Answer:
penis
Explanation:
An ideal gas is confined within a closed cylinder at atmospheric pressure (1.013 * 105 Pa) by a piston. The piston moves until the volume of the gas is reduced to one-ninth of the initial volume. What is the final pressure of the gas when its temperature returns to its initial value?
Answer:
[tex]911700\ \text{Pa}[/tex]
Explanation:
[tex]P_1[/tex] = Initial pressure = [tex]1.013\times 10^5\ \text{Pa}[/tex]
[tex]V_1[/tex] = Initial volume
[tex]V_2[/tex]= Final volume = [tex]\dfrac{V_1}{9}\\\Rightarrow \dfrac{V_1}{V_2}=9[/tex]
Temperature is the same in the initial and final state
From the ideal gas law we have
[tex]P_1V_1=P_2V_2\\\Rightarrow P_2=\dfrac{P_1V_1}{V_2}\\\Rightarrow P_2=P_1\times9\\\Rightarrow P_2=1.013\times 10^5\times 9\\\Rightarrow P_2=911700\ \text{Pa}[/tex]
The final pressure of the system is [tex]911700\ \text{Pa}[/tex].
which statement is not correct for lamps connected in parallel
Answer:
This question is not complete but the completed question is below
Which statement is not correct for lamps connected in parallel?
A They can be switched on and off separately.
B They will remain bright if another lamp is connected in parallel.
C They share the supply voltage equally between them.
D They still operate if one lamp is removed.
The correct option is A
Explanation:
Lamps connected in series have the same voltage running across each lamp in the connection and will thus have the same brightness if any lamp is added or removed. This property also means they can only be switched on and off by a single switch, hence option A is not correct about lamps connected in parallel.
Lamps connected in a parallel circuit will have the same voltage and different current.
A parallel circuit contains resistors arranged parallel to each other. some basic characteristics of parallel circuit include the following;
the voltage in all the resistors is the samethe current flowing in each resistor is differentV = I₁R₁ + I₂R₂ + I₃R₃ + ---
where;
V is the voltage in the circuitI is the different currentsR is the different resistorsThus, we can that lamps connected in a parallel circuit will have the same voltage and different current.
Learn more about parallel circuit here: https://brainly.com/question/12739827
Power is the rate at which work is done true or false
Answer:
false
Explanation:
A measuring tape unwinding from a drum of radius r.The center of the drum is not moving; the tape unwinds as its free endis pulled away from the drum. Neglect the thickness of the tape, sothat the radius of the drum can be assumed not to change as the tapeunwinds. In this case, the standard conventions for the angularvelocity omega and for the (translational) velocity v of the end of the tape result in a constraint equation with a positive sign (e.g., if v>0, that is, the tape is unwinding, then \omega > 0 also).Assume that the function x(t) represents the length of tape that has unwound as a function of time. Find θ(t), the angle through which the drum will have rotated, as a function of time. Express your answer (in radians) in terms of x(t) and any other given quantities.Express your answer (in radians) in terms of x(t) and any other given quantities.θ(t)=x(t)/r
Answer:
θ = x / r
Explanation:
This is an exercise that relates the angular and linear quantities, in the statement they indicate the relationship of the speeds
v = w r
Linear and rotational speeds are defined
v = x / t
w =θ / t
let's substitute in the first equation
x / t = (θ / t) r
x = θ r
θ = x / r
It is important to note that the angles must be measured in radians
What is Solar Energy used for? Use in your own words.
Answer:
TO POWER ELECTRIC GADGETS AND SAVE EARTH FROM POLLUTION
Explanation:
Comets travel around the sun in elliptical orbits with large eccentricities. If a comet has speed 2.0×10^4m/s when at a distance of 2.5×10^11m from the center of the sun, what is its speed when at a distance of 5.0×10^10?
hi ilove you jk it stoo stsfad
(A star if you answer this question) A school bus is traveling at 11.1 m/s and has a
momentum of 152,625 kgm/s. What is the mass of the bus?
[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the Concept of the Kinematics in real world.
So, as given here, we have to find the Mass of the bus from the given momentum, so we get as,
P = m * V
momentum = mass * velocity
here, P= 152625 kgm/s and v= 11.1 m/s
so substituting we get as,
m = 152625 ÷ 11.1 => 13,750 kg
hence,the mass of the bus is 13,750 kg.
If a runner travels 60 m in 12 s, his acceleration is *
Will be marked as brainiest!
Answer:
[tex]a=0.834\ m/s^2[/tex]
Explanation:
Given that,
Displacement, d = 60 m
Time, t = 12 s
We need to find the acceleration of the runner. Using second equation of motion as follows :
[tex]d=ut+\dfrac{1}{2}at^2[/tex]
Here, u = 0 (initial velocity = 0)
a is acceleration
[tex]a=\dfrac{2d}{t^2}\\\\a=\dfrac{2\times 60}{(12)^2}\\\\a=0.834\ m/s^2[/tex]
So, the acceleration of the runner is [tex]0.834\ m/s^2[/tex].
A bus is moving with
a velocity of lom/s. After 2 sec its velocity
becames 20/s find the distance from travelled
by a bus at that this time of interval
Answer:
30 m
__________________________________________________________
Explanation:
We are given:
Initial velocity (u) = 10 m/s
Final velocity (v) = 20 m/s
Time interval (t) = 2 seconds
Distance travelled by the bus (s) = s meters
Solving for the distance travelled:
Solving for the acceleration:
v = u + at [first equation of motion]
20 = 10 + a(2) [replacing the given values]
2a = 10 [subtracting 10 from both sides]
a = 5 m/s² [dividing both sides by 2]
Solving for the distance:
s = ut + 1/2 (at²) [second equation of motion]
s = 10(2) + 1/2(5)(2)² [replacing the given values]
s = 20 + 10
s = 30 m
Therefore, the bus travelled 30 m in the given time interval
Calculate the total number of Cl atoms in 150mL of liquid Ccl4 (d=1.589g/mL)
Answer:
The total number of Cl atoms in 150mL of liquid CCl4 is 3.73*10²⁴.
Explanation:
First you must determine the mass of CCL4 present in 150mL of CCl4. Density is a quantity that allows us to measure the amount of mass in a certain volume of a substance, whose expression for its calculation is the quotient between the mass of a body and the volume it occupies:
[tex]density=\frac{mass}{volume}[/tex]
In this case, the density value of d = 1.589 g/mL. Then, being the volume equal to 150 mL, the value of the mass can be calculated as:
mass= density*volume
mass=1.589 g/mL * 150 mL
mass= 238.35 g
Now, being the molar mass of CCl4 154 g/mol, the number of moles that 238.35 g represents is calculated as:
[tex]moles=\frac{238.35 g}{154 \frac{g}{mol} }[/tex]
moles= 1.55
1 mole of the compound CCl4 contains 4 moles of Cl. Then, using a simple rule of three, it is possible to calculate the number of moles of Cl that 1.55 moles of CCl4 contain:
[tex]moles of Cl=\frac{1.55 moles of CCl_{4} *4 moles of Cl}{1 mole of CCl_{4} }[/tex]
moles of Cl= 6.2
Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023*10²³ particles per mole. Avogadro's number applies to any substance. In this case it can be applied as follows: if 1 mole of Cl contains 6.023*10²³ atoms, 6.2 moles of Cl how many atoms does it contain?
[tex]atoms of Cl=\frac{6.2 moles*6.023*10^{23} atoms}{1 mole}[/tex]
atoms of Cl= 3.73*10²⁴
The total number of Cl atoms in 150mL of liquid CCl4 is 3.73*10²⁴.
why does the current splits in parallel circuit and why does the voltage remains equal?
Voltage:
It is basically the difference between the charges of the materials on the ends of the Wire
also known as potential difference
It is very similar to the movement of air, it moves from higher density to lower density. in this case, the change in density is the potential difference
So, since voltage is the difference between the charge available on the ends of a wire. Even if the wire splits in parallel circuit, the difference of the charges remains the same
the more the potential difference, the faster electrons will move to the material with lower charge
Current:
Current is the amount of electrons moving through a cross-section of a wire in a period of time
So basically, it is the amount of electrons that move across a given point on a wire in a period of time
If the wire splits, we will have the same amount of electrons moving through as they would if the wire was not split but now, the electrons passing are divided and hence, if we measure the current after the split, we will find that we have a lower current
that's because we have less charge moving through the cross-section of the wire since some of those electrons are moving through a different wire
That's why the current splits in a parallel circuit
A 20.0 kg box slides up a 12.0 m long incline at an angle of 30.0 degrees with the
horizontal. A force of 150 N is applied to the box to pull it up the incline. The applied
force makes an angle of 10.0 degrees to the incline. The increase in the kinetic energy
of the box is:
Answer:
jus multiply by 69
Explanation:
BRAINLIEST
Which statement is an assumption that is made about science?
Science is absolute.
The purpose of science is to advance technology.
The universe cannot be understood with certainty.
Science is democratic.
Answer: The purpose of science is to advance technology.
Explanation: My explanation is that science advances things, Such as science made it able to have Siri sand honestly creates what we are using now to type.
The statement "the universe cannot be understood with certainty" is an assumption that is made about science option (C) is correct.
What is science?Science is a rigorous process of acquiring and analyzing information about the earth in the form of testable understandings.
It is given that:
The statements are:
Science is absolute.The purpose of science is to advance technology.The universe cannot be understood with certainty.Science is democratic.As we know; from the definition of science; the rigorous process of acquiring and analyzing information about the earth in the form of testable understandings.
The assumption made about science is the universe cannot be understood with certainty.
Thus, the statement "the universe cannot be understood with certainty" is an assumption that is made about science option (C) is correct.
Learn more about the science here:
brainly.com/question/12842883
#SPJ2
A freshly caught catfish is placed on a spring scale, and it oscillates up and down with a period of 0.19 s. If the spring constant of the scale is 2330 N/m, what is the mass of the catfish?
Answer:
The mass of the catfish is 2.13 kg
Explanation:
Period of oscillation, T = 0.19 s
spring constant, k = 2330 N/m
The period of oscillation of the spring is given by;
[tex]T = 2\pi \sqrt{\frac{m}{k} }\\\\\frac{T}{2\pi} = \sqrt{\frac{m}{k} }\\\\\frac{T^2}{4\pi^2} = \frac{m}{k}\\\\m = \frac{kT^2}{4\pi^2}[/tex]
where;
m is mass of the catfish
substitute the given values and solve for m;
[tex]m = \frac{kT^2}{4\pi^2} \\\\m = \frac{(2330)(0.19)^2}{4\pi^2} \\\\m = 2.13 \ kg[/tex]
Therefore, the mass of the catfish is 2.13 kg
A satellite in orbit around the Earth has a speed of 8 km/s at a given point of its orbit. If the period is 2 h, what is the altitude at that point?
Answer:
Explanation:
Using the formula;
Speed = Distance/Time
Given
Speed = 8km/s
Time = 2hr
Convert 2hr to secs
1hr = 3600secs
2hr = 2(3600)
2hr = 7200secs
Altitude is the distance
From the formula;
Distance = speed × time
Distance = 8×7200
Distance = 57200km
Hence the altitude at this point is 57,200km
A person stands at the deep end of a swimming pool and looks at his dive mask which is at the bottom of the pool at a depth of 3.19 m. The index of refraction for water is 1.33. At what depth does the person see his dive mask (apparent depth in meters)? Your answer should be a number with three decimal places, do not include the unit.
Answer:
2.398
Explanation:
In order to solve this problem we are required to use the following information and the question expects us to give depth at which theask is seen.
Dn = D x nobservation/n object
This is the formula for apparent depth
Depth = 3.19
The index of refraction for water is 1.33
3.19x1/1.33
= 3.19/1.33
= 2.398m
the person see his dive mask at
2.398m (apparent depth in meters
he gravitational force between two objects of masses m1m1m_1 and m2m2m_2 that are separated by distance rrr is
Answer:
[tex]F = \frac{6.67408m_1 m_2}{10^{11}r^2}[/tex]
Explanation:
Given
[tex]Object_1 = m_1[/tex]
[tex]Object_2 = m_2[/tex]
[tex]Distance = r[/tex]
Required
Determine the force of attraction
This is calculated as:
[tex]F = \frac{GMm}{d^2}[/tex]
Where
M = mass of object 1
m = mass of object 2
d = distance
Where G = gravitational constant
[tex]G = 6.67408 * 10^{-11}\ m^3 kg^{-1} s^{-2}[/tex]
Substitute these values in
[tex]F = \frac{GMm}{d^2}[/tex]
[tex]F = \frac{6.67408 * 10^{-11} * m_1 * m_2}{r^2}[/tex]
[tex]F = \frac{6.67408 * m_1 * m_2* 10^{-11}}{r^2}[/tex]
[tex]F = \frac{6.67408m_1 m_2* 10^{-11}}{r^2}[/tex]
[tex]F = \frac{6.67408m_1 m_2}{10^{11}*r^2}[/tex]
[tex]F = \frac{6.67408m_1 m_2}{10^{11}r^2}[/tex]
a scuba diver in a pool looks at his instructor. the angle between the ray in the water and the perpendicular to the water is 25. find the height of the instructors head
Answer:
y= y' 0.67
Explanation:
This is an exercise in refraction of light,
n₁ sin θ₁ = n₂ sin θ₂
where subscript 1 is used for the incident medium and subscript 2 for the refracted medium
sin θ₁ = n2 /n1 sin θ₂
the incident medium is air with refractive index n1 = 1 and the medium where the ray is refracted is water with n = 1.33
let's calculate
sin θ₁ = 1.33 / 1 sin 25
θ₁ = sin⁻¹ (0.56208)
θ₁ = 34.2º
when the ray is refracted we can assume that the adjacent leg (water surface) is the same for the two media
let's use the trigonometry relationship
tan θ₁ = x / y
tan θ₂ = x / y '
tan θ₁ = y’ tan θ₂
y = y ’ tanθ₂ / tan θ₁
to finish exercise you must know the depth of the object
y =y' tan 25/ tan 34.2
y= y' 0.67
2) What does the specific heat capacity of a material tell you about how easy it is to heat up
that material
Answer:
High specific heat -> takes more energy to raise/lower object's temperature
Low specific heat -> takes less energy to raise/lower object's temperature
Explanation:
The specific heat capacity is the amount of heat required to raise the temperature of something per unit of mass.
A high specific heat value for an object means it takes more energy to raise or lower that object's temperature. A low specific heat value for an object means it does not take very much energy to heat or cool that object.
a current of 200 mA through a conductor converts 40 joules of electrical energy into heat in 30 second
s determine the p
otential drop across the conductor
Answer:
V = 6.65 [volt]
Explanation:
First, we must calculate the power by means of the following equation, where the voltage is related to the energy produced or consumed in a given time.
[tex]P=E/t\\P = 40/30\\P = 1.33[s][/tex]
Using the power we can calculate the voltage, by means of the following equation that relates the voltage to the current.
[tex]P=V*I[/tex]
where:
V = voltage [Volts]
I = current = 200 [mA] = 0.2 [A]
[tex]V = 1.33/0.2\\V = 6.65 [volt][/tex]
The angle of incidence is the angle between the the normal of the surface. and A. point of incidence B. reflected ray C. incident ray D. refracted ray
Answer: c. incident ray
Explanation:
A block slides down an inclined plane. Which force does zero work?
a. normal force
b. friction
c. the weight
d. all of the above
e. none of the above
Answer:
e
Explanation:
cause you have any attachments are not sure if you can get it
When a block slides down an inclined plane, normal force does zero work. Hence, option (a) is correct.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. A spring balance can be used to calculate the Force. The Newton is the SI unit of force.
The component of a contact force in mechanics known as the normal force is perpendicular to the surface that an item encounters.
As normal force always acts perpendicular to the motion, this force does zero work.
But friction force the weight acts in opposite direction of the motion, this force does work against the motion.
In an inclined plane, the parallel component of weight does work along the motion.
Learn more about normal force here:
https://brainly.com/question/18799790
#SPJ2
An object has an average acceleration of +6.07 m/s2 for 0.250 s . At the end of this time the object's velocity is +9.64 m/s .
What was the object's initial velocity?
Answer:
Explanation:
From the question we are given;
Acceleration a = 6.07m/s²
Time t= 0.25s
Final velocity v = 9.64m/s
Required
Initial velocity u
Using the equation of motion
v = u+at
9.64 = u+(6.07)(0.25)
9.64 = u+1.5175
u = 9.64-1.5175
u = 8.1225m/s
Hence the object's initial velocity is 8.1225m/s
The earth's radius is 6.37×106m; it rotates once every 24 hours.What is the speed of a point on the earth's surface located at 3/4 of the length of the arc between the equator and the pole, measured from equator? (Hint: what is the radius of the circle in which the point moves?) Express your answer to two significant figures and include the appropriate units.
Answer:
v = 120 m/s
Explanation:
We are given;
earth's radius; r = 6.37 × 10^(6) m
Angular speed; ω = 2π/(24 × 3600) = 7.27 × 10^(-5) rad/s
Now, we want to find the speed of a point on the earth's surface located at 3/4 of the length of the arc between the equator and the pole, measured from equator.
The angle will be;
θ = ¾ × 90
θ = 67.5
¾ is multiplied by 90° because the angular distance from the pole is 90 degrees.
The speed of a point on the earth's surface located at 3/4 of the length of the arc between the equator and the pole, measured from equator will be:
v = r(cos θ) × ω
v = 6.37 × 10^(6) × cos 67.5 × 7.27 × 10^(-5)
v = 117.22 m/s
Approximation to 2 sig. figures gives;
v = 120 m/s
A circuit has a voltage drop of 54.0 V across a 30.0 o resistor that carries a current of 1.80 A. What is the power used by the resistor? Use P = VI.
Answer:
P = 97.2 W
Explanation:
Given that,
Voltage drop, V = 54 V
The resistance of the resistor, R = 20 Ohms
Current, I = 1.8 A
We need to find the power used by the resistor. The formula used to find the power is given by :
P = VI
Putting all the values,
P = 54 V × 1.8 A
P = 97.2 W
So, the power used by the resistor is 97.2 W.
An echo is sound that returns to you after being reflected from a distant surface (e.g., the side of a cliff). Assuming that the distances involved are the same, an echo under water and an echo in air return to you _____________________
a. at different times, the echo under water returning more slowly.
b. at different times, the echo under water returning more quickly.
c. at the same time
Answer:
The correct answer is B
An echo underwater and an echo in the air will return at different times. The echo underwater will return more quickly than the echo in the air.
Explanation:
The physics of this is simple.
Water and air are both made up of particles. The particles for water are more closely or densely arranged that those of the air molecules. Hence sound travels faster in water than in air. When measured, the speed actually differs by as much as 5 times with water being the fastest medium.
Think of it like this. Assume you have two stacks of dominoes, one closely packed than the other but exactly the same amount of dominos, you'd notice that the stack that is more tightly arranged will be the first to topple over because it takes less time for the kinetic energy from the first domino to reach the next and on and on like that until the last domino.
Cheers
Answer:
b. at different times, the echo under water returning more quickly.
I went for a walk one day. I walked north 6.0 km at 6.0 km/h and then west 10 km at 5.0 km/hr.
Determine the total distance of the entire trip
Answer:
The total distance of the entire trip is 16 Km
Explanation:
Distance and Displacement
A moving object constantly travels for some distance at certain periods of time. The total distance is the sum of each individual distance the object traveled. It can be written as:
dtotal = d1 + d2 + d3 + ... + dn
This sum is obtained independently of the direction the object moves.
The displacement only takes into consideration the initial and final positions of the path defined by the object in its moving. The displacement, unlike distance, is a vectorial magnitude and can be even zero if the object starts and ends the movement at the same point.
The described movements are 6 Km North and 10 Km West. Regardless of the speed or time taken, the total distance is:
d = 6 Km + 10 Km = 16 Km
The total distance of the entire trip is 16 Km
A large beaker of water is filled to its rim with water. A block of wood is then carefully lowered into the beaker until the block is floating. In this process, some water is pushed over the edge and collects in a tray. The weight of the water in the tray is:______
a. Greater than the weight of the block.
b. Less than the weight of the block.
c. Equal to the weight of the block.
Answer:
c. Equal to the weight of the block.
Explanation:
We know that when an object floats , the displaced water by the floating body
has weight equal to the weight of the body . In this condition the upthrust becomes equal to the weight of the body .
In the present case the beaker is full to the brim with water . Then the body was made to float into it . While attaining equilibrium in water , it displaces water whose weight must have been equal to its weight . That liquid got spilled over the edge and collected on the tray .
So water collected on the tray must be equal to the weight of the body floating.
What preparation is usually needed for a career in physical science?
Answer:
It includes the sciences of chemistry and physics. Most careers in physical science require a 4-year college degree in one of these fields. Some careers require more advanced education as well. For example, an astronaut might have a master's degree or even a doctoral degree.
Explanation:
Answer: i have never seen two pretty best friends.
Explanation:
A school bus moves down a road, dropping off students after school. The bus slows down from a speed of 15 meters per second to a full stop over a distance of 55 meters in 11 seconds. What is the average speed, in meters per second, of the school bus while the bus is slowing down? * 3.7 5.0 26 40
Given :
A school bus moves down a road, dropping off students after school.
The bus slows down from a speed of 15 meters per second to a full stop over a distance of 55 meters in 11 seconds.
To Find :
The average speed, in meters per second, of the school bus while the bus is slowing down.
Solution :
Initial velocity, u = 15 m/s.
Distance travelled, d = 55 m.
Time taken, t = 11 s.
Final velocity, v = 0 m/s.
We know, average velocity is given by :
[tex]v_{avg}=\dfrac{distance}{time}\\\\v_{avg}= \dfrac{55}{11}\ m/s\\\\v_{avg}=5 \ m/s[/tex]
Therefore, average velocity is 5 m/s.
Hence, this is the required solution.