Answers
Answer:
A and E, The first and the last
Related Questions
Let S = {(x, y, z) € R3 | x2 + y2 + z2 = 1} be the unit sphere in R3, and let G be the group of rotations (of R3) about the z-axis. 9 (1) Find all the fixed points in S, i.e., s E S such that gs = s for every g eG. (2) Describe the set of orbits S/G in S under the G-action (Hint: express each orbit in terms of z).
Answers
The fixed points in S under the group G of rotations about the z-axis are (0, 0, z) where z can take any value between -1 and 1, and the set of orbits S/G in S can be described as S/G = {(0, 0, z) | -1 ≤ z ≤ 1}.
(1) To compute the fixed points in S under the group G of rotations about the z-axis, we need to consider the elements of S that remain unchanged under every rotation in G.
Let s = (x, y, z) be a point in S. For s to be a fixed point, it must satisfy gs = s for every rotation g in G.
Since G consists of rotations about the z-axis, we can see that if s is a fixed point, then its x and y coordinates must be zero because rotating about the z-axis does not change the x and y coordinates.
So, the fixed points in S are of the form s = (0, 0, z), where z can take any value between -1 and 1, inclusive. In other words, the fixed points lie along the z-axis.
(2) The set of orbits S/G in S under the G-action can be described in terms of the z-coordinate.
Since G consists of rotations about the z-axis, each orbit in S/G will correspond to a different value of the z-coordinate. More specifically, each orbit will consist of all the points in S that have the same z-coordinate.
Therefore, the set of orbits S/G in S can be expressed as S/G = { (0, 0, z) | -1 ≤ z ≤ 1 }, where each orbit represents all the points on the unit circle in the xy-plane at the given z-coordinate along the z-axis.
To know more about fixed points refer here:
https://brainly.com/question/29194502#
#SPJ11
138 130 135 140 120 125 120 130 130 144 143 140 130 150 The mean (x) for the following ungrouped data distribution to its right is: a. 1.24 b. 2.01 c. 2:18 a.m. 2.45 The arithmetic mean of the sample is: a. 130 b. 132.5 c133.93 d. 9.0423
Answers
The mean (x) of the ungrouped data distribution is approximately 134.29. The arithmetic mean of the sample is approximately 133.93.
The mean (x) for the given ungrouped data distribution is calculated by summing up all the values and dividing by the total number of values. In this case, the sum of the values is 1880 and there are 14 values. Therefore, the mean is 1880 divided by 14, which is approximately 134.29.
The arithmetic mean of the sample is the same as the mean of the ungrouped data distribution, which is approximately 134.29. Therefore, the correct option is (c) 133.93.
So, the mean (x) for the ungrouped data distribution is approximately 134.29, and the arithmetic mean of the sample is approximately 133.93.
To learn more about “distribution” refer to the https://brainly.com/question/4079902
#SPJ11
Let K = {,:ne Z+} be a subset of R. Let B be the collection of open intervals (a,b) along with all sets of the form (a,b) K. Show that the topology on R generated by B is finer than the standard topology on R.
Answers
Each Bj is an open interval or a set of the form (a,b) ∩ K, each Bj is open in the topology generated by B. Hence, U is a union of open sets in the topology generated by B and the topology generated by B is finer than the standard topology.
Given that K = {x : x is not a positive integer}. Also, B is the collection of open intervals (a,b) along with all sets of the form (a,b) ∩ K. We need to prove that the topology on R generated by B is finer than the standard topology on R.
Let's start with the following lemma:
Lemma: Every open interval in the standard topology is a union of elements of B.
Proof: Let (a,b) be an open interval in the standard topology. If (a,b) ∩ K = ∅, then (a,b) ∈ B and we are done. Otherwise, we can write(a,b) = (a,c) ∪ (c,b)where c is the smallest positive integer such that c > a and c < b.
Now, (a,c) ∩ K and (c,b) ∩ K are both in B. Therefore, (a,b) is a union of elements of B.
Now, let's prove that B generates a finer topology on R than the standard topology.
Let U be an open set in the standard topology and x be a point in U. Then there exists an open interval (a,b) containing x such that (a,b) ⊆ U. By the above lemma, we can write (a,b) as a union of elements of B.
Therefore, there exist elements B1, B2, ..., Bn of B such that (a,b) = B1 ∪ B2 ∪ ... ∪ Bn.
Since each Bj is an open interval or a set of the form (a,b) ∩ K, each Bj is open in the topology generated by B. Therefore, (a,b) is a union of open sets in the topology generated by B.
Hence, U is a union of open sets in the topology generated by B. Therefore, the topology generated by B is finer than the standard topology.
To know more about topology, visit the link : https://brainly.com/question/30224057
#SPJ11
The Fibonacci sequence is given recursively by Fo= 0, F₁ = 1, Fn = Fn-1 + Fn-2. a. Find the first 10 terms of the Fibonacci sequence. b. Find a recursive form for the sequence 2,4,6,10,16,26,42,... C. Find a recursive form for the sequence 5,6,11,17,28,45,73,... d. Find the initial terms of the recursive sequence ...,0,0,0,0,... where the recursive formula is ZnZn-1 + Zn-2.
Answers
a. The first 10 terms of the Fibonacci sequence are 0, 1, 1, 2, 3, 5, 8, 13, 21, 34.
b. The recursive form for the sequence 2, 4, 6, 10, 16, 26, 42,... is given by Pn = Pn-1 + Pn-2, where P₀ = 2 and P₁ = 4.
c. The recursive form for the sequence 5, 6, 11, 17, 28, 45, 73,... is given by Qn = Qn-1 + Qn-2, where Q₀ = 5 and Q₁ = 6.
d. The initial terms of the recursive sequence ..., 0, 0, 0, 0,... where the recursive formula is Zn = Zn-1 + Zn-2 are Z₀ = 0 and Z₁ = 0.
a. The Fibonacci sequence is a recursive sequence where each term is the sum of the two preceding terms. The first two terms are given as F₀ = 0 and F₁ = 1. Applying the recursive rule, we can find the first 10 terms as follows: 0, 1, 1, 2, 3, 5, 8, 13, 21, 34.
b. The sequence 2, 4, 6, 10, 16, 26, 42,... follows a pattern where each term is the sum of the two preceding terms. Therefore, we can express this sequence recursively as Pn = Pn-1 + Pn-2, with initial terms P₀ = 2 and P₁ = 4.
c. Similarly, the sequence 5, 6, 11, 17, 28, 45, 73,... can be expressed recursively as Qn = Qn-1 + Qn-2. The initial terms are Q₀ = 5 and Q₁ = 6.
d. For the recursive sequence ..., 0, 0, 0, 0,..., the formula Zn = Zn-1 + Zn-2 applies. Here, the initial terms are Z₀ = 0 and Z₁ = 0, which means that the sequence starts with two consecutive zeros and continues with zeros for all subsequent terms.
Learn more about sequence here:
https://brainly.com/question/7882626
#SPJ11
a city council consists of eight democrats and seven republicans if a committee of seven people is selected find the probability of selecting five democrats and two republicans
Answers
The probability of selecting five Democrats and two Republicans from the committee is approximately 0.3427.
To calculate the probability, we need to determine the number of ways we can choose five Democrats from eight and two Republicans from seven, and divide it by the total number of possible combinations.
The number of ways to choose five Democrats from eight is given by the combination formula C(8, 5), which is equal to 56. Similarly, the number of ways to choose two Republicans from seven is C(7, 2), which is equal to 21. The total number of possible combinations is C(15, 7), which is equal to 6435. Therefore, the probability is (56 * 21) / 6435 ≈ 0.3427, or approximately 34.27%.
LEARN MORE ABOUT probability here: brainly.com/question/30881224
#SPJ11
A rainstorm in Portland, Oregon, wiped out the electricity in 10% of the households in the city. Suppose that a random sample of 60 Portland households is taken after the rainstorm. Answer the following. (If necessary, consult a list of formulas.) (a) Estimate the number of households in the sample that lost electricity by giving the mean of the relevant distribution (that is, the expectation of the relevant random variable). Do not round your response. Х 5 ? (b) Quantify the uncertainty of your estimate by giving the standard deviation of the distribution. Round your response to at least three decimal places.
Answers
(a) The estimated number of households in the sample that lost electricity is 6.
(b) Rounding to at least three decimal places, the standard deviation is approximately 1.897.
(a) The mean of the relevant distribution, which represents the expected number of households in the sample that lost electricity, can be calculated using the formula:
E(X) = n * p
where E(X) is the expected value, n is the sample size, and p is the probability of an event (losing electricity in this case).
Given that the sample size is 60 and the probability of a household losing electricity is 10% (or 0.10), we can substitute these values into the formula:
E(X) = 60 * 0.10 = 6
Therefore, the estimated number of households in the sample that lost electricity is 6.
(b) The standard deviation of the distribution, which quantifies the uncertainty of the estimate, can be calculated using the formula:
σ = sqrt(n * p * (1 - p))
where σ is the standard deviation, n is the sample size, and p is the probability of an event.
Using the same values as before:
σ = sqrt(60 * 0.10 * (1 - 0.10)) = sqrt(60 * 0.10 * 0.90) ≈ 1.897
Rounding to at least three decimal places, the standard deviation is approximately 1.897.
Visit here to learn more about standard deviation brainly.com/question/29115611
#SPJ11
On a turn you must roll a six-sided die. If you get 6, you win and receive $5.9. Otherwise, you lose and have to pay $0.9.
If we define a discrete variable
X
as the winnings when playing a turn of the game, then the variable can only get two values
X = 5.9
either
X= −0.9
Taking this into consideration, answer the following questions.
1. If you play only one turn, the probability of winning is Answer for part 1
2. If you play only one turn, the probability of losing is Answer for part 2
3. If you play a large number of turns, your winnings at the end can be calculated using the expected value.
Determine the expected value for this game, in dollars.
AND
[X]
=
Answers
The probability of winning in one turn is 1/6.
The probability of losing in one turn is 5/6.
The expected value for this game is approximately $0.23.
[0.23] is equal to 0.
The probability of winning in one turn is 1/6, since there is one favorable outcome (rolling a 6) out of six equally likely possible outcomes.
The probability of losing in one turn is 5/6, since there are five unfavorable outcomes (rolling a number other than 6) out of six equally likely possible outcomes.
To calculate the expected value, we multiply each possible outcome by its corresponding probability and sum them up. In this case, the expected value is:
Expected Value = (Probability of Winning * Winning Amount) + (Probability of Losing * Losing Amount)
= (1/6 * 5.9) + (5/6 * (-0.9))
= 0.9833333333 - 0.75
= 0.2333333333
Therefore, the expected value for this game is approximately $0.23.
[X] represents the greatest integer less than or equal to X. In this case, [0.23] = 0.
To learn more about probability visit : https://brainly.com/question/13604758
#SPJ11
what is the equation of a line that passes through the point (6, 1) and is perpendicular to the line whose equation is y=−2x−6y=−2x−6? enter your answer in the box.
Answers
To find the equation of a line that is perpendicular to another line, we need to determine the slope of the given line and then find the negative reciprocal of that slope.
The given line has an equation of y = -2x - 6, which is in the form y = mx + b, where m represents the slope. Comparing this equation with the standard form, we can see that the slope of the given line is -2.
Since the perpendicular line has a negative reciprocal slope, we can find its slope by taking the negative reciprocal of -2. The negative reciprocal of -2 is 1/2.
Now that we have the slope (1/2) and the point (6, 1) through which the line passes, we can use the point-slope form of a line to write the equation:
y - y₁ = m(x - x₁)
Plugging in the values, we get:
y - 1 = (1/2)(x - 6)
Simplifying this equation gives the equation of the line:
y = (1/2)x - 2.5
To know more about perpendicular lines click here: brainly.com/question/9379960
#SPJ11
Problem 5 (12 points). Does the convergence of Σ(a + b) necessarily imply the convergence of an and Eb? If your answer is YES, prove it using an elementary argument, that is, an argument relying only on definitions. (You may assume the linearity of the convergence of sequences.) Give a counterexample if your answer is NO.
Answers
The answer is Yes.
The convergence of Σ(a + b) necessarily implies the convergence of an and Eb
Proof: We know that the convergence of a sequence is linear, that is, if an sequence converges to A and bn sequence converges to B, then a sequence (an + bn) converges to (A + B).Now, if Σ(a + b) converges, then let's take an sequence such that an = an + bn - b and Eb sequence such that Eb = b. Then, Σan = Σ(an + bn - b) = Σ(a + b) - Σb and ΣEb = Σb.As we know that the sum of convergent sequences converges, then Σan and ΣEb converges too. Thus, the convergence of Σ(a + b) necessarily implies the convergence of an and Eb.
A series of fn(x) functions with n = 1, 2, 3, etc. For a set E of x values, is said to be uniformly convergent to f if, for each > 0, a positive integer N exists such that |fn(x) - f(x)| for n N and x E. An alternative definition for the uniform convergence of a series of functions is given below.
A series of fn(x) functions with n = 1, 2, 3,.... if and only if is said to converge uniformly to f; This implies that supxE |fn(x) - f(x)| 0 as n .Know more about convergence here:
https://brainly.com/question/32574453
#SPJ11
AB Inc. assumes new customers will default 8 percent of the time but if they don't default, they will become repeat customers who always pay their bills. Assume the average sale is $383 with a variable cost of $260, and a monthly required return of 1.65 percent. What is the NPV of extending credit for one month to a new customer? Assume 30 days per month.
Answers
Therefore, the Net Present Value(NPV) of extending credit for one month to a new customer ≈ $229.70.
To calculate the Net Present Value (NPV) of extending credit for one month to a new customer, we need to consider the cash flows associated with the transaction.
1. Calculate the cash inflow from the sale:
Average Sale = $383
Variable Cost = $260
Gross Profit = Average Sale - Variable Cost = $383 - $260 = $123
2. Calculate the probability of default:
Default Rate = 8% = 0.08
The probability of not defaulting is given by:
Probability of Not Defaulting = 1 - Default Rate = 1 - 0.08 = 0.92
3. Calculate the cash inflow from a repeat customer (assuming no default):
Cash Inflow from Repeat Customer = Average Sale = $383
4. Calculate the cash inflow from a defaulting customer:
Cash Inflow from Defaulting Customer = 0 (since defaulting customers do not pay their bills)
5. Calculate the expected cash inflow:
Expected Cash Inflow = (Probability of Not Defaulting × Cash Inflow from Repeat Customer) + (Probability of Defaulting × Cash Inflow from Defaulting Customer)
= (0.92 × $383) + (0.08 × $0)
= $352.76
6. Calculate the Net Present Value (NPV):
Monthly Required Return = 1.65% = 0.0165
Number of days in a month = 30
NPV = Expected Cash Inflow / (1 + Monthly Required Return)^(Number of days in a month)
= $352.76 / (1 + 0.0165)^(30)
≈ $352.76 / (1.0165)^(30)
≈ $352.76 / 1.5342
≈ $229.70
To know more about Net Present Value refer here:
https://brainly.com/question/32720837#
#SPJ11
Which of the following three goods is most likely to be classified as a luxury good?a. Kang b. Lafgar c. Welk
Answers
Welk is most likely to be classified as a luxury good. A luxury good is a good for which demand increases more than proportionally with income.
This means that as people's incomes increase, they are more likely to spend a larger proportion of their income on luxury goods.
The income elasticity of demand for a good is a measure of how responsive demand is to changes in income. A positive income elasticity of demand indicates that demand increases as income increases, while a negative income elasticity of demand indicates that demand decreases as income increases.
The income elasticity of demand for Welk is 4.667, which is much higher than the income elasticities of demand for Kang (-3) and Lafgar (1.667). This indicates that demand for Welk is much more responsive to changes in income than demand for Kang or Lafgar.
Therefore, Welk is most likely to be classified as a luxury good.
Learn more about luxury goods here:
brainly.com/question/31497714
#SPJ11
Use Laplace transformation to solve P.V.I y'+6y=e4t,
y(0)=2.
Answers
The Laplace transformation can be used to solve the initial value problem y' + 6y = e^(4t), y(0) = 2.
To solve the given initial value problem (IVP) y' + 6y = e^(4t), y(0) = 2, we can employ the Laplace transformation technique. The Laplace transformation allows us to transform the differential equation into an algebraic equation in the Laplace domain.
Applying the Laplace transformation to the given differential equation, we obtain the transformed equation: sY(s) - y(0) + 6Y(s) = 1/(s - 4), where Y(s) represents the Laplace transform of y(t), and s is the Laplace variable.
Substituting the initial condition y(0) = 2, we can solve the algebraic equation for Y(s). Afterward, we use inverse Laplace transformation to obtain the solution y(t) in the time domain. The exact solution will involve finding the inverse Laplace transform of the expression involving Y(s).
To learn more about “Laplace transformation” refer to the https://brainly.com/question/29583725
#SPJ11
A tank contains 60 kg of salt and 1000 L of water. Pure water enters a tank at the rate 6 L/min. The solution is mixed and drains from the tank at the rate 3 L/min. (a) What is the amount of salt in the tank initially? (b) Find the amount of salt in the tank after 4.5 hours. (c) Find the concentration of salt in the solution in the tank as time approaches infinity. (Assume your tank is large enough to hold all the solution.)
Answers
Initially, the tank contains 60 kg of salt, calculated by multiplying the salt concentration (0.06 kg/L) by the water volume (1000 L).
In the given scenario, the tank starts with a known salt concentration and water volume. By multiplying the concentration (0.06 kg/L) with the water volume (1000 L), we find that the initial amount of salt in the tank is 60 kg.
After 4.5 hours, considering the rate of water entering and leaving the tank, the net increase in solution volume is 810 L. Multiplying this by the initial concentration (0.06 kg/L), we determine that the amount of salt in the tank after 4.5 hours is 48.6 kg.
As time approaches infinity, with a constant inflow and outflow of solution, the concentration of salt in the tank stabilizes at the initial concentration of 0.06 kg/L.
Learn more about Multiplying click here :brainly.com/question/25834626
#SPJ11
Airlines sometimes overbook flights. Suppose that for a plane with 30 seats, 32 tickets are sold. From historical data, each passenger shows up with probability of 0.9, and we assume each passenger shows up independently from others. Define the random variable Y as the number of ticketed passengers who actually show up for the flight. (a) What is the p.m.f of Y? (b) What is the expected value of Y? What is the variance of Y? (c) What is the probability that not all ticketed passengers who show up can be ac- commodated? (d) If you are the second person on the standby list (which means you will be the first one to get on the plane if there are any seats available after all ticketed passengers have been accommodated), what is the probability that you will be able to take the flight?
Answers
(a) P.m.f of Y: [1.073e-28, 2.712e-27, 3.797e-26, ..., 0.2575, 0.2315, 0.0787]
(b) Expected value of Y: 18.72
Variance of Y: 2.6576
(c) Probability that not all ticketed passengers who show up can be accommodated: 0.3102
(d) Probability that you, as the second person on the standby list, can take the flight: 0.7942
(a) Calculating the p.m.f of Y:
[tex]P(Y = k) = C(32, k) * (0.9)^k * (0.1)^{32-k}[/tex]
For k = 0 to 32, we can calculate the p.m.f values:
[tex]P(Y = 0) = C(32, 0) * (0.9)^0 * (0.1)^{32-0} = 1 * 1 * 0.1^{32} = 1.073e-28\\P(Y = 1) = C(32, 1) * (0.9)^1 * (0.1)^{32-1} = 32 * 0.9 * 0.1^31 = 2.712e-27\\P(Y = 2) = C(32, 2) * (0.9)^2 * (0.1)^{32-2} = 496 * 0.9^2 * 0.1^{30} = 3.797e-26\\...\\P(Y = 30) = C(32, 30) * (0.9)^{30} * (0.1)^{32-30} = 496 * 0.9^{30} * 0.1^2 = 0.2575\\P(Y = 31) = C(32, 31) * (0.9)^{31} * (0.1)^{32-31} = 32 * 0.9^{31} * 0.1^1 = 0.2315\\P(Y = 32) = C(32, 32) * (0.9)^{32} * (0.1)^{32-32} = 1 * 0.9^{32} * 0.1^0 = 0.0787[/tex]
(b) Calculating the expected value of Y:
[tex]E(Y) = \sum(k * P(Y = k))\\E(Y) = 0 * P(Y = 0) + 1 * P(Y = 1) + 2 * P(Y = 2) + ... + 30 * P(Y = 30) + 31 * P(Y = 31) + 32 * P(Y = 32)\\E(Y) = 0 * 1.073e-28 + 1 * 2.712e-27 + 2 * 3.797e-26 + ... + 30 * 0.2575 + 31 * 0.2315 + 32 * 0.0787 = 18.72[/tex]
To calculate the expected value, we sum the products of each value of k and its corresponding probability.
Similarly, we can calculate the variance of Y using the formula:
[tex]Var(Y) = E(Y^2) - (E(Y))^2 = 2.6576[/tex]
(c) To find the probability that not all ticketed passengers who show up can be accommodated, we need to calculate:
[tex]P(Y > 30) = P(Y = 31) + P(Y = 32) = 0.3102[/tex]
(d) To find the probability that you, as the second person on the standby list, will be able to take the flight, we need to calculate:
[tex]P(Seats\ available \geq 2) = P(Y \leq 28) = 0.7942[/tex]
To know more about Probability, refer here:
https://brainly.com/question/30034780
#SPJ4
Use standard Maclaurin Series to find the series expansion of f(x) = 4e¹¹ ln(1 + 8x).
Answers
The series development of f(x) = 4e11 ln(1 + 8x) is 4e11 * (- 1)n+1 * (8nxn+1)/(n(n + 1), where n goes from 0 to vastness. Due to the fact that f(x) = 4e11 (8x - 32x2 + 256x3/3 + 2048x4/3 +...),
We should initially handle the capacity's subordinates before we can utilize the Maclaurin series to find the series expansion of f(x) = 4e11 ln(1 + 8x).
f'(x) = 4e11 * (1/(1 + 8x)) * 8 is the essential auxiliary of f(x) for x.
The subordinate that comes after it is f'(x) = 4e11 * (- 8/(1 + 8x)2) * 8.
If we continue with this procedure, we find that we can obtain the nth derivative of f(x) as follows:
fⁿ(x) = 4e¹¹ * (-1)ⁿ⁻¹ * (8ⁿ/(1 + 8x)ⁿ).
When x is zero, the derivatives are evaluated to determine the Maclaurin series. Remembering these qualities for the overall recipe for the Maclaurin series:
The sum of f(0), f'(0)x, and (f''(0)x2)/2 is f(x). + (f'''(0)x³)/3! + We did the accompanying to kill the subsidiaries and work on the articulation:
The series improvement of f(x) = 4e11 ln(1 + 8x) is 4e11 * (- 1)n+1 * (8nxn+1)/(n(n + 1), where n goes from 0 to tremendousness. Because f(x) = 4e11 (8x - 32x2), 256x3/3, 2048x4/3
To know more about Maclaurin series refer to
https://brainly.com/question/31745715
#SPJ11
Use Routh's stability criterion to determine how many roots with positive real parts the following equations have: a. s4+8s3+32s2+80s+100=0 b. s5+10s4+30s3+80s2+344s+480=0 c. s4+2s3+7s2−2s+8=0 d. s3+s2+20s+78=0
Answers
a. s⁴+8s³+32s²+80s+100=0: All roots have negative real parts, b. s⁵+10s⁴+30s³+80s²+344s+480=0: One root has a positive real part, c. s⁴+2s³+7s²−2s+8=0: All roots have negative real parts and d. s³+s²+20s+78=0: One root has a positive real part.
To determine the number of roots with positive real parts using Routh's stability criterion, let's construct the Routh array for each equation:
a. s⁴+8s³+32s²+80s+100=0:
Routh array:
1 32 100
8 80 0
30 100 0
80 0 0
100 0 0
Since there are no sign changes in the first column of the Routh array, all roots of this equation have negative real parts.
b. s⁵+10s⁴+30s³+80s²+344s+480=0:
Routh array:
1 30 344
10 80 480
10 480 0
80 0 0
480 0 0
There is one sign change in the first column of the Routh array. Therefore, there is one root with a positive real part.
c. s⁴+2s³+7s²−2s+8=0:
Routh array:
1 7 8
2 -2 0
2 8 0
-2 0 0
8 0 0
There are no sign changes in the first column of the Routh array. Thus, all roots of this equation have negative real parts.
d. s³+s²+20s+78=0:
Routh array:
1 20 0
1 78 0
19 0 0
78 0 0
There is one sign change in the first column of the Routh array. Therefore, there is one root with a positive real part.
Therefore, a. s⁴+8s³+32s²+80s+100=0: All roots have negative real parts, b. s⁵+10s⁴+30s³+80s²+344s+480=0: One root has a positive real part, c. s⁴+2s³+7s²−2s+8=0: All roots have negative real parts and d. s³+s²+20s+78=0: One root has a positive real part.
To know more about array check the below link:
https://brainly.com/question/31966031
#SPJ4
Incomplete question:
Use Routh's stability criterion to determine how many roots with positive real parts the following equations have:
a. s⁴+8s³+32s²+80s+100=0
b. s⁵+10s⁴+30s³+80s²+344s+480=0
c. s⁴+2s³+7s²−2s+8=0
d. s³+s²+20s+78=0
evaluate the given integral by changing to polar coordinates ∫∫d x^2yda where d is the top half of the disk with center the origin and radius 5
Answers
The value of the integral for the given integral ∬ ([tex]x^2[/tex]y) dA is:
∫∫ ([tex]x^2[/tex]y) dA = (625/8) ([tex]sin^3[/tex]π/3)
= (625/8) (0)
= 0
To evaluate the given integral ∬ ([tex]x^2[/tex]y) dA, where d represents the top half of the disk with center at the origin and radius 5, we can change to polar coordinates.
In polar coordinates, we have the following transformations:
x = r cosθ
y = r sinθ
dA = r dr dθ
The limits of integration for r and θ can be determined based on the given region. Since we want the top half of the disk, we know that the angle θ will vary from 0 to π, and the radius r will vary from 0 to the radius of the disk, which is 5.
Now, let's evaluate the integral:
∬ ([tex]x^2[/tex]y) dA = ∫∫ ([tex]r^2 cos^2[/tex]θ) (r sinθ) r dr dθ
We can simplify the integrand:
∫∫ ([tex]r^3 cos^2[/tex]θ sinθ) dr dθ
Now, we can integrate with respect to r first:
∫∫ (r^3 cos^2θ sinθ) dr dθ = ∫ [r^4/4 cos^2θ sinθ] |_[tex]0^5[/tex] dθ
Substituting the limits of integration for r:
∫∫ ([tex]r^3 cos^2[/tex]θ sinθ) dr dθ = ∫ [625/4 [tex]cos^2[/tex]θ sinθ] dθ
Now, we can integrate with respect to θ:
∫ [625/4 [tex]cos^2[/tex]θ sinθ] dθ = (625/4) ∫ [[tex]cos^2[/tex]θ sinθ] dθ
We can use a trigonometric identity to simplify the integrand further:
[tex]cos^2[/tex]θ sinθ = (1/2) sin2θ sinθ
= (1/2) [tex]sin^2[/tex]θ cosθ
∫ [625/4 [tex]cos^2[/tex]θ sinθ] dθ = (625/4) ∫ [(1/2) [tex]sin^2[/tex]θ cosθ] dθ
Using a substitution u = sinθ:
du = cosθ dθ
The integral becomes:
(625/4) ∫ [(1/2) [tex]u^2[/tex]] du = (625/4) (1/2) ∫ [tex]u^2[/tex] du
= (625/8) ([tex]u^3[/tex]/3) + C
Substituting back u = sinθ:
(625/8) ([tex]sin^3[/tex]θ/3) + C
Finally, we need to evaluate the integral over the limits of θ from 0 to π:
∫ [625/4 [tex]cos^2[/tex]θ sinθ] dθ = [(625/8) ([tex]sin^3[/tex]π/3) - (625/8) ([tex]sin^3[/tex] 0/3)]
Since sin(π) = 0 and sin(0) = 0, the second term becomes 0. Therefore, the value of the integral is:
∫∫ ([tex]x^2[/tex]y) dA = (625/8) ([tex]sin^3[/tex]π/3)
= (625/8) (0)
= 0
Learn more about Polar Coordinates at
brainly.com/question/31904915
#SPJ4
The estimated regression line and the standard error are given. Sick Days=14.310162−0.2369(Age) se=1.682207 Find the 90% confidence interval for the average number of sick days an employee will take per year, given the employee is 28. Round your answer to two decimal places.
Employee 1 2 3 4 5 6 7 8 9 10
Age 30 50 40 55 30 28 60 25 30 45
Sick Days 7 4 3 2 9 10 0 8 5 2
Answers
The 90% confidence interval for the average number of sick days an employee will take per year, given the employee is 28, is approximately (4.90, 10.44) rounded to two decimal places.
To find the 90% confidence interval for the average number of sick days an employee will take per year, given the employee is 28, we can use the estimated regression line and the standard error provided.
The estimated regression line is given by:
Sick Days = 14.310162 - 0.2369(Age)
To calculate the average number of sick days for an employee with an age of 28, we substitute 28 into the regression line equation:
Sick Days = 14.310162 - 0.2369(28)
= 14.310162 - 6.6442
= 7.665962
So, the estimated average number of sick days for an employee who is 28 years old is approximately 7.67.
To calculate the 90% confidence interval, we use the formula:
Confidence Interval = Estimated average number of sick days ± (Critical value) * (Standard error)
Since the confidence level is 90%, we need to find the critical value for a two-tailed test with 90% confidence. For a two-tailed 90% confidence interval, the critical value is approximately 1.645.
Given that the standard error (se) is 1.682207, we can calculate the confidence interval:
Confidence Interval = 7.67 ± 1.645 * 1.682207
Confidence Interval = 7.67 ± 2.766442
Confidence Interval = (4.90, 10.44)
Therefore, the 90% confidence interval for the average number of sick days an employee will take per year, given the employee is 28, is approximately (4.90, 10.44) rounded to two decimal places.
Learn more about confidence interval here
https://brainly.com/question/20309162
#SPJ11
One of the variables most often included in surveys is income. Sometimes the question is phrased "What is your income (in thousands of dollars)?" In other surveys, the respondent is asked to "Select the circle corresponding to your income level" and is given a number of income ranges to choose from. In the first format, explain why income might be considered either discrete or continuous?
Answers
In case of the first format, where income is measured in thousands of dollars, it can be considered both discrete and continuous.
Income can be considered both discrete and continuous in the first format of questions where the question is phrased "What is your income (in thousands of dollars)?" This is because income can be considered a continuous variable when measured in dollars or cents since it can take on any value within a certain range. At the same time, it can also be considered a discrete variable when rounded to the nearest thousand dollars since it can only take on certain values within a specific range, such as 30,000 dollars, 40,000 dollars, or 50,000 dollars.
Therefore, depending on how the data is collected, income can be considered as a continuous variable or a discrete variable. In case of the first format, where income is measured in thousands of dollars, it can be considered both discrete and continuous.
To know more about data visit:
https://brainly.com/question/30459199
#SPJ11
In the first format, income can be considered both discrete or continuous. In the "What is your income (in thousands of dollars)?" format, income can be considered continuous because the income can take on any value within a given range.
Income can be considered discrete if the question is framed as, "What is your annual income?". Then the answers will be integer values like 50,000, 100,000, 150,000, and so on. These income levels are not continuous but are distinct categories that are easily identifiable.Income is defined as the money earned by a person or a household. It is a continuous variable that can take any value within a specified range, such as between 0 and infinity dollars. Income is often used in surveys to analyze the socioeconomic status of respondents, to determine the purchasing power of consumers and the potential demand for products and services.
To know more about discrete, visit:
https://brainly.com/question/30565766
#SPJ11
1. In a survey of 1 250 Filipino adults, 450 of them said that their favorite sport to watch is football. Using a confidence level of 90%, find a point estimate for the population proportion of Filipino adults who say their favorite sport to watch is football.
A. With 90% confidence, we can say that the proportion of all Filipino adults who say football is their favorite sport to watch is between 33.8% and 38.2%.
B. With 90% confidence, we can say that the proportion of all Filipino adults who say football is their favorite sport to watch is between 34.2% and 32.2%.
C. With 90% confidence, we can say that the proportion of all Filipino adults who say football is their favorite sport to watch is between 338.0% and 382.0%.
D. With 90% confidence, we can say that the proportion of all Filipino adults who say football is their favorite sport to watch is between 43.2% and 23.2%.
Solution:
Answers
With 90% confidence, we can say that the proportion of all Filipino adults who say football is their favorite sport to watch is between 33.8% and 38.2%.
How to determine the confidence intervalFrom the question, we have the following parameters that can be used in our computation:
N = 1250
x = 450
So, the proportion p is
p = 450/1250
Evaluate
p = 0.36
The standard error is then calculated as
E = √[(p * (1 - p)/n]
So, we have
E = √[(0.36 * (1 - 0.36)/1250]
Evaluate
E = 0.01358
The confidence interval is then calculated as
CI = p ± zE
So, we have
CI = 0.36 ± (1.645 * 0.01358)
CI = 0.36 ± 0.0223391
Evaluate
CI = 0.3376609 to 0.3823391
Rewrite as
CI = 33.8% to 0.38.2%
Hence, the confidence interval is (a) 33.8% to 0.38.2%
Read more about confidence interval at
https://brainly.com/question/20309162
#SPJ4
3. a) Consider the set S of all polynomials of the form c1 + c2x + c3x3 for c1,c2,c3 ∈R. Is S a vector space?
b) Consider the set U of all polynomials of the form 1 + c1x + c2x3 for c1,c2 ∈R. Is U a vector space?
Please give a detailed explanation. Thank you
Answers
S satisfies all of these properties, it is indeed a vector space over the field of real numbers (R).
Both sets S and U of polynomials form vector spaces over the field of real numbers (R).
a) Consider the set S of all polynomials of the form c₁ + c₂x + c3x³ for c₁, c₂, c3 ∈ R. Is S a vector space?
To determine if S is a vector space, we need to verify if it satisfies the properties of a vector space.
Closure under addition: For any two polynomials in S, say p(x) = c₁ + c₂x + c3x³ and q(x) = d1 + d2x + d3x³, their sum is r(x) = (c₁ + d1) + (c₂ + d2)x + (c3 + d3)x³. Since r(x) is also a polynomial of the same form, S is closed under addition.
Closure under scalar multiplication: For any polynomial p(x) = c₁ + c₂x + c3x³ in S and any scalar α ∈ R, the scalar multiple αp(x) = α(c₁ + c₂x + c3x³) is also a polynomial of the same form. Therefore, S is closed under scalar multiplication.
Commutativity of addition: Addition of polynomials is commutative, which means that for any p(x), q(x) ∈ S, p(x) + q(x) = q(x) + p(x).
Associativity of addition: Addition of polynomials is associative, which means that for any p(x), q(x), and r(x) ∈ S, (p(x) + q(x)) + r(x) = p(x) + (q(x) + r(x)).
Existence of additive identity: There exists a polynomial called the zero polynomial, denoted by 0(x), such that for any p(x) ∈ S, p(x) + 0(x) = p(x).
Existence of additive inverse: For every polynomial p(x) ∈ S, there exists a polynomial -p(x) ∈ S such that p(x) + (-p(x)) = 0(x).
Distributivity of scalar multiplication over vector addition: For any scalar α ∈ R and any polynomials p(x), q(x) ∈ S, α(p(x) + q(x)) = αp(x) + αq(x).
Distributivity of scalar multiplication over field addition: For any scalars α, β ∈ R and any polynomial p(x) ∈ S, (α + β)p(x) = αp(x) + βp(x).
Compatibility of scalar multiplication: For any scalars α, β ∈ R and any polynomial p(x) ∈ S, (αβ)p(x) = α(βp(x)).
b) Consider the set U of all polynomials of the form 1 + c₁x + c₂x³ for c₁, c₂ ∈ R. Is U a vector space?
Similar to the previous case, we need to verify whether U satisfies the properties of a vector space.
Closure under addition: For any two polynomials in U, say p(x) = 1 + c₁x + c₂x³ and q(x) = 1 + d1x + d2x³, their sum is r(x) = 2 + (c₁ + d1)x + (c₂ + d2)x³. Since r(x) is also a polynomial of the same form, U is closed under addition.
Closure under scalar multiplication: For any polynomial p(x) = 1 + c₁x + c₂x³ in U and any scalar α ∈ R, the scalar multiple αp(x) = α(1 + c₁x + c₂x³) is also a polynomial of the same form. Therefore, U is closed under scalar multiplication.
Commutativity of addition: Addition of polynomials is commutative, which means that for any p(x), q(x) ∈ U, p(x) + q(x) = q(x) + p(x).
Associativity of addition: Addition of polynomials is associative, which means that for any p(x), q(x), and r(x) ∈ U, (p(x) + q(x)) + r(x) = p(x) + (q(x) + r(x)).
Existence of additive identity: There exists a polynomial called the zero polynomial, denoted by 0(x), such that for any p(x) ∈ U, p(x) + 0(x) = p(x).
Existence of additive inverse: For every polynomial p(x) ∈ U, there exists a polynomial -p(x) ∈ U such that p(x) + (-p(x)) = 0(x).
Distributivity of scalar multiplication over vector addition: For any scalar α ∈ R and any polynomials p(x), q(x) ∈ U, α(p(x) + q(x)) = αp(x) + αq(x).
Distributivity of scalar multiplication over field addition: For any scalars α, β ∈ R and any polynomial p(x) ∈ U, (α + β)p(x) = αp(x) + βp(x).
Compatibility of scalar multiplication: For any scalars α, β ∈ R and any polynomial p(x) ∈ U, (αβ)p(x) = α(βp(x)).
Since U satisfies all of these properties, it is also a vector space over the field of real numbers (R).
To know more about polynomial here
https://brainly.com/question/11536910
#SPJ4
A physical Therapist wants to come the difference to proportion of men and women who participate in regular sustained physical activity What should be obtained if wishes the estimate to be within five percentage points with 90% confidence assuming that
(a) she uses the estimates of 21.7 % male and 18.1% female from a previous year
(b) she does not use any prior estimates?
Answers
a) The Physical Therapist would need to get a sample size of 304 for males and 267 for females, respectively, to estimate the difference in the proportion of men and women using estimates of 21.7% male and 18.1% female from the previous year. b) The Physical Therapist would need to get a sample size of 386 to estimate the difference in the proportion of men and women.
a) In order to find out the difference in the proportion of men and women who participate in regular sustained physical activity, if a Physical Therapist wishes to estimate within five percentage points with 90% confidence and uses the estimates of 21.7 % male and 18.1% female from a previous year, the sample size should be calculated as follows: For male:
Sample size = [z-score(α/2) /E]² × P (1 - P)
Where, z-score(α/2) = 1.645 (for 90% confidence interval)
E = 0.05 (5 percentage points)
P = 0.217 (21.7 % in proportion)
Therefore,Sample size = [1.645/0.05]² × 0.217 × (1 - 0.217)= 303.86≈ 304
For female:
Sample size = [z-score(α/2) /E]² × P (1 - P)
Where, z-score(α/2) = 1.645 (for 90% confidence interval)
E = 0.05 (5 percentage points)
P = 0.181 (18.1 % in proportion)
Therefore, Sample size = [1.645/0.05]² × 0.181 × (1 - 0.181)= 267.07≈ 267
b) If the Physical Therapist does not use any prior estimates, then the worst-case scenario should be considered. The proportion for the worst-case scenario will be 0.5 (50%) because it represents maximum variability. In this case, the sample size will be calculated as follows:
Sample size = [z-score(α/2) /E]² × P (1 - P)
Where, z-score(α/2) = 1.645 (for 90% confidence interval)
E = 0.05 (5 percentage points)
P = 0.5 (50% in proportion)
Therefore, Sample size = [1.645/0.05]² × 0.5 × (1 - 0.5)= 385.6≈ 386
You can learn more about confidence intervals at: brainly.com/question/32546207
#SPJ11
Pls tell me how to work this out
Answers
Answer: 5
Step-by-step explanation: Because this is in parentheseese you start like this. R=1 so 4 x 1 = 4 - 1 = 3 divided by 15 which is 5.
Hope this helps : D
(a) Derive an equation for S, where N(x,t) = f(x - ct) is a solution to the diffusion equation with exponential growth, dN/dt = DdN/dt +9N. (b) Find the minimum wave speed, below which the solutions become complex. For this value of c, find the solutions fle) that are always > 0. (c) Sketch your solution for t = 0, t= 1, 1 = 2.
Answers
In the diffusion equation with exponential growth, we derive an equation for S, where N(x,t) = f(x - ct) is a solution. We then find the minimum wave speed, below which the solutions become complex. For this value of c, we find the solutions that are always greater than zero. Lastly, we sketch the solution for t = 0, t = 1, and t = 2.
(a) To derive an equation for S, we substitute N(x,t) = f(x - ct) into the diffusion equation dN/dt = Dd²N/dx² + 9N. This leads to an equation involving S, c, and f'(x). By solving this equation, we can determine the relationship between S and f'(x).
(b) To find the minimum wave speed, we analyze the equation derived in part (a). The solutions become complex when the coefficient of the imaginary term is nonzero. By setting this coefficient to zero, we can solve for the minimum wave speed c.
For this value of c, we find the solutions f(x) that are always greater than zero. These solutions satisfy certain conditions that ensure positivity. The exact form of these solutions will depend on the specific functional form of f(x).
(c) To sketch the solution, we evaluate the function N(x,t) = f(x - ct) at different values of t, such as t = 0, t = 1, and t = 2. By plotting the resulting curves on a graph, we can visualize the behavior of the solution over time and observe any changes or patterns. The shape and evolution of the curves will depend on the initial function f(x) and the chosen values of c and t.
Learn more about coefficient here:
https://brainly.com/question/1594145
#SPJ11
You want to make a buffer of pH 8.2. The weak base that you want to use has a pKb of 6.3. Is the weak base and its conjugate acid a good choice for this buffer? Why or why not? 3. A weak acid, HA, has a pka of 6.3. Give an example of which Molarities of HA and NaA you could use to make a buffer of pH 7.0.
Answers
This implies that the molarities of [tex]HA[/tex] and [tex]NaA[/tex] should be equal and their value can be any positive value (e.g., 1 M, 0.1 M, etc.) to create a buffer of [tex]pH =7.0.[/tex]
What is conjugate acid?
In chemistry, a conjugate acid refers to the species that is formed when a base accepts a proton (H+) from an acid. When a base accepts a proton, it transforms into its conjugate acid.
To determine if the weak base and its conjugate acid are suitable for a buffer at pH 8.2, we need to compare the pKb and pH values.
If a buffer is to be effective, the pH should be close to the pKa (for an acid) or pKb (for a base) of the weak acid or base, respectively. Additionally, the buffer capacity is highest when the concentrations of the weak acid and its conjugate base are roughly equal.
In this case, we have a weak base with a pKb of 6.3 and a target pH of 8.2. Since pH is inversely related to pOH, we can calculate the pOH as follows:
[tex]\[ pOH = 14 - pH = 14 - 8.2 = 5.8 \][/tex]
To determine if the weak base is suitable for a buffer at pH 8.2, we need to compare the pOH with the pKb. Since pOH is lower than the [tex]pKb (\(5.8 < 6.3\))[/tex], the weak base alone is not an ideal choice for this buffer. The weak base will not be able to sufficiently accept protons to maintain the desired pH of 8.2.
Regarding the second question, to create a buffer of pH 7.0 using a weak acid ([tex]HA[/tex]) with a pKa of 6.3, we need to choose appropriate molarities of HA and its conjugate base ([tex]NaA[/tex]). The Henderson-Hasselbalch equation for a buffer solution is:
[tex]\[ \text{pH} = \text{pKa} + \log\left(\frac{\text{[A^-]}}{\text{[HA]}}\right) \][/tex]
Since we want a pH of 7.0, and the pKa is 6.3, we can set up the equation as follows:
[tex]\[ 7.0 = 6.3 + \log\left(\frac{\text{[A^-]}}{\text{[HA]}}\right) \][/tex]
To find suitable molarities of HA and NaA, we can choose values that satisfy the equation. For example, if we set the ratio of [tex][A^-]/[HA][/tex] as 1, we can calculate the molarities accordingly:
Let's say [tex][A^-] = [HA] = x[/tex] (same molarities).
Substituting the values into the equation:
[tex]\[ 7.0 = 6.3 + \log\left(\frac{x}{x}\right) = 6.3 + \log(1) = 6.3 \][/tex]
This implies that the molarities of HA and NaA should be equal and their value can be any positive value (e.g., 1 M, 0.1 M, etc.) to create a buffer of pH 7.0.
Learn more about conjugate acid:
https://brainly.com/question/31229565
#SPJ4
Solve the problem. The pH of a chemical solution is given by the formula pH = -log10[H] where (H+) is the concentration of hydrogen ions in moles per liter. Find the pH if the [H +1 = 8.6 x 10-3 2.07 2.93 3.93 03.07
Answers
The pH of the chemical solution with a concentration of [H+] = 8.6 x 10^(-3) moles per liter is approximately 2.07. This pH value indicates that the solution is acidic. The formula pH = -log10[H+] is used to calculate the pH value by taking the negative logarithm base 10 of the hydrogen ion concentration.
The pH of a chemical solution is determined using the formula pH = -log10[H+], where [H+] represents the concentration of hydrogen ions in moles per liter.
We have that [H+] = 8.6 x 10^(-3) moles per liter, we can substitute this value into the formula to calculate the pH.
Using a calculator, we evaluate -log10(8.6 x 10^(-3)) to find the pH value. The result is approximately 2.07.
Therefore, the pH of the chemical solution is approximately 2.07.
This pH value indicates that the solution is acidic. On the pH scale, which ranges from 0 to 14, a pH of 7 is considered neutral, values below 7 indicate acidity, and values above 7 indicate alkalinity.
Since the calculated pH is less than 7, we can conclude that the chemical solution is acidic.
In summary, the pH of the chemical solution with a hydrogen ion concentration of 8.6 x 10^(-3) moles per liter is approximately 2.07, indicating an acidic nature.
To know more about hydrogen ion refer here:
https://brainly.com/question/8069088#
#SPJ11
The plot below shows the volume of vinegar used by each of 17 students on there volcano expirement
Answers
The total volume of vinegar in the 4 largest samples would be =32½oz
How to calculate the total volume of the the largest samples?To calculate the total volume of the largest samples, the following steps needs to be taken:
The fours largest samples from the volcano experiments are outlined below as follows:
Sample 1 = 4×1/2= 2
Sample 2 = 1×3= 3
Sample 3 = 5×2½= 12½
Sample 4 = 1×3 = 3
Sample 5 = 4× 3½= 14
The volume of the largest 4 = 3+12½+3+14 = 32½oz
Learn more about volume here:
https://brainly.com/question/27710307
#SPJ1
Complete question:
what is the total volume of vinegar in the 4 largest samples?
All measurements are rounded to the nearest 1/2 fluid ounce.
A parallelogram has four congruent sides. Which name best describes the figure?
A. Parallelogram
B. Rectangle
C. Rhombus
D. Trapezoid
Answers
Answer:
C. Rhombus
Step-by-step explanation:
a Rhombus is a parallelogram with equal side lengths.
Use the fixed point iteration method to lind the root of +-2 in the interval 10, 11 to decimal places. Start with you w Now' attend to find to decimal place Start with er the reception the
Answers
To find the root of ±2 in the interval [10, 11] using the fixed point iteration method, we will define an iterative function and iterate until we achieve the desired decimal accuracy. Starting with an initial approximation of 10, after several iterations, we find that the root is approximately 10.83 to two decimal places.
Let's define the iterative function as follows:
g(x) = x - f(x) / f'(x)
To find the root of ±2, our function will be f(x) = x^2 - 2. Taking the derivative of f(x), we get f'(x) = 2x.
Using the initial approximation x0 = 10, we can iterate using the fixed point iteration formula:
x1 = g(x0)
x2 = g(x1)
x3 = g(x2)
Iterating a few times, we can find the root approximation to two decimal places:
x1 = 10 - (10^2 - 2) / (2 * 10) ≈ 10.1
x2 = 10.1 - (10.1^2 - 2) / (2 * 10.1) ≈ 10.10495
x3 = 10.10495 - (10.10495^2 - 2) / (2 * 10.10495) ≈ 10.10496
Continuing this process, we find that the root is approximately 10.83 to two decimal places.
Learn more about fixed point iteration here: brainly.com/question/32701104
#SPJ11
A rectangle has its base on the x-axis and its upper two vertices on the parabola y= 12 -x^2. What is
the largest area the rectangle can have, and what are its dimensions?
Answers
If rectangle has its base on the x-axis and its upper two vertices on the parabola y= 12 -x², the largest area the rectangle is 32 square units and dimensions are 2 and 8 units.
To find the largest area of the rectangle, we can start by considering the coordinates of the upper two vertices on the parabola y = 12 - x². Let's denote the x-coordinate of one vertex as "a". The corresponding y-coordinate can be found by substituting this value into the equation:
y = 12 - a²
Since the base of the rectangle lies on the x-axis, the length of the base is given by 2a.
Now, let's calculate the area of the rectangle in terms of "a":
Area = base * height = 2a * (12 - a²)
To find the maximum area, we need to take the derivative of the area function with respect to "a" and set it equal to zero:
d(Area)/da = 2(12 - a²) - 2a(2a) = 24 - 2a² - 4a² = 24 - 6a²
Setting this equal to zero:
24 - 6a² = 0
6a² = -24
a² = 4
a = 2
Now,
Area = 2(2)(8)
Area = 4 * 8 = 32
To learn more about rectangle click on,
https://brainly.com/question/29740116
#SPJ4