The state symbols for the reactants, products, and addition are as follows: Mg(s) + H2SO4 (aq) MgSO4 (aq) + H2 (g), where the sole reactants are H+(aq) and Fe (s). H2 is the offered product (g).
What are H2 O2's reactant and product?Energy is released and the molecules of hydrogen and oxygen can join to generate either water or hydrogen peroxide when the molecules of H2 and O2 are mixed and allowed to react.
What substances are the reactants and products in this reaction?The substance or substances to the left of the arrow in a chemical equation are the reactants. Reactants are substances that are present at the beginning of a chemical reaction. The substance or substances to the right of the arrow are products.
To know more about products visit:-
https://brainly.com/question/22852400
#SPJ4
1. Identify the anode and the cathode in the following combinations of half-cells. Remember that Ecell Eox + Ered and that Egell must be positive in order to function as a voltaic cell. You may use tables of standard reduction potentials in your text. a) Fe/Fe and Zn/Zn anode cathode b) Ag/Ag' and Sn/Sn c) Zn/Zn*2 and Cu/Cu2 d) Sn/Sn2 and Al/Al 2. Sketch a voltaic cell consisting of lead anode and a copper cathode. Clearly label both electrodes, the voltmeter, salt bridge, the direction of electron flow, and suggest possible salts which could be dissolved in the half cells to complete the cell.3. Give the cell notation for a voltaic cell consisting of a metallic iron anode immersed in a solution of FeCly, and a metallic copper cathode immersed in aqueous Cu(NO3)2.
a) Fe is the anode and Cu is the cathode. b) Ag is the cathode and Sn is anode c) Zn is anode and Cu is cathode d) Al is cathode and Sn anode.
2. What type of salts are used in the half cells to complete the cell?Possible salts that can be dissolved in half cell to complete the cell : potassium chloride (KCl) and potassium nitrate (KNO3) are better inert salts.
A salt bridge's main function is to maintain electrical neutrality between two beakers and to do so the salt used must be inert. The ions must to move to and forth between the two half cells.
3. Cell notation for a voltaic cell consisting of metallic iron anode immersed in a solution of FeCl3 and a metallic copper cathode immersed in aqueous Cu(NO3)2.
Fe°|Fe3+|| Cu2+|Cu
Left electrode -- anode and right electrode -- cathode.
To know more about salt bridge, refer
https://brainly.com/question/13937976
#SPJ4
Which of the following characteristics of K+ channels are important for the selectivity for K+ rather than other ions?
K+ channels are important because carbonyl groups lining the wall of the pore and can interact with the unsolvated K+ ion, balancing the energy needed to remove the hydration shell.
What is the role of K + ion channels in an action potential?Potassium channels play a role in repolarization of the membrane, which follows membrane depolarization by Na, and in some cases Ca, channels during the action potential; this is necessary for returning the membrane to a negative potential to terminate the action potential signal.
What effect does opening K+ channels have on membrane potential?Opening of K+ channels in cell membranes with resulting increase in K+ conductance, shifts the membrane potential in a hyperpolarizing direction ,the K+ equilibrium potential. Hyperpolarization reduces the opening probability of ion channels involved in membrane depolarization and excitation is minimized.
Learn more about hyperpolarization on:
https://brainly.com/question/12982897
#SPJ4
Select all of the following amino acids that will create salt-bridges.
Serine
Aspartate
Histidine
Valine
Among the given amino acids, serine, aspartate and histidine can create protein salt bridges.
How amino acids take part in salt-bridge formation?Two non-covalent interactions—hydrogen bonding and ionic bonding—combine to form a salt bridge. One of the most significant noncovalent forces in chemistry and in biological systems is ion pairing. In a normal acid-base neutralization process, amino acids interact with one another to create salt. Simple attraction between the positive and negative charges and the shift of the -H (positive ion) from the acid to the amine constitute the reaction.
Amino acids that take part in bridge formation are- The anionic carboxylate (RCOO) of either aspartate or glutamate and the cationic ammonium (RNH3+) from lysine or the guanidinium (RNHC(NH2)2+) of arginine most frequently form the salt bridge. Although these are the most frequent, depending on external variables, additional residues with ionizable side chains like histidine, tyrosine, and serine can also take part in salt bridge formation.
Know about amino acids at:
https://brainly.com/question/13151127
#SPJ1
Serine, aspartate, and histidine can build protein salt bridges among the other amino acids mentioned.
How do amino acids contribute to the creation of salt bridges?
A salt bridge is created when two non-covalent interactions—hydrogen bonding and ionic bonding—combine. Ion pairing is one of the most important noncovalent forces in chemistry and in biological systems. Amino acids interact with one another to produce salt during a typical acid-base neutralization process. The reaction is simply the shifting of the -H (positive ion) from the acid to the amine and the attraction of the positive and negative charges.
The anionic carboxylate (RCOO) of either aspartate or glutamate, the cationic ammonium (RNH3+) from lysine, or the guanidinium (RNHC(NH2)2+) from arginine, are the amino acids that participate in bridge building. Although these are the most frequent, salt bridge creation can also involve other residues with ionizable side chains such histidine, tyrosine, and serine depending on the environmental factors.
To learn more about amino acids:
brainly.com/question/13151127
#SPJ1
A chamber contains equal molar amounts of C₂H₂, CH₄, and H₂. If the total chamber pressure is 5.00 atm, then the partial pressure of C₂H₂ is:
Answer: 1.67 atm
Explanation:
Since the molar amounts are equal, this means that the partial pressure of acetylene is 1/3 of the total chamber pressure.
what is the equation for the equilibrium constant of 2 CrO 4 2 − (aq) + 2 H + (aq) ⇌ Cr 2 O 7 2 − (aq) + H 2 O (l)
The equation for the equilibrium constant K = [ Cr₂O₇²⁻] [ H₂O ] / [ Cr₂O₇²⁻ ]² [ H⁺]².
What is equilibrium constant ?For a chemical reaction, the equilibrium constant can be defined as the ratio of reactant to product that is used to determine chemical behavior. At equilibrium, the forward reaction rate equals the backward reaction rate.
Equilibrium constants vary with temperature and are unaffected by reaction quantities, catalysts, or inert materials. Furthermore, it is unaffected by reactant concentrations, pressures, or volumes. In general, the temperature dependence of the equilibrium constant is determined by H of the reaction.
Thus, The equation for the equilibrium constant K = [ Cr₂O₇²⁻] [ H₂O ] / [ Cr₂O₇²⁻ ]² [ H⁺]².
To learn more about an equilibrium constant, follow the link;
https://brainly.com/question/10038290
#SPJ1
After considering the results of the classification tests, the possibilities can be narrowed down further by determining the melting point of the
A derivative.
B Schiff addition product.
C iodoform.
D triiodo compound.
After considering the results of the classification tests, the possibilities can be narrowed down further by determining the melting point of the B Schiff addition product.
What two facts can you infer about your product based on its melting point range?
A compound's melting point is helpful in two ways: it provides information on the composition's identity and degree of purity. Impurities will affect a compound's melting point, resulting in broader and lower melting point ranges.
First, the solubility test must be performed in order to remove soluble contaminants from the target molecule. The desired chemical and the soluble impurities are dissolved in a minimum of near or boiling solvent once a suitable solvent has been selected. The solution is then given time to gradually cool.
Learn more about Schiff addition product refer
https://brainly.com/question/14748028
#SPJ4
____ measures the _____ released when an isolated atom ______ an electron to form a _____ ion. ____ measures the ____ of the atom to hold on to its own electrons and attract electrons from other atoms in compounds. 1.ability2.1-3.1+4.heat5.potential6.gains7.energy8.loses9.The electronegativity10.Electron affinity
The text to complete refers to electronegativity and electron affinity.
Completed sentence about electronegativity and electron affinityThe electronegativity measures the energy released when an isolated atom loses an electron to form a potential ion. Electron affinity measures the ability of the atom to retain its own electrons and to attract electrons from other atoms in compounds.
Both expressions are part of the atonic energy, that is, the energy contained in the nucleus of the atom and considered one of the largest.
Learn more about electronegativity at https://brainly.com/question/17762711
#SPJ4
18) Jamal performs an experiment where he mixes hydrochloric acid and zinc metal together. He writes a chemical equation that he thinks models his experiment.
2HCl(aq) + Zn(s) - ZnCl₂(aq) + H₂(g)
A) Heat was absorbed
B) A precipitate formed.
The color changed.
D) A gas was formed.
Answer:
the answer is D.
how many grams of aluminum chloride AICI3 form when .25 mol AI reacts
Answer: 333.415 grams of AlCl3
Explanation:
An unknown salt AS X H₂O was analyzed and found to contain 16.4 percent
.
water. If the anhydrous salt has a formula mass of 183 amu, find the water of
crystallization (X) for the hydrate.
the unknown salt AS X H₂O was analyzed and found to contain 16.4 percent water. If the anhydrous salt has a formula mass of 183 amu then the water of crystallization (X) for the hydrate is 7.
What is anhydrous salt?Those compound from which all the water molecules are removed is termed as anhydrous salt. These types of compounds can be used as desiccants (drying agents) that means they can absorb water from their surrounding.
Water of crystallization:In a crystalline state of a salt the no. of molecules of water are present in a definite molecular proportion is known as Water of crystallization.
Example : CaSO4.5H2O consist of 5 Water of crystallization.
To know more about anhydrous salt visit
https://brainly.com/question/14953867
#SPJ1
Analyses revealed that 16.4% of the unidentified salt AS X H2O contained water. The hydrate's water of crystallisation (X) is 7 if the anhydrous salt's formula mass is 183 amu.
What is sodium anhydrous?
Anhydrous salts are substances from which all of the water molecules have been eliminated. These kinds of substances can serve as desiccants, or drying agents, by absorbing water from their surroundings.
Water of crystallisation is the term used to describe the quantity of water molecules present in a specific molecular proportion in a salt that has crystallised.
Example: The water of crystallization for CaSO4.5H2O is 5.
To learn more about anhydrous salt.
brainly.com/question/14953867
#SPJ1
Suppose a runner completes a 10K (10.0 km) road race in 45 minutes and 35 seconds.
What is the runner's average speed in miles per hour?
The average speed of the runner in miles per hour would be 8.18 miles per hour.
What is the average speed?The average speed of a moving object is the ratio of the total distance traveled by the object and the total time taken to cover the distance. Mathematically, this can be expressed as;
Average speed = total distance traveled/ total time taken
In this case;
Total distance = 10 km
Total time = 45 minutes, 35 seconds
In order to find the average speed in miles per hour, let's convert the distance from km to mile and the time to hour.
1 km = 0.621371 mile
10 km = 10 x 0.621371
= 6.21371 miles
1 hour = 3600 seconds
60 seconds = 1 minute
45 minutes = 45 x 60
= 2700 seconds
Total time = 2700 + 35
= 2735 seconds
3600 seconds = 1 hr
2735 seconds = 2735/3600
= 0.7597 hour
The average speed of the runner in miles per hour:
6.21371/0.7597 = 8.18 miles per hour
More on average speed can be found here: https://brainly.com/question/12322912
#SPJ1
In a chromatography experiment, how do you identify the components of an unknown mixture? Select one: O Compare the Re values of the mixture components to the Ry values of pure known compounds. O Combine the mixture with a series of known compounds and observe the color of the dots. O Combine the mixture with multiple known compounds and look for the largest spots. O Compare the color of the mixture spots to the colors of pure known compounds.
The correct answer is
a. Compare the Re values of the mixture components to the Ry values of pure known compounds.
Chromatography can identify the components of an unknown mixture by comparing the retention time or retention index of the mixture components to that of known compounds.
Retention time is the time it takes for a compound to pass through a chromatographic column, and retention index is a measure of the distance a compound travels through the column compared to a set of reference compounds. Compounds in a mixture can be identified by comparing the retention time or retention index of the mixture components to pure known compounds.
Other techniques that can be used chromatographically to identify unknown mixture components include mass spectrometry, infrared spectroscopy, and nuclear magnetic resonance spectroscopy. These techniques involve analyzing the molecular properties of mixture components to determine their identities.
Read more about chromatography at:
brainly.com/question/25286710
#SPJ4
Perform the following operation
and express the answer in
scientific notation.
6.50×105 +5.40×104
? ]×10[?]
According to scientific notation, the answer of the operation is 7.04×10⁵.
What is scientific notation?Scientific notation is defined as a way of expressing numbers which are too large or too small so that they can be easily written in decimal form. It can be referred to the scientific form or the scientific index form or even the standard form.
Base ten notation is used by scientists, engineers as it helps in simplification of arithmetic operations. It contains the significant figures which include all non-zero numbers , the zeroes between significant digits and zeroes which are needed to be significant.
In scientific notation, the base should always be ten. The exponent should be a non-zero integer and it can be either positive or negative.In this case answer is obtained as 6.50×10⁵ +0.540×10⁵=7.04×10⁵.
Thus, the answer in scientific notation is 7.04×10⁵.
Learn more about scientific notation,here:
https://brainly.com/question/18073768
#SPJ1
Pretest: Unit 2
Question 15 of 34
Which of the following increases the H* concentration in solution?
A. Water
B. A base
C. An acid
O D. Salt
SUBMIT
It's a great day at the beach, and you're there for some fun and sun! One reason the day is so special is that the weather is so pleasant—sunny and warm. Energy from the sun warms the beach by (1) _______________. The breeze is warm enough to keep you warm, but it also keeps you from overheating. Ocean breezes move because energy is (2) ________________. When you lie down on the sand, you spread a beach towel down so that the sand will not make you too hot by (3) ______________________.
It's a great day at the beach, and you're there for some fun and sun! One reason the day is so special is that the weather is so pleasant—sunny and warm. Energy from the sun warms the beach with Radiation. The breeze is warm enough to keep you warm, but it also keeps you from overheating. Ocean breezes move because energy is Convection. When you lie down on the sand, you spread a beach towel down so that the sand will not make you too hot by transferring heat by Conduction.
Radiation is energy that comes from a source and travels through space at the speed of light. This energy has an electric field and a magnetic field.
Heat is transferred through convection, which is the large-scale movement of molecules inside gases and liquids. Conduction is used to move heat from the object to the fluid initially, but fluid motion is responsible for the bulk of the heat transfer.
Heat energy is transferred through the mechanism of conduction when nearby atoms or molecules collide. In solids and liquids, where particles are more closely spaced, conduction happens more easily than in gases, where particles are more widely spaced.
To know more about Ways of heat Transfer :
brainly.com/question/12342626
#SPJ4
A mixture of gases for the synthesis of ammonia with a mass of 1000.0 g at a temperature of 0 0C and pressure 2 atm occupies a volume of 1000.0 L.
1. Determine the volume fraction of gases in the mixture (in percent).
2. Write the equations for ammonia synthesis reactions in laboratories (3 methods).
3. Give the equation for the reaction of ammonia: a) with metal; b) with a non-metal; c) with metal oxide; d) with acid; e) with salt.
Answer:
1. or A. : .209%
B. : 1000.0 x .20
Explanation:
Reasoning About Photographing an Eclipse
Reasoning About Photographing an Eclipse
With your group, use the Reasoning Tool to connect each piece of evidence to the claim you think is correct.
Question: When can a lunar eclipse be photographed?
Claim 1: A lunar eclipse can be photographed anytime Earth is in between the sun and the Moon.
Claim 2: A lunar eclipse can be photographed sometimes when Earth is in between the sun and the Moon.
Evidence
This matters because . .
Therefore, . . .
(claim)
Example evidence: two Top View images
A lunar eclipse can be photographed sometimes when Earth is in between the sun and the Moon.
Evidence source: “An Ancient Machine for Predicting Eclipses” article
A lunar eclipse can be photographed sometimes when Earth is in between the sun and the Moon.
Evidence source: Earth, Moon, and Sun Sim
A lunar eclipse can be photographed sometimes when Earth is in between the sun and the Moon.
Evidence source: Moon Sphere Model
A lunar eclipse can be photographed sometimes when Earth is in between the sun and the Moon.
Therefore, the correct claim is: A lunar eclipse can be photographed sometimes when Earth is in between the sun and the Moon.
What is a Lunar Eclipse?A lunar eclipse occurs when Earth is positioned between the sun and the Moon, blocking the sun's light from reaching the Moon and casting a shadow on it.
However, not every lunar eclipse is visible and can be photographed. The visibility of a lunar eclipse depends on several factors such as the position of the moon in its orbit, the location of the observer on Earth, and the weather conditions.
Hence, the claim "A lunar eclipse can be photographed sometimes when Earth is in between the sun and the Moon" is supported by the evidence provided and is therefore correct.
Read more about lunar eclipse here:
https://brainly.com/question/8643
#SPJ1
Label each diagram (A, B, and C) as either convergent plate boundary, divergent plate boundary, or transform plate boundary. three plate boundaries
Diagram A is a divergent plate boundary, B is a convergent plate boundary and C is a transform plate boundary.
What are tectonic boundaries?Plate tectonics are boundaries between two or more plates moving towards each other, away from each other or past each other. When these occur they are known as either convergent, divergent or transform plate boundaries.
A convergent plate boundary, the tectonic plate converge by subduction, where the thin ocean crust slides beneath thick crust. It is divergent when the linear features are moving away from each other. For transform plate, the broad zone slides northwestward past the north plate.
The full question is:
Label each diagram (A, B, and C) as either convergent plate boundary, divergent plate boundary, or transform plate boundary. three plate boundaries
Learn more on tectonic boundaries here: https://brainly.com/question/838446
#SPJ1
Which of the following best demonstratesthat a chemical change has taken place?
The mass of the salt solution, beaker and nails
decreased.
The volume of the salt solution has decreased.
The salt solution was discolored after a week.
The iron nail is still undissolved in the solution
after a week.
Answer:
the last one
Explanation:
THE IRON NAIL IS STILL UNDISSOLVED IN SOLUTION AFTER A WEEK
Use the gizmo to explore whether the number of atoms present affects the half-life that you measure. describe your findings below:
In contrast, the ratio and total quantity of stable atoms are defined by the half-life.Whatever the initial number of atoms, the percent of decrease is constant.They can determine the quantity of original carbon-14 by using the carbon-14 half-life of 5,730 years and the ratio of carbon-12 to carbon-14.
What is the rate of change of the radioactive atom number?Since approximately half of the nuclei of each atom decay with each half-life, the number of radioactive atoms falls as the number of half-lives grows.
Amount has an impact on half-life?A longer dose interval will result from a longer half-life, which is reliant on both clearance and volume of distribution. For example, a CYP1A2 or CYP2C19 substrate can cause a decrease in clearance.
To know more about atoms visit:
https://brainly.com/question/13654549
#SPJ4
Which of the following is a hydroxide ion?
Select one:
O a. H*
Ob. H30
O c. (OH)*
O d. 0²-
Answer:
a
Explanation:
hope this helps for now
Which of these processes is a chemical change?
Answer:
Detailed Solution. The correct answer is Photosynthesis in plants. A chemical change takes place when a substance undergoes a chemical change i.e its molecular composition is changed entirely. It involves the formation of new substances and it is a permanent change.The alkyl halide shown below undergoes an elimination reaction. Select all possible elimination products from the given structures provided below. (1 pts)}
OPTION A and OPTION D are the possible products from the given structures provided.
Alkyl Halides: What Are They?
Alkyl halides are chemical compounds that are frequently generated from alkanes that include one or more halogens. They are also known as haloalkanes or halogenoalkanes. Alkyl halides are also a part of the larger category of halocarbons.What does alkyl halide mean?
An alkyl halide, as its name indicates, is a hydrocarbon molecule in which halogens stand in for one or more hydrogen atoms. Fluorine, chlorine, bromine, and iodine are among them. R-X, where X is a halogen and R is an alkyl group, is the general structure.What varieties of alkyl are there?
Make sure you understand the definitions of and use for the essential phrases listed below.Alkyl group, methyl group, isobutyl group, sec-butyl group, tert-butyl group, primary carbon, and secondary carbon.To know more about alkyl checkout this link:
https://brainly.com/question/6419720
#SPJ4
The question that I have is in the photo
Answer: 56.1 g
Explanation:
We begin by finding the formula mass of KCl.
The atomic mass of K is 39 g/mol.The atomic mass of Cl is 35.5 g/mol.So, the formula mass of KCl is [tex]39+35.5=74.5[/tex] g/mol.Therefore, 87.0 grams of KCl is equal to [tex]\frac{87.0}{74.5}=1.167785[/tex] moles.
From the reaction, we know that for every 2 moles of KCl produced, 3 moles of diatomic oxygen are produced. This means that there are [tex]1.167785(3/2)=1.7516775[/tex] moles of diatomic oxygen.
The formula mass of diatomic oxygen is 32 g/mol, meaning [tex](1.7516775)(32)=56.1[/tex] grams of diatomic oxygen were produced.
Find the number of grams in a 1.25 M solution of potassium nitrate (NO3) if we have
160 ml of the solution.
Answer:
12.4 g
Explanation:
M=1.25M
v=0.16L
molar mass = 62 g per mole
M=n/v
n=M*v
n=1.25M*0.16
n=0.2moln=mass of a substance /molar massmass of substance = n * M
m=0.2mole *62 g/mole
m=12.4g
Given a titration reaction, the titrant concentration and volume, and the analyte volume and mass, identify the titrant to analyte stoichiometry
Given a titration reaction, titrant concentration and volume, the analyte volume and mass, then to identify titrant to analyte stoichiometry : Put the coefficients of each compound in order and simplify if possible.
How do you identify analyte and titrant?During titration, there are two solutions: analyte and the titrant. Analyte is the unknown solution for which you would like to know the concentration or the equilibrium constant. The titrant is the known solution which has a precise and accurate concentration.
The stoichiometric point is the point where an equal amount of acid and base is present to neutralize chemical reaction. Known reagents added to chemical reaction are called titrant and unknown solution is called analyte.
To know more about titration, refer
https://brainly.com/question/186765
#SPJ4
What type of reaction is this? (Multiple choice)
This reaction is an example of double displacement reaction.
What is double displacement reaction?When two reactants change ions to create two new compounds, the reaction is referred to as a double displacement reaction. Double displacement reactions usually result in the development of a precipitate as a product.
The positive-charged cations and negative-charged anions of the reactants swap places (double displacement) to generate two new products in this sort of reaction. Also called: A metathesis reaction or a double replacement reaction are other names for a double displacement reaction.
The equation becomes:
AlBr₃ + K₂SO₄ → KBr + Al₂(SO₄)₃
Aluminium bromide (AlBr₃) reacts with potassium sulphate (K₂SO₄) to form potassium bromide (KBr) along with aluminium sulphate (Al₂(SO₄)₃).
Balanced reaction becomes:
2AlBr₃ + 3K₂SO₄ → 6KBr + Al₂(SO₄)₃
2 mol 3 mol 6 mol 1 mol
In this reaction, two moles of aluminium bromide react with three moles of potassium sulphate to produce six moles of potassium bromide along with one mole of aluminium sulphate.
So, this reaction is an example of double displacement reaction.
To know more about double displacement reaction refer to:
https://brainly.com/question/23918356
#SPJ1
according to the spectrochemical series, which of the following ligands has the strongest splitting field?
The increasing order of the crystal field splitting- I− < Br− < S2− < SCN− < Cl−< N3 < F−< NCO−< OH−<C2O42−< O2−< H2O < acac− < NCS− < CH3CN <gly <py < NH3 < en < bipy < phen < NO2− < PPh3 < CN− < CO.
Describe the spectrochemical sequence.The ligands (affections to a metal ion) are listed in the spectrochemical series according to the strength of their field. The series was created by superimposing various sequences acquired from spectroscopic research because it is impossible to generate the full series by examining complexes with the single metal ion.
Which ligands in the spectrochemical series are strong field ligands?The ligands cyanide and CO are classified as strong-field ligands, whereas the halides are weak-field ligands. Ligands such as water and ammonia are said to create medium field effects.
To know more about spectrochemical series visit :
https://brainly.com/question/15520506
#SPJ4
for a radical addition reaction involving hbr and propene, sort each reaction step into initiation, propagation and termination steps.
For a radical addition reaction involving HBr and propene , includes initiation , propagation and termination. the reaction is given as :
CH₃CH=CH₂ + HBr + peroxide ----> CH₃CH₂CH₂Br
1) The steps involves in the initiation steps are :
RO - RO ----> 2RO°
RO° + H- Br ----> ROH + Br°
2) this steps involves the propagation steps are :
CH₃ - CH = CH₂ + Br° ---> CH₃ - CH -CH₂ - Br
CH₃ - °CH - CH₂ - Br + H - Br ----> CH₃ - CH₂ - CH₂ - Br + Br°
3) the termination step include :
Br° + Br° ----> Br - Br
2 CH₃ - °CH - CH₂ - Br ---> CH₃ - CH - CH₂ - Br
|
CH₃ - CH - CH₂ - Br
CH₃ - °CH - CH₂ - Br + Br° ---> CH₃ - CH - CH₂ - Br
|
Br
Thus, the above steps are involved in the radical addition reaction.
To learn more about radical reaction here
https://brainly.com/question/27940482
#SPJ4
Consider the kinds of intermolecular forces present in the following compounds, and rank the substances in likely order of decreasing boiling point: H2SH2S (34 amuamu), CH3OHCH3OH (32 amuamu), C2H6C2H6 (30 amuamu), ArAr (40 amuamu).
In order of decreasing boiling point, CH3OH > H2S > C2H6 > Ar. The strongest types of bonding are ionic, covalent, hydrogen, and van der waals forces, in that order.
Give examples of each of the three forms of intermolecular forces?London dispersion forces (LDF), dipole-dipole interactions, and hydrogen bonds are different intermolecular forces. All substances have LDF, but molecules can have combination of these three types of intermolecular interactions.
What makes dipole-dipole the most powerful?The dipole-dipole forces increase with increasing polarity. Dipole-dipole forces are in an unique (stronger) case in this situation. It is possible for it to exist between a molecule with an N, O, or F atom that has a hydrogen atom bonded to it directly and another molecule with an N, O, or F atom that has a lone pair of electrons.
Learn more about ionic bond here:
https://brainly.com/question/11527546
#SPJ4