In which one element replaces a similar element in a compound

Answer:

A. oxygen

Explanation:

Oxygen is the waste created after photosynthesis.

Answer:

oxygen

Explanation:

photosynthesis are for plants and plants don't need oxygen

Answer:

its D. answers many questions about atoms.

The modern-day quantum model of the atom is better than John Dalton’s model because it "  answers many questions about atoms."

This concept also referred to as the quantum mechanical and wave mechanical model, would be the cornerstone of contemporary atomic theory. The fact that an electron inside an atom may only exist in a limited range of states or energy is analogous to a standing wave.

Dalton proposed that the concept of atoms will be used to explain the laws of conservation of mass as well as definite proportions. Imagining atoms as "solid, massy, hard, impenetrable, moving objects," he claimed that almost all matter would be composed of these tiny, indivisible particles.

Dalton also stated that almost no atom might be formed, converted into another, as well as destroyed. The complex shapes of orbitals also known as electron clouds used in the quantum mechanical atomic model are areas of space where an electron is likely to be present. So rather than being based on certainty, this model would be probability based.

Therefore, the correct answer will be option (D)

To know more about John Dalton’s model and quantum mechanical atomic model

https://brainly.com/question/12708372

#SPJ3

Sulfuric acid undergoes dissociation reaction to produce twice the amount

of hydrogen ions produced by nitric acid in solution.

Reasons:

The concentration of the analytical group = 0.2 M

Volume of reagent = 20 ml

Concentration of the nitric acid to be replaced = 0.1 M

Replacement for the nitric acid = Sulfuric acid

Concentration of the sulfuric acid = Concentration of the nitric acid = 0.1 M

Reaction = Titration

Solution:

Sulfuric acid in solution gives; H₂SO₄ (aq)  ⇄ 2H⁺ (aq) + SO₄²⁻(aq)

For nitric acid, we have; HNO₃ (aq) ⇄ H⁺(aq) + NO₃⁻(aq)

Therefore;

1 mole of sulfuric acid gives 2 moles of hydrogen ions

0.1 M solution of sulfuric acid gives 0.2 moles of hydrogen ions per liter

0.1 moles of hydrogen ions are therefore present in half a liter solution of 0.1 M sulfuric acid solution.

However;

0.1 M of nitric acid gives 0.1 moles of hydrogen ions per liter

Therefore;

Learn more about titration and quantitative chemical analysis here:

https://brainly.com/question/6800262

https://brainly.com/question/6548806

https://brainly.com/question/13031875

Answer:

Dilute the sample

Explanation:

The statement is not entirely accurate. The Bradford assay is commonly used to determine protein concentrations in a sample.

However, it is true that the Bradford assay is more accurate and reliable for measuring protein concentrations at low to moderate levels rather than at very high concentrations.

The Bradford assay is based on the binding of Coomassie Brilliant Blue dye to proteins. The dye undergoes a color change from brown to blue when bound to proteins, allowing for the measurement of protein concentrations. At low protein concentrations, the binding of the dye to proteins is well-calibrated and results in a linear relationship between protein concentration and color intensity, making it suitable for accurate quantification.

At high protein concentrations, the binding capacity of the dye may become saturated, leading to non-linear and less accurate measurements. The excess protein can also cause interference and affect color development. In such cases, dilution or alternative protein quantification methods may be more suitable, such as the BCA assay or the Lowry assay.

Therefore, while the Bradford assay can be used to measure protein concentrations across a range of concentrations, it is generally more reliable for low to moderate protein concentrations.

Learn more about proteins here:

https://brainly.com/question/30986280

#SPJ 6

Answer:

bro thats plagiarism

Explanation:

Answer:

answer is electron cloud model

The answer is c. Matter can be changed, but not created or destroyed.

Answer:

option C two organisms with desired traits are bred

Not every earthquake has a(n) Foreshock, but every earthquake has an Aftershock that occurs in the Same place as the mainshock.

An earthquake is defined as a natural disaster in which there are tectonic plates that are present on the earth's crust collides with each other.

An Earthquake can be minor as well as natural depending upon the frequency it causes the damage. Earthquake is the Shaking of Earth and was much destruction of the economy and manpower.

Surroundings are being disturbed like trees will fall, and buildings will collapse which will cause damage to the economy as well as to human life.

Foreshock is the before shop which happens before the earthquake and aftershock is the other socks that happen after the earthquake

Thus, the correct options are 1. Foreshock, 2. Aftershock, 3. The Same place as.

To learn more about earthquakes, refer to the link:

https://brainly.com/question/1296104

#SPJ2

Answer:

it would be the second one thank me later

Explanation:

Answer:

Volume occupied is approx.  

38 ⋅ ML

Explanation:

Density  ρ = Mass  Volume  And thus  Volume  = Mass  ρ = 1.592 ⋅ l b × 454 ⋅ g ⋅ l b − 1 19.3 ⋅ g ⋅ m L − 1   =   ? ? ⋅ m L

Answer: It is conserved.

Explanation: When the box is pushed across the floor, then floor and box becomes warm which resembles the condition of conservation of energy.

The given problem can be resolved by the concept of energy conservation. The statement of energy conservation says that, "Energy is neither be created nor be destroyed, but it is converted from one form to another.

In the given problem, the person pushes the box across the floor, such that the mechanical energy from the moving arms of person is transferred to the box, and the box and floor becomes warm.

During this process, the energy from the person moving arm is transferred to the box in the form of kinetic energy. And thus kinetic energy is then being transferred to thermal energy or heat energy, due to which the box and floor becomes warm.

Thus, we can conclude that the given case reflects the process of transformation of energy from one state to another, which highlights that during the process, energy is conserved.

Answer:

by using this formula 2×(n)^२

Answer:

M-A=N

Explanation:

M-A=N

Here is an example.

The equation above means that the atomic number (A) subtracted from the average atomic mass (M) equals the combined amount of neutrons and protons. Since we know that 35 17Cl is Chlorine (this is because Chlorine (Cl) is the 17th number on the periodic table and has the average atomic mass of 35), we can insert our data into the equation and end up with the following:

35-17=18.

From here, we can tell that we have a mix of neutrons and protons, with the total being 18. Since the atomic number is 17, we can reasonably assume that there are 17 protons and 1 neutron.

But we still need to find the number of electrons. Fortunately, the number of electrons is always equivilant to the number of protons and the atomic mass, so we know that the number of electrons is 17.

So, we have;

17 Protons

1 Neutron

17 Electrons

Answer:

21

Explanation:

Let us count the number of individual atoms for Na2S2O3 (the compound name):

Na: 2

S: 2

O: 3

This brings us to a total of 7 atoms for one molecule of sodium thiosulfate. For three of these compounds, we get 3*7=21

Answer:

Molecules move up the concentration gradient in facilitated diffusion which requires ATP to be used as molecules naturally move from high to low concentration

Explanation:

Answer:16g

Explanation:A solution's percent concentration by mass,

% w/w

, basically tells you what mass of solute you get per

100 g

of solution.

Answer:

The oxidation number for sulfur in SO2 is +4.

Explanation:

To find the oxidation number of sulfur, it is simply a matter of using the formula SO2 and writing the oxidation numbers as S = (x) and O2 = 2(-2) = -4. Using the rule and adding the oxidation numbers in the compound, the equation becomes x +(-4 ) = 0. Solving for x, it is evident that the oxidation number for sulfur is +4.

Answer:

atomic weight or number of neutrons.

Explanation:

An isotope: is one of two or more forms of the same chemical element.

Different isotopes of an element have the same number of protons in the nucleus, giving them the same atomic number.

A different number of neutrons giving each elemental isotope a different atomic weight.

Answer: i did the ones i knew

1. thorns

2. smell

6. long roots

8. smell

9. thorns

Explanation:

Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.

A chemical reaction is said to have occurred when new substances are formed. The reaction between magnesium chloride  solution and sodium carbonate solution is a double decomposition reaction since the cations exchange anion partners in the product;

MgCl2(aq) + Na2CO3(aq) ------> MgCO3(s) + 2NaCl(aq)

We must note that a single replacement reaction depends on the relative positions of metals in the electrochemical series. Al can react with CuCl2 because Al is more reactive than copper and ahead of Cu in the electrochemical series. On the other hand, Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.

Lear more about electrochemical series: https://brainly.com/question/25749323

Answer

16g

Percent by mass=  mass of solute/mass of solution * 100

Explanation: work out the equation

Answer: 4.123 x 10^22

Explanation:

The first step is to determine how many moles of sulfur hexafluoride (SF6) there are. To do this, you must take the mass of the SF6 (10g) and divide it by the molar mass (146.06).

[tex]10g * \frac{1 mol}{146.06 g}= 0.068465 mol[/tex]

Then you must use Avagadros number to find the number of molecules.

Avagadros number is the number of molecules in 1 mol of a substance, so a simple multiplication will do the trick.

[tex]0.068465mol * \frac{6.022 * 10^{23}}{1mol} = 4.123*10^{22}[/tex]

And that is your answer. There are 4.123 x 10^22 molecules of sulfur hexafluoride in 10g of it.

Answer:

    2H2    +   1 O2   ------>    2H2O

m = 12.7g                              m = ?

Get the number of moles for Hydrogen gas (H2) by dividing the mass by the molar mass (1.01g/mol as listed in the periodic table for its atomic mass)

12.7/1.01 = 12.57 mol of H2

Now use the mole to mole ratio of Hydrogen gas (H2) and water (H2O).

From the balanced equation, we can see that 2 mol of H2 gives us 2 mol of H2O. Since both of the ratios are equal (2:2), the moles we have for hydrogen gas is the same as the moles we get for water.

12.57 mol of H2O

Now that we have the amount of mol for H2O produced in this reaction, we can convert it to grams by multiplying the moles by the molar mass.

Molar mass of H2O = (1.01 x 2) + (16) = 18.02g/mol

12.57 x 18.02 = 226.5g (rounded)

Therefore 226.5g of water will be produced in this reaction

According to law of conservation of mass and stoichiometry, 114.3 g of water are produced if 12.7 grams of hydrogen reacted with an unknown amount of oxygen.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

2 H₂ + O₂[tex]\rightarrow[/tex] 2 H₂O,according to this equation,4 g hydrogen reacts with 32 g oxygen to give 36 g water, thus 12.7 g of hydrogen will produce 12.7×36/4=114.3 g water and hence for this amount of water to be formed  12.7 g of hydrogen reacts with 101.6 g of oxygen which is obtained as 114.3-12.7=101.6 g

Thus, 114.3 g of water is produced.

Learn more about law of conservation of mass,here:

https://brainly.com/question/28711001

#SPJ2

Answer:

The atomic number on the Periodic Table will tell you how many protons are in the nucleus of each atom.

Explanation:

number of electrons and protons should be equal in a neutral atom. Because each electron has a -1 charge, and each proton a +1 charge, the number of each must be the same for the net charge to equal zero.

it's actually made of silicates and believe it or not magnesium is a silicates so the closest would have to be A made of magnesium, iron, and calcium

Answer:

2 hydrogen atoms

Explanation:

Considering the reaction stoichiometry, the correct answer is second option: the total number of moles of water produced from 13. 35 mol of oxygen is 26.7 moles.

The balanced reaction is:

2 H₂ + O₂ → 2 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 1 moles of O₂ produce 2 moles of H₂O, 13.35 moles of O₂ will produce how many moles of H₂O?

[tex]amount of moles of H_{2} O=\frac{13.35 moles of O_{2} x2 moles of H_{2} O}{1 mole of O_{2}}[/tex]

amount of moles of H₂O= 26.7 moles

Finally, the correct answer is second option: the total number of moles of water produced from 13. 35 mol of oxygen is 26.7 moles.

Learn more about stoichiometry: