Lyle filled a glass bottle completely with water. He put the lid on tightly, then put the water in the freezer to cool it down quickly. Lyle forgot about his water until the next day. When Lyle took his bottle out of the freezer, all the water was frozen solid. The bottle had cracked in several places and was broken. If water in the ground acts like water in the bottle when it freezes, how does water in the ground affect layers of rock and soil

The freezing point of pure water is 0°C, the urea solution freezes at –0.186°C.

The temperature at which a liquid solution freezes to a solid is a little lower than the freezing point of the pure solvent. The freezing point depression phenomena has a straightforward relationship to the solute concentration.

The molecular weight of Urea is

14 + 2(1) + 12 + 16 + 14 + 2(1) = 60 g/mole

The number of moles of Urea = 0.6g / 60 = 0.01moles

and the concentration of the solution in moles per kilogram of water is

0.01 moles / 0.100 kg H₂O = 0.1 molal

By taking the freezing point constant for water as 1.86

Δ T f = 1.86°C/m × 0.1 m

Δ T f = 0.186

Because the freezing point of pure water is 0°C, the urea solution freezes at –0.186°C.

To learn more about Freezing point from given link

https://brainly.com/question/28182670

#SPJ4

Based on the assertion and the reason regarding the weight of an object and upthrust experienced by the body in a fluid; Both assertion (A) and reason (R) are true and reason (R) is the correct explanation of assertion (A).

The correct option is A.

The principle of floatation states that an object will float in a fluid if the upthrust that is experienced by the object is equal to or greater than the weight of the object.

The upthrust experienced by a body is the upward force that a liquid or gas exerts on a body floating in it.

Upthrust on a body depends on the acceleration due to gravity, the density of the liquid, and the volume of the body immersed in the liquid.

The weight of a body is the force of gravity acting on the body. The weight of a body acts downward.

Thus in a fluid, the weight of an object acts downward while the upthrust on the object acts in an upward direction.

Learn more about upthrust and weight at: https://brainly.com/question/20432193

#SPJ1

The shape (molecular geometry)  [tex]BrF^{-}_{4}[/tex] is square planar.

Start with the tetrafluoroborate ion's Lewis structure, [tex]BrF^{-}_{4}[/tex]. A total of 36 valence electrons will be present in the molecule: 7 from bromine, 7 from each of the four fluorine atoms, and one additional electron to give the ion its negative charge.

For a total of 8 of the 36 valence electrons, the bromine atom will form single bonds with each of the four fluorine atoms. The number of valence electrons needed will increase to 32 since the fluorine atoms will each have three lone pairs connected. On bromine, the remaining 4 valence electrons will be arranged as lone pairs.

Four single bonds and two lone pairs make up the six areas of electron density that surround the bromine atom, making its steric number equal to six.

The molecular geometry will be square planar, or [tex]AX_{4}E_{2}[/tex], according to VSEPR Theory.

To know more about electrons click on the link below:

https://brainly.com/question/860094

#SPJ4

Beryllium and iodine do not react to form a compound. The chemical formula for beryllium is Be and the chemical formula for iodine is I. Calcium and iodine can react to form calcium iodide, which has the chemical formula CaI2.

In a chemical reaction, atoms can rearrange themselves to form new compounds by bonding together. The number and type of atoms in the reactants (the starting substances) must be balanced with the number and type of atoms in the products (the substances formed in the reaction). This balance is expressed through the use of chemical formulas.

In the case of beryllium and iodine, there is no chemical reaction that occurs between these two elements. Therefore, the chemical formula for this combination would simply be the symbols for beryllium (Be) and iodine (I) side by side, with no subscripts or other notation indicating a chemical bond between them.

On the other hand, calcium and iodine can react to form calcium iodide, which is a compound made up of calcium and iodine atoms bonded together. The chemical formula for calcium iodide is CaI2, which indicates that there is one calcium atom (represented by the symbol Ca) and two iodine atoms (represented by the symbol I) in each molecule of calcium iodide. The subscript "2" after the symbol for iodine indicates that there are two iodine atoms present.

To know more about compound

https://brainly.com/question/13516179

#SPJ4

To get a 20% by weight solution, 0.167 grams of KCl must dissolve in 60 grams of water.

For more information on molarity kindly visit to

https://brainly.com/question/8732513

#SPJ4

The point B is the diagram in which it has the Highest maximum energy level shown Here For the reaction of 2-methylpropene with hydrogen chloride.

The least strong conformation is the eclipsed conformation in which the methyl and the hydrogen atom are gift near every different and enjoy pressure repulsion on every different.

This ends in steric difficulty and makes the molecule unstable.Isobutylene (or 2-methylpropene) is a hydrocarbon with the chemical formula (CH3)2C=CH2. It is a 4-carbon branched alkene (olefin), one of the 4 isomers of butylene.2−methyl propene is greater reactive with HCl than propene as the +I impact of methyl businesses makes double bond greater electron wealthy and for the duration of electrophilic addition, a tertiary carbocation intermediate is received that's greater strong than secondary carbocation intermediate.

Read more about hydrogen;

https://brainly.com/question/25597694

#SPJ4

With the exception of the noble gases helium, neon, argon, and krypton, oxygen is reactive and will produce oxides with all other elements.

When an element interacts with oxygen, a variety of oxidation states and potential chemical compounds can result. Cellular respiration and photosynthesis are just two biological activities that involve oxygen in numerous reactions.

Oxygen can only generate two bonds because it needs two additional electrons to complete its octet, after which it will run out of empty orbitals in which to receive additional electrons and create additional bonds. Oxygen and sodium will combine to generate an ionic compound.

To know more about Oxygen visit:-

https://brainly.com/question/13370320

#SPJ4

The approximate initial boiling point of Magnesium chloride solution is 102.33 [tex]^0 C[/tex].

The boiling point of normal water is 100 [tex]^0 C[/tex]. but due to additon of solvent the boiling point of water increases by Δ[tex]T_b[/tex] and given by:

Δ[tex]T_b[/tex] = [tex]i*k_b*m[/tex]

Where, i is van't Hoff factor

[tex]k_b[/tex]  is ebullioscopic constant

m is the molality of the sample

The reaction which involves the addition of magnesium chloride in water is:

[tex]MgCl_2- > Mg^2^+ + 2Cl^-[/tex]

so van't Hoff factor(i) is defined as number of molecules formed after reaction so magnesium chloride complete dissociate to form 1 magnesium ion and 2 chlorine ion so total 3 ions is formed and hence

   i(van't Hoff factor) = 3

  [tex]k_b[/tex] = 0.52°C/m for water

 m = [tex]\frac{m_s_o_l_u_t_e}{molar mass (mgcl_2)} * \frac{1000}{m_s_o_l_v_e_n_t}[/tex]

molar mass([tex]mgcl_2[/tex]) = 95.211 [tex]\frac{g}{mole}[/tex]

m=  [tex]\frac{285}{95.211} *\frac{1000}{2000}[/tex]

=> 2.9933*0.5

so m= 1.49 M

Δ[tex]T_b[/tex] = [tex]i*k_b*m[/tex]

=> 3 * 0. 52 *1.49 [tex]^0C[/tex]

=> 2.33  [tex]^0C[/tex]

Δ[tex]T_b[/tex] = T - 100 [tex]^0C[/tex]

T = Δ[tex]T_b[/tex] + 100

so T = 102.33  [tex]^0C[/tex]

To know more about van't Hoff factor click on below link:

https://brainly.com/question/8837607#

#SPJ4

The stereoisomers obtained when (S )-3-methyl-1-pentene reacts with are (2S ,3S )-1,2-dichloro-3-methylpentane and (2R ,3S )-1,2-dichloro-3-methylpentane.

In stereochemistry, stereoisomerism is a kind of isomerism in which molecules have the same chemical formula and sequence of connected atoms but differ in the three-dimensional orientations of their atoms in space.

When various groups of molecules connected to a central core have different relative orientations, stereoisomers develop. R-thalidomide and S-thalidomide are stereoisomers. Enantiomers are mirror images of one another that cannot be overlaid. Enantiomers that are mirror reflections of one other are referred to as stereoisomers. Diastereomers are also non-superimposable, despite the fact that they are not mirror images of each other. Stereoisomers and Diastereomers are not mirror images of one other.

To learn more about stereoisomers, here

https://brainly.com/question/16986110

#SPJ4

There are so many types of chemical reaction reaction like combination reaction, double displacement reaction, nucleophilic substitution reaction etc. Therefore,  the major organic product of the reaction shown is 2-Iodo-2,3-dimethylbutane.

One nucleophile substitutes another in a family of organic reactions known as nucleophilic substitution reactions.

SN1 stands for nucleophilic substitution reaction. Leaving group, a nucleophile, electrophile and a solvent are present. The first step is the slowest because a bond is being broken to form carbocation by the attack of hydrogen ion from the HI acid. Then carbocation rearrangement takes place. Attack of iodide ion to form product 2-Iodo-2,3-dimethylbutane.

Therefore,  the major organic product of the reaction shown is 2-Iodo-2,3-dimethylbutane.

Learn more about  nucleophilic substitution reaction, here:

https://brainly.com/question/28097754

#SPJ4

this question is related to set of equations,

The vertex of f(x) = (x-6)(x+2) is as follows:-

For any equation of the type y = ax^2 + bx + c, the vertex is given by (h, k).

Where, h = -b/2a and k = (4ac - b^2)/4a.

Given, the equation is f(x) = (x - 6)(x + 2)

f(x) = x^2 - 6x + 2x - 12

f(x) = x^2 - 4x - 12

Here, a = 1, b = -4 and c = -12

so, h = -(-4)/2(1)

h = 4/2

h = 2

4ac = 4(1)(-12)

4ac = -48

So, k = [-48 - (-4)^2]/4(1)

k = (-48 - 16)/4

k = -64/4

k = -16

Therefore, the vertex is (h, k) = (2, -16).

so, the vertex of f(x)= (x-6)(x+2) is (2, -16).

Learn more about vertex here :-

https://brainly.com/question/12563262

#SPJ4

The final temperature of the mixture of 20c and 40c water would be 30c.

Temperature is a physical property of matter that quantitatively expresses the common notions of hot and cold.
This is due to the law of conservation of energy, which states that the total energy of a closed system remains constant. The total energy of the two waters together is the same, so the final temperature must be the average of the two. The total mass of the two waters is 100g, and the temperature difference between them is 20c.

So, the final temperature of the mixture is 20c + (20c/100g) x 50g = 30c.
This principle is also known as the "law of mixing temperatures" and is used in many scientific and engineering applications. For example, it is used to calculate the temperature of a mixture of two fluids, or to calculate the cooling of a hot object in a room.
This law can be further extended to mixtures of more than two fluids, as long as the total energy of the system is conserved. This means that the total mass, the specific heat capacity of each fluid, and the temperature of each fluid must all be known in order to calculate the final temperature. This can be a useful tool in engineering applications, such as the cooling of a computer chip or the heating of a room.
In summary, the final temperature of a mixture of two fluids, such as the 50g of 20c and 50g of 40c water, is the average of the two temperatures. The final temperature of the mixture is 30c.
To know more about tempreture click-
https://brainly.com/question/27988898
#SPJ4

All of the aforementioned are incorrect if glycolysis produces two moles of for every mole of glucose.

D is the ideal choice.

Firstly, glycolysis yields two ATP, two NADH, and two pyruvate molecules. The aerobic catabolic breakdown of glucose known as glycolysis yields energy in the form of ATP, NADH, and pyruvate, which then enters the citric acid cycle to yield more energy.

76 ATP molecules can therefore be produced from two glucose molecules. Glycolysis. Two moles of ATP are created anaerobically for every mole of glucose.

To know more about glycolysis visit:-

https://brainly.com/question/15159050

#SPJ4

Explanation:

Elements that have five valence electron are the group 15 element's. Those elements includes Nitrogen (N), Phosphorus (P), Arsenic(Ar) and Antimony (Ab).

The number of the Mg atoms  are present in the Mg ( magnesium ) in the 1.00 mole of the  Mg with molar mass of 24.30 amu is the 6.023 × 10²³ atoms.

The molar mass of the Mg = 24.03 amu

The atomic number of the Mg = 12

the number of moles is given below :

number of moles = mass / molar mass

1 mole of the Mg is equals to the  6.023 × 10²³ atoms.

1 mole of Mg = 6.023 × 10²³ Mg of atoms.

Thus, the 1 mole of Mg contains 6.023 × 10²³ Mg of atoms.

To learn more about moles here

https://brainly.com/question/20486415

#SPJ4

The electron will be released from the atom and become ionized if a photon has greater energy than the electron's binding energy.

E1=13.6 eV is the minimal amount of energy needed to break free of the ground state. E 1 = 13.6 e V . Here, E stands for the overall energy needed to ionize an atom of hydrogen.

The formula En=2.181018n2 J/atom denotes the minimal amount of energy required to ionize an electron from a hydrogen atom's nth Bohr orbit in Joules per atom.

To know more about photon visit:-

https://brainly.com/question/20912241

#SPJ4

It is advised not to use pewter for hot beverages like tea, coffee, or even hot toddy because pewter melts at a comparatively low temperature compared to other metals.

For more information on pewter kindly visit to

https://brainly.com/question/29550352

#SPJ4

The temperature of a gas as the volume of the gas increases and the temperature also rises.

A location inside a gas experiences pressure in all directions. The pressure force at a gas' surface acts perpendicular to the surface. If the gas is moving overall, the measured pressure will differ according to the motion's direction.

The force that is dispersed over a unit area per time perpendicular to an object's surface.

Pressure is the term for the physical force that is exerted on an object. The force is applied perpendicularly to the objects' surfaces per unit area. F/A is the basic formula for pressure (Force per unit area). Pressure is measured in Pascals (Pa). There are four distinct types of pressure: gauge, absolute, ambient, and differential.

To learn more about pressure refer to:

https://brainly.com/question/25736513

#SPJ1

By putting acid on the plastic and observe how it reacts, the chemical properties might be discovered.

Acids normally do not cause any reaction with plastics, and due to this reason plastic container are used to store acid.

Chemical properties are those properties that could observed when a substance undergoes chemical change. during chemical properties one substance changes to another substance.

If the atoms of a molecule are rearranged, the substance is said to have undergone a chemical reaction. This would eventually result in the synthesis of a new chemical.

The forensic scientist is now interested in the plastic's chemical composition. reaction of acid and the plastic could be used to do this.

To know about acid click on below link:

https://brainly.com/question/29796621#

#SPJ4

An essential component of chemistry are atoms. Covalent bond are necessary for atoms to reach the noble gas configuration because sharing electrons makes them stable.

A covalent bond is a type of chemical relationship where the atoms share electron pairs in order to create a compound or molecule.

Covalent bonding happens when atoms share electron pairs. Atoms join together through covalent bonds to form a full electron shell, which boosts stability. By sharing their outermost (valence) electrons, atoms can fill out their outer electron shell and become stable. Even though it's a frequent misconception, atoms don't always disperse their electrons equally when they establish covalent connections.

For such more question on Covalent bond:

https://brainly.com/question/11795029

#SPJ4

The given question is incomplete. Hence, can not be answered. Still, adding some relevant information for your reference.

What are allotropes?

Allotrope or allotropism is the property of some chemical elements existing in two or more different forms in the same physical state, known as allotropes of the element. Allotropes are different structural modifications of an element. Atoms of elements are connected to each other in different ways. Examples of carbon allotropes include diamond (carbon atoms bonded together to form a cubic tetrahedral lattice), graphite (carbon atoms bonded together in layers in a hexagonal lattice), graphene (individual layers of graphite), and fullerenes (these where the carbon atoms are bonded in a spherical, tubular, or ellipsoidal fashion).

The term allotrope is used only for elements, not for compounds. A more general term used for any chemical compound is polymorphism, but its use is usually limited to solid materials such as crystals. Allotropes refer only to different forms of an element within the same physical phase (state of matter such as solid, liquid, or gas). Differences in these states of matter are not the only examples of allotropes. Allotropes of chemical elements are often called polymorphs or phases of the element.

The given question is incomplete. Hence, can not be answered. Still, adding some relevant information for your reference.

To know more about Allotropes, visit:

https://brainly.com/question/13058829

#SPJ4

The value of E° for the cell reaction is 1.06 V.

The cell reaction is indeed the overall reaction that occurs in the cell, written with the assumption that right hand electrode is indeed the cathode, i.e. that the spontaneous reaction occurs in the right-hand compartment.

The cell would be represented by rule that metals have been written first, followed by metal ions found in the electrolyte. And they must be kept separate by the a vertical line.

Given,

  CH4 + 2O2 → CO2 + 2H2O

ΔG° rn = ΔG° of products - 2ΔG°  of reactant

            = {ΔG° of CO2 + 2ΔG° of H2O} - {ΔG° of CH4 + 2ΔG° of O2}

          ={[-394.38 + 2(-237.18)] - [-50.85 + 2(0)]}

           = -817.89 KJ/mole

We know that,

                      ΔG° = -nFE° cell

⇒           E° cell = ΔG°/-nF

⇒                       = (-817.89 x 10^3 j/mole) / 8 x 96500

                      E° cell = 1.06 V

To know more about the Cell reaction, here

https://brainly.com/question/995105

#SPJ4

J.J. Berzelius, a Swedish scientist, advocated in 1813 that chemical symbols be based on the Latin names of the elements; by the middle of the 19th century, this idea had gained widespread acceptance.

Symbols for chemical elements are abbreviated notations that are derived from their scientific names, such as S for sulfur and Si for silicon. Sometimes the sign comes from the Latin term; for example, Au stands for aurum, or gold, and Na stands for natrium, or sodium.

Ancient beings first began scratching lines and hashtag patterns onto red rocks in a South African cave over 100,000 years ago. Such craftsmanship has been claimed as the first indication that our species was capable of producing symbols—clear signs that stand for a particular meaning—and as such, proof of a developed mind.

To know more about Symbol invention visit:-

https://brainly.com/question/26060789

#SPJ4

The freezing point of sucrose solution is −0.372∘C

What is freezing point?

When the temperature of a liquid falls below its freezing point, it transforms into a solid. According to the internationally accepted definition, freezing is the solidification phase change of a liquid or the liquid content of a substance caused by cooling.

Most substances have the same melting and freezing points; however, certain substances have different solid-liquid transition temperatures. Agar, for example, exhibits hysteresis in its melting and freezing points. It melts at 85 °C (185 °F) and solidifies at 32 °C to 40 °C (89.6 °F to 104 °F).

Hence,  the freezing point of sucrose solution is −0.372∘C

To know more about freezing point from given link

https://brainly.com/question/28032179

#SPJ4

Analogous structures demonstrate that identical selective pressures might result in similar adaptations, whereas homologous structures indicate evidence for shared ancestry.

A group of chemical compounds with the same functional group is referred to as a homologous series. As a result of sharing an active group, the molecules have comparable chemical characteristics. The homologous series often includes alkanes, cycloalkanes, and alkenes.

adjective. matching, as in relative position or structure; having the same or a comparable relationship. Similar in origin and structure but perhaps not always in function: A horse's foreleg and a bird's wing are analogous.

To know more about homologous structures visit:-

https://brainly.com/question/7904813

#SPJ4

The order of the reaction is a measure of actual moles of reactant taking part in the reaction to form any product. The unit of rate constant are specific for order and type of reaction.

The power dependence of rate on the concentration of all reactants can be used to define the sequence of reaction. For instance, the concentration of one species in a first-order reaction determines the reaction's pace entirely. The number of species whose concentration directly influences the rate of reaction is represented by the order of reactions. It can be found by summing all of the exponents in the rate expression for the concentration terms. The stoichiometric coefficients corresponding to each species in the balanced reaction do not affect the order of the reaction. Chemical reactions are always defined by the concentrations of the reactants, never by the concentrations of the products.

Hence, rate constant unit depend on the order of the reaction.

To know more about Concentration.

https://brainly.com/question/10725862

#SPJ4

Hybridization is the process of redistribution of the energy of orbitals of individual atoms to give orbitals of equivalent energy happens when two atomic orbitals combine to form a hybrid orbital in a molecule.

The term that is used to indicate the intermixing of atomic orbitals with the same energy levels to give the same number of a new type of hybrid orbitals. This kind of intermixing usually results in the formation of hybrid orbitals which have entirely different energies, shapes, etc.

Orbitals present only in central atom would undergo hybridization. The orbitals containing almost the same energy level combine to form hybrid orbitals. The total numbers of atomic orbitals mixed together are always equal to the total number of hybrid orbitals.

The given question is incomplete so I have answered according to my own knowledge.

Learn more about hybridization from the link given below.

https://brainly.com/question/14140731

#SPJ4

The number of ionic bond in copper is zero.

Pure copper or any pure metal for that matter are examples of metallic bonds, which are neither ionic nor covalent. The copper atoms are stacked very tightly in a solid lattice. In fact it has a face centered cubic lattice which is the closed packing of atoms possible. Each atom has twelve nearest neighbors which allows their 4s orbitals (mostly) to have the optimal overlap. All of these orbitals therefore combine in one gigantic band of delocalized orbitals that spans the entire crystal with its myriad atoms. This band is only partly filled and the difference in energy between one state and the next is puny, which explains copper’s outstanding conductive properties.

Therefore, the bonding in copper has a metallic character.

To know more about copper bonding,

https://brainly.com/question/20897148

https://brainly.com/question/17215770

Stoichiometry is omitted reactant. Reactants are the substances that participate in a chemical reaction. The process by which atoms, the fundamental building blocks of matter.

Rearrange themselves to form new combinations is described by a chemical reaction. Reactants - Reactants are the substances that participate in a chemical reaction. Products - Substances formed as a result of the formation of new bonds in a chemical reaction are referred to as products. As an example: H2 and O2 are reactants in this case because they participate in the chemical reaction. Reactants are the starting materials and appear on the left side of the equation. The products of the reaction are written on the right-hand side of the equation.

To learn more about Reactants, click here.

https://brainly.com/question/17096236

#SPJ4

The concentration progressively increased as the water from the solution evaporated. This is because the amount in the flask would stay the same but the amount of water would decrease.

The atomic weight of sodium chloride (NaCl) is 58.44, which equals 58.44 grammes. If you mix 1 litre of finished solution with 58.44g of NaCl.

One gramme of solute is present in a 100 milliliter final volume one percent solution. For instance, a 1% NaCl solution is made by dissolving 1 g of sodium chloride in 100 ml of distilled water.

To know more about NaCl dissolved visit:

https://brainly.com/question/29008630

#SPJ4