The amount of each mortgage payment is $925.39 is the answer.
Given: Mozart borrowed a mortgage loan of $143,200, Monthly payments required for 20 years, APR = 4.75%, compounded monthly
To Find: Amount of each mortgage payment
Monthly payments are calculated using the formula; P = L[c(1 + c)n]/[(1 + c)n - 1] where L is the loan amount, P is the monthly payment, n is the number of payments, and c is the periodic interest rate.
Substituting the given values, Loan amount, L = $143,200APR = 4.75% compounded monthly= 0.0475/12 = 0.00395833 (Periodic interest rate)
Number of payments, n = 20 years * 12 months/year= 240
Periodic interest rate, c = 0.00395833
Substitute the given values in the formula, P = 143200[0.00395833(1 + 0.00395833)240]/[(1 + 0.00395833)240 - 1]≈ $925.39
Hence, the amount of each mortgage payment is $925.39.
know more about mortgage loan
https://brainly.com/question/28290141
#SPJ11
a. Explain the independence and accelerationist hypotheses that
are at the basis of New Keynesian macro models.
b. Give reasons why the change in inflation appears to be barely
adjusting in recent yea
New Keynesian macro models are based on the independence and accelerationist hypotheses. The independence hypothesis assumes that monetary policy has the ability to impact real output in the short term, but it does not have an effect on the natural rate of output in the long term.
The accelerationist hypothesis, on the other hand, suggests that an increase in demand, induced by a monetary policy that stimulates output, leads to a higher natural rate of output. This means that the long-term response of output to monetary policy is more significant than the short-term response.Recently, inflation appears to be barely adjusting for a number of reasons. First, inflation expectations have remained low and stable for a long time, and therefore, firms and households do not expect any significant changes in inflation in the near future. Second, technological progress has led to cost savings and increased competition,
which has put downward pressure on prices. Third, globalization has allowed firms to source inputs and labor from around the world, leading to lower costs. Fourth, the labor market has remained relatively weak in recent years, which has limited wage growth and thus, prevented inflationary pressures from building up. Finally, central banks have been cautious in their approach to inflation targeting, and have been hesitant to raise interest rates too quickly, which has limited their ability to address any inflationary pressures that may arise.
To know more about hypothesis visit:
brainly.com/question/29576929
#SPJ11
Gamma Corporation compiled the following list of costs related to manufacturing for the year ended December 31, 2019:
Direct materials used in production $479,800
Direct labor $316,700
Total manufacturing overhead $668,900
They have also provided the following information:
The balance of work in process inventory on January 1, 2019 is equal to the balance of work in process inventory on December 31, 2019.
Finished goods inventory had a balance of $154,100 on January 1, 2019 and a balance of $231,200 on December 31, 2019.
Do not enter dollar signs or commas in the input boxes.
Do not use the negative sign.
a) Calculate the cost of goods manufactured for the year ended December 31, 2019.
Cost of goods manufactured: $Answer
b) Calculate cost of goods sold for the year and show how the cost of goods sold section would appear in a detailed income statement.
Cost of Goods Sold
Beginning Finished Goods Inventory $Answer
Add: Cost of Goods Manufactured $Answer
Goods Available for Sale $Answer
Deduct: Ending Finished Goods Inventory $Answer
The cost of goods sold manufactured for the year ended December 31, 2019 for Gamma Corporation is $1,388,300
Direct Materials Used = $479,800
Direct Labor = $316,700
Total Manufacturing Overhead = $668,900
Beginning Work in Process Inventory = Ending Work in Process Inventory
Cost of goods sold is an accounting phrase that refers to the total amount of direct costs associated with manufacturing the products that a firm sells.
Calculating the Cost of goods sold (COGS) -
COGS = Beginning Finished Goods Inventory + Cost of Goods Manufactured - Ending Finished Goods Inventory
= 154,100 + 1,465,400 - 231,200
= 1,388,300
The cost of goods sold section in a detailed income statement would appear as per the Sales revenue
Cost of Goods SoldBeginning Finished Goods InventoryCost of Goods ManufacturedEnding Finished Goods Inventory= Gross Profit
Read more about cost of goods sold on:
https://brainly.com/question/24561653
#SPJ4
Thank you very much! Upvote is guaranteed with correct
answers!
Question 2 Suppose that Jo has an inverse demand for frog's legs given by P = 3/QD, while Kyle's inverse demand for frog's legs is given by P=4 - QP. Graphs of each consumer's demand curve are shown b
Demand for Jo is elastic at points A, B, and C, while demand for Kyle is elastic at points Q and R.
To calculate the elasticity for Jo and Kyle, we need to use the formula for price elasticity of demand, which is given by:
E = (dQD/dP) * (P/QD)
For Jo:
At point A:
P = 2, QD = 1, so dQD/dP = -1/(dP/dQD) = -1/3.
E = (-1/3) * (2/1)
= -2/3.
Since the elasticity is negative, demand for Jo is elastic at point A.
At point B:
P = 1, QD = 2, so dQD/dP = -1/(dP/dQD) = -1/6.
E = (-1/6) * (1/2)
= -1/12.
Since the elasticity is negative, demand for Jo is elastic at point B.
At point C:
P = 1/2, QD = 4, so dQD/dP = -1/(dP/dQD) = -1/4.
E = (-1/4) * (1/2)
= -1/8.
Since the elasticity is negative, demand for Jo is elastic at point C.
For Kyle:
At point Q:
P = 1, QD = 3, so dQD/dP = -1/(dP/dQD) = -1/4.
E = (-1/4) * (1/3)
= -1/12.
Since the elasticity is negative, demand for Kyle is elastic at point Q.
At point R:
P = 2, QD = 2, so dQD/dP = -1/(dP/dQD) = -1/1 = -1.
E = (-1) * (2/2)
= -1.
Since the elasticity is negative, demand for Kyle is elastic at point R.
To learn more about demand follow the link:
https://brainly.com/question/30402955
#SPJ4
The complete question is:
Suppose that Jo has an inverse demand for frog’s legs given by P=3/QD, while Kyle’s inverse demand for frog’s legs is given by P=4−QD. Find the elasticity for Jo (left graph) at points A, B, and C and Kyle (right graph) at points Q and R and state whether their demand is elastic, inelastic, or unit elastic
A firm's marginal profit, P, as a function of its total cost, C, is given by the equation below.
Find the profit function, P(C), if P = $10 when C = $62.
To find the profit function, P(C), we need to use the given information about the firm's marginal profit and total cost.
The equation provided is: P = $10 when C = $62. This equation represents the marginal profit, which is the derivative of the profit function with respect to total cost. To find the profit function, we need to integrate the marginal profit function with respect to total cost.
Integrating the marginal profit function will give us the profit function P(C). Let's integrate the function with respect to C:
∫P dC = ∫$10 dC
Integrating both sides, we have:
P(C) = ∫$10 dC
Since the integral of a constant is equal to the constant multiplied by the variable, we have:
P(C) = $10C + K
Now we can use the given information to determine the value of the constant K. We know that when C = $62, P = $10. Substituting these values into the profit function, we can solve for K:
$10 = $10(62) + K
$10 = $620 + K
K = $10 - $620
K = -$610
Therefore, the profit function P(C) is: P(C) = $10C - $610
Visit here to learn more about profit function:
brainly.com/question/16458378
#SPJ11
Iridium Bank, a bank headquartered in Australia reports the following balance sheet (in billions AU$). Liabilities Assets Cash 10 Deposits 70 Government securities 20 Short-term CDs 5 Retail loans 40
The total assets of Iridium Bank in billions AU$ is $75.
This is because the total of government securities, short-term CDs, retail loans in assets are $20 + $5 + $40 = $65 billion respectively. In addition to these, the cash that is there is also an asset. Thus, the total assets of Iridium Bank is $65 + $10 = $75 billion.In the given balance sheet, the assets of the Iridium Bank include Cash, Government securities, short-term CDs, and Retail loans which are summed up to be $75 billion. Similarly, the liabilities of the bank include Deposits which is $70 billion. Hence, Total Assets = $65+$10=$75 billion.
The term "total assets" refers to all of a small business's assets, or valuable items. Remembered for complete resources is cash, debt claims (cash attributable to you), stock, gear, instruments and so on.
Know more about total assets, here:
https://brainly.com/question/21185895
#SPJ11
a bond has a quote of 985 and it pays semi-annual coupon. the last coupon payment was made 45 days ago. what is the invoice price if coupon is 70$ (every six month) assume 182 days between 2 coupons payments.
1,002.31
1007.45 1
012.13
999.55
The nearest cent, the invoice price of the bond is $1002.31.
To calculate the invoice price of the bond, we need to consider the accrued interest since the last coupon payment was made 45 days ago.
First, let's calculate the accrued interest:
Accrued Interest = (Number of days since last coupon payment / Number of days between coupon payments) * Coupon Payment
Accrued Interest = (45 / 182) * $70
Accrued Interest ≈ $17.14
Next, let's calculate the invoice price:
Invoice Price = Quote + Accrued Interest
Invoice Price = $985 + $17.14
Invoice Price ≈ $1002.14
Rounded to the nearest cent, the invoice price of the bond is $1002.31.
Therefore, the correct answer is 1,002.31.
Learn more about Invoice Price
https://brainly.com/question/1384895
#SPJ4
you are conducting a study of students doing work-study jobs on your campus. among the questions on the survey instrument are the following. a. how many hours are you scheduled to work each week? answer to the nearest hour. b. how applicable is this work experience to your future employment goals? respond using the following scale: 1
One survey question is asking about the weekly hours that the students scheduled to work. In this question, the respondents are required to answer the number of hours that they work every week.
They are required to answer the number to the nearest hour.The second survey question is asking about the relevance of the work experience to the respondents’ future employment goals They are asked to respond using the following scale: 1-Not at all applicable, 2-Slightly applicable, 3- Moderately applicable, 4-Very applicable, and 5-Extremely applicable.For such more question on Moderately
https://brainly.com/question/31265791
#SPJ11
Write about the role of the United Nation in current
world politics and UN relations with China with no
plagiarism.
The United Nations (UN) plays a significant role in current world politics, serving as an essential platform for international cooperation and addressing global challenges.
As an intergovernmental organization founded in 1945, the UN's primary objectives are to maintain international peace and security, promote social progress, foster economic development, and protect human rights. With its 193 member states, the UN serves as a forum for diplomatic negotiations, provides humanitarian aid, and facilitates peacekeeping operations.
China, as a permanent member of the UN Security Council, holds considerable influence within the organization. The UN-China relationship has evolved over the years, shaped by China's rising global power and its aspirations for a more prominent role in international affairs.
China has actively engaged with the UN, contributing to peacekeeping operations, participating in various UN agencies and programs, and providing financial support.
However, the UN-China relationship is not without challenges and criticisms. China's growing influence has raised concerns regarding its human rights record, particularly in relation to issues such as freedom of expression, religious freedom, & minority rights.
Critics argue that China's actions within its own borders, such as the treatment of Uighur Muslims in Xinjiang and the suppression of pro-democracy movements in Hong Kong, are in conflict with the principles and values upheld by the UN.
To know more about United Nations
brainly.com/question/13680618
#SPJ4
Which of the following is responsible for the establishment and maintaining of organizational culture?
a. The culture of an enterprise can be shaped by landmark events in its history
b. All of these are responsible for the establishment and maintaining of organizational culture.
c. Informal rules of behavior that employees are expected to adopt if they want to fit in and succeed within the organization
d. Founders or important leaders can have a profound impact on organizational culture
e. Formal and informal socialization mechanisms
The answer is b. All of these are responsible for the establishment and maintenance of organizational culture.
Organizational culture is a complex and multifaceted concept that is shaped by various factors. It is not solely determined by one specific factor but is influenced by multiple elements working together.
Option b states that all of the given factors are responsible for the establishment and maintenance of organizational culture. This is accurate because organizational culture is formed and sustained through a combination of different factors and influences.
Option A highlights that the culture of an enterprise can be shaped by landmark events in its history. Historical events, such as mergers, acquisitions, or significant achievements, can have a lasting impact on the values, beliefs, and norms within an organization.
Option c emphasizes the importance of informal rules of behavior in shaping organizational culture. These informal rules, often referred to as norms or unwritten codes, guide employees' behavior and contribute to the overall culture of the organization.
Option d recognizes the role of founders or important leaders in influencing organizational culture. The values, vision, and leadership style of the founders or key leaders can significantly shape the culture and set the tone for the entire organization.
Option e acknowledges the significance of both formal and informal socialization mechanisms in establishing and maintaining organizational culture. Formal mechanisms, such as training programs or onboarding processes, as well as informal mechanisms like mentorship and peer interactions, contribute to the socialization of employees into the desired culture.
In conclusion, organizational culture is a result of multiple factors working in conjunction with each other. All of the options provided play a role in the establishment and maintenance of organizational culture, demonstrating the interplay between history, socialization, informal rules, and leadership.
know more about organizational culture.
https://brainly.com/question/6332856
#SPJ11
builtrite bonds have the following: 5 1/2oupon, 10 years until maturity, $1000 par and are currently selling at $1044. if you purchase this bond, what would be your aytm?
By adjusting the YTM value incrementally, we can find the approximate YTM that makes the equation balance. Based on trial and error, the YTM is approximately 5.29%.
To calculate the yield to maturity (YTM) of the Builtrite bonds, we need to consider the coupon rate, time to maturity, and the current market price.
Given:
Coupon rate: 5 1/2%
Years until maturity: 10
Par value: $1000
Current market price: $1044
To calculate the YTM, we can use financial calculators, spreadsheets, or financial software. However, I will provide an approximate calculation using the formula and assumptions.
Assuming the bond pays semi-annual coupons, we calculate the total number of coupon payments over the bond's life as the number of years until maturity multiplied by 2 (for semi-annual payments). In this case, it would be 10 years * 2 = 20 coupon payments.
Next, we calculate the coupon payment amount per period. The coupon rate is 5 1/2%, which can be expressed as 0.055. The coupon payment per period would be 0.055 * $1000 = $55.
To approximate the YTM, we assume that the bond will be held until maturity and that the coupon payments will be reinvested at the same yield. We use the following formula to estimate the YTM:
Market Price = (Coupon Payment / (1 + YTM/2)^1) + (Coupon Payment / (1 + YTM/2)^2) + ... + (Coupon Payment + Par Value / (1 + YTM/2)^n)
Where:
Market Price = $1044 (Current market price)
Coupon Payment = $55 (Coupon payment per period)
YTM = Yield to Maturity (unknown)
n = Number of coupon payments = 20
Using this formula, we need to solve for YTM. It requires an iterative approach or the use of financial calculators/spreadsheets. However, let's make an approximation using trial and error:
Assume an initial YTM value of 5%. Plugging in the numbers:
$1044 = ($55 / (1 + 0.05/2)^1) + ($55 / (1 + 0.05/2)^2) + ... + ($55 + $1000 / (1 + 0.05/2)^20)
By adjusting the YTM value incrementally, we can find the approximate YTM that makes the equation balance. Based on trial and error, the YTM is approximately 5.29%.
To know more about YTM value
https://brainly.com/question/28214826
#SPJ4
8.
What are the ways that an organization can employ to deal with
non-conforming outputs?
Non-conforming outputs refer to products or services that do not meet the prescribed standards for various reasons.
To deal with non-conforming outputs, the following ways can be employed by an organization:
1. Conduct a thorough investigation to identify the root cause of the non-conforming output.
2. Take corrective actions to correct the root cause of the non-conforming output.
3. Document the process of investigation and corrective action to provide a clear understanding of the situation.
4. Ensure that all employees who are involved in the production of the non-conforming output are trained on the corrective action to avoid recurrence.
5. Monitor the process to ensure that the corrective action is effective.
6. Evaluate the impact of the non-conforming output on the customers, suppliers, and other stakeholders.
7. Determine if the non-conforming output can be reworked or repaired to meet the prescribed standards.
8. Discard the non-conforming output if it cannot be reworked or repaired to meet the prescribed standards.
Learn more about Non-conforming outputs,
brainly.com/question/22672210
#SPJ11
1. What is the Predetermined overhead Rate?
2. What is the total manufacturing cost?
3. If Job P includes 20 units, what is the unit product
cost?
4. What is the total manufacturing cost assigned to J
The Foundational 15 (Algo) [LO2-1, LO2-2, LO2-3, LO2-4] [The following information applies to the questions displayed below.) Sweeten Company had no jobs in progress at the beginning of the year and n
The Predetermined Overhead Rate (POR) is a rate used to charge production overheads to items produced. The predetermined overhead rate (POR) is an estimated amount of cost per unit or direct labor hour. It is determined in advance of production and is intended to facilitate the expense allocation process.
It is calculated by dividing estimated manufacturing overhead by estimated activity level. The following formula is used to calculate the predetermined overhead rate:POR = Estimated manufacturing overhead costs / Estimated activity level.
The total manufacturing cost is the sum of direct materials, direct labor, and manufacturing overhead expenses. The formula used to determine total manufacturing costs is as follows:
Total manufacturing cost = Direct materials + Direct labor + Manufacturing overhead.If Job P includes 20 units, the unit product cost would be obtained by adding direct materials, direct labor, and manufacturing overhead per unit.
The following formula is used to determine the unit product cost:Unit product cost = Total manufacturing cost / Total number of units.
Total manufacturing costs assigned to J can be determined by multiplying the number of units produced by the unit product cost. You can substitute the unit product cost into the following formula to determine the total manufacturing cost assigned to Job J: Total manufacturing cost = Unit product cost x Number of units produced.
For more questions on: Predetermined Overhead Rate
https://brainly.com/question/26372929
#SPJ11
Which of the following variables (inputs) into the Black & Scholes Option Pricing Formula are estimated? a. The strike price b. The time remaining until expiration C. The stock price d. The risk free interest rate e. The standard deviation of the stock price. f. All variables are estimated.
f. All variables are estimated in the Black & Scholes Option Pricing Formula.
It is a mathematical model that uses several inputs to calculate the theoretical price of options. The formula is used to determine the fair price for a call or put option, where the exercise price, stock price, time to expiration, risk-free rate, and volatility are all known values.
In options trading, volatility is a measure of the variation of the price of an underlying asset over time. It is typically calculated as the standard deviation of the stock price returns over a certain period. The Black-Scholes model assumes that the stock price follows a lognormal distribution, which means that the standard deviation of the stock price is constant over time.
The formula also assumes that there are no dividends paid out during the life of the option. To use the Black-Scholes model, one needs to input the current stock price, the option's strike price, the time to expiration, the risk-free rate, and the expected volatility. By inputting these variables into the formula, traders and investors can determine the theoretical fair price of the option.
Therefore the correct option is f. All variables are estimated.
Learn more about Black & Scholes Option Pricing Formula:https://brainly.com/question/29243244
#SPJ11
Consider that a festival is performing a serious social
function, and how would it inform the marketing communications.
(150-200 words)
A festival is an event that brings individuals together for a particular purpose. The festival is held to commemorate or celebrate something that is important to people.
Festivals are intended to unite people, foster social connections, and strengthen the community. As a result, festivals play a significant social function. Because of the social function of festivals, it is necessary to use marketing communications that recognize the social aspect of the festival.
How would a festival's social function inform marketing communications?The social aspect of festivals can be used in marketing communications in various ways. One method is to emphasize how the festival unites people of diverse backgrounds and encourages social connections. For instance, the festival could be marketed as a platform for people to meet new people and expand their social circles.
This emphasis on social connection can be useful in attracting people who are seeking to meet new people or engage in social activities. The social function of a festival can also be used in marketing communications to promote social responsibility. The festival can be marketed as a way for people to contribute to society and help others.
In summary, a festival's social function informs marketing communications by emphasizing the social aspect of the festival and using it to promote social connections and social responsibility. This approach can help attract people who are interested in social activities and are motivated by social responsibility.
To know more on marketing visit:
https://brainly.com/question/27155256
#SPJ11
Question
Briefly discuss what the differences are when a manufacturer or
dealer lessor initially recognises a
finance lease compared to a non manufacturer/delear lessor.
The differences between a manufacturer or dealer lessor and a non-manufacturer/dealer lessor in initially recognizing a finance lease relate to revenue recognition, and the level of disclosures provided.
When a manufacturer or dealer lessor initially recognizes a finance lease, there are a few key differences compared to a non-manufacturer/dealer lessor. These differences arise due to the specific nature of the lessor's business and their involvement in the manufacturing or dealing of the leased assets.Revenue recognition: A manufacturer or dealer lessor may recognize revenue at the time of delivery or sale of the leased asset, even if it is on a finance lease. This is because the lessor is actively involved in the sale of assets and can recognize the profit or margin on the sale upfront. In contrast, a non-manufacturer/dealer lessor typically recognizes revenue over the lease term as the rental payments are received.Disclosures: Manufacturer or dealer lessors may provide additional disclosures regarding their involvement in the manufacturing or dealing of leased assets, including the profit earned on sales or disposals. Non-manufacturer/dealer lessors typically do not have these specific disclosures.
For more such questions on finance
https://brainly.com/question/989344
#SPJ11
A mortgage bond with face value of $10,000 has a bond interest rate of 8% per year payable quarterly. What is the amount of the bond interest (1) or interest payment every quarter?
The amount of the bond interest payment every quarter is $200.
What is the quarterly amount of the bond interest payment?The amount of the bond interest payment every quarter, which is $200. To calculate this, we need to consider the face value of the mortgage bond, which is $10,000, and the bond interest rate of 8% per year payable quarterly.
Since the bond interest rate is payable quarterly, we divide the annual interest rate by the number of compounding periods per year, which gives us 2% (8% divided by 4). We then multiply the face value of the bond by the quarterly interest rate to calculate the interest payment per quarter.
In this case, the interest payment per quarter is $10,000 multiplied by 2% (or 0.02), which equals $200.
Therefore, the bond interest payment every quarter for a mortgage bond with a face value of $10,000 and a bond interest rate of 8% per year payable quarterly is $200.
Learn more about payment
brainly.com/question/32320091
#SPJ11
Which AMX builder method is most effective in routing the journals to the Accounting Manager when his subordinate, The General Accountant, enters a journal?
A. Supervisory level approval
B. Cost center based approval
C. Dynamic Approval Groups
D. Management Chain approval
E. Approval Groups
C) It simplifies the procedure for assigning transaction approvals to the appropriate authorities, decreases the approval time, and improves the accuracy of the workflow routing.
The most effective AMX builder method in routing the journals to the Accounting Manager when his subordinate, the General Accountant, enters a journal is Dynamic Approval Groups. AMX builder is a rule-based workflow design tool that comes with AMX BPM. The People Soft Approval Framework is a rules-based, self-service approval system that replaces the hard-coded approval processes in applications. Dynamic approval groups provide an automatic way to determine the appropriate approval level or person to review and approve the transaction based on criteria like amount, department, or region. Therefore, when the General Accountant enters a journal, the workflow rule engine would utilize the Dynamic Approval Group method to determine the appropriate approval level, which is the Accounting Manager. In addition, this method enables the managers to specify their groups' makeup and establish routing policies for approvals. It simplifies the procedure for assigning transaction approvals to the appropriate authorities, decreases the approval time, and improves the accuracy of the workflow routing.
To know more about workflow visit:
https://brainly.com/question/31601855
#SPJ11
Suppose the interest rate is 9.7% APR with monthly compounding. What is the present value of an annuity that pays $105 every six months for six years? (Note: Be careful not to round any intermediate steps less than six decimal places.) The present value of the annuity is S (Round to the nearest cent.)
The present value of the annuity is $986.08 (rounded to the nearest cent).Given that the interest rate is 9.7% APR with monthly compounding. We need to find the present value of an annuity that pays $105 every six months for six years.
To find the present value of the annuity, we use the formula given below:
PV = PMT × [1 - 1 / (1 + r)n] / r Where, PV is the present value of the annuity
PMT is the amount of each payment r is the interest rate per period n is the total number of periods.
The interest rate is given at APR, i.e., annual percentage rate. But since the compounding is monthly, we need to find the monthly interest rate, r.We have,A = P(1 + r / n)nt
Here, A = 1 + r, n = 12, and t = 1 year
Let's solve for r.A = P(1 + r / n)nt A / P = (1 + r / n)nt[ A / P ] 1 / nt = 1 + r / n( A / P )1 / nt - 1 = r / n( A / P )1 / nt - 1 = r / 12( 1.097 )1 / 12 - 1 = r / 12r = 0.007751... = 0.00775 (approx)
Now, we have:r = 0.00775PMT = $105n = 2 × 6 = 12PV = PMT × [1 - 1 / (1 + r)n] / rPV = 105 × [1 - 1 / (1 + 0.00775)¹²] / 0.00775PV = 986.08.
Therefore, the present value of the annuity is $986.08 (rounded to the nearest cent).
For more question on annuity
https://brainly.com/question/14908942
#SPJ11
In 2015, the output of country X is $ 200bn and its population is 265 million. Using this information answer the following questions a. Compute the GDP per capita
In 2015, the output of country X is $ 200bn and its population is 265 million. The GDP per capita of country X in 2015 was $ 754.71.
Gross Domestic Product (GDP) is the total monetary value of all the finished goods and services produced within a country's borders in a given time period. GDP per capita is a measure that determines the economic output of a country by dividing the GDP of a country by its total population.
Therefore, to compute the GDP per capita of country X in 2015, the GDP of the country has to be divided by its population.
Here is the calculation:
GDP per capita = GDP / population
= $ 200bn / 265 million
= $ 754.71
Therefore, the GDP per capita of country X in 2015 was $ 754.71.
It is important to note that GDP per capita is a significant measure that is used to determine the economic output and the standard of living of a country's population. A higher GDP per capita implies that the country is producing more goods and services, which could result in a higher standard of living for the population.
To know more about Gross Domestic Product refer to:
https://brainly.com/question/1383956
#SPJ11
assume that the cross-price elasticity of demand for good x with respect to the price of good y is 0.2. based on this we can say that goods x and y are
Based on the given cross-price elasticity of demand, which is positive and less than 1 (0.2), we can say that goods X and Y are substitute goods.
When the cross-price elasticity of demand between two goods is positive, it indicates that an increase in the price of one good leads to an increase in the demand for the other good. In this case, an increase in the price of good Y would result in a relatively smaller increase in the demand for good X.
This suggests that the two goods, X and Y, are substitutes. When the price of one good increases, consumers are likely to shift their consumption towards the other good, which is relatively cheaper. The positive but relatively low value of 0.2 indicates a moderate degree of substitutability between the two goods. Therefore, the correct answer is that goods X and Y are substitute goods.
Visit here to learn more about cross-price elasticity:
brainly.com/question/30402460
#SPJ11
sells external hard drives for $288 each. Its total fixed costs are $45 million, and its variable costs per unit are $173. The tax rate is 41% if the economy is strong, the firm will sell 2 million drives, but if there is a recession, it will sell only half as will be the percentage decline in sales if the economy enters a recession? (Negative value should be indicated by a minus sign. Round your answer to 2 decimal places.) b. What will be the percentage decline in profits if the economy enters a recession? (Negative value should be indicated by a minus sign. Round your answer to 2 decimal places.) Percentage decline in profits c. Calculate the operating leverage of this firm? (Round your answer to 2 decimal places.) DOL
a. The percentage decline in sales is 50.00%.
b. The decline in profit 62.19%
c. The Degree of Operating Leverage (DOL) is 1.24.
How to solve for the sales declinea. The decline in sales will be
(2 million - 1 million) / 2 million
= 50%.
So, the percentage decline in sales is 50.00%.
b. Total Revenue
= $288 * 2 million
= $576 million
Total Cost
= $45 million + $173 * 2 million
= $45 million + $346 million
= $391 million
Profit before tax
= Total Revenue - Total Cost
= $576 million - $391 million = $185 million
Profit after tax
= Profit before tax * (1 - tax rate)
= $185 million * (1 - 0.41)
= $109.15 million
In a recession:
Total Revenue
= $288 * 1 million
= $288 million
Total Cost
= $45 million + $173 * 1 million
= $45 million + $173 million
= $218 million
Profit before tax
= Total Revenue - Total Cost
= $288 million - $218 million
= $70 million
Profit after tax
= Profit before tax * (1 - tax rate)
= $70 million * (1 - 0.41) = $41.3 million
The decline in profit will be ($109.15 million - $41.3 million) / $109.15 million
= 0.6219 or 62.19%
The decline in profit 62.19%
c. Operating Leverage = Contribution Margin / Profit before tax = $230 million / $185 million = 1.24
So, the Degree of Operating Leverage (DOL) is 1.24.
Read more on recession here https://brainly.com/question/20597683
#SPJ4
A company’s free cash flow was just FCF0 = $1.50 million. The weighted average cost of capital is WACC = 10.1%, and the constant growth rate is g = 4.0%. What is the current value of operations?
Please explain in detail how you arrive at the answer.
The current value of operations is approximately $25.57 million.
To calculate the current value of operations, we can use the free cash flow to the firm (FCFF) valuation model, which takes into account the free cash flow, the weighted average cost of capital (WACC), and the growth rate.
The formula for calculating the current value of operations using the FCFF model is:
Current Value of Operations = FCFF1 / (WACC - g)
Where:
FCFF1 represents the expected free cash flow to the firm in the next period.
WACC is the weighted average cost of capital.
g is the constant growth rate.
In this case, we are given:
FCF0 = $1.50 million (the initial free cash flow)
WACC = 10.1% (the weighted average cost of capital)
g = 4.0% (the constant growth rate)
To find the FCFF1, we can use the constant growth rate formula:
FCFF1 = FCF0 * (1 + g)
Plugging in the given values:
FCFF1 = $1.50 million * (1 + 0.04)
FCFF1 = $1.50 million * 1.04
FCFF1 = $1.56 million
Now we can substitute the values into the formula to find the current value of operations:
Current Value of Operations = $1.56 million / (0.101 - 0.04)
Current Value of Operations = $1.56 million / 0.061
Current Value of Operations ≈ $25.57 million
Therefore, the current value of operations is approximately $25.57 million.
To know more about .capital here:-
https://brainly.com/question/26339998
#SPJ4
Suppose that the demand for real money balances depends on disposable income. That is, the money demand function is M/P= L(r, Y-T). Using the IS-LM model, discuss whether this change in the money demand function alters the following:
a. The analysis of changes in government purchases.
b. The analysis of changes in taxes.
In the IS-LM model, the change in the money demand function affects the analysis of changes in government purchases and taxes as follows:
a. The analysis of changes in government purchasesThe analysis of changes in government purchases in the IS-LM model is based on the relationship between government spending and interest rates, as well as the effect of government spending on aggregate demand. In the model, an increase in government spending shifts the IS curve to the right, resulting in higher output and interest rates.
However, with the given money demand function, an increase in disposable income would increase the demand for real money balances, leading to an increase in interest rates, which would shift the LM curve upwards. As a result, the impact of government spending on output and interest rates would be reduced.
b. The analysis of changes in taxesThe analysis of changes in taxes in the IS-LM model is based on the relationship between taxes and disposable income, as well as the effect of taxes on aggregate demand. In the model, a decrease in taxes shifts the IS curve to the right, resulting in higher output and lower interest rates.
However, with the given money demand function, a decrease in taxes would increase disposable income, which would increase the demand for real money balances, leading to an increase in interest rates and shifting the LM curve upwards. As a result, the impact of taxes on output and interest rates would be reduced.
For more questions on: IS-LM model
https://brainly.com/question/15310574
#SPJ11
Suppose the quantity demanded of good X (Qd) depends only on the price of good X (P), monthly income (M), and the price of a related good R (PR) and M is $80,000 and PR is $100:
Qd = 30,000 −1,000P + 0.25M + 5PR
Qs = −10,000 + 2,000/3P
Total consumer surplus in equilibrium is _____. Total producer surplus in equilibrium is ______. The net gain to society created by the market for good X is ______
Where the above conditions are given,
Total consumer surplus in equilibrium $6,084,675
Total producer surplus in equilibrium - $6,084,675
Net gain to society created by the market for good X - $12,169,350
How is this so?Given -
Qd = 30,000 - 1,000P + 0.25M + 5PR
Qs = -10,000 + (2,000/3)P
M = $80,000
PR = $100
Equating Qd and Qs -
30,000 - 1,000P + 0.25M + 5PR = -10,000 + (2,000/3)P
30,000 - 1,000P + 0.25(80,000) + 5(100) = -10,000 + (2,000/3)P
30,000 - 1,000P + 20,000 + 500 = -10,000 + (2,000/3)P
50,500 - 1,000P = -10,000 + (2,000/3)P
50,500 = (2,000/3)P - 1,000P
151,500 = 2,000P - 3,000P
151,500 = -1,000P
P = -151.5
Since price cannot be negative, we disregard the negative value.
The equilibrium price is P = $151.50.
2) the quantity demanded equation
Qd = 30,000 - 1,000P + 0.25M + 5PR
Qd = 30,000 - 1,000(151.50) + 0.25(80,000) + 5(100)
Qd = 30,000 - 151,500 + 20,000 + 500
Qd = -101,000 + 20,500
Qd = -80,500
Since quantity cannot be negative, we disregard the negative value.
The equilibrium quantity is Q = 80,500.
3) Total consumer surplus = (1/2) * (Equilibrium Quantity) * (Equilibrium Price)
Total consumer surplus = (1/2) * 80,500 * 151.50
= $6,084,675
Total producer surplus = (1/2) * 80,500 * 151.50
= $6,084,675
Net gain to society = Total consumer surplus + Total producer surplus
Net gain to society = $6,084,675 + $6,084,675
= $12,169,350
Learn more about equilibrium at:
https://brainly.com/question/517289
#SPJ1
Your assistant gives you the following diagram as the efficient frontier of the group of stocks you asked him to analyze. The diagram looks a bit odd, but your assistant insists he double-checked his analysis. Expected return Standard deviation Required: a. Would you trust him? O Yes O No b. Is it possible to get such a diagram? O Yes Ο Nο
a. No, I would not trust him. The efficient frontier is a graphical representation of the optimal portfolio combinations that provide the highest expected return for a given level of risk. The efficient frontier typically appears as a smooth curve, not an odd-looking diagram. The fact that the diagram looks unusual raises concerns about the accuracy of the analysis. I would request additional explanation and verification from the assistant before trusting the results.
b. No, it is not possible to get such a diagram. The efficient frontier, as mentioned earlier, is expected to be a smooth curve that shows the trade-off between expected return and standard deviation (a measure of risk). An odd-looking diagram would suggest a flawed analysis or inaccurate data. It is important to review the analysis process, data inputs, and calculations to identify any potential errors. Obtaining an unusual diagram raises doubts about the validity and reliability of the analysis.
Learn more about portfolio
brainly.com/question/17165367
#SPJ11
A plaintiff who sues in tort must prove each of the elements of the tort. Review the torts below, along with their elements, and compare them to the information contained your Business Law in Canada textbook. One of the torts below is not matched correctly to its elements. Identify the tort which is INCORRECTLY matched to its elements. Select one: a. Deceit: negligently misleading another person and causing damage. b. False imprisonment: deliberate restraint; lack of lawful authority. c. Intimidation: forcing a party to do something that harms it using the threat of violence or some other illegal activity. d. Passing off: the existence of goodwill associated with the plaintiff's product; deception of the public due to a misrepresentation; and, actual or potential damage.
The tort that is INCORRECTLY matched to its elements is: a. Deceit: negligently misleading another person and causing damage.
Deceit, also known as fraudulent misrepresentation, requires proof of the following elements:
A false representation made by the defendant.Knowledge or reckless disregard of the falsity of the representation by the defendant.Intent to induce the plaintiff to act in reliance on the false representation.Actual reliance on the false representation by the plaintiff.Damages suffered by the plaintiff as a result of the reliance.The given description for deceit in option a is not accurate. Deceit requires an intentional false representation or a reckless disregard for the truth, rather than mere negligence. It is necessary to show that the defendant deliberately misled the plaintiff, knowing that the information provided was false.
Therefore, option a, which states that deceit involves negligently misleading another person and causing damage, is the tort that is INCORRECTLY matched to its elements. Deceit requires a higher standard of intent and knowledge, rather than mere negligence.
To learn more about Business Law, here
https://brainly.com/question/32247962
#SPJ4
which market is used to trade cotton, natural gas, and silver?
Cotton, natural gas, and silver are all traded on various commodity exchanges around the world. Some of the major exchanges include the New York Mercantile Exchange (NYMEX), the Intercontinental Exchange (ICE), and the Chicago Mercantile Exchange (CME).
Each of these exchanges specializes in different types of commodities.NYMEX is a commodity futures exchange that specializes in energy products, including crude oil, natural gas, and heating oil. NYMEX also offers futures contracts on metals such as gold, silver, and copper. On the other hand, ICE is an electronic futures and derivatives exchange that specializes in energy commodities, including crude oil, natural gas, and power.
ICE also offers futures contracts on soft commodities like sugar, cocoa, and coffee.CME, the world's largest futures exchange, specializes in a wide range of commodities, including agriculture, energy, metals, and financial products. CME offers a variety of futures contracts on agricultural commodities, including corn, soybeans, and wheat. It also offers futures contracts on livestock, metals, and energy products.The COMEX division of CME Group is the primary exchange for trading metals, including gold, silver, and copper.
In conclusion, the NYMEX, ICE, and CME are some of the world's major commodity exchanges used to trade cotton, natural gas, and silver, along with other commodities.
To know more about Intercontinental Exchange visit :
https://brainly.com/question/30640490
#SPJ11
Your organization is using a legacy application for vendor management that was developed by a local IT my, and which u company, and which was subsequently modified a multiple times. Now the local IT company is not in a position to support this application and as such your company's IT department is considering taking control of sition to the maintenance and support of the software. As a project lead, identify and justify if you would reverse [6 marks] engineer the application or redesign the same from scratch. Detail your approach in either case.
Reverse engineer for preservation, optimization, and risk mitigation.
What is Reverse engineer or redesign? Justify.As the project lead, I would recommend reverse engineering the application for vendor management rather than redesigning it from scratch. Reverse engineering involves analyzing the existing application's code, structure, and functionality to gain a comprehensive understanding of its inner workings.
By reverse engineering, we can:
Understand the existing system: This allows us to identify the application's core functionality, business rules, and dependencies.Identify areas for improvement: We can pinpoint any weaknesses or limitations in the current system, enabling us to address them during maintenance and support.Preserve existing functionality: Reverse engineering ensures that we retain the existing application's features and functionalities, avoiding potential disruptions or loss of critical business processes.Optimize maintenance efforts: With a thorough understanding of the codebase, we can streamline the maintenance and support process, reducing time and effort required for bug fixes and enhancements.Mitigate risks: Redesigning the application from scratch introduces higher risks, such as potential compatibility issues, data loss, and extended development time. Reverse engineering minimizes these risks by leveraging the existing working system.Overall, reverse engineering the application allows us to make informed decisions, optimize maintenance efforts, and mitigate risks associated with a complete redesign.
Learn more about application
brainly.com/question/29039611
#SPJ11
A company issues $25.000.000, 7.8%. 20-year bonds to yield 8% on January 1, 2017. Interest is paid on June 30 and December 31. The proceeds from the bonds are $24.505,180. Using effective-interest amortization, what will the carrying value of the bonds be on the December 31, 2017 balance sheet? a) $24,515,802. b) $24,510,385. c) $24,531,405. d) $25,000,000.
The proceeds from the issuance of the bond are $24.505,180. The face value of the bond is $25.000.000. The difference between the face value and the proceeds from the issuance of the bond is $25,000,000 - $24.505,180 = $494,820. This $494,820 is known as the bond discount.
The effective-interest amortization method is used to compute interest expense on the bond. It provides a more accurate amount of interest expense by using a periodic interest rate that reflects the actual yield the company receives from the bond.The interest expense incurred each period is determined by multiplying the carrying value of the bond at the beginning of the period by the effective interest rate for the period.
The effective interest rate is equal to the annual market rate (8%) divided by the number of payment periods per year (2). Therefore, the effective interest rate is 4%.For the year ended December 31, 2017, the carrying value of the bond will be calculated as follows: Beginning Carrying Value
= Proceeds from issuance of bond – Bond discount= $24.505,180 – $494,820= $24,010,360Interest Expense for the year = Beginning Carrying Value * Effective Interest Rate= $24,010,360 * 4%= $960,414Carrying Value at December 31, 2017 = Beginning Carrying Value + Interest Expense for the year= $24,010,360 + $960,414= $24,970,774Therefore, the correct option is a) $24,515,802. The carrying value of the bonds on December 31, 2017 balance sheet will be $24,970,774.
To know more about issuance visit :
https://brainly.com/question/32104787
#SPJ11
what efforts should digital leaders prioritize in order to support 's ai?build highly specified silos within their organization to allow for specialization and multiple budget owners.create firm budget processes to solidify digital marketing as an organization's cost center.build capabilities in key areas such as high-quality data and a skilled workforce.coach teams to avoid experimentation in order to eliminate risk and keep performance stable year-over-year.
AI is an ever-expanding field with the potential to transform the digital landscape.
Digital leaders should prioritize building capabilities in key areas such as high-quality data and a skilled workforce in order to support AI. These capabilities will help them remain competitive and stay ahead of the curve in a rapidly changing digital environment. Additionally, they should create firm budget processes to solidify digital marketing as an organization's cost center.
This will help ensure that they have the resources they need to invest in the development of new AI technologies and applications. Finally, they should coach teams to avoid experimentation in order to eliminate risk and keep performance stable year-over-year. While experimentation is important in some areas, it can be costly and risky when it comes to AI.
To know more about landscape visit:-
https://brainly.com/question/32700169
#SPJ11