if on an average a teflon polymer has 100,000 monomer units and each monomer of teflon has the formula c2f4, what is the molar mass of the polymer?

Answer:

Explanation:

Expert-Verified Answer. The balanced reaction that describes the reaction of chlorine gas and sodium iodide to produce elemental iodine and sodium chloride in aqueous solution is expressed Cl2+2NaI= I2 + 2NaCl.

The number of atoms contained by 6 moles of aluminium is 3.612 × 10²⁴ atoms of Al.

The number of atoms contained by a substance can be calculated by multiplying the number of moles in the substance by Avogadro's number.

Avogadro's number is the number of atoms present in 12 grams of isotopically pure carbon-12, being 6.02214076 × 10²³. By definition, it is the number of elementary entities (atoms or molecules) comprising one mole of a given substance.

According to this question, a reaction occurs between aluminum and aqueous solution of copper (I) sulfate. If there are 6 moles of aluminium, the number of atoms in this aluminium can be calculated as follows:

no of atoms = 6 × 6.02 × 10²³

no of atoms = 36.12 × 10²³

no of atoms = 3.612 × 10²⁴ atoms of Al

Therefore, 3.612 × 10²⁴ atoms of Al is the number of atoms contained in 6 moles of aluminium.

Learn more about atoms at: https://brainly.com/question/8834373

#SPJ1

Answer:

heat energy

Explanation:

I think because of the collisions of all the atoms/molecules that were accelerated because of the heat from the initial reaction and first collisions, heat is generated.

also, oxygen is added to the flame from the air as well :)

8.999×10^-2 ppmv is the concentration of ppmv of CO.

Concentration is defined as amount of solute per amount of solution or solvent.

To convert from ppm by mass to ppm by volume, divide by the density of the particles.

The conc of CO = 103 mg/m³

=0.103 mg/m³ air

Molecular weight if CO = 28g/mol

Moles of CO = 0.103×10^-3 g/28g/mol

= 3.678×10^-6 mol

Calculate the volume of CO  as follows:

V=nRT/P

=3.678×10^-6 mol × 8.314 Pa m³/mol K × 298.15 / 101325 Pa

= 8.999×10^-8 m³ CO/m³ air

Convert units of V into pmv as follows

=8.999×10^-8 m³ CO/m³ air ×10^6

=8.999×10^-2 ppmv

Or 0.08999 ppmv

To know more about concentration, click on https://brainly.com/question/17206790

#SPJ4

Earliest to Latest:

hard, indivisible spheres → mostly empty space → electrons shells outside a central nucleus

What are electron shells?

In chemistry and atomic physics, electron shells can be thought of as the orbits of electrons around the nucleus. The shells closest to the nucleus are ``1-shell'' (also called ``K-shell''), ``2-shell'' (or ``L-shell''), ``3-shell'' (or ``M-shell''), and so on. away The shells correspond to the principal quantum numbers (n = 1, 2, 3, 4...) or are labeled alphabetically with letters in X-ray notation (K, L, M,...). A useful guide to understanding the electron shells of atoms is to note that each row in the conventional periodic table of elements represents an electron shell.

What is nucleus?

The atomic number, or atomic number of a chemical element, is the number of electric charges in the nucleus. For normal atomic nuclei, this equals the number of protons, or the number of protons found in the nucleus of each atom of that element.

Therefore, Earliest to Latest:

hard, indivisible spheres → mostly empty space → electrons shells outside a central nucleus

To know more about electron shells, check out:

https://brainly.com/question/2263604

#SPJ4

If the product contain succinimide, its IR spectra should show aprominent peak at around 1700 cm-1, indicating an incomplete reaction.

Because various elements have varying quantities of protons and varied numbers and configurations of electrons, they also have different spectra. The variations in spectra are a result of the energy that atoms absorb or emit as their electrons shift between different energy levels.

Every element generates an own collection of spectral lines. A line spectrum can be used to distinguish between different elements because no two produce the same spectral lines.

To know more about spectrum visit:

https://brainly.com/question/6836691

#SPJ4

The level of water in the graduated cylinder is 12.5 cm higher than the level of the water exposed to the atmosphere,  The total pressure of gases inside the graduated cylinder is 614 mmHg

given that :

The atmospheric pressure is 739 mmHg

The level of water in graduated cylinder = 12.5 cm = 125 mmHg

the expression for the pressure is given as :

P total = P atm - hρg

where , hρg = 125 mmHg

P atm = 739 mmHg

putting the values , we get :

P total = P atm - hρg

           = 739 mmHg - 125 mmHg

           = 614 mmHg

Thus, the total pressure inside the graduated cylinder is 614 mmHg.

To learn more about total pressure here

https://brainly.com/question/26555700

#SPJ4

According to the given statement the complete dissociation of ionic compounds is C₆H₁₂O₆ < NaCl ≈ CH₃OH < MgCl₂.

A composite is a material created by the chemical fusion of two or more elements. Bonds and metallic bonding are two typical forms of bonds that hold components in a compound together. Any synthesis will always include each ingredient in a specific ratio.

The formula for osmotic pressure (Π) is

Π = icRT

If T is constant,

Π = kic

C₆H₁₂O₆:

Π

= k × 1 × 1 = k

MgCl₂:

Π

= k × 3 × 1 = 3k

CH₃OH:

Π

= k × 1 × 2 = 2k

NaCl:

Π

= k  × 2 × 1 = 2k

The order of osmotic pressures is  

C₆H₁₂O₆ < NaCl ≈ CH₃OH < MgCl₂

To know more about Compound visit:

https://brainly.com/question/13516179?

#SPJ4

The complete question is -

The following solutions are prepared by dissolving the requisite amount of solute in water to obtain the desired concentrations. Rank the solutions according to their respective osmotic pressures in decreasing order assuming the complete dissociation of ionic compounds. Rank from highest to lowest osmotic pressure. To rank items as equivalent, overlap them. 1M C6H12O6, 1M MgCl2, 2M CH3OH, 1M NaCl

The chemical compound diborane has the molecular formula B2H6 and is made up of boron and hydrogen atoms. Diborane is a highly reactive oron hydraidw, which was once a possible rocket fuel for the us space program

Boranes are the name given to compounds that contain both boron and hydrogen atoms. One of the most basic boron hydrides is diborane. Boron hydrides and air combine effectively to create explosive combinations. At normal temperature, this material will fire rapidly. Diborane also goes by the names boro ethane and diboron hexahydride.

At room temperature, pure diborane does not react with oxygen or air, but instead produces significant amounts of impure B2O3 and energy.

3O2 + B2H6 = 3O3 + 3H2O

H equals -2165 KJ mol-1.

Trimethyl Borate is produced when diborane and methyl alcohol combine.

6CH3OH + B2H6 = 2B(OCH3)3.

ΔH = -2165 KJ mol-1 – Diborane reacts with methyl alcohol to give trimethyl Borate. B2H6 + 6CH3OH → 2B (OCH3)3 + 6H2

to know more about trimethyl borate visit

https://brainly.com/question/26509389

#SPJ4

By indicating that the number of hydrogen ions required to balance the positive charge on the cation is True, the formula for a base can be written down.

The hydroxyl ions (OH-) produced will mix with any hydrogen ions (H+) in the solution to generate water molecules (OH- + H+ = H2O), therefore we can also define a base as a substance that receives or accepts hydrogen ions (H+) that are already present in the solution.

Hydrogen is an alkali metal with one electron in the outermost shell. It loses one electron to create a cation, H+, much like alkali metals.

To know more about hydrogen ions visit:-

https://brainly.com/question/20309096

#SPJ4

A halogen substituent can be replaced by a deuterium atom in the preparation of a deuterated compound :

CH₃CHBrCH₂CH₃ + Mg + ether ---> CH₃CHMgBrCH₂CH₃  + D₂O  -->  

                                                                                        CH₃CHDCH₂CH₃

In The reaction with the deuterium donor , the Grignard reagent converts into R- D . the grignard reagent react with proton donor to convert R - MgX to R-H.  The grignard reagent the magnesium salt. the grignard reagent is an organometallic compound. the formula for the grignard reagent is RMgX.

CH₃CHBrCH₂CH₃ + Mg + ether ---> CH₃CHMgBrCH₂CH₃

CH₃CHMgBrCH₂CH₃  + D₂O  -->        CH₃CHDCH₂CH₃

Thus, the above reaction is the preparation of a deuterated compound.

To learn more about deuterated here

https://brainly.com/question/29582706

#SPJ4

The sodium potassium pump transports Na+ out of the cell and K+ into the cell.

To learn more about sodium potassium pump, visit:

brainly.com/question/8507057

#SPJ4

The molar concentration of nitrate ions in the resulting solution is 0.20M.

Molar concentration, also known as molarity, quantity concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as a percentage of its volume. The number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.

Now let us come to our problem statement;

Nitrate from NaNO₃:

75.0 mL × 0.20 M = 15 mmol NaNO₃ = 15 mmol NO₃⁻

Nitrate from Ba(NO₃)₂:

25.0 mL × 0.10 M = 2.5 mmol Ba(NO₃)₂

2.5 mmol Ba(NO₃)₂ × [tex]\frac{2mmol NO3}{1mmol Ba(NO3)2}[/tex]  = 5.0 mmol NO₃⁻

So the final number of NO₃⁻ moles is (15 + 5) 20 mmol.

The final volume is (75 + 25) 100 mL.

So the molar concentration is:

20 mmol / 100 mL = 0.20 M

The molar concentration of nitrate ions in the resulting solution is 0.20M.

To refer more about molar concentration visit:

https://brainly.com/question/26528084

#SPJ4

No, the initial concentrations affect the equilibrium concentrations of reactants and the products.

The equilibrium constant does not depend on the initial concentration of reactants but depends on concentration  of various species at equilibrium .

The equilibrium constant is the ratio between the product of the molar concentrations of the products to that of the product of the molar concentrations of the reactants with each concentration term raised to a power equal to stoichiometric coefficient in the balanced chemical equation.  

If you increase the concentration of a reactant or product participated in an equilibrium, the system will absorb some of the added material and after some time the system will re establish equilibrium. When you recalculate Keq, you get the same value.

It changes with the change in the temperature.

To look more about equilibrium constant click here

brainly.com/question/10038290

#SPJ4

The molar heat capacity of ethanol is 107 J⋅°C-1mol-1.

What is Molar Heat Capacity?

The amount of heat required to raise the temperature of 1 mole of a substance by 1 unit is known as the molar heat capacity, which is calculated by dividing heat capacity by the total number of moles.

The quantity and size of the substance have an impact on heat capacity, a complex property. A modified notion known as specific heat capacity, or just specific heat, is commonly used in physics. Because it is unaffected by the quantity of the substance, specific heat is a more useful characteristic.

The term "specific heat" refers to the amount of energy required to increase a substance's mass by one unit of temperature. It can be calculated quantitatively as the heat capacity of a substance divided by its mass.

q = amount of heat transferred

n = number of moles

c = molar heat capacity

ΔT = change in temperature

q=ncΔT

The molar heat capacity of ethanol is 107 J⋅°C-1mol-1.

Learn more about Molar heat Capacity from given link

https://brainly.com/question/15080895

#SPJ1

The blood interacts with the bicarbonate, C03²-, from the acid to balance it when acid is supplied to the blood buffer system.

A buffer is a substance that can withstand a pH shift when acidic or basic substances are added. Small additions of acid or base can be neutralized by it, keeping the solution's pH level largely constant. For procedures and/or reactions that call for certain and stable pH ranges, this is significant.

Buffer solutions can resist the pH change when a strong acid or base is added sparingly. A strong acid and also its salt can be used as a buffer. It is a mixture of sodium acetate and acetic acid, CH3COOH + CH3COONa.

To know more about buffer system visit:

https://brainly.com/question/22821585

#SPJ4

The effective nuclear charge, denoted by the letter X, grows with period, and this is the right response to the question above.

Here, X stands for the effective nuclear charge. And it may be computed by deducting the number of core electrons from the amount of protons. The positive attraction that nuclear protons exert on valence electrons is known as the effective nuclear charge. Due to the shielding effect, the effective nuclear charge is always lower than the total amount of protons in a nucleus.

Despite the fact that nuclear charge rises as atomic number increases in both period and group. In a group and over a period, the effective nuclear charge exhibits opposing patterns. It increases along with period (due to increasing nuclear charge with no accompanying increase in shielding effect).  And decreases in group (although nuclear charge increases down a group, shielding effect more than counters its effect).

To know more about electrons visit:

https://brainly.com/question/1255220

#SPJ1

It is important to conduct multiple trials of an investigation to determine the melting point of ice in order to ensure accuracy and to account for any small variations or errors that may occur.

What is investigation?
Finding the response to a question using a variety of research techniques is the process of conducting a scientific investigation. An investigation typically starts when a person observes their surroundings and poses questions they are unsure of the answers to. After that, they conduct additional observations or design an experiment to verify a theory. The researcher could indeed present findings that make an attempt to address their questions by gathering and analysing data. The experiment may be changed by the researcher to test for variables they hadn't originally thought of. A scientific investigation's primary goal is to advance knowledge. Researchers can discover explanations for natural phenomena through research and experimentation, and they can then use their discoveries to address issues in the real world.

Melting point is an important physical property of a substance and accurate measurements are necessary for many scientific experiments. Conducting multiple trials and averaging the results will help to reduce the impact of any errors and ensure the most accurate measurement of the melting point.

To learn more about investigation
https://brainly.com/question/28041080
#SPJ4

Electrical Bonding Evidence Quick Check:

1. Melting point, boiling point, surface tension, and vapor pressure (D)

2. Deciding on the appropriate equipment (C)

3. Mix ice with water until equilibrium is reached but some ice remains that is no longer melting (B)

4. It ensures that results are accurate (A)

5. The student should take the average of the results from all four trials (D)

------------

These are all 100%! I just took the test and all my answers were correct! Hope this helps you <3

Answer:  When a liquid becomes a solid what happens to the atoms in the solid?

The particles (atoms or molecules) are attracted to each other. The particles (atoms or molecules) vibrate but do not move past one another. The solid retains its shape.

Explanation:

The atoms in a liquid have more energy than the atoms in a solid. There is a special temperature for every substance called the melting point. When a solid reaches the temperature of its melting point, it can become a liquid. Where the Atoms vibrate but still stick together, not moving past, behind, etc of where they are.

The mass and temperature of the first container are multiplied together, and the result is added to the product of the mass and temperature of the second container to get the water temperature of the combination.

After that, divide the result by the total water masses in each container.

The amount of heat that the calorimeter can hold for each degree Celsius increase in temperature is known as its heat capacity.

Experimental analysis is required to determine the calorimeter's heat capacity. Studying how warm and cold water are combined is the simplest technique.

Since we are aware that the final amount of our dilution will be 150mL.

learn more about calorimeter refer

https://brainly.com/question/1407669

#SPJ4

The potential energy is stored in magnet as it is moved away from the iron such that it does more work to attract it.

We know that the term potential energy has to do with an energy that a body does possess because it is found at a particular point. We can say that is the energy that is at a point.

We know that a magnet is a material that is able to pick up metals. Since the magnet can pick metals up, we say that the metals are magnetizable materials. Given the fact that iron is a metal it follows that iron is a magnetizable material.

The ability of the magnet to attract the iron depends on the distance of the iron from the magnet. Thus, the magnetic potential energy has a lot to do with the distance of the separtion between the magnet and the ion. The greater the distance between the iron and the magnet, the greater the work that is done by the magnet to attract the iron.

Learn more about magnets:https://brainly.com/question/2841288

#SPJ1

Water has a 4.18 J/g specific heat capacity at 0 °C. Since 1500 ml of water weighs 1500 g, the enthalpy change for a 24.2 to 25.9 degree Celsius temperature difference is 10659 per mole or 1065.9 for 0.1 mol.

Calculating a reaction's enthalpy change analytically is called calorimetry. Given by, is the calorimetric equation that links mass, temperature difference, and specific heat capacity (c).

q = mc ΔT

given that the water has a 1500 ml capacity. Since water has a density of 1 g/ml, its mass is 1500 g. Water has a specific heat capacity of 4.18 J/°C g. Therefore, the following formula is used to compute the thermal energy of the reaction:

q = 1500 g ×  4.18 J/ °C g × (25.9 - 24.2 °C)

= 10659 J/mol

Hence, for 0.1 mol 10659  × 0.1 = 1065.9 J is the heat energy change for the reaction.

To know more about  specific heat visit:-

https://brainly.com/question/11297584

#SPJ4

The Bronsted-Lowry acid, base and the conjugate acid, and the conjugate base in each of the following reactions are mentioned below serially:

Bronsted-Lowry acid                                  Bronsted-Lowry base

HNO₃                                                           H₂O

H₂O                                                              NH₃

H₂SO₄                                                          OH⁻

H₂O                                                              C₂H₃O₂⁻

H₂PO₄⁻                                                         OH⁻

H₃O⁺                                                             H₂PO₄⁻

HCO₃⁻                                                           H₂O

H₂O                                                               HCO₃⁻

Conjugate acid:                                           Conjugate base:

H₃O⁺                                                             NO₃⁻

NH₄⁺                                                             OH⁻

H₂O                                                              HSO₄⁻

HC₂H₃O₂⁻                                                    OH⁻

H₂O                                                              HPO₄²⁻

H₃PO₄                                                          H₂O

H₃O⁺                                                            CO₃²⁻

H₂CO₃                                                          OH⁻

Bronsted-Lowry acids are substances that donate protons or H+ ions to other compounds to form conjugate bases. Bronsted-Lowry bases are substances that accept protons or H+ ions from other compounds to form conjugate acids.

For the given reactions:

a. HNO₃ + H₂O <---> H₃O⁺ + NO₃⁻

Bronsted-Lowry acid: HNO₃

Bronsted-Lowry base: H₂O

Conjugate acid: H₃O⁺

Conjugate base: NO₃⁻

b. NH₃ + H₂O <---> NH₄⁺ + OH⁻

Bronsted-Lowry acid: H₂O

Bronsted-Lowry base: NH₃

Conjugate acid: NH₄⁺

Conjugate base: OH⁻

c. H₂SO₄ + OH⁻ <---> HSO₄⁻ + H₂O

Bronsted-Lowry acid: H₂SO₄

Bronsted-Lowry base: OH⁻

Conjugate acid: H₂O

Conjugate base: HSO₄⁻

d. C₂H₃O₂⁻ + H₂O <---> OH⁻ + HC₂H₃O₂

Bronsted-Lowry acid: H₂O

Bronsted-Lowry base: C₂H₃O₂⁻

Conjugate acid: HC₂H₃O₂⁻

Conjugate base: OH⁻

e. H₂PO₄⁻ + OH⁻ <---> HPO₄²⁻ + H₂O

Bronsted-Lowry acid: H₂PO₄⁻

Bronsted-Lowry base: OH⁻

Conjugate acid: H₂O

Conjugate base: HPO₄²⁻

f. H₂PO₄⁻ + H₃O⁺ <---> H₃PO₄ + H₂O

Bronsted-Lowry acid: H₃O⁺

Bronsted-Lowry base: H₂PO₄⁻

Conjugate acid: H₃PO₄

Conjugate base: H₂O

g. HCO₃⁻ + H₂O <---> H₃O⁺ + CO₃²⁻

Bronsted-Lowry acid: HCO₃⁻

Bronsted-Lowry base: H₂O

Conjugate acid: H₃O⁺

Conjugate base: CO₃²⁻

h. HCO₃⁻ + H₂O <---> H₂CO₃ + OH⁻

Bronsted-Lowry acid: H₂O

Bronsted-Lowry base: HCO₃⁻

Conjugate acid: H₂CO₃

Conjugate base: OH⁻

To know more about Bronsted-Lowry acid and base, visit:

https://brainly.com/question/14938928

#SPJ1

what grade is this for?

Explanation:

The part of the third step when using stoichiometry to go from grams of a reactant to grams of a product is Mole ratio (option A).

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

Stoichiometric problems involving reactants mass to products mass can be solved in four simple steps:

This suggests that the third step when using stoichiometry to calculate grams of a reactant or grams of a product is to find the mole ratio.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Answer:

 To anyone who's wondering, the fourth step is

      D. Molar mass of product

(I just took the test and got it right).

Explanation:

The volume will be 2400 ml.

The equation used here will be

M1 × V1 = M2 × V2

M1 = initial concentration

M2 = final concentration

V1 = initial volume

V2 = final volume

So according to the data;

M1 = 12m

M2 = 0.15m

V1 = 30ml

V2 = ?

By putting the values in the equation as follows;

M1 × V1 = M2 × V2

V2 = M1 × V1  / M2

By putting the values given in the question we will solve this question as follows

V2 =  12 × 30 / 0.15

V2 = 360 / 0.15

So the volume used will be;

V2 = 2400 ml

To look more about moles click here

brainly.com/question/26416088

#SPJ4

Neither green algae nor embryophytes have a developed characteristic of having tissue that conducts water.

Embryophytes and aquatic "green algae" make up the majority of green plants.

Non-vascular plants lack the xylem and phloem that make up a vascular system.

Green algae are unable to grow as tall as the majority of vascular plants because they lack lignified water-conducting tissues.

What is xylem?

The vascular tissue is absent in green alge, which are divided into various unrelated families.

The majority of scientists believe that the xylem's real water conducting tissue is green. The tissue of the plant's vascula transports water and dissolved minerals from the roots to the rest of the plant while also offering structural support.

Tracheary elements are a general term for a variety of specialised water conducting cells found in xylem tissue.

Therefore, Green algae and embryophtes cannot be considered as both since they lack the xylem, a water-conducing tissue, and as a result cannot be both.

To learn more about xylem

Here: https://brainly.com/question/1412188

#SPJ4

Answer: 4

Explanation:

Answer: The Rutherford model.

Explanation: