Answer:
The easiest way to identify which variable in your experiment is the Independent Variable (IV) and which one is the Dependent Variable (DV) is by putting both the variables in the sentence below in a way that makes sense.
“The IV causes a change in the DV. It is not possible that DV could cause any change in IV.”
Explanation:
Find the number of electrons in the subshell with azimuthal quantum number l=2
Answer:
23 electrons
Explanation:
i just know because im a god
A basketball and a bowling ball are relatively the same size or volume. Explain which ball is denser and why.
Answer:
The Bowling Ball is Denser.
Explanation:
If we consider both balls in terms of mass they are very different. Size and volume can be the same though.
What makes the mass? Think of what fills each of the balls.
A Basketball is filled with air, which weighs very little.
Meanwhile, a bowling ball is filled with coverstock, made up of plastic, urethane and resin. These materials weigh considerably more than air!
how long did it take the flag to rotate once in a full circle
Answer:
360 degrees is one full rotation starting at zero
it take 2 s to the flag to rotate once in a full circle with 3 rad/s of angular velocity.
What is Angular velocity and acceleration ?Angular velocity is "rate of change of angular displacement with respect to time". i.e. ω= dθ/dt. it is also defined as angular displacement over time. i.e. ω = angular displacement/Time.
Angular velocity shows how much angle can be covered in unit time. It's SI unit rad/s.
Angular acceleration is rate of change of Angular velocity with respect to time.
i.e. α = dω/dt if an object changes its angular velocity in short time, we can say that it has greater angular acceleration. It is expressed in rad/s².
In this problem we have to calculate time, but the angular velocity id not given.
Consider the angular velocity is 3 rad/s.
Given,
Angular displacement θ = 2π
angular velocity ω = 3 rad/s
Time t = ?
Time = θ/ω
Time = 2π/3 rad/s = 2 s
Hence the answer is 2s.
To know more about angular velocity :
https://brainly.com/question/29557272
#SPJ2.
The energy of an electromagnetic wave is related to its amplitude.
Answer:
True
Explanation:
The energy carried by a wave is proportional to its amplitude squared. The larger the strength of the electric and magnetic fields, the more work they can do and the greater the energy the electromagnetic wave carries. A wave's energy is proportional to its amplitude squared (E2 or B2).
The atmospheric pressure is 1atm what does it mean?
Answer:
A unit of pressure equal to the air pressure at sea levels is called 1atm. • 1atm = 760mmHg at 0°Celsius under the standard gravitational force or you can say standard gravity. • 1atm is also equal to 14.7 pounds per sq. Inch ( 1.01325 × 105 pascals )
Explanation:
Please Mark as BRAINLIEST
Se dispara un proyectil con una velocidad de 50 m/s con un Angulo de 37° respecto a la horizontal. Calcular después de que tiempo se encontrará a 25m de la superficie por segunda vez
La posición vertical del proyectil es:
y = 50 m/s sen37° - 1/2 . 10 m/s² t²; sen37° ≈ 0,6
Omito las unidades:
y = 30 t - 5 t²;
Según el enunciado es y = 25
Luego 25 = 30 t - 5 t²; o bien t² - 6 t + 5 = 0
Es una ecuación de segundo grado en t, que resuelvo directamente:
t = 1 s, t = 5 s
Pasa por primera vez en 1 s (subiendo)
Pasa por segunda vez en 5 s (bajando)
Which plant tissue makes up the thinnest layer?
Answer: Epidermis tissue.
Explanation: Layer of cells covering surface of entire plant, what it does is Acts as a barrier to fungi and other microorganisms and pathogens. the thin layer because it Allow for light to pass through, thereby allowing for photosynthesis in the tissues below
Please help
How would u define energy
Energy is being produced in two different ways.
1st. when you run, exercise, etc allot of energy is being produced from your body in form of heat.
2nd. energy which is in form of coal, electricity, gas etc.
Definition: the capacity for doing work. It may exist in potential, kinetic, thermal, electrical, chemical, nuclear, or other various forms. There are, moreover, heat and work—i.e., energy in the process of transfer from one body to another.
hope this helps you
have a great day :)
The Magnetic Field in a current carrying wire comes due to flow of electricity . But does the field generate or comes in simulataniously with the flow. if simulataniously then how?
Answer:
Electric current produces a magnetic field. This magnetic field can be visualized as a pattern of circular field lines surrounding a wire. ... Magnetic Field Generated by Current: (a) Compasses placed near a long straight current-carrying wire indicate that field lines form circular loops centered on the wire.
Explanation:
[tex]\large \bf\gray\dagger\pink{\frak{Solution}\curvearrowright}[/tex]
The feild never generates magnetic field on it's on. It simulataniously because when the flow of current stops , it loses it's magnetism and then there will no magnetism thus no magnetic feild.
Which statement best describes scientific theories? (2 points) Group of answer choices Scientific theories are based on facts that describe natural events. Scientific theories describe natural events but do not explain them. Scientific theories are facts based on observations of events in the natural world. Scientific theories attempt to explain how events occur in the natural world.
Answer:
Scientific theories attempt to explain how events occur in the natural world.
Answer:
The answer is option A. Scientific theories attempt to explain an entire group of related phenomena.
Explanation:
I got it right on the test
Hope it helps!
5. An object placed 3m from a plane mirror is shifted by 1 m away from the mirror. What is the distance between the object and its image?
Answer:
distance of object from mirror=distance of image from mirror
so distance between object and image=distance of object from mirror+distance of image from mirror
=2 x distance of object from mirror
=2 x (3+0.4)m
=2 x (3.4)m
=6.8 m
Explanation:
hope this helps :)
Derive P=4T/R from fluid mechanics
To Find: Diameter of soap bubble =? Solution: By Laplace's law of spherical membrane for a bubble. (Pi– Po) = 4T / r.
PLEASE HELP THE TEST IS DUE AT 11:59PM
24 p and 25 e is a negative atom because it has one electron and became
Answer:
and became negativity charged
Explanation:
this is because it has an extra electron and does not maintain extet or duplet structure
if kinetic energy of a body of mass 10 kg is 2000 J find velocity
Answer:
I guess answer is 10m/s.
Explanation:
Kinetic Energy=1/2 mv^2
or,2000J=1/2×10kg×v^2
or2000J=5kg.v^2
or,2000J/5kg=v^2
or,100J/kg=v^2
or,v=10m/s
A simple string light produces 10 J of light energy each second. What is
the efficiency of the light bulb if it uses up 200 J each second? Show work
A. 5%
B. 10%
C. 20%
D. 25%
If the mass of the cement is 15 000 kg, calculate the density of this cement sample in kgm-3
Explanation:
Hi there!
Mass of the container (m) = 15000 kg
Also from the figure;
Volume of the container (V) = l*b*h
{ From figure length = 2m , breadth = 1.1m, height = 2.5m}
So,
V = (2*1.1*2.5) m³
= 5.5m³
Then;
Density (d) = m/v
= 15000/5.5
= 2727.27 kgm³
Therefore, the density is 2727.27 kgm³.
Hope it helps!
A copper vessel contains 200 gram of water at 24°C. 112 gram of water at 42° C is added, the resultant temperature of water is 30°C. Calculate the thermal capacity of the calorimeter.
The heat capacity depends is the heat absorbed by the calorimeter as
the temperature changes.
Response:
The thermal capacity of the calorimeter is 100.416 J·K⁻¹What the thermal capacity and how can it be calculated?Mass of the vessel. m₁ = 200 gram
Temperature of the water, T₁ = 24°C
Mass of the warm water, m₂ = 112 grams
Temperature of the warm water, T₂ = 42°C
Resultant temperature of the water, T₃ = 30°C
The heat capacity of the water = 4.184 J·Kg⁻¹·K⁻¹
Heat lost by the warm water = Heat gained by the cold water + The heat gained by the calorimeterLet C represent the thermal capacity of the calorimeter
We have;
Change in heat, ΔH = m·c·ΔT
Therefore;
112 × 4.184 × (42 - 30) = 200 × 4.184 × (30 - 24) + C×(30 - 24)
5623.296 = 5020.8 + 6·C
6·C = 5623.296 - 5020.8 = 602.496
[tex]The \ heat \ capacity \ of \ the \ calorimeter, \ C = \dfrac{602.496}{6} = \mathbf{ 100.416}[/tex]
The thermal capacity of the calorimeter, C = 100.416 J·K⁻¹Learn more about heat capacity of a substance here:
https://brainly.com/question/10541586
1. What part (or parts) of this system store potential energy?
2. What part (or parts) of this system use kinetic energy?
Answer:
➢when you crank you make kinetic energy and then the kinetic energy makes potential energy.
Explanation:
hope it will help you have a great day bye and Mark brainlist if the answer is correct
[tex]kai6417[/tex]
#carry on learning
An object is dropped from a tower 128 m high. a. What is the speed of the object that falls freely from rest for a distance of 128 m?
The speed of the object falling freely from rest for the given distance is 50.09m/s.
Given the data in the question:
Hight of tower; [tex]h = 128m[/tex]Since object is initially at rest, initial velocity; [tex]u = 0[/tex]Free Fall Motion
A free fall is simply any motion of a body where gravity is the sole influence.
From the third equation of motion;
[tex]v^2 = u^2 + 2gh[/tex]
Where v is final velocity, u is initial velocity, h is height and g is acceleration due to gravity ( [tex]g = 9.8m/s^2[/tex] ).
To determine the speed of the falling object, we input our values into the expression.
[tex]v^2 = u^2 + 2gh\\\\v^2 = (0)^2 + [ 2 * 9.8m/s^2 * 128m ]\\\\v^2 = 2 * 9.8m/s^2 * 128m\\\\v^2 = 2508.8m^2/s^2\\\\v = \sqrt{2508.8m^2/s^2} \\\\v = 50.09m/s[/tex]
Therefore, the speed of the object falling freely from rest for the given distance is 50.09m/s.
Learn more about the Equations of motion: https://brainly.com/question/18486505
What behavior of light is evidence for a wave model of light.
Explanation:
the intersection behavior
What simple machine would you use to chop down a tree?
Explanation:
i will use chainsaw to cut a tree and even if that doesn't work I will use axe to make my work easy.
hope this helps you
please mark me brainliest
have a great day :)
Please help me. I have to submit this today.
What would cause a beam of light to increase in wavelength and bend away from the normal? A) Passing from a round glass into a square glass B) Passing from air into glass C) Passing from a water faucet into a bathtub of water D) Passing from glass into air brainly
Answer:
i think it A sorry if i get it wrong but it should be A
Explanation:
Which group of objects refract light energy?
A.Shiny object, glasses and mirror
B.glasses, prism, and passing through water
C.Glasses, prism and mirror
D.Mirror, glasses, and passing through water
Answer:
B. glasses, prism, and passing through water
Explanation:
Mirrors reflect, not refract.Glasses, water and prism refract.*Note:- When light is bounced back it is called reflection.
[tex]\red{ \rule{35pt}{2pt}} \orange{ \rule{35pt}{2pt}} \color{yellow}{ \rule{35pt} {2pt}} \green{ \rule{35pt} {2pt}} \blue{ \rule{35pt} {2pt}} \purple{ \rule{35pt} {2pt}}[/tex]
Answer⤵️Which group of objects refract light energy?
B.glasses, prism, and passing through waterA proton is accelerated to one-tenth the velocity of light, and this velocity can be measured with a precision of 1%. What is the uncertainty in the position of this proton
The uncertainty in the position of the proton is 1.1 x 10⁻¹³ m.
Velocity of the protonThe velocity of the proton is calculated as follows;
[tex]v = \frac{1}{10} \times 3\times 10^8 \ m/s = 3 \times 10^7 \ m/s[/tex]
precision of the velocity, Δv = 0.01 x 3 x 10⁷ = 3 x 10⁵ m/s
Uncertainty in the position of the protonThe uncertainty in the position of the proton is calculated as follows;
[tex]\Delta xm\Delta v= \frac{h}{4\pi} \\\\\Delta x = \frac{h}{4\pi m\Delta v} \\\\\Delta x = \frac{6.67 \times 10^{-34} }{4\pi \times 1.67 \times 10^{-27} \times 3\times 10^5} \\\\\Delta x = 1.1 \times 10^{-13} \ m[/tex]
Thus, the uncertainty in the position of the proton is 1.1 x 10⁻¹³ m.
Learn more about uncertainty here: https://brainly.com/question/1970053
Which of the following is an example of a behavioral adaptation?
Answer:
b. migration
A migration can be defined as the changes that occur in the behavior, structure, physiology of the organism so as to allow it to survive in unfavorable environmental conditions. Behavioral adaptation can be defined as the changes that occur in an organism's behavior which affects it's actions and helps it to survive like choice of mating partner, calling the mates for copulation and migration to different location all are the examples of the behavioral adaptations
Explanation: Behavioral adaptations are the things organisms do to survive. For example, bird calls and migration are behavioral adaptations. Adaptations are the result of evolution. Evolution is a change in a species over long periods of time.
Which two personality traits are categorized as Energy, which shows where your mental energy is typically directed?
The personality traits extraversion and openness are are categorized as Energy because their mental energy is typically directed action and creativity.
What are personality traits?Personality traits refers to characters and attitudes that describes an individual.
Many researchers believe there are five key personality traits:
extraversionagreeableness,openness,conscientiousness, andneuroticism.The personality traits extraversion and openness are are categorized as Energy because their mental energy is typically directed action and creativity.
Learn more about personality traits at: https://brainly.com/question/15462901
The diagram below shows a boat moving north in a river at 3m/s while the current in the river moves south at 1 m/s.
How will the boat be affected if it enters a part of the river where the current is moving south at 4 m/s?
Answer it will move slower:
Explanation: cause the force that’s opposite of it
WHICH ONE IS CORRECT???
Answer:
A
Explanation:
Answer:
According to Pascals law, THE PRESSURE EXERTED TO A CONFINED LIQUID IS TRANSMITTED EQUALLY AND UNDIMINISHED IN ALL DIRECTIONS THROUGHOUT THE MASS OF THE LIQUID--Blaise Pascal
so the pressure at A2 must be equal to A1
buy however the F1 will be less than F2 since:
P1=F1/A1 and P2=F2/F1
P1=P2 according to Pascal
so, F1/A1=F2/A2
with less amount of force at P1 THE force gets multiplied.
Therefore it's obvious that option A and B is wrong. I can't see option C properly.
but, you are going to have this option.
C.F1>F2
so the option with F1>F2 is correct
PLEASE MARK BRAINLIEST
Elena Walks at a speed of 1.4m s^-1How long will it take her to travel 500mhow far will she travel if she walks for 2 hours? give your answer in units of km.
[tex]\bold{\huge{\pink{\underline{ Solution }}}}[/tex]
Given :-Elena walks at a speed of 1.4m/sTo Find :-We have to find the time taken by Elena to cover a distance of 500 mAnd, The distance covered by Elena in 2 hoursConcept Used :-
Here, we will use the concept of speed, distance and time
Speed is the distance per unit time Distance is measurement of length between two or more point of reference Time is the distance by speed Let's Begin :-We have given two conditions here
How long it will take Elena to cover distance of 500 mHow far she travels if she walks for 2 hours Condition 1 :-We know that,
[tex]\bold{\pink{ Speed = }}{\bold{\pink{\dfrac{ Distance }{Time}}}}[/tex]
Speed = 1.4m/sDistance = 500 mSubsitute the required values in the above formula :-
[tex]\sf{1.4 = }{\sf{\dfrac{ 500 }{t}}}[/tex]
[tex]\sf{ t = }{\sf{\dfrac{ 500 }{1 .4}}}[/tex]
[tex]\sf{ t = }{\sf{\dfrac{ 500 }{1.4}}}[/tex]
[tex]\bold{\boxed{\red{ t = 357.14 \:sec }}}[/tex]
Hence, Time taken by Elena to cover distance of 500 m is 357.14 sec
Condition 2 :-We know that,
[tex]\bold{\pink{ Speed = }}{\bold{\pink{\dfrac{ Distance }{Time}}}}[/tex]
Speed = 1.4m/s or 5.04km/h[ Speed = 1.4 * 60 × 60/1000
Speed = 1.4 × 18/5 = 5.04 km/h }
Time = 2 hoursSubsitute the required values in the above formula :-
[tex]\sf{ 5.04 = }{\sf{\dfrac{ S(Distance)}{2}}}[/tex]
[tex]\sf{ S = 5.04 }{\sf{\times{ 2}}}[/tex]
[tex]\bold{\tt{\boxed{\red{ S = 10.08 km }}}}[/tex]
Hence, The distance covered by Elena in 2 hours is 10.08 km.