observe the figure given carefully volume of water in each vessel is shown arrange them in order of decreasing pressure at the base of each vessel explain the reason​

Answer:

rs 900

Explanation:

the process is given

Horizontal component = 75 · cosine(65°)  =  31.7 N  

Vertical component = 75 · sine(65°)  =  68.0 N

Answer:

Lindsay is planning a flight from St. Catherines to Hamilton, which lies due west of St. Catharines. Her aircraft flies at a speed of 200 km/h in still air. A wind of 50.0 km/h is blowing from [W 60.0� N]. In what direction must she aim the airplane to fly directly to Hamilton?

------------

It's a triangle problem.

The long side is the 200 km/hr, at an angle to be determined.

-----

1 side is 50 km/hr at an angle of -60 degs or 300 degs.

The 3rd side's length is not known, but it's at an angle of 180 degs (along the x-axis).

Lindsay has to fly this plane towards this direction [W 12.5° S] to get to Hamilton.

From this question, the plane is still up in the air.

We have wind blowing in [W 60° N ]

To solve the problem we have to make use of the sine rule

[tex]\frac{SinA}{a}=\frac{SinB}{b} =\frac{SinC}{c}[/tex]

We put the values in the equation, we have:

50/Sinθ = 200/sin60°

The next step is to cross multiply

50 x sin60° = 200Sinθ

50 x 0.8660 = 200sinθ

We make Sin θ the subject

Sine θ = 43.30/200

sine θ = 0.2165

we find the value of θ

θ = sine⁻¹(0.2165)

θ = 12.50

So Lindsay has to fly this plane towards this direction

[W 12.5° S]

Here is a similar question https://brainly.com/question/13338067?referrer=searchResults

Answer: obey authority figures

Explanation:

Answer: Obey authority figures

Explanation:

Answer:

3 m/s ^2 rounded to one signifiicant figure.

Explanation:

Hope this helped!

Answer:

a= 1 m/s^2

Explanation:

Average acceleration can be found by dividing the change in velocity by the time.

a= ΔV/t

The change in velocity is the difference of the final velocity and initial velocity.

ΔV= final velocity - initial velocity

The final velocity is 30 m/s and the initial velocity is 25 m/s

ΔV= 30 m/s- 25 m/s

ΔV= 5 m/s

The time is 5 seconds.

Now we know the two values.

ΔV= 5 m/s

t= 5 s

Substitute the values into the formula.

a= 5 m/s / 5 s

Divide.

a= 1 m/s/s

a= 1 m/s^2

The average acceleration of the car is 1 meter per second squared.

Answer:

Simple machines are useful because they reduce effort or extend the ability of people to perform tasks beyond their normal capabilities. Simple machines that are widely used include the wheel and axle, pulley, inclined plane, screw, wedge and lever.

Answer:

Simple machines are useful because they reduce effort or extend the ability of people to perform tasks beyond their normal capabilities. Simple machines that are widely used include the wheel and axle, pulley, inclined plane, screw, wedge and lever.

Explanation:

funny answer cuz peeps be lazy

Answer:

The range of the projectile is 60 meters

Explanation:

To determine the range/distance of the projectile, the formula for velocity is used;

velocity = distance/time

where velocity is 15 m/s

time is 4 seconds

distance is unknown

From the formula above, distance is made the subject and thus

distance = velocity × time

distance = 15 × 4

distance = 60 m

The range of the projectile is 60 meters

Answer:

Mechanical advantage = 20

Explanation:

Given:

Output force = 8,000 N

Input force = 400 N

Find:

Mechanical advantage

Computation:

Mechanical advantage = Output force / Input force

Mechanical advantage = 8,000 / 400

Mechanical advantage = 20

Answer:

D i think

Explanation:

Answer:

6. False

7. a

8.kinetic

9. ek/n

10.True

Explanation:

Answer:

1. kinetic

2. d

3. b

4. true?

5. true

6. True

7. a

8. kinetic

9. Thermal

10. true

Answer:

SI

Explanation:

Answer:

Output varies

Explanation:

Here the outputs of gallons of gasoline and flight fuel is mentioned of two refineries namely Refinery EM and Refinery CG. The output has been mentioned with respect to one barrel of crude oil. So, one barrel of crude is used by both the refineries.

So, here the output (gallons of gasoline and flight fuel) varies while the input (one barrel of crude oil) remains constant.

Answer:

Electromagnetic waves consist of both electric and magnetic field waves. These waves oscillate in perpendicular planes with respect to each other, and are in phase. The creation of all electromagnetic waves begins with an oscillating charged particle, which creates oscillating electric and magnetic fields.

Explanation:

Answer:

Experiment

Record Results

Predict

Hypothesis

Analyze and Conclude

Observation and Questioning

Note: The question is incomplete. The complete question is given below:

A student wants to test if a bean plant will grow taller under green light than under sunlight. Select from the drop-down menu the correct step of the scientific method that each statement describes. Two identical bean plants are grown next to each other. They receive the same amount of water and sunlight. One plant is covered with a green, light-filtering plastic cover, and the other with a clear plastic cover. Measurements of the bean plants’ heights are recorded every day for two weeks. The student writes a lab report detailing the experimental procedure and results. The bean plant grown under the green filter will grow taller than the bean plant grown under unfiltered sunlight. Green light makes plants grow taller. The measurements show that the plant grown in natural sunlight grew taller than the green-filtered plant. So green light does not make plants grow taller. Plants are colored green, so maybe they grow more in green light.

Explanation:

1. An experiment is a procedure carried to test a hypothesis in order to support, reject or confirm the hypothesis. The steps below are for an experiment to whether bean plants grow taller under green light or sunlight.

Two identical bean plants are grown next to each other. They receive the same amount of water and sunlight. One plant is covered with a green, light-filtering plastic cover, and the other with a clear plastic cover. Measurements of the bean plants’ heights are recorded every day for two weeks.

2. Results of the experiment are recorded. The statement below indicates that results were recorded.

The student writes a lab report detailing the experimental procedure and results.

3. Predictions are expected results based on an initial hypothesis. The statement below is a prediction.

The bean plant grown under the green filter will grow taller than the bean plant grown under unfiltered sunlight.

4. A hypothesis is a statement that seeks to explain an observed phenomena. The statement below is a hypothesis:

Green light makes plants grow taller.

5. Analysis and conclusion:  the results of the experiment are analysed and conclusions are then drawn. The statement below shows analysis and conclusion based on results of the experiment:

The measurements show that the plant grown in natural sunlight grew taller than the green-filtered plant. So green light does not make plants grow taller.

6. Observations and Questions are necessary parts of the scientific method. Observing phenomena around and asking questions about our observations helps in the process of making a hypothesis. The statement below is illustrates observation and questioning:

Plants are colored green, so maybe they grow more in green light.

Answer: D,F,C,B,E,A

Explanation:

i took the test

Answer: Riding a bike to the park

Explanation:

Answer:

It is B

Explanation:

I did the test

From the given options, the end product of mitosis is Two identical nuclei (option b)

Mitosis is a fundamental cellular process that occurs in somatic (non-reproductive) cells, aiming to create two genetically identical daughter cells from one parent cell. It consists of several stages: prophase, metaphase, anaphase, and telophase.

During prophase, the chromatin (a combination of DNA and proteins) condenses into visible chromosomes, and the nuclear membrane disintegrates. In the subsequent stage, metaphase, the chromosomes align at the cell's equator, ensuring each daughter cell receives an equal number of chromosomes.

Next comes anaphase, where the paired chromosomes are pulled apart and move towards opposite poles of the cell. The final phase, telophase, involves the formation of two separate nuclei around the separated chromosomes.

At the end of mitosis, the single parent cell has divided into two genetically identical daughter cells, each containing a complete set of chromosomes. These daughter cells are fully functional and capable of carrying out their specific tasks within the organism.

So, the correct Answer: B. Two identical nuclei.

To know more about mitosis here

https://brainly.com/question/32255070

#SPJ6

Answer:

a

Explanation:

Answer:

A

Explanation:

Answer:

I don't understand what is a power cane??

Answer: Terminal velocity is achieved, therefore, when the speed of a moving object is no longer increasing or decreasing; the object's acceleration (or deceleration) is zero.

Explanation:.

Answer: Terminal velocity is achieved, therefore, when the speed of a moving object is no longer increasing or decreasing; the object's acceleration (or deceleration) is zero.

As others have said, 8 seconds to get to 90% of terminal velocity. But if you're falling from outer space, you could reach speeds much higher than terminal velocity, and slow down when you reach the atmosphere. If coming in from a long distance, you'll burn up like a meteorite.

Explanation:

Answer:

3

Explanation:

I took an Educated guess because i really dont know tbh

Answer:

Neither.

Explanation:

A giraffe is . . .a giraffe.

In a similar manner, light is not a wave, but behaves like a wave. In this section, you will find that light also behaves like a particle.

In a way, light is...

also:

Isaac Newton tried to prove that light is a particle; Christiaan Huygens demonstrated that light is a wave. These men were both right and wrong.

Light is neither wave nor particle, (LOOK HERE)

but it does exhibit properties associated with waves and properties associated with particles.

light ;D i Hope Im right plz mark brainliest

Have a great day

Answer:

This question appear incomplete

Explanation:

This question appear incomplete because of the lack of options. However, a connected web of cells is generally referred to as the tissue. These cells are joined together by cell-cell adhesion (a form of bond) to form the tissue. The type of tissue being referred to here is the nervous tissue as this is the type of tissue present in the nervous system (including the central nervous system of which the brain is a part of).

Answer:

O c.the force of the fish tail on the water..........

Answer:

21000 N

Explanation:

From the question given above, the following data were obtained:

Change in momentum = 105000 kg.m/s

Time = 5s

Force =?

Force is related to momentum and time according to the following formula:

Force = Change in momentum / time

With the above formula, we can calculate the force the white car experience during the collision. This can be obtained as illustrated below:

Change in momentum = 105000 kg.m/s

Time = 5s

Force =?

Force = Change in momentum / time

Force = 105000 / 5

Force = 21000 N

Thus, the white car experience a force of 21000 N during the collision.

Answer:

D is the wavelength

A is the crest

C is amplitude

B is trough

G is wavelength

H is compression

I is rarefaction

Answer:

a) τ = -518 lb-inch , b)  d = 0 inch

Explanation:

a) The moment of a force is given by

         τ = F x r

The bold letters indicate vectors, we can solve the magnitude of this expression with

        τ = F r sin θ

and the angle by the right hand rule.

In general, the applied force is perpendicular to the rubber and in such a direction that the moment is opposite to the movement, therefore the angle is 270 = -90º and the sin 270 = -1

        τ = -F r

To perform a complete calculation, the radius of the rubber is needed, for example for a small car the radius is about 14 inch = 1,167 feet

       τ = -37 14

       τ = -518 lb-inch

The point o is assumed to be the center of the wheel, the negative sign indicates that the moment is clockwise

b) As the rubber is a circle and the force is perpendicular, the vector product gives an emoticon perpendicular to the rubber, so that this value decreases to zero we must reduce the application point (distance), that is, the distance must be zero.

            d = 0 inch

Answer:

The length of the image of the pole is 4/3 m

Explanation:

The given parameters are;

The length of the Pole = 4 m

The type of mirror = Convex mirror

The distance of the pole from the mirror = 2 m

The mirror formula for convex mirrors is presented here as follows;

[tex]\dfrac{1}{U} - \dfrac{1}{V} = - \dfrac{1}{F}[/tex]

Where;

U = The object (pole) distance from the mirror = 2 m

V = The image of the objects (pole) distance from the mirror

The focal length of the mirror

Therefore, by substitution, we have;

[tex]\dfrac{1}{2} - \dfrac{1}{V} = - \dfrac{1}{1}[/tex]

[tex]\dfrac{1}{2} + 1 = \dfrac{1}{V}[/tex]

[tex]\dfrac{1}{V} = \dfrac{1}{2} + 1 = \dfrac{3}{2}[/tex]

[tex]V = \dfrac{2}{3}[/tex]

We have;

[tex]Magnification = \dfrac{Image \ height}{Object \ height } = \dfrac{Length \ of \ the \ Image \ of \ the \ Pole}{Length \ of \ the \ of \ the \ Pole } =\dfrac{-V}{U}[/tex]

Which by substitution gives;

[tex]Magnification = \dfrac{Length \ of \ the \ Image \ of \ the \ Pole}{4} =\dfrac{-\dfrac{2}{3} }{2} = \dfrac{2}{6}[/tex]

[tex]{Length \ of \ the \ Image \ of \ the \ Pole}{} = 4 \times \dfrac{2}{6} = \dfrac{4}{3}[/tex]

The length of the image of the pole = 4/3 m