Answer:
No
Explanation:
Despite mercury being a metal, it is a liquid at room temperature. It cannot be an electrolyte. This is because most of the liquids that can conduct electricity or acids bases and salts whereas mercury is a metal.
PLEASE PEOPLE I NEED HELP PLEASE IF YOU SEE THIS HELP ME ! :,( !!!!! PLEASEEEEEEEEE
PLEASE NO LINKSSS !!!!! HELP ME THIS ITS FOR HOMEWORK PLEASE HELPP!
Answer:
year 1 is 5.5%
year 2 is 7.5%
year 3 is 10.2%
Explanation:
since,
length of the transect covered in seaweed / total lenth of transect x 100
then,
0.55 / 10.0 x 100 = 5.5
and
0.75 / 10.0 x 100 = 7.5
and
1.02 / 10.0 x 100 = 10.2
you could also just move the decimal to the right once
:)
a terminal alkyne was treated with nanh2 followed by propyl iodide. the resulting internal alkyne was treated with ozone followed by water, giving only one type of carboxylic acid. provide a systematic, iupac name for the internal alkyne.
The systematic Iupac name for the internal alkyne is : 4-octyne
When only one type of carboxylic acid is made the internal alkyne will be symmetric and the compounds can be 3-hexane or 4-octyne but given that one of the reactants is propyl iodide. Therefore
The Internal alkyne will have an Iupac name 4-octyne
Hence we can conclude that the systematic Iupac name for the internal alkyne is 4-octyne
Learn more about 4-octyne : https://brainly.com/question/24355559
BRAINLIEST TO FIRST RIGHT ANSWER
Students were investigating heat transfer by conduction and they set up the simple experiment you see here. They utilized three spoons made of different materials: the specific heat capacity of each material was recorded in the students' data table. Each spoon was placed in a pot of hot (90°C) water and a pat of butter was placed on the handle of each spoon. The butter melted first on the tin spoon and in about the same amount of time on the plastic and wood spoons. Based on the data table and the experimental results select ALL of the conclusions that are appropriate.
A) Conduction occurred more readily in the tin due to its lower specific heat
capacity
B) Heat transfer via conduction occurred from the hot water to the spoons
and then to the butter,
C) When in contact with hot water, there was no transfer of kinetic energy
through the wood or plastic
D) The atoms in the tin spoon vibrated and collided at a greater rate thon
those in the wood or plastic spoons
E) In all three cases energy s transferred from the faster moving hot water
molecules to the slower moving molecules in the spoon
Answer:
the Answer is A B D
Explanation:
the cunduction in the spoons are equal to all the following answers
Conduction occurred more readily in the tin due to its lower specific heat capacity, Heat transfer via conduction occurred from the hot water to the spoons and then to the butter, The atoms in the tin spoon vibrated and collided at a greater rate thon those in the wood or plastic spoons. Thus option A,B, D are correct.
What is specific heat ?
Specific heat can be measured as the quantity of heat required to increase the temperature of one gram of a substance by one degree Celsius.
The units of specific heat are represented as calories or joules per gram per Celsius degree such as the specific heat of water is 1 calorie per gram per Celsius degree
Specific heat capacity= Heat quantity/ mass × change in temperature.
If Q is the quantity of heat in joules, M is the mass of substance heated,
If ∆O is the change in temperature in Kelvin, Then Q= MC∆O, C is a constant called Specific heat capacity. Therefore, making C the subject of formula:
C= Q /M∆O
Thus option A,B, D are correct.
Learn more about specific heat, here:
https://brainly.com/question/15177263
#SPJ2
What is the percent, by mass, of water in MgSO4.2H20
Answer:51.1%
Explanation:
Mass percent : It is defined as the mass of the given component present in the total mass of the compound. Formula used : First we have to calculate the mass of and . Mass of = 18 g/mole Mass of = 7 × 18 g/mole = 126 g/mole Mass of = 246.47 g/mole Now put all the given values in the above formula, we get the mass percent of in . Therefore, the mass percent of in is, 51.1%
why do solids maintain their shape whereas fluids do not
is change in color a physical change
Answer: A change in color is not always a chemical change. If one were to change the color of a substance in a non-chemical reaction scenario, such as painting a car, the change is physical and not chemical.
Solid → Liquid: Melting
Solid → Gas: Sublimation
Liquid → Gas: Vaporization
Gas → Liquid: Condensation
Explanation:
How did President Wilson anger civil rights advocates?
Answer:
He put segregationists in charge of federal agencies...
Explanation:
...
Answer:
He placed segregationists in charge of federal agencies.
Explanation:
Minerals are _______ substances with a fixed crystal structure and a unique chemical composition. Processing ore sometimes involves _______ or grinding minerals. Prehistoric people used _______ for knives and arrowheads. The average American house contains about _______ pounds of minerals. Early _______ used rocks as simple tools as early as 2. 6 million years ago.
Minerals are solid substances with a fixed crystal structure and a unique chemical composition. Processing ore sometimes involves crushing or grinding minerals. Prehistoric people used flints for knives and arrowheads. The average American house contains about 250,000 pounds of minerals. Early Human culture used rocks as simple tools as early as 2. 6 million years ago.
What are minerals?Minerals are solid substances and are characterized by a fixed crystal structure and a unique chemical composition.
Early hominids used rocks as simple tools before the advent of modern civilization where other materials were used.
Read more on minerals:
https://brainly.com/question/25477252
Answer:
1. naturally occurring
2. crushing
3. flint
4. 250,000
5. hominids
Suppose you have samples of three unknown solids. Explain how you could use their properties to determine whether or not they are ionic solids.
Given a sample of three unknown solids, we would be able to deduce which are ionic solids by their melting and boiling points, conductivity in water, and the insulation they provide.
What are Ionic solids?An ionic solid is a solid formed by ionic bonds. They are the solid version of ionic compounds, which are held together by strong electrostatic energies. What properties do they possess?Among their many properties, ionic solids possess high melting and boiling points.These solids are also known to conduct electricity well when dissolved into water, however, this can be tested after melting them as they will not conduct electricity in a solid state.A final property that we can use to identify them is that they provide a good means of insulation.Each of these properties can be tested and will allow us to determine the ionic solids amongst the samples.Therefore, we can find the ionic solids amongst the samples by testing their melting and boiling points, conductivity in water, and the insulation they provide, given that each of these should provide high values to indicate an ionic solid.
To learn more about ionic solids visit:
https://brainly.com/question/157294?referrer=searchResults
what element generally appears in the formula of an acid
Answer:
Hydrogen, hope this helps :)
Fast pls due rn help fast pls
Answer:
Section a:
1. stratosphere
2. radio waves
3. nitrogen, oxygen
4. humidity
5. smoke, fog
Section b:
1. ozone layer
2. stratosphere
3. carbon dioxide (CO2)
4. smoke
5. tropical areas
Section c:
1. false, it is clear
Hope those help and are all correct
The condition of acidosis can also cause ____________ because the higher H concentration diffuses to the ICF, pushing K towards the ECF.
Answer:
Hyperkalemia
Explanation:
The condition of acidosis can also cause Hyperkalemia because the higher H concentration diffuses to the ICF, pushing K towards the ECF.
. A sample of ammonium phosphate can be prepared by the reaction of aqueous ammonia and phosphoric acid. 3NH3 (aq) + H3PO4 (aq) (NH4),PO4 (aq) 25.0cm of 1.25 mol/dm phosphoric acid is neutralised by 45.3cm of aqueou ammonia (a) Calculate the concentration in mol/dm3 of the ammonia used.
The concentration in mol/dm³ of the ammonia used is 2.07 mol/dm³
Balanced equation3NH₃ (aq) + H₃PO₄ (aq) -> (NH₄)₃PO₄ (aq)
From the balanced equation above,
The mole ratio of the acid, H₃PO₄ (nA) = 1The mole ratio of the base, NH₃ (nB) = 3How to determine the molarity of NH₃ Volume of acid, H₃PO₄ (Va) = 25 cm³Molarity of acid, H₃PO₄ (Ma) = 1.25 mol/dm³Volume of base, NH₃ (Vb) = 45.3 cm³ Molarity of base, NH₃ (Mb) = ?MaVa / MbVb = nA / nB
(1.25 × 25) / (Mb × 45.3) = 1 / 3
31.25 / (Mb × 45.3) = 1 / 3
Cross multiply
Mb × 45.3 = 31.25 × 3
Divide both side by 45.3
Mb = (31.25 × 3) / 45.3
Mb = 2.07 mol/dm³
Learn more about titration:
https://brainly.com/question/14356286
#SPJ1
factors that affect the rate of a chemical reaction include which of the following? i. frequency of collisions of reactant particles ii. kinetic energy of collisions of reactant particles iii. orientation of reactant particles during collisions
To solve such this we must know the concept of double displacement reaction. Therefore, the correct option is option B that is kinetic energy of collisions of reactant particles.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
There are so many factors that affects the rate of reaction, among these, kinetic energy of collisions of reactant particles affect the rate of a chemical reaction. the rate of reaction is directly proportional to the rate of chemical reaction.
Therefore, the correct option is option B.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
HELP PLEASE ASAP ILL GIVE BRAINLEST
Answer:
D
Explanation:
braineist pls???????????
Answer:
C
Explanation:
gram is bigger than atom duh
If I remove the table from under the book, what will happen to the book? Think about Newton’s second law of motion. Is there an acceleration? What caused the acceleration?
Newton’s second law of motion is a dot product of mass and acceleration, if you remove the table from, under the book, gravity will act on the book and pull it downwards to the centre of the earth
Newton's Second law of motion states that "the acceleration of an object depends upon two variables – the net force acting on the object and the mass of the object."
In our case the mass of the book and the force of gravity
Learn more about Newton's Laws of motion:
https://brainly.com/question/10454047
A small container of perfume is opened in a classroom. Soon every student in the room smells the perfume. Explain this in terms of molecules.
Answer: possibly diffusion
Explanation:
all particles are in motion unless at a certain degree so they'd spread throughout the room diluting as they continue to spread out.
Some acids like acetic acid and tartaric acid cannot be tasted
TRUE OR FALSE
The statement is a false.
An acid is a substance which when dissolved in water, produces hydroxonium ion, as the only positive ion.
Some properties of acid include:
They have sour tastes andStrong acids are corrosive.There are two types of acids which includes:
Strong acids: These are the acids that ionizes completely in solution.Weak acid: These are the acids that ionizes incompletely in solution.Examples of weak acid is acetic acid and tartaric acid.
They can be used as food substances like vinegar and naturally occurs on fruit like banana or grape.
Therefore, weak acids such as acetic acid and tartaric acid can be tasted.
Learn more about weak acids here:
https://brainly.com/question/25148363
The given statement is False.
Some acids like acetic acid and tartaric acid can be tasted.
Organic acids, such as acetic, citric, malic, and fumaric acids in fruits and vegetables, and tartaric acid in wine, contribute significantly to the sour flavor of foods and beverages. Many inorganic acids taste sour in dilute solutions.
Tartaric acid is fairly water soluble and has a pronounced tart flavor. Tartaric acid is present naturally in grapes and bananas and has been shown to improve the flavor of grape and lime-flavored beverages. Tartaric acid may aid in the treatment of glucose intolerance and digestion.
Acetic acid is a colorless liquid having a sour flavor. Although it is most frequently associated with vinegar, this acid has a wide range of different applications in a variety of industries. Acetic acid is a colorless liquid that is composed of chemical compounds.
To know more about Acetic acid,
brainly.com/question/26169392
The web site of the Nobel Prize explains that readers who want to inspect the Curies' notebooks must sign a paper
that states that they are aware of the health risks that are involved with handling the notebooks. What health risk is
most likely to occur from handling the notebooks?
O excessive coughing
o anemia
O muscle cramping
O swelling of the joints
Answer: anemia because Marie curie died of anemia
What rule predicts the, stability of a atoms forming compounds.
Answer:The octet rule
Explanation:that there is eight electrons in the valence shell to make it stable.
Explanation:
atom with greater stability have less energy, so a reaction that the stability of the atom will release in the form of heat or light.
What is one element that is not found in the human body, air, or the universe? Brainliest to whoever gets it right! PLEASE HELP! :) 20 points for the question also! :D
Answer:
Technetium. It is only found in the stars.
Explanation:
Sorry, but thats all I could find for tou
The are many elements which are not present in human body. But almost all the discovered elements are there in the universe. But the one which is not present in earth and air is technetium
What is an technetium ?Technetium is the first synthesized element by man in 1937. Technetium has no stable isotopes and it is not found in earth. But it is present in stars. However, rare earth elements such as promethium , francium etc. can be prepared or observed from uranium ores.
There are many elements especially some actinides and lanthanides which are not present in earth naturally existence on starts and other planets.
Human body is made of various elements including carbon, oxygen, nitrogen, various metals like iron, zinc etc. Various enzymes contains different elements but the number of elements which are in the surroundings of human and not inside is larger.
Therefore, all the discovered elements are found in the universe and some them are not present in earth.
To find more about elements, refer the link below:
https://brainly.com/question/24407115
#SPJ5
AC current is produced by which of the following things?
A. Remotes
B. Generators
C. Lights
D. Lasers
Answer:
B
Explanation:
PLEASE HELP QUICK I NEED 14-16 (JUST 6 PROBLEMS) ANSWERED AND FULL WORK SHOWN FOR FACTOR LABEL METHOD ITS 100 POINTS AND I WILL MARK BRAINLYEST.
Answer:
14. 21.51 liters
15. 12.9 centimeters
16. 3400 milliliters
Explanation:
I don't really know how to show the work
how many grams are in 4.07x10^15 molecules of calcium hydroxide
There are 5.01 × 10-⁷grams in 4.07 x 10¹⁵molecules of calcium hydroxide.
HOW TO CALCULATE MASS:
The mass of a substance can be calculated by multiplying the number of moles in the substance by its molecular mass.
However, given that the number of molecules in calcium hydroxide is 4.07 x 10¹⁵molecules, we need to calculate the number of moles in Ca(OH)2 as follows:
no. of moles of Ca(OH)2 = 4.07 x 10¹⁵ ÷ 6.02 × 10²³
no. of moles = 0.676 × 10-⁸
no. of moles = 6.76 × 10-⁹ moles.
Molar mass of Ca(OH)2 = 74.093 g/mol
Mass of Ca(OH)2 = 74.093 × 6.76 × 10-⁹ moles
Mass = 5.01 × 10-⁷grams.
Therefore, there are 5.01 × 10-⁷grams in 4.07 x 10¹⁵molecules of calcium hydroxide.
Learn more about how to calculate mass at: https://brainly.com/question/8101390?referrer=searchResults
A sample of Ammonia gas at 650mmHg and 15 degree has a mass of 56.8g.calculate the volume occupied by the gas. Take N=14, H=1,R=8.3145jk.
Answer:
The first thing we have to do is change and state all the units so that we can use our ideal gas law equation ([tex]PV = nRT[/tex]).
650 mmHg is a pressure unit, we have to convert this to kiloPascals. We know that 760 mmHg gives us 101 kPa.
[tex]650 \ mmHg \ * \ \frac{101kPa}{760 mmHg} = 86 \ kPa[/tex]
P = 86kPa
T = 15°C + 273K = 288K
R (Gas constant) = 8.31 kj/mol
Molar mass of Ammonia ([tex]NH_{3}[/tex]) = (1 x 3) + (14) = 17g/mol
n (moles) = [tex]\frac{mass}{molar \ mass}[/tex] [tex]= \frac{56.8}{17} =[/tex] 3.34 mol
V = ?
Rearrange the equation to solve for Volume:
[tex]V = \frac{nRT}{P}[/tex]
Substitute the values inside:
V = [tex]\frac{(3.34)(8.31)(288)}{(86)} = 93 L (rounded)[/tex]
Therefore 93 L of volume is occupied by the ammonia gas.
What is the formula for the binary ionic compound formed between
zinc and nitrogen.
Answer: Zinc nitride (Zn3N2) is an inorganic compound of zinc and nitrogen, usually obtained as (blue)grey crystals. It is a semiconductor. In pure form, it has the anti-bixbyite structure.
Chemical formula: Zn3N2
Space group: Ia-3, No. 206
EC Number: 215-207-3
Appearance: blue-gray cubic crystals
Explanation:
A wave with a smaller wavelength has _______ energy than one with a larger wavelength.
A wave with a smaller wavelength has UV radiation energy than one with a larger wavelength.
Additional information :- It is harmful rays as a continuous effect on humans can cause skin and eye disorders. ... A large amount of UV rays comes from the sun is absorbed by the ozone layer in the atmosphere. Some other sources of UV rays are black lights, mercury lamps, and tanning lights.Uses of UV Rays
The UV light is found in nature from sunlight and the application of sunlight is present in every field. It is present in both commercial and industrial purposes. Generally, it is used in purifying air, water treatment, skin treatment, indoor gardening, things identifying, and more uses by UV lamps.The UV rays are used in a wide range, ranging from medical therapy to photography.▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
4. If 100.0 g of water is cooled from 25.3°C to 16.9°C, what quantity of
energy has been transferred from the water?
Answer:
Dived the numbers by each other
Explanation:
25.3/19.9
Explain why the melting temperature of boron trichloride is much lower than that of sodium chloride
a) how many moles of o2 are needed to burn 1.50 mol of c8h18?
Answer:
Moles of oxygen needed to burn given amount of octane is 16.875 moles.
Explanation: