Joe and Jim start at rest at the starting line of a race track. Both runners accelerate at the same rate, but Joe accelerates for twice as long as Jim. Describe the final speed of Joe compared to Jim.

Answer:

450 g =0.9921 lb

Explanation:

Answer: This is the graph we are supposed to fill out.

Explanation:

Answer:

Well it'll change our way of knowledge and more than likely, labor type of jobs that need people will no longer need them, as they don't get hurt, you don't have to pay them or anything like a human being. We'll probably have school online, our shopping online. It'll be a both good and bad thing for us.

Explanation:

w=f×d

w=10N×25m

w=250Nm

Answer:

19 N

Explanation:

From the question given above, the following data were obtained:

Pressure (P) = 1.9 kPa

Length (L) = 10 cm

Force (F) =?

Next, we shall convert 1.9 KPa to N/m². This can be obtained as follow:

1 KPa = 1000 N/m²

Therefore,

1.9 KPa = 1.9 KPa × 1000 N/m² / 1 KPa

1.9 KPa = 1900 N/m²

Thus, 1.9 KPa is equivalent to 1900 N/m².

Next, we shall convert 10 cm to m. This can be obtained as follow:

100 cm = 1 m

Therefore,

10 cm = 10 cm × 1 m / 100 cm

10 cm = 0.1 m

Thus, 10 cm is equivalent to 0.1 m

Next, we shall determine the area of the square. This can be obtained as follow:

Length (L) = 0.1 m

Area of square (A) =?

A = L²

A = 0.1²

A = 0.01 m²

Thus, the area of the square is 0.01 m².

Finally, we shall determine the force that must be exerted on the sensor in order for it to turn red. This can be obtained as follow:

Pressure (P) = 1900 N/m²

Area (A) = 0.01 m²

Force (F) =?

P = F/A

1900 = F / 0.01

Cross multiply

F = 1900 × 0.01

F = 19 N

Therefore, a force of 19 N must be exerted on the sensor in order for it to turn red.

Answer:

KE = 2.17 E3 J

Explanation:

m = 45.2 kg

v = 9.8 m/s

KE = 1/2mv^2

KE = [(45.2 kg)(9.8m/s)^2]/2

KE = 2.17 E3 J

Answer:

I searched it up:

Explanation:

"Structurally, plant and animal cells are very similar because they are both eukaryotic cells. They both contain membrane-bound organelles such as the nucleus, mitochondria, endoplasmic reticulum, Golgi apparatus, lysosomes, and peroxisomes. Both also contain similar membranes, cytosol, and cytoskeletal elements"

Hope this helps ∞<3

Answer:

v₀ = 3.77 [m/s]

Explanation:

This problem can be solved in a simple way by means of the following equation of kinematics.

[tex]y=y_{o}+v_{o}*t+\frac{1}{2}*g*t^{2}[/tex]

where:

y - yo = 0.441 [m]

Vo = initial velocity [m/s]

g = gravity acceleration = 9.81 [m/s²]

t = time = 0.625 [s]

[tex]0.441 = v_{o}*(0.625)-\frac{1}{2} *9.81*(0.625)^{2} \\2.357 = v_{o}*0.625\\v_{o}=3.77[m/s][/tex]

Note: The sign of the acceleration is negative since the movement of the basketball player is against of the gravity acceleration.

Answer:

B

Explanation:

I hope this helps!!! <3

Answer:

B.......

Explanation:

Hope this helped

Answer:

Dimension.

Explanation:

Answer:

1.Sea breeze

2. False

3.

a)Gold nugget

b)Silica sand

Explanation:

1.

The movement of air / wind blowing from the sea to the land is called sea breeze. This occurs due to high temperature differences between the water body and the land. The land is at its maximum heating, causing low pressure zones. High pressure zones in the adjacent water body causes the air to from from the sea to the land to occupy the zones of low pressures created.

2.

Air blows from areas with high pressures to those with low pressures. When an area experiences high temperatures, it causes the environment to have low pressure, creating voids , which are empty spaces that require to be filled. Additionally, the high temperatures heat the air around to cause it to rise creating the voids. Due to low pressure created, air from high pressure zones move in to occupy these zones. Hence air flows from areas with high air pressures to those with low pressures.

3.The ore for Gold is Gold nugget where as that for silicon is silica sand.

Answer:

True

Explanation:

its 13.98. it's simple multiplication 3* 4.66= 13.98

Answer:

A subduction zone is also generated when two oceanic plates collide — the older plate is forced under the younger one — and it leads to the formation of chains of volcanic islands known as island arcs.

Explanation:

Answer:

Explanation:

The formula for weight goes- Weight=Mass*Gravity

We need to re arrange the formula in order to find the mass

so, mass=w/g

~If the person is on Earth then we can substitue the official the value of gravity as 9.8m/s^2 (this value is fixed)

~ The weight given in this question is 7,056 kN , but we need the weight to be in Newtons for the formula to acc work. So converting  7,056 kN to newtons would give 7056000N. (Newton = Kilonewton * 1000)

Now all we need to do is compute these values-

M=  7056000/9.8

M=720000kg

Well, thats the ans

Answer:

320 degrees fahrenheit and 160 degrees celcius

Explanation:

there's a formula that i definately don't remember but it exists

Answer:

Hydraulic systems work by using pressurized fluid to power an engine. These hydraulic presses put pressure on a small amount of fluid in order to generate a large amount of power. That pressure forces it against a piston on the other side of the container.

Answer:

20Kilowatt

Explanation:

Power is the rate of work done per time. It can be calculated using the formula:

Power = Energy/time

Energy = mass × acceleration due to gravity × height ÷ time

Power = mgh/t

Where;

m = mass (1000kg)

g = acceleration due to gravity (10m/s²)

h = height (10m)

t = time (s)

Power = 1000 × 10 × 10 ÷ 5

Power = 20000 watt

In kilowatt = 1000watt, the power is:

20Kilowatt or 20Kw

Answer:

the solid steel ball...more mass more weight more gravity

Explanation:

Answer:

Solid steel ball. It has more mass therefore more force will be acting on it.

Explanation:

Answer:

Friction is a force that opposes motion.

Answer:

3hrs is the answer

Explanation:

time=d/t

t=15/5 hrs

t=3 hrs

Answer:1342

Explanation:

Answer:

Under normal conditions, a magnetic material like iron doesn't behave like a magnet because the domains don't have a preferred direction of alignment. On the other hand, the domains of a magnet (or a magnetized iron) are all aligned in s specific direction.

Velocity is defined as rate of change of displacement wit respect to time.

tangential velocity is  (11/10)πr , where r is radius of circular track.

Since, tangential velocity is,  [tex]=\frac{distance}{time}[/tex]

In one revolution, distance travelled is circumference of circular track.

If radius of circular track is r , then distance travelled in one revolution is, = 2πr  

So, 11 revolutions = 11(2πr) = 22πr

Time taken = 20 second

So, tangential velocity = 22πr/20 = (11/10)πr  meter per second.

Learn more:

https://brainly.com/question/14401457

Answer:

The water hits the wall at a height of 5.38 m

Explanation:

Projectile Motion

It's the type of motion that experiences an object projected near the Earth's surface and moves along a curved path exclusively under the action of gravity.

The object describes a parabolic path given by the equation:

[tex]{\displaystyle y=\tan(\theta )\cdot x-{\frac {g}{2v_{0}^{2}\cos ^{2}\theta }}\cdot x^{2}}[/tex]

Where:

y   = vertical displacement

x   = horizontal displacement

θ   = Elevation angle

vo = Initial speed

The hose projects a water current upwards at an angle of θ=40° at a speed vo=20 m/s.

The height at which the water hits a wall located at x=8 m from the hose is:

[tex]{\displaystyle y=\tan40^\circ\cdot 8-{\frac {9.8}{2*20^{2}\cos ^{2}40^\circ }}\cdot 8^{2}}[/tex]

Calculating:

y = 5.38 m

The water hits the wall at a height of 5.38 m