Please help answer the question

The plates are charged to 1.593 10-9 C.

Calculation-

A parallel-plate capacitor's capacitance is determined by:

C = ∈0 A / d

where A is the area of the plates, d is the distance between them, and 0 is the electric constant, also referred to as the permittivity of empty space.

Inputting the values provided yields:

C = (8.85 × [tex]10^-12[/tex] F/m) * 1.5 × [tex]10^-4[/tex] [tex]m^2 / (1.00 × 10^-3 m) = 1.3275 × 10^-10 F[/tex]

Charges are placed on the plates by:

Q = CV

V stands for the voltage applied across the plates. Inputting the values provided yields:

[tex]Q = (1.3275 × 10^-10 F) * 12 V = 1.593 × 10^-9 C[/tex]

to know more about capacitors here:

brainly.com/question/17176550

#SPJ1

The angular width of the light ray inside the fused quartz is 52.4°.

What is angular width?

Angular width is the measure of the size or extent of an object or phenomenon as it appears to an observer, expressed in angular units (such as degrees). It is the angle subtended by the object or phenomenon at the observer's eye. In optics, angular width is often used to describe the apparent size of an object or image viewed through a lens or other optical instrument.

The angular width of the light ray inside the fused quartz can be found using the formula:

θ2 = [tex]Sin^{-1}(n2/n1 * sin(θ1))[/tex]

where θ1 is the angle of incidence, n1 is the refractive index of the medium outside the quartz (assumed to be air, which has a refractive index of 1), n2 is the refractive index of the quartz, and θ2 is the angle of refraction.

To find θ2, we need to first find the average refractive index of the quartz for the narrow white light ray. We can use the formula:

[tex]n_{avg}[/tex] = ([tex]n_{blue}[/tex] + [tex]n_{red}[/tex]) / 2

where n_blue is the refractive index for blue light (400 nm) and n_red is the refractive index for red light (700 nm).

[tex]n_{avg}[/tex] = (1.47 + 1.458) / 2 = 1.464

Now we can plug in the values and solve for θ2:

θ2 = [tex]Sin^{-1}(1.464/1 * sin(39.1°))[/tex] = 52.4°

Therefore, the angular width of the light ray inside the fused quartz is 52.4°.

To know more about angular width, visit:

https://brainly.com/question/28202134

#SPJ9

The self-weight of the reinforced concrete beam is 0.024 X Y X 2000 kN.

A reinforced concrete beam is a structural element designed to withstand the load of a building or other construction. It is made by pouring concrete into a mold or form, and then reinforcing the concrete with steel bars or other reinforcement materials. Reinforced concrete beams are commonly used in the construction of buildings, bridges, and other infrastructure, and can be designed to support a variety of loads and spans.

To calculate the self-weight of the reinforced concrete beam, we first need to determine the volume of the beam, which can be calculated as:

Volume of beam = breadth x depth x length

Substituting the given values, we get:

Volume of beam = Xmm x Ymm x 2000mm

Next, we need to calculate the weight of this volume of concrete, which can be calculated as:

Weight of concrete = Volume of beam x Unit weight of concrete

Substituting the given value of the unit weight of concrete as 24kN/mm³, we get:

Weight of concrete = Xmm x Ymm x 2000mm x 24kN/mm³

Simplifying this expression, we get:

Weight of concrete = 0.024 X Y X 2000 kN

Therefore, the self-weight of the reinforced concrete beam is 0.024 X Y X 2000 kN.

Learn more about concrete here:

https://brainly.com/question/28903866

#SPJ9

The orbital period of an exoplanet using a light curve is calculated using the length of time between each dip in the light curve, represented by a line that drops below the normal light intensity.

Planet | Mass of parent star (relative to sun) | Orbital Period (days) | Distance from parent star (AU) | Distance from parent star (km)

Kepler-5b | 1.37 Ms | 3.55 | 0.05064 | 7,580,000

Kepler-6b | 1.21 Ms | 3.23 | 0.04559 | 6,820,000

Kepler-7b | 1.36 Ms | 4.89 | 0.06250 | 9,350,000

Kepler-8b | 1.21 Ms | 3.52 | 0.04828 | 7,220,000

Kepler-9b | 1.04 Ms | 384.84 | 1.046 | 156,500,000

Read more about Kepler's third law here:

https://brainly.com/question/16705471

#SPJ1

Mass is a measure of the amount of matter in an object and is a fundamental property of matter. Fundamental forces refer to the interactions between particles, whereas fundamental particles are the building blocks of matter.

Mass is a measure of the amount of matter in an object, usually measured in kilograms (kg). It is a fundamental property of matter that does not change with location or gravitational forces.

Two differences between fundamental forces and fundamental particles are:

1. Fundamental forces refer to the interactions between particles, whereas fundamental particles are the building blocks of matter that makeup everything in the universe.

2. There are four fundamental forces - gravitational, electromagnetic, weak nuclear, and strong nuclear - while there are six types of fundamental particles - quarks, leptons, bosons, neutrinos, antimatter particles, and Higgs bosons.

Therefore,A fundamental characteristic of matter is mass, which is a measurement of how much matter there is in an item. Fundamental particles are the building components of matter, whereas fundamental forces relate to the interactions between particles.

To learn more about the Higgs boson  click:

https://brainly.com/question/31640044

#SPJ1

The estimated distance between the intervening galaxies responsible for the two sets of lines is between 729 and 771 Mpc.

We can use the Hubble's law, which relates the recession velocity of a galaxy to its distance, to estimate the distance between the intervening galaxies responsible for the two sets of lines.

The Hubble's law is given by:

v = H0 × d

where v is the recession velocity of the galaxy, d is the distance to the galaxy, and H0 is the Hubble constant.

We are given that the quasar has a redshift of 0.20, which corresponds to a recession velocity of:

v = z × c

where z is the redshift and c is the speed of light. Substituting the given values, we get:

v = 0.20 × 3 × 10^5 km/s = 60,000 km/s

We are also given that the two sets of absorption lines are redshifted by 0.17 and 0.180, respectively. This means that the intervening galaxies responsible for the absorption lines are receding away from us at velocities of:

v1 = z1 × c = 0.17 × 3 × 10^5 km/s = 51,000 km/s

v2 = z2 × c = 0.180 × 3 × 10^5 km/s = 54,000 km/s

Using the Hubble's law, we can estimate the distances to the galaxies:

d1 = v1 / H0 = 51,000 km/s / 70 km/s/Mpc = 729 Mpc

d2 = v2 / H0 = 54,000 km/s / 70 km/s/Mpc = 771 Mpc

Learn more about Hubble law:https://brainly.com/question/13705068

#SPJ1

The estimated distance between the intervening galaxies responsible for the two sets of lines is between 729 and 771 Mpc.

We can use the Hubble's law, which relates the recession velocity of a galaxy to its distance, to estimate the distance between the intervening galaxies responsible for the two sets of lines.

The Hubble's law is given by:

v = H0 × d

where v is the recession velocity of the galaxy, d is the distance to the galaxy, and H0 is the Hubble constant.

We are given that the quasar has a redshift of 0.20, which corresponds to a recession velocity of:

v = z × c

where z is the redshift and c is the speed of light. Substituting the given values, we get:

v = 0.20 × 3 × 10^5 km/s = 60,000 km/s

We are also given that the two sets of absorption lines are redshifted by 0.17 and 0.180, respectively. This means that the intervening galaxies responsible for the absorption lines are receding away from us at velocities of:

v1 = z1 × c = 0.17 × 3 × 10^5 km/s = 51,000 km/s

v2 = z2 × c = 0.180 × 3 × 10^5 km/s = 54,000 km/s

Using the Hubble's law, we can estimate the distances to the galaxies:

d1 = v1 / H0 = 51,000 km/s / 70 km/s/Mpc = 729 Mpc

d2 = v2 / H0 = 54,000 km/s / 70 km/s/Mpc = 771 Mpc

Learn more about Hubble law:https://brainly.com/question/13705068

#SPJ1

In the case of two superimposed mirrors, the virtual image will be a reflection of the original object, with the angle between the object and its virtual image depending on the angle between the mirrors.

If you are referring to two superimposed mirrors with an angle of 110° between them, and sunlight is striking the first mirror at an angle of 60°, then you might be looking to calculate the angle of reflection.

The angle of incidence is equal to the angle of reflection. In this case, the angle of incidence, a, is 60°, so the angle of reflection will also be 60°. However, this angle is measured with respect to the normal (a perpendicular line to the mirror's surface), not with respect to the mirror itself.

The difference between thinking in the mirror might refer to the virtual image created by the mirror. In the case of two superimposed mirrors, the virtual image will be a reflection of the original object, with the angle between the object and its virtual image depending on the angle between the mirrors.

Read more about mirrors here:

https://brainly.com/question/1126858

#SPJ1

3000 volts are required to move a current of 3 A through a resistor of 1000 Ohms.

Ohm's law states that the voltage across a conductor is directly proportional to the current flowing through it, given a constant temperature and other conditions. The relationship between voltage, current, and resistance is expressed mathematically as V = IR, where V is the voltage across the conductor, I is the current flowing through it, and R is the resistance of the conductor.

Using Ohm's law, we can find the voltage required to move a current of 3 A through a resistor of 1000 Ohms:

V = I * R

where V is the voltage, I is the current, and R is the resistance.

Substituting the given values, we get:

V = 3 A * 1000 Ohms = 3000 volts

To know more about resistor, here

brainly.com/question/17390255

#SPJ1

In order to produce the C5 note, the length of the one-inch PVC pipe should be cut to approximately 12.91 inches.

The formula to calculate the length of a pipe to produce a desired frequency is:

L = (v/2f) * n

Where:

To find the length of the pipe needed to produce the C5 note with a frequency of 523.25 Hz, we can use the formula above and assume the fundamental frequency (n = 1):

L = (v/2f) * n = (343 m/s / 2 * 523.25 Hz) * 1

L = 0.3279 meters or 12.91 inches

Therefore, the length of the one-inch PVC pipe should be cut to approximately 12.91 inches to produce the C5 note.

More on length and frequency can be found here: https://brainly.com/question/17193369

#SPJ1

The rate of radiation emitted by an identical surface at 54°C is 2,170,812.96 W. This is significantly higher than the rate of radiation emitted by the surface at 27°C, which was 100 W.

The Stefan-Boltzmann Law states that the rate of radiation emitted by a blackbody is proportional to the fourth power of its absolute temperature.

The rate of radiation emitted by an identical surface at 54°C can be found using the Stefan-Boltzmann Law.

Therefore, we can calculate the rate of radiation emitted by the surface at 54°C using the following equation:

Power emitted = σ x (Temperature)⁴

Where σ is the Stefan-Boltzmann constant, which is equal to 5.67 x 10⁻⁸ Wm⁻²K⁻⁴.

Plugging in the given values, we have:

Power emitted = 5.67 x 10⁻⁸ Wm⁻²K⁻⁴ x (54 + 273)⁴

Power emitted = 2,170,812.96 W

Therefore, the rate of radiation emitted by an identical surface at 54°C is 2,170,812.96 W. This is significantly higher than the rate of radiation emitted by the surface at 27°C, which was 100 W. This is due to the fact that the fourth power of the absolute temperature of the surface is much higher at 54°C than at 27°C.

For more questions related to radiation

https://brainly.com/question/893656

#SPJ1

The rate of radiation emitted by an identical surface at 54°C is 2,170,812.96 W. This is significantly higher than the rate of radiation emitted by the surface at 27°C, which was 100 W.

The Stefan-Boltzmann Law states that the rate of radiation emitted by a blackbody is proportional to the fourth power of its absolute temperature.

The rate of radiation emitted by an identical surface at 54°C can be found using the Stefan-Boltzmann Law.

Therefore, we can calculate the rate of radiation emitted by the surface at 54°C using the following equation:

Power emitted = σ x (Temperature)⁴

Where σ is the Stefan-Boltzmann constant, which is equal to 5.67 x 10⁻⁸ Wm⁻²K⁻⁴.

Plugging in the given values, we have:

Power emitted = 5.67 x 10⁻⁸ Wm⁻²K⁻⁴ x (54 + 273)⁴

Power emitted = 2,170,812.96 W

Therefore, the rate of radiation emitted by an identical surface at 54°C is 2,170,812.96 W. This is significantly higher than the rate of radiation emitted by the surface at 27°C, which was 100 W. This is due to the fact that the fourth power of the absolute temperature of the surface is much higher at 54°C than at 27°C.

For more questions related to radiation

https://brainly.com/question/893656

#SPJ1

The 4.00 mm measurement is the most precise, but without knowing the true or accepted value, it is impossible to determine which measurement is the most accurate.

Precision refers to how close repeated measurements are to each other, while accuracy refers to how close a measured value is to the true or accepted value.

A 4.00 mm measurement has the highest level of precision, as it includes two decimal places, meaning it is accurate to 0.01 mm. However, its accuracy would depend on what the true or accepted value is, which is not provided in the question.

A 4.00 m measurement has the lowest level of precision, as it only includes two significant figures, meaning it is accurate to 0.01 m. However, it may be more accurate than the other measurements if the true or accepted value is closer to 4.00 m than to the other values.

A 40.00 m measurement has the same level of precision as the 4.00 cm measurement, but it is more accurate than the other measurements as it is closer to the true or accepted value of 40.00 m.

Learn more about measurements at

https://brainly.com/question/27233632

#SPJ1

The number of cans would be approximately 5 cans

The energy required to bring a certain amount of water to a boil can be calculated using the specific heat capacity of water, which is 4.184 J/g°C. The energy required to raise the temperature of one gram of water by one degree Celsius is 4.184 J.

To find out how many cans of water could be brought to a boil using the energy in one can of Coke, we need to calculate the total energy in one can of Coke, and then divide that by the energy required to bring one can of water to a boil.

First, let's convert the volume of the can from milliliters to liters:

355 mL = 0.355 L

The mass of the Coke in the can can be found using its density, which is approximately 1 g/mL:

mass = volume x density = 0.355 L x 1 g/mL = 0.355 kg

The energy in the can of Coke can be calculated using the number of food calories it contains:

energy = 140 food calories x 1000 cal/kcal x 4.184 J/cal = 585,760 J

To find out how many cans of water could be brought to a boil using this energy, we need to calculate the energy required to bring one can of water to a boil:

energy required = mass x specific heat capacity x temperature change

For one can of water, the mass is:

mass = volume x density = 0.355 L x 1000 g/L = 355 g

The temperature change required to bring the water to a boil from room temperature (20°C) is:

temperature change = boiling point of water - room temperature = 100°C - 20°C = 80°C

Therefore, the energy required to bring one can of water to a boil is:

energy required = 355 g x 4.184 J/g°C x 80°C = 118,782 J

Finally, we can find out how many cans of water could be brought to a boil using the energy in one can of Coke:

number of cans of water = energy in Coke / energy required per can of water

number of cans of water = 585,760 J / 118,782 J = 4.93

Read more on density here:https://brainly.com/question/1354972

#SPJ1

The cross-sectional area of this tungsten wire filament is 6.544 x 10⁻⁹m² and the power of this lightbulb when it is being operated at a potential difference of 120 volts is 60 watts.

The amount that a substance or a device obstructs the passage of an electric current is known as its resistance. It is described as the proportion of the voltage across a conductor to the current flowing through it.

The resistance formula may be used to get the tungsten wire filament's cross-sectional area:

R = (ρ * L) / A

where R is the resistance, is the tungsten's resistivity, L is the wire's length, and A is its cross-sectional area.

The resistance of the wire is 19 ohms at 20 °C. To find A, we can rearrange the equations as follows:

A = (ρ * L) / R

Inputting the values results in:

A = (5.6 x 10^-8 Ωm * 0.22 m) / 19 Ω

A = 6.544 x 10^-9 m^2

The tungsten wire filament's cross-sectional area is 6.544 x 10^-9 m^2, as a result.

The power formula may be used to determine the lightbulb's power:

P = V^2 / R

where P denotes power, V denotes potential difference, and R denotes resistance of the tungsten wire filament at 120 volts.

The wire's resistance at 120 volts is 240 ohms. Inputting the values results in:

P = (120 V)^2 / 240 Ω 

P = 60 W

Therefore, while the lightbulb is operating at a 120 volt potential difference, its output is 60 watts.

To know more about resistance, visit:

https://brainly.com/question/29427458

#SPJ9

The work done on the bike and girl is -954.67 Joules.

To find the work done on the bike and the girl, we can use the work-energy principle, which states that the work done on an object is equal to its change in kinetic energy.

The initial kinetic energy of the bike and girl is given by:

KEi = 1/2 * m * v²

where m is the mass and v is the velocity

KEi = 1/2 * 26 kg * (6.64 m/s)²

KEi = 954.67 J

The final kinetic energy of the bike and girl is zero, since they come to a stop. Therefore, the change in kinetic energy is:

ΔKE = KEf - KEi = -KEi

The work done on the bike and girl is equal to the negative of the initial kinetic energy:

W = -KEi

W = -954.67 J

To know more about work done, here

brainly.com/question/31506558

#SPJ1

The correct options for how thermal energy is transferred during conduction are " Thermal energy is transferred between particles that are in direct contact with each other.", "Thermal energy is transferred between objects of different temperatures.", and "Thermal energy is transferred from fast-moving particles to slow-moving particles." The correct options are B, C, and F.

During conduction, thermal energy is transferred through a material or between objects in direct contact with each other. The transfer of thermal energy occurs because of temperature differences between the two objects or regions. When two objects at different temperatures are in direct contact with each other, the hot object transfers thermal energy to the cold object through collisions between the particles of the two objects. The fast-moving particles in the hot object collide with the slow-moving particles in the cold object, transferring thermal energy from the hot object to the cold object. This process continues until the two objects reach thermal equilibrium, meaning they have the same temperature and there is no more net transfer of thermal energy between them.

Option A is not true because thermal energy is actually transferred between particles that are in direct contact with each other, not particles that are not touching each other.

Option D is not true because thermal energy does not transfer between objects that are already at the same temperature. Heat transfer only occurs when there is a temperature difference.

Option E is not true because thermal energy actually flows from hot objects to cold objects. Therefore, thermal energy is transferred from fast-moving particles to slow-moving particles, not the other way around.

Therefore, The correct answers are  B, C, and F.

To learn more about  the difference between conduction and convection click:

https://brainly.com/question/13104912

#SPJ1

Answer:

The Canis Major Dwarf galaxy is currently being absorbed by the Milky Way galaxy. The gravitational pull of the Milky Way is slowly pulling the Canis Major Dwarf galaxy apart and incorporating its stars into the Milky Way. This process is expected to continue for several billion years until the Canis Major Dwarf galaxy is completely assimilated by the Milky Way.

Answer:

(a) To find the tension in the cord when the stretch is 16.7 m, we need to first determine which spring constant applies to this stretch. Since 16.7 m is greater than 4.88 m, the spring constant for x ≥ 4.88 m applies, which is

�

2

=

111

�

/

�

k

2

=111N/m.

Next, we need to find the force exerted by the bungee cord at this stretch. The force F(x) exerted by a spring is given by:

F(x) = kx

where k is the spring constant and x is the stretch. Plugging in the values for k and x, we get:

F(16.7) = (111 N/m)(16.7 m) = 1853.7 N

Therefore, the tension in the cord when the stretch is 16.7 m is 1853.7 N.

(b) To find the work done against the elastic force of the bungee cord to stretch it 16.7 m, we need to integrate the force over the stretch. Since the spring constant changes at 4.88 m, we need to break up the integration into two parts.

For 0 ≤ x ≤ 4.88 m, the force is given by:

F(x) = k

1

x

where k

1

= 204 N/m. Integrating this expression over the stretch from 0 to 4.88 m, we get:

W

1

= ∫

4.88

0

k

1

x dx = (204 N/m) * (4.88 m)

2

/ 2 = 996.8 J

For 4.88 m ≤ x ≤ 16.7 m, the force is given by:

F(x) = k

2

x

where k

2

= 111 N/m. Integrating this expression over the stretch from 4.88 m to 16.7 m, we get:

W

2

= ∫

16.7

4.88

k

2

x dx = (111 N/m) * (16.7 m)

2

/ 2 - (111 N/m) * (4.88 m)

2

/ 2 = 1232.8 J

Therefore, the total work done against the elastic force of the bungee cord to stretch it 16.7 m is:

W = W

1

+ W

2

= 996.8 J + 1232.8 J = 2229.6 J

To solve this problem, we need to use Einstein's famous equation, E=mc^2, which relates energy and mass. Mass is a E= mc2 answer is 4.86×10^54 kg.

Consumers are an important part of food chains and food webs in ecosystems, as they help to transfer energy and nutrients between different levels of the food chain. Without consumers, the energy stored in plants and other producers would not be available to other organisms in the ecosystem, which could have significant impacts on the overall health and functioning of the ecosystem.

An ecosystem refers to a community of living organisms and their physical environment interacting as a system. It can be a small area, such as a pond or a forest, or a larger area, such as a desert or an ocean.

To know more about consumer visit :

https://brainly.com/question/15869639

#SPJ1

The electrical signals sent to the brain indicate the loudness, pitch, and quality of a sound wave.

Option A is correct

An electrical signal is described as a voltage or current which conveys information, usually it means a voltage. It is the term can be used for any voltage or current in a circuit.

The apparent strength of a sound wave is referred to as loudness, and it is commonly expressed in decibels. (dB). The perceived sound is louder the larger the amplitude of the sound wave.

The apparent highness or lowness of a sound is known as pitch, and it is based on the sound wave's frequency. When compared to lower frequency sound waves, higher frequency sound waves are perceived as having a higher pitch.

Learn more about electrical signal at: https://brainly.com/question/16783396

#SPJ1

Acceleration of approximately 0.023 m/s² would be required to reach the halfway point and then decelerate to arrive at Alpha Centauri in 400 years.

Acceleration is the amount at which the velocity of an object changes over time. An object can accelerate by changing its speed, direction of motion, or both.

The required acceleration can be calculated using the formula:

a = (2d) / (t²)

where:

d = distance to be covered (half the distance to Alpha Centauri in this case, which is 2.1 light years or 1.989 x 10¹³ km)

t = time taken to complete the trip (400 years or 1.26 x 10¹⁰ seconds)

Plugging in the values, we get:

a = (2 x 1.989 x 10¹³) / (1.26 x 10¹⁰)²

a ≈ 0.023 m/s²

Therefore, an acceleration of approximately 0.023 m/s² would be required to reach the halfway point and then decelerate to arrive at Alpha Centauri in 400 years.

To know more about acceleration, click here

https://brainly.com/question/11936480

#SPJ1

Torque is a measure of the force that can cause an object to rotate about an axis. (answer taken from Khan Academy).

The  mass of the parent galaxy is 3.42 x 10^12 solar masses assuming H0 = 70 km/s/Mpc.

the equation for the mass of a galaxy is :

M = (v^2 * r) / G

H0 = 70 km/s/Mpc

v_satellite = 6450 km/s

v_parent = 6500 km/s

We apply the  equation for the Hubble law, in order to find the distances to the galaxies:

d_satellite = v_satellite / H0 = 92.1 Mpc

d_parent = v_parent / H0 = 92.9 Mpc

θ = 0.1∘

d = d_satellite * (θ/60) = 0.026 Mpc

We have the equation for the mass of the parent galaxy as :

M = (v^2 * r) / G

M = (6500 km/s)^2 * (0.026 Mpc) / G = 3.42 x 10^12 solar masses

Learn more about the Hubble law at: https://brainly.com/question/29869676

#SPJ1

The following statement is NOT an example of a heteronormative society, Asking a heterosexual person "when did you know you were straight?" Option d is correct.

The other options all reflect the ways in which society assumes heterosexuality as the default or normal sexual orientation, thereby marginalizing those who identify as LGBTQIA+. For example, asking a homosexual person "when did you know you were gay?" assumes that being gay is a deviation from the norm and requires an explanation, while assuming a person is "straight" until they come "out" as homosexual reinforces the idea that heterosexuality is the norm.

Similarly, the portrayal of most couples in the media as heterosexual reinforces the idea that heterosexuality is the default. In contrast, asking a heterosexual person "when did you know you were straight?" does not reinforce heteronormativity, as it is a question that is less commonly asked and does not assume that being straight is the norm. Option d is correct.

To know more about heterosexual, here

https://brainly.com/question/30531204

#SPJ1

Answer:

-0.0122 Wb

Explanation:

The magnetic flux through a loop of area A and with an angle θ between the magnetic field and the loop's normal is given by:

Φ = BAcos(θ)

The initial magnetic flux is:

Φ1 = BAcos(θ1) = 0.500 T * 0.100 m² * cos(15.5°) = 0.0476 Wb

The final magnetic flux is:

Φ2 = BAcos(θ2) = 0.500 T * 0.100 m² * cos(45.0°) = 0.0354 Wb

The change in magnetic flux is:

ΔΦ = Φ2 - Φ1 = 0.0354 Wb - 0.0476 Wb = -0.0122 Wb

Therefore, the resulting change in magnetic flux is -0.0122 Wb.

the electric field between the plates is 436.7 N/C.

The electric field between the plates of a parallel plate capacitor is given by:

E = σ/ε₀

where σ is the surface charge density and ε₀ is the permittivity of free space.

surface charge density =

σ = Q/A

σ = Q/A = (2 × 4.38 × 10^-11 C) / (2 × 5.68 × 10^-3 m²) = 3.861 × 10^-6 C/m²

We substitute this value of σ and the value of

ε₀ = 8.85 × 10^-12 F/m, we get:

E = σ/ε₀

E = (3.861 × 10^-6 C/m²) / (8.85 × 10^-12 F/m)

E = 436.7 N/C

Learn more about electric field at:

https://brainly.com/question/14372859

#SPJ1

Answer:

50 minutes

Explanation:

Since we need to find time, Time or T = Q / I. Thus, the time taken for current of 5mA to deliver 15c of charge is 3000 seconds which is equivalent to 50 minutes.

Answer:

0.163 rad/s^2

Explanation:

Let's start by calculating the gravitational potential energy of each pulley:

[tex]U = mgh[/tex]

For pulleys 1 and 2, the height difference is the same and is equal to the difference in radius:

[tex]h = R_o_u_t - R_i_n = 18in - 9in = 9in[/tex]

Using the given masses and converting to units of pounds, we can calculate the potential energy of pulleys 1 and 2:

[tex]U_1 = m_1gh = 210 lb * 9.81 m/s^2*9 in. / 12 in./ft = 144.2lb*ft[/tex]

[tex]U_2 = m_2gh = 210 lb * 9.81 m/s^2 * 9 in. / 12 in./ft = 144.2 lb*ft[/tex]

For pulleys 3, 4, and 5, the height difference is different for each pulley, and is equal to the difference in height between the top and bottom masses:

[tex]h_3 = 2 (R_o_u_t - R_i_n) = 2(18 in. - 9 in.) = 18 in.[/tex]

[tex]h_4 = 3 (R_o_u_t - R_i_n) = 3 (18 in. - 9 in.) = 27 in.[/tex]

[tex]h_5 = 4 (R_o_u_t - R_i_n) = 4 (18 in. - 9 in.) = 36 in.[/tex]

Using the given masses and converting to units of pounds, we can calculate the potential energy of pulleys 3, 4, and 5:

[tex]U_3 = m_3 g h_3 = 510 lb *9.81 m/s^2 * 18 in. / 12 in./ft = 748.5 lb*ft[/tex]

[tex]U_4 = m_4 g h_4 = 350 lb * 9.81 m/s^2 * 27 in. / 12 in./ft = 687.3 lb*ft[/tex]

[tex]U_5 = m_5 g h_5 = 130 lb * 9.81 m/s^2 * 36 in. / 12 in./ft = 382.8 lb*ft[/tex]

The total potential energy of the system is the sum of the potential energies of all pulleys:

[tex]U_t_o_t_a_l = U_1 + U_2 + U_3 + U_4 + U_5 \\= 210.0 lb*ft + 210.0 lb*ft + 748.5 lb*ft + 687.3 lb*ft + 382.8 lb*ft \\= 2238.6 lb*ft[/tex]

At the start, all pulleys are at rest, so the total kinetic energy of the system is zero. As the system moves, the potential energy is converted into kinetic energy, which is proportional to the angular velocity and the moment of inertia of each pulley:

[tex]K = \frac{1}{2} Iw^2[/tex]

The total kinetic energy of the system is the sum of the kinetic energies of all pulleys:

[tex]K_t_o_t_a_l = \frac{1}{2} I_1 w_1^2 + (1/2) I_2 w_2^2 + \frac{1}{2} I_3 w_3^2 + \frac{1}{2} I_4 w_4^2 +\frac{1}{2} I_5 w_5^2[/tex]

Since the system starts at rest, the total initial energy is equal to the total potential energy of the system:

[tex]E_i = U_t_o_t_a_l = 2238.6 lb*ft[/tex]

As the system moves, the total energy remains constant, so the final energy is also equal to the total potential energy:

[tex]E_f = U_t_o_t_a_l = 2238.6 lb*ft[/tex]

We can now use the conservation of energy principle to relate the initial and final energies to the kinetic energies of each pulley, and hence to their angular accelerations:

[tex]E_i = E_f + K_1 + K_2 + K_3 + K_4 + K_5[/tex]

Substituting the expressions for the kinetic energy and simplifying, we obtain:

[tex]w_1 = w_2 = w_3 = w_4 = w_5 = \sqrt{2g (\frac{U_t_o_t_a_l}{5I})} = 1.023 rad/s[/tex]

Finally, the angular acceleration of each pulley is given by:

[tex]\alpha_1 = \alpha _2 =\alpha _3 = \alpha_4 = \alpha_5 = \frac{w}{t} =\frac{w}{2\pi} = 0.163 rad/s^2[/tex]

Therefore, the angular acceleration of each pulley is 0.163 rad/s^2.