Answer:
2.500 × 10⁵ cal
Explanation:
1kcal= 1000 cal
From the analysis, the number of calories in each serving of a food with 250 Calories would be 250,000 calories.
According to the illustration:
1 Calories = 1 kilocalories
The food package reports 250 Calories
Hence, 250 Calories = 1 x 250 kilocalories
= 250 kilocalories
According to metrics, 1 kilocalories = 1,000 calories
Thus, 250 kilocalories = 250 x 1000 calories
= 250,000 calories
More on unit conversion can be found here: https://brainly.com/question/19420601
Las Vegas, Nevada is in a desert. How does its rapid population growth affect the
water supply? Name at least two specific ways that human activities affect the quality
of groundwater
Answer:
Many areas of the United States experience explosive population growth. The more people that reside someplace, the more demand there is for water there. Often these urban-growth expansions are unplanned and place extraordinary stress on the water supply system, mainly on the groundwater. The stress often depletes groundwater supply, thereby causing wells to dry up. Then water must be brought from somewhere else to support the local population.
Such situations have occurred all over the United States. For example, increased population growth in the southwestern United States has significantly lowered the water table 50 to 200 feet (depending on the area) since the 1940s. Managing urban growth, efforts to reduce water demand, conservation of the resource, and attempts to increase the water supply all address the problem of exceeding water resource limits.
Human activities affect groundwater quality.
Here are some sources and possible solutions to groundwater pollution:
Agriculture—Reduce usage of pesticides and fertilizers.
Landfills—Monitor for leakage and repair linings.
Underground storage tanks—Remove damaged and unused tanks.
Household wastes—Properly dispose of household hazardous waste.
Septic tank leaks—Properly maintain and repair tanks.
Explanation:
This came from the K12 learning course read this and the answer will be there. I underlined the important parts for the answer.
Explain some of the uses of metals based on their properties.
Answer:
Explain some of the uses of metals based on their properties.
Explanation:
Metals have a shiny or metallic luster and are good conductors of heat and electricity, they can be bent and pounded in various shapes, so they can be used on cars, coins, some pipes, keys, and and a flag.
what is molecular weight of ash?
Answer:
AsH(2.) CHEBI:33104
Explanation:
Molecular Weight is : 75.9296 g/mol
How is thermal energy transferred during conduction? Check all that apply.
Thermal energy is transferred hetween particles that are not touching each other.
Thermal energy is transferred between particles that are in direct contact with each other.
Thermal energy is transferred between objects of different temperatures.
Thermal energy is transferred between objects of the same temperature.
Thermal energy is transferred from slow-moving particles to fast-moving particles.
Thermal energy is transferred from fast-moving particles to slow-moving particles.
Answer:energy
Explanation:needed points sorry
What is the energy of a wave if the frequency is 300. Hz
Answer:
[tex]E=1.98\times 10^{-31}\ J[/tex]
Explanation:
Given that,
The frequency of a wave, f = 300 Hz
We need to find the energy of a wave. The formula for the energy of a wave is given by :
E = hf,
Where h is Planck's constant
[tex]E=6.63\times 10^{-34}\times 300\\\\=1.98\times 10^{-31}\ J[/tex]
So, the energy of the wave is [tex]1.98\times 10^{-31}\ J[/tex].
An atom of an element contains 20 protons, 20 neutrons, and 20 electrons. This element is in Group *
Answer:
it is calcium. it is in group(llA).
Answer:
calcium it lies in group(IIA)hope it is helpful to you
The energy of a pendulum is recorded at different positions in the table below. Use the data in the table to determine the amount of kinetic energy the pendulum had at Position 2. Record your answer below.
Please help me I just want to get this test over with
Answer:
so i got 34.5
Explanation:
Molarity to percent by mass. Convert 1.672 mol/L MgCl2(aq) solution to percent by mass of MgCl2 in the solution. The solution density at this concentration is 1.137 g/mL. Answer to 4 significant figures with appropriate units.
Answer:
[tex]\%m/m=14\%[/tex]
Explanation:
Hello!
In this case, since the molarity of magnesium chloride (molar mass = 95.211 g/mol) is 1.672 mol/L and we know the density of the solution, we can first compute the concentration in g/L as shown below:
[tex][MgCl_2]=1.672\frac{molMgCl_2}{L}*\frac{95.211gMgCl_2}{1molMgCl_2}=159.2\frac{gMgCl_2}{L}[/tex]
Next, since the density of the solution is 1.137 g/mL, we can compute the concentration in g/g as shown below:
[tex][MgCl_2]=159.2\frac{gMgCl_2}{L}*\frac{1L}{1000mL}*\frac{1mL}{1.137g}=0.14[/tex]
Which is also the by-mass fraction and in percent it turns out:
[tex]\%m/m=0.14*100\%\\\\\%m/m=14\%[/tex]
Best regards!
In ionic bonding, atoms__.
A. share electrons
B. are connected by strong electrical forces
C. lose protons and form ions
D. stop moving completely
Plate Tectonics Lab Report
Instructions: In the Plate Tectonic lab you will investigate the interactions between continental and oceanic plates at convergent, divergent, and transform boundaries around the globe. Record your observations in the lab report below. You will submit your completed report.
Name and Title:
Include your name, instructor's name, date, and name of lab.
Kaleb, Ms. Young, 11/25/2020, Plate Tectonics Lab Report
Objective(s):
In your own words, what was the purpose of this lab?
To look at interactions between continental and oceanic plates.
Hypothesis:
In this section, please include the if/then statements you developed during your lab activity for each location on the map. These statements reflect your predicted outcomes for the experiment.
Location One: Select three events that you predict will be observed. If I explore two continental plates at a convergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Two: Select three events that you predict will be observed. If I explore two continental plates at a divergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Three: Select three events that you predict will be observed. If I explore two continental plates at a transform boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Four: Select two events that you predict will be observed. If I explore two oceanic plates at a convergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Five: Select three events that you predict will be observed. If I explore two oceanic plates at a divergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Six: Select two events that you predict will be observed. If I explore two oceanic plates at a transform boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Procedure:
The procedures are listed in your virtual lab. You do not need to repeat them here. Please be sure to identify the test variable (independent variable), outcome variable (dependent variable).
Reminder: Test variable = the item you are changing or manipulating; Outcome variable = the item you are measuring
Test variable (independent variable):
Outcome variable (dependent variable):
Data:
Record the data from each location below.
Location Name
Boundary Type
(C=Convergent, D=Divergent, or T=Transform)
Year Observed
(5, 10, or 20 million years)
Geologic Events Observed
(earthquakes, faults, ocean formation, mountains, volcanoes, island chains, seafloor spreading)
Location One
Himalayas
5
Event 1-
20
Event 2-
Location Two
East Africa
5
Event 1-
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Five: Select three events that you predict will be observed. If I explore two oceanic plates at a divergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Six: Select two events that you predict will be observed. If I explore two oceanic plates at a transform boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Procedure:
The procedures are listed in your virtual lab. You do not need to repeat them here. Please be sure to identify the test variable (independent variable), outcome variable (dependent variable).
Reminder: Test variable = the item you are changing or manipulating; Outcome variable = the item you are measuring
Test variable (independent variable):
Outcome variable (dependent variable):
Data:
Record the data from each location below.
Location Name
Boundary Type
(C=Convergent, D=Divergent, or T=Transform)
Year Observed
(5, 10, or 20 million years)
Geologic Events Observed
(earthquakes, faults, ocean formation, mountains, volcanoes, island chains, seafloor spreading)
Location One
Himalayas
5
Event 1-
20
Event 2-
Location Two
East Africa
5
Event 1-
Please answer quickly!!!
I will award 50 points!
Answer:
In this section, please include the if/then statements you developed during your lab activity for each location on the map. These statements reflect your predicted outcomes for the experiment.
Location One: Select two events that you predict will be observed. If I explore two continental plates at a convergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Two: Select three events that you predict will be observed. If I explore two continental plates at a divergent boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
Location Three: Select three events that you predict will be observed. If I explore two continental plates at a transform boundary, then I will observe:
earthquakes
faults
ocean formation
mountains
volcanoes
island chains
seafloor spreading
This is all I have for now! Hope this can help! :)
A gram of gasoline produces 45 kJ of energy when burned. Gasoline has a density of 0.77 g/mL. How would you calculate the amount of energy produced by burning 48 L of gasoline?
The energy produced in the burning of gasoline = 45 kJ/g. So, amount of energy produced by burning 48 L gasoline = 45 kJ/g×36960 g = 1663200 kJ.
What is the most abundant element on Earth?
A oxygen
B Cobalt
C Carbon
D Iron
5
Any substance represented by a chemical formula
A Homogenous mixture
B Heterogenous Mixture
C elements
D pure substance
Answer:
oxygen is the most abundant element on the earth.
How does one determine a percent composition from an empirical
formula?
A. Divide the atomic mass of the element by its subscript and
multiply by 100%
O B. Divide the mass of the compound by the atomic mass of
the element and multiply by 100%
O C. Divide the subscript of the element by the mass of the
element and multiply by 100%
O D. Divide the total mass of each element by the mass of the
compound and multiply by 100%
The way one determines a percent composition from an empirical formula is to divide the total mass of each element by the mass of the compound and multiply by 100%.
What is empirical formula?Empirical formula is a notation that indicates the ratios of the various elements present in a compound, without regard to the actual numbers.
The empirical formula of a compound is the simplest ratio that can exist between the constituent elements of a compound.
However, the percent composition of a compound can be determined by dividing the total mass of each element by the mass of the compound and multiply by 100%.
Learn more about empirical formula at: https://brainly.com/question/14044066
#SPJ2
what step of the scientific method do we decide whether our hypothesis was correct or not
Describe the process of photosynthesis (including what components get released). ASAP
Answer: It is convenient to divide the photosynthetic process in plants into four stages, each occurring in a defined area of the chloroplast: (1) absorption of light, (2) electron transport leading to the reduction of NADP+ to NADPH, (3) generation of ATP, and (4) conversion of CO2 into carbohydrates (carbon fixation). All four stages of photosynthesis are tightly coupled and controlled so as to produce the amount of carbohydrate required by the plant. All the reactions in stages 1 – 3 are catalyzed by proteins in the thylakoid membrane. The enzymes that incorporate CO2 into chemical intermediates and then convert it to starch are soluble constituents of the chloroplast stroma (see Figure 16-34). The enzymes that form sucrose from three-carbon intermediates are in the cytosol.
Answer:
Glucose gets made using Carbon dioxide, water, and sunlight. Glucose serves as food for the plant. This was the answer to your question
Explanation:
In a vacuum, if a 0.045 kg golf ball is accelerated upward at 2.5 m/s2 by a hair dryer, how much force is required to accelerate the ball?
Answer:
F = 0.553 N
Explanation:
Given that,
Mass of a golf ball, m = 0.045 kg
Acceleration in upward direction, a = 2.5 m/s²
We need to find the force is required to accelerate the ball. Let the force be F. Using the second law of motion as follows :
F = m(a+g)
So,
F = 0.045 (2.5+9.8)
F = 0.553 N
So, the force required to accelerate the ball is 0.553 N.
Most of the mass in an atom is found in the...?
How many moles are in a balloon that is 50.2L, 755 mmHg and -22.0C?
Answer:
n ≈ 2.42 moles
General Formulas and Concepts:
Chem
Ideal Gas Law: PV = nRT
P is pressure in mmHgV is volume in litersn is number of molesR is a constant (62.4 L · mmHg/mol · k)T is temperature in KelvinsK = °C + 273
Explanation:
Step 1: Define
V = 50.2 L
P = 755 mmHg
T = -22.0°C = 251 K
Step 2: Find moles n
(755 mmHg)(50.2 L) = n(62.4 L · mmHg/mol · k)(251 K)
37901 mmHg · L = n(15662.4 L · mmHg/mol)
n = 2.41987 moles
Step 3: Check
We are given 3 sig figs. Follow sig fig rules.
2.41987 moles ≈ 2.42 moles
1. The state of Georgia has seen their water table become lower. What does this mean?
The amount of groundwater is increasing.
Their groundwater is being recharged by rain.
The amount of groundwater is decreasing.
Their groundwater is flowing to confined aquifers.
Answer:
The amount of groundwater is decreasing.
Explanation:
In an ecosystem like the state of Georgia where the water table has become lower it means that the amount of groundwater in the ecosystem is decreasing.
What is an ecosystem?Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/19267717
#SPJ5
A 32.65 g metal is placed in a flask. Liquid toluene is added to the flask so that the total volume of the metal and liquid toluene together is 50.00 mL. The metal and toluene together weigh 58.58 g. The density of toluene at the temperature of the experiment is 0.8640 g/mL. What is the density of the metal?
A ball was massed in a dish. The total mass was 15.6 grams. Treball was placed in a
cylinder containing 26.7 ml of water. The new water level was 38.9 ml. If the mass of the dish is 1.03 grams, what is the mass of the ball?
Answer:
14.57g
Explanation:
Given parameters:
Mass of dish + ball = 15.6g
Initial volume of water in the cylinder = 26.7mL
Final volume of water in the cylinder = 38.9mL
Mass of dish = ?
Unknown
Mass of the ball = ?
Solution;
Since the mass of ball and dish is 15.6g,
Mass of the ball =Mass of ball + dish - mass of the dish
Insert the parameters and solve;
Mass of the ball = 15.6g - 1.03g = 14.57g
Hugh wrote the properties of physical and chemical weathering in the table shown.
Types of Weathering
Physical Weathering
Chemical Weathering
Temperature may break the rocks Can be caused by chemicals in water
Can be caused by snow and pressure Composition of rock remains same
Why is Hugh's table incorrect? (5 points)
a
Chemicals in water cause physical weathering.
b
ос
Temperature is unable to break rocks physically.
Chemical weathering changes the composition of rocks.
Physical weathering is unaffected by snow and pressure.
Od
Answer:
I am sure that the C one is correct
Answer:
how is this college level..im doing this in middle school..
Explanation:
Which of the following is the best definition of a chemical change?
A. A change in a substance where no new substance forms
B. A change in a substance where energy is conserved
C. A change in a substance where a phase change occurs
D. A change in a substance where one or more new substances form
Answer:it's D
Explanation:
A chemical change, unlike a physical change, is the formation of new products or one or more new substances formed from the reactants. Thus, option D is correct.
What is a chemical change?A chemical change is a type of change where the reactants break or combine to form a new product that is different from the reactants. Unlike physical change, they are not reversible and can be seen in combustion, neutralization, decomposition, redox reactions, etc.
It is a change in a matter where the reactant undergoes breaking or forming of the bonds to yield a new product. It is accompanied by changes in temperature, color, precipitation, and odor.
Therefore, a chemical change results in the formation of a new substance.
Learn more about chemical change here:
https://brainly.com/question/18690541
#SPJ5
Describe the role of chloroplasts in photosynthesis. (ASAP)
Answer:
Chloroplasts absorb sunlight and use it in conjunction with water and carbon dioxide gas to produce food for the plant. Chloroplasts capture light energy from the sun to produce the free energy stored in ATP and NADPH through a process called photosynthesis.
Explanation:
A student is using colored beads to model 1 molecule of LaTeX: Ca_3\left(PO_4\right)_2C a 3 ( P O 4 ) 2. The student uses blue beads to model Calcium, red beads to model Phosporus, and green beads to model Oxygen. How many of each color will the student need to make their model?
Answer:
3 blue beads
1 red beads
4 green beads
Explanation:
The compound given:
Ca₃PO₄
Elements in the compound are:
Ca
P
O
Number of atoms are :
Ca - 3
P - 1
O - 4
blue beads to model Calcium
red beads to model Phosphorus
green beads to model Oxygen
3 blue beads
1 red beads
4 green beads
Which two types of energy are formed by the transformation shown in the
photo?
A. Chemical energy
thermal energy
B. Thermal energy -
electrical energy
C. Thermal energy -
chemical energy
D. Chemical energy
-
electromagnetic energy
PREVIOUS
Explanation:
i cant even see any thing
Answer: A and D
Explanation:
A strong electrolyte is one that ________ completely in solution. a) reacts.b) decomposes.c) disappears.d) ionizes.
Answer:
A.
Explanation:
elctrolytes decomposes
Answer:
D. ionizes
Explanation:
Calculate the pH during the titration of 20.00 mL of 0.1000 M trimethylamine, (CH3)3N(aq), with 0.2000 M HClO4(aq) after 9.48 mL of the acid have been added.
Complete Question
Calculate the pH during the titration of 20.00 mL of 0.1000 M trimethylamine, (CH3)3N(aq), with 0.2000 M HClO4(aq) after 9.48 mL of the acid have been added.Kb of trimethylamine = 6.5 x 10-5.
Answer:
The pH is [tex]pH = 9.84[/tex]
Explanation:
From the question we are told that
The volume of trimethylamine, (CH3)3N(aq) is [tex]V_{t} = 20.00mL[/tex]
The concentration of trimethylamine is [tex]C_t = 0.1000 \ M[/tex]
The volume of HClO4(aq) is [tex]V_{h} = 9.48 mL[/tex]
The concentration of HClO4(aq) is [tex]C_h = 0.200 M[/tex]
The Kb value is [tex]K_b = 6.5 * 10^{-5}[/tex]
Generally the the pOH of this reaction is mathematically represented as
[tex]pOH = pK_b + log [\frac{N_h}{N_b} ][/tex]
Here [tex]N_h[/tex] is the number of moles of acid which is evaluated as
[tex]N_h = C_h * V_h[/tex]
=> [tex]N_h = 0.200 * 9.48[/tex]
=> [tex]N_h = 1.896[/tex]
Here [tex]N_t[/tex] is the number of moles of acid which is evaluated as
[tex]N_t = C_t * V_t[/tex]
=> [tex]N_t = 0.100 * 20[/tex]
=> [tex]N_t = 2[/tex]
So
[tex]pOH = -log(K_b) + log [\frac{N_h}{N_b} ][/tex]
[tex]pOH = -log(6.5*10^{-5}) + log [\frac{1.896}{2} ][/tex]
=> [tex]pOH = 4.1639[/tex]
Generally the pH is mathematically represented as
[tex]pH = 14 - pOH[/tex]
=> [tex]pH = 14 - 4.1639[/tex]
=> [tex]pH = 9.84[/tex]
1. What is the molar mass of Al?
Answer:
26.981539 u
Explanation:
Nitrogen gas at 300 k and 200 kpa is throttled adiabatically to a pressure of 100 kpa if the change in kinetic energy is negligble the temperature of the nitrogen after throttling will be:_________
Answer:
The temperature of the Nitrogen after throttling is [tex]T_2 = 300 \ K[/tex]
Explanation:
From the question we are told that
The temperature is [tex]T_1 = 300 \ K[/tex]
The pressure is [tex]P = 200 \ kPa = 200 * 10^{3} \ Pa[/tex]
The pressure after being [tex]P_1 = 100 \ kPa = 100 * 10^{3} \ Pa[/tex]
Generally from the first law of thermodynamics we have that
[tex]Q - W = \Delta U + \Delta K[/tex]
Here [tex]\Delta U[/tex] is the change internal energy which is mathematically represented as
[tex]\Delta U = C_p (T_2 - T_1)[/tex]
Here [tex]C_p[/tex] is the specific heat of the gas at constant pressure
[tex]\Delta K[/tex] is the change kinetic energy which is negligible
Q is the thermal energy which is Zero for an adiabatic process
W is the work done and the value is zero given that the gas was throttled adiabatically
So
[tex]0= \Delta U +0[/tex]
=> [tex]\Delta U = 0[/tex]
=> [tex](T_2 - 300) = 0[/tex]
=> [tex]T_2 = 300 \ K[/tex]