final speed will be 25.98 m/s Explanation Force applied by the engine on the car is We have to find final speed of the car after travelling 300 m , so displacement of car is given as so wor done by the engines on the car
Answer:
[tex]F=ma \\ 900 = 1200a \\ a = \frac{3}{4} m. {s}^{ - 2} \\ {v}^{2} = {u}^{2} +2 as \\ {v}^{2} = {(15)}^{2} + 2( \frac{3}{4} )(300) \\ = 675 \\ v = \sqrt{675} \: m. {s}^{ - 1} [/tex]
1. One light goes out, they all go out
correct answer:✅series
Voltage and current are directly related
wrong answers: no circuits and parallel
hint:More voltage from the battery pushes more current through.
resistance and current are directly related
wrong answers: all circuits and parallel
hint: If you have more resistance in a circuit, does the current go up? That's what would happen if they were directly related.
Voltage and resistance are unrelated
correct answer:✅all circuits
answer choices are series, parallel, all circuits, and no circuits
2.Which will make the electromagnet weaker?
correct answer:Unwrapping some of the coils.
3.Why do gases exert more pressure or increase their volume when the temperature is raised?
correct answer:At higher temperatures, the particles of a gas move faster. This increase in kinetic energy can increase the pressure and / or the volume of the gas.
hint: A few reminders of definitions from last semester:
Kinetic energy is the energy of motion.
Temperature is the average kinetic energy of the particles in a sample.
For a gas:
Temperature and pressure are directly related.
Temperature and volume are directly related.
Pressure and volume are inversely related.
4.Which group naturally achieves the octet rule without gaining or losing electrons?
correct answer:Noble gases
5.Label each as a physical or chemical property/change.
Shiny -✅physical
electrolyte -✅physical
highly reactive -✅chemical
In the presence of oxygen, will form carbon dioxide and water -✅chemical
maellable -✅physical
rusts -✅chemical
acid rain erodes statues and monuments -✅chemical
6.Which statement is true about the groups on the periodic table?
correct answer:The halogens have 7 valence electrons and form -1 ions.
7. Match the word to its definition.
the stuff that gets dissolved in a solution -✅solute
the stuff that does the dissolving in a solution -✅solvent
this determines the amplitude of a wave - ✅energy
the change in frequency of a wave as the object that is producing it moves towards or away from you -✅Doppler Effect
The material that a wave moves through-✅medium
Wave whose matter vibrates perpendicular to the direction the wave travels -✅ transverse
An atom of an element that has a specific number or neutrons, such as Carbon-14. -✅isotope
8.Check all true statements about the dog as it runs the obstacle course.
✅If the dog has the highest average speed, he will win the race.
✅A heavier dog will have a harder time changing direction on the course because it has more inertia than the small dog.
✅As the dog turns, his velocity changes as he changes direction.
( I got a 2.4 out of 4 on this questions, the other options were)
Whenever the dog speeds up, slows down, or changes direction, he is accelerating.
The dog's speed is constant throughout the race.
The weight of the dog will be the same if the competition was held on the moon.
If the doe can double his net force on an obstacle, his acceleration will be cut in half.
The mass of the dog will be the same if you take him to the international space station.
the wrong answer was❌The dog's velocity is constant throughout the race. because the speed and direction changed throughout, the velocity is not constant.
9.Match each atom with the correct element it represents. Make sure you are using your periodic table (Links to an external site.)
✅ Beryllium
✅ Lithium
✅ Helium
✅ Carbon
(image below is for question 9)
Explanation:
ndndndndnndndndndndndndnndndnd
Answer:
teysyshnk
Explanation:
Х
In which layer of
the soil do we
usually find
loam? to. Topsoil
b. Parent Soil c.
Bedrock d.
ground-soil
Answer:
A. topsoil the answer
Explanation:
I think its a correct answer
Help Me With This Question Please.
Thank you UwU
8Ω, 9Ω, xΩ are in series
[tex] \therefore \: R _{1} = 8 + 9 + x = (17 + x)Ω[/tex]
3Ω and 5Ω are in series
[tex] \therefore \: R _{2} = 3+ 5 = 8Ω[/tex]
Now equivalent resistance of R1 and R2 which are parallel in R3 = 6Ω
[See The Attachment]
[tex] \therefore \frac{1}{R _{3}} = \frac{1}{R _{1}} + \frac{1}{R _{2}} \\ \\ \therefore \: \frac{1}{6} = \frac{1}{(17 + x)} + \frac{1}{8} \\ \\ = \frac{1}{17 + x} = \frac{1}{6} - \frac{1}{8} = \frac{1}{24} \\ \\ \therefore17 + x = 24 \\ x = 24 - 17 = 7 \\ x = 7Ω[/tex]
Hope This Helps!!
The value of the resistance X is 7 ohms.
Equivalent resistance in seriesThe equivalent resistance in series is calculated as follows;
R₁ = 8 + 9 + x = 17 + x
R₂ = 3 + 5 = 8
Equivalent resistance in the circuitThe equivalent resistance in the circuit is calculated as follows;
[tex]\frac{1}{R} = \frac{1}{R_1}+ \frac{1}{R_2} \\\\R = \frac{R_1 R_2}{R_1 + R_2} \\\\[/tex]
[tex]R(R_1 + R_2 ) = R_1 R_2[/tex]
6(17 + x + 8) = 8(17 + x)
150 + 6x = 136 + 8x
14 = 2x
x = 7
Thus, the value of the resistance X is 7 ohms.
Learn more about series circuit here: https://brainly.com/question/19865219
Activity A:
Surviving a crash
Get the Gizmo ready
• Click Reset (?).
. On the DESIGN tab, check that Sedan is selected
Introduction: Modern vehicles contain features designed to keep passengers safe in a crash.
The crumple zone in the front of the car slows the car gradually and increases stopping time.
The safety cell is a rigid cage that prevents passengers from being crushed. Inside, seat belts
and airbags prevent the driver from hitting the windshield, steering wheel, or dashboard.
Question: How does a crumple zone help protect a passenger?
1
Make a hypothesis: On the DESIGN tab, look at the parameters you can control. What
settings do you think will make the safest car? Set up the Gizmo, and then fill in below.
Crumple zone length:
Crumple zone rigidity:
Safety cell rigidity:
Seat belt present?
If present, seat belt stiffness:
Air bag present?
If present, air bag rigidity:
The crumple zone help protect a passenger from injury by converting some of the kinetic energy possessed by the car into a controlled deformation, or crumpling when there is a crash.
What is impact?The term impact refers to a large force that acts for a short time. Passengers in a vehicles sustain injuries after an accident due to the high impact of the crash.
As such, the crumple zone help protect a passenger from injury by converting some of the kinetic energy possessed by the car into a controlled deformation, or crumpling when there is a crash.
Learn more about impact in physics: https://brainly.com/question/10952916
A ball is dropped from the top of a building.
When does the ball have the least potential energy?
O after it has hit the ground
O half way through the fall
O as it is released
O just before it hits the ground
Answer:
after it has hit the ground
.........
Answer: A. after it has hit the ground
what is an example of friction on an object in motion?
Answer:
Friction drag force causes objects to slow down as they move through a fluid, such as air or water. ... As an object's speed increases, the drag force from the fluid increases exponentially. • For example, when you drive at high speeds, the frictional force of air on the car increases, and fuel economy decreases.
If you are driving 80 km/h along a straight road and you look to the side for 2.1 s , how far do you travel during this inattentive period?
A pump lifts water into an overhead tank at a height of 12m at a rate of 5kg/s,what is the power in the pump?
Answer:
600 watts
Explanation:
A baseball with mass of 0.145 kg is thrown straight down at the ground. At a particular speed, it has a drag force of 0.4 N acting on it. What is its acceleration at that time?
Answer Choices:
−2.8 m/s2
−9.8 m/s2
−12.6 m/s2
−7.0 m/s2
Answer:
It is -7.0 m/s2
Explanation:
Just did it
A baseball of mass 0.145 kg is thrown with the force of 0.4 N then the acceleration of the baseball will be equal to 2.8 m/s².
What is acceleration?The rate of change in an object's velocity concerning time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.
Since acceleration has both a magnitude and a direction, it is a vector quantity. Velocity is a vector quantity as well. The definition of acceleration is the change in velocity vector over a time interval divided by the time interval.
As per the instructions given in the question,
Force, f = 0.4 N
Mass, m = 0.145 kg
F = ma
a = f/m
a = 0.4/0.145
a = 2.8 m/s².
To know more about Acceleration:
https://brainly.com/question/12550364
#SPJ2
2. How are the speed, wavelength, and frequency of a wave related
Answer:
speed = wavelength * frequency
Explanation:
speed = wavelength * frequency
Brainliest if correct Question 7 of 10
Which two options are forms of potential energy?
A. Nuclear energy
B. Electrical energy
C. Thermal energy
D. Sound energy
E. Chemical energy
Answer:
Electrical energy and Chemical energy
Explanation:
Good luck on the quiz dawg, I'm doing the same one LOL
a computer printer has a width of 18in. What is it’s width
Answer:
0.46 m. hope this helps.
Answer:
0.46 Meters
Explanation:
How many feet up high should I be required to wear a harness?
Answer:
About 6 feet or higher is recommended.
Explanation
Do you think protection of one species can protect its community? Why?
Answer:
I think that protection of one species can not protect its community.
Explanation:
The advantage of protecting entire ecosystems is the most effective way to save species because species confined to a small area could be wiped out by a single natural disaster. Some species require a large range to find adequate food or mate. Therefore, protecting the habitats of endangered and threatened species often means preserving or managing large areas (entire ecosystem).
24. An elevator is moving vertically up with an acceleration a. The force exerted on the floor by a passenger of mass m is
(a) mg (b) ma (c) mg - ma (e) none of these (d) mg + ma
Given :-
An elevator is moving vertically up with an acceleration a.To Find :-
The force exerted on the floor by a passenger of mass m .Solution :-
As the man is in a accelerated frame that is non inertial frame , we would have to think of a pseudo force .
The direction of this force is opposite to the direction of acceleration the frame and its magnitude is equal to the product of mass of the concerned body with the acceleration of the frame .For the FBD refer to the attachment . From that ,
[tex] \implies Weight_{apparent}= mg + ma [/tex]
Hence option d is correct choice .
I hope this helps .
Another elephant pushes with 3500 N on a load of trees. It then pushes these trees for 225 m. How much work did he elephant do?
Answer:
787, 500 N/m
Explanation:
Work = Force • displacement
[tex]Work = (3500 N)(225 m) = 787500\frac{N}{m}[/tex]
[tex]W = (3500 N)(225 m) = 787500\frac{N}{m}[/tex]
how do i explain why two balls have the same velocity if they are rolling down the same slope but they started in different positions?
Answer:
When two balls are equally weighted, no matter where they are placed on a ramp, they will travel at the same speed. One will just reach the ground quicker.
Explanation:
Question 14 (1 point)
One star has a temperature of 20,000 K and another star has a temperature of 8,000
K. Compared to the cooler star, how much more energy per second (how many times
more energy) will the hotter star radiate from each square meter of its surface?
We have that the more energy per second to radiated by the hotter is mathematically given as
Energy per second=256
Energy per second to radiated
Question Parameters:
One star has a temperature of 20,000 K
and another star has a temperature of 8,000
Generally the equation for the Energy per second is mathematically given as
Energy per second is Proportional to T^4
Where
T=20000/8000
T=4
therefore
Energy per second=4^4
Energy per second=256
For more information on Energy visit
https://brainly.com/question/13439286
A 288-gram cart starts from rest and rolls down an inclined plane from a height of 1.226 m. Determine its speed (in m/s) at a height of 0.126 m above the bottom of the incline. Assume friction is negligible
The law of conservation energy
PE₁ + KE₁ = PE₂ + KE₂
From rest ⇒ v₁ = 0 ⇒ KE₁ = 0
Input the value:
PE₁ = PE₂ + KE₂
[tex]\tt mgh_1=mgh_2+\dfrac{1}{2}mv_2^2\rightarrow divide\:m\\\\gh_1=gh_2+\dfrac{1}{2}v_2^2\\\\9.8(1.226-0.126)=\dfrac{1}{2}v_2^2\\\\v_2=4.64\:m/s[/tex]
- At time t = 0, a small ball is projected vertically upwards from a point A which is 24.5 m above the ground. The ball first comes to instantaneous rest at the point B, where AB = 19.6 m and first hits the ground at time t = T seconds. = The ball is modelled as a particle moving freely under gravity. (a) Find the value of T.
The value of time needed to complete the upward and the downward motion is, T=5sec .T is the time at which the ball first hits the ground.
What is the time period?The time period is found as the ratio of the displacement and the velocity. Its unit is second and denoted by t
The given data in the problem is;
The time required to move upwards is,t₁
The time required to move downwards is,t₂
The distance traveled is,s= 19.6m
The gravitational acceleration is, g=9.81 m/s
At the highest position, the velocity of the ball is zero;
The time required to move upwards is found as;
[tex]\rm S_1 = ut + \frac{1}{2} at^2 \\\\ \rm S_1 = \frac{1}{2} (-g)t_1^2 \\\\ t_1= \sqrt{\frac{2S_1}{g} } \\\\ t_1= \sqrt{\frac{2 \times 19.6 }{9.81} } \\\\ t_1= 2 \ sec[/tex]
The time required to move downward is found as;
[tex]\rm S_2 = ut + \frac{1}{2} at_2^2 \\\\ \rm S_1 = \frac{1}{2} (-g)t_2^2 \\\\ t_2= \sqrt{\frac{2S_2}{g} } \\\\ t_2= \sqrt{\frac{2 \times 44.1 }{9.81} } \\\\ t_2= 3 \ sec[/tex]
The total time period is the sum of the time required to move upwards and the time required to move downwards.
T =t₁+t₂
T=2+3
T=5 sec
Hence the value of T will be 5 sec.
To learn more about the time period refer to the link;
https://brainly.com/question/569003
What happens to an object’s momentum if its mass is reduced by half but its velocity remains the same?
If the mass of an object is halved and its velocity remains the same, its momentum will be halved.
What is momentum?Momentum is the quantity of motion of a moving body, measured as a product of its mass and velocity.
We can calculate the momentum of an object using the following expression.
p = m × v
where,
p is the momentum.m is the mass.v is the velocity.The initial momentum of the object is:
p₁ = m₁ × v₁
If its mass is reduced by half but its velocity remains the same, the new momentum is:
p₂ = m₂ × v₁ = 0.5 m₁ × v₁ = 0.5 p₁
If the mass of an object is halved and its velocity remains the same, its momentum will be halved.
Learn more about momentum here: https://brainly.com/question/7538238
Electric wires in between the poles are seen stretched in winter. Give Reason?
Electric wires/cables expand when temperature rises l
A cannonball is shot (from ground level) with an initial horizontal velocity of 20 m/s and an initial vertical velocity of 30 m/s. What's the maximum height reached by the cannonball
Answer:
maximum height = 46m
Explanation:
Vx = 20m/s
Vy = 30 m/s
gravity = 9.8 m/s/s
final velocity = initial velocity - gravity • time
0 = 30m/s - 9.8m/s/s • time
subtract 30m/s from both sides
-30m/s = - 9.8m/s/s • time
divide both sides by -9.8m/s/s
3.06 s = time
height = initial velocity • time - 1/2 • gravity • time^2
height = 30m/s • 3.06s - 1/2 • 9.8m/s/s • 3.06s ^2
height = 46m
the maximum height is equal to 46m
if i release one steel ball from the top of a ramp and the other ball from the 40cm mark will they have the same acceleration?
Answer:
Yes, they will also have the same acceleration. Acceleration is controlled by the amount of weight (def. amount of gravitational pull on a given object) that the ball has. For one ball to accelerate quicker than the other, it would need a propulsion element, which it does not.
Explanation:
As a boy pulls a sled carrying his sister, he exerts a force of 2.6 lbs.at an angle of 30 degrees with the ground. How much work does he do if he pulls her at a constant speed for exactly one-half mile (2640 ft)?
The amount of work done by the boy in pulling the sled is 8064.41 J
Definition of work doneWorkdone is defined as the product of force and distance moved in the direction of the force. It can be expressed mathematically as:
Workdone (Wd) = force (F) × distance (d)
Wd = Fd
Considering angle projection,
Wd = FdCosθ
How to determine the workdone Force (F) = 2.6 lb = 2.6 × 4.448 = 11.5648 NDistance (d) = 2640 ft = 2640 × 0.305 = 805.2 mAngle (θ) = 30°Workdone (Wd) =?Wd = FdCosθ
Wd = 11.5648 × 805.2 × Cos 30
Wd = 8064.41 J
Learn more about workdone:
https://brainly.com/question/14667371
A granite block is at rest on a horizontal surface in a vacuum chamber. The granite block is 3 cm tall, and the length and width are both 20 cm. The density of granite is 2.75 g/cm^3. What pressure does the block exert on the surface?
Answer:
M = V ρ = .03 * .2*2 cm^3 * 2.75 g / cm^3 = .0033 kg weight
W = m g = .0033 kg * 9.80 m / s^2 = .032 N
P = F / A = W / A = .032 N / .2^2 m^2 = .80 N/m^2 = .80 Pascal
Identify the region of the electromagnetic spectrum where the wavelength measurement of 7.5 nm can be found.
We have that the electromagnetic spectrum where the wavelength measurement is 7.5 nm is the X-ray
X-ray
Option D
Question Parameters:
the wavelength measurement of 7.5 nm can be found
Generally, gamma rays has its wavelength around 10pm.
The microwaves has its wavelength around 1cm.
The ultraviolet has its wavelength around the 400nm.
The range of the X-rays is between to 5nm to 10nm.
Hence,the electromagnetic spectrum where the wavelength measurement is 7.5 nm is the X-ray
X-ray
Option D
For more information on Wave
https://brainly.com/question/3004869
CQ
Identify the region of the electromagnetic spectrum where the wavelength measurement of 7.5 nm can be found.
A) Gamma rays
B) Microwaves
C) Ultraviolet
D) X-rays
E) Visible light
Ben and Dan both weigh 600 N. They are doing pull-ups together. Each pull-up is 0.5 meters of distance. How much work do they each do for every pull-up? 300 J 600 J 1200 J 1500 J
Answer:
300 J
Explanation:
Work = (Force)*(distance) = 600 N ∗ 0.5 m = 300 J
A 5 kg block is placed near the top of a frictionless ramp, which makes an angle of 30o degrees to the horizontal. A distance d = 1.3 m away from the block is an unstretched spring with k = 3 × 103 N/m. The block slides down the ramp and compresses the spring.
Required:
Find the maximum compression of the spring.
The maximum compression of the spring is 0.146 m.
Work Energy theorem
The work done by the block when it slides down the ramp will be converted to elastic potential energy of the spring.
W = U
Fd = U
where;
F is the horizontal component of the block weightmgsin(θ) x d = ¹/₂kA²
[tex]A^2 = \frac{2mg sin(\theta)d}{k} \\\\A = \sqrt{\frac{2mg sin(\theta)d}{k}} \\\\A = \sqrt{\frac{2(5 \times 9.8) sin(30)\times 1.3}{3\times 10^3}}\\\\A = 0.146 \ m[/tex]
Thus, the maximum compression of the spring is 0.146 m.
Learn more about work energy theorem here: https://brainly.com/question/22236101
2. An object’s velocity is measured to be v (t) = αt−βt2, where α = 4.00 m/s2 and β = 2.00 m/s3. Calculate the average acceleration of the object from t = 0.0 s to t = 3.0 s
Hi there!
Given the values for α and β, we can plug these into the given equation:
[tex]v(t) = 4t - 2t^2[/tex]
Begin by solving for the velocity at t = 0 and t = 3:
At t = 0:
[tex]v(0) = 4(0) - 2(0^2) = 0 \frac{m}{s}[/tex]
At t = 3:
[tex]v(3) = 4(3) - 2(3^2) = 12 - 18 = -6 \frac{m}{s}[/tex]
Acceleration is the SLOPE of the velocity graph (its derivative), so we can use the kinematic equation:
[tex]a = \frac{v_f - v_i}{\Delta t}[/tex]
Plug in the knowns:
[tex]a = \frac{-6-0}{3 - 0} = \boxed{-2 \frac{m}{s^2}}[/tex]