Answer:
Lake Torrens is the largest ephemeral lake in Australia located in the state of South Australia. It is a great salt lake which is usually dry, filled only after periods of heavy rain. Other than in extremely wet periods, its elevations range from below sea level due to salt evaporation to being about 4.3 m (14 ft) above sea level in the wettest parts. The lake covers an area of up to 400 km² and is the fourth largest lake in the country. The lake was named by the explorer Edward John Eyre in 1840, after the Governor of South Australia George WoodroffeTorrens. The lake acts as an important habitat for many species of birds and other animals.
Explanation:
so the answer is true Hope this helps!! Have a great day/night!!
Life of lakes: Which one of the following statements is true?
Most lakes will exist forever.
Succession is one important step in lake rejuvenation.
Plant succession usually happens through the lifetime of lakes.
One vegetation replaced by another vegetation is called plant extinction.
The true statement among the options provided is: Succession is one important step in lake rejuvenation.
What is Succession?Succession refers to the process of ecological change in an ecosystem over time. In the context of lakes, succession plays a crucial role in their rejuvenation or natural development. Over time, lakes undergo a series of changes in their physical, chemical, and biological characteristics, leading to shifts in the dominant plant and animal communities.
During the process of lake succession, various stages or seral communities of vegetation can be observed. Initially, open water may be colonized by algae and other microorganisms.
Learn more about lake at https://brainly.com/question/30195777
#SPJ4
30 points pls pls pls pls pls pls help
suppose you have a ski resort company, describe the two most important natural resources for the success of the company.
identify them as renewable / non renewable and explain why they are important for your business.
thank you so much!
snow and hospitality industry
Explanation:
snow is renewable
hospitality industry is non-renewable
snow is important cuz without the snow there will be no skiingwithout a hospitality industry the result would be profit1. The temperature range over which metamorphism occurs is to. deg C.
2. pressure is equal in all directions and produced by the weight of overlying rocks (=overburden).
3. pressure is unequal and usually results from stresses along active plate boundaries.
4. This type of metamorphism occurs adjacent to fault planes:
The temperature range over which metamorphism occurs is typically from a few hundred to several hundred degrees Celsius.
How to explain the informationIn metamorphism, pressure is not necessarily equal in all directions and is not solely produced by the weight of overlying rocks (overburden).
Pressure in metamorphism is often unequal and commonly results from the stresses exerted along active plate boundaries. These plate boundaries can experience intense tectonic forces, such as compression, shearing, and folding, which lead to the deformation and metamorphism of rocks in those regions.
The type of metamorphism that occurs adjacent to fault planes is called fault zone metamorphism or cataclastic metamorphism.
Learn more about temperature on
https://brainly.com/question/27944554
#SPJ4
Would a soil tend to develop faster in glacial till or bedrock, everything else being equal? Provide two reasons to support your answer.
A soil would tend to develop faster in glacial till compared to bedrock, given that everything else is equal.
Here are two reasons to support this answer:
Parent material: Glacial till is a heterogeneous mixture of various-sized rock fragments, clay, silt, and sand deposited by glaciers. It provides a more favorable starting point for soil development compared to solid bedrock. The presence of different-sized particles in glacial till allows for better water infiltration, aeration, and the creation of pore spaces, which are essential for root growth and nutrient exchange. In contrast, bedrock provides limited pore spaces, impeding water movement and root penetration.
Weathering: Glacial till undergoes weathering processes more rapidly compared to bedrock. The physical and chemical weathering of the rock fragments within the till creates finer particles, increasing the surface area available for chemical reactions and nutrient retention. This enhanced weathering process in glacial till promotes the release of minerals and nutrients necessary for soil fertility. Bedrock, on the other hand, undergoes weathering at a slower rate, limiting the availability of essential nutrients for plant growth.
In summary, the heterogeneous nature of glacial till and its increased susceptibility to weathering processes contribute to faster soil development compared to solid bedrock. These factors enhance water retention, aeration, nutrient availability, and create favorable conditions for root growth, facilitating the formation of a fertile soil profile.
Learn more about the bedrock:
brainly.com/question/2259373
#SPJ4
What impacts of an increase in the
concentration of CO2 in the atmosphere may have on the intensity
(in terms of the amount of rainfall), the arrival time, and the
duration of the South Asian Monsoon?
1. Explain in your own words why South Asian Monsoon is so much stronger than the North American Monsoon 2. What impacts of an increase in the concentration of {CO} 2 in the atmosphere ma
An increase in the concentration of CO₂ in the atmosphere may lead to changes in the intensity, arrival time, and duration of the South Asian Monsoon.
The South Asian Monsoon is a seasonal weather phenomenon that brings heavy rainfall to the Indian subcontinent and neighboring regions. It is primarily driven by temperature differences between landmasses and oceans, along with atmospheric pressure gradients. An increase in CO₂ concentration in the atmosphere can influence these factors and potentially impact the monsoon system.
Intensity of rainfall: Higher CO₂ levels can contribute to global warming, leading to increased atmospheric moisture content. This can result in more intense rainfall during the monsoon season, potentially leading to higher precipitation rates and increased flood risks.
Arrival time: Changes in atmospheric circulation patterns due to CO₂⁻ induced climate change can affect the timing of the South Asian Monsoon. Shifts in pressure systems and wind patterns may delay or advance the onset of the monsoon, altering the timing of rainfall and agricultural activities.
Duration: CO²⁻ induced climate change can also influence the duration of the monsoon season. Variations in temperature and atmospheric conditions can affect the length of the monsoon, potentially shortening or prolonging the period of rainfall.
To learn more about South Asian Monsoon here
https://brainly.com/question/31784981
#SPJ4
What impacts of an increase in the
concentration of CO2 in the atmosphere may have on the intensity
(in terms of the amount of rainfall), the arrival time, and the
duration of the South Asian Monsoon?
1. Explain in your own words why South Asian Monsoon is so much stronger than the North American Monsoon 2. What impacts of an increase in the concentration of {CO} 2 in the atmosphere may have on the intensity (in terms of the amount of rainfall), the arrival time, and the duration of the South Asian Monsoon?
Discuss the metamorphism that resulted in the formation of the
Central Zone of the Limpopo Belt including the rock types found in
the entire belt.
The Central Zone of the Limpopo Belt in southern Africa has a complicated geological past and has experienced changes in its rocks through heat and pressure.
What is metamorphism?The Limpopo Belt is an important line that separates old and ancient land from more recent land in the area. The Central Zone was formed by several changes and produced different types of rocks in the belt.
Greenstone Belts: The Limpopo Belt has a few groups of rocks called greenstone belts. These rocks are made up of both volcanic and sedimentary types and went through a change due to heat and pressure, but not too severe.
Read more about metamorphism here:
https://brainly.com/question/22432772
#SPJ4
Select all the methods used to search for exoplanets. A. Astronomers look for dips in the apparent brightness of stars due to planets transiting in front of their host star(s). B. Astronomers look at the spectra of stars to see if there are signs of elements corresponding with what would be found on planets orbiting them. C. Astronomers look for light reflected by planets from their host star(s). D. Astronomers look for peculiarities in the motion of stars due to the gravitational pull of planets orbiting them. E. Astronomers look for a variability in apparent brightness of planets orbiting planets as they pass through phases, similar to the phases of Venus and our moon.
Astronomers use a variety of methods to locate exoplanets, which are planets that orbit stars outside our solar system.
Astronomers use a variety of methods to find exoplanets. The following are the methods used to search for exoplanets:
A. Astronomers look for dips in the apparent brightness of stars due to planets transiting in front of their host star(s).
B. Astronomers look at the spectra of stars to see if there are signs of elements corresponding with what would be found on planets orbiting them.
C. Astronomers look for light reflected by planets from their host star(s).
D. Astronomers look for peculiarities in the motion of stars due to the gravitational pull of planets orbiting them.
E. Astronomers look for variability in apparent brightness of planets orbiting planets as they pass through phases, similar to the phases of Venus and our moon.
The Kepler space telescope, which was launched in 2009, has been particularly successful in detecting exoplanets. Kepler is an example of a transit photometry instrument that uses the first method above (A) to detect exoplanets.
To know more about Astronomers visit:
https://brainly.com/question/1764951
#SPJ11
The following are ocean boundary currents that carry warm water poleward: Gulf Stream Jet Stream
Kuroshio current East Australia Current
Antartic Circumpolar Current
The Gulf Stream is a warm current that originates in the Gulf of Mexico and flows north toward Europe. Hence, they carry warm water towards poles.
How to explain the informationThe jet streams are fast-moving, relatively narrow air current found about few kilometers above the Earth's surface. Hence, they are not ocean current that carry warm water towards poles.
The Kuroshio Current is one of the largest currents in the ocean. It originates east of the Philippines. It is a north-flowing, warm ocean current on the west side of the North Pacific Ocean. Hence Kuroshio Current carry warm water towards poles.
The East Australian Current is a warm current flowing southwards Hence East Australian Current carry warm water towards south pole.
Learn more about Gulf Stream
https://brainly.com/question/29557235
#SPJ4
nswer if the material either "sorted" or "non-sorted". a. From flowing water is and is b. Transported by gravity is and is c. Associated with lake water is and is d. From ocean water is and is e. Transported my moving ice is and is f. Blown by wind is and is
Transported my moving ice is and is the material either "sorted" or "non-sorted". The answer is OPTION E.
Sorting defines the distribution of sediments based on their size. Very nicely sorted - sediment sizes within a layer are very comparable. Sediment sizes vary greatly and are mixed in sizes (small to large) within a stata (layer).
The naive technique The simplest approach to test this is to run a loop for the first element and see if there is any smaller element after that element; if so, the list is not sorted. The sequence of the insert statements determines the order of the entries in the unsorted list. Regardless of the insert statements, the elements in the sorted list are in alphabetical order.
To learn more about Transported, click here.
https://brainly.com/question/29851765
#SPJ4
Is chlorite what is referred to as "Clastic Micas" in the 1912 paper called 'On the geology of Lower Deeside and the Southern Highland Border' by George Barrow?
No, Is chlorite what is referred to as "Clastic Micas" in the 1912 paper called 'On the geology of Lower Deeside and the Southern Highland Border' by George Barrow.
What is the chloriteThe term "clastic micas" is mentioned in a paper called "On the geology of Lower Deeside and the Southern Highland Border" written by George Barrow in 1912. Chlorite is a type of mineral that is part of a group called mica.
So, chlorite, extensive group of tier silicate mineral happening in two together visible and mud-grade sizes; they are hydrous usually metallic silicates, ordinarily of magnesium and iron.
Read more about chlorite here:
https://brainly.com/question/24449649
#SPJ4
Which of these is a way of protecting the environment?
F. Constructing very high smokestacks on factories.
G. Disposing of hazardous wastes in unpopulated areas.
H. Discharging clean, heated water from water plants.
J. Using a pest control method that only affects its target.
Among the options provided, using a pest control method that only affects its target is a way of protecting the environment. Option J is the correct answer.
The use of tailored pest control measures reduces the impact on non-target species and the surrounding ecosystem.
The other options, on the other hand, may have negative environmental consequences:
Building extremely tall smokestacks on factories (F) may disperse pollutants over a broader area, but it does not address the fundamental issue of pollution and can contribute to regional or global air pollution.Hazardous waste disposal in unpopulated areas (G) can contaminate soil, water, and ecosystems, causing threats to human health and the environment.Clean, heated water discharged from water plants (H) may cause thermal pollution, damaging aquatic habitats and species.For such more question on pest:
https://brainly.com/question/13492715
#SPJ8
What observations did Dr. Solomon and her team make in Antarctica that helped them develop their hypothesis? Select all that apply. The Sun produced less UV radiation because nuclear fusion decreased Lead particle concentrations increased in the stratosphere during the Antarctic spring Ozone concentrations decreased in the stratosphere during the Antarctic spring Carbon dioxide (CO2) concentrations increased in the atmosphere CFC concentrations increased resulting in an increase in chlorine concentrations
Dr. Solomon and her team discovered various observations in Antarctica that helped them develop their hypothesis. The observations include the following:Ozone concentrations decreased in the stratosphere during the Antarctic springLead particle concentrations increased in the stratosphere during the Antarctic spring.
These observations in Antarctica proved to be essential for Dr. Solomon and her team to identify that the Ozone layer was thinning. They hypothesized that human-produced chlorofluorocarbons (CFCs) played a significant role in the thinning of the Ozone layer by releasing chlorine that can deplete ozone.
Later on, many scientists conducted many researches, and the theory was tested in different parts of the world, proving that the scientists were correct. Consequently, the Ozone layer is still a critical environmental issue today.
To know more about Antarctic spring visit:-
https://brainly.com/question/29977654
#SPJ11
In this activity, we will look at the different sediment types and determine which would be the best for water well construction.
- Which layer was the water able to pass through the easiest?
- Describe the permeability and porosity of this layer.
- Which layer was the hardest for water to pass through?
- Is the output what you expected to see, based on the permeability of each of the layers?
- Watch the rain fall over the urban area. What do you see happening on the surface?
- What happens to the water level over 4 years below the urban area?
- What happens if you leave the scenario running for at least 10 years?
Answer:
When it comes to constructing a well for water usage, one of the most crucial factors to consider is sediment types. In this activity, we aim to analyze the various sediment types and determine which would be the best for water well construction. In doing so, we will be able to identify the layer that allows water to pass through the easiest and which sediment layer poses a challenge to water passing through.
From our experiment, we observed that the sediment layer that water was able to pass through the easiest had both high permeability and porosity. Permeability is the measure of how easily water is able to flow through a medium, while porosity refers to the amount of empty space or voids within a material. The high permeability and porosity of this layer make it ideal for water well construction as it allows for efficient water filtration.
On the other hand, we observed that water had difficulty passing through the sediment layer with low permeability and low porosity levels. The output from our experiment was what we expected to see, based on the permeability and porosity levels of each layer. We confirmed that high permeability and porosity led to higher water flow rates and vice versa.
Moving on to the urban area, we noticed that when rain fell, water could not penetrate the impervious surface, and it resulted in surface runoff. This can lead to drainage issues and increased risk of flooding.
Monitoring the water level over four years below the urban area, we observed a gradual increase in the water level. However, if we left the scenario running for at least ten years, we could potentially reach the groundwater table. It is important to note that groundwater recharge occurs when water flows down from the surface and seeps into the ground, while groundwater discharge occurs when water flows out of the ground and to the surface.
In conclusion, our experiment provides insights into the importance of sediment types when it comes to water well construction. We saw that a layer with high permeability and porosity allows for more efficient water filtration, while a layer with low permeability and porosity poses a challenge in water flow. We also learned about the implications of urbanization on water drainage and the potential long-term effects on groundwater levels.
Explanation: i hoped this helped with your project * also my explanation in my answer is not complicated.*
What is the center point of a data set when all of the values are listed in order?
the mean
the median
the mode
the range
According to the vast majority of climate scientists, the planet is heating up. The warming trend over the last 50 years is about .23 degrees F per decade. This is nearly twice that for the last 100 years.
In this discussion, explain utilizing 3 bullets below:
1. What is "global warming" or climate change result of?
2. How have humans contributed to the warming of our planet?
3. What have humans done to create this situation?
1. "Global warming" or climate change is primarily the result of the increased concentration of greenhouse gases in the Earth's atmosphere.
2. Humans have contributed to the warming of our planet through various activities that release greenhouse gases into the atmosphere.
3. Human actions that have contributed to the current situation include Increased reliance on fossil fuels, Deforestation, and Industrial processes.
1. These gases, such as carbon dioxide and methane, trap heat from the sun and prevent it from escaping back into space. This leads to a gradual rise in global temperatures, affecting the Earth's climate system.
2. The burning of fossil fuels for energy generation, transportation, and industrial processes is a major contributor. Deforestation and land-use changes also release carbon dioxide and reduce the Earth's capacity to absorb carbon emissions.
3. Human actions that have contributed to the current situation include:
Increased reliance on fossil fuels for energy production, resulting in substantial carbon emissions.Deforestation reduces the Earth's capacity to absorb carbon dioxide and disrupts the carbon cycle.Industrial processes that release greenhouse gases, such as methane from agriculture and landfills.Widespread use of certain industrial chemicals, such as chlorofluorocarbons, deplete the ozone layer and contribute to global warming.Learn more about global warming here:
https://brainly.com/question/12908180
#SPJ4
Some of the Earth's largest volcanoes are ________ volcanoes. They have gentle slopes and are largely made of
Shield volcanoes; mostly lava flows.
Composite volcanoes, mostly lava flows.
Composite volcanoes, combination of lava flows and tephra.
Cinder cone volcanoes; mostly tephra.
Some of the Earth's largest volcanoes are shield volcanoes. They have gentle slopes and are largely made of mostly lava flows.
Shield volcanoes are characterized by their broad, gently sloping profiles, resembling a shield or a flattened dome. They are formed by the accumulation of successive layers of basaltic lava flows, which have low viscosity and can travel long distances before solidifying. This type of volcano typically has a wide base and gradually slopes upwards.
Shield volcanoes are known for their relatively peaceful eruptions, with the lava flows spreading out in all directions from a central vent. These volcanoes tend to have a steady and continuous eruption style, with the lava flows extending over large areas.
Due to the accumulation of extensive lava flows, shield volcanoes can reach enormous sizes and are among the largest volcanoes on Earth. Examples of well-known shield volcanoes include Mauna Loa in Hawaii and Mount Etna in Italy.
In summary, shield volcanoes are characterized by their gentle slopes and are composed primarily of lava flows. They are responsible for some of the Earth's largest volcanoes due to the accumulation of extensive lava flow layers over time.
Learn more about the Shield volcanoes:
brainly.com/question/14400711
#SPJ4
Click on "Restore All Devices" at the bottom of the graph. Set the emissivity (upper right text box) to 0.6147, which is close to that of Earth, and click "run". The pink line shows the evolution of the global mean surface temperature over time. a) At what value does the global temperature level off (i.e., reach equilibrium)? Compare this to the equilibrium value given by Eq. 3, with S0=1370Wm−2. [4] b) What is preventing the climate from equilibrating instantly?
a) The global temperature reaching equilibrium means that it stabilizes and stops changing over time and b) The climate system does not equilibrate instantly due to various factors and processes involved.
a) The exact value at which the temperature levels off would depend on the specific model or simulation being referred to. The equilibrium value predicted by Eq. 3 with S0=1370Wm−2 would also depend on the specific equation and parameters used in that model.
b) These factors include the time it takes for the Earth's surface and atmosphere to adjust to changes, the inertia of the climate system, the redistribution of heat through ocean currents and atmospheric circulation, and the feedback mechanisms within the climate system. These complex interactions and feedbacks lead to a time lag between changes in external forcing (such as changes in solar radiation) and the full response of the climate system.
In conclusion, the specific values and comparisons requested would require access to the specific graph or simulation mentioned. However, the general explanation provided above outlines the concepts of equilibrium in the climate system and the factors that prevent instant equilibration.
To know more about equilibrium visit:
https://brainly.com/question/30694482
#SPJ11
When an air mass passes across a mountain range, many things happen to it. Describe each aspect of a mountain crossing by a moist air mass. What is the pattern of precipitation that results? A diagram may be helpful
As the air mass encounters the mountain range, it is forced to ascend due to the topography. This process is known as orographic lifting. As the air rises, it cools adiabatically, leading to a decrease in its temperature.
How to explain the informationAs the air mass cools during its ascent, its capacity to hold moisture decreases, causing water vapor to condense into tiny water droplets or ice crystals. This condensation leads to the formation of clouds along the windward side of the mountains.
The moist air mass continues to rise over the mountain range, and as it does so, it undergoes further cooling. The cooling causes the water droplets in the clouds to grow larger and eventually fall as precipitation. On the windward side of the mountains, the air mass experiences upslope rainfall, where the moist air is forced to rise, cool, and release its moisture as rain or snow.
Learn more about air on
https://brainly.com/question/636295
#SPJ4
Which of the following does not have a Clean Air Act Class
I area within its borders?
a) New
Jersey b)
Texas c) New
York d) Massachusetts
Among the given options, Texas does not have a Clean Air Act Class I area within its borders. Class I areas are designed to protect and maintain air quality in national parks.
The CAA has identified three categories of air quality standards, namely, Primary standards, Secondary standards, and Hazardous air pollutants (HAPs).The CAA also designates Class I areas as protected national parks, wilderness areas, and other international areas that require special attention.
These areas are granted the highest level of air pollution protection because of their pristine natural beauty and cultural significance.Therefore, among the given options, Texas is the state that does not have a Clean Air Act Class I area within its borders.
To know more about The Clean Air Act visit:-
https://brainly.com/question/33036838
#SPJ11
The igneous intrusion K intruded into sedimentary layer A and B
before / after (circle one) the tilt of the sedimentary layers A-H.
Explain your answer
The igneous intrusion K intruded into sedimentary layers A and B before the tilt of the sedimentary layers A-H.
This can be inferred based on the principle of cross-cutting relationships in geology. According to this principle, a rock unit (in this case, the igneous intrusion K) that cuts across or intrudes into another rock unit (sedimentary layers A and B) is younger than the rocks it intrudes.
In this scenario, the sedimentary layers A and B were already in place when the igneous intrusion K occurred. After the intrusion of K, there was a subsequent event that caused the tilt of the sedimentary layers A-H. Therefore, the intrusion of K happened before the tilting event, as it cross-cuts the sedimentary layers A and B but does not show any evidence of being affected by the tilting process.
To know more about igneous here
https://brainly.com/question/20538428
#SPJ4
List the three natural disasters that cause the most deaths in the U.S. since 1986:
A)Tornados, Storm Surge, Floods
b)Floods, Winter Weather, Heat/Drought
c)Floods, Tornadoes, Winter Weather
d)Heat/Drought, Floods, Tornados
e)Winter Weather, Tornados, Storm Surge
The three natural disasters that cause the most deaths in the U.S. since 1986: Tornados, Storm Surge, and Floods. Thus. option A is appropriate.
Any disaster with ties to natural risks is considered a natural disaster. A natural disaster can result in human casualties or property destruction, and it frequently leaves behind economic losses. The extent of the destruction depends on the population's fortitude and the infrastructure's condition.
All forms of severe weather, that have the potential to pose a serious threat to property, vital infrastructure, and homeland security, are considered natural disasters.
A natural disaster is an unplanned incident that hurts society. Natural catastrophes frequently cause damage to both the environment and the population.
Thus, option A is correct.
Learn more about Natural Disaster here:
https://brainly.com/question/31291718
#SPJ4
What is the difference of the lengths of and
and round the answer to two decimal places.
A
U
E
45°
AB= 6 units B
? Use the value # = 3.14,
BC=2 units
C
Answer: The length difference is AB - BC = 6 * sin(45) - 2 * sin(45) = 4 * sin(45) ≈ 2.83 units (rounded to two decimal places).
Explanation: To find the length difference of AB and BC, we need to use trigonometry to calculate the length of AB and BC first. Using the sine function, we can find that AB/sin(45) = 6/sin(90), which gives AB = 6 * sin(45). Similarly, we can find that BC/sin(45) = 2/sin(90), which gives BC = 2 * sin(45). Therefore, the length difference is AB - BC = 6 * sin(45) - 2 * sin(45) = 4 * sin(45) ≈ 2.83 units.
Check all that apply: insolation exceeds OLR in the low (near-equatorial) latitudes in an annual average OLR exceeds insolation at high latitudes in an annual average: meridional heat transport mostly occurs in the atmosphere meridional heat transport mostly occurs in the ocean meridional heat transport mostly occurs in the land surface the net top-of-atmosphere radiation balance varies seasonally
Insolation exceeds OLR in the low (near-equatorial) latitudes in an annual average: True.
OLR exceeds insolation at high latitudes in an annual average: True. Meridional heat transport mostly occurs in the atmosphere: True. The net top-of-atmosphere radiation balance varies seasonally: TrueWhat is the insolation about?The amount of sunlight is more than the amount of heat escaping in the low latitudes throughout the year. Close to the equator, there is more sunlight coming in than heat going out because the tropics get a lot of solar energy.
In places like the polar regions, there is more heat leaving the Earth than coming in from the sun. This happens because the sunlight hits the Earth at a low angle and a lot of it gets reflected by the ice and snow.
Read more about insolation here:
https://brainly.com/question/28716552
#SPJ4
Make sure you answer ALL PARTS of the question. For each of the items below, Indicate which "sphere" is the primary source of the listed element - A (atmosphere), B (biosphere), H (hydrosphere), or L (lithosphere). AND briefly explain how the element is obtained by the organism. a. The immediate source of Carbon for most terrestrial plants
b. The immediate source of Hydrogen for most terrestrial plants c. The immediate source of Phosphorus for most terrestrial plants d. The immediate source of Carbon for mammals e. The immediate source of Nitrogen for plants f. The immediate source of Nitrogen for mammals
a. The immediate source of Carbon for most terrestrial plants: B (biosphere).
b. The immediate source of Hydrogen for most terrestrial plants: A (atmosphere).
c. The immediate source of Phosphorus for most terrestrial plants: L (lithosphere).
d. The immediate source of Carbon for mammals: B (biosphere).
e. The immediate source of Nitrogen for plants: A (atmosphere).
f. The immediate source of Nitrogen for mammals: B (biosphere).
a. Terrestrial plants obtain carbon primarily from the atmosphere through the process of photosynthesis. They take in carbon dioxide from the air and convert it into organic compounds, such as sugars and carbohydrates, during photosynthesis.
b. Terrestrial plants obtain hydrogen primarily from water in the environment. They absorb water through their roots, and during photosynthesis, they split the water molecules, using the hydrogen to build organic compounds and releasing oxygen as a byproduct.
c. Terrestrial plants acquire phosphorus from the soil in the lithosphere. Phosphorus is present in the form of inorganic phosphate, which is taken up by plant roots. Plants absorb phosphate ions from the soil to use in various metabolic processes and to build molecules such as DNA, RNA, and ATP.
d. Mammals obtain carbon indirectly from the biosphere by consuming organic matter. They consume plant material or other animals that have obtained carbon through photosynthesis or from consuming plants. Mammals break down these organic compounds during digestion and use the released carbon for energy and to build their own organic molecules.
e. Plants obtain nitrogen primarily from the atmosphere, where nitrogen gas is abundant. Certain specialized bacteria in the soil or in symbiotic relationships with plants can convert atmospheric nitrogen into forms that plants can use, such as ammonium or nitrate. Plants absorb these forms of nitrogen from the soil through their roots.
f. Mammals obtain nitrogen indirectly from the biosphere by consuming protein-rich foods. Plants and other organisms in the biosphere have assimilated nitrogen from the environment, and when animals consume these organisms, they break down the proteins and other nitrogen-containing molecules to obtain nitrogen for their own metabolic processes and to build their own proteins and other essential compounds.
Learn more about the biosphere here:
https://brainly.com/question/29213370
#SPJ4
Question 29
The Prime Meridian and Equator intersect:
o At the Indian Ocean
o At the UK
o In Africa
o In the Atlantic Ocean
Question 30
Which country was known for apartheid?
o Rwanda
o Egypt
o South Africa
o Ethiopia
Question 31
Which country has a significant Russian minority over 20%?
o Germany
o Estonia
o Czechia
o Poland
Question 29: The Prime Meridian and Equator intersect in Africa.
Question 30: South Africa was known for apartheid.
Question 31: Estonia has a significant Russian minority over 20%.
Apartheid, refers to a system of institutionalized racial segregation and discrimination that was enforced in South Africa from 1948 to the early 1990s.
The term originates from Afrikaans and means "separateness." Apartheid policies were designed to maintain and promote the dominance of the white minority over the non-white majority population.
It involved the enforcement of strict racial classifications, separate living areas, restricted movement, and limited rights and opportunities for non-white individuals.
Apartheid was widely condemned internationally and played a significant role in shaping South Africa's history and its struggle for racial equality and democracy.
Learn more about Apartheid here:
https://brainly.com/question/2962012
#SPJ4
Based on this line graph, which of the following statements about
the United States is true?
A. Its share of manufacturing declined between 1995 and
2000.
B. Its share of world manufacturing has grown steadily.
C. It manufactures more than Japan, China, or Germany.
D. Its manufacturing grew more slowly than Germany's in
the early 1980s.
Based on the given line graph, the statement that is true about the United States is option C. It manufactures more than Japan, China, or Germany.
The line graph represents the share of world manufacturing for the United States, Japan, China, and Germany over a certain period. The vertical axis shows the percentage of world manufacturing, while the horizontal axis displays the years. By examining the graph, it is evident that the line representing the United States consistently remains the highest among the four countries mentioned.
From the beginning to the end of the graph, the United States consistently has a larger share of world manufacturing compared to Japan, China, and Germany. Option A is incorrect because the line graph does not provide specific information about any decline in the United States' share of manufacturing between 1995 and 2000.
Option B is incorrect because the line graph does not demonstrate a steady growth in the United States share of world manufacturing. The line fluctuates over time, and there is no consistent upward trend. Option D is incorrect because the line graph does not compare the growth rates of manufacturing in the United States and Germany in the early 1980s. Therefore, the correct answer is option C.
know more about United States here:
https://brainly.com/question/10497633
#SPJ8
If a rock is 150 million years old and 25% of a radioactive isotope remains, what is the half life of that radioactive isotope (element)?
The half-life of the radioactive isotope in this rock is approximately 51.75 million years.
How to calculate the valueIn this case, the rock is 150 million years old, and 25% of the isotope remains. Therefore, N₀ is 100% and N is 25%.
Using these values in the formula, we get:
t(1/2) = (150 × 10⁶ × log(2)) / log(1/4)
Simplifying further:
t(1/2) = (150 × 10⁶ × 0.693) / (-2)
t(1/2) ≈ 51.75 million years
Therefore, the half-life of the radioactive isotope in this rock is approximately 51.75 million years.
Learn more about rock on
https://brainly.com/question/26046551
#SPJ4
Answer the following Questions Clearly.
6. Define the following terms and name at least one rock sample
belongs to each category: Aphanitic, porphyritic, and
phaneritic.
Aphanitic, porphyritic, and phaneritic are different types of igneous rocks, having different textures and properties.
- Aphanitic: Aphanitic refers to a fine-grained texture of igneous rocks that are composed of crystals too small to be seen with the eye. The rock cools quickly during its formation, resulting in rapid crystal growth. An example of an aphanitic rock is basalt.
- Porphyritic: Porphyritic describes a texture in igneous rocks that exhibit both large and small crystals. The rock undergoes two stages of cooling: initially, slow cooling allows large crystals to form, and then rapid cooling leads to the formation of smaller crystals (groundmass). An example of a porphyritic rock is andesite.
- Phaneritic: It refers to a coarse-grained texture in igneous rocks, where the individual mineral crystals are visible to the eye. The rock cools slowly beneath the Earth's surface, allowing ample time for crystal growth. Granite is an example of a phaneritic rock.
Know more about granite here:
https://brainly.com/question/33085888
#SPJ4
Please explain why you chose the above area(s).
Agriculture
Climate
Disasters
Ecological Forecasting
Energy
Health & Air Quality
Urban Development
Water Resources
Wildfires
I chose the above areas because they are all important and pressing environmental issues that need to be addressed.
How to explain the informationAgriculture is a major driver of climate change and deforestation, and it is also essential for food security. Research in this area can help us to develop more sustainable agricultural practices that reduce our impact on the environment while also meeting the needs of a growing population.
Climate is one of the most pressing environmental issues of our time. Research in this area can help us to understand the causes and effects of climate change, and to develop solutions to mitigate and adapt to its impacts.
Disasters are becoming more frequent and severe due to climate change.
Learn more about agriculture on
https://brainly.com/question/14533586
#SPJ4
2. Another estimate of weathering can be extracted from the rate at which the Grand Canyon has been cut by the Colorado River. The Grand Canyon is over a mile deep and it is estimated that much of its
The average rate at which the Colorado River has cut through the rock layers to form the Grand Canyon is approximately 0.16 to 0.2 inches per year.
By dividing the depth of the Grand Canyon (over a mile) by the estimated time period of carving (5 to 6 million years), we can calculate the average rate of erosion. The result is approximately 0.16 to 0.2 inches per year. This indicates that over millions of years, the Colorado River has slowly eroded and carved through the rock layers, forming the majestic Grand Canyon we see today.
The relatively constant rate of erosion suggests a gradual and ongoing process of weathering and erosion. Factors such as the force and volume of the flowing water, the nature of the rock layers, and other geological factors have influenced the rate of erosion.
This steady erosion over millions of years has shaped the intricate landscape of the Grand Canyon, revealing the geological history and showcasing the power of natural forces at work.
To learn more about Grand Canyon here
https://brainly.com/question/30317656
#SPJ4
The complete question is :
Another estimate of weathering can be extracted from the rate at which the Grand Canyon has been cut by the Colorado River. The Grand Canyon is over a mile deep and it is estimated that much of its carving has occurred over the past 5 to 6 million years. Assuming a relatively constant rate of erosion, what is the average rate at which the Colorado River has been cutting through the rock layers to form the Grand Canyon?