In measuring bond energy experimentally, some sources of error include;
error due to inaccurate measurements of quantities of reactantserror due to heat losseserror due to parallax in taking readings from the thermometernot all the bond energy is converted to heatWhat is bond energy?Bond energy is the energy that is require to form or break chemical bonds between atoms of reactants or products.
Bond energies can be measured experimentally using a bomb calorimeter.
The quantity of reactants are measured and the temperature changes are recorded.
This method is not accurate though as certain errors occur.
Some of the likely sources of errors include;
error due to inaccurate measurements of quantities of reactantserror due to heat lossesparallax error in taking readings from the thermometernot all the bond energy is converted to heatLearn more about bond energy at: https://brainly.com/question/16997325
what is marble formed from A. obsidian B. granite C. limestone
Answer:
I'm pretty sure its C. limestone.
What is the role of flagella?
Answer:
a motility organelle that enables movement and chemotaxis
Explanation:
pls mark brainlist
Will a piece of fruit left in the open air rot sooner in summer or in winter?
Another question. What is an example of a chemical change?
Answer:
Yellowing of leaves
Explanation:
Involves the colour change in leaves whereby less amount of chlorophyll is produced
Answer:
burning, cooking, milk becoming curd, rusting of iron
how fast is a motor cycle going that travels 6 miles in 4 minutes
Answer: 60 minutes per hour, sixty miles per hour, therefore, one mile per minute.
Explanation:
A clasping handshake may be used as an analogy for an enzyme-catalyzed reaction because it represents the specific manner in which an enzyme ________.
Answer:
binds to substrate
Explanation:
A green powder was placed into a beaker of water. After it was stirred the water looked cloudy and lumps of powder could still be seen. Has a solution been formed? Explain your answer?
Answer:
it make poisionus police come and took away
What mass of silver can be produced from 3.00 g of copper and 3.85 g of silver nitrate?
Answer:
Explanation:
Balanced Chemical Equation:
Cu + 2 AgNO₃ → Cu(NO₃)₂ + 2 Ag
Step 1: Find Limiting Reagent
Moles of Cu:
Mole = 3 g / 63.55 g/mol = 0.04721 mol
Moles of AgNO₃:
Moles = 3.85 g / 169.87 g/mol = 0.022664 mol
Also, Mole ratio of Cu : AgNO₃ is 1 : 2. Hence, 0.04721 mol of Cu will require 0.09442 mol of AgNO₃. This means, AgNO₃ is the limiting reagent.
Step 2: Calculate moles of Ag:
0.022664 mol of AgNO₃ will produce 0.022664 mol of Ag because both have same ratio in balanced chemical equation.
Step 3: Calculate mass of Ag:
Mass = 0.022664 mol × 107.87 g/mol = 2.4447 g
solve this questions please
Answer:
C. through concentrated sulphuric acid and then over heated copper
What adaptation’s do swallowtail possess?
Plz it’s urgent
4 items being divided equally among 3 people
The molar mass of bismuth (\ce{Bi}BiB, i) is \pu{208.98 g/mol}208.98 g/mol208, point, 98, space, g, slash, m, o, l.
Calculate the mass in grams of a sample of \ce{Bi}BiB, i containing \pu{7.35x10^23}7.35×10
23
7, point, 35, times, 10, start superscript, 23, end superscript atoms.
On a summer day early in the moming, a balloon is filled with helium when the temperature
is 21°C, but the temperature will reach a peak of 46°C later in the day. The balloon holds 12.8 L of helium gas at a starting pressure of 239 kPa. The balloon will burst when the internal pressure (Pb) reaches 256 kPa. Answer the following questions and show your
work
1. How many moles of helium gas are in the balloon?
2. What will the gas pressure be in the balloon at the peak temperature?
3. Will the balloons burst when the temperature reaches 42 degrees Celsius? Explain.
4. To what pressure should the helium gas pressure be reduced to avoid bursting the balloon? (Assume no significant volume change of the balloon)
Any help I’d great! Equations are not my strong suit
Based on the data provided;
number of moles of helium gas is 1.25 molespressure at peak temperature is 259.3 kPainternal pressure is above 256 kPa, therefore, the balloon will burst.pressure should be reduced to a value less than 256 kPa by reducing the temperatureWhat is the ideal has equation?The ideal gas equation relatesthe pressure, volume, moles and temperature of a gas.
The moles of helium gas is calculated using the Ideal gas equation:
PV = nRTn is the number of moles of gas
R is molar gas constant = 8.314 L⋅kPa/Kmol
P is pressure = 239 kPa
T is temperature = 21°C = 294 K
V is volume = 12.8 L
Therefore;
n = PV/RT
n = 239 × 12.8 / 8.314 × 294
n = 1.25 moles
The number of moles of helium gas is 1.25 moles
At peak temperature, T = 46°C = 319 K
Using P1/T1 = P2/T2
P2 = P1T2/T1
P2 = 239 × 319/294
P2 = 259.3 kPa
The pressure at peak temperature is 259.3 kPa
At 42°C, T = 315 K
Using P1/T1 = P2/T2
P2 = P1T2/T1
P2 = 239 × 315/294
P2 = 256.07 kPa
Since the internal pressure is above 256 kPa, the balloon will burst.
The pressure should be reduced to a value less than 256 kPa by reducing the temperature.
Learn more about gas ideal gas equation at: https://brainly.com/question/12873752
PLS HELP MEEEEEEEEEEEEEE WITH SCIENCEEEEEEEEEE
Answer:
I believe this is a measuring cylinder? and i think the volume is 35cm^3
Explanation:
hope this helps!
How many grams of Al2O3are present in 7.1 x 10^22 molecules of Al2O3?
Answer:
13.4g
Explanation:
we know that:
1 mole = 6.02 × 10²³ atoms
make the unknown number of moles = x
x = 7.1 × 10²² atoms
putting them both together:
1 mole = 6.02 × 10²³ atoms
x = 7.1 × 10²² atoms
Cross multiply:
6.02 × 10²³ x = 7.1 × 10²²
divide both sides by 6.02 × 10²³
[tex]x = \frac{7.1 \times 10²² }{ 6.02 × 10²³} [/tex]
[tex]x = \frac{71}{602} [/tex]
we now have the number of moles of Al₂CO₃
to calculate the grams (mass):
[tex]moles = \frac{mass}{relative \: formula \: mass} [/tex]
[tex]mass = moles \: \times \: relative \: formula \: mass[/tex]
add up all of the atomic masses of Al₂CO₃ to calculate relative formula mass:
(27 × 2) + 12 + (16 × 3) = 114
the grams (mass) of Al₂CO₃:
[tex] \frac{71}{602} \times 114 = 13.4g[/tex]
How many molecules of sodium nitrate are produced when 40 g of sodium azide, NaN3, react with oxygen?
a
3.7x10^23
b
9.2x10^22
c
1.85x10^23
d
6.02x10^23
Organisms that live in the water (ocean, rivers, intertidal zones) must be adapted for changing conditions. Describe at least one (1) adaptation that organisms living in an aquatic ecosystem might have and how it helps the organism to survive.
One adaptation that organisms living in an aquatic ecosystem might have is the ability to regulate their salt concentration.
What are organism?Organisms are living species that live on the planet earth.
There are types of organisms categorized by the environment they live.
Organism that can survive only in water is called an aquatic organism.
We have,
One adaptation that organisms living in an aquatic ecosystem might have is the ability to regulate their salt concentration.
Aquatic environments can have varying levels of salinity, and some organisms need to maintain a specific salt concentration in their bodies to survive.
For example, marine fish have kidneys that can produce very concentrated urine to prevent them from losing too much salt in their surroundings, while freshwater fish have specialized cells in their gills that actively pump salt out of their bodies to maintain the appropriate balance.
Similarly,
Some marine invertebrates, such as crabs and mussels, can regulate the amount of salt they take in by actively transporting ions across their gills or other specialized structures.
This adaptation helps the organism to maintain the proper fluid balance and avoid dehydration or over-hydration, which can be lethal.
Thus,
One adaptation that organisms living in an aquatic ecosystem might have is the ability to regulate their salt concentration.
Learn more about organisms here:
https://brainly.com/question/12825206
#SPJ5
Determine the number of moles of air present in 1. 35 L at 750 torr and 17. 0°C. Ideal Gas Law formula: PV = nRT(R = 62. 396 L•torr/mol•K) Which equation should you use? P equals StartFraction n R T over V EndFraction. N equals StartFraction R T over P V EndFraction. N equals StartFraction P V over R T EndFraction.
Answer:
Answer: PV/RT = n = N equals startfraction P V over R T endfraction Explanation:
Help!! Hurry!! I will mark brainliest if you get it correct. NO SPAM!!!!!!
Write the alpha decay equation for the following isotope:
211/84 PO
Answer:
216/84 Po + 4/2 He a
Explanation:
Answer:
Problem: Polonium-210, 210Po, decays to lead-206, 206Pb, by alpha emission according to the equation 21084Po → 20682Pb + 42He
Explanation:
A compound has a percent composition of 15.24% sodium (molar mass
= 22.99 g/mol), 52.95% bromine (molar mass = 79.90 g/mol), and 31.81%
oxygen (molar mass = 16.00 g/mol). Assuming that the mass of the com-
pound is 100 g, what is the compound's empirical formula?
Show all your work. Please use correct formatting for subscripts and exponents.
The math formula editor makes it easier to show work.
This problem is providing us with the percent composition of a compound containing sodium, bromine and oxygen. Thus, the empirical formula is required and found to be NaBrO₃.
Empirical formulasIn chemistry, empirical formulas are used in order to figure out the minimum whole-number representation of a molecular formula, which contains the actual number of atoms.
Thus, we start determining it by assuming the given percentages as masses and calculating the moles with the atomic mass of the involved elements:
[tex]n_{Na}=\frac{15.24}{22.99}=0.700 \\\\n_{Br}=\frac{52.95}{79.90} =0.663\\\\n_O=\frac{31.81}{16.00}=1.99[/tex]
Next, we divide by the 0.633 as the smallest number of moles in order to determine their subscripts in the chemical formula:
[tex]Na:\frac{0.700}{0.663}=1\\ \\Br:\frac{0.663}{0.663}=1\\ \\O=\frac{1.99}{0.663} =3[/tex]
Hence, the empirical formula turns out to be NaBrO₃.
Learn more about percent composition: brainly.com/question/12247957
Which statement best describes the movement of energy?.
Help me please i am so confused Find The Masses
Aluminum
Copper
Iron
Lead
explain why a mixture is used as the electrolyte??
Answer:
You need a mixture of positive and negative ions
Explanation:
A mixture is used as the electrolyte because a mixture of positive and negative ions are needed.
What is a Mixture?This consists of two or more chemical substances which aren't chemically bonded together.
Electrolyte on the other hand conducts electricity when dissolved with the help of the mixture of positive and negative ions.
Read more about Electrolyte here https://brainly.com/question/14654936
#SPJ2
Identify the solution that is likely to have the greatest concentration of H . Please choose the correct answer from the following choices, and then select the submit answer button. Answer choices orange juice ammonia pure water bleach blood
From what we know, we can confirm that the solution that is likely to have the greatest concentration of H+ is orange juice.
This has to do with the effects of H+ in a substance. The presence of hydrogen ions causes the substance to be more acidic, and the higher the concentration the higher the acidity of the substance. Since orange juice is the only acidic solution listed, we can know it will have the highest concentration of H+ ions.
Therefore, due to its acidic nature, we can confirm that the solution that is likely to have the greatest concentration of H+ is orange juice.
To learn more about acids visit:
https://brainly.com/question/1515003?referrer=searchResults
Dominique goes to the doctor for bone aches. The doctor tells him
that Vitamin D helps his body take in the Calcium for his bones.
Explain why the doctor tells Dominique to do more outdoor activities.
Answer:
sun gives you vitamin D
Explanation:
Our body creates vitamin D from direct sunlight on our skin when we're outdoors.
Which of the following equations represents a nuclear charge?
Select one:
a. A
b. B
c. C
d. D
Answer:
C
Explanation:
The reaction represents transmutation, which is a nuclear reaction where electrons are transferred.
What happens to the carbon dioxide that the alveoli receive from the blood?
Answer:
it is then exhaled
Explanation:
Carbon dioxide passes from the blood into the alveoli and is then exhaled.
An event happens that decreases the number of earthworms, spiders, and insects in an area. How would you expect the event to affect to the number of long-billed curlews in the same area? (1 point) O It would not be affected. O It would stay the same. 0 It would increase. It would decrease.
Long-billed curlews feed on insects and worms mainly. Thus, their population will drastically reduce if there is a decrease in their food availability.
Factors affecting the population of organismsOne of the factors that affect the population size of a species is food availability.
Inadequate food increases intraspecies competition and results in more deaths. This leads to a reduction in the population size.
Long-billed curlews are a species of bird that feeds on insects and worms when inland. If an event leads to a decrease in the number of earthworms, spiders, and insects in an area, this will greatly reduce the population of long-billed curlews.
More on factors affecting the population of organisms can be found here: https://brainly.com/question/6593205
10.
What are the products of a neutralization reaction?
an acid and a base
a salt and water
a salt and an acid
water and a base
Answer:
Salt and water
Explanation:
The reaction of an acid and a base forming a salt and water.
I need help please !!!
(01.05 MC)
Two changes are described below.
A. Ice melts to form water.
B. Sugar cubes dissolve in hot coffee.
Which statement is true about the two changes?
Answer:
A is it
Explanation:
How does mixing hydrogen peroxide and water test the reactivity of catalase?.
Hydrogen peroxide is not the chemical causing the reaction.
Chemical ReactionGenerally,Catalyses is an enzyme which breaks H2O2 into H2O and O2. there will be no reaction if we combine H2O with H2O2,
H2O2 receives dissolved in water except displaying any reaction. So they are used as bad manipulate in the test.
Therefore, it shows that hydrogen peroxide is not the chemical causing the reaction
For more information on Chemical Reaction
https://brainly.com/question/11231920