Answer:
habitat destruction, overexploitation, climate change, nitrogen pollution, and invasive species.
Explanation:
Main Modern Causes of Extinction:
habitat destruction - the process by which a natural habitat becomes incapable of supporting its native species.
overexploitation - harvesting a renewable resource to the point of diminishing returns.
climate change - includes both global warmings driven by human emissions of greenhouse gases and the resulting large-scale shifts in weather patterns.
nitrogen pollution - a form of water pollution, refers to contamination by excessive inputs of nutrients.
invasive species - an introduced organism that negatively alters its new environment.
explain+how+you+could+estimate+22%+of+78+to+check+if+your+answer+is+reasonable....
You can estimate the value of 22 % of 78 by finding 10 % of 78 and then adding another 10% to reach as close to 22 % as possible.
How to estimate the value ?Start by finding 10% of 78. Divide 78 by 10 to get 7.8. Since you want to estimate 22%, you can take the calculated value of 10% (7.8) and multiply it by 2 to get 15.6.
Next, compare the estimated value of 15.6 with the actual value of 22% of 78. Calculate the actual value by multiplying 78 by 0.22 (since 22% is equivalent to 0.22). The result is 17.16.
Compare the estimated value of 15.6 with the actual value of 17.16.
By comparing the estimated value of 15.6 with the actual value of 17.16, you can assess the reasonability of your estimate.
Find out more on estimation at https://brainly.com/question/1944282
#SPJ4
A lake has been infected by some type of new algae that is unknown. Every single day the amount of surface area that the algae takes up doubles. Day 1 has a certain amount, day 2 it is 2x that amount. It takes 87 days for the entire lake to be overrun by this new algae. How many days does it take to cover half of the lake? Show your work and explain your thinking. In science we need to be able to justify our answers.
hint: It is not the "obvious" answer.
Answer:
It takes 86 days take to cover half of the lake
Explanation:
In the day #1, the amount of the algae is X,
In the day #2 is 2X
In the day #3 is 2*2*X = X*2²
...
In the day #n the amount of the algae is X*2^(n-1)
Assuming X = 1m³. In the day 87, the area infected was:
1m³*2^(87-1)
7.74x10²⁵m³ is the total area of the lake
the half of this amount is 3.87x10²⁵m³
The time transcurred is:
3.87x10²⁵m³ = 1m³*2^(n-1)
Multiplying for 5 in each side:
ln (3.87x10²⁵) = ln (2^(n-1))
58.9175 = n-1 * 0.6931
85 = n-1
86 = n
It takes 86 days take to cover half of the lakeWhat are some ways your local environment would be affected if there was suddenly less water available?
I'll mark brainliest!
plant life dies
Explanation:
if all water disappears then plants would dry up and die, wich would impact the food chain
Define orbit and orbital motion, and explain why orbital motion occurs.
Answer:
Orbital motion occurs whenever an object is moving forward and at the same time is pulled by gravity toward another object. ... The result is a circular or oval path called an orbit, in which one object keeps moving around the other. Because of the relatively great gravity of the sun, Earth orbits the sun
What is the pOH of a solution whose pH is 12.41?
Answer:
1.59
Explanation:
14=pOH+pH
pOH=14-12.41
pOH=1.59
why is solubility of sucrose (sugar), histidine (an amino acid), gelatin (a protein), and vegetable oil (fat) biologically relevant?
The solubility of compounds such as sucrose, histidine, gelatin, and vegetable oil is biologically relevant due to various reasons. Solubility affects nutrient absorption, cellular processes, transport and distribution of molecules, structural and functional roles of biomolecules, and biological interactions.
What is solubilitySolubility facilitates the digestion and absorption of nutrients, enables cellular reactions and enzymatic processes, influences nutrient transport and distribution within organisms, contributes to the structural and functional properties of biomolecules, and impacts molecular interactions within biological systems. Understanding the solubility of these compounds enhances our understanding of biological mechanisms and aids in the development of therapeutic and nutritional approaches.
Read mroe on solubility here:https://brainly.com/question/23946616
#SPJ4
One advantage to using nuclear power is —
it produces no air pollution
it is hard to store and dispose of the waste
the expense of constructing nuclear reactors
the threat of an accident
Answer:
it produces no air pollution
in the self splicing of group 1 introns, the first transesterification reaction is initiated by:
In the self-splicing of group 1 introns, the first transesterification reaction is initiated by the nucleophilic attack of the 3' hydroxyl group of the guanosine nucleotide within the intron on the 5' splice site.
This nucleophilic attack forms a 3' - 5' phosphodiester bond and releases the 5' exon. This process is facilitated by the catalytic properties of the intron RNA itself, without the involvement of any protein factors.
The self-splicing of group 1 introns involves two transesterification reactions that lead to the removal of the intron and the joining of the flanking exons.
The first transesterification reaction is the key step that initiates the splicing process. It is the attack of the guanosine nucleotide on the 5' splice site that triggers the subsequent splicing reactions.
To know more about transesterification, refer here:
https://brainly.com/question/31797652#
#SPJ11
What is the number of moles in 15.0 g AsH3?
O 5.2 mol
O 1200 mol
O 0.44 mol
O 0.19 mol
Answer:
n = 0.19 mol
Explanation:
Given mass = 15 g
The molar mass of AsH₃ = 77.94 g/mol
We need to find the number of moles in 15 g of AsH₃. We know that,
No. of moles = given mass/molar mass
[tex]n=\dfrac{15}{77.94 }\\\\n=0.19\ mol[/tex]
So, there are 0.19 g/mol. Hence, the correct option is equal to 0.19 mol.
An object traveling around another object space is in blank
Answer: An orbit is a regular, repeating path that one object in space takes around another one. An object in an orbit is called a satellite. A satellite can be natural, like Earth or the moon. Many planets have moons that orbit them
HOPE THIS HELPS
Which of the molecules are used as second messengers in signal transduction pathways? insulin adenyl cyclase CAMP calcium ions P3
The molecules used as second messengers in signal transduction pathways are cAMP (cyclic adenosine monophosphate) and calcium ions. Options C and D are correct.
Cyclic adenosine monophosphate (cAMP) and calcium ions are both important second messengers involved in signal transduction pathways. When a signaling molecule, such as a hormone or neurotransmitter, binds to a receptor on the cell surface, it initiates a cascade of intracellular events.
One of these events is the activation of enzymes, such as adenylate cyclase, which synthesizes cAMP from ATP. cAMP then acts as a second messenger by binding to and activating protein kinase A (PKA), leading to the phosphorylation of target proteins and the amplification of the signal. Calcium ions also play a crucial role as second messengers by mediating various cellular processes.
They can be released from intracellular stores or enter the cell through calcium channels, and their binding to specific proteins triggers downstream signaling events. Together, cAMP and calcium ions function as key mediators in signal transduction, transmitting and amplifying signals from the cell surface to the intracellular environment. Options C and D are correct.
To know more about the Transduction pathway, here
https://brainly.com/question/30272141
#SPJ4
if 15.70g of ticl4 reacts in excess oxygen to form 10.40g cl2 what is the percent yield of the reaction
The percent yield of the reaction is approximately 88.71%.
To calculate the percent yield of the reaction, we need to compare the actual yield (the amount of Cl₂ formed) to the theoretical yield (the amount of Cl₂ that would be formed if the reaction proceeded with complete conversion of TiCl₄).
First, we need to determine the molar masses of TiCl₄ and Cl₂. The molar mass of TiCl₄ is calculated as follows:
Ti: 1 atom x 47.87 g/mol = 47.87 g/mol
Cl: 4 atoms x 35.45 g/mol = 141.80 g/mol
Total molar mass of TiCl₄ = 47.87 g/mol + 141.80 g/mol = 189.67 g/mol
Next, we can calculate the number of moles of TiCl₄ and Cl₂ based on the given masses:
Moles of TiCl₄ = 15.70 g / 189.67 g/mol ≈ 0.08274 mol
Moles of Cl₂ = 10.40 g / 70.90 g/mol ≈ 0.14676 mol
From the balanced chemical equation for the reaction:
TiCl₄ + 2O₂ → TiO₂ + 2Cl₂
We can see that the stoichiometric ratio between TiCl₄ and Cl₂ is 1:2. Therefore, according to the balanced equation, the theoretical yield of Cl₂ would be:
Theoretical yield of Cl₂
= 2 (moles of TiCl₄)
= 2 (0.08274 mol)
= 0.16548 mol
Percent yield = (actual yield / theoretical yield) 100
= (0.14676 mol / 0.16548 mol) 100 ≈ 88.71%
Learn more about molar mass here:
https://brainly.com/question/30640134
#SPJ4
Hydrogen peroxide is a powerful oxidizing agent that is used in concentrated solution in rocket fuels and dilute solution as a hair bleach.
A 30% by mass of H2O2 solution has a density of 1.11g/ml. Calculate it's morality, mole fraction of H2O2, and molarity.
The molarity of the 30% by mass hydrogen peroxide solution is 9.78 M, the mole fraction of H2O2 is 1.0, and the molar concentration is also 9.78 M.
To calculate the molarity, mole fraction, and molar concentration (molarity) of a 30% by mass hydrogen peroxide (H2O2) solution with a density of 1.11 g/ml, we need to follow these steps:
Step 1: Calculate the molarity (M):
The molarity is defined as the number of moles of solute per liter of solution. We need the molar mass of hydrogen peroxide to calculate the number of moles.
The molar mass of H2O2 = 2(1.01 g/mol) + 2(16.00 g/mol) = 34.02 g/mol
The mass of H2O2 in 100 g of the solution (30% by mass) = 30 g
Number of moles of H2O2 = mass / molar mass = 30 g / 34.02 g/mol = 0.882 mol
The volume of the solution can be calculated using the density:
Volume of solution = mass of solution / density = 100 g / 1.11 g/ml = 90.09 ml = 0.09009 L
Molarity (M) = moles / volume = 0.882 mol / 0.09009 L = 9.78 M
Step 2: Calculate the mole fraction (χ) of H2O2:
The mole fraction is the ratio of the moles of H2O2 to the total moles of all components in the solution.
Mole fraction (χ) = moles of H2O2 / total moles
Total moles = moles of H2O2 = 0.882 mol
Mole fraction (χ) = 0.882 mol / 0.882 mol = 1.0
Step 3: Calculate the molar concentration (molarity):
Molar concentration (molarity) is the number of moles of solute per liter of solution.
Molarity (M) = moles of H2O2 / volume of solution = 0.882 mol / 0.09009 L = 9.78 M
Learn more about mole fraction here:
https://brainly.com/question/3072493
#SPJ11
3. What is the density of a 100 grams (g) box that displaces 20 mL of water?
Answer: the density is 997 kg
Explanation:
Coke in a Coca Cola bottle has a volume of 500 ml and a mass of 756 grams. What is its density
Answer: 1.11 g/mL is the density
In the cytosol of rat hepatocytes, the temperature is 37°C and the mass-action ratio, Q, is [ATP]/[ADP][Pi] = 5.33 x 10M- Calculate the free energy required to synthesize ATP in a rat hepatocyte (AG'º for ATP hydrolysis is -30.5 kJ/mol.)
The free energy required to synthesize ATP in a rat hepatocyte is 24,365.6364 J/mol
To calculate the free energy required to synthesize ATP in a rat hepatocyte, we can use the formula:
ΔG'º = -RTln(Q)
where:
ΔG'º is the standard free energy change,
R is the gas constant (8.314 J/(mol·K)),
T is the temperature in Kelvin,
ln(Q) is the natural logarithm of the mass-action ratio.
Given:
ΔG'º = -30.5 kJ/mol
T = 37°C = 37 + 273.15 = 310.15 K
Q = 5.33 x [tex]10^{(-10)[/tex] M
First, we need to convert ΔG'º from kJ/mol to J/mol:
ΔG'º = -30.5 kJ/mol = -30.5 x [tex]10^3[/tex] J/mol
Next, we can calculate the free energy required to synthesize ATP using the formula:
ΔG = ΔG'º - RTln(Q)
ΔG = [tex](-30.5 * 10^3 J/mol) - (8.314 J/(molK) * 310.15 K) * ln(5.33 x 10^{(-10))[/tex]
≈ -30,500 J/mol - 2576.1911 J × (-21.3364)
≈ -30,500 J/mol + 54,865.6364 J
≈ 24,365.6364 J/mol
Calculating this expression will give us the value of ΔG, which represents the free energy required to synthesize ATP in a rat hepatocyte.
Learn more about here:
#SPJ11
o facilitate ease of dose calculations for cefazolin injection, your department policy
states that the resulting concentration after reconstitution should be 100 mg/mL. The
packaging insert for cefazolin 1-g vial instructs you to add 3.4 mL of sterile water without
bacteriostat, resulting in a reconstituted solution of 250 mg/mL
i. What is the final volume of the reconstituted cefazolin solution?
A 3 mL
B. 4 mL
C. 5 mL
D. 2.5 mL
ii. What is the volume of the cefazolin powder?
A 0.4 mL
B. mL
C. 0.7 mL
D. 0.6 mL
iii. What is the final volume of the 100mg/mL cefazolin solution?
A. 6 mL
B. 8 mL
C. 7 mL
D. 10 mL
The final volume of the reconstituted cefazolin solution is 4 mL. The volume of the cefazolin powder is 0.6 mL. The final volume of the 100 mg/mL cefazolin solution is 10 mL.
The packaging insert instructs to add 3.4 mL of sterile water without bacteriostat to the 1-g vial of cefazolin. This results in a reconstituted solution with a concentration of 250 mg/mL.
To find the final volume, we can set up the equation:
Concentration of reconstituted solution = Amount of drug / Final volume
Using the given concentration (250 mg/mL) and the amount of drug (1 g = 1000 mg), we can rearrange the equation to find the final volume:
250 mg/mL = 1000 mg / Final volume
Solving for the final volume:
Final volume = 1000 mg / 250 mg/mL = 4 mL
Therefore, the final volume of the reconstituted cefazolin solution is 4 mL.
To find the volume of the cefazolin powder, we need to subtract the volume of sterile water added from the final volume of the reconstituted solution.
Given that 3.4 mL of sterile water is added to the vial, and the final volume of the reconstituted solution is 4 mL, we can calculate the volume of the cefazolin powder as follows:
Volume of cefazolin powder = Final volume - Volume of sterile water added
Volume of cefazolin powder = 4 mL - 3.4 mL = 0.6 mL
Therefore, the volume of the cefazolin powder is 0.6 mL.
To determine the final volume of the 100 mg/mL cefazolin solution, we can use the concentration and the amount of drug.
We are given that the resulting concentration after reconstitution should be 100 mg/mL. Considering the amount of drug is 1 g (1000 mg), we can set up the following equation:
Concentration of reconstituted solution = Amount of drug / Final volume
Using the given concentration (100 mg/mL) and the amount of drug (1000 mg), we can rearrange the equation to find the final volume:
100 mg/mL = 1000 mg / Final volume
Solving for the final volume:
Final volume = 1000 mg / 100 mg/mL
Final volume = 10 mL
Therefore, the final volume of the 100 mg/mL cefazolin solution is 10 mL.
To know more about cefazolin visit:
https://brainly.com/question/8549780
#SPJ11
Why does the offspring have identical inherited traits as the parent?
um can someone help balance this...id.k how
CH4 + 2 O2 = CO2 + 2 H2O
i believe it's this :p
What is the maximum pH an aqueous solution of 0.050 M Cu(NO3)2 can be adjusted to before a precipitate of Cu(OH)2 will form?
a. 4.2
b. 5.0
c. 7.0
d. 8.5
5.0 is the maximum pH an aqueοus sοlutiοn οf 0.050 M Cu(NO₍)₂ can be adjusted tο befοre a precipitate οf Cu(OH)₂ will fοrm
What is pH?pH, οften knοwn as acidity in chemistry, has histοrically stοοd fοr "pοtential οf hydrοgen" (οr "pοwer οf hydrοgen"). It is a scale used tο describe hοw basic οr hοw acidic an aqueοus sοlutiοn is. When cοmpared tο basic οr alkaline sοlutiοns, acidic sοlutiοns—thοse with higher hydrοgen (H+) iοn cοncentratiοns—are measured tο have lοwer pH values.
Using a cοncentratiοn cell with transference, the pοtential difference between a hydrοgen electrοde and a standard electrοde, such as the silver chlοride electrοde, is measured tο get the primary pH standard values. With the use οf a glass electrοde, a pH metre, οr a cοlοr-changing indicatοr, the pH οf aqueοus sοlutiοns can be determined.
Cu(OH)2⇔[tex]Cu^2 +2OH-[/tex]
s[tex]^2=1.0*10^{-19}[/tex]
[tex]s=3.16*10^{=9}[/tex]
[tex]{OH-}=2s=6.3*10^{10^{-19}[/tex]
[tex]{H+}=10^{-14}/OH[/tex]
[tex]{H+}=1.58*10^{-6}[/tex]
[tex]pH=-log(1.58*10^{-6}[/tex]
pH≈5
To learn more about pH :
https://brainly.com/question/172153
#SPJ4
Please help I need answer soon.
A volcanic mountain made up of volcanic ash, cinders, and bombs is called a ___________________.
Answer:
Cinder cone
Explanation:
Which plate does not appear in both hemispheres?
Indo-Australian
African
Pacific
Eurasian
Answer:
Indo-Australian
Explanation:
Indo-Australian does not appear in both hemispheres.
Answer:
I can clarify, its into Australian
When an aqueous solution of silver nitrate is
mixed with an aqueous solution of potassium
chloride which are the spectator ions?
Answer:
[tex]K^{+}[/tex] and [tex]NO_{3}^{-}[/tex]
Explanation:
The equation for the reaction is AgNO3(aq) + KCl(aq) ==> AgCl(s) + KNO3(aq)
With all the ions, it is
[tex]Ag^{+}[/tex](aq) + [tex]NO_{3} ^{-}[/tex](aq) + [tex]K^{+}[/tex](aq) + [tex]Cl^{-}[/tex](aq) ==> AgCl(s) +
[tex]K^{+}[/tex] and [tex]NO_{3} ^{-}[/tex] do not change, so they are the spectator ions and are removed
The ionic equation is:
[tex]Ag^{+}[/tex](aq) + [tex]Cl^{-}[/tex](aq) ==> AgCl(s)
calculate+the+milligrams+of+cl+(35.453+g/mol)+in+a+3.49+g+sample+of+cleaning+solution+containing+21.5+wt%+naocl+(74.44+g/mol).+naocl+is+the+only+source+of+cl+in+this+solution.
There are 356.2 mg of Cl in a 3.49 g sample of cleaning solution containing 21.5 wt% NaOCl (74.44 g/mol).
To calculate the milligrams of Cl (35.453 g/mol) in a 3.49 g sample of cleaning solution containing 21.5 wt% NaOCl (74.44 g/mol), first calculate the weight of NaOCl in the sample:3.49 g x 0.215 = 0.75 g NaOCl
Next, calculate the number of moles of NaOCl in the sample:0.75 g NaOCl ÷ 74.44 g/mol = 0.01006 mol NaOClSince NaOCl is the only source of Cl in the solution, this also represents the number of moles of Cl in the sample.
Finally, convert the number of moles of Cl to milligrams:0.01006 mol x 35.453 g/mol x 1000 mg/g = 356.2 mg Cl.
We have to calculate the milligrams of Cl in a cleaning solution sample.
The sample contains NaOCl, so we will first calculate the number of moles of NaOCl in the sample. This will also give us the number of moles of Cl in the sample because NaOCl is the only source of Cl in the solution.
To know more about moles click on below link:
https://brainly.com/question/30885025#
#SPJ11
What does it mean to say that scientific models are open to change? (2 points)
a
Scientific models are usually not very accurate.
b
Scientific models can be adjusted when new information is found.
c
People can adjust scientific models to fit their personal beliefs.
d
Experimental results can be changed to fit the accepted model
T/F. throughout history, people have used chemicals to change their moods, behavior, and levels of consciousness.
The statement "throughout history, people have used chemicals to change their moods, behavior, and levels of consciousness. " is true.
For example, ancient civilizations used alcohol, opium, and other natural substances for medicinal and religious purposes.
In modern times, psychoactive substances such as caffeine, nicotine, and prescription medications are widely used to alter mood, perception, and behavior.
Some of these chemicals are legal, while others are illegal or controlled substances that can lead to addiction, overdose, and other negative consequences. It is important to understand the risks and benefits of using these substances and to seek help if substance abuse becomes a problem.
To know more about psychoactive substances click on below link:
https://brainly.com/question/29657199#
#SPJ11
in the following voltaic cell, the addition of cucl2(aq) to the cathodic compartment would cause the emf to increase. sn(s) 2 cu2 ⇄ sn2 (aq) 2 cu (aq) choix de groupe de réponses. true or false
The statement on the effect of the addition of CuCl₂(aq) to the cathodic compartment is True.
What effect does the addition of CuCl₂(aq) to the cathodic compartment bring ?According to Le Chatelier's principle, if the concentration of a reactant in a reaction at equilibrium is increased, the reaction will shift in the direction that consumes that reactant.
The reaction at the cathode is :
Cu₂ + ( aq ) + 2e- ⇄ Cu(s)
By adding CuCl₂(aq), we increase the concentration of Cu₂+ ions in the cathodic compartment. This would cause the reaction to shift to the right, which means more Cu(s) would be produced and more electrons would be consumed.
Therefore, increasing the concentration of Cu₂+ ions in the cathodic compartment will increase the cell potential or emf.
Find out more on addition to cathode at https://brainly.com/question/14150731
#SPJ4
Which of the following equilibria could be used to support the claim that the addition of a small amount of NaOH to the buffer will result in only a very small change in pH? (see image)
I think First statement that is Option A, because, it has total equilibrium on both side, which will never result in increase of any pH level higher or lower than the state, hence
Option A.) is correct
Write the balanced net ionic equation for the following reaction between aqueous Pb(NO3)2 and aqueous NaI and correctly label the states. Use the solubility table to determine if a precipitate forms before writing the net ionic equation. Must show the (1) balanced chemical equation with the right states (2) the cancellation of appropriate spectator ions and the final net ionic equation.
Balanced net ionic equation will be: Pb2+(aq) + 2I-(aq) → PbI2(s)
The balanced chemical equation for the given reaction is;Pb(NO3)2(aq) + 2NaI(aq) → PbI2(s) + 2NaNO3(aq)
This equation is balanced because the number of atoms of the elements present on both sides of the equation is equal.
The states of the substances in the above equation are:
aqueous Pb(NO3)2(aq) , aqueous NaI (aq) → soluble, based on the solubility table PbI2 (s) → precipitate, based on the solubility tableaqueous NaNO3 (aq)
Cancel out the spectator ions from the above equation and the net ionic equation will be:
Pb2+(aq) + 2I-(aq) → PbI2(s)
Hence, the balanced net ionic equation for the given reaction between aqueous Pb(NO3)2 and aqueous NaI and correctly label the states are Pb2+(aq) + 2I-(aq) → PbI2(s) and the states are as follows;
Pb2+(aq) → AqueousI-(aq) → AqueousPbI2(s) → Solid
Know more about balanced net ionic equation :
https://brainly.com/question/32138886
#SPJ11
The ionic equation for the reaction is given as follows:Pb2+ (aq) + 2NO3- (aq) + 2Na+ (aq) + 2I- (aq) → PbI2 (s) + 2Na+ (aq) + 2NO3- (aq)The net ionic equation is the same as the ionic equation, with spectator ions removed.Pb2+ (aq) + 2I- (aq) → PbI2 (s)The final balanced net ionic equation is given as follows:Pb2+ (aq) + 2I- (aq) → PbI2 (s).
The balanced net ionic equation for the following reaction between aqueous Pb(NO3)2 and aqueous NaI and correctly label the states are given below:Explanation:Aqueous lead(II) nitrate (Pb(NO3)2) and aqueous sodium iodide (NaI) are mixed to form solid lead(II) iodide (PbI2) and aqueous sodium nitrate (NaNO3).Before writing the net ionic equation, it is important to determine whether a precipitate will form. By referencing the solubility table, it is discovered that lead(II) iodide is insoluble in water, indicating that a precipitate will form when the two solutions are mixed.The balanced molecular equation for the reaction is given as follows:Pb(NO3)2 (aq) + 2NaI (aq) → PbI2 (s) + 2NaNO3 (aq)To write the ionic equation, the insoluble solid lead(II) iodide must be separated into its component ions. PbI2 is a precipitate; it will not dissociate, while NaNO3 will dissociate into its component ions. The ionic equation for the reaction is given as follows:Pb2+ (aq) + 2NO3- (aq) + 2Na+ (aq) + 2I- (aq) → PbI2 (s) + 2Na+ (aq) + 2NO3- (aq)The net ionic equation is the same as the ionic equation, with spectator ions removed.Pb2+ (aq) + 2I- (aq) → PbI2 (s)The final balanced net ionic equation is given as follows:Pb2+ (aq) + 2I- (aq) → PbI2 (s).
Learn more about ionic equation here:
https://brainly.com/question/29299745
#SPJ11
What is the molarity of an aqueous solution that contains 78g of C6H12O6 dissolved in 2500 mL of solution?
Answer:
[tex]\boxed {\boxed {\sf molarity = 0.17 \ M \ C_6H_12O_6}}[/tex]
Explanation:
Molarity is found by dividing the moles of solute by liters of solution.
[tex]molarity = \frac {moles}{liters}[/tex]
We are given grams of a compound and milliliters of solution, so we must make 2 conversions.
1. Gram to Moles
We must use the molar mass. First, use the Periodic Table to find the molar masses of the individual elements.
C: 12.011 g/mol H: 1.008 g/mol O: 15.999 g/molNext, look at the formula and note the subscripts. This tells us the number of atoms in 1 molecule. We multiply the molar mass of each element by its subscript.
6(12.011)+12(1.008)+6(15.999)=180.156 g/mol
Use this number as a ratio.
[tex]\frac {180.156 \ g\ C_6H_12 O_6}{ 1 \ mol \ C_6H_12O_6}[/tex]
Multiply by the given number of grams.
[tex]78 \ g \ C_6H_12O_6 *\frac {180.156 \ g\ C_6H_12 O_6}{ 1 \ mol \ C_6H_12O_6}[/tex]
Flip the fraction and divide.
[tex]78 \ g \ C_6H_12O_6 *\frac { 1 \ mol \ C_6H_12O_6}{180.156 \ g\ C_6H_12 O_6}[/tex]
[tex]\frac { 78 \ mol \ C_6H_12O_6}{180.156 }= 0.432958102977 \ mol \ C_6H_12O_6[/tex]
2. Milliliters to Liters
There are 1000 milliliters in 1 liter.
[tex]\frac {1 \ L }{ 1000 \ mL}[/tex]
Multiply by 2500 mL.
[tex]2500 \ mL* \frac {1 \ L }{ 1000 \ mL}[/tex]
[tex]2500 * \frac {1 \ L }{ 1000 }= 2.5 \ L[/tex]
3. Calculate Molarity
Finally, divide the moles by the liters.
[tex]molarity = \frac {0.432958102977 \ mol \ C_6H_12O_6}{ 2.5 \ L}[/tex]
[tex]molarity = 0.173183241191 \ mol \ C_6H_12O_6/L[/tex]
The original measurement has 2 significant figures, so our answer must have the same. That is the hundredth place and the 3 tells us to leave the 7.
[tex]molarity \approx 0.17 \ mol \ C_6H_12O_6 /L[/tex]
1 mole per liter is also equal to 1 M.
[tex]molarity = 0.17 \ M \ C_6H_12O_6[/tex]