Part D
Based on your research, which source of energy do you think best meets the needs of society? Defend your answer in 50 to 100 words.

Answers

Answer 1

Energy is the fundamental need for lives. Fossil fuel is the energy source that is most needed in society. It is now replaced with solar energy as fossil fuels are nonrenewable resources.

What is the non-renewable and renewable source?

Nonrenewable resources are energy sources that are finite in amount and get depleted after some time as it takes millions of years to produce these resources. Fossil fuels though are needed but are nonrenewable and cause pollution.

Solar energy is a renewable source that is present in abundant and infinite quantity and does not get depleted fast after they are used excessively. They are also environmentally friendly and do not produces much pollution.

Therefore, fossil fuel and solar energy are the most demanded sources.

Learn more about fossil fuels here:

https://brainly.com/question/27775949

#SPJ1


Related Questions

how many moles of O2 will react with 0.6482 moles of H2O?
2C3H6O + 5O2 → 6CO + 6H2O

Answers

Answer:

n=0.648 moles

the ratio 5:6

x:0.648

x=0.54 moles

When placed in a cloud chamber, a radioactive substance does which of the following?

a. Leaves a trail of condensed water vapor.
b. Produces an electric current.
c. lonizes chemicals on the film present in the chamber.
d. Causes a liquid to reach its boiling point.

Answers

they give out particles which travel through the air until they are absorbed, either by the air itself or by some other material that blocks their path.

Solve and balance H2+Cl2

Answers

H2 + Cl2 → 2 HCl - Equation Balanced

Explanation:

Two elements H2and Cl2 combine to from a single compound, HCl. Hence, it is a combination reaction As two elements combine to from a compound, it is an element - element combination.

I hope it'll help you...

hey there!

[tex]H_2+Cl_2 -> 2HCl[/tex]

One hydrogen atom and one chlorine atom yields two moles of hydrochloric acid or also known as hydrogen chloride .

Uses of HCl are :-

•neutralization of alkaline agents
•as a bleaching agent, in food, textile, metal,
•and rubber industries

Atoms of arsenic (As) are often added to silicon (Si) in a process called doping to change the conductivity of the silicon. How does the addition of arsenic change the conductivity of silicon?

An atom of arsenic has one fewer valence electron and more electron shells than an atom of silicon, so the conductivity decreases because the arsenic atom gains an electron.
An atom of arsenic has one more valence electron and more electron shells than an atom of silicon, so the conductivity decreases because the arsenic atom loses the electron.
An atom of arsenic has one fewer valence electron and fewer electron shells than an atom of silicon, so the conductivity increases because the arsenic atom gains an electron.
An atom of arsenic has one more valence electron and more electron shells than an atom of silicon, so the conductivity increases because the arsenic atom loses the electron.

Answers

Answer:

B.) An atom of arsenic has one more valence electron and more electron shells than an atom of silicon, so the conductivity decreases because the arsenic atom loses the electron.

Explanation:

Silicon is located in the 3rd row and 14th column in the periodic table. Arsenic is located in the 4th row and 15th column in the periodic table. This means that arsenic has one more valence electron than silicon. Since arsenic is located one row down from silicon, its valence electrons occupy higher energy orbitals.

Silicon maintains a crystal-like lattice structure. Each silicon atom is covalently connected to assume this shape. When silicon gains one extra electron from arsenic, it experiences n-type doping. This new electron is not tightly bound in the lattice structure. This allows it to move more freely and conduct more electricity. This can also be explained using band gaps. Silicon, which previously had an empty conduction band, now has one electron in this band. This lowers the band gap between the conduction and valence bands and increases conductivity.

Answer:

its d

Explanation:

Imagine that the human population continues to increase, but we don't monitor or implement strategies to minimize our impact on the blue crab population.
Construct an argument supported by evidence for how increases in human populations impact the consumption of natural resources. In your answer, be
sure to include:

• the relationship between human populations and the consumption of resources

• a prediction of how the blue crab population would change with an increasing human population
evidence from the resources explored during the lesson
scientific reasoning

Answers

Answer:

The Explanation

Explanation:

:i imagine less blue crabs ngl

Which of the following is not a type of energy
A. Heat from an oven.
B. Electricity in a power cord.
C. Light from a lightbulb.
D. Smoke from a fire.

Answers

Answer:

smoke from a fire Is not an example of energy

Why do fireworks produce heat when they explode?

Answers

a fuse is attached to gunpowder present below the shell. when this fuse is ignited with a flame, the gunpowder explodes creating heat and gas that cause a buildup of pressure beneath the shell. hope this helps :)

uranium-235 fission given: energy released = about 200 MeV per individual reaction (mass = 235 amu) find the balanced nuclear reaction

Answers

The fission of uranium-235  leads to the equation; 235/92U + 1 neutron → 92/36Kr + 141/56Ba + 3 neutrons + energy.

What is a fission reaction?

The term fission reaction refers to the reaction in which a nucleus is bombarded with a particle  which causes the nucleus to break down. This leads to the release of energy.

The fission of uranium-235  leads to the equation; 235/92U + 1 neutron → 92/36Kr + 141/56Ba + 3 neutrons + energy.

Learn more about fision:https://brainly.com/question/913303

#SPJ1

What is the formula for calculating the change in thermal energy?

Answers

Answer: :Change in thermal energy = mass x specific heat capacity x change in temperature.

Explanation: what it basically means is mass x heat x the change in temperature.

Change in thermal energy = mass x specific heat capacity x change in temperature.

Why do medical implants and prosthetics should be carefully designed when placed inside or on the surface of the body?

Answers

Answer:

because it needs to fit exactly into how your body is like

Explanation:

What was in Flint's water that caused 12 people to die?(1 point)

lead

total triahalomethanes

Legionella pneumophila

Escherichia coli

Answers

The presence of lead in Flint's water is what caused the death of 12 people.

Option A.

What was in Flint's water?

The Flint water crisis started in 2014 when the city of Flint, Michigan, switched its water source from Lake Huron to the Flint River as a cost-cutting measure.

The water from the Flint River was more corrosive and caused lead to leach from the pipes, contaminating the drinking water. This led to high levels of lead in the drinking water, which is a potent neurotoxin that can cause a variety of health problems, particularly in children.

The contamination also led to an outbreak of Legionnaires' disease, a severe form of pneumonia, which was linked to at least 12 deaths in the area.

Learn more about flint's water here: https://brainly.com/question/13688064

#SPJ1

An unknown substance weighing 50.0g was heated from 36.0 to 69.0. In this process, the substance absorbed 5890.0J of energy. What is the specific heat of the substance

Answers

I am assuming that the temperature given is in Celsius. In order to solve for the heat capacity, use q = mc△T. Your q = -5890.0J, m = 50.0 g, and △T 33.0 °C (69.0 - 36.0). Use algebra to solve for your heat capacity (c). Remember, heat capacity is measured in joules per gram Celsius (J/g °C), and don’t forget your significant figures.

Radiocarbon dating can be used to determine the age of a fossil because the amount of carbon-14 found in the fossil...

a. increases steadily over time.
b. decreases steadily over time.
c. is unaffected by time.
d. remains the same for the first 10 years, and then rapidly decreases.

Answers

Answer:

B

Explanation:

Carbon-14 will steadily decrease in a dead organism. Fossils are no different. Sense it's dead already, it will still be getting rid of the last bit of carbon-14 it has in a steadily way.

Question 1 (1 point) Which of the following summarizes cellular respiration?

Oxygen reacts with glucose to produce carbon dioxide and water, and release energy.

Light energy is changed into chemical energy.

Chemical energy is changed into light energy.

Light energy is used to join water and carbon dioxide to make oxygen and glucose​

Answers

Answer:

oxygen reacts with glucose to produce carbon dixiode into water and release energy. It is 1

Explanation:

It is A

Explanation:

Calculate the pressure (in kpa) of 1.5 mole of helium gas at 354 k when it occupies a volume of 16.5l.

Answers

Answer:

267.57 kPa

Explanation:

Ideal gas law:

PV = n RT        R = 8.314462    L-kPa/K-mol

P (16.5) = 1.5 (8.314462)(354)       P = 267.57 kPa

How many grams is 3.2 moles of water

Answers

Answer:

similarly 1 mole of water is equivalent to molecular mass of water x 3 that is 18x3=54 gram

Explanation:

How many moles of oxygen are required to make 4 moles of water?​

Answers

Answer:

2 moles of oxygen

Explanation:

Basic Equation (given) :

2H₂ (g) + O₂ ⇒ 2H₂O (g)

From this, we understand for every 2 moles of water, 1 mole of oxygen is needed

Taking the number of moles of oxygen and water in proportion :

1 : 21 × 2 : 2 × 22 : 4

Therefore, 2 moles of oxygen are required to make 4 moles of water.

[tex] \textsf{\qquad\qquad\huge\underline{{\sf Answer}}} [/tex]

As per the given equation, we can infer that :

For getting 2 moles mole of water, 1 mole of oxygen gas was required. so to get 4 moles of water we need :

We just have to multiply the whole reaction by 2 on both sides, in order to get 4 moles of H2O on product side.

[tex] \qquad \qquad \rm4 \: H_2 + 2 \: O_2 \rightarrow4 \: H_2O[/tex]

therefore, we need

[tex]\qquad \sf  \dashrightarrow \: 2 \times 1 = 2 \: moles \: \: oxygen \: gas[/tex]

Chemical labels must contain a product identifier, signal word and a pictogram to represent the hazards. what other information is required on a chemical label?

Answers

Answer:

The HCS now requires the following elements on labels of hazardous chemicals: Name, Address and Telephone Number of the chemical manufacturer, importer or other responsible party

Explanation:

I tried, I think this is the correct answer.

Which equation represents a combustion reaction?
1) 4fe + 3o2 = 2fe2o3
2) 2h2o = 2h2+o2
3) 2agno3 + h2s = ag2s + 2nho3
4) 2al + n2= 2aln

Answers

Answer:

2

Explanation:

do take note that combustion reactions releases oxygen.

what are three different ways land is used as a resource

Answers

1. Farming
2. Build transportation
3 Mining

Which element is number 14 on the periodic table?.

Answers

Answer:

Silicon

Explanation:

When viewing the periodic table of elements and locating atomic number 14, you will find that the element present is Silicon (Si), of which is within the metalloid elemental group.

Define density please thanks!!

Answers


the degree of compactness of a substance.

A balloon containing 0.15mol of hydrogen gas (H2) has a volume of 0.75L. If the balloon is further inflated with additional hydrogen gas to a 3.75L volume, what is the total mass of hydrogen gas in grams in the balloon

Answers

The total mass of hydrogen gas in grams in the balloon given the data is 1.5 g

How to determine the new mole of hydrogenInitial mole (n₁) = 0.15 moleInitial volume (V₁) = 0.75 LNew volume (V₂) = 3.75 LNew mole (n₂) = ?

The new mole of the gas can be obtained by using the ideal gas equation as follow:

PV = nRT

V / n = RT / P

RT / P = constant

V₁ / n₁ = V₂ / n₂

0.75 / 0.15 = 3.75 / n₂

5 = 3.75 / n₂

Cross multiply

5 × n₂ = 3.75

Divide both sides by 5

n₂ = 3.75 / 5

n₂ = 0.75 mole

How to determine the mass of hydrogenNumber of mole = 0.75 moleMolar mass of H₂ = 2 g/moleMass of H₂ = ?

Mass = mole × molar mass

Mass of H₂ = 0.75 × 2

Mass of H₂ = 1.5 g

Learn more about ideal gas equation:

https://brainly.com/question/4147359

#SPJ1

In an ionic bond, metals lose electrons to become _____.

Answers

Answer:

In an ionic bond, metals lose electrons to become Cations.

Explanation:

Metal atoms lose electrons to form positive ions (cations).

A mole is known by what other name?

Answers

Answer: avogadros number/constant

Explanation:

witchh organsim primary cosumers

Answers

Answer:

Primary consumers are herbivores, feeding on plants

Explanation:

:)

Primary consumers are at the second trophic level of the food pyramid. This means that they eat producers. An example of a primary consumer would be a grasshopper eating grass. Primary consumers get eaten by secondary consumers, such as a rabbit who eats grass, and the rabbit gets eaten by a fox.

Which of the following happens when a reaction reaches dynamic equilibrium in a closed system?

A) The concentrations of the reactants and products increase.
B) The concentrations of the reactants and products remain constant
C) The rate of the forward reaction is faster than the rate of the reverse reaction.
D) The rate of the forward reaction is slower than the rate of the reverse reaction

Answers

Answer: B

Explanation:

At equilibrium, the rate of the forward reaction is equal to the rate of the reverse reaction, and thus the concentrations of the reactants and products must be constant.

6.0 L of gas in a piston at a pressure of 1.0 atm are compressed until the volume is 3.5 L. What is the new pressure inside the piston?

Answers

From the calculations and by the use of Boyles law, the new pressure of the gas is 1.7 atm

What are gas laws?

The term gas law is used to demonstrate the relationship between the volume, pressure, number of moles and temperature of a gas.

Using the Boyles law;

P1 = 1 atm

P2 = ?

V1 = 6 L

V2 = 3.5 L

P1V1= P2V2

P2= P1V1/V2

P2= 1 atm * 6 L/3.5 L

= 1.7 atm

Learn more about Boyles law:https://brainly.com/question/1437490

#SPJ1

A nuclear fission reaction has mass difference between the products and the reactants of 0.0593 Calculate the amount of energy released by the reaction

a. 1.09 x 10(-45)J

b. 3.28 x 10(-37)J

c. 9.85 x 10(-29)J

d. 8.86 x 10(-12)J

Answers

The amount of energy released by the reaction b. 3.28 x 10(-37)J

What is a nuclear fission reaction?

A nuclear fission reaction in which the nucleus is divided into numerous small nuclei.

The mass difference is 0.0593

To calculate the energy

[tex]E = \Delta mc^2\\\\c = 3 \times 10^8\;m/s\\\\m = 3.86 \times 10^-^3 \;kg\\[/tex]

Putting the values in the equation

[tex]E = (0.0593) (3 \times 10^8\;m/s)^2 = 5.337 \times 10^1^5[/tex]

Thus, the correct option is b. 3.28 x 10(-37)J

Learn more about nuclear fission reaction

https://brainly.com/question/913303

#SPJ1

At 0.500 atm and 15.0°C a sample of gas occupies 120. L. What volume does it occupy at
0.250 atm and 10.0°C?

O236 L
O 60 L
O 111 L
O 480 L

Answers

The combined gas law is used to determine the relationship between the pressure, temperature, and volume of the gas. The volume of the gas at 0.250 atm is 236 L. Thus, option A is correct.

What is combined gas law?

The combined gas law uses the ideal gas equation to estimate the temperature, volume, or pressure of the given gas.

Given,

Initial pressure = 0.500 atm

Initial temperature = 288.15 K

Initial volume = 120 L

Final pressure = 0.250 atm

Final temperature = 283.15 K

The final volume is calculated as:

V₂ =  (P₁V₁ T₂) ÷ (P₂ T₁)

= 0.500 × 120 × 283.15 ÷ 0.250 × 288.15

= 16989 ÷ 72.03

= 235.86 L

Therefore, 236 L is the final volume at 0.250 atm.

Learn more about combined gas law here:

https://brainly.com/question/14648508

#SPJ1

Other Questions
If you were tasked with going into an elementary school and teaching thestudents general economics, what would you tell them? How are an objective summary and an explanatory essay similar?A. Both pieces of writing should include as many details as possible.B. Neither piece of writing should include many direct quotations.C. Neither piece of writing should reflect the author's point of view.D. Both pieces of writing should make an interpretation about thepast. The health of each one of us depends on the health of all of us Read the sentence:He doesn't have nothing but the clothes on his back.Which of the following best corrects the double negative in the sentence?A. He doesn't have no things but the clothes on his back.B. He doesn't have anything but the clothes on his back.C. He doesn't own no clothes except the shirt he's wearing.D. He doesn't want to buy nothing except a new shirt. Convert 23/9 to decimal. round your answer to the nearest thousandths. Identify all points and line segments in the picture below If a x b = 2a - 3b + ab, then 3 x 5 + 5 x 3 is equal to?do answer. What does this add to 3/11 x 3 1/4 Explain the following Risk and Hazards and why it occurs during hiking activities. Write your answers at the back of this page or on a separate sheet of paper.1. Hikers getting lost.2. Medical incidents such as strokes, heart attacks and illnesses.3. Fatigue, hypothermia, dehydration and heat exhaustion.4. Injuries from slips and falls on the trail.5. Injuries caused by animals, snakes and insects on the trail.6. Hikers getting trapped or injured by forces of nature such as flooding, veld fires and lightning.7. Injuries brought about by criminal attacks, assaults and robberies. Question 7 of 10Which daily function in the African tradition was not connected to songs?CA. ReligionO B. FertilityO C. WarD. All of the above were connected. PLEASE HELP 30PTS + BRAINLIEST In this activity, you will summarize a short story that youve read. If you are not familiar with a short story, you can also search online for a short story to read and summarize. Record your response, in Spanish, using any audio recording software. In your recording, mention the author and genre of the story, and describe some elements like the setting, the characters, and point of view. Submit that audio file to your teacher.you can just type out a short story. apologies if i am asking for too much but my classes end in 3 days so i'm rushing and trying to do 2 assignments at once lol. you'll be a life saver help asap please and thank you !!!!! Describe the presidency of Ronald Reagan Calculating Binomial Probabilities - Suppose you work for an airline and you are taking reservations for a flight on an aircraft that has 152 seats. You know, based on historical flights trends, that if you sell a single ticket there is a 91% chance that the person with the ticket will actually show up for the flight. You decide to try to make a little extra money by overbooking your flight and you sell 160 tickets hoping that not more than 152 people will actually show up for the flight (note: this is a common business practice! Click here to watch a video that explains why)Explain how this scenario meets the four requirements in the definition of a Binomial Distribution.Identify what n and p are in this exampleUse technology (StatCrunch, Statdisk, or Excel) to calculate the probability that if you sell 160 tickets for your flight, more passengers will show up than there are seats available (again, the plane has 152 seats total). Post an image of your technology output using the Insert/Edit Image feature in Blackboard (no attachments!)Based on this probability, do you think it is a wise business practice to oversell your flight in this manner? Explain. what amendment did ex-confederate states have to ratify before they could re-enter the union? what are some examples the soviet union influence other countries instead of going to war against the united states How did the Vietnam War affect President Johnsons domestic agenda? What is the purpose of food courts?? in a paragraph (5 to 7 sentences) please help!!!!!!!!!! the heat generated by stove element varies directly as a square of the voltage and inversely as a resistance. If the voltage quadruples, what needs to be done to quadruple the amount of heat generated?