Las disoluciones comerciales de HCl (PF = 36.5 g/mol) típicamente son 39.0% P/P de este ácido en agua. Determine la molalidad de la disolución del HCl si la densidad de la misma es igual a 1.20 g/ml.

Answer:

31 N left and 32 N right because

Explanation:

It’s the only one movement because when you subtract them there’s still 1 left

Answer:

Oiling is done on a regular basis to sewing Machine because in the machine there are lots of machinery parts i.e. wheels and axels, etc. which are in continuous use and they possess so much frictional force between them that wear tear may be observed in those parts.

For Frictionless sewing

Answer:

Mass = 5.33 g

Explanation:

Given data:

Mass of Al = 2.80 g

Mass of Cl₂ = 4.15 g

Theoretical yield of AlCl₃ = ?

Solution:

Chemical equation:

2Al  +  3Cl₂        →       2AlCl₃

Number of moles of Al:

Number of moles = mass/molar mass

Number of moles = 2.80 g/ 27 g/mol

Number of moles = 0.10 mol

Number of moles of Cl₂:

Number of moles = mass/molar mass

Number of moles = 4.15 g/71 g/mol

Number of moles = 0.06 mol

Now we will compare the moles of AlCl₃ with Al and Cl₂.

                    Cl₂           :        AlCl₃

                    3              :          2

                   0.06         :        2/3×0.06 = 0.04

                   Al             :        AlCl₃

                     2            :          2

                   0.10         :        0.10

Number of moles of AlCl₃ produced by chlorine are less so it will be limiting reactant.

Mass of AlCl₃:Theoretical yield

Mass = number of moles ×molar mass

Mass = 0.04 mol × 133.34 g/mol

Mass = 5.33 g

5.33 grams is the theoretical yield of AlCl₃ in this reaction.

Theoretical yield of any reaction tells about the accurate quantity of the product formed by the complete consumption of reactants.

Given chemical reaction is:

2Al + 3Cl₂ → 2AlCl₃

First we convert the mass of reactants into moles by using the formulas:

n = W/M, where

W = given mass

M = molar mass

Given mass of Al = 2.80 g

Moles of Al = 2.80/27 = 0.10 mole

Given mass of Cl₂ = 4.15 g

Moles of Cl₂ = 4.15/71 = 0.06 mole

From this calculation we conclude that Cl₂ is the limiting reagent, so the formation of product depends on Cl₂.

From the stoichiometry of the reaction, it is clear that:

3 moles of Cl₂ = produce 2 moles of AlCl₃

0.06 moles of Cl₂ = produce 2/3×0.06 = 0.04 moles of AlCl₃

Now we calculate the produced mass of AlCl₃ as:

W = 0.04mol × 133.34g/mol = 5.33g

Hence, 5.33g is the produced theoretical yield.

To know more about Theoretical yield, visit the below link:

https://brainly.com/question/21091465

Answer:

5

Explanation:

The correct coefficient of oxygen is 5.

The question is incomplete, the complete question is;

Examine the chemical reaction C3H8 + O2---->  4H2O + 3CO2. What coefficient of O2 should be added so the number of atoms of oxygen is conserved on both sides of the reaction equation?

A: 3

B: 5

C: 7

D: 10​

The principle of balancing chemical reaction equation is that the number of atoms of each element at the right hand side of the reaction equation must be equal to the number of atoms of the same element at the left hand side of the reaction equation.

Given the reaction;  C3H8 + O2---->  4H2O + 3CO2, it will only become balanced when the coefficient of O2 is 5.

Hence, we can write; C3H8 + 5O2---->  4H2O + 3CO2

Learn more: https://brainly.com/question/17096236

Answer:

41.25g

Explanation:

Given parameters:

Half-life of Technetium - 104  = 18minutes

Mass = 165g

Unknown:

Mass of sample remaining after 36minutes = ?

Solution:

The half-life of a radioactive element is the time taken for half of the element to decay;

Now;

                Start           First half life              Second half-life

Time          0                      18min                        36min

 Mass       165g                 82.5g                        41.25g

Vapour pressure is a measure of the tendency of a material to change into the gaseous or vapour state, and it increases with temperature

Answer:

Lonic.an electron will be transferred from potassium to the chlorine atom

[tex]\huge\boxed{Option C}[/tex]

Ionic bond is a type of bond which is formed between metals and non-metals. The group which provide the Metal are IA and IIA i.e. S block elements. The group which mostly provide non-metal is VII A i.e. halogens. The Metals give up their ONLY Valance shell electron which is accepted by the Non-metal. This results in formation of ions, The Metals gets the positive charge thus called cation and The non-metal gets a negative charge thus called anion. These Positive and Negative ion attract each other resulting in the formation of IONIC BOND.

The Ionic bond is formed between The metal and non metal because, the metals have low ionization energy due to which the valence shell is ejected out easily, and The Non-Metals have high electron affinity which means that  they attract an electron with greater force because they need one electron to complete their octet.

Question has given two atoms Potassium and chlorine. Potassium(Group 1) is metal, Chlorine(Group 7) is non metal. As you can se that there is only one electron in the outer shell of Potassium "K" and Chlorine need only one electron to complete its outer shell so Potassium will give its electron to Chlorine. Due to this reason K will become positive and Cl will become negative and they will both attract eachother forming ionic bond.

So the answer is Option C: Electron will be transferred from the potassium to the chlorine atom.

Answer:

Explanation:

Given isotope;

            C - 12

Unknown:

Atomic number = ?

Atomic mass  = ?

Solution:

Isotopes of an element have the same electronic configuration but only differ in their masses. They have the same atomic number but different mass numbers due to the differences in the number of neutrons in their various nuclei.

 For carbon; atomic number  = 6

        Atomic mass of this isotope  = 12

The atomic number is the number of protons

Atomic mass is the number of protons and neutrons

Answer:

Warm and cold ocean currents can affect the climate of an area along the coast if the winds blow in from the ocean. Warm ocean currents heat the air above the water and carry the warm air to the land, increasing the temperature of the coastal region.

Explanation:

Ocean currents are important to coastal regions for a number of reasons.

Distribute heat. Ocean currents distribute heat around the globe, which helps to moderate the climate in coastal regions. For example, the Gulf Stream brings warm water from the Gulf of Mexico to the coasts of Europe, which helps to keep Europe's climate warmer than it would be otherwise.

Transport nutrients. Ocean currents transport nutrients from the ocean's depths to the surface, which supports marine life. For example, the California Current brings nutrients from the deep ocean to the surface, which supports a rich marine ecosystem off the coast of California.

Diversify marine life. Ocean currents help to diversify marine life by transporting different species to different parts of the ocean. For example, the Kuroshio Current brings warm water from the western Pacific Ocean to the eastern Pacific Ocean, which has helped to diversify the marine life in this region.

Find out more on coastal regions here: https://brainly.com/question/26796424

#SPJ6

Answer: 4) Concentrate it

Explanation:

Answer:

U

Explanation:

UUUUUUUUUUUUUU

Answer:

False

Explanation:

Emectromagnetic waves are slowed down by even the most transparent of mediums.

Answer:

it is number 2

Explanation:

hope this helps it is number 11

Answer:

1.2×10²³ atoms.

Explanation:

Data obtained from the question include:

Mole of propanone = 0.20 mole

Number of atoms of propanone =.?

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.022×10²³ atoms.

This implies that 1 mole of propanone also contains 6.022×10²³ atoms.

Thus, we can obtain the number of atoms in 0.20 mole of propanone as illustrated below:

1 mole of propanone contains 6.022×10²³ atoms.

Therefore, 0.20 mole of propanone will contain = 0.2 × 6.022×10²³ = 1.2×10²³ atoms.

Thus, 0.20 mole of propanone contain

1.2×10²³ atoms.

The total number of atoms in 0.20 mole of propanone is 1.2×10²³, i.e. in given mole 1.2×10²³ atoms of propanone is present.

In one mole of any substance 6.022 × 10²³ atoms of that substance will present, and this number is known by the name of Avogadro's number.

We have given moles of propanone = 0.20 mole

No. of atoms present in 0.20 mole of propanone = 0.20  × 6.022×10²³ = 1.2×10²³.

Hence, 1.2×10²³ atoms are present in given moles.

To know more about Avogadro's number, visit the below link:

https://brainly.com/question/10614569

Answer:

Oxidation: A process in which an atom loses an electron and therefore increases its oxidation number. ... So oxidation reactions need not involve oxygen. This redox reaction is actually the sum of two separate half-reactions (a reduction half-reaction and an oxidation half-reaction).

Explanation:

Hope this helped!

Oxygen is not a necessary reactant for oxidation reaction.

In chemistry oxidation is called the chemical phenomenon in which an atom, molecule or ion loses one or more electrons, thus increasing its positive charge.

As oxygen is an element that usually accepts these electrons, this type of reaction was called oxidation reactions.

Therefore, we can conclude that oxygen is not a necessary reactant for oxidation reaction.

Learn more here: https://brainly.com/question/25202098

Answer:

Number of neutrons in the nucleus.

Explanation:

Mass number is protons plus neutrons. Protons do not change from isotope to isotope

Answer:

The tempreature???

Explanation:

Colder tempreatures lead to a slower chemical reaction and warmer tempreatures lead to a faster  chemical reaction.

The mass of calcium sulfite produced : 15 g

A reaction coefficient is a number in the chemical formula of a substance involved in the reaction equation. The reaction coefficient is useful for equalizing reagents and products.

Reaction

CaO + SO₂ → CaSO₃

mol CaO (MW=56 g/mol)

[tex]\tt \dfrac{7}{56}=0.125[/tex]

Because sulfur dioxide is an excess, so mol CaSO₃ based on mol CaO

From the equation, mol ratio of mol CaSO₃ : mol CaO=1 : 1, so mol CaSO₃ :

[tex]\tt \dfrac{1}{1}\times 0.125=0.125[/tex]

mass CaSO₃ (MW=120 g/mol) :

[tex]\tt 0.125\times 120=15~g[/tex]

Answer:

If the options are

A. It can push objects apart

B. It can pull objects together

C. It acts between charged particles

D. It acts between objects that do not touch

I'm pretty sure it would be C.

Sry if wrong but have nice day! <3

Answer:

Once you have identified the limiting reactant, you calculate how much of the other reactant it must have reacted with and subtract from the original amount.

Explanation:

 1.  Write the chemical equation.

   2.Calculate the moles of product from the first reactant.

   3.Calculate the moles of product from the second reactant.

   4.Identify the limiting reactant and the excess reactant.

   5.Calculate the mass of excess reactant used up.

   6.Calculate the mass of unused excess reactant.

   7.Calculate the mass of limiting reactant needed to react with the unused excess reactant.

Answer:

0.375 g/mL

Explanation:

Given data:

Volume occupy by wood = 200 mL

Mass of wood = 75 g

Density of wood = ?

Solution:

Formula:

d = m/v

by putting values,

d = 75 g/ 200 mL

d = 0.375 g/mL

Answer:

soluble starch, maltose and various dextrins.

Explanation:

Answer:

There are 11 protons in an atom T.

Explanation:

In chemistry, the scientific word for proton is also known as atomic number so the proton number will be 11.

Answer:

11

Explanation:

Answer:

aaaaaaaaaaaaaaaaaaaaaaa

Answer: the answer is biotic because dear are a living factor

Explanation:

Answer:

3 sulphur is more electrically –