Is this an alpha or beta decay?

Is This An Alpha Or Beta Decay?

Answers

Answer 1
beta decay

your answer would be beta decay dude to bismuth decaying into polonium as a beta

Related Questions

Choose the options below that are true of standard reduction potential. (select all that apply) Select all that apply: All standard reduction potentials are measured against that of the reduction of hydrogen ions to H2 gas. The standard reduction potential of a cell is determined by subtracting the standard reduction for the reaction at the anode from the standard reduction potential for the reaction at the cathode. Standard reduction potentials are dependent on reaction stoichiometry. The standard reduction potential for a cell is determined by adding the standard reduction potential for the reaction at the anode to the standard reduction potential for the reaction at the cathode.

Answers

Answer:

All standard reduction potentials are measured against that of the reduction of hydrogen ions to H2 gas.

Explanation:

The standard hydrogen electrode (SHE) serves as a sort of reference electrode. All standard electrode potentials of chemical systems are measured against the standard hydrogen electrode whose electrode potential has been arbitrarily set at 0.00 V.

The reduction potential of any other system is measured against the standard hydrogen electrode by connecting that half cell to the standard hydrogen electrode and observing the reading of the voltmeter. The standard hydrogen electrode consists of hydrogen ions of unit activity, hydrogen gas at 1 atm and the system is maintained at a temperature of 298 K.

Standard reduction potentials are measured against that of the reduction of hydrogen ions to [tex]H_2[/tex] gas because hydrogen is chosen as a standard reference and has electrode potential zero.

It is impossible to measure absolute electrode potential for an electrode without forming cell . Therefore it is assumed that standard electrode potential for hydrogen is zero

The standard reduction potential of a cell is determined by subtracting the standard reduction for the reaction at the anode from the standard reduction potential for the reaction at the cathode.

                        [tex]E_c_e_l_l[/tex]°[tex]= E_c_a_t_h_o_d_e[/tex]°[tex]- E_a_n_o_d_e[/tex]°

The species liking to get reduced is defined in term of standard reduction potential.

The species whose standard reduction potential is to be calculated is placed at cathode and at anode hydrogen electrode is used.

To know more about Standard reduction potentials

https://brainly.com/question/8739272

#SPJ4

two advantage of tourist industry?​

Answers

Explanation:

                 Two advantage of Tourist Industry:

Tourism is one of the largest and fastest growing industry in terms of generating more revenues, providing Large number of employment opportunities and only one major ways to development the nation within short spam of time. There are so many facts that, tourism helps making the country renowned all over the world and is called only one weapon to make country strong as from all the aspects.

Although, as we all know that, there are several facts and data's which shows that tourism is only one largest industry throughout world that generated huge amounts of Money than others. So what are the advantages of tourism? Which can be pointed out as following :-

1. Tourism helps to generate more revenues in the country.

2. The tourism can change the nation within a short time period.

3. Tourism helps to provide more numerous kinds of human resources in the nation.

4. Tourism is only one way to develop and to make renowned in the world

what is love?
A)don't hurt me
B)don't hurt me
C)No more

Answers

Answer:

C

Explanation:

I think it is a ever lasting process of pain and happiness cause the ones that are closest to you can make it hurt most but they can also make your day So probably

Where and why the U.S. acid rain damage is the greatest.

Answers

Answer:

Some acid rain occurs naturally, but sulfur dioxide and nitrogen oxide emissions from smokestacks combine with rain to make sulfuric and nitric acid in amounts that harm.

Explanation:

Question 2 of 10. What is Diffusion?​

Answers

Answer:

diffusion: the movement of molecules in a solution from an area of

higher concentration to an area of lower concentration

Diffusion is the movement of particles from where there are more to where there are less. This movement occurs until particles are evenly spread out. While diffusion can be seen in all states of matter, it is most common in liquids and gases.

If this block has a mass of 173.7 grams, then what is this element??

Answers

Answer:

C

I am pretty sure that is the answer

The mass of the given cube of 173.7g and the volume of the box is 9 cm³.Then the density is 19.3 g/cm³. Therefore, the element with this density is gold. Option D is correct.

What is density?

Density of a substance is the ratio of mass to its volume. Thus it tells about how much denser the substance is in the given volume. This physical quantity is dependant on mass, volume temperature and pressure.

The element have their own density corresponding to the mass and volume used. The dimensions of the given box is 3, 3 and 1. Thus volume is the product of this length, breadth and height.

Volume = 3 ×3 × 1

             = 9 cm³.

Mass of the box is given 173.7 grams. Now, the density of the element is calculated as follows:

Density = 173.3 /  9 cm³

             = 19.3 g/cm³.

From the table, it is clear that the this density corresponds to the element gold. Therefore, option D is correct.

To find more about density, refer the link below:

https://brainly.com/question/15164682

#SPJ2

How do scientists gather information about climate conditions millions of years ago?

Answers

Answer:

Paleoclimatology

Step by Step explanation:

is the study of climate records from hundreds to millions of years ago. Information for paleoclimate studies come from natural records rather than instruments: these indirect records of climatic conditions are called proxy records. Coring a tree to gain access to tree ring data.

Which of the following statements is true for all eukarya?
Group of answer choices

A. their cells contain a nucleus.

B. their cells do not contain a nucleus.

C. their cells do not contain a nucleus and they have a different cell wall from bacteria.

D. their cell do not contain a nucleus and they have a similar cell wall when compared to bacteria.

Answers

Answer:

A. their cells contain a nucleus

Explanation:

hope it helps

please mark me as a brainliest

Balance the following equation: _H2+ __02 - __ H20

Answers

Answer:

2

H

2

+

O

2

=

2

H

2

O

Explanation:

From the original equation, you first need to write each component separately.

H

2

+

O

2

=

H

2

O

Left side: H = 2 ; O = 2 (number based on the subscript)

Right side: H = 2 ; O = 1 (number based on the subscripts; no subscript means that the element is just 1)

Notice that the number of H is already balance but the number of O is not. In order to balance the O, you need to multiply the element by 2, but you CANNOT do this by simply changing the subscript.

Hence,

H

2

+

O

2

=

2

H

2

O

Left side: H = 2 ; O = 2

Right side: H = 2 x 2 = 4 ; O = 1 x 2 = 2

Now, notice that the number of O is now balance (both are 2) but the number of H is not (since

H

2

O

is a substance and not an element, you need to multiply everything by 2). So, what to do?

You also multiply the left side H by 2. Hence,

2

H

2

+

O

2

=

2

H

2

O

Left side: H = 2 x 2 = 4 ; O = 2

Right side: H = 2 x 2 = 4 ; O = 1 x 2 = 2

The equation is now balanced.

The volume of a gas is 2250 mL at 290 kPa what will the volume be when the pressure is reduced to .9 atm

Answers

Answer:

7178.22 mL

Explanation:

Applying,

PV = P'V'................. Equation 1

Where P = Initial pressureof gas, V = Initial volume of gas, P' = Final pressure of gas, V' = Final volume of gas.

make V' the subject of the equation

V' = PV/P'.............. Equation 2

From the question,

Given: V = 2250 mL, P = 290 kPa, P' = 0.9 atm = (101×0.9) = 90.9 kPa

Substitute these values into equation 2

V' = (2250×290)/90.9

V' = 7178.22 mL

If i had 6 mol Cl2, how many mol FeCl3 would be made in:
2Fe+3Cl2-->2FeCl3

Answers

Answer:

4 mol FeCl3

Explanation:

[tex]6molCl_{2} *\frac{2mol FeCl_3}{3molCl_2}[/tex] = 4 mol FeCl3

Use the train-track method shown up above. We are simply setting up molar ratios derived from balanced equation to solve this.

which is following is used to cook food?​

Answers

Answer:   A process of cooking food in a pot made from unglazed and natural clay. coddling: Heating food in water kept just below the boiling point.

Explanation:

Which half-reaction shows conservation of charge? * 5 points A) Cu + e– → Cu+ B) Cu2+ + 2e– → Cu C) Cu+ → Cu + e– D) Cu2+ → Cu + 2e–

Answers

Answer:

B) Cu2+ + 2e– → Cu.

Explanation:

Hello there!

In this case, in the regard of redox reactions, we must keep in mind that half-reactions show us how the flow of electrons when an element undergoes a change in its oxidation state, say increasing or decreasing. In such a way, if the element is oxidized, increase the oxidation state, we add electrons on the right side and the contrary if the element is reduced, decrease the oxidation state.

In such a way, we can see that the reaction B) Cu2+ + 2e– → Cu, shows how the Cu2+ cations are reduced by adding electrons to produce Cu and thus, conserve the charge.

Best regards!

propose 3 solutions that address that sources of global warming

Answers

Answer:

The correct answer is - reduce carbon emission, decrease deforestation snd increase plantation, use renewable energy.

Explanation:

Global warming is the process that is caused by human activities to increase the temperature of the earth. It increases the heat of the climate of the earth that leads to a negative impact on the environment. Increasing the greenhouse gas emission leads to trapping heat and cause global warming.

The three major solutions are:

1. reduce carbon and greenhouse gases: The main cause of global warming is the emission of greenhouse gases and an increase in carbon in the atmosphere, so reduce these gas emissions by avoiding fossil fuels that release carbon.

2. reduce deforestation and increase the plantation: trees take carbon dioxide from the environment, So prevent them from cutting and planting new trees will help reducing carbon from the environment.

3. Using renewable energy will help them to not depend on fossil fuels or water waste that will help in reducing global warming.

Convert 7.65 x 10^5 mL into Mega-Liter.

Answers

Answer:

[tex]1 \: ml = \frac{1}{1000} l \\ 7.65 \times {10}^{5} \: ml = \frac{7.65 \times {10}^{5} }{1000} \\ = 765 \: l[/tex]

Can someone please help me on this

Answers

Answer:

it's none because the graph is decreasing like a milf so that why

NaOH+ N2O3---> ___+____​

Answers

Answer:

NaOH+ N2O3---> NaNO2 + H2O

the cells are utilising _______ which are produced during the process of cell respiration

Answers

Answer:

sana nakatulong po sainyo

How to avoid the process of corrosion?


No Links please.
I needASAP!​

Answers

Answer:

5 Different Types of Corrosion Prevention Methods

Barrier Coatings. One of the easiest and cheapest ways to prevent corrosion is to use barrier coatings like paint, plastic, or powder. ...

Hot-Dip Galvanization. ...

Alloyed Steel (Stainless) ...

Cathodic Protection. ...

EonCoat.

What does an increase in temperature do to the reaction rate?

Answers

Answer:

An increase in temperature typically increases the rate of reaction because an increase in temperature will raise the average kinetic energy of the reactant molecules. Therefore, a greater proportion of molecules will have the minimum energy necessary for an effective collision.Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions. It is only these collisions (possessing at least the activation energy for the reaction) which result in a reaction.

Explanation:

Can you please give this answer a brainliest answer please

Balance this equation

Answers

2:1:1:2 is your answer

ASAP:
The estimated atomic mass of silicon could be Choose... amu because the Choose.. abundant isotope is Choose...​

Answers

Answer:

The estimated atomic of silicon is 28.082 a.m.u.

Explanation:

The estimated atomic mass of silicon ([tex]M_{Si, est}[/tex]), in a.m.u., is equal to the weighted average of atomic masses of silicon available in nature and in terms of their abundances:

[tex]M_{Si, est} = r_{1}\cdot M_{Si-28} + r_{2} \cdot M_{Si-29} + r_{3}\cdot M_{Si-30}[/tex] (1)

Where:

[tex]r_{1}[/tex], [tex]r_{2}[/tex], [tex]r_{3}[/tex] - Relative abundance of each isotope, no unit.

[tex]M_{Si-28}[/tex], [tex]M_{Si-29}[/tex], [tex]M_{Si-30}[/tex] - Atomic mass of each isotope, in a.m.u.

If we know that [tex]M_{Si-28} = 27.976\,a.m.u.[/tex], [tex]M_{Si-29} = 28.976\,a.m.u.[/tex], [tex]M_{Si-30} = 29.974\,a.m.u.[/tex], [tex]r_{1} = \frac{92.22}{100}[/tex], [tex]r_{2} = \frac{4.68}{100}[/tex] and [tex]r_{3} = \frac{3.09}{100}[/tex], then the estimated atomic mass of silicon is:

[tex]M_{Si, est} = r_{1}\cdot M_{Si-28} + r_{2} \cdot M_{Si-29} + r_{3}\cdot M_{Si-30}[/tex]

[tex]M_{Si,est} = \left(\frac{92.22}{100} \right)\cdot (27.976\,a.m.u.) + \left(\frac{4.68}{100} \right)\cdot (28.976\,a.m.u.) + \left(\frac{3.09}{100} \right)\cdot (29.974\,a.m.u.)[/tex]

[tex]M_{Si, est} = 28.082\,a.m.u.[/tex]

The estimated atomic of silicon is 28.082 a.m.u.


What quantity of energy would be necessary to boil water with a mass of
123 g that is at 100.00°C ?

Answers

Answer:

i think 554 I think

Explanation:

maybe ..

A gas is contained in a horizontal cylinder with a moveable piston of cross-sectional area 0.33\text{ m}^20.33 m 2 . The region outside the cylinder is at standard ambient temperature and pressure, 298\text{ K}298 K and 1\text{ bar}1 bar. When 2040\text{ J}2040 J of heat flow into the gas, the internal energy of the gas increases by 1380\text{ J}1380 J. Calculate the distance through which the piston moves. You may assume friction is negligible.

Answers

Answer:

0.02 m

Explanation:

∆U = q + w

w = ∆U - q = (1380 - 2040) J = -660 J

w = -p∆V = -pA∆h

∆h = -w/(pA)

p = 1 bar × (100000 Pa/1 bar) = 100000 Pa

∆h = -(-660 J)/(100000 Pa×0.33 m²) = 0.02 m

A gas is contained in a horizontal cylinder with a moveable piston of cross-sectional area 0.33\text{ m}^20.33 m 2. The distance through which the piston moves is 0.02 m.

What is piston ?

Among other related systems, pistons are found in reciprocating engines, reciprocating pumps, gas compressors, hydraulic cylinders, and pneumatic cylinders. It is the moving part that is enclosed in a cylinder and sealed off from the gas by piston rings.

The piston, which is a part of combustion engines, transforms the energy released during combustion into a mechanical action and sends it, via the piston pin and connecting rod, to the crankshaft as a torsional force. The piston in the cylinder goes up and down when the engine is running.

The equation given by

∆ U = q + w

w = ∆ U - q

= ( 1380 - 2040 )

J = -660 J

w = -p∆V

= -pA∆h

∆h = -w / (pA)

p = 1 bar × ( 100000 Pa / 1 bar )

= 100000 Pa

∆h = - ( -660 J) / ( 100000 Pa × 0.33 m² )

= 0.02 m

Thus, The distance through which the piston moves is 0.02 m.

To learn more about piston, follow the link;

https://brainly.com/question/21852769

#SPJ2

Compare the purple and orange arrows. Does more energy go into breaking bonds, or is more energy released when new bonds form?

Answers

Answer:

The breaking of chemical bonds never releases energy to the external environment. Energy is only released when chemical bonds are formed. In general, a chemical reaction involves two steps: 1) the original chemical bonds between the atoms are broken, and 2) new bonds are formed. These two steps are sometimes lumped into one event for simplicity, but they are really two separate events. For instance, when you burn methane (natural gas) in your stove, the methane is reacting with oxygen to form carbon dioxide and water. Chemists often write this as:

CH4 + 2 O2 → CO2 + 2 H2O + energy

Explanation:

here is the answer

2.(05.05 LC)
A chef is serving a lunch special with 1 sandwich and 2 corn cobs per plate. If there are 5 sandwiches and 14 com cobs, what is the theoretical yield? (3 point
O 2 plates
4 plates
5 plates
O 7 plates

Answers

Answer:  5 plates

Explanation:

Because you have 5 sandwiches total

5 plates are the theoretical yield. Hence, option C is correct.

What is a theoretical yield?

The theoretical yield is the maximum possible mass of a product that can be made in a chemical reaction.

The actual yield is the result obtained from the experiment while the theoretical yield is the result obtained from our calculations.

The actual yield of a chemical reaction rarely equals the theoretical yield because some of the amounts are lost during the process.

5 plates are the theoretical yield.

Hence, option C is correct.

Learn more about the theoretical yield here:

https://brainly.com/question/14966377

#SPJ2

In the equation C H4 + O2 C O2 + H2 O, what are the reactants?
O2--> C O2
C O2 + H2 O
C H4 + H2 O
C H4 + O2

Answers

There’s no arrow but i’m gonna assume it will be B

Answer:

                               

Explanation:

CH4+xO2=CO2+2H2O. Find x

Answers

Answer:

x = 2, [tex]CH_{4} + 2O_{2} = CO_{2} + 2H_{2}O\\[/tex]

Explanation:

This question is related to balancing chemical equations.

[tex]CH_{4} + xO_{2} = CO_{2} + 2H_{2}O\\[/tex]

- There must be the same amount of carbons (C), hydrogens (H), and oxygens (O) on each side of the equals sign.

- There is already 1 carbon and 4 hydrogens on each side of the equals sign. The big number in front of the chemical compound multiplies into the individual elements and can be multiplied by the subscripts to get the total number of each element.

- On the right side of the equation, there are 4 oxygens (O), and on the left side, there are 2. In order for there to be 4 oxygens (O) on the left side, there must be a 2 in front of [tex]O_{2}[/tex].

Therefore, x = 2.

[tex]CH_{4} + 2O_{2} = CO_{2} + 2H_{2}O\\[/tex]


Which of the following best describes Avogadro's number?*
A) An equation that can be used to calculate how many atoms are in one mole of
anything
B) A variable that represents the value of the atomic mass relative to one mole of an
element
C) A constant that states how many atoms/molecules are in one mole of anything
D)An expression in scientific notation that represents the average atomic mass of an
element

Answers

Answer:

C) A constant that states how many atoms/molecules are in one mole of anything

Explanation:

Avogadro's number like the name suggests is a constant that states how many atoms/molecules are in one mole of anything.

Which area of science is considered the central science?
chemistry
biology
physics
environmental science

Answers

Answer:

Chemistry

Explanation:

Chemistry is considered the central science.

Which area of science is considered the central science?

Chemistry is sometimes called "the central science" because it's so important to other fields of science, like biology, geology, astronomy, physics, medicine, engineering, materials science, and many other areas of study.

Which branch of science is the most important?

All the branches of science possess their own level of importance, However, physics deals with the fundamental workings of material reality which are central to all other branches of science.

Learn more about chemistry here https://brainly.com/question/24419453

#SPJ2

Other Questions
Which most likely has the greatest conductivity? a warm plastic rod a cool rubber tube a cool silver strip a warm copper wire What is the meaning of the death of Argus? (what is significant about it?) A woman gives birth to a son. What is the probability that her second child will be a girl?A. 0 percentB. 25 percentC. 50 percentD. 100 percent what advanses helped make Rome wealthy Assume the total cost of a college education will be $200,000 when your child enters college in 16 years. You presently have $55,000 to invest. What annual rate of interest must you earn on your investment to cover the cost of your childs college education? What was the feeling of German people towards the Treaty can someone please help me with this ! Why does water have a high cohesion? *Hydrogen bondingO It is not knownO Dispersion forces How does a change in air temperature, air pressure, wind direction, wind speed, and water in the atmosphere affect the weather we observe? The salary of the employees in the office were $15,000; $18,000; $16,000; $14,000;$90,000; and $17,000. Which measure of central tendency is most appropriate tocalculate? paul writes a story (into passive) please help! will mark brainliest How did AbrahamLincoln's viewstoward slaverychange over hislifetime? 17. Where would you be most likely to find modern descendants of the Songhai? This recipe makes four portions of soup. Navina follows this recipe but only wants to make enough for one portion of soup. How much of each ingredient does she need? Recipe: Serves 4 180 g onions 100 g carrots 3 tablespoons of oil 600 g tomatoes 1.2 L vegetable stock Explain why fish would not be able to navigate their surroundings nearly as well if the light-absorbing molecules in their eyes were an order of magnitude larger or smaller than retinal. Which of the following sentences is written correctly?A. The play starts at 7:30; it will last three hours.B. The play starts at 7:30 it will last three hours. drawbacks of trade in ancient china, list 3. PLEASE HURRY!! I WILL GIVE BRAINLYIST!!! Project planning teams use project life cycle models because various types of projects have differing demands. Which of the following sequences of stages is most appropriate for a life cycle model for research and development (R & D) projects? a. define - measure - analyze - improve - control.b. concept definition - demonstration - development - production.c. pre-planning - design - procurement - construction - start up.d. concept - requirements - design - code - test - turnove. What are three valuable skills to develop from English class???