Please help me! Some people have proposed a new way to build houses in areas that are likely to experience tsunamis. In this design, a house wouldn’t have solid walls on all four sides. Instead, some of the wall areas would be replaced by substances that water can travel through quickly, as shown in the diagram. How would this design help a house survive a tsunami? What drawbacks might there be to this design?

The average momentum of Cart 1 during the entire time shown before the collision is 0.24 kgm/s.

The given parameters:

The average velocity of the cart 1 before collision is calculated as follows;

[tex]v = \frac{\Delta x}{\Delta t} \\\\v = \frac{0.55 - 0.31}{0.5 - 0} \\\\v = 0.48 \ m/s\\\\[/tex]

The average momentum of Cart 1 during the entire time shown before the collision is calculated as follows;

[tex]P = mv\\\\P = 0.5 \times 0.48\\\\P = 0.24 \ kgm/s[/tex]

Learn more about average momentum here: https://brainly.com/question/12979244

In the endothermic reaction, the total energy of water and sodium chloride is greater than the total bond energy of hydrochloric acid and sodium hydroxide.

Endothermic reactions are reactions in which heat energy is absorbed during the reaction. The formation of products by the reactants requires addition of heat because the energy required to form the bond in the products is greater than the energy released when reactant bond are broken.

Thus, in an endothermic reaction, the total bond energy of the products are greater than the bond energy of the reactants.

The properties of endothermic reactions include:

Examples of endothermic reactions include;

The reaction between acids and bases to form salt and water known as neutralization reactions are usually exothermic in nature.

However, if a given reaction between hydrochloric acid and sodium hydroxide to produce water and sodium chloride is endothermic as in the question, the total energy of water and sodium chloride is greater than the total bond energy of hydrochloric acid and sodium hydroxide. ​

Learn more at: https://brainly.com/question/11906094

Learn more at: https://brainly.com/question/6506846

Answer: C.) The total bond energy of water and sodium chloride is greater than the total bond energy of hydrochloric acid and sodium hydroxide.

Hope this helps :)

Answer:A.the Oort cloud

Explanation:

Answer:

try answer A..the Ootor cloud

Answer:

An ammeter has a zero offset error. This fault will affect. neither the precision nor the accuracy of the readings. only the precision of the readings.

The accuracy of the present measurement will be impacted by an ammeter's zero offset inaccuracy, but the precision of the measurement will not change.

Resistance is the obstruction of electrons in an electrically conducting material.

voltage = current ×resistance

How accurate measurement or reading is may be determined by its accuracy. The measurements will be off because of zero inaccuracy.

Thus, The precision of the measurement would not alter if an ammeter made a mistake with its zero offsets, but the accuracy of the current measurement would be decreased.

To learn more about resistance, refer to the link;

brainly.com/question/14547003

#SPJ2

Answer:

What is the atomic number of an atom that has 5 neutrons and 4 electrons? A neutral atom will have the same number of electrons is does protons. Since it has 4 protons, it must have an atomic number of 4. (That makes it beryllium.)

Explanation:

mark me brainliest please and thank you Ma'aM/Sir

Answer:

4 protons, 5 neutrons, and 4 electrons are there in an atom of beryllium.

Answer:

Explanation:

If we ASSUME that a CCW torque is positive

τ = 10sin135[8.0] - 16sin90[4.0] + 19sin160[3.0] = 12 N•m

as the result is positive, the net torque is CCW.

The mass of block 1 will be 1.99 kg.The tension force is applied along the whole length of the wire, pulling energy equally on both ends.

The tension force is described as the force transferred through a rope, string, or wire as it is pulled by opposing forces.

Given that,

Mass of block 1=? kg

The coefficient of the kinetic friction,μ=0.200

Now consider the weight component in the uphill direction.The weight is found as;

[tex]\rm W=m_1gsin \theta[/tex]

The force is balanced in the vertical direction as;

[tex]\rm T=F_f-W[/tex]

When the force of friction is;

[tex]\rm F_F=\mu_k N[/tex]

[tex]\rm F_f=(m_1 gcos \theta)[/tex]

Substitute the value in the vertical balanced equation;

[tex]\rm T=m_1gsin(27.5)^0-\mu_kmgcos27.5^0[/tex]

[tex]\rm T-m_2g=0\\\\T=m_2g[/tex]

[tex]\rm (10.1) g=m_1g(0.699-0.2 \times(-0.714) ) \\\\ (10.1) g=m_1g (0.699+0.1428) \\\\\ (10.1) g= m_1 \times 0.8418 \\\\ m_1 =11.99 \ kg[/tex]

Hence the mass of block 1 will be 1.99 kg.

To learn more about the tension force refer to the link;

https://brainly.com/question/2287912

#SPJ2

Answer:

Explanation:

Conservation of momentum

a) the man and skateboard move to the right.

b) His speed depends on the reference frame of the ball speed.

If the speed of the ball is 10 m/s relative to ground and the man's final speed is v, then.

(75 + 20)(0) = 20(10) + 75(v)

v = -200/75 = -2.6666...

|v| = 2.7 m/s relative to the ground

This is the likely answer they are seeking.

If the ball is thrown with a speed of 10 m/s relative to the man

(70 + 20)(0) = 20(v + 10) + 75v

20v + 200 = - 75v

          200 = - 95v

               v = -2.105... m/s velocity or a speed of

              |v| = 2.1 m/s relative to ground

and the ball has a velocity of 10 - 2.1 = 7.9 m/s relative to ground.

Answer:

Allah asked Abraham(Ibrahim)

A conjugate acid is formed from the base  by accepting a proton from the acid .

A conjugate base is obtained from the Brownstead - Lowry acid when it looses a proton while the conjugate acid is obtained from the Brownstead - Lowry base when it accepts a proton. In the Brownstead - Lowry sense, acid base reaction involves the loss or gain of a proton.

Consider the hypothetical reaction; AH + :B ⇄ BH + :A. The specie BH is the conjugate acid while the specie  :B is the  Brownstead - Lowry base . The specie :A is the conjugate base while the specie AH is the  Brownstead - Lowry acid.

Learn more about conjugate acid: https://brainly.com/question/10468518

Answer:

D) 8

Explanation:

Due to the octet rule the most stable atoms will have 8 valence electrons.

Answer:

the plot is about a crocodile who lives in a river.....

Explanation:

It is about a crocodile who lives in a river. He becomes friends with a monkey that lives on a tree on the river bank. Consequently, the monkey shares the fruits of the tree with his friend, the crocodile. Further, the crocodile takes a share for his wife.

[tex]\huge\color{pink}\boxed{\colorbox{black}{Answer ☘}}[/tex]

12 mC

We are given that...

[tex]C_{1} = 4mF \\ V_{1} = 50v \\ C_{2} = 6mF \\ V_{2} = 30v \\ \\ we've \: to \: find \: the \: final \: charge \: on \: the \: 6mF \\capacitor \:- \\ \\ we \: know \: that ,\: \\ Q = CV \\ \\ using \: the \: formula \: \\ Q_{1} = 4 \times 50 = 200mC \\ Q_{2} = 6 \times 30 = 180mC \\ \\ total \: charge , \: Q_{1} - Q_{2} = 200 - 180 = 20mC \\ \\ let \: V \: be \: the \: final \: potential \: \\ 4V + 6V = 20mC\\ 10V = 20mC \\ V = \frac{20}{10} = 2V \\ final \: charge \: Q = CV = 6 \times 2 = 12mC[/tex]

therefore,

hope helpful~

The initial temperature of the metal bolt is 80.8 °C

We'll begin by calculating the heat absorbed by the water.

Q = MCΔT

Q = 0.15 × 4184 × 4

Q = 2510.4 J

Finally, we shall determine the initial temperature of the metal bolt.

Q = MC(T₂ – T₁)

–2510.4 = 0.050 × 899 (25 – T₁)

–2510.4 = 44.95 (25 – T₁)

Clear bracket

–2510.4 = 1123.75 – 44.95T₁

Collect like terms

–2510.4 – 1123.75 = –44.95T₁

–3634.15 = –44.95T₁

Divide both side by –44.95

T₁ = –3634.15 / –44.95

T₁ = 80.8 °C

Thus, the initial temperature of the metal is 80.8 °C.

Learn more about heat tranfer:

https://brainly.com/question/26034272

The total charge in this time is equal to 144 Coulomb.

Given the following data:

To calculate the total charge in this time:

First of all, we would convert the value of time in minutes to seconds.

Conversion:

1 minute = 60 seconds

3 minutes = 180 seconds

Mathematically, the quantity of charge is given by this formula:

[tex]Q=It[/tex]

Where:

Substituting the given parameters into the formula, we have;

[tex]Q = 0.8 \times 180[/tex]

Quantity of charge, Q = 144 Coulomb.

Read more on charges here: https://brainly.com/question/4313738

Answer:

960 watts

Explanation:

The muzzle speed of the bullet before the collision is 415.3 m/s.

The given parameters:

Apply the principle of work-energy theorem to determine the final velocity of the block-bullet system;

[tex]F_f \times d = \frac{1}{2} mv^2\\\\\mu_k F_n \times d = \frac{1}{2} mv^2\\\\\mu_ k (m_1 + m_2)g \times d = \frac{1}{2} (m_1 + m_2)v^2\\\\\mu_k g \times d= \frac{1}{2} v^2\\\\2\mu _k gd = v^2\\\\v= \sqrt{2\mu _k gd } \\\\v = \sqrt{2 \times 0.23 \times 9.8 \times 9.5} \\\\v = 6.54 \ m/s[/tex]

Apply the principle of conservation of linear momentum to determine the muzzle speed of the bullet;

[tex]m_1 u_1 \ + \ m_2u_2 = v(m_1 + m_2)\\\\0.024(u_1) \ + \ 1.5(0) = 6.54(0.024 + 1.5)\\\\0.024u_1 = 9.967\\\\u_1 = \frac{9.967}{0.024} \\\\u_1 = 415.3 \ m/s[/tex]

Thus, the muzzle speed of the bullet before the collision is 415.3 m/s.

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

Answer:

Iron(III) nitrate

Explanation:

Answer:i am pro

kExplanation:

Answer:

The movement of Tectonic plates.

Explanation:

Answer:

I think the answer is goat

Answer:

Cake Crunch (Enriched Wheat Flour [Bleached Flour, Niacin, Reduced Iron, Thiamine Mononitrate, Riboflavin, Folic Acid]), Sugar, Vegetable Shortening [Partially Hydrogenated Soybean and Cottonseed Oil], Salt, Sodium Bicarbonate, Artificial Flavor, Soy Lecithin, Soybean Oil, Coconut Oil, Sugar, Chocolate Liquor, ...

The change in the Gibb's free energy per mole (G) is 1.96 J.

The given parameters:

The change in the Gibb's free energy per mole (G) is calculated as follows;

[tex]\Delta G = V(P_2-P_1) \\\\[/tex]

where;

V is the volume of the ice

[tex]Density = \frac{Mass}{Volume} \\\\Volume = \frac{Mass}{Density} \\\\Volume = \frac{18 \times 10^{-3} \ kg}{917 \ m^3} \\\\Volume = 1.96 \times 10^{-5} \ m^3\\\\Volume = 1.96 \times 10^{-5} \ m^3 \times \frac{1000 \ L}{m^3} \\\\Volume = 0.0196 \ L[/tex]

Change in pressure;

[tex]P_2 - P_1 = 2.0 \ bar \ - \ 1.0 \ bar = 1.0 \ bar = 0.987 \ atm[/tex]

The change in the Gibb's free energy per mole (G);

[tex]\Delta G= V(P_2-P_1)\\\\\Delta G = 0.0196\ L \times 0.987\ atm \\\\\Delta G = 0.0193 \ L.atm\\\\1 \ L.atm = 101.325 \ J\\\\\Delta G = 0.0193 \ L.atm \times \frac{101.325 \ J}{1 \ L.atm} \\\\\Delta G = 1.96 \ J[/tex]

Thus, the change in the Gibb's free energy per mole (G) is 1.96 J.

Learn more about Gibb's free energy here: https://brainly.com/question/10012881

Answer:

Earth's magnetic field (and the surface magnetic field) is approximately a magnetic dipole, with the magnetic field S pole near the Earth's geographic north pole (see Magnetic North Pole) and the other magnetic field N pole near the Earth's geographic south pole (see Magnetic South Pole). This makes the compass usable for navigation. The cause of the field can be explained by dynamo theory. A magnetic field extends infinitely, though it weakens with distance from its source. The Earth's magnetic field, also called the geomagnetic field, which effectively extends several tens of thousands of kilometres into space, forms the Earth's magnetosphere. A paleomagnetic study of Australian red dacite and pillow basalt has estimated the magnetic field to be at least 3.5 billion years old

Answer:

Explanation:

Near the earth's surface where gravity is approximately 10 m/s² downward

v = u + at

v = 5 + (-10)(1) = -5 m/s

so it has the same speed but in the opposite (downward) direction.

The instantaneous velocity of the object is -4.8 m/s and is directed downwards.

Instantaneous velocity is defined as the rate of change of position for a given interval of time. And it also represents the direction.

Here,

The object is freely falling.

So, the acceleration of the object is the acceleration due to gravity.

a = g = 9.8 m/s²

Initial velocity of the object, u = 5 m/s  (upward velocity)

Time given, t = 1

Using the first equation of motion,

v = u + at

v = 5 + (-9.8) x 1  

( negative sign is due to it is directed downwards which is opposite to u)

v = -4.8 m/s

That means the instantaneous velocity is directed downwards.

Hence,

The instantaneous velocity of the object is -4.8 m/s and is directed downwards.

To learn more about instantaneous velocity, click:

https://brainly.com/question/2273637

#SPJ3

The amount of work done by the hairdryer is equal to 450 Kilojoules.

Given the following data:

To determine the amount of work done by the hairdryer:

Mathematically, the work done by an object with respect to power and time is given by the formula:

[tex]Work\;done = power \times time[/tex]

Substituting the given parameters into the formula, we have;

[tex]Work\;done = 750 \times 600[/tex]

Work done = 450,000 Joules

Note: 1000 Joules = 1 Kilojoules.

Work done = 450 Kilojoules.

Read more: https://brainly.com/question/13818347

Answer:

Explanation:

For an ideal spring over a frictionless horizontal surface, stored energy is only a function of the spring constant k and the distance of compression. The mass of the block doing the compressing is irrelevant

Energy stored in the first example is

Em = ½kd²

Energy stored in the second example is

E₂m = ½k(2d)² = 4(½kd²) = 4Em

So the second situation has four times as much stored spring potential energy as the first situation

4 Em is correct

Good job!

Answer:

3,958.8 mi

Explanation:

The value of the current in each arm of the circuit is given by Kirchhoff's

Rules.

Reasons:

By Kirchhoff's junction rule, we have that the sum of current at a junction is given as follows;

Which by the direction of the currents in the given circuit diagram, we have;

Therefore;

I₁ = I₃ + I₂

According to Kirchhoff's loop rule theory, we have;

In the loop having the 2 Volts emf., we have;

-I₃·R₁ + 2 + I₂·R₂ = 0

I₃ = 1.17 A

R₁ = 2 Ω

R₂ = 2 Ω

Which gives;

-1.17 × 2 + 2 + I₂×2 = 0

I₂ × 2 = 2.34 - 2 = 0.34

I₂ = 0.34 ÷ 2 = 0.17

I₂ = 0.17 A

From the loop having the 7 Volts emf. we have;

7 - 0.17×2 - I₁ × 4 - I₁ × 1 = 0

Which gives;

7 - 0.34 - 5·I₁ = 0

5·I₁ = 7 - 0.34 = 6.66

I₁ = 6.66 ÷ 5 = 1.332

Therefore;

Learn more about electric circuits here:

https://brainly.com/question/2608877

Answer:

The first one is the only one that is true all the time

Explanation:

The second one may be true if friction is high enough.

The other three are false all the time