If two charged balloons are 10cm apart and they feel a force of electrical repulsion of 20N, what would the force of electrical repulsion become if the balloons were moved apart to a distance of 100cm?

Answer:

I am not sure if this is the answer

(B) what is the height of the building if it hits the ground after those 5 seconds.

Answer:

Explanation:

Fruits fall down when the branch is shaken because when force is applied to shake the branch,the branch comes in motion but the fruits tend to be at rest

due to inertia of rest which results the falling of fruits.

Answer:

420J

Explanation:

Power is the time rate of change in energy. Power is the ratio of energy to time. The S.I unit of power is in watts.

Given that the flash lasts for 1/675 s, power output is 2.7 * 10⁵ W. Hence:

Power = Energy / time

Substituting:

2.7 * 10⁵ W = Energy / (1/675)

Energy = 2.7 * 10⁵ W * 1/675 = 400J

Therefore the energy emitted as light is 400J.

Since the conversion of electric energy to light is 95% efficient, hence the energy stored as electrical energy is:

Energy(capacitor) = 5% of 400J + 400J = 0.05*400 + 400

Energy(capacitor) = 420J

Answer:

the type of force is Unbalanced force;

As upward force is not equal to downward force.

Answer:

False

Explanation:

parts that are smaller than protons neutrons and electrons

20 km

Hope this helps Have a good day

Answer: 400 m

Explanation:

Vf= 20 + (4*10)

Vf= 60 [m/s]

x= (60^2 - 20^2) / (2*4)

x= 400 m

29900 J

Explanation:

Recall that

P = VI

= (230 volts)(13 A)

= 2990 watts

Also,

E = Pt

= (2990 watts)(10 s)

= 29900 J

Answer:

Explanation:

F = ma is a linear equation. This means that the Force change as the accleration changes. And vice versa. If the Force is cut in thirds, then the acceleration is also cut in thirds. Let's do some math on this just to prove it, shall we?

We know that at first, the F = 15. Let's give this object a mass of 5kg. That means that

15 = 5a so

a = 3

Then the F is cut into thirds, so

5 = 5a so

a = 1

The second acceleration is one-third of the first one, where the Force is 3 times greater.

Answer:

The fundamental units are the base units defined by International System of Units. These units are not derived from any other unit, therefore they are called fundamental units. The seven base units are: Meter (m) for Length. Second (s) for Time.

Explanation:

Answer:

10m/hr

Explanation:

10m/3600 sec= 1m/360sec

Answer:

Explanation:

[tex]a = \frac{v_f-v_0}{t}[/tex] which is the final velocity minus the initial velocity in the numerator, and the change in time in the denominator.  For us:

[tex]a=\frac{2.7-1.6}{1.2}[/tex] so

a = .92 m/s/s (NOT negative because you're speeding up)

Answer:

Living it:) thats all

The earth pulls the moon with as much force as the moon pulls the earth.

P = W / t

2000 = 30000 / t

t = 30000/2000

t = 30/2

t = 15 seconds

Explanation:

work(w)=30000J

power(p)=2000W

time taken(t)=?

now,

hope it helps.

Answer:

I believe it is D

forgive me if I'm wrong

Answer:

Linear magnification = 1/3

Explanation:

Given:

Convex mirror

Object's distance from pole = 2f

Find:

Linear magnification

Computation:

Object distance, u = −2f

So,

1/v + 1/u = 1/f

1/v + 1/(-2f) = 1/f

1/v = 1/f + 1/2f

BY taking LCM

1/v = 3 / 2f

v = 2f / 3

Magnification, M = -v / u

So,

Magnification, M = (2f / 3) / 2f

Magnification, M = 2f / 6f

Magnification, M = 2 / 6

Linear magnification = 1/3

Answer: hello the options related to your question is missing attached below are the missing options

answer : The molecules with the highest temperature will bounce off their neighbors, losing energy to them and so on until the system is at a new equilibrium with the piston moved out  ( option B )

Explanation:

What best describes the situation of what will happen next as explained in the question is in Option B

Because molecules with higher temperatures will always posses higher kinetic energy and they will collide more frequently with surrounding molecules passing on their energy in the process until the energy gets to the molecules closest to the piston. The molecules closest to the piston will then hit the piston until a new equilibrium is achieved

Answer:

8.136×10⁻⁵ J

Explanation:

Applying,

Q = Cv................ Equation 1

Where Q = Charge on the capacitor, v = voltage of the battery, C = capacitance of the capacitor.

From the question,

Given: C = 6.78μF = 6.78×10⁻⁶ F, v = 12 V

Substitute these values into equation 1

Q = (6.78×10⁻⁶ )(12)

Q = 8.136×10⁻⁵ J

Hence the charge on the capacitor is 8.136×10⁻⁵ J

Answer:

20 m/s

Explanation:

Applying,

a = (v-u)/t.................... Equation 1

Where a = acceleration of the car, v = final velocity of the car, u = initial velocity of the car, t = time.

make v the subject of the equation

v = u+at.............. Equation 2

From the question,

Given: u = 0 m/s(start from rest), a = 2 m/s², t = 10 seconds

Substitute these values into equation 2

v = 0+(2×10)

v = 20 m/s

Power of TV = 65Watt

If Efficiency = 70%, then the percentage of energy wasted is 30%

So, the amount of energy getting wasted:

= 30/100 × 65

= 1950/100

= 195/10

= 19.5 W

Answer:

17.27 Hz

Explanation:

Applying

v = λf................ Equation 1

Where v = speed of the car, λ = Distance between successive crevice, f = number of crevice moved in 1 seconds(Frequency of the vibration)

make f the subject of the equation

f = v/λ............. Equation 2

From the question,

Given: v = 38 m/s, λ = 2.2 m

Substitute these values into equation 2

f = 38/2.2

f = 17.27 Hz

Answer:

A short circuit is an abnormal connection between two nodes of an electric circuit intended to be at different voltages. This results in an electric current limited only by the Thévenin equivalent resistance of the rest of the network which can cause circuit damage, overheating, fire or explosion.

hope it helps.Please give me brainliest O:-)

Answer:

A short circuit is an electrical circuit that allows a current to travel along an unintended path with no or very low electrical impedance.

Answer:

Perform a simple test of the material in the pan to assess whether it is real gold. Raw gold appears brassy yellow and bright. If you think it is gold, place your hand between it and the sun to create shade over the gold. If it still appears bright in the pan, chances are that it is real gold.

Explanation:

Answer:

a) v₂ = 4.2 m/s

b) v₂ = 5 m/s

Explanation:

a)

We will use the law of conservation of momentum here:

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

m₁ = m₂ = mass of bowling pin = 1.8 kg

u₁ = speed of first pin before collsion = 5 m/s

u₂ = speed of second pin before collsion = 0 m/s

v₁ = speed of first pin after collsion = 0.8 m/s

v₂ = speed of second after before collsion = ?

Therefore,

[tex](1.8\ kg)(5\ m/s)+(1.8\ kg)(0\ m/s)=(1.8\ kg)(0.8\ m/s)+(1.8\ kg)(v_2)\\v_2 = 5\ m/s - 0.8\ m/s[/tex]

v₂ = 4.2 m/s

b)

We will use the law of conservation of momentum here:

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

where,

m₁ = m₂ = mass of bowling pin = 1.8 kg

u₁ = speed of first pin before collsion = 5 m/s

u₂ = speed of second pin before collsion = 0 m/s

v₁ = speed of first pin after collsion = 0 m/s

v₂ = speed of second after before collsion = ?

Therefore,

[tex](1.8\ kg)(5\ m/s)+(1.8\ kg)(0\ m/s)=(1.8\ kg)(0\ m/s)+(1.8\ kg)(v_2)[/tex]

v₂ = 5 m/s