In recent years it has been possible to buy a 1. 0 F capacitor. This is an enormously large amount of capacitance. Suppose you want to build a 1. 1 Hz oscillator with a 1. 0 F capacitor. You have a spool of 0. 25-mm-diameter wire and a 4. 0-cm-diameter plastic cylinder.

How long must your inductor be if you wrap it with 2 layers of closely spaced turns?

The error propagation equation for δk (the kinetic energy) is:

δk = √((1/4v^4) * δm² + m²v² * δv²).

To derive the error propagation equation for δk (the kinetic energy), we first need to understand what error propagation is.

Error propagation is a method used to estimate the uncertainty of a quantity that is derived from several other measured quantities that have uncertainties. In other words, it is a way to determine how the errors of the input quantities affect the error of the output quantity.

Now let's derive the error propagation equation for δk (the kinetic energy):

The kinetic energy (k) of an object can be calculated using the following equation:

k = 1/2mv^2

Where m is the mass of the object and v is its velocity.

We can use the standard error propagation formula to find the uncertainty in k.

This formula is given as:

δk = √((∂k/∂m)² * δm² + (∂k/∂v)² * δv²)

where δm and δv are the uncertainties in the measured values of m and v, respectively.

To find ∂k/∂m and ∂k/∂v, we need to take the partial derivatives of k with respect to m and v.

∂k/∂m = 1/2v²

∂k/∂v = mv

Now we can substitute these values in the error propagation equation:

δk = √((1/2v²)² * δm² + (mv)² * δv²)

Therefore, the error propagation equation for δk (the kinetic energy) is:

δk = √((1/4v^4) * δm² + m²v² * δv²)

To learn more about error propagation , visit:

https://brainly.com/question/30765830

#SPJ11

The magnetic flux if the magnetic field vector is b=(-20 t)i (10 t)k and the area vector is a=(-50 m2)j (8 m2) k is 1000 t j + 80 t k.

The magnetic flux is calculated as follows:

[tex]\phi = \vec{B} \cdot \vec{A}[/tex]

where  

B is the magnetic field vector,  

A is the area vector, and ϕ is the magnetic flux.

In this case, we have:

[tex]\vec{B} = (-20 t)i + (10 t)k[/tex]

and

[tex]\vec{A} = (-50 m^2)j + (8 m^2) k[/tex]

Substituting these values into the equation for magnetic flux, we get:

[tex]\begin{aligned}\phi &= (-20 t)i + (10 t)k \cdot (-50 m^2)j + (8 m^2) k \\&= -20 t \cdot (-50 m^2)j + 10 t \cdot 8 m^2 k \\&= 1000 t j + 80 t k\end{aligned}[/tex]

Therefore, the magnetic flux is a vector with a magnitude of 1000t and a direction of j+k. Note that the magnetic flux is a scalar quantity, so the vector notation is only used to indicate the direction of the flux.

The magnetic flux can also be calculated as follows:

[tex]\phi = \int_A \vec{B} \cdot d\vec{S}[/tex]

where A is the area of the surface, and d

S is a small element of surface area. In this case, the area of the surface is a rectangle with dimensions 50×8 meters. The magnetic field is uniform, so we can calculate the magnetic flux as follows:

[tex]\begin{aligned}\phi &= \int_A \vec{B} \cdot d\vec{S} \\&= \int_{-50}^{50} \int_{-8}^8 (-20 t)i + (10 t)k \cdot dx dy \\&= \int_{-50}^{50} (-20 t) \cdot dy + \int_{-8}^8 (10 t) \cdot dx \\&= 1000 t j + 80 t k\end{aligned}[/tex]

The answer is: 1000 t j + 80 t k

To know more about the magnetic flux refer here :

https://brainly.com/question/15011681#

#SPJ11

Hence, 1309 cycles of the engine are needed to accomplish this task.

Given values:

Work done = Force × Distance moved = mgh,

Force = mg = 375 × 9.8 = 3675 N,

Distance moved, s = 27 m

Rate of work = Power = Work done ÷ time

Rate of work = Fs/t

rate of work = 3675 × 0.0525

rate of work = 193.69 W.

Potential energy = Work done = mgh = 375 × 9.8 × 27 = 98175 J.

Heat ejected by the engine per cycle = 75 J, Heat input to the engine per cycle = 115 J.

We can find the number of cycles of the engine needed to accomplish this task by dividing the potential energy by the amount of heat ejected per cycle.

Therefore: Number of cycles = Potential energy ÷ Heat ejected per cycle= 98175 ÷ 75 = 1309 cycles.

to know more about thermal energy visit:

https://brainly.com/question/3022807

#SPJ11

To determine the proton's speed when it reaches the negative plate, we can utilize the relationship between electric field, force, and acceleration.

The force experienced by a charged particle in an electric field is given by the equation F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. In this case, the proton has a charge of +e (1.6 × 10⁻¹⁹ C) and experiences a force in the direction of the electric field.

Using Newton's second law, F = ma, we can relate the force to the proton's acceleration (a) and mass (m). Since the proton is released from rest, its initial velocity (v₀) is zero. The distance traveled by the proton (d) is equal to the spacing of the parallel plates, which is 2.30 mm (2.30 × 10⁻³ m).

The force on the proton is F = qE = (1.6 × 10⁻¹⁹ C) × (5.50×10⁴ N/C) = 8.80 × 10⁻¹⁵ N. By equating the force to mass times acceleration, we have ma = 8.80 × 10⁻¹⁵ N.

Rearranging the equation to solve for acceleration, we get a = (8.80 × 10⁻¹⁵ N) / (m). The mass of a proton is approximately 1.67 × 10⁻²⁷ kg.

Substituting the values, we find the acceleration of the proton. Using the kinematic equation v² = v₀² + 2ad, we can find the final velocity (v) of the proton when it reaches the negative plate.

Since the initial velocity (v₀) is zero and the distance (d) is known, we can solve for the final velocity. Calculating the expression gives us the speed of the proton when it reaches the negative plate.

Learn more about Using Newton's second law here:

https://brainly.com/question/28261773

#SPJ11

Answer:

Because the hot tea is hot from a microwave or coffee machine when iced tea is cold from ice in the tea.

Explanation:

A light ray can change direction when going from one material to another. That phenomenon is known as refraction.

The phenomenon you are referring to is known as refraction. Refraction occurs when a light ray transitions from one medium to another, causing a change in its direction.

This change in direction is a result of the difference in the speed of light between the two media. When light passes through a medium with a different optical density or refractive index, it experiences a change in speed, causing the light ray to bend or deviate from its original path.

Refraction can be observed in various everyday situations. For example, when light travels from air into water or glass, it undergoes refraction.

The bending of light at the interface between these media is responsible for phenomena like the apparent shift in position of objects submerged in water, the bending of a pencil when placed in a glass of water, or the formation of rainbows.

The amount of bending that occurs during refraction depends on the angle at which the light ray enters the interface and the refractive indices of the two media involved.

Snell's law, which describes the relationship between the incident angle, the refracted angle, and the refractive indices, governs the behavior of light during refraction.

Refraction plays a crucial role in various optical devices, including lenses, prisms, and fiber optics. Understanding and controlling the phenomenon of refraction is essential in fields such as optics, physics, and engineering, enabling the development of technologies and applications that rely on manipulating light for imaging, communication, and scientific research.

Learn more about light ray:

https://brainly.com/question/28908118

#SPJ11

Answer:

will mostly accord at the top of the boiling water my kind sir

Explanation:

Evaporation takes place only at the surface of a liquid, whereas boiling may occur throughout the liquid. In boiling, the change of state takes place at any point in the liquid where bubbles form. The bubbles then rise and break at the surface of the liquid.

The distance between the two 100 kg persons needs to be approximately 8.17 x 10^-4 meters (or 0.817 mm) in order for the force they exert on each other to be equal to 1 N.

To calculate the distance between two 100 kg persons so that the force they exert on each other is equal to 1 N, we can use Newton's law of universal gravitation.

The formula for gravitational force (F) between two objects is:

F = (G * m1 * m2) / r^2

where G is the gravitational constant (approximately 6.672 x 10^-11 N·m^2/kg^2), m1 and m2 are the masses of the objects, and r is the distance between the centers of the objects.

In this case, we want the force to be 1 N, and both persons have a mass of 100 kg. Substituting these values into the formula, we get:

1 N = (6.672 x 10^-11 N·m^2/kg^2 * 100 kg * 100 kg) / r^2

Simplifying the equation:

1 N = (6.672 x 10^-7 N·m^2) / r^2

Rearranging the equation to solve for the distance (r):

r^2 = (6.672 x 10^-7 N·m^2) / 1 N

r^2 = 6.672 x 10^-7 m^2

Taking the square root of both sides:

r ≈ 8.17 x 10^-4 m

Therefore, the distance between the two 100 kg persons needs to be approximately 8.17 x 10^-4 meters (or 0.817 mm) in order for the force they exert on each other to be equal to 1 N. Option B, 6.672 x 10^-7 m, appears to be a typographical error as it corresponds to the value of the gravitational constant rather than the distance.

To learn more about Distance click here

https://brainly.com/question/13034462

#SPJ11

The temperature of the hotter star ([tex]T_h[/tex]) is equal to the square root of the surface temperature of the cooler star (T), and the ratio of the peak-intensity wavelengths is proportional to the inverse cube of the temperature ratio.

Part A: Let's denote the temperature of the hotter star as [tex]T_h[/tex]. According to the Stefan-Boltzmann law, the total energy radiated by a blackbody is proportional to the fourth power of its temperature. Since both stars radiate the same total energy per second, we can write:

[tex]T_h^4 = T^4[/tex]

Taking the fourth root of both sides, we get:

[tex]T_h = T^{(\frac {1}{4})}[/tex]

Part B: The peak intensity wavelength (λmax) of a blackbody radiation is inversely proportional to its temperature.

According to Wien's displacement law, we can express the ratio of peak-intensity wavelengths ([tex]\lambda_{max, hot}/ \lambda_{max, cool}[/tex]) as the ratio of their temperatures:

[tex]\frac{\lambda_{max, hot}}{ \lambda_{max, cool}} = \frac{T_h}{T}[/tex]

Substituting the relationship we derived in Part A, we have:

[tex]\frac{\lambda_{max, hot}}{ \lambda_{max, cool}} = \frac{T^{\frac{1}{4}} }{T}[/tex]

Simplifying, we get:

[tex]\frac{\lambda_{max, hot}}{ \lambda_{max, cool}} = T^{\frac{-3}{4}} }[/tex]

Learn more about wavelength here:

https://brainly.com/question/30532991

#SPJ4

Steve Tootall's height is 86 inches. To calculate his height in inches, we convert feet to inches and then add the remaining inches.

Steve Tootall's height is given as 7 feet 2 inches. To calculate his height in inches, we convert feet to inches and then add the remaining inches.

1 foot is equal to 12 inches. So, 7 feet would be 7 * 12 = 84 inches.

Adding the remaining 2 inches, Steve's height in inches would be:

84 inches + 2 inches = 86 inches.

Therefore, Steve Tootall's height is 86 inches.

To learn more about Height click here

https://brainly.com/question/21836055

#SPJ11

The estimated length of the refracting telescope is approximately 412.8 cm.

The magnification (M) of a telescope is given by the formula: M = focal length of the objective lens / focal length of the eyepiece. In this case, the magnification is 85, and the focal length of the eyepiece is 4.8 cm.

Rearranging the formula, we can find the focal length of the objective lens:

focal length of the objective lens = M × focal length of the eyepiece = 85 × 4.8 cm = 408 cm.

Now, to estimate the length of the telescope, we need to consider the formula for the total length of a refracting telescope:

total length = focal length of the objective lens + focal length of the eyepiece.

Substituting the values, we have:

total length = 408 cm + 4.8 cm = 412.8 cm.

Please note that the actual length of a refracting telescope depends on various factors, such as the design, focal lengths, and positioning of the lenses, which may differ from the assumptions made in this response.

Learn more about telescope:

https://brainly.com/question/18300677

#SPJ11

If a buffer solution is 0.210 m in a weak acid and 0.470 m in its conjugate base. The pH of the buffer solution is approximately 4.53.

To determine the pH of a buffer solution, we can use the Henderson-Hasselbalch equation, which is given by

pH = pKa + log ([A-] / [HA])

Where:

pH is the logarithmic measure of the hydrogen ion concentration in the solution.

pKa is the negative logarithm of the acid dissociation constant (Ka) of the weak acid.

[A-] is the concentration of the conjugate base.

[HA] is the concentration of the weak acid.

In this case, the concentration of the weak acid ([HA]) is 0.210 M, and the concentration of the conjugate base ([A-]) is 0.470 M. The acid dissociation constant (Ka) is given as 6.7 × [tex]10^{-5}[/tex].

First, let's calculate the pKa

pKa = -log(Ka) = -log(6.7 × [tex]10^{-5}[/tex]) = 4.18

Next, substitute the given values into the Henderson-Hasselbalch equation:

pH = 4.18 + log(0.470 / 0.210) = 4.18 + log(2.238) = 4.18 + 0.35

pH = 4.53

Therefore, the pH of the buffer solution is 4.53.

To know more about pH here

https://brainly.com/question/17742323

#SPJ4

The distance between the lens and the image is 1.0 meter.

To find the distance between the lens and the image formed by a converging lens, we can use the lens formula:

1/f = 1/v - 1/u

Where:

f is the focal length of the lens

v is the distance of the image from the lens (positive if the image is on the same side as the observer, negative if the image is on the opposite side)

u is the distance of the object from the lens (positive if the object is on the same side as the observer, negative if the object is on the opposite side)

In this case:

Focal length (f) = 0.50 meters

Distance of the object (u) = 1.0 meter

Let's substitute the given values into the lens formula:

1/0.50 = 1/v - 1/1.0

2 = 1/v - 1

2v = v - 1

v = 1

Therefore, the distance between the lens and the image = 1.0 m.

Learn more about image distance here:

https://brainly.com/question/29659384

#SPJ11

The electric and magnetic field amplitudes of an electromagnetic wave can be calculated using the power output of the source and the distance from the source. We can use the formula:

P = (1/2)ε₀cE₀²A,

where P is the power output, ε₀ is the permittivity of free space (8.854x10⁻¹² C²/(N·m²)), c is the speed of light (3x10⁸ m/s), E₀ is the electric field amplitude, and A is the surface area of a sphere with radius R.

First, let's calculate the surface area of the sphere at a distance of 15.0 m:

A = 4πR² = 4π(15.0 m)² ≈ 2827.43 m².

Now, rearranging the formula, we can solve for E₀:

E₀² = (2P) / (ε₀cA) = (2 * 960 W) / (8.854x10⁻¹² C²/(N·m²) * 3x10⁸ m/s * 2827.43 m²).

Calculating this expression gives us E₀² ≈ 8.76x10⁻⁶ N²/C².

Taking the square root, we find:

E₀ ≈ 9.36x10⁻⁴ N/C.

Finally, we can use the relationship between the electric and magnetic field amplitudes in an electromagnetic wave:

B₀ = E₀ / c,

where B₀ is the magnetic field amplitude.

Substituting the values, we get:

B₀ ≈ (9.36x10⁻⁴ N/C) / (3x10⁸ m/s) ≈ 3.12x10⁻¹² T.

Therefore, the electric field amplitude at a distance of 15.0 m from the source is approximately 9.36x10⁻⁴ N/C, and the magnetic field amplitude is approximately 3.12x10⁻¹² T.

To know more about  electromagnetic visit :

https://brainly.com/question/1408043

#SPJ11

Answer:

Hereeeeeeeeeeeeeeeeeee

Answer:

30. $3.85

31. $2.22

Explanation:

30. The time duration of the kitchen clock is left on = All day = 24 hours

The power rating of the kitchen clock, P = 4 watts

The electricity cost in Alberta, R = $0.11 per kilowatt hour

The total number of hours the kitchen clock is on during the year, 't', is given as follows;

t = Number of hours per day × Number of days per year

∴ t = 24 hours/day × 365 days/year = 8,760 hours

The energy consumption of the kitchen clock, per year, E = P × t

∴ E = 4 watts × 8,760 hours = 35,040 watts-hour = 35.040 kw·h

The cost of operating the clock in one year, C = E × R

∴ Operating cost for the kitchen clock

∴ C = 35.040 kw·h × $0.11/(kw·h) = $3.8544 ≈ $3.85

The cost of operating the clock in one year, C ≈ $3.85

31. The power rating of the ghetto blaster, P = 28 watts

The time duration the ghetto blaster was on during an average month = All day = 24 hours

The number of days during an average month, n = 30 days

The cost of electricity in Alberta, R = $0.11 per kilowatt hour

The time in hours the ghetto blaster was on, t = 30 days/month × 24 hours/day

∴ t = 720 hours per month

The cost of operating the ghetto blaster in one month, C = P × t × R

∴ C = 28 W × 720 hours × 1 kw·h/(1000 w·h)× $0.11/(kw·h) = $2.2176

∴ The cost of operating the ghetto blaster in one month, C ≈ $2.22

Answer: D all of the above

Explanation: Coal, Graphite, Diamond are all allotropes of Carbon. Hope this helps :)

A hydrogen atom in the n=4 state decays to the n=1 state. The wavelength of the photon that the hydrogen atom emits is 97.2 nm.

To calculate the wavelength of the photon emitted when a hydrogen atom transitions from the n=4 state to the n=1 state, we can use the Rydberg formula:

1/λ = R * (1/n₁² - 1/n₂²)

Where:

λ is the wavelength of the photon

R is the Rydberg constant for hydrogen (approximately 1.097 x 10⁷ m⁻¹)

n₁ is the initial energy level (n=4)

n₂ is the final energy level (n=1)

1/λ = 1.097 x 10⁷ m⁻¹ * (1/16 - 1)

1/λ = 1.097 x 10⁷ m⁻¹ * (-15/16)

λ = -0.972×10⁷ m⁻¹

Since wavelength cannot be negative, we take the absolute value

λ ≈ 97.2 nm.

Therefore, the wavelength of the photon emitted by the hydrogen atom is approximately 97.2 nm.

To know more about hydrogen atom here

https://brainly.com/question/30886690

#SPJ4

a) Sketching the influence lines for the force in members BE, BC, and DA in a truss bridge requires a visual representation. Influence lines show the variation of forces in a structure due to the movement of a load.

Please refer to structural engineering resources or software for accurate sketches and graphical representations of the influence lines for these specific members in a truss bridge. These resources will provide detailed illustrations based on the structural dimensions, member properties, and load positions. Influence lines are valuable tools for structural engineers as they help identify critical load positions, assess the structural response, and determine the maximum forces experienced by different members. Please consult reliable structural engineering references, textbooks, or appropriate software that specifically address truss bridge analysis and design to obtain accurate sketches of the influence lines for members BE, BC, and DA. These resources will provide the necessary diagrams and detailed explanations based on the specific truss bridge configuration and load positions.

To learn more about variation of forces, Click here:

https://brainly.com/question/30417230

#SPJ11

Answer:

im still in elementry so you got to do it yo self

Explanation:

so me confused

Answer:

Log burning in a fire. Burning wood is an example of a chemical reaction in which wood in the presence of heat and oxygen is transformed into carbon dioxide, water vapor, and ash.

Explanation:

The statement is true. When one projects an object vertically upward from the ground, that object will reach a maximum height h before it is brought back down to earth by the force of gravity.

The laws of motion, more especially the principles of projectile motion, are the ones that rule over this behaviour. When the object is propelled forward, its initial velocity works against the gravitational pull, causing it to slow down until it reaches its highest point. This continues until the object has reached its highest position. After reaching this point, the object's velocity stops being positive and it begins a free fall towards the ground as a result of the force of gravity.

The initial velocity of the object, the angle at which it is launched, and the force of gravity all play a role in determining the maximum height h that it is possible to reach. Kinematic equations can be used to determine the answer to this question. It is essential to keep in mind, however, that the maximum height will also be determined by any external forces that are operating on the object, such as the resistance posed by the air.

To know more about gravity

https://brainly.com/question/940770

#SPJ4

Answer: for insulation of heat

Explanation:

Windows in cold countries have double glazing windows to provide a barrier against the outside temperature by creating a buffer zone between two glasses.

The air or any other gas-filled between the glasses act as an insulator and offer great resistance to outside temperature thereby maintaining the inside temperature intact.

The two cars will meet at a distance of 50 km from city A, and the meeting will occur 2 hours after they start moving.

To determine when and where the two cars meet, we need to calculate the time it takes for them to meet and then use that time to find the meeting location.

In this case:

Distance between cities A and B = 180 km

Velocity of the car starting from city A = 25 km/hr

Velocity of the car starting from city B = 65 km/hr

Let's assume the meeting point is at a distance of x km from city A. Since the total distance between the two cities is 180 km, the distance traveled by the car starting from city A is x km, and the distance traveled by the car starting from city B is (180 - x) km.

Using the formula:

Time = Distance / Velocity

The time taken by the car starting from city A to reach the meeting point is:

Time for car from A = x km / 25 km/hr = x/25 hr

The time taken by the car starting from city B to reach the meeting point is:

Time for car from B = (180 - x) km / 65 km/hr = (180 - x)/65 hr

Since the two cars meet at the same time, we can set their time equations equal to each other:

x/25 = (180 - x)/65

Now, we can solve this equation to find the value of x:

65x = 25(180 - x)

65x = 4500 - 25x

90x = 4500

x = 50

Therefore, the meeting point is 50 km from city A.

To find the time it takes for the cars to meet, we can substitute this value of x back into either of the time equations:

Time = Distance / Velocity

Time = 50 km / 25 km/hr

Time = 2 hours

So, the two cars will meet after 2 hours.

Learn more about distance here:

https://brainly.com/question/29771071

#SPJ11

Answer:C

Explanation:I think sorry if it’s wrong

a) The work function of the metal is 2.00 eV.

b) When the photon energy is adjusted to 6.10 eV, the maximum kinetic energy of the photoelectrons will be 4.10 eV.

a) The work function (Φ) of the metal can be determined by subtracting the maximum kinetic energy (KEmax) of the photoelectrons from the energy of the incident photons (Ephoton).

Given:

The energy of incident photons (Ephoton) = 4.00 eV

The maximum kinetic energy of photoelectrons (KEmax) = 2.00 eV

To find the work function (Φ):

Φ = Ephoton - KEmax

Φ = 4.00 eV - 2.00 eV

Φ = 2.00 eV

Therefore, the work function of the metal is 2.00 eV.

b) To calculate the maximum kinetic energy of photoelectrons when the photon energy is adjusted to 6.10 eV, we use the same formula as in part (a).

Given:

The energy of incident photons (Ephoton) = 6.10 eV

To find the maximum kinetic energy of photoelectrons (KEmax):

KEmax = Ephoton - Φ

Using the previously determined work function (Φ) of 2.00 eV:

KEmax = 6.10 eV - 2.00 eV

KEmax = 4.10 eV

Therefore, when the photon energy is adjusted to 6.10 eV, the maximum kinetic energy of the photoelectrons will be 4.10 eV.

a) The work function of the metal is 2.00 eV.

b) When the photon energy is adjusted to 6.10 eV, the maximum kinetic energy of the photoelectrons will be 4.10 eV.

To learn more about kinetic, visit    

https://brainly.com/question/1135367

#SPJ11

Answer:

Option (a) is correct

Explanation:

The acceleration of an object is defined as the rate of change of velocity. Mathematically, it can be written as :

[tex]a=\dfrac{v-u}{t}[/tex]

Where

v and u are final and initial velocity

It is clear that if there is some change in velocity, it means the object is experiencing either acceleration or deceleration. Hence, the correct option is (a).

Answer:

a

Explanation:

Part (a) involves writing an expression for the work done by force F as the box moves a horizontal distance d. Part (b) requires calculating the amount of work done in moving the box 4.1 m. Part (c) asks for the speed of the box at a distance of 4.1 m, assuming a frictionless surface.

(a) The work done by a force is given by the formula W = Fd cos(θ), where W represents work, F is the force applied, d is the distance moved, and θ is the angle between the force and the displacement. In this case, since the force is applied horizontally ([tex]\theta[/tex] = 0), the expression for the work done by force F becomes W = Fd cos(0) = Fd.

(b) To calculate the work done in moving the box 4.1 m, we can substitute the given values into the equation from part (a). Thus, the work done is W = (124 N)(4.1 m)(cos 0) = 124 N * 4.1 m = 508.4 J (joules).

(c) If the surface is frictionless, the work done is converted entirely into kinetic energy. We can use the work-energy principle to find the speed of the box. The work done (508.4 J) is equal to the change in kinetic energy. Assuming the initial speed is zero, the final kinetic energy is 508.4 J. We can calculate the speed using the equation [tex]KE = (1/2)mv^2[/tex], where KE is the kinetic energy, m is the mass, and v is the speed. Rearranging the equation, [tex]v = \sqrt(2KE/m)[/tex]. Given the mass m = 87 kg, the speed at d = 4.1 m can be calculated.

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ11

Answer:

d=v1t - .5at^2

d=4.88 x .872 - 0.5 x (4.88/0.872) x 0.872^2

d=4.255 - 2.12

d= 2.135m

Explanation:

acceleration is negative because she is slowing down.

The electron drift speed in the iron wire is approximately 4.49 mm/s. When electrons are subjected to an electric field they do move randomly, but they slowly drift in one direction, in the direction of the electric field applied. The net velocity at which these electrons drift is known as drift velocity.

The formula to calculate the electron drift speed is:

v_d = I / (n * A * q)

Where:

- v_d is the electron drift speed

- I is the electric current

- n is the number density of charge carriers (electrons)

- A is the cross-sectional area of the wire

- q is the charge of an electron

Given:

- I = 2.00 × 10^20 electrons

- Diameter of the wire = 3.20 mm

- Time = 4.50 s

First, we need to calculate the current (I) in Amperes:

I = (2.00 × 10^20 electrons) / (4.50 s)

I ≈ 4.44 × 10^19 A

Next, we need to determine the cross-sectional area (A) of the wire. The wire is cylindrical in shape, so we can use the formula for the area of a circle:

A = π * (diameter/2)^2

A = π * (3.20 mm/2)^2

A ≈ 8.03 mm^2

Converting the cross-sectional area to square meters:

A = 8.03 mm^2 * (1 m^2 / 1000 mm^2)

A ≈ 8.03 × 10^-6 m^2

The number density of charge carriers (n) is given by the ratio of the number of electrons (I) to the volume of the wire. Since we don't have the volume, we cannot calculate the exact number density. However, for a wire, the number density is typically on the order of 10^28 to 10^29 electrons per cubic meter.

Lastly, we know that the charge of an electron (q) is approximately 1.6 × 10^-19 C.

Using the formula for electron drift speed, we can calculate:

v_d = (4.44 × 10^19 A) / (10^28 electrons/m^3 * 8.03 × 10^-6 m^2 * 1.6 × 10^-19 C)

v_d ≈ 4.49 mm/s

Therefore, the electron drift speed in the iron wire is approximately 4.49 mm/s.

To know more about speed visit :

https://brainly.com/question/13943409

#SPJ11