Answer:
Sterilization is a common medical practice It decreased bacterial bloom and coverage Hence it reduced rate of infectionIn water, sound travels 1500 m/s. A whale sings at a frequency of 17 Hz. What will be the length of the sound wave?
Answer:
A 20 Hz sound wave is 75 m long in the water (1500/20 = 75) whereas a 20 Hz sound wave in air is only 17 m long (340/20 = 17) in air. As we descend below the surface of the sea, the speed of sound decreases with decreasing temperature.
Four velcro-lined air-hockey disks collide with each other in a perfectly
inelastic collision. The first disk has a mass of 50.0 g and a velocity of
0.80 m/s to the west, the second disk has a mass of 60.0 g and a velocity of
2.50 m/s to the north, the third disk has a mass of 100.0 g and a velocity of
0.20 m/s to the east, and the fourth disk has a mass of 40.0 g and a
velocity of 0.50 m/s to the south. What is the final velocity of the disks
after the collision?
Answer:
The magnitude of the final velocity is approximately 0.526 m/s in approximately the direction of 8.746° East of South
Explanation:
The given collision parameters are;
The kind of collision experienced by the four velcro-lined air-hockey disk = Inelastic collision
The mass of the first disk, m₁ = 50.0 g
The velocity of the first disk, v₁ = 0.80 m/s West = -0.8·i
The mass of the second disk, m₂ = 60.0 g
The velocity of the second disk, v₂ = 2.50 m/s North = 2.5·j
The mass of the third disk, m₃ = 100.0 g
The velocity of the third disk, v₃ = 0.20 m/s East = 0.20·i
The mass of the fourth disk, m₄ = 40.0 g
The velocity of the fourth disk, v₄ = 0.50 m/s South = -0.50·j
Therefore, the total initial momentum of the four velcro-lined air-hockey disk, [tex]\Sigma P_{initial}[/tex] is given as follows;
[tex]\Sigma P_{initial}[/tex] = m₁·v₁ + m₂·v₂ + m₃·v₃ + m₄·v₄ = 50.0×(-0.80·i) + 60.0×(2.50·j) + 100 × (0.20·i) + 40.0 × (-0.50·j)
∴ [tex]\Sigma P_{initial}[/tex] = -40·i + 150·j + 20·i - 20·j = -20·i + 130·j
∴ [tex]\Sigma P_{initial}[/tex] = -20·i + 130·j
By the law of conservation of linear momentum, we have;
[tex]\Sigma P_{initial} = \Sigma P _{final}[/tex] = -20·i + 130·j
Therefore, given that the collision is perfectly inelastic, the disks move as one after the collision and the four masses are added to form one mass, "m", m = m₁ + m₂ + m₃ + m₄ = 50.0 + 60.0 + 100.0 + 40.0 = 250.0
∴ m = 250.0 g
Let, "v" represent the final velocity of the four disks moving as one after the collision
We have;
[tex]\Sigma P _{final}[/tex] = m × v = 250.0 × v = -20·i + 130·j
∴ v = -20·i/250 + 130·j/250 = -0.08·i + 0.52·j
The final velocity of the four disks after collision, v = -0.08·i + 0.52·j
The magnitude of the final velocity, [tex]\left | v \right |[/tex] = √((-0.08)² + (0.52)²) ≈ 0.526
[tex]\left | v \right |[/tex] ≈ 0.526 m/s
The direction of the final velocity, θ = arctan(0.52/(-0.08)) ≈ -81.254°
The direction of the final velocity, θ ≈ -81.254° which is 8.746° East of South
800 joules of work were done with a force of 200 newtons. Over what
distance was the force applied?
20 m
40 m
4 m
2 m
Answer:
4m
Explanation:
800/200
How would I solve this? It's Newton's 2nd law
Answer:
5.65 m/s²
Explanation:
We'll begin by calculating the mass of PJ when in San Diego (i.e Earth). This can be obtained as follow:
Weight of PJ on Earth (Wₑ) = 545 N
Acceleration due to gravity (g) on Earth (gₑ) = 10 m/s²
Mass of PJ on Earth (mₑ) =.?
Wₑ = mₑ × gₑ
545 = mₑ × 10
Divide both side by 10
mₑ = 545 / 10
mₑ = 54.5 Kg
Thus, the mass of PJ on San Diego (i.e Earth) is 54.5 Kg
Finally, we shall determine the acceleration due to gravity of planet Koja. This can be obtained as follow:
Weight of PJ on Koja (Wₖ) = 308 N
Mass of PJ on Koja (mₖ) = mass of PJ on Earth (mₑ) because mass is constant irrespective of location.
Mass of PJ on Earth (mₑ) = 54.5 Kg
Mass of PJ on Koja (mₖ) = 54.5 Kg
Acceleration due to gravity of on Koja (gₖ) =?
Wₖ = mₖ × gₖ
308 = 54.5 × gₖ
Divide both side by 54.5
gₖ = 308 / 54.5
gₖ = 5.65 m/s²
Thus, the acceleration due to gravity on planet Koja is 5.65 m/s²
If the boy travelled 2 meters to the right and 4 meters to the left what is the total distance that he travelled?
4 m
-4 m
6 m
2 m
Answer:
6m
Explanation:
2+4=6
How are CD's recorded?
Using digital technology
using analog technology
Answer:
its digital technology
Putting the ball back into play by the offense is called a ____ ____
Answer:
Hand ball ?
Explanation:
The middle one please need done in 45min
Answer:
600 J
Explanation:
it's obviously btw so yeahhhh
Hi!! Does anyone know the answer!! :D
Answer:
C. Contour Farming
what is a recovery heart rate?
Answer:Recovery heart rate is simply your pulse rate after exercise. Some fitness specialists refer to it as the post-exercise heart rate. The pulse number is used for different reasons in different settings.
Explanation:
Answer:
Heart rate is the speed of the heartbeat measured by the number of contractions of the heart per minute.
Explanation:
what 5+1234567890987654345632675432
can someone please help me it’s 15 points of my major grade..
a.
b.
c.
e.
f.
g.
character limit thing
320 joules of work were done by a force of 80 newtons. Over what
distance was the force applied?
44m
80m
4m
40m
Answer:
[tex]4\:\mathrm{m}[/tex]
Explanation:
The formula for work is given as [tex]W=F\Delta x[/tex] where [tex]F[/tex] is force applied and [tex]\Delta x[/tex] is displacement.
Rearranging this equation, we have:
[tex]\Delta x=\frac{W}{F}[/tex].
Plugging in given values, we get:
[tex]\Delta x=\frac{W}{F}=\frac{320}{80}=\fbox{$4\:\mathrm{m}$}[/tex].
Answer:
The answer is 4m
Explanation:
hope this helps!
Who was the most famous member of the Underground Railroad?
Answer:
Harriet Tubman
Explanation:
Answer:
Harriet Tubman
Explanation:
She was an abolitionist and fought for women's rights.
Harriet was also the first woman to lead a combat assault.
What does an electromaget do
Answer:
An electromagnet is a magnet that runs on electricity. Unlike a permanent magnet, the strength of an electromagnet can easily be changed by changing the amount of electric current that flows through it. The poles of an electromagnet can even be reversed by reversing the flow of electricity.
Question 1 of 10
Which option is a potential environmental benefit of adopting a new
technology?
A. Expanded customer base
B. Improved product quality
C. Higher numbers of sales
D. Reduced emission of pollutants
SUBMIT
Answer:
Its obviously number D
Explanation:
When it comes to environmental benefit, Reducing emission of pollutants does the best job.
Reduced emission of pollutants is a potential environmental benefit of adopting a new technology.
What are pollutants?The elements, molecules, and particles that contribute to pollution are known as pollutants; life can be injured by exposure to these substances, and their impacts on people and plants are widely documented.
There are several ways that pollutants can enter the environment, both naturally and through human activity.
Depending on the type of pollution, what happens to it once it is released into the air, soil, or water supply.
Therefore, Reduced emission of pollutants is a potential environmental benefit of adopting a new technology.
To learn more about pollutants, refer to the link:
https://brainly.com/question/28519286
#SPJ2
5
Select the correct answer.
Which statement best explains the relationship between electric force and the charges on two interacting objects?
СА.
Electrical force is directly proportional to the product of the charges on the two objects.
B.
Electrical force is inversely proportional to the product of the charges on the two objects.
Electrical force is inversely proportional to the product of the squares of the charges on the two objects.
D. Electrical force is directly proportional to the product of the squares of the charges on the two objects.
Answer:
Electrical force is directly proportional to the product of the charges on the two objects.
Explanation:
The electric force between two charges is given by :
[tex]F=\dfrac{kq_1q_2}{d^2}[/tex]
Where
k is electrostatic constant
q₁ and q₂ are charges
d is the distance between charges
It can be very clear that the electric force is directly proportional to the product of charges and inversely proportional to the square of the distance between them.
Hence, the correct option is (a) "Electrical force is directly proportional to the product of the charges on the two objects".
1. What happens to the orbit of the planet if the mass of the sun changes?
Answer:
If the sun's mass were to double without pushing or pulling on the Earth, then the Earth's orbit will change to an ellipse which brings it out to our current radius but spends most of its time closer to the sun. The tides would probably get even stronger then, particularly when our orbit takes us closer to the sun.
Explanation:
I WANT TO PLAY UNDERTALE PLS HELP 100 PTS SINENCE
Answer:
Use IGG Games or get money.
Explanation:
Answer:
Go to Undertale.com and buy it
Explanation:
sorry i don't really know how to answer this
Polar dissolves
A. nonpolar
B. polar
C. all molecules
D. none of the above
Polar substances are likely to dissolve in polar solvents.
Your answer is B.
Gamma radiation is composed of neutrons and protons.
A. True
B. False
Answer:
false
Explanation:
Answer:
The answer is B false
Explanation:
Gamma radiation is not composed of both neutrons and protons.
What led astronomers to believe in the existence of dark matter?
A. the fact that space is black
B. the big bang theory
C. the apparent effects of the gravity of unseen matter on visible objects
D. the existence of black holes
When the Sun is directly overhead, a
hawk dives toward the ground at a speed of
3.31 m/s.
If the direction of his motion is at an angle
of 35° below the horizontal, calculate the
speed of his shadow along the ground.
Answer in units of m/s.
Answer:
2.71 m/s
Explanation:
Apply the formula for cosine of an angle where;
The hypotenuse is the speed the hawk dives towards the ground : 3.31 m/s
The angle of direction of motion from the horizontal is : 35°
Speed of the shadow along the ground will be, A ;
Cosine 35° = A / 3.31
A= 3.31 cosine 35°
A= 2.71 m/s
Metals are good conductors of heat because .
Answer:
They have the highest melting point so that mean that the temperature and the are a conductive to electricity.
Explanation:
what should be angle between force and displacement to get the maximum work
Answer: The angle between force and displacement should be θ = 90° for minimum work. The angle between force and displacement should be θ = 0° for maximum work.
If the magnification produced by a lens has a negative value, the image will be
A) virtual and inverted
B) virtual and erect
C) real and erect
D) real and inverted
Answer:
I think it's B, not quite sure tho.
How is Heat Transfer different from Thermal Energy Transfer
Answer:
ExplaHeat can travel from one place to another in three ways: Conduction, Convection and Radiation. ... Thermal energy is transferred from hot places to cold places by convection. Convection occurs when warmer areas of a liquid or gas rise to cooler areas in the liquid or gas.nation:
What is radiation? Explain in your own words.
Answer:
An energy source in which we use to power most powerplants and reactors.
Explanation:
I think this is physics?
A student wants to calculate the density of the two objects shown below:
A Metal Cube and a Small Statue.
Describe the methods that the student should use to calculate the densities of the two objects.
ASAP please this piece of work is already late XD
Answer:
Okay
Explanation:
First we should quickly remind ourselves of the equation for density:density= mass/ volumeTo calculate the density we need a method of measuring the mass of each object and another method for measuring the volume of each object. To measure the mass in both cases we can simply use a measuring balance. To measure the volume we will need to use 2 separate methods. For the cube we can simply measure the length, height and depth with a ruler, multiply our measurements and we obtain the volume. The statue is a little more tricky because it has an irregular shape so we can't use the ruler anymore. Instead we should use graduated tank/trough of water. First of all measure the amount of water in the tank before putting in the statue. Then submerge the statue in the water and take another measurement of the volume of water in the tank. The statue will displace the water in the tank giving a higher value. We finally subtract the initial volume from the final volume and we should obtain the volume of the statue.We now have all the measurements necessary to calculate the density of both objects!
Which image illustrates the bouncing of a light wave off of a surface?
A
B
с
D
A. A
B. B
C. C
Answer:
The answer is A good luck :P
Answer:
A
Explanation:
The light Bounces off because it is reflecting off glass or anything else