If you are test-driving a Bugatti Veyron and you go from 0 m/s to 124 m/s in 3.7 seconds, what was your acceleration? ​

Answer:

Potential energy

Explanation:

Potential energy is stored energy and the energy of position––gravitational energy. There are several forms of potential energy. Electrical Energy is the movement of electrical charges. Everything is made of tiny particles called atoms.

- Scientific Forms of Energy_ Stored Energy, Kinetic Energy ...ei.lehigh.edu › learners › energy › readings › energy_basics

Answer:

A) Elastic Energy, Kinetic Energy, and Gravitational Potential Energy

Explanation:

Hope this helps!

Answer:

45 degrees

Explanation:

Given that the coefficient of friction, [tex]\mu=1.0[/tex]

Let the angle of the ramp be [tex]\theta[/tex].

The gravitational force acting downward [tex]=mg[/tex]

The normal reaction by the ramp on the box, [tex]N=mg\cos\theta[/tex]

So, the maximum frictional force that can act on the box, [tex]f= \mu N[/tex]

The force along with the plane in the direction of sliding, [tex]F = mg\sin\theta[/tex]

When the box begins sliding, the F must have to overcome the frictional force,f.

So, F=f

[tex]mg\sin\theta=\mu N \\\\mg\sin\theta=\mu mg\cos\theta \\\\\frac {\sin\theta}{\cos\theta}=\mu \\\\\tan\theta=\mu \\\\\theta=\tan^{-1}\mu \\\\[/tex]

Putting the value of \mu, we have

[tex]\theta=\tan^{-1}1[/tex]

[tex]\theta=45[/tex] degrees.

Hence, the angle of the ramp with respect to the ground when the box begins sliding is 45 degrees.

Explanation:

Natural selection is the process through which populations of living organisms adapt and change. Individuals in a population are naturally variable, meaning that they are all different in some ways. This variation means that some individuals have traits better suited to the environment than others

Answer:

They gon' hate me regardless, that's why I do what I do (what I do)

See me in person i'm flawless (I'm flawless girl), i might just snatch up your dude (hahahaha)

Explanation:

i just want to be....appreciated

I think A but I dont really know

Centripetal acceleration ac is the acceleration experienced while in uniform circular motion. It always points toward the center of rotation. It is perpendicular to the linear velocity (tangential speed) v and has the magnitude:

[tex]a_c = \dfrac{v^2}{R}[/tex]

Solving for v:

[tex]v = \sqrt{a_c R} = \sqrt{(250\;m/s^2)(0.50\;m)} = 5\sqrt{5}\;m/s \approx 11.18\;m/s[/tex]

The yo-yo’s tangential speed 11.18 m/sec.

The speed of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity.

Centripetal acceleration ac is the acceleration experienced while in uniform circular motion. It always points toward the center of rotation. It is perpendicular to the linear velocity (tangential speed) v and has the magnitude:

[tex]a_{c} = v^2/r[/tex]

Solving for v

[tex]v = \sqrt{a_{c}r }[/tex] = 11.18 m/sec

The yo-yo’s tangential speed 11.18 m/sec.

To learn more about speed refer to the link:

brainly.com/question/28224010

 #SPJ2

Answer:

health factors that could harm you or your offspring

Answer:

a convergent boundary^^

Explanation:

hope it helped

Answer:b

Explanation: i took the test and b was correct

Answer:

Im not a 100 percent sure but i thinks it za A

Explanation:

Answer:

At terminal velocity, the drag force = mass x g

Explanation:

Force = 80 kg x 9.8 m/s2 = 784 kgm/s2 = 784 N

Answer:

16m

Explanation:

5m pluse 5m equals 10m 3m pluse 3m equals 6m 10m pluse 6m equals 16m thats ju ansar

Answer:

225 kg.

Explanation:

Since the gravity is 2.5 times than that of the Earth, g on that planet = (10 * 2.5) m/s = 25 m/s.

Hence, the weight of the body would be (90 * 2.5) kg, aka 225 kg.

Hope this helped!

Answer:

3. When the number of turns, N is doubled, the strength of the electromagnet is also doubled

4. Doubling the voltage, doubles the strength of the electromagnet

5. The number of paper clips a 7.5 V battery would pick is approximately 28 paper clips

The number of paper clips a 7.5 V battery would pick is 59 paperclips

6. For the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick is approximately 7 paperclips

For the 50-coil electromagnet, the average number of paper clips a 1 V battery would pick is 16 paperclips

Explanation:

3. The Magnetomotive Force, MMF = The Number of Turns on the Coil, N × The Current I Flowing in the Coil, I

∴ MMF = N × I

When the number of turns, N is doubled, the magnetomotive force, MMF is also doubled, and the strength of the electromagnet is doubled

4. Given that the voltage, V applied to the coil = The current, I flowing × The resistance, R of the coil, we have

V = I × R

Therefore, for a given constant resistance in the coil, doubling the voltage, doubles the current and therefore doubles the strength of the electromagnet

5. The average slope for the 25-coil electromagnet = (23 - 12)/(6 - 3) = 3.[tex]\bar 6[/tex]

The number of paper clips a 7.5 V battery would pick = 12 + (7.5 - 3) × 11/3 = 28.5 paperclips  ≈ 28 paper clips

The average slope for the 50-coil electromagnet = (48 - 26)/(6 - 3) = 7.[tex]\bar 3[/tex]

The number of paper clips a 7.5 V battery would pick = 26 + (7.5 - 3) × 22/3 = 59 paperclips

6. The slope calculated from a start point of approximately 0.4 V, is given as follows;

The slope for the 25-coil electromagnet = (12 - 6)/(3 - 0.4) = 30/13

Therefore, for the 25-coil electromagnet,  the average number of paper clips a 1 V battery would pick = 6 + (1 - 0.4) × 30/13) = 96/13 ≈ 7 paperclips

The slope for the 50-coil electromagnet = (26 - 13)/(3 - 0.4) = 5

Therefore, for the 50-coil electromagnet,  the average number of paper clips a 1 V battery would pick = 13 + (1 - 0.4) × 5 = 16 paperclips

3. When the number of revolutions, N, is twice, the electromagnet's strength is doubled as well.

4. Doubling the voltage doubles the electromagnet's strength.

5. The number of paper clips selected by a 7.5 V battery is 59.

6. For a 50-coil electromagnet, a 1 V battery would pull up around 7 paperclips on average. The average number of paper clips picked by a 1 V battery for a 50-coil electromagnet is 16 paperclips.

The magnetic field of an electromagnet is created by an electric current. Electromagnets are caused from conducting wire wriggled into a coil.

A magnetic field is created in the hole by a current passing through the wire.

The magnetic field production is increased by;

1) increasing the number of turns

2) increase the area of the loop

3) by moving the magnet faster

Answer for the following given options as follows;

3. When the number of revolutions, N, is twice, the electromagnet's strength is doubled as well. Because the no of coils in the circuit is directly proportional to the strength of electromagnet.

4. From the ohm's law principal doubling the voltage twice the current and hence the electromagnet's strength for a given constant resistance in the coil increases.

5. For the 25-coil electromagnet, the average slope is ;

[tex]\rm m_{avg}= \frac{23-12}{6-3} \\\\ m_{avg}= 3[/tex]

The number of paper clips selected by a 7.5 V battery is;

[tex]\rm n = 12+ (7.5-+3)\times \frac{11}{3}\\\\n = 28.5[/tex]

For the 50-coil electromagnet, the average slope;

[tex]\rm (m_{avg})_{50}= \frac{48-26}{6-3} \\\\\ \rm (m_{avg})_{50}= 7[/tex]

The number of paper clips selected by a 7.5 V battery is;

[tex]\rm N = 26+(7.5-3) \times \frac{22}{3} \\\\ N= 59[/tex]

The following is the slope determined from a starting position of around 0.4 V:

For the 25-coil electromagnet, the slope is;

[tex]\rm m_{25}=\frac{12-6}{3-0.4} \\\\\ m_{25}=\frac{6}{2.6} \\\\ m_{25}=\frac{30}{13}[/tex]

As a result, the average number of paper clips a 1 V battery would choose for the 25-coil electromagnet is;

[tex]\rm N_{25}=6+ (1-0.4)\times \frac{30}{13} \\\\ N_{25}=\frac{96}{13} \\\\ N_{25}= 7 \ paperclip[/tex]

For the 50-coil electromagnet, the slope is;

(26 - 13)/(3 - 0.4) = 5.

As a result, the average number of paper clips picked by a 1 V battery is;

[tex]\rm N'_{50}= 13+ (1-0.14)\times 5 \\\\ N'_{50}=16[/tex]

Hence,the average number of paper clips picked by a 1 V battery for a 50-coil electromagnet is 16 paperclips.

To learn more about the electromagnets, refers to the link:

https://brainly.com/question/23727978

#SPJ5

Answer:

Living thing

Explanation:

Nonliving things do not move by themselves, grow, or reproduce.

Answer:

Living

Explanation:

Unless you cut the tree, making that thang dead- its living

Answer:

It takes 3 seconds to reach its high point

Explanation:

Projectile Motion

In a projectile motion (or 2D motion), the object is launched with an initial angle θ and an initial velocity vo.

The components of the velocity are

[tex]v_{ox}=v_o\cos\theta[/tex]

[tex]v_{oy}=v_o\sin\theta[/tex]

The speed in the horizontal direction at any time t is:

[tex]v_y=v_o\sin\theta-g.t[/tex]

The time taken to reach the maximum height is when vy=0, or:

[tex]\displaystyle t_m=\frac{v_o\sin\theta}{g}[/tex]

We are given the y-component of the velocity, thus:

[tex]\displaystyle t_m=\frac{30~m/s}{10~m/s^2}[/tex]

[tex]t_m=3~s[/tex]

It takes 3 seconds to reach its high point

Answer: 20

Explanation:

If Jake pushes with 20 N of force, the force that he would feel backwards away from Amir is 20N

Force simply means the strength or energy that can later the position of an object. Force can also be described as a push or pull.

It should be noted that since Jake pushes with 20 N of force, the force that he would feel backwards away from Amir will be the exact force that was used in pushing.

This will therefore be 20 Newton as well.

Read related link on:

https://brainly.com/question/18038995

Answer:

Option B

Explanation:

Displacement  = Area under the velocity-time graph

So to find the displacement of a particle from 7 to 8 seconds we take the triangle and calculate its area.

[tex]Area\ of\ a\ right\ angled\ triangle = \frac{1}{2}*(base)*(height) \\\\Area\ of\ a\ right\ angled\ triangle = \frac{1}{2}*(1)*(3) \\\\Area\ of\ a\ right\ angled\ triangle = 1.5[/tex]

So the displacement is 1.5 meters

I have an uploaded image so you can understand it better hope it helps

Answer:

[tex]a=114\ m/s^2[/tex]

Explanation:

Given that,

Mass of an object, m = 3.68 kg

It is whirled in a horizontal circle of radius 881 cm or 8.81 m

The object completes 10.8 revolutions every 18.8 s.

We need to find the centripetal acceleration of the object. It is given by the formula as follows :

[tex]a=\omega^2 r[/tex] ...(1)

Where [tex]\omega[/tex] is angular velocity

10.8 revolutions = 67.85 rad

[tex]\omega=\dfrac{67.85\ rad}{18.8\ s}\\\\=3.6\ rad/s[/tex]

Put values in equation (1)

[tex]a=3.6^2\times 8.81\\\\a=114\ m/s^2[/tex]

So, the centripetal acceleration of the object is [tex]114\ m/s^2[/tex].

Answer:

Option A. An atom of cobalt contains more neutrons than protons.

Explanation:

From the question given above, the following data were obtained:

Mass number = 59

Atomic number = 27

Next, we shall determine the number of protons in the atom. This is illustrated below:

Atomic number of an element is simply defined as the number of protons in the atom of the element. Thus,

Atomic number = proton number

Atomic number = 27

Therefore,

Proton number = 27

Next, we shall determine the neutron number. This can be obtained as follow:

Mass number = 59

Proton number = 27

Neutron number =?

Mass number = Proton + Neutron

59 = 27 + Neutron

Collect like terms

Neutron = 59 – 27

Neutron number = 32

Next, we shall determine the number of electrons. This can be obtained as follow:

Since the atom is neutral i.e it has no charge, then, the number of protons and electrons are equal. Thus,

Electron number = Proton number

Proton number = 27

Therefore,

Electron number = 27

Summary:

Mass number = 59

Atomic number = 27

Proton number = 27

Neutron number = 32

Electron number = 27

From the above, we can see that the atom of cobalt contains:

1. More neutrons than protons.

2. The same number of protons and electrons.

Therefore, option A gives the correct answer to the question.

Answer:

7.15 m

Explanation:

From the question given above, the following data were obtained:

Height (h) = 10 m

Initial velocity (u) = 5 m/s

Horizontal distance (s) =?

Next, we shall determine the time taken for the shirt to get to the ground. This can be obtained as follow:

Height (h) = 10 m

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) =?

h= ½gt²

10 = ½ × 9.8 × t²

10 = 4.9 × t²

Divide both side by 4.9

t² = 10 / 4.9

t² = 2.04

Take the square root of both side

t = √2.04

t = 1.43 s

Finally, we shall determine the horizontal distance travelled by the shirt. This can be obtained as follow:

Initial velocity (u) = 5 m/s

Time (t) = 1.43 s

Horizontal distance (s) =?

s = ut

s = 5 × 1.43

s = 7.15 m

Thus, the shirt will land at 7.15 m away from the stage. Thus, to catch the shirt, you must be at a point 7.15 m away from the stage.

Answer:

The extreme difference between the hot chimney and the cold knife makes the chimney expand and contract so quickly it cracks.

Explanation:

Hope this helped!

Answer:

When a blade of cold knife is touched to hot glass chimney there is a sudden drop of temperature on the spot where the blade touches. As a result it cracks.

Explanation:

When a blade of cold knife is touched to hot glass chimney there is a sudden drop of temperature on the spot where the blade touches. This decrease in temperature makes the glass to contract. The stress developed on the site of contraction is responsible for the cracking of the glass chimney.

Answer:

A.) Most nonmetals are gaseous, but some are liquid or solid

Explanation:

Answer:

a

Explanation:

Answer:

[tex]K_{i}+U_{g,i} = K_{f}+U_{g,f}[/tex]

Explanation:

A closed system is a system where exists energy interactions with surroundings, but not mass interactions. If we neglect any energy interactions from boundary work, heat, electricity, magnetism and nuclear phenomena and assume that process occurs at steady state and all effects from non-conservative forces can be neglected, then the equation of energy conservation is reduce to this form:

[tex]\Delta K +\Delta U_{g} = 0[/tex] (1)

Where:

[tex]\Delta K[/tex] - Change in kinetic energy of the system, measured in joules.

[tex]\Delta U_{g}[/tex] - Change in gravitational potential energy of the system, measured in joules.

If we know that [tex]\Delta K=K_{i}-K_{f}[/tex] and [tex]\Delta U_{g} = U_{g,i}-U_{g,f}[/tex], then we get the following equation:

[tex]K_{i}+U_{g,i} = K_{f}+U_{g,f}[/tex] (2)

Where [tex]i[/tex] and [tex]f[/tex] stands for initial and final states of each energy component.

Hence, the right answer is [tex]K_{i}+U_{g,i} = K_{f}+U_{g,f}[/tex]

Answer:

KEi + PEi = KEf + PEf

Explanation

right on edge 2020

Answer:

1000 seconds.

Explanation:

Answer:

100 Watts

Explanation:

These equations are needed to work out the answer:

force: 10 kg* 2m/s= 20

work done: 20* 10m=200

power: 200/2=100