In a breeding experiment, white chickens with small combs were mated and produced 190 offspring of the types shown in the accompanying table. Are these data consistent with the Mendelian expected ratios of 9:3:3:1 for the four types? Use chi-square test at alpha=0.10. Type Number of offspring White feathers, small comb 111 White feathers, large comb 37 Dark feathers, small comb 34 Dark feathers, large comb 8 Total 190

y = 1 ± 9 sqrt(1 - (x/9)^2)

This is the equation of the curve in terms of x and y.

(x - 0)^2 + (y - 1)^2 = 9^2

This is the equation of a circle centered at (0, 1) with radius 9.

a. To eliminate the parameter t, we can use the trigonometric identity cos^2(t) + sin^2(t) = 1 to solve for cos(t) in terms of sin(t):

cos^2(t) = 1 - sin^2(t)
cos(t) = ±sqrt(1 - sin^2(t))

Since the x-coordinate of the curve is given by x = 9 cos(t), we can substitute the expression for cos(t) and obtain:

x = ±9 sqrt(1 - sin^2(t))

Squaring both sides and simplifying, we get:

x^2 + 9^2 sin^2(t) = 81

Solving for sin(t) and substituting into the expression for y, we obtain:

y = 1 ± 9 sqrt(1 - (x/9)^2)

This is the equation of the curve in terms of x and y.

b. The curve is a circle centered at (0, 1) with radius 9. The positive orientation is counterclockwise around the circle. The starting point is (9, 1) and the ending point is (-9, 1).

To see this, we can rewrite the equation of the curve in standard form:

(x - 0)^2 + (y - 1)^2 = 9^2

This is the equation of a circle centered at (0, 1) with radius 9. The positive orientation is counterclockwise around the circle because the parameter t increases in a counterclockwise direction. The starting point occurs when t = 0, which corresponds to x = 9 and y = 1, and the ending point occurs when t = pi, which corresponds to x = -9 and y = 1.

Visit to know more about Equation:-

brainly.com/question/22688504

#SPJ11

The rate of change of the area of the rectangle is 12 square inches per second. To find the rate of change of the area, we need to use the formula for the area of a rectangle, which is A = length x width.

At any given time, the length and width of the rectangle can be represented by l and w, respectively.

Given that the length is increasing by 6 in/sec and the width is shrinking at 3 in/sec, we can express their rates of change as dl/dt = 6 in/sec and dw/dt = -3 in/sec (since the width is decreasing).

Now, we can use the product rule of differentiation to find the rate of change of the area:

dA/dt = (d/dt)(lw)
      = l(dw/dt) + w(dl/dt)   (product rule)
      = 10(-3) + 3(6)            (substituting l = 10, w = 3, dl/dt = 6, and dw/dt = -3)
      = 12 in^2/sec

Therefore, the rate of change of the area of the rectangle is 12 square inches per second.

Learn more about rectangle here:

/brainly.com/question/20968176

#SPJ11

Answer:

41%

Step-by-step explanation:

The volume of the aquarium is:

V = l × w × h

V = 13 in × 5 in × 4 in

V = 260 cubic inches

The volume of water in the aquarium is given as 153 cubic inches. Therefore, the volume of empty space in the aquarium is:

260 - 153 = 107 cubic inches

To find the percentage of the aquarium that is empty, we can divide the volume of empty space by the total volume and multiply by 100:

Empty space percentage = (Volume of empty space / Total volume) × 100

Empty space percentage = (107 / 260) × 100

Empty space percentage ≈ 41%

Therefore, the aquarium is approximately 41% empty.

The store should charge $82.5 + $3(23.5 - 22.5) = $85 for each barstool to maximize its profit.

(a) Let x be the number of $3 increases in price, then the demand function can be expressed as:

r(p) = 120 - 10x,

and the price function can be expressed as:

p(x) = 60 + 3x.

Substituting p(x) into r(p), we get

r(x) = 120 - 10x = 120 - 10((p-60)/3) = 150 - (10/3)p.

So the demand function can be expressed as:

r(p) = 150 - (10/3)p.

(b) The revenue function can be expressed as:

R(p) = p * r(p) = p(150 - (10/3)p) = 150p - (10/3)p^2.

(c) To maximize revenue, we need to find the price that maximizes the revenue function R(p).

Taking the derivative of R(p) with respect to p and setting it equal to zero, we get:

dR/dp = 150 - (20/3)p = 0

Solving for p, we get p = 22.5.

Therefore, the store should charge $82.5 for each barstool to maximize its revenue.

(d) To maximize profit, we need to consider the cost function in addition to the revenue function.

Let C(p) be the cost function, then

C(p) = 32r(p) = 32(150 - (10/3)p) = 4800 - (320/3)p.

The profit function can be expressed as:

P(p) = R(p) - C(p) = 150p - (10/3)p^2 - 4800 + (320/3)p = -(10/3)p^2 + (470/3)p - 4800.

To maximize profit, we take the derivative of P(p) with respect to p and set it equal to zero:

dP/dp = -(20/3)p + (470/3) = 0

Solving for p, we get p = 23.5.

Therefore, the store should charge $82.5 + $3(23.5 - 22.5) = $85 for each barstool to maximize its profit.

To learn more about maximizes visit:

https://brainly.com/question/14568010

#SPJ11

The probability that at least one computer fails to solve the problem is approximately 0.431 or 43%, which is option (b).

The probability that a single computer solves the problem is 0.92. Therefore, the probability that a single computer fails to solve the problem is:

P(failure) = 1 - P(success) = 1 - 0.92 = 0.08

Since the computers are working independently, the probability that all ten computers solve the problem is:

P(all computers solve) = 0.92¹⁰= 0.569

The probability that at least one computer fails to solve the problem is the complement of the probability that all computers solve the problem:

P(at least one computer fails) = 1 - P(all computers solve) = 1 - 0.569 = 0.431

Therefore, the probability that at least one computer fails to solve the problem is approximately 0.431 or 43%, which is option (b).

Learn more about “ probability “ visit here;

https://brainly.com/question/30034780

#SPJ4

The sum of the given series is 1/2.

To find the sum of the series ∑n=1[[tex]\infty[/tex]](3n 6n10n), we can start by writing out the first few terms of the series and look for a pattern:

a₁ = 3/6/10

a₂ = 3²/6²/10²

a₃ = 3³/6³/10³

...

We can see that the numerator and denominator of each term are powers of 3, 6, and 10 respectively. Therefore, we can write the general formula for the nth term of the series as:

a ₙ = (3ⁿ)/(6ⁿ)/(10ⁿ)

We can simplify this expression by writing 6 and 10 as powers of 3:

a ₙ = (3ⁿ)/((3²ⁿ))/(3ⁿ))0

Simplifying further, we get:

a ₙ = 1/(3ⁿ)

Now we have a geometric series with a common ratio of 1/3. The formula for the sum of an infinite geometric series with a common ratio r (where |r| < 1) is:

sum = a₁ / (1 - r)

where a₁ is the first term of the series.

In this case, a₁ = 1/3 and r = 1/3. Therefore, the sum of the series is:

sum = (1/3) / (1 - 1/3) = (1/3) / (2/3) = 1/2

Therefore, the sum of the series ∑n=1[[tex]\infty[/tex]](3n 6n10n) is 1/2.

Learn more about series

brainly.com/question/15415793

#SPJ11

A quadratic function for the area of the figure is, A = x²/2

And, the area for the given value of x is,

A = 9.245

We have to given that;

Triangle is shown in figure.

And, The value of x is, x = 4.3

Now, We know that;

Area of triangle = 1/2 x Base x Height

Hence, We get;

A = 1/2 × x × x

A = x²/2

Plug x = 4.3;

Hence, The value of area of triangle is,

A = (4.3)² / 2

A = 18.49 / 2

A = 9.245

Therefore, A quadratic function for the area of the figure is, A = x²/2

And, the area for the given value of x is,

A = 9.245

Learn more about the triangle visit;

brainly.com/question/1058720

#SPJ1

To transform each old salary x into a new salary n(x) with an across-the-board raise of r, we can use the following function: n(x) = x + r

In this case, since each teacher at C.F. Gauss Elementary School is given an across-the-board raise of r, we can use this function to calculate their new salaries. For example, if a teacher's old salary is x, their new salary would be:

n(x) = x + r

So if the across-the-board raise is 10%, or r = 0.1, then a teacher with an old salary of $50,000 would have a new salary of:

n($50,000) = $50,000 + 0.1($50,000) = $55,000

Similarly, a teacher with an old salary of $70,000 would have a new salary of:

n($70,000) = $70,000 + 0.1($70,000) = $77,000

And so on for each teacher at C.F. Gauss Elementary School.

Learn More About Function: https://brainly.com/question/2328150

#SPJ11

Answer:

13.8 ft

Step-by-step explanation:

please look on the attached I put the answer.

The probability of being in state 3 at time n+3, given that the chain is currently in state 1 at time n, is 1/80.

a. To find the probability that the chain will be in state 2 at time n+2, given that it is currently in state 3 at time n, we need to look at the (3, 2) entry of the matrix P^2, which represents the probability of transitioning from state 3 to state 2 in two steps:

P^2 = P * P = [[1/4, 1/4, 0, 1/20], [1, 0, 0, 0], [1/2, 0, 1/2, 0], [1/4, 1/4, 1/4, 1/4]] * [[1/4, 1/4, 0, 1/20], [1, 0, 0, 0], [1/2, 0, 1/2, 0], [1/4, 1/4, 1/4, 1/4]]

P^2 = [[9/80, 7/80, 1/20, 3/40], [1/4, 1/4, 0, 1/4], [7/20, 1/20, 1/4, 1/10], [1/4, 1/4, 1/4, 1/4]]

So the probability of transitioning from state 3 to state 2 in two steps is 1/20. Therefore, the probability of being in state 2 at time n+2, given that the chain is currently in state 3 at time n, is 1/20.

b. To find the probability that the chain will be in state 3 at time n+3, given that it is currently in state 1 at time n, we need to look at the (1, 3) entry of the matrix P^3, which represents the probability of transitioning from state 1 to state 3 in three steps:

P^3 = P * P^2 = [[1/4, 1/4, 0, 1/20], [1, 0, 0, 0], [1/2, 0, 1/2, 0], [1/4, 1/4, 1/4, 1/4]] * [[9/80, 7/80, 1/20, 3/40], [1/4, 1/4, 0, 1/4], [7/20, 1/20, 1/4, 1/10], [1/4, 1/4, 1/4, 1/4]]

P^3 = [[29/320, 9/160, 1/80, 19/320], [5/16, 1/16, 1/16, 5/16], [41/160, 1/40, 19/80, 3/16], [29/160, 9/80, 9/80, 23/80]]

So the probability of transitioning from state 1 to state 3 in three steps is 1/80. Therefore, the probability of being in state 3 at time n+3, given that the chain is currently in state 1 at time n, is 1/80.

To learn more about probability visit:

https://brainly.com/question/30034780

#SPJ11

the determinant of the matrix 0 k 1 k 6 k 1 k 0 is [tex]-2k^2 - 6[/tex].

To find the determinant of the given matrix, we can use the formula for a 3x3 matrix. The formula is as follows:

det(A) = a11(a22a33 - a23a32) - a12(a21a33 - a23a31) + a13(a21a32 - a22a31)

Here, a11, a12, a13, a21, a22, a23, a31, a32, and a33 are the elements of the matrix A. In our case, we have:

a11 = 0, a12 = k, a13 = 1
a21 = k, a22 = 6, a23 = k
a31 = 1, a32 = k, a33 = 0

Substituting these values in the formula, we get:

det(A) = 0(6*0 - k*k) - k(k*0 - k*1) + 1(k*k - 6*1)
det(A) = -k^2 - k^2 + k^2 - 6
det(A) = -2k^2 - 6

Therefore, the determinant of the matrix is -2k^2 - 6.

In general, the determinant of a matrix is a scalar value that provides important information about the properties of the matrix. Specifically, the determinant tells us whether the matrix is invertible or singular (i.e., whether it has a unique solution or not). If the determinant is non-zero, the matrix is invertible and has a unique solution. If the determinant is zero, the matrix is singular and does not have a unique solution. In the case of our matrix, we can see that the determinant depends on the value of k. If k is such that -2k^2 - 6 is non-zero, then the matrix is invertible and has a unique solution. If k is such that -2k^2 - 6 is zero, then the matrix is singular and does not have a unique solution.

To know more about determinant of the matrix refer here:

https://brainly.com/question/4470545

#SPJ11

Answer:

Angle 5 and 2 are vertical to each other.

Hope this helps : )

Step-by-step explanation:

Vertical angles are when angles are opposite of each other. So that makes angles 5 and 2 Vertical Angles.

The general solution to the given system of differential equations is [tex](x(t), y(t)) = (C - 9, -5 + 5Ce^{5t})[/tex], where C is an arbitrary constant.

To find the general solution of the given system of differential equations:

dx/dt = 9x - y

dy/dt = 5x + 5y

Solve these equations simultaneously.

Step 1: Solve the first equation, dx/dt = 9x - y.

To do this,  rearrange the equation as follows:

dx/dt + y = 9x

This is a first-order linear ordinary differential equation. Solve it using an integrating factor. The integrating factor is given by [tex]e^{\int1 \,dt}= e^t[/tex].

Multiply both sides of the equation by [tex]e^t[/tex]:

[tex]e^{t}dx/dt + e^t y = 9x e^t[/tex]

Now, notice that the left side is the derivative of the product [tex]e^t[/tex] x with respect to t:

d/dt [tex](e^t x)[/tex] = 9x [tex]e^t[/tex]

Integrating both sides with respect to t:

[tex]\int{d/dt (e^t x)}\, dt = \int{9x e^t}\, dt[/tex]

[tex]e^t x = 9 \int{x e^t}\, dt[/tex]

integrating by parts.

[tex]e^t x = 9 (x e^t - \int{ e^t}\, dx[/tex]

[tex]e^t x = 9x e^t - 9 \int{e^t}\, dx[/tex]

[tex]e^t x + 9 \int{ e^t}\, dx = 9x e^t[/tex]

[tex]e^t x + 9 e^t = C e^t[/tex]  (where C is the constant of integration)

[tex]x + 9 = C[/tex]

[tex]x = C - 9[/tex]

Step 2: Solve the second equation,[tex]dy/dt = 5x + 5y[/tex].

This equation is separable. Rearrange it as:

[tex]dy/dt - 5y = 5x[/tex]

Multiply both sides by [tex]e^{(-5t)}[/tex]:[tex]e^{-5t} dy/dt - 5e^{-5t} y = 5x e^{-5t}[/tex]

Again, notice that the left side is the derivative of the product [tex]e^{(-5t)}y[/tex] with respect to t:

[tex]d/dt (e^{(-5t)} y)= 5x e^{-5t}[/tex]

Integrating both sides with respect to t:

[tex]\int{ d/dt (e^{(-5t)} y) dt = ∫ 5x e^{(-5t)} dt[/tex]

[tex]e^{(-5t)} y = 5 \intx e^{(-5t)} \,dt[/tex]

Adding zero for symmetry

[tex]e^{-5t} y = 5 (\int x e^{-5t} \,dt + \int 0\, dt)[/tex]

[tex]e^{-5t} y = 5 (\int x e^{-5t}\, dt + C)[/tex]

[tex]e^{-5t} y = 5 (\int x e^{-5t}\, dt) + 5C[/tex]

Using substitution: u = -5t, du = -5dt

[tex]e^{-5t} y = 5 (-\int e^{-5t} \,dx) + 5C[/tex]

[tex]e^{-5t} y = -5 \int e^u \,dx + 5C[/tex]

[tex]e^{-5t} y = -5e^u + 5C[/tex]

[tex]e^{-5t} y = -5e^{-5t} + 5C[/tex]

[tex]y = -5 + 5Ce^{5t}[/tex]

Combining the results from Step 1 and Step 2, we have:

[tex]x(t) = C - 9[/tex]

[tex]y(t) = -5 + 5Ce^{5t}[/tex]

Therefore, the general solution to the given system of differential equations is [tex](x(t), y(t)) = (C - 9, -5 + 5Ce^{5t})[/tex], where C is an arbitrary constant.

Learn more about systems of differential equations and their solutions here:

https://brainly.com/question/31963778

#SPJ12

Answer: Jerod took at least $18.50 to the mall to ensure that he had at least $10.00 left after buying a snack.

Step-by-step explanation:

Let's use "x" to represent the amount of money Jerod took to the mall.

After he spends $8.50 on a snack, he will have x - 8.50 dollars left.

Since he wants to keep a minimum of $10.00 in his pocket at all times, we can set up an inequality:

[tex]\sf:\implies x - 8.50 \geqslant 10.00[/tex]

To solve for x, we can add 8.50 to both sides of the inequality:

[tex]\sf:\implies x \geqslant 18.50[/tex]

Therefore, Jerod took at least $18.50 to the mall to ensure that he had at least $10.00 left after buying a snack.

Greetings! ZenZebra at your service, hope it helps! <33

If a and b are n × n, b is invertible, and ab is invertible, then a is also invertible.

To show that a is invertible, we need to find an inverse matrix [tex]A^-^1[/tex]such that A[tex]A^-^1 = A^-^1A[/tex] = I (the identity matrix).

Let's begin by using the hint provided and letting c = ab. We know that b is invertible, so we can multiply both sides of c = ab by b^-1 (the inverse of b) to get:

[tex]c(b^-^1) = ab(b^-^1)c(b^-^1) = a(bb^-^1)c(b^-^1) = aIc(b^-^1) = a[/tex]

Now we substitute c = ab back into the equation to get:

[tex]ab(b^-^1) = a[/tex]

Next, we can use the fact that ab is invertible to say that there exists some inverse matrix[tex](ab)^-^1[/tex] such that [tex](ab)(ab)^-^1 = (ab)^-^1(ab)[/tex] = I. Multiplying both sides of this equation by [tex]b^-^1[/tex], we get:

[tex]a(bb^-^1)(ab)^-^1 = (ab)^-^1(bb^-^1)a^-^1[/tex]
[tex]aI(ab)^-^1 = (ab)^-^1I[/tex]
[tex]a(ab)^-^1 = (ab)^-^1[/tex]

So we have shown that a multiplied by the inverse of ab is equal to the inverse of ab. This means that a must also be invertible, since the inverse of ab exists and we can simply multiply it by a to get the inverse of a. Therefore, we have proven that if a and b are n × n, b is invertible, and ab is invertible, then a is also invertible.

Learn more about invertible

brainly.com/question/30453255

#SPJ11

The sample autocorrelation function is ρ(k) = (1/n) ∑(t=k+1)ⁿ 3(t - 1) (3t-k)

To compute the sample autocorrelation function for our time series, we can use the following formula:

ρ(k) = (1/n) ∑(t=k+1)ⁿ (3t - 3) (3t-k - 3)

where ρ(k) represents the autocorrelation at lag k, n represents the number of observations (which in our case is 100), 3 represents the sample mean of the time series, and the summation is taken over all t=k+1 to n.

Then the function is written as,

=> ρ(k) = (1/n) ∑(t=k+1)ⁿ 3(t - 1) (3t-k)

Once we have computed the sample autocorrelation function, we can plot it to visualize the pattern of correlation between the time series and its lagged values.

The plot will have lag on the x-axis and autocorrelation on the y-axis. The plot will help us identify any significant correlations that exist between the time series and its lagged values.

To know more about function here

https://brainly.com/question/28193995

#SPJ4

The closest number in the sequence to 300 is 310

Sequence is an ordered list of things or other mathematical objects that follow a particular pattern or rule.

How to determine this

When the first term = 30

The common difference = 40

Following the order to get the number closest to 300

When 150 is added to 40 i.e 150 +40 = 190

190 + 40 = 230

230 + 40 = 270

270 + 40 = 310

Therefore, the number closest to 300 is 310

Read more about Sequence

https://brainly.com/question/26755466

#SPJ1

The amount of charge passing through a cross section of the wire between t = 0.00 s and 8 s is (2.45)² A (4.8 A/s)(32).

To find the amount of charge passing through a cross section of the wire between t = 0.00 s and 8 s, we can integrate the time-dependent current i(t) = (2.45)² A (4.8 A/s)t with respect to time. Here are the steps:

1. Write down the given current equation: i(t) = (2.45)² A (4.8 A/s)t.
2. Integrate i(t) with respect to time (t) over the interval [0, 8]: ∫(2.45)² A (4.8 A/s)t dt from 0 to 8.
3. Find the antiderivative of the integrand: (2.45)² A (4.8 A/s)(t²/2).
4. Evaluate the antiderivative at the bounds: [(2.45)² A (4.8 A/s)(8²/2)] - [(2.45)² A (4.8 A/s)(0²/2)].
5. Simplify the expression: (2.45)² A (4.8 A/s)(64/2).
6. Calculate the charge: (2.45)² A (4.8 A/s)(32).

The amount of charge passing through a cross section of the wire between t = 0.00 s and 8 s is (2.45)² A (4.8 A/s)(32).

Learn more about electrical circuits and current

brainly.com/question/1922668

#SPJ11

Rounded to the nearest cent, the monthly charge for 4000 kWh is $450.82.

We have the following piecewise function for the monthly charge based on the usage (x) in kilowatt hours (kWh):

For 0 ≤ x ≤ 500: C(x) = 7.52 + 0.1079x
For x > 500: C(x) = 19.22 + 0.1079x

Now, let's find the monthly charges for the given usages:

(a) 5 kWh
Since 0 ≤ 5 ≤ 500, we'll use the first equation:
C(5) = 7.52 + 0.1079(5)
C(5) = 7.52 + 0.5395
C(5) = 8.0595
Rounded to the nearest cent, the monthly charge for 5 kWh is $8.06.

(b) 13 kWh
Since 0 ≤ 13 ≤ 500, we'll use the first equation:
C(13) = 7.52 + 0.1079(13)
C(13) = 7.52 + 1.4027
C(13) = 8.9227
Rounded to the nearest cent, the monthly charge for 13 kWh is $8.92.

(c) 4000 kWh
Since 4000 > 500, we'll use the second equation:
C(4000) = 19.22 + 0.1079(4000)
C(4000) = 19.22 + 431.6
C(4000) = 450.82

Rounded to the nearest cent, the monthly charge for 4000 kWh is $450.82.

To know more about kilowatt hours (kWh), refer here:

https://brainly.com/question/30498337

#SPJ11

The Volume of composed figure = 171 cubic unit

The Volume of composed figure = 228 cubic unit

1. Volume of horizontal cuboid

= l w h

= 13  x 3 x 3

= 117 cubic unit

Volume of two vertical cuboid

= 2 ( l w h)

= 2 (6 x 3 x 1.5)

= 54 cubic unit

So, the Volume of composed figure

= 117 + 54

= 171 cubic unit

2. Volume of Big cuboid

= l w h

= 10 x 7 x 3

= 210 cubic unit

and, Volume of Small Cube

= l w h

= 3 x 2 x 3

= 18 cubic unit

So, the Volume of composed figure

= 210 + 18

= 228 cubic unit

Learn more about Volume here:

https://brainly.com/question/1578538

#SPJ1

In the given diagram, given the area of the compound shape, the value of x is 1.5 mm

From the question, we area to determine the value of x, given the area of the compound shape

From the given information,

The area of the compound shape = 24 mm²

From the given diagram, we can write that

Area of the compound shape = (7 × x) + [x × (2x + 6)]

Thus,

24 = (7 × x) + [x × (2x + 6)]

24 = 7x + (2x² + 6x)

24 = 7x + 2x² + 6x

24 = 2x² + 13x

2x² + 13x - 24 = 0

2x² + 16x - 3x - 24 =0

2x(x + 8) - 3(x + 8) = 0

(2x - 3)(x + 8) = 0

2x - 3 = 0 OR x + 8 = 0

2x = 3 OR x = -8

x = 3/2 OR x = -8

Since, measurement cannot be negative

x = 3/2 mm

x = 1.5 mm

Hence, the value of x is 1.5 mm

Learn more on Calculating the value of x here: https://brainly.com/question/10254615

#SPJ1

The area of a triangle with vertices (6, 6), (2, 4), and (0, 8) is 4√10 square units.

To find the area of a triangle with vertices (6, 6), (2, 4), and (0, 8), we can use the formula:

Area = 1/2 * base * height

First, we need to find the base and height of the triangle. We can use the distance formula to do this:

Base = distance between (6, 6) and (2, 4) = √[(6-2)^2 + (6-4)^2] = √20
Height = distance between (0, 8) and the line containing (6, 6) and (2, 4). To do this, we first find the equation of the line:

y - 6 = (6-4)/(6-2) * (x-6)
y - 6 = 1/2 * (x-6)
y = 1/2x + 3

Then we find the distance between point (0, 8) and the line y = 1/2x + 3:

Height = |1/2*0 - 1*8 + 3| / √(1^2 + 1/2^2) = 4√5/5

Now we can plug in the base and height into the formula:

Area = 1/2 * √20 * 4√5/5 = 4√10 square units

Therefore, the area of the triangle is 4√10 square units.

Know more about triangle here:

https://brainly.com/question/17335144

#SPJ11

The utility function of the company is U(pA,pB) = 200pA(-2pA+2pB) + 100pB(36+4pA-8pB) - 2qA - 3qB, where qA and qB are the quantities of chocolates A and B produced and sold, respectively.

To maximize the utility, we take the partial derivatives of U with respect to pA and pB and set them equal to zero. Solving the resulting system of equations, we get pA = 4.2 and pB = 2.4. Substituting these values into the utility function, we get a maximum utility of 4800.

This means that the company should sell chocolate A for 4.2 soles per tablet and chocolate B for 2.4 soles per tablet to maximize its profits. At these prices, the company will produce and sell 1200 tablets of chocolate A and 600 tablets of chocolate B per week, resulting in a total revenue of 8400 soles and a total cost of 3600 soles, yielding a profit of 4800 soles.

Learn more about utility function

https://brainly.com/question/14929272

#SPJ4

Complete Question:

A company produces two types of hot chocolate, A and B, for which the production costs are, respectively, 2 soles and 3 soles per tablet. It is known that the amount that can be sold each week of type A chocolates is given by the function: q=200(-2pA+2pB), where pA and pB are the selling price of the product (in soles per tablet). And for type B chocolate is given by the function: q=100(36+4pA-8pB), where pA and pB are the selling price of the product (in soles per tablet). (2 points) Find the company's profit function. (3.5 points) Determine the selling prices that maximize the company's profit and the maximum profit. (Interpret the answer).

Based on the provided tables, the correct answer is c. Guitarists were significantly less anxious than pianists and drummers, and drummers were significantly less anxious than pianists.

To reach this conclusion, follow these steps:
1. Look at the "Estimates" table, which provides the mean anxiety levels and 95% confidence intervals for each instrument group.
- Guitar: Mean anxiety = 72.633
- Piano: Mean anxiety = 85.852
- Drums: Mean anxiety = 98.225
2. Examine the "Pairwise Comparisons" table, which presents the mean differences in anxiety levels between the instrument groups and the significance levels (Sig.) after applying the Bonferroni correction for multiple comparisons.
- Guitar vs Piano: Mean difference = -13.219, Sig. = .008 (significant)
- Guitar vs Drums: Mean difference = -25.592, Sig. = .000 (significant)
- Piano vs Drums: Mean difference = -12.373, Sig. = .009 (significant)
3. Since all three pairwise comparisons are significant at the .05 level, it means that the anxiety levels among the groups are significantly different. Thus, guitarists have lower anxiety than pianists and drummers, and drummers have lower anxiety than pianists.

The tables show that there is a significant difference in anxiety levels among the different instruments. Drummers had the highest anxiety levels, followed by pianists, and guitarists had the lowest anxiety levels. The pairwise comparisons also show that the anxiety levels of guitarists were significantly lower than both drummers and pianists. Therefore, the answer is option b: Guitarists were significantly less anxious than drummers but were about as anxious as pianists, and drummers were about as anxious as pianists. The tables also provide information on the interval and difference in anxiety levels among the instruments.

Learn more about Mean difference here: brainly.com/question/15786413

#SPJ11

The value of "k" for which the determinant of the given matrix is zero is 2.5

The given problem asks to find the values of "k" for which the determinant of the given matrix is zero.

The given matrix can be represented as:

| 6 0 0 |
| 7 2 0 |
| 0 2 k+7 |

The determinant of the matrix is calculated as:

6 * (2(k+7)) - 0 - 0 - 7 * (2) * 0 + 0 - 0 = 12k - 30

To find the values of "k" for which the determinant is zero, we need to solve the equation:

12k - 30 = 0

Simplifying the equation, we get:

k = 2.5

Therefore, the value of "k" for which the determinant is zero is 2.5.

In general, the determinant of a matrix is a scalar value that represents some important properties of the matrix, such as invertibility and eigenvalues. If the determinant of a matrix is zero, it means that the matrix is singular and does not have an inverse. In the given problem, we have calculated the determinant of the matrix and found the values of "k" for which the determinant is zero. This helps us understand the properties of the matrix and the possible solutions to any equations involving the matrix.

To learn more about determinants of matrices, visit:
https://brainly.com/question/22209293

#SPJ11

Answer:

Finding x

8x+5 = 10x

8x-10x=-5

-2/-2= -5/-2

x= 5/2

Length

8x+5

8(5/2)+5

40/2+5/1

20+5

L=25

Width

10x

10(5/2)

50/2

W=25

Perimeter= (length+width)×2

2(l)+2(w)

2(25)+2(25)

50+50

P=100

Step-by-step explanation:

Rectangles do have two equal lengths and two equal widths but the value of x when I plug it in does give the same value which is supposed to be square due to the square having 4 equal sides

I don't agree , as represents a value of 2.

Algebra is a branch of mathematics that deals with mathematical operations and symbols to represent numbers and quantities. It is a broad area that covers a wide range of mathematical topics, including solving equations, manipulating mathematical expressions, and analyzing mathematical structures.

In algebra, the basic mathematical operations include addition, subtraction, multiplication, and division, which are used to perform computations on numerical values. Algebraic expressions often use variables such as x and y to represent unknown quantities, and equations are used to describe relationships between these variables.

Algebraic structures such as groups, rings, and fields are studied in abstract algebra, which is a more advanced area of algebra. These structures have applications in many areas of mathematics, as well as in computer science, physics, and engineering.

As we can see ,

3x  is equal to 6 × 1,

3x = 6

x=2≠3

We know that x represent  a value 2 not 3.

To know more about expressions visit:

https://brainly.com/question/29149747

#SPJ1

The complete question is:

Using MUS for auditing the inventory account of Cusick Machine Tool Company, the required sample size is 156 and the sampling interval is $57,692. The auditor can use this information to select the sample and test the account accurately.

In this scenario, Jim Sigmund, a senior in charge of the audit, plans to use MUS (Monetary Unit Sampling) to audit Cusick Machine Tool Company's inventory account. The MUS is a statistical sampling method that uses monetary units as a basis for selecting a sample.

The sample size is determined by considering the tolerable misstatement, expected misstatement, and the risk of incorrect acceptance. To determine the required MUS sample size and sampling interval, we need to use Table 8-5. The tolerable misstatement is the maximum amount of error that the auditor is willing to accept without modifying the opinion.

In this case, it is $360,000. The expected misstatement is the auditor's estimate of the amount of misstatement in the account. Here, it is $90,000. The risk of incorrect acceptance is the auditor's assessment of the risk that the sample will not identify a misstatement that exceeds the tolerable misstatement. It is 5%.

Using Table 8-5, we can find the sample size and sampling interval based on these factors. The sample size is 156, and the sampling interval is $57,692. This means that every $57,692 in the inventory account is a sampling interval, and the auditor needs to select 156 monetary units for testing.

The calculation for the sampling interval is determined by dividing the recorded balance of the account by the sample size. In this case, the recorded balance is $9,000,000, and the sample size is 156. Thus, the sampling interval is $57,692 ($9,000,000 / 156).

In conclusion, using MUS for auditing the inventory account of Cusick Machine Tool Company, the required sample size is 156 and the sampling interval is $57,692. The auditor can use this information to select the sample and test the account accurately.

To know more about sample size refer here:

https://brainly.com/question/30885988#

#SPJ11

Complete Question:

McMullen and Mulligan, CPAs, were conducting the audit of Cusick Machine Tool Company for the year ended December 31. Jim Sigmund, senior-in-charge of the audit, plans to use MUS to audit Cusick's inventory account. The balance at December 31 was $9,000,000.

Based on the following information, compute the required MUS sample size and sampling interval using Table 8-5: (Use the tables, Enot IDEA, to solve for these problems. Round your interval answer to the nearest whole number.)

Tolerable misstatement = $360,000

Expected misstatement = $90,000

Risk of incorrect acceptance = 5%

Table 8-5:

Sample Size- 156

Sampling Interval - $57,692

The volume of the cuboid to be approximately 1.8cm³.

In this case, we are given that the volume of the small cube is 1cm³. Therefore, using the formula, we can solve for the length of its side as follows:

1cm³ = s³

Taking the cube root of both sides: ∛(1cm³) = ∛(s³) 1cm = s

Hence, the length of the side of the small cube is 1cm.

Then, we can estimate the other two dimensions of the cuboid as follows:

   • The width (w) could be a little more than the length of the side of the small cube, say 1.2a.

   • The height (h) could also be a little more than the length of the side of the small cube, say 1.5a.

Therefore, using the formula for the volume of a cuboid, we can estimate the volume of the cuboid as follows:

V = lwh V = a × 1.2a × 1.5a V = 1.8a³

Substituting the value of 'a' as 1cm, we get:

V ≈ 1.8cm³

To know more about volume here

https://brainly.com/question/11168779

#SPJ1