Please help. The question is in the picture

Answer:

0.013 mol/L

Explanation:

Molarity, which is molar concentration or moles per unit volume, can be calculated using the formula:

M = n/V

Where; M = Molar concentration of solution

n = number of moles of solute

V = Volume of solvent

n = 0.0025 moles of sugar

V = 200.00mL of solution

Since 0.001L = 1mL

200mL = 0.200L

Therefore, M = n/V

M = 0.0025/0.200

M = 0.0125 mol/L

Round up to the nearest thousandth ~ 0.013mol/L

Answer:

The answer is D - Atom

The smallest unit of an element that can exist either alone or in combination with other such particles of the same or different elements is the atom.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ2

Answer:

plucking is usually extracting hair

Explanation:

example: pluck the chicken feathers

pluck my brows

Answer:

Arsenic.

Explanation:

Hello there!

In this case, since insecticides are substances that act as poisons to get rid of insects in order to prevent their presence and/or reproduction in houses, companies, crops and others, a substance that has been widely used is the metalloid arsenic due to its direct affection of the insect's body (movement, performance, cellular functions).

In addition, high levels of arsenic in food could cause arsenic poisoning in humans as well, that is why such practice must be properly performed and by using the correct security protocol.

Best regards!

Answer:

As

Explanation:

hoffe das hilf jedem in der zukunft

Answer:

Explanation:

Fe⁺²(aq) + ClO₂(aq) → Fe⁺³(aq) + ClO₂⁻(aq)

Here oxidation number of Fe is increased from +2 to +3 , so Fe is oxidised .

The oxidation number of Cl is reduced from + 4 to +3  so Cl is reduced .

So ClO₂(aq) is oxidising agent and Fe⁺²(aq) is reducing agent .

Answer:

The disruption of the bonds or attractions occurs during protein hydrolysis which results in the loss for the primacy structure. The peptide bonds is the bond affected in this scenario.

The disruption of the bonds however only exist in the process of denaturation and this results in a change in the confirmation which could be secondary, tertiary, and quaternary structural related. And example of the bonds affected include salt bridges, disulfide bridges, hydrogen bonds etc.

Answer:

There are 6 Carbon dioxides, and 6 waters, but there are 6 carbons, 18 oxygens, and 12 hydrogens.

Explanation:

Answer:

6 carbon atoms

18 oxygen atoms

12 hydrogen atoms

Answer:

The molecular formula of the hydrocarbon is C10H10

Explanation:

Here, we are interested in finding the molecular formula for the hydrocarbon.

Since there are equal number of moles of carbon and hydrogen, then we have the molecular formula looking like;

CnHn

Kindly recall that the atomic mass of carbon is 12 a.m.u while that of hydrogen is 1 amu

so calculating the atomic mass of the compound, we have;

12(n) + 1(n) = 130.18

13n = 130.18

n = 130.18/13

n = 10.01

So the molecular formula will be C10H10

Answer:

C10H10

Explanation:

A hydrocarbon is a binary compound of carbon and hydrogen. Hence a hydrocarbon is a compound of the general formula (CH)n

Thus;

(12 + 1) n = 130.18

n= 130.18/13

n = 10

Hence the molecular formula of the compound is C10H10

Answer:

The electrons are found on the outer shell of the atom.

Explanation:

Answer:

The answer is 7.89

Explanation:

Mass of methane required to increase the temperature of the air in the room by 7.35 °C is 7.95 g

The volume of air in the room is first calculated:

Volume of air in the room = 4.33 m x 3.43 m x 3.03 = 45.00 m³

1 m³ = 1000 L

45.00 m³ = 45.00 m³ * 1000 L/m³

Volume of air in L = 45000 L

Number of moles of air in 45000 L of air is then determined:

1.00 moles of air occupies 22.4 L

number of moles of air in 45000 L = 45000 L * 1 mole / 22.4 L

number of moles of air = 2008.93 moles of air

Energy that is needed to heat the room by 7.35 °C is then calculated:

Quantity of energy needed = Specific heat capacity * number of moles * temperature increase

Specific heat capacity of air = 30.0 J/K/mole

Quantity of energy needed = 30.0 * 2008.93 * 7.35

Quantity of energy needed = 442969.065 J = 443.00 kJ

The amount of methane required to produce that amount of energy is then calculated:

Equation of combustion of methane : CH₄ + 2 O₂  ---> CO₂ + 2 H₂O

Enthalpy of combustion of methane = −890.3 kJ/mole

Number of moles of methane required = 443.00 kJ / 890.8 kJ/mole = 0.497 moles

Mass of 1 mole of methane = 16.0 g

mass of 0.497 moles of methane = 16.0 * 0.497 = 7.95 g

Therefore, mass of methane required to increase the temperature of the air in the room by 7.35 °C is 7.95 g

Learn more at: https: brainly.com/question/4213585

Answer:

The answer is

[tex] \huge 7.40 \times {10}^{21} Hz[/tex]

Explanation:

To find the frequency of the wave we use the formula

[tex]f = \frac{E}{h} \\ [/tex]

where

E is the energy

f is the frequency

h is the Planck's constant which is

6.626 × 10-³⁴ Js

From the question

E = 4.90 × 10-¹² J

So we have

[tex]f = \frac{4.90 \times {10}^{ - 12} }{6.626 \times {10}^{ - 34} } \\ [/tex]

We have the final answer as

[tex]7.40 \times {10}^{21} \: \: Hz[/tex]

Hope this helps you

Answer:

266Lr

Thirteen isotopes of lawrencium are currently known; the most stable is 266Lr with a half-life of 11 hours, but the shorter-lived 260Lr (half-life 2.7 minutes) is most commonly used in chemistry because it can be produced on a larger scale.

Explanation:

hopefully that helps you

Answer:

Yes, but it must be kept at that value and do not let it to decrease more.

Explanation:

Hello.

In this case, in order to substantiate whether the cabin meet the federal standards, we need to convert the 500 mmHg to atm and compare the result with 0.72 atm by knowing that 1 atm equals 760 mmHg:

[tex]500mmHg*\frac{1atm}{760mmHg} \\\\=0.66atm[/tex]

Thus, since 0.66 atm is 0.06 atm away from the federal standard we can infer that it may meet the federal standard, however, it would not be recommended to let the pressure decrease more than that.

Yes, the cabin pressurized at 500 mm hg meets federal standards.

1 atm is approximately equal to 760 mm Hg. Therefore, the pressure is:

500 mm Hg / 760 mm Hg/atm ≈ 0.65789 atm

So, the cabin pressure of 500 mm Hg is approximately 0.65789 atmospheres. If the atmospheric pressure at an elevation of 8000 feet averages about 0.72 atmospheres, then the cabin pressure of 0.65789 atmospheres would be lower than the ambient atmospheric pressure.

To meet federal standards, cabin pressure should be maintained at an equivalent pressure that allows occupants to breathe comfortably.

Learn more about pressure, here:

https://brainly.com/question/15189000

#SPJ6

Answer:

53/26Fe = 0/-1,B + 53/27 Co

Answer:

Kindly check the explanation section.

Explanation:

Without mincing words let us dive right into the solution to the question above, taking each compound at a time.

NB: Kindly Check attachment for the Lewis Structure of each of the chemical compounds.

Therefore, the number of valence electrons, electronic shape, molecular shape and whether the molecules are polar(Polarity) is given below for each chemical compound.

(1). Compound: HCN

(a). number of valence electrons = 10.

(b). electronic shape =linear.

(c). molecular shape = linear.

(d). Polarity = Y.

(2). Compound: PH3

(a). number of valence electrons = 8.

(b). electronic shape = Tetrahedral.

(c). molecular shape = Trigonal Pyramidal.

(d). Polarity = Y.

(3). Compound: CHCl3.

(a). number of valence electrons = 26.

(b). electronic shape = tetrahedral.

(c). molecular shape = tetrahedral.

(d). Polarity = Y.

(4). Compound: NH4^+

(a). number of valence electrons = 8

(b). electronic shape = tetrahedral

(c). molecular shape = tetrahedral

(d). Polarity = Y.

(5). Compound: H2CO

(a). number of valence electrons = 12.

(b). electronic shape = Trigonal planar.

(c). molecular shape = Trigonal planar

(d). Polarity = Y.

(6). Compound: SO4^2-

(a). number of valence electrons = 32.

(b). electronic shape = Tetrahedral.

(c). molecular shape = Tetrahedral.

(d). Polarity = N.

(7). Compound: SeF2.

(a). number of valence electrons = 20.

(b). electronic shape = Tetrahedral.

(c). molecular shape = bent.

(d). Polarity = Y.

(8). Compound: CO2.

(a). number of valence electrons = 16.

(b). electronic shape = linear.

(c). molecular shape = linear.

(d). Polarity = N.

(9). Compound: O2

(a). number of valence electrons = 32.

(b). electronic shape = Trigonal planar.

(c). molecular shape = Linear.

(d). Polarity = N.

(10). Compound: ClO4-.

(a). number of valence electrons = 32.

(b). electronic shape = Tetrahedral.

(c). molecular shape = Tetrahedral.

(d). Polarity = N.

(11). Compound: HBr.

(a). number of valence electrons = 8.

(b). electronic shape = Linear.

(c). molecular shape = Linear.

(d). Polarity = Y.

(12). Compound: PF5.

(a). number of valence electrons = 40.

(b). electronic shape = Trigonal Bipyramidal.

(c). molecular shape = Trigonal Bipyramidal.

(d). Polarity = N.

(13). Compound: BeH2.

(a). number of valence electrons = 4.

(b). electronic shape = Linear.

(c). molecular shape = Linear.

(d). Polarity = N.

(14). Compound: PO4^3-.

(a). number of valence electrons = 32.

(b). electronic shape = Tetrahedral.

(c). molecular shape = Tetrahedral.

(d). Polarity = N.

(15). Compound: BH3.

(a). number of valence electrons = 6.

(b). electronic shape = Trigonal planar.

(c). molecular shape = Trigonal planar.

(d). Polarity = N

(16). Compound: Br3-.

(a). number of valence electrons = 32.

(b). electronic shape = Trigonal Bipyramidal.

(c). molecular shape = Linear.

(d). Polarity = N.

Answer:

high melting points, dissolve easily in water, conduct electricity when melted.

Explanation:

I'm pretty sure

Answer:

We are given that there is 95% ethanol by mass in rectified spirit

so, we can say that in a 100g sample, we have 95 grams of ethanol and 5 grams of water

we will find the number of moles of ethanol and water in 100g solution of rectified spirit and use that to calculate the mole fraction

Moles of Ethanol:

Molar mass of ethanol = 46 grams / mol

Number of moles = Given mass / molar mass

Number of moles = 95 / 46

Moles of Ethanol = 2 moles (approx)

Moles of Water:

Molar mass of water = 18 grams per mol

Number of moles = Given mass / molar mass

Moles of water = 5 / 18

Moles of water  =  0.28 moles   (approx)

Mole Fractions:

Mole fraction of a specific compound is the number of moles of that compound divided by the total number of moles in the solution

Mole fraction of Ethanol:

Moles of ethanol / (moles of ethanol + moles of water)

2 / (2 + 0.28)

2 / (2.28) = 0.9 (approx)

Mole fraction of Water:

Moles of water / (Moles of ethanol + moles of water)

0.28 / (2 + 0.28)

0.28 / (2.28) = 0.1 (approx)

Answer:

def compute_volume(pressure,moles,temperature):

    volume = (8.314 * moles * temperature)/pressure

    print("Volume: "+str(volume))

Explanation:

This line defines the function

def compute_volume(pressure,moles,temperature):

This line calculates the volume

    volume = (8.314 * moles * temperature)/pressure

This line prints the calculated volume

    print("Volume: "+str(volume))

Answer:

d

Explanation:

Answer:

strong base

Explanation:

aaaaaaaaaaaaa

Answer:

0.307

Explanation:

use the formula of n=mass /molar mass

Answer:

What mass of sodium hydroxide is needed to react completely with 10.0 g of iron( III) chloride? The conversion sequence is: A. B.

Explanation:

make me as brain liest

Answer:

In carbon dioxide, on the right, there is 2.666 g of oxygen for every gram of carbon. So the ratio of oxygen in the two compounds is 1:2, a small whole number ratio

please mark me as the brainliest answer and please please pleaseeee follow me.

Explanation:

heat

the presence of hot, plastic like material

Answer:

Explanation:The ether functional group consists of an oxygen atom that forms single bonds with two carbon atoms

Answer:

False

Explanation:

It is the other way round, a black object appears black because it absorbs all the wavelength of light and does not reflect any light.