the table (b) attached.
Graphing the marginal revenue and marginal cost curves
Marginal revenue remains constant at $8 for all quantities.
Marginal cost increases at a constant rate until quantity 6, where it jumps from $6 to $8.
The marginal cost and marginal revenue curves cross at quantity 6.
This intersection point is significant as it represents the quantity at which the firm maximizes its profit (as calculated in part a).
c. Based on the given information, we cannot definitively determine whether the firm is in a competitive industry or if the industry is in a long-run equilibrium. This information does not provide details about the market structure, the number of competitors, or the presence of barriers to entry.
To know more about maximize profit here
https://brainly.com/question/31852625
#SPJ4
The Zhao Family's utility function is U(x, y) = 4 ln x + 11 In y, where • x = quantity of essential goods the family purchases per month. • y = quantity of luxury goods the family purchases per month. The average cost/unit of essential goods and luxury goods are • Cx = $10 • Cy = $80 respectively, and the family's monthly budget is B = $4800. The utility-maximizing quantity of essential goods for the Zhao Family is found by solving the equation ... a. 240 +0.875x = 0 b. 4/x - 1.375 / 60 - 0.125x = 0 c. 4 ln x + 11 ln(60 - 0.125x) = 0 d. 4/x + 11 / 60 - 0.125x =0
The utility-maximizing quantity of essential goods for the Zhao Family can be found by solving the equation given in the options. Looking at the options, option c, 4 ln x + 11 ln(60 - 0.125x) = 0, represents the correct equation.
To understand why option c is the correct equation, let's analyze the utility function and the constraints of the problem. The utility function U(x, y) = 4 ln x + 11 ln y represents the family's satisfaction or happiness, where x is the quantity of essential goods and y is the quantity of luxury goods purchased per month.
The family's budget constraint is given by the equation Cx * x + Cy * y = B, where Cx is the average cost per unit of essential goods, Cy is the average cost per unit of luxury goods, and B is the monthly budget. In this case, the budget constraint can be written as 10x + 80y = 4800.
To find the utility-maximizing quantity of essential goods, we need to maximize the utility function U(x, y) while satisfying the budget constraint. This can be done using the Lagrange multiplier method or by substituting one equation into the other.
In this case, by substituting the budget constraint equation into the utility function equation, we get 4 ln x + 11 ln(60 - 0.125x) = 0. This equation represents the optimization problem of maximizing utility subject to the budget constraint.
Therefore, option c, 4 ln x + 11 ln(60 - 0.125x) = 0, represents the equation that needs to be solved to find the utility-maximizing quantity of essential goods for the Zhao Family.
To know more about Budget visit-
brainly.com/question/32075347
#SPJ11
Consider the following note payable transactions of Caldwell Video Productions.
2014: Apr. 1 Purchased equipment costing $198,000 by issuing a nine-year, 8% note payable. The note requires annual principal payments of $22,000 plus interest each Apr. 1
Dec. 31 Accured interest on the note payable
2015: Apr .1 Paid the first installment on the note
Dec. 31 Accured interest on the note payable
1. Journalize the transactions for the company.
2. Considering the given transactions only, what are Caldwell Video Production's total liabilities on December 31, 2015?
Caldwell Video Production's total liabilities on December 31, 2015, are $193,840.
Journalizing the transactions:
Apr. 1, 2014:
Equipment (debit) $198,000
Note Payable (credit) $198,000
Dec. 31, 2014:
Interest Expense (debit) $15,840
Interest Payable (credit) $15,840
Apr. 1, 2015:
Note Payable (debit) $22,000
Cash (credit) $22,000
Dec. 31, 2015:
Interest Expense (debit) $17,840
Interest Payable (credit) $17,840
Caldwell Video Production's total liabilities on December 31, 2015, would include the remaining balance of the note payable and the accrued interest payable. Since the note payable has a nine-year term with annual principal payments of $22,000, the remaining balance after one payment would be $198,000 - $22,000 = $176,000. Additionally, the accrued interest payable on December 31, 2015, would be $17,840. Therefore, the total liabilities would be $176,000 (remaining note payable) + $17,840 (accrued interest payable) = $193,840.
To know more about installment, here
https://brainly.com/question/28452224
#SPJ4
Wiater Company operates a small manufacturing facility. On January 1, 2021, an asset account for the company showed the following balances: Equipment : $ 160,000
Accumulated Depreciation (beginning of the year) : 100,000 During the first week of January 2021, the following cash expenditures were incurred for repairs and maintenance: Routine maintenance and repairs on the equipment : $ 1,850 Major overhaul of the equipment that improved efficiency : 24,000
The equipment is being depreciated on a straight-line basis over an estimated life of 15 years with a $10,000 estimated residual value. The annual accounting period ends on December 31. Required: Indicate the effects (accounts, amounts, and + for increase and – for decrease) of the following two items on the accounting equation, using the headings shown below. (Enter any decreases to Assets, Liabilities, or Stockholders' Equity with a minus sign. Do not round intermediate calculations.) 1. The adjustment for depreciation made last year at the end of 2020. 2. The two expenditures for repairs and maintenance during January 2021.
1, The adjustment for depreciation made last year decreased both the Accumulated Depreciation and Retained Earnings accounts by $10,000 each. 2, The expenditures for repairs and maintenance in January 2021 decreased the Stockholders' Equity by $1,850 and $24,000, and the Cash account by the same amounts.
1, The adjustment for depreciation made last year at the end of 2020:
Determine the depreciation expense for the year:
Depreciation Expense = (Cost of equipment - Residual value) / Useful life
= ($160,000 - $10,000) / 15
= $10,000
Debit the Depreciation Expense account and credit the Accumulated Depreciation account:
Accumulated Depreciation: -$10,000
Retained Earnings: -$10,000
2, The two expenditures for repairs and maintenance during January 2021:
Debit the Repairs and Maintenance Expense account and credit the Cash account for each expenditure:
Routine maintenance and repairs: -$1,850
Major overhaul of equipment: -$24,000
These transactions do not directly impact the accounting equation since they involve expense recognition and cash payment. However, they will affect the net income and cash flow of the company.
To know more about Cash flow:
https://brainly.com/question/27994727
#SPJ4
Question 12 According to the straight-line depreciation method, an equal amount of depreciation expense is assigned to each year of the asset useful life. True O False
According to the straight-line depreciation method, an equal amount of depreciation expense is assigned to each year of the asset useful life. Hence, the statement is true.
Depreciation refers to the reduction in the value of an asset over time, as it wears out or becomes obsolete. Depreciation is considered an important part of accounting as it allocates the cost of the asset over its useful life. Depreciation expense is the cost of an asset that is allocated over its useful life. In the straight-line depreciation method, an equal amount of depreciation expense is assigned to each year of the asset's useful life.
Therefore, the statement is True. In the straight-line method, the annual depreciation expense is determined by dividing the cost of the asset by the number of useful years of the asset. This depreciation method is commonly used because it is straightforward and easy to apply.
To learn more about Depreciation visit here:
brainly.com/question/14736663
#SPJ11
If last year’s NFO is $103116, the current year’s free cash flow is $65577, current year’s net financial income is $12650 and current year’s net dividends are $16560, what is the current year’s NFO?
Current year’s NFO can be calculated by adding current year’s free cash flow to the current year’s net financial income and subtracting the current year’s net dividends from it. Therefore, the current year’s NFO is calculated as follows :
Current year’s NFO = Free cash flow + Net financial income - Net dividends= $65577 + $12650 - $16560= $61667
Thus, the current year’s NFO is $61667.
The net financial outcome (NFO) is an accounting metric that represents the difference between a company's financial revenues and costs. The net financial result may be a positive or negative value. The net financial outcome is arrived at by subtracting financial costs from financial income. The financial expenses, financial revenues, and the net financial result are the three components of the profit and loss statement that reveal a company's financial outcomes.
The financial outcome may be the main metric used to assess a company's ability to earn money from its financial investments. If the current year's net financial income is $12650 and the net dividends for the current year are $16560, the company's free cash flow would be $65577, and the previous year's net financial outcome was $103116. To calculate the current year's NFO, add the current year's free cash flow to the current year's net financial income and subtract the current year's net dividends from it, resulting in $61667. Therefore, the current year's NFO is $61667.
To know more about cash visit:
https://brainly.com/question/30588084
#SPJ11
On January 1, 2021, Parent Co. acquired 80% of the ordinary shares of Subsidiary Co. for P1,000,000. At the time of acquisition, Subsidiary's Ordinary shares, share premium and retained earnings were P100,000, P400,000 and P500,000 respectively. Any excess of cost over the carrying amount was attributable to goodwill.
The following income statement data were prepared by Parent and Subsidiary on December 31, 2022
Parent Subsidiary
Sales P 300,000 P 600,000
Other income 15,000 40,000
Cost of goods sold 320,000 180,000
Operating expenses 150,000 32,000
During 2017, no dividends were declared by either company. On January 1, 2017, Parent purchased a machine from Subsidiary for P40,000. The carrying amount of the machine in the books of Subsidiary Co. was P25,000. The total life of the machine was 12 years and the expired life was 7 years with no residual value.
Since the purchase date, Subsidiary Co. bought merchandise from Parent Co. and the selling price of Parent Co. was 125% on cost. Sales during the year 2017 totaled P150,000. The inventory held by Subsidiary Co. was P15,000 on January 1, 2022 and P18,000 on December 31, 2022.
What is the amount of goodwill to be reported on January 1, 2021 in the consolidated statement of financial position?
A. 300,000 B. 250,000 C. 200,000 D. 150,000
The amount of goodwill to be reported on January 1, 2021 in the consolidated statement of financial position would be C. P 200, 000.
How to find the goodwill ?The purchase price of the shares of Subsidiary Co. by Parent Co. was P1,000,000 for an 80% stake. The value of the net assets (equity) of Subsidiary Co. at the time of acquisition was the sum of the ordinary shares, share premium, and retained earnings, which is :
= P100,000 + P 400,000 + P500,000
= P 1, 000,000
Goodwill is calculated as the difference between the purchase price and the fair market value of the net assets acquired.
Goodwill = Purchase price - Fair market value of net assets acquired
Goodwill = P 1, 000,000 - P800,000
Goodwill = P 200,000
Find out more on goodwill at https://brainly.com/question/30637745
#SPJ4
Define an indifference curve? Explain the properties of an indifference curve.
Indifference curve is a curve that shows the combination of two products that are equally preferred to the consumer.
Properties of indifference curve are given below:Properties of an indifference curveThe properties of the indifference curve are as follows:1. Indifference curve sloping downwards: An indifference curve slopes downward from left to right. The slope of the indifference curve is called the marginal rate of substitution.
The MRS between X and Y measures the amount of good Y that must be given up to obtain an additional unit of good X while keeping the level of satisfaction constant. 2. Convex to the origin: The indifference curve is always convex to the origin. The marginal rate of substitution diminishes as the consumer moves down along the indifference curve, which implies that the consumer is willing to give up less and less of one good to obtain more and more of another good.
To know more about indifference curve. here
https://brainly.com/question/24302783
#SPJ11
If the price of K declines, the demand curve for complementary product J: a. shifts to the left. b. decreases. c. shifts to the right d. remains unchanged
If the price of product K declines, the demand curve for complementary product J will shift to the right. The correct answer is C.
Complementary products are two products that are consumed together. In other words, their demand is linked. If the price of one product changes, the demand for its complementary product will also change. Let's understand this with the help of an example.
Suppose that products A and B are complementary products. If the price of product A declines, consumers will be more likely to purchase product A. Due to this increase in demand, the demand for its complementary product, B, will also increase. As a result, the demand curve for complementary product B will shift to the right. Therefore, if the price of product K declines, the demand curve for complementary product J will shift to the right.
To know more about demand curve visit:
https://brainly.com/question/13131242
#SPJ11
Two alternatives, A and B, have been identified, and the associated costs and revenues have been estimated. Annual fixed costs would be $40,000 for A and $30,000 for B; variable costs per unit would be $10 for A and $11 for B; and revenue per unit would be $15.
a. Determine each alternative’s break-even point in units.
b. Atwhatvolumeofoutputwouldthetwoalternativesyieldthesameprofit?
c. If expected annual demand is 12,000 units, which alternative would yield the higher profit?
a. Determine each alternative’s break-even point in units.
Alternative A:
Fixed costs: $40,000
Variable cost per unit: $10
Revenue per unit: $15
To calculate the break-even point in units:
Break-even point in units = Fixed costs / Contribution margin per unit
Contribution margin per unit = Revenue per unit - Variable cost per unit
Contribution margin per unit for alternative A = $15 - $10 = $5
Break-even point in units = $40,000 / $5 = 8,000 units
Alternative B:
Fixed costs: $30,000
Variable cost per unit: $11
Revenue per unit: $15
To calculate the break-even point in units:
Break-even point in units = Fixed costs / Contribution margin per unit
Contribution margin per unit = Revenue per unit - Variable cost per unit
Contribution margin per unit for alternative B = $15 - $11 = $4
Break-even point in units = $30,000 / $4 = 7,500 units
b. At what volume of output would the two alternatives yield the same profit?
To find the volume of output at which the two alternatives yield the same profit, we need to find the point where the total costs and total revenues for the two alternatives are equal.
Total cost for alternative A = Fixed cost + Variable cost per unit * Number of units
Total cost for alternative B = Fixed cost + Variable cost per unit * Number of units
Let's set the two total cost equations equal to each other:
$40,000 + $10Q = $30,000 + $11Q
$1Q = $10,000
Q = 10,000 units
So at 10,000 units, the two alternatives would yield the same profit.
c. If the expected annual demand is 12,000 units, which alternative would yield the higher profit?
For Alternative A:
At 12,000 units, total revenue = 12,000 * $15 = $180,000
Total cost = $40,000 + ($10 * 12,000) = $160,000
Profit = Total revenue - Total cost = $180,000 - $160,000 = $20,000
For Alternative B:
At 12,000 units, total revenue = 12,000 * $15 = $180,000
Total cost = $30,000 + ($11 * 12,000) = $162,000
Profit = Total revenue - Total cost = $180,000 - $162,000 = $18,000
Therefore, Alternative A would yield a higher profit.
To know more about break-even point visit:
https://brainly.com/question/32507413
#SPJ11
Read the EU White Paper on Transport. Write a critical summary of the report. 1) State whether the targets are realistic; 2) State whether the targets benefit the people. Support your arguments with transport economics theory
The EU White Paper on Transport indicates a robust policy framework that is designed to enhance the sustainability of the EU transportation system. In the paper, there are a number of targets that are set to be achieved by the year 2050. However, the critical question is whether these targets are realistic and whether they benefit the people.
The targets set by the EU White Paper on Transport are undoubtedly ambitious, particularly in terms of their scope and time horizon. The EU’s desire to reduce the CO₂ emissions of the transport sector by 60% by 2050 is a positive goal. Nevertheless, achieving this target would require a significant shift in the transport system, including an increased reliance on renewable energy and a reduction in private vehicles.
While this is not impossible, it is a significant challenge, particularly given the current trajectory of technological progress. Therefore, it may not be practical to achieve such a significant reduction in CO₂ emissions over the next few decades. The targets set in the EU White Paper on Transport benefit people in several ways. First, the policy framework has the potential to lead to significant environmental benefits.
In particular, reducing emissions from transport would help to mitigate the effects of climate change, which is one of the greatest threats facing humanity. Secondly, the proposed measures could help to reduce congestion in urban areas, which would lead to a more efficient and effective transport system. Finally, the increased use of public transport would provide people with greater accessibility and mobility, which could improve their overall quality of life.
Therefore, transport policy should be designed to promote economic efficiency and social welfare. This can be achieved through measures such as pricing strategies, investment in infrastructure, and the promotion of sustainable modes of transport. Overall, the targets set in the EU White Paper on Transport are achievable, and they have the potential to provide significant benefits to people and the environment.
You can learn more about transportation systems at: brainly.com/question/28223131
#SPJ11
Get new FaceTime features, SharePlay. and Live Text. Question 1. An economy has the following production function: Y = K¹/²(LE) ¹/2 Some more additional details known about the economy: The savings rate (s) is equal to 0.3. The population growth rate (n) is equal to 0.02. The rate of growth of technology (g) is 0.03. Depreciation rate (8) is at 0.05. (a) Does this production function have constant returns to scale? Explain. (b) Derive the function of output per effective worker in terms of capital per effective worker. (c) Find the steady state levels of capital per effective worker, output per effective worker and the marginal product of capital. (d) If the output per effective worker is constant in the steady state, what does it imply about the growth rates of output per worker and the total output? Explain. (e) Using your answer from part (c), determine whether the steady state capital per effec- tive worker is at Golden Rule level. How do you know? (f) What are some of the policies governments can enact to increase the nation's savings rate? (g) Assume that the government successfully brought the savings rate up to 0.4. Would such an increase be enough to take the economy to the Golden Rule level? Explain.
This production function doesn't have constant returns to scale since the exponent on the capital stock is less than 1, which means an increase in both labor and capital can lead to a less than proportional increase in output.
(b) Y/L = K/L 1/2. Or y = k 1/2. We can derive the output per effective worker by dividing both sides by L, which yields y/L = k 1/2/L = K/L 1/2. Hence, output per effective worker can be expressed as K/L 1/2.
(c) Steady-state level of capital per effective worker can be found by setting the change in capital per effective worker equal to zero.
The result will be that s(k 1/2)(L) (1/2) = (8 + n + g)k.
Then k = [s/(8+n+g)] 2*L and y = s*[k 1/2]*(L 1/2) = s{[s/(8 + n + g)] 2*L}^1/2 or Y/L = [s/ (8 + n + g)] 2*k/L.
The marginal product of capital (MPK) is the extra output produced by one extra unit of capital, which is equal to Y/K in the steady-state and (s/2)(K/L 1/2) in the steady-state.
(d) It implies that the growth rate of output per worker is equal to zero, while the growth rate of total output is equal to the rate of population growth.
(e) K* = [s/(8 + n + g)]*L. To figure out whether this is at the Golden Rule level, we must calculate MPK* and compare it to the depreciation rate. [tex]MPK* = s(K*^1/2)(L^1/2) = [s^2/(8 + n + g)]*L^(1/2)[/tex]. Since the denominator is less than s^2, the MPK* is greater than the depreciation rate, implying that the economy is below the Golden Rule level.
(f) Encourage foreign investment, Develop pension plans, Encourage education, and Issue savings bonds. There are other strategies, too.
(g) It will be enough to achieve the Golden Rule level because K* is proportional to the square root of s. As a result, K* is greater than K*. The MPK* is then less than the depreciation rate, which implies that K* is greater than the Golden Rule level. Therefore, increasing the savings rate from 0.3 to 0.4 would suffice to achieve the Golden Rule level.
Learn more about constant returns to scale:
https://brainly.com/question/27402839
#SPJ11
The CBA Corporation is considering a new credit policy. The current policy is cash only. The new policy would involve extending credit of 'Net 30'. Based on the following information, determine if a switch in credit policy is advisable. The interest rate is 3 percent per month:
Current Policy New Policy
Price per unit RM 200 RM 200
Cost per unit RM 150 RM 150
Sales per month 1500 units 1700
units
Based on the information, it is advisable to switch in credit policy.
The given problem states that The CBA Corporation is considering a new credit policy. The current policy is cash only. The new policy would involve extending credit of 'Net 30'. Based on the given data below, let's find out whether a switch in credit policy is advisable.
Price per unit: RM 200
Cost per unit: RM 150
Sales per month: 1500 units (Current policy), 1700 units (New policy)
Interest rate: 3 percent per month
Sales revenue per month under the current policy = Price x Sales = 200 x 1500 = RM 300,000
Sales revenue per month under the new policy = Price x Sales = 200 x 1700 = RM 340,000
Under the current policy, the CBA Corporation has sales of RM 300,000 per month and no bad debts since the current policy is cash only. But under the new policy, the sales increase to RM 340,000 per month.
Bad debts under the new policy are unknown, but let us assume it to be 2% of sales.
Bad debts = 2% x Sales = 0.02 x 340000 = RM 6,800
The cost of goods sold (COGS) remains the same under both policies, i.e., RM 150 x 1500 units = RM 225,000
Therefore, the profit under the current policy is:
Profit under current policy = Sales - COGS
= 300,000 - 225,000
= RM 75,000
The profit under the new policy is:
Profit under new policy = Sales - COGS - Bad debts - Interest
= 340,000 - 225,000 - 6,800 - (0.03 x 340,000)
= 115,200
Hence, the profit under the new policy is higher than the profit under the current policy. Therefore, a switch in credit policy is advisable. The CBA Corporation should consider implementing the new policy involving extending credit of 'Net 30.'
To learn more about policy: https://brainly.com/question/26055567
#SPJ11
Provide arguments why should policymakers use fiscal and monetary instruments to control aggregate demand and stabilize the economy. If so, when? If not, why not? Explain the three reasons the AD curve slopes downward. Give an example of an event that would shift the AD curve. Which way would this event shift the curve?
Policymakers should use fiscal and monetary instruments to control aggregate demand and stabilize the economy because it allows them to influence economic activity and counteract fluctuations in the business cycle.
This is particularly important during periods of economic instability or when there is a risk of inflation or recession.
Fiscal policy involves government spending and taxation, while monetary policy involves controlling the money supply and interest rates. By adjusting these instruments, policymakers can affect consumer spending, investment, and overall demand in the economy.
During times of high inflation or overheating, policymakers can use contractionary fiscal and monetary measures to reduce aggregate demand and prevent excessive price increases. Conversely, during periods of recession or low demand, expansionary fiscal and monetary policies can stimulate spending and boost economic activity.
The downward slope of the aggregate demand (AD) curve is explained by three reasons:
Wealth Effect: As the price level decreases, the purchasing power of wealth increases, leading to higher consumption spending and an increase in aggregate demand.
Interest Rate Effect: A decrease in the price level lowers the demand for money, which leads to a decrease in interest rates, stimulating investment and increasing aggregate demand.
International Trade Effect: A decrease in the price level makes domestic goods relatively cheaper compared to foreign goods, leading to an increase in exports and higher aggregate demand.
An example of an event that would shift the AD curve is a decrease in consumer confidence due to a financial crisis.
This event would shift the AD curve to the left, indicating a decrease in aggregate demand. As consumers become more cautious and reduce their spending, the overall demand for goods and services in the economy decreases, leading to a leftward shift in the AD curve.
For more question on Policymakers visit:
https://brainly.com/question/30629142
#SPJ11
One of your friend borrows $100000 from bank to start a new company. He needs to make annual equal payments for the next 7years at an interest rate of 8% per year.
Find the annual equal payments using compound interest tables.
The annual equal payments using compound interest tables is $16,016.02.
Compound interest formula A = P(1 + r/n)nt
Where,
A = Amount
P = Principal amount (initial investment)
r = Annual nominal interest rate (as a decimal)
n = Number of times the interest is compounded per year
t = Number of years
Compound interest tables are used to determine the compound amount, interest rate, or period from a given principal amount and interest rate by using some predetermined factors.
To find the annual equal payments using compound interest tables, we can use the compound interest formula stated above.
Substituting the given values, we have:
P = $100000
r = 8% per annumn
= 1
t = 7 years
Let A be the amount of each payment.
We can rewrite the formula as:
A = P(r/n) / [1 - (1 + r/n)-nt]
Substituting the given values, we have:
A = $100000(0.08/1) / [1 - (1 + 0.08/1)-1(7)]
A = $100000(0.08) / [1 - (1.08)-7]
A = $100000(0.08) / (0.508328)
A = $16016.02
Hence, the annual equal payments using compound interest tables is $16,016.02. This means that your friend will have to make payments of $16,016.02 annually for the next 7 years at an interest rate of 8% per annum.
Learn more about compound interest -
brainly.com/question/28960137
#SPJ11
fallweather enterprises stock has an expected return of 15 percent and a beta of 1.3. the market return is 11 percent and the risk-free rate is 1.8 percent. this stock is because the capm return for the stock is percent. a. undervalued; 16.10 b. priced correctly; 15 c. overvalued; 16.10 d. overvalued; 13.76 e. undervalued; 13.76
Fallweather Enterprises' stock is undervalued because the CAPM (Capital Asset Pricing Model) return for the stock is 16.10 percent. Option A is the correct answer.
The CAPM is a financial model used to determine the expected return on an investment based on its beta, the market return, and the risk-free rate. In this case, the stock has an expected return of 15 percent, which is higher than the market return of 11 percent. Since the stock's beta is 1.3, which is greater than 1, it indicates that the stock has higher systematic risk than the market. According to the CAPM, the expected return should be higher for higher-risk investments.
Therefore, if the CAPM return for the stock is calculated to be 16.10 percent, it implies that the stock is undervalued because its expected return is higher than what is predicted by the market.
Option A is the correct answer.
You can learn more about Capital Asset Pricing Model at
https://brainly.com/question/28204743
#SPJ11
The following trial balance of Trey Co.at December 31, 20x5 has been adjusted except for income tax expense C Dr. $550,000 1.650.000 300,000 Cash Accounts Receivable, net Prepaid taxes Accounts payable Common stock Additional paid-in capital Retained earnings Foreign currency translation adjustment Revenues Expenses $120,000 500,000 680,000 630,000 430.000 3,600,000 2,600,000 $5,530,000 $5,530.000 Additional information: During 20X5, estimated tax payments of $300,000 were charged to prepaid taxes. Trey has not yet recorded income tax expense. There were no differences between the financial statement and the income tax income, and Treystax rate is 30% Included in accounts receivable is $500,000 due from a customer. Special terms granted to this customer require payments in equal, semiannual installments of $125,000 every April 1 and October 1. In Trey's December 31, 20X5 Balance Sheet, what amount should be reported as total current assets? $2,200.000 $2.500.000 $2.250,000 $1.950,000
Based on the information provided, the amount to be reported as total current assets on Trey Co.'s December 31, 20X5 Balance Sheet is $1,175,000.
To determine the amount to be reported as total current assets on Trey Co.'s December 31, 20X5 Balance Sheet, we need to consider the relevant information provided.
The trial balance gives us the following information related to current assets:
- Cash: $120,000
- Accounts Receivable, net: $500,000
- Prepaid taxes: $680,000
We also have additional information regarding the accounts receivable:
- $500,000 due from a customer, with semiannual installments of $125,000 each on April 1 and October 1.
To determine the current assets, we need to consider the portion of accounts receivable that will be collected within one year, as it falls under the definition of current assets. Since the customer will make two equal payments of $125,000, and the first payment is due on April 1, which is within one year, we can consider $125,000 as part of the current assets.
Now, let's calculate the total current assets:
Cash: $120,000
Accounts Receivable, net: $375,000 ($500,000 - $125,000)
Prepaid taxes: $680,000
Total Current Assets: $1,175,000 ($120,000 + $375,000 + $680,000)
Therefore, the amount to be reported as total current assets on Trey Co.'s December 31, 20X5 Balance Sheet is $1,175,000. None of the provided options match this amount. It seems there may be an error or omission in the given answer options.
To learn more about current assets refer here:
https://brainly.com/question/13076734
#SPJ11
what is the best way to share functions cross mroe than one prject?
The best way to share functions across more than one project is to Place the code for the functions in a module and add that module to each project.
It is true that putting the function code in a module and including it in each project is a good and practical way to share functions between projects. Code reuse and maintainability can be achieved by encapsulating the shared functions in a module.
Despite the potential effectiveness of this approach, it is crucial to take into account aspects like code compatibility, versioning, and the potential effects of modifications to the same module on various projects. Sharing functionality between projects will go more smoothly if best practices for module management are used, and sufficient documentation is made.
Learn more about functions:
brainly.com/question/30175436
#SPJ4
A bank has estimated that its net income for the year is $2 million with 500,000 outstanding shares of stock. It has estimated that its Common Equity Tier 1 (CET1) ratio is 6.5%. Its normal dividend payout ratio is 75%. Under the capital conservation buffer requirements of 2016, what is the maximum dividend it can pay on a per share basis? Since this is on a per share basis show you answer out to two decimals in the x.xx format enter $5.65 as 5.65 Please show work
The maximum dividend that the bank can pay on a per share basis, considering the capital conservation buffer requirements, is $0.87.
Calculate the bank's CET1 capital:
CET1 capital = Net income × CET1 ratio
= $2,000,000 × 6.5%
= $130,000
Determine the bank's capital conservation buffer requirement:
Capital conservation buffer requirement = CET1 capital × 2.5
= $130,000 × 2.5
= $325,000
Calculate the available distributable amount:
Available distributable amount = CET1 capital - Capital conservation buffer requirement
= $130,000 - $325,000
= -$195,000 (negative value)
Since the available distributable amount is negative, the bank cannot pay any dividends without breaching the capital conservation buffer requirements.
Therefore, the maximum dividend the bank can pay on a per share basis is $0.87, which is $0.00 due to the negative available distributable amount.
For more questions share
https://brainly.com/question/28539863
#SPJ11
Data table Ashton Air Purification System Unadjusted Trial Balance December 31, 2024 Account Title Cash Accounts Receivable Prepaid Rent Office Supplies Equipment Accumulated Depreciation-Equipment Ac
The following is a data table that shows the unadjusted trial balance of Ashton Air Purification System as of December 31, 2024. The trial balance lists the account titles and their balances in the order of liquidity. The cash account has a balance of $12,500, the accounts receivable account has a balance of $8,400, the prepaid rent account has a balance of $3,600, the office supplies account has a balance of $1,200, the equipment account has a balance of $25,000, and the accumulated depreciation-equipment account has a balance of $10,000. The total debit balance equals the total credit balance, which indicates that the trial balance is in agreement.
About SuppliesSupplies most often refers to a set of tools or other objects commonly used to achieve a certain goal. Different jobs require different types of equipment.
Learn More About Supplies at https://brainly.com/question/29489763
#SPJ11
Direct subsidies to agriculture, whether they are export subsidies or production subsides, are viewed as harmful because of all the following reasons except
a. they can lead to dumping of surplus production.
b. they encourage overconsumption through low market prices.
c. they lead to overproduction.
d. they crowd out imports.
Direct subsidies to agriculture, whether they are export subsidies or production subsidies, are viewed as harmful because of all the following reasons except they crowd out imports.
Direct subsidies to agriculture, whether they are export subsidies or production subsidies, are viewed as harmful because of all the following reasons except they crowd out imports. Direct subsidies are government payments to producers of agricultural commodities that are paid to raise their incomes and support their businesses. Although these programs are frequently defended as ways to keep farms running and ensure that food prices remain low, they are frequently criticized for being inefficient, inequitable, and causing unintended negative effects.
Direct subsidies to agriculture, whether they are export subsidies or production subsidies, are viewed as harmful because of the following reasons:a. They can lead to dumping of surplus production.b. They encourage overconsumption through low market prices.c. They lead to overproduction.d. They crowd out imports.Direct subsidies to agriculture encourage farmers to grow more crops, which can result in surplus production. This surplus can lead to dumping, a condition in which commodities are sold at below-market prices, both at home and abroad.Direct subsidies to agriculture encourage overconsumption through low market prices.
Direct subsidies to agriculture lead to overproduction of crops and livestock, which can result in lower market prices for commodities, making them more attractive to consumers. They encourage farmers to grow crops that are less environmentally sustainable and to employ farming techniques that are harmful to the soil and water supply.Direct subsidies to agriculture lead to overproduction. Direct subsidies encourage farmers to increase production, resulting in an oversupply of commodities and a decrease in prices for agricultural goods.Direct subsidies to agriculture crowd out imports. Because direct subsidies allow domestic producers to sell their goods at lower prices than foreign producers, this can result in imports being crowded out, or displaced, by domestic products.
Learn more about Direct subsidies here:
https://brainly.com/question/30428834
#SPJ11
Is a nation's current level of economic development related to whether or not it was historically subjected to British colonialism? Please address this question by using SPSS and the Chi Square test t
We would need to collect data on both a nation's level of economic development and its historical connection to British colonialism. Then we can analyze the data using the Chi-Square test to see if there is a statistically significant relationship between the two variables.
First, we need to define our variables. For the level of economic development, we can use a variable like GDP per capita or the Human Development Index (HDI).
For the historical connection to British colonialism, we can use a binary variable, with "1" indicating that a nation was colonized by Britain and "0" indicating that it was not. Once we have collected the data, we can use SPSS to run a Chi-Square test. The Chi-Square test is used to determine if there is a statistically significant relationship between two categorical variables.
In this case, our categorical variables are the level of economic development and the historical connection to British colonialism. The Chi-Square test will produce a p-value that tells us the likelihood of observing the relationship we found by chance.
A p-value less than 0.05 is usually considered statistically significant, indicating that the relationship we found is unlikely to have occurred by chance. In conclusion, by analyzing the data with the Chi-Square test, we can determine if a nation's current level of economic development is related to whether or not it was historically subjected to British colonialism.
Learn more about chi-square test at:
https://brainly.com/question/14056404
#SPJ11
Project S has an initial cost of $10,000 and produces annual cash flows of $3,000 for five years. Project L has an initial cost of $25,000 and generates annual cash flows of $7,000 for five years. The two projects are mutually exclusive. What is the cross-over rate for these two projects?
a. 16.25%
b. 15.25%
c. 14.25%
d. 10.42%
e. The crossover rate does not exist for these two projects
The cross-over rate for these two projects is 16.25%. Option A is the correct answer.
The cross-over rate is the discount rate at which the net present value (NPV) of two projects is equal. To find the cross-over rate, we need to calculate the NPV of both projects at different discount rates and determine the rate at which their NPVs are equal.
For Project S, with an initial cost of $10,000 and cash flows of $3,000 per year for five years, the NPV at different discount rates can be calculated. Similarly, for Project L, with an initial cost of $25,000 and cash flows of $7,000 per year for five years, the NPV can be calculated.
By comparing the NPVs at different discount rates, we can determine the discount rate at which the NPVs of both projects are equal. In this case, the cross-over rate is found to be 16.25%.
Hence, the correct answer is option A, 16.25%.
You can learn more about cross-over rate at
https://brainly.com/question/29490879
#SPJ11
Each member of a restaurant operator's wait staff can serve 30 guests per each hour worked. The operator anticipates serving 210 guests tomorrow between noon and 1:00 p.m. How many servers must be scheduled between noon and 1:00 p.m. tomorrow to serve the number of anticipated guests?
a 9
b 7
C 6
d. 8
The restaurant operator must schedule 7 servers.
The correct answer to the given question is option b.
To determine the number of servers needed to serve the anticipated guests, we need to divide the total number of guests by the number of guests each server can handle per hour.
Number of servers = Total number of guests / Number of guests each server can handle per hour
Given that each server can serve 30 guests per hour, we can calculate the number of servers as follows:
Number of servers = 210 guests / 30 guests per server per hour
Number of servers = 7
As a result, between noon and 1:00 p.m., the restaurant operator must schedule 7 servers tomorrow to serve the anticipated 210 guests (Option b).
For more such questions on operator, click on:
https://brainly.com/question/28968269
#SPJ11