Answer:
The current needed is 2625.72 A.
Explanation:
Given;
magnetic field strength, B = 1.5 T
length of the solenoid, L = 1.8 m
diameter of the solenoid, d = 75 cm
The number of turns is given by;
[tex]N = \frac{Length \ of solenoid }{diameter \ of wire}\\\\N = \frac{1.8}{2.2*10^{-3}} = 818.18 \ turns[/tex]
The magnetic field is given by;
[tex]B = \frac{\mu_o NI}{l}[/tex]
where;
I is the current needed
[tex]I = \frac{Bl}{\mu_o N} \\\\I = \frac{(1.5)(1.8)}{(4\pi*10^{-7})(818.18)} \\\\I = 2625.72 \ A[/tex]
Therefore, the current needed is 2625.72 A.
If the sound source is moving then the pitch of the sound will ___________________ to the observer.
Answer:
Increase
Explanation:
The frequency of sound determines the sound. If the frequency is lower the pitch will be lower. If the frequency is higher the pitch will be higher. This is affected by the motion of the sound source because when a sound source is moving faster the frequency will become higher.
The frequency of an electromagnetic wave is 1.0 x 105 Hz. Calculate the wavelength in meters. Show your work,
and be sure to keep track of the units.
Answer:
wavelength = 3000 m
Explanation:
We use the formula for the relationship between the speed (c), frequency (v), and wavelength [tex](\lambda)[/tex]:
[tex]c=\lambda\,*\,\nu\\300000000 \,\,m/s = \lambda\,*100000 \,\,1/s\\\lambda \,=\,3000\,\,m[/tex]
A boy pulls his 9.0 kg sled, applying a horizontal force of 14.0 N (rightward). The coefficient of friction between the snow and the sled is 0.12. Determine the net force and the acceleration of the sled. Draw a free-body diagram for the sled; use appropriate force symbols to label the type of each force acting on the sled.
Here is the answer, dud
A red blood cell contains 4.8 107 free electrons. What is the total charge of these electrons in the red blood cell?
Answer:
Charge, [tex]q=7.68\times 10^{-12}\ C[/tex]
Explanation:
It is given that,
The number of electron in a RBCs, [tex]n=4.8\times 10^7[/tex]
We need to find the total charge of these electrons in the red blood cell. Let it is q. Using the quantization of charge as follows :
q = ne
e is the change on electron
[tex]q=4.8\times 10^7\times 1.6\times 10^{-19}\\\\q=7.68\times 10^{-12}\ C[/tex]
So, the net charge is [tex]7.68\times 10^{-12}\ C[/tex].
hii i need these answers please!! as soon as possible and if you can’t see anything jus let me know and ill tell you what it says
Answer:
Explanation:
CANT SEE ITS TOO PIXELATED
A cannonball is fired straight up at a speed of 25 m/s. What is the maximum altitude that it will reach?
Answer:
When the projectile is launched straight up, there isn't a horizontal ... The initial acceleration was 9.8 m/s2 pointing up, so the acceleration at any other point should be the same.
Explanation:
Hope it helped =)
The maximum altitude that the cannonball will reach if fired straight up at a speed of 25 m/s is; 31.86 m
According to the question;
The cannonball is fired straight up at a speed of 25 m/s
Additionally, the cannonball is fired against the force of gravity.
Consequently, the motion is in the opposite direction of the acceleration due to gravity.
From the equation of motion;
V² = U² - 2gHAt the maximum altitude, V = 0.
0² = 25² - (2× 9.81) H19.62H = 625H = 625/19.62H = 31.86mThe maximum altitude that it will reach is;
H = 31.86mRead more:
https://brainly.com/question/20352766
Which type of force is the weakest?
The correct option is A i.e. Van der Waals forces.
what is Van der Waals forces?
Van der Waals forces are weak intermolecular forces that are depending on atom or molecule distance. Interactions between uncharged atoms/molecules produce these forces.
The variation in the polarizations of two particles close to each other can produce Van der Waals forces.Van der Waals forces are substantially weaker than covalent and ionic bonding.The Van der Waals forces are additive in nature, consisting of multiple distinct interactions.These forces are inexhaustible.These forces have no discernible directional characteristics.They aren't affected by temperature (except dipole-dipole interactions)Short-range forces are Van der Waals forces. When the atoms/molecules in question are near together, their magnitude is large.To know more about Van der Waals forces here
https://brainly.com/question/13201335
#SPJ2
An airplane with a mass of 5,000 kg needs to accelerate 5 m/s2 to take off before it reaches the end of the runway. How much force is needed from the engine
Answer:
25000 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 5000 × 5
We have the final answer as
25000 NHope this helps you
Which physical activity is NOT aerobic exercise?
A) Hip-hop dancing
B) Jump roping
C) Yoga
D) Jogging
Answer:
C
Explanation:
Answer:
Hip-hop Dancing
Explanation:
Aerobic exercises are light (somewhat, a more accurate word would be bearable) workouts that you can endure over long periods of time. Anaerobic workouts describe workouts that require sudden burst of energy, like the ones you seen in most forms of dance, such as Hip-hop dance.
Hope this helps!
1) An object travels 15 m in 3 s. What is its' speed?
Answer:
5m/s
Explanation:
Distance/Time= Speed
D/T=S
15/3=S
5=S
A 25 kg child is sitting at the top of a 4 m tall slide, what is his potential energy?
An engineer measures the velocity of a remote-controlled cart on a straight track at regular time intervals. The data are shown in the graph above. During which of the following time intervals did the cart return to its position at time t=0 s?
A. 7 s ≤ t < 10 s
B. 10 s ≤ t < 12 s
C. 5 s ≤ t < 6 s
D. 3 s ≤ t < 5 s
Answer:
A. 7 s ≤ t < 10 s
Explanation:
From Definite Integral Theory and Mechanical Physics we remember that change in position is represented by sum of areas below the curve. According to the graphic, we see that the following condition must be satisfied:
[tex]A_{1}+A_{2} = 0[/tex] (1)
Where:
[tex]A_{1}[/tex] - Change in position from [tex]t = 0\,s[/tex] and [tex]t = 3\,s[/tex], measured in meters.
[tex]A_{2}[/tex] - Change in position from [tex]t = 5\,s[/tex] and [tex]t = T[/tex], measured in meters.
By definitions of triangle, we expand the equation above:
[tex]\frac{1}{2}\cdot (3\,s)\cdot \left(1.2\,\frac{m}{s} \right) -\frac{1}{2}\cdot (T-5\,s)\cdot v = 0\,m[/tex]
[tex]1.8\,m-0.5\cdot T \cdot v +2.5\cdot v = 0[/tex]
And the time is now cleared:
[tex]1.8\,m+2.5\cdot v = 0.5\cdot T\cdot v[/tex]
[tex]T = \frac{1.8+2.5\cdot v}{0.5\cdot v}[/tex]
Where:
[tex]v[/tex] - Final velocity of the cart, measured in meters per second.
[tex]T[/tex] - Time, measured in seconds.
If we know that [tex]v = 1\,\frac{m}{s}[/tex], then the intended instant is:
[tex]T = \frac{1.8+2.5\cdot (1)}{0.5\cdot (1)}[/tex]
[tex]T = 8.6\,s[/tex]
The value does not coincide with the time from the graph.
If we know that [tex]v = 1.5\,\frac{m}{s}[/tex], then the intended instant is:
[tex]T = \frac{1.8+2.5\cdot (1.5)}{0.5\cdot (1.5)}[/tex]
[tex]T = 7.4\,s[/tex]
This value does not coincide with the time from the graph.
If we know that [tex]v = 1.1\,\frac{m}{s}[/tex], then the intended instant is:
[tex]T = \frac{1.8+2.5\cdot (1.1)}{0.5\cdot (1.1)}[/tex]
[tex]T = 8.273\,s[/tex]
This results offer a reasonable approximation, which that the correct answer is A.
The car will return to its position at the time interval of 7 s ≤ t < 10 s. Hence, option (A) is correct.
The change in position is represented by sum of areas below the curve. According to the graphic, we see that the following condition must be satisfied:
A + A' = 0 ..................................................(1)
A is the change in position from t = 0 and t = 3 s, measured in metres.
A' is the change in position from t = 5 and t = T s, measured in metres.
As per the triangle law,
1/2 ×(3 s)(1.2) - 1/2 ×(T - 5)v = 0
1.8 - 0.5T(v) +2.5(v) =0
T = (1.8 + 2.5v)/ (0.5v)
Here, v is the final velocity of cart.
For v = 1 m/s, we have,
T = (1.8 + 2.5(1))/ (0.5(1))
T = 8.6 s
Since, the values do not coincide with the time from the graph, so taking another value, v = 1.5 m/s to obtain the time as,
T = (1.8 + 2.5(1.5))/ (0.5(1.5))
T = 7.4 s
This value does not coincide with the time from the graph. If we know that , v = 1.1 m/s, then the intended instant is:
T = (1.8 + 2.5(1.1))/ (0.5(1.1))
T = 8.273 s
Thus, we can conclude that the car will return to its position at the time interval of 7 s ≤ t < 10 s. Hence, option (A) is correct.
Learn more about the speed-time graph here:
https://brainly.com/question/19375328
What is the relationship between lightning and atoms?
A. Electrons colliding in the air create lightning
B. The nucleus of atoms colliding creates an atom
C. Lightning is made of atoms
D. Lightning is created by the collision of protons
Answer:
C. Lighting is made of atoms
Explanation:
Everything is made of atoms that are, in turn, made out of charged particles. All charged particles come in one of two types: positive and negative (or plus and minus). The minus particles are the electrons, and the plus particles are the much heavier protons which are buried deep in the nucleus.
what is the difference of dispersed phase and continuous phase?
Answer:
The phase existing as small droplets is called the dispersed phase and the surrounding liquid is known as the continuous phase. Emulsions are commonly classified as oil-in-water (O/W) or water-in-oil (W/O) depending on whether the continuous phase is water or oil.
Explanation:
The difference between a law and a theory is the diffrence between what and why . Explain
Answer:
A law is defined as a description or a statement given after an observed phenomenon. A theory is a simplification of certain observational data as to how and why it happened.
Explanation:
I hope this helped solve your question.
anybody wanna play among us?
Answer:
yess
Explanation:
Answer:
yes me
mark me brainliestA Carnot engine takes in heat at a temperature of 790 K and releases heat to a reservoir at a temperature of 470 K. What is its efficiency?
Answer: 1280 kilometers :D
Explanation:
790 K ' 470 K = 1280 KM (KILOMETERS)
Answer:
GIVE DIS GUY BRAINLIST
Explanation:
It the same child has a velocity of 2 m/s half-way down the slide, what is his kinetic energy?
Answer:
[tex] \frac{1}{2} \times m \times {v}^{2} \\ \frac{1}{2} \times m \times {2}^{2} \\ 2 \times m[/tex]
I dont the child mass...you should substitute that value to (m)
then you can get your answer
During a football workout, two linemen are pushing the coach on the sled. The
combined mass of the sled and the coach is 300 kg. The coefficient of friction between
the sled and the grass is 0.800. The sled accelerates at the rate of 0.580 m/s^2.
Determine the force applied to the sled by the lineman.
Answer:
F_{players} = 2528.4[N]
Explanation:
To solve this problem we must use Newton's second law, which tells us that the sum of forces on a body must be equal to the product of mass by acceleration.
On the sled act two forces, the force of friction and The Force executed by the football players.
The movement of the football players will be taken as positive, while the friction will be taken as negative, since it is opposed to the movement of the sled.
ΣF = m*a
where:
F = force [N]
m = mass [kg]
a = acceleration = 0.580 [m/s²]
[tex]F_{players} - f_{friction} = m*a[/tex]
The friction force is defected as the coefficient of friction by the normal force, the normal force on a horizontal surface can be calculated as the product of mass by gravitational acceleration.
[tex]f_{friction}=0.8*(300*9.81)\\f_{friction}=2354.4[N][/tex]
Now we can calculate the force exerted by the players.
[tex]F_{players}-2354.5=300*0.580\\F_{players}=2528.4[N][/tex]
Try to move the magnet back and forth between the two coils. Explain the motion of the magnet and what might be causing this.
Answer:
Please find the answer in the explanation.
Explanation:
When you try to move the magnet back and forth between the two coils, the motion of the magnet will be oscillatory and this action will cause current and EMF to induce
According to law of Faraday, current or EMF will be induced when a magnet is moved in the presence of coils
If the magnet continues to move back and forth between the two coils, what might be causing this will be the presence of the induced electromagnetic force between the two coils.
A cannonball is launched diagonally with an initial horizontal speed of 51.0m/s
and an initial vertical speed of 24.0m/s. Label the hypotenuse, opposite side and
adjacent side, and determine all unknowns.
m/s
initial speed:
initial horizontal speed:
initial vertical speed:
m/s
m/s
At what angle () was the cannonball launched?
• initial horizontal speed: 51.0 m/s
• initial vertical speed: 24.0 m/s
• initial speed: √((51.0 m/s)² + (24.0 m/s)²) ≈ 56.4 m/s
• angle: tan(θ) = (24.0 m/s) / (51.0 m/s) → θ ≈ 25.2º
Using Pythagoras, the initial speed and the launch angle of the cannon ball are 56.36 m/s and 25.20° respectively.
The initial speed can be obtained using length of the diagonal :
v² = 51² + 24²
v² = 2025
v = √3177
v = 56.36 m/s
The launch angle, θ :
Tanθ = opposite / Adjacentθ = tan¯¹(24/51)
θ = tan¯¹(0.4705)
θ = 25.20°
Hence, the angle of launch is 25.20°
Learn more : https://brainly.com/question/18766174
Why do I feel so sad? I'm not sure if its depression, because i will be fine not happy, but fine all day than randomly in the day I will start to feel sad. I've tried to take my life twice before the past few monthes
You are most likely going through depression. I think you should talk to someone, it could help or try talking to one of us on brainly. I hope you feel better eventually. Your life is valuable try and realize that.
Answer:
You don't need a reason to be sad. It sound as though you are suffering from depression. I understand that. Last year I thought about taking my life, but my parents found out how I was feeling and have been so supportive. Something My mom said that really got to me was, if you killed yourself, who would find you. For me it would have been my little sister. I would have scared her for life. I have come a long way since then, I am doing family therapy, as well as persona, therapy. If you are feeling sad, there is a hotline you can text rather than call. Let them talk you out of it. They won't call anyone if you don't ask them to. Talking to a complete stranger helps, they don't know anything about you so they can't judge you. Also try listening to music, find an artist that you can relate to. For me I like listening to NF when I am feeling down. It helps.
An ideal transformer has 60 turns in its primary coil and 360 turns in its secondary coil. If the input rms voltage for the 60-turn coil is 120 V, what is the output rms voltage of the secondary coil
a. 240 V
b. 720 V
c. 360 V
d. 480 V
e. 20 V
Answer:
720 V
Explanation:
Given that,
The number of turns in primary coil, N₁ = 60
The number of turns in secondary coil, N₂ = 360
The input rms voltage, V₁ = 120 V
We need to find the output rms voltage of the secondary coil . The relation between number of turns in primary coil - secondary coil to the input rms voltage to the output rms voltage is given by :
[tex]\dfrac{N_1}{N_2}=\dfrac{V_1}{V_2}\\\\V_2=\dfrac{N_2V_1}{N_2}\\\\V_2=\dfrac{360\times 120}{60}\\\\V_2=720\ V[/tex]
So, the output rms voltage of the secondary coil is 720 V. Hence, the correct option is (b).Maria wrote the following steps in the formation of igneous rocks. Step 1: Rocks pushed under Earth due to movement of tectonic plate Step 2: Rocks melt Step 3: Molten rocks are heated Step 4: Rocks solidify Which step contains an error?
Answer:
Step 1: Rocks pushed under Earth due to movement of tectonic plate
Step 2: Molten rocks are heated
Step 3: Rocks melt
Step 4: Rocks solidify
Explanation:
Step 1: Rocks pushed under Earth due to movement of tectonic plate
Step 2: Rocks melt
Step 3: Molten rocks are heated
Step 4: Rocks solidify
In the formation of igneous rocks, rocks are pushed under the earth due to the movement of tectonic plate.
As the rocks are pulled beneath the crust, they are heated and begin to melt to form magma.
Then, with time, the magma solidify to form an igneous rock.
Step 2 is wrong.
Step 3 should come first
Step 1: Rocks pushed under Earth due to movement of tectonic plate
Step 2: Molten rocks are heated
Step 3: Rocks melt
Step 4: Rocks solidify
What is the mass, in kg, of a 136 pound gymnast on Earth?
Answer:
61.6886 kg
Explanation:
Answer:
61 kg
Explanation:
there ya go hope this was useful
The towel has better blank
than that towel.
A.duplication
B.formation
C.qualification
D.absorption
Answer:
D
Explanation:
Towels Absorb
1.
How does centripetal force due to gravity keep a satellite in orbit?
It continuously changes the direction of the satellite.
It provides the thrust to launch the satellite into space.
It prevents the satellite from falling toward Earth.
It keeps increasing the speed of the satellite.
Answer:
1st one,.
It changes the direction,
And satellite falls in earth infinity,
Its total workdone is zero
Answer:
It continuously changes the direction of the satellite.
Explanation:
our Welcome (; (:
A ferris wheel with radius 12 m makes a revolution every 3 minutes. Find the linear (tangental) speed of a passenger. How far does a person move in a 5 minute ride?
Answer:
The linear (tangential) speed of a passenger is 0.4188 m/s
The distance traveled by the person in 5 minutes ride is 125.64 m
Explanation:
Given;
radius of the Ferris, r = 12 m
1 revolution per 3 minutes, [tex]\omega = \frac{2\pi (radian)}{3\ (minutes)} *\frac{1\ minute}{60 \ seconds} = 0.0349 \ rad/s[/tex]
The linear (tangential) speed of a passenger is given by;
v = ωr
v = (0.0349)(12)
v = 0.4188 m/s
The distance traveled by the person in 5 minutes ride is given by;
d = vt
d = (0.4188)(5 x 60)
d = 125.64 m
Block A of 15kg of the figure below slides on a surface where the coefficient of kinetic friction is uk=0.3. The block moves at 10m/s when it is s=4m from a second 10kg B block, initially at rest. Considering this situation, determine what will be the maximum compression of the spring, initially decompressed, after the collision if the coefficient of return between the blocks is e=0.6. Tip here, as the blocks are subject to friction forces, use the equation that relates mechanical energy and the work done by non-conservative forces.
Answer:
0.287 m
Explanation:
The velocity of block A when it reaches block B is:
KE₀ = KE + W
½ mv₀² = ½ mv² + Fd
½ mv₀² = ½ mv² + mg μ d
v₀² = v² + 2g μ d
v² = v₀² − 2g μ d
v² = (10 m/s)² − 2 (9.8 m/s²) (0.3) (4 m)
v = 8.75 m/s
The coefficient of restitution is 0.6, so the relative velocity between A and B after the collision is:
e = |Δv after| / |Δv before|
0.6 = Δv / (8.75 m/s)
Δv = 5.25 m/s
Momentum is conserved, so the speed of block B after the collision is:
m₁ u₁ + m₂ u₂ = m₁ v₁ + m₂ v₂
(15 kg) (8.75 m/s) + (10 kg) (0 m/s) = (15 kg) (v) + (10 kg) (v + 5.25 m/s)
131.2 m/s = 25v + 52.5 m/s
25v = 78.7 m/s
v = 3.15 m/s
Energy is conserved, so the compression of the spring is:
KE = EE + W
½ mv² = ½ kd² + Fd
½ mv² = ½ kd² + mg μ d
½ (10 kg) (3.15 m/s)² = ½ (1000 N/m) d² + (10 kg) (9.8 m/s²) (0.3) d
49.6 = 500 d² + 29.4 d
0 = 500 d² + 29.4 d − 49.6
d = [ -29.4 ± √(29.4² − 4(500)(-49.6)) ] / 1000
d = (-29.4 ± 316.2) / 1000
d = 0.287 m
A 5 kg block is released from rest at the top of a quarter- circle type curved frictionless surface. The radius of the curvature is 3.8 m. When the block reaches the bottom o the curvature it then slides on a rough horizontal surface until it comes to rest. The coefficient of kinetic friction on the horizontal surface is 0.02.
a. What is the kinetic energy of the block at the bottom of the curved surface?
b. What is the speed of the block at the bottom of the curved surface?
c. Find the stopping distance of the block?
d. Find the elapsed time of the block while it is moving on the horizontal part of the track.
e. How much work is done by the friction force on the block on the horizontal part of the track?
Answer:
a. 186.2 J b. 8.63 m/s c. 190 m d. 43.2 s e. 186.2 J
Explanation:
a. From conservation of energy, the potential energy loss of block = kinetic energy gain of the block.
So, U + K = U' + K' where U = initial potential energy of block = mgh, K = initial kinetic energy of block = 0, U' = final potential energy of block at bottom of curve = 0 and K' = final kinetic energy of block at bottom of curve.
So, mgh + 0 = 0 + K'
K' = mgh where m = mass of block = 5 kg, g = acceleration due to gravity = 9.8 m/s², h = initial height above the ground of block = radius of curve = 3.8 m
So, K' = 5 kg × 9.8 m/s² × 3.8 m = 186.2 J
b. Since the kinetic energy of the block K = 1/2mv² where m = mass of block = 5 kg, v = velocity of block at bottom of curve
So, v = √(2K/m)
= √(2 × 186.2 J/5 kg)
= √(372.4 J/5 kg)
= √(74.48 J/kg)
= 8.63 m/s
c. To find the stopping distance, from work-kinetic energy principles,
work done by friction = kinetic energy change of block.
So ΔK = -fd where ΔK = K" - K' where K" = final kinetic energy = 0 J (since the block stops)and K' = initial kinetic energy = 186.2 J, f = frictional force = μmg where μ = coefficient of kinetic friction = 0.02, m = mass of block = 5 kg, g = acceleration due to gravity = 9.8 m/s² and d = stopping distance
ΔK = -fd
K" - K' = - μmgd
d = -(K" - K')/μmg
Substituting the values of the variables, we have
d = -(0 J - 186.2 J)/(0.02 × 5 kg × 9.8 m/s²)
d = -(- 186.2 J)/(0.98 kg m/s²)
d = 190 m
d. Using v² = u² + 2ad where u =initial speed of block = 8.63 m/s, v = final speed of block = 0 m/s (since it stops), a = acceleration of block and d = stopping distance = 190 m
So, a = (v² - u²)/2d
substituting the values of the variables, we have
a = (0² - (8.63 m/s)²)/(2 × 190 m)
a = -74.4769 m²/s²/380 m
a = -0.2 m/s²
Using v = u + at, we find the time t that elapsed while the block is moving on the horizontal track.
t = (v - u)/a
t =(0 m/s - 8.63 m/s)/-0.2 m/s²
t = - 8.63 m/s/-0.2 m/s²
t = 43.2 s
e. The work done by friction W = fd where
= μmgd where f = frictional force = μmg where μ = coefficient of kinetic friction = 0.02, m = mass of block = 5 kg, g = acceleration due to gravity = 9.8 m/s² and d = stopping distance = 190 m
W = 0.02 × 5 kg × 9.8 m/s² × 190 m
W = 186.2 J
The potential energy of the loss of the block will be equal to the kinetic energy gain. The kinetic energy of the block is 186.2 J at the bottom of the curved surface.
The potential energy of the loss of the block will be equal to the kinetic energy gain.
So,
[tex]U = mgh[/tex]
Where,
[tex]U[/tex] - potential energy
[tex]m[/tex] - mass of block = 5 kg
[tex]g[/tex] - gravitational acceleration = 9.8 m/s²
[tex]h[/tex] = height = radius of curve = 3.8 m
Put the values in the formula,
[tex]U = 5 \times 9.8 \times 3.8 \\\\ U = 186.2 \rm \ J[/tex]
Therefore, the kinetic energy of the block is 186.2 J at the bottom of the curved surface.
Learn more about kinetic energy:
https://brainly.com/question/14245799