We are supposed to express an opinion on the opportunity to invest 10ME for the realization of a production initiative characterized by the following indicators:
Duration of the initiative: 8 years;
Costs: increasing linearly along the duration of the initiative from 500 to 1500kE/year;
Revenues: 6ME year
Tax rate: 40%.
Income rate: 0.12 year
Inflation rate and risk are negligible.
The investing in the proposed initiative is not profitable. If we look at the cost side of the project, the costs are continuously increasing every year. On the other hand, the revenue of 6ME per year is not enough to cover the cost of 1500kE at the end of the 8th year.
The net loss will be 1500kE-6ME = -900kE.
The profitability of any project depends on the costs and revenues of that project. In the given scenario, the costs of the project are increasing linearly along the duration of the initiative from 500 to 1500kE/year. In contrast, the revenues from the project are constant and equal to 6ME/year.
The tax rate is 40%, and the income rate is 0.12 year. Inflation rate and risk are negligible.After analyzing the costs and revenue of the project, it is concluded that the project is not profitable. If we look at the cost side of the project, the costs are continuously increasing every year. On the other hand, the revenue of 6ME per year is not enough to cover the cost of 1500kE at the end of the 8th year.
The net loss will be 1500kE-6ME = -900kE.
The proposed investment is not profitable and may cause a huge loss to the investor. Therefore, it is not recommended to invest in this initiative.
To know more about Tax rate visit :
brainly.com/question/30629449
#SPJ11
Use the forward Euler's method with stepsize h=0.1 to approximate the values of the function y which solves the initial value problem y′=3x−2y,y(0)=1 on the interval [0,0.5]. Then solve the above differential equation and make a table to compare your approximations with the true values to calculate ∣y6−y(0.5)∣. Show your answers to 6 decimal places. y6= y(0.5)=
To compare our approximations with the true values, we can create a table. The table will have columns for xn, approximated y-values (using forward Euler's method), and true y-values.
To approximate the values of the function y using forward Euler's method, we will use a step size of h = 0.1. The initial value problem is y′ = 3x − 2y, y(0) = 1, and we need to find the values of y on the interval [0, 0.5].
First, we'll divide the interval [0, 0.5] into smaller intervals with a step size of 0.1. So, we have x0 = 0, x1 = 0.1, x2 = 0.2, ..., x5 = 0.5.
Now, we'll use the forward Euler's method to approximate the values of y. The formula for this method is: yn+1 = yn + h * f(xn, yn), where f(xn, yn) is the derivative of y with respect to x evaluated at xn, yn.
Using this formula, we can calculate the values of y as follows:
For n = 0:
y1 = y0 + h * f(x0, y0) = 1 + 0.1 * (3*0 - 2*1) = 1 - 0.2 = 0.8
For n = 1:
y2 = y1 + h * f(x1, y1) = 0.8 + 0.1 * (3*0.1 - 2*0.8) = 0.8 + 0.03 - 0.16 = 0.67
Similarly, we can calculate y3, y4, y5 using the same formula.
For n = 5:
y6 = y5 + h * f(x5, y5) = y5 + 0.1 * (3*0.5 - 2*y5)
To find the true value of y(0.5), we need to solve the differential equation. By solving the differential equation analytically, we get y(x) = (3/4)x + (7/16)e^(-2x).
Using the table, we can calculate |y6 - y(0.5)| to find the absolute difference between the approximated value and the true value of y at x = 0.5.
I hope this helps! Let me know if you have any further questions.
To know more about approximations visit:
https://brainly.com/question/32926355
#SPJ11
The saturated unit weight and the water content in the field are found to be 18.55 kN/m' and 33%,
respectively. Determine the specific gravity of the soil solids and the field void ratio.
The specific gravity of the soil solids is approximately 2.62 and the field void ratio is approximately 0.673. Here is the calculation below:
To determine the specific gravity of the soil solids and the field void ratio, we need to use the given information on saturated unit weight and water content.
First, let's calculate the dry unit weight of the soil:
Dry unit weight (γ_d) = Saturated unit weight (γ) - Unit weight of water (γ_w)
Given that the saturated unit weight is 18.55 kN/m³ and the unit weight of water is approximately 9.81 kN/m³, we can calculate the dry unit weight:
γ_d = 18.55 kN/m³ - 9.81 kN/m³ = 8.74 kN/m³
Next, we can determine the specific gravity of the soil solids (G_s) using the relationship:
Specific gravity (G_s) = γ_d / (γ_w × (1 + e))
where e is the void ratio.
Given that the water content is 33%, we can calculate the void ratio:
e = (1 - water content) / water content = (1 - 0.33) / 0.33 = 1.03
Now we can substitute the values into the specific gravity equation:
G_s = 8.74 kN/m³ / (9.81 kN/m³ × (1 + 1.03))
Solving the equation, we find the specific gravity of the soil solids to be approximately 2.62.
To calculate the field void ratio, we can rearrange the specific gravity equation:
e = (γ_d / (G_s × γ_w)) - 1
Substituting the values, we get:
e = (8.74 kN/m³ / (2.62 × 9.81 kN/m³)) - 1
Solving the equation, we find the field void ratio to be approximately 0.673.
Therefore, based on the given information, the specific gravity of the soil solids is approximately 2.62 and the field void ratio is approximately 0.673. These values provide important insights into the properties of the soil and can be used in further geotechnical analyses and calculations.
Learn more about specific gravity visit:
https://brainly.com/question/29816648
#SPJ11
Julianne fong started a company which sells equipment to retrofit buildings for the physically challenged. julianne will pay $485.60 for a wheel chair access water cooler, with front and side push bars to activate that water fountain. if she decdes to mark up the pricr 37.5% based on cost, what will be the selling price ot the water cooler?
The selling price of the water cooler, after a 37.5% markup, will be $667.70.
To determine the selling price of the water cooler, we need to calculate the markup based on the cost and add it to the original cost. Given that Julianne will pay $485.60 for the water cooler, we need to find the markup price of 37.5% based on the cost.
To calculate the markup price, we multiply the cost by the markup percentage:
Markup price = Cost * Markup percentage
Markup price = $485.60 * 37.5%
To find the selling price, we add the markup price to the original cost: Selling price = Cost + Markup price
Selling price = $485.60 + Markup price
Let's calculate the markup price:
Markup price = $485.60 * 37.5% = $182.10
Now, we can calculate the selling price:
Selling price = $485.60 + $182.10 = $667.70
Therefore, the selling price of the water cooler, after a 37.5% markup, will be $667.70.
To know more about selling price:
https://brainly.com/question/26008313
#SPJ11
In designing bridge situated at unstable slopes, what will be
the possible remedy to slope stability problems
Possible remedies to slope stability problems when designing a bridge situated at unstable slopes include proper grading and drainage, reinforcement techniques (soil nails, ground anchors, etc.), retaining walls, vegetation and erosion control, and regular monitoring and maintenance.
Designing a bridge situated at unstable slopes presents several slope stability problems that need to be addressed to ensure the safety and longevity of the structure. Some possible remedies to slope stability problems include:
1. Geotechnical Investigation: Conduct a thorough geotechnical investigation to understand the soil and rock conditions, groundwater levels, and potential failure mechanisms. This information will help in designing appropriate stabilization measures.
2. Slope Grading and Drainage: Properly grade the slope and implement effective drainage systems to control surface water flow and reduce the risk of erosion. Poor drainage can lead to saturation of the soil, increasing the likelihood of slope failure.
3. Reinforcement Techniques: Utilize various reinforcement techniques such as soil nails, ground anchors, geogrids, or geotextiles to improve the slope's stability. These materials can increase the resistance to sliding and provide additional support.
4. Retaining Walls: Construct retaining walls to hold back unstable slopes and prevent them from collapsing. The design of these walls should consider the soil conditions, loading, and seismic forces.
5. Rock Bolting and Shotcrete: For rocky slopes, rock bolting and shotcrete can be used to stabilize loose or fractured rock masses and prevent rockfalls.
6. Slope Grouting: Grouting can be employed to stabilize loose or porous soils by injecting a stabilizing material into the ground to increase its strength and cohesion.
7. Terracing and Bench Construction: Implement terracing or bench construction techniques to break up steep slopes into smaller, more manageable steps. This reduces the potential for large-scale slope failures.
8. Vegetation and Erosion Control: Plant vegetation on the slopes to improve soil cohesion, reduce erosion, and enhance slope stability. Appropriate erosion control measures, such as erosion control blankets or bioengineering techniques, should also be employed.
9. Monitoring and Maintenance: Regularly monitor the slope and bridge foundations to detect any signs of instability or movement. Implement a maintenance plan to address any issues promptly and ensure the continued stability of the bridge.
To know more about slope stability, refer here:
https://brainly.com/question/31964891
#SPJ4
This is a linear algebra project and I have to write a programming C or python to fulfill the task.
Project B: Cubic Spline project The user inputs six points, whose x-coordinates are equally spaced. The programme generates the equations for the cubic spline with parabolic runout connecting these six points.
To fulfill the Cubic Spline project task, you can write a program in either C or Python that takes as input six points with equally spaced x-coordinates. The program should then generate the equations for a cubic spline with parabolic runout that connects these six points. The cubic spline is a piecewise-defined function that consists of cubic polynomials on each interval between adjacent points, ensuring smoothness and continuity.
To implement the Cubic Spline project, you can follow these steps:
Input: Prompt the user to enter six points, each containing x and y coordinates. Ensure that the x-coordinates are equally spaced.
Calculation of Coefficients: Use the given points to calculate the coefficients of the cubic polynomials for each interval. You can utilize interpolation techniques, such as the tridiagonal matrix algorithm or Gaussian elimination, to solve the system of equations and determine the coefficients.
Constructing the Spline: With the obtained coefficients, construct the cubic spline function by defining the piecewise cubic polynomials for each interval. The cubic polynomials should satisfy the conditions of smoothness and continuity at the points of connection.
Parabolic Runout: Modify the spline near the endpoints to ensure parabolic runout. This means that the first and second derivatives at the endpoints are equal, resulting in a parabolic shape beyond the data points.
Output: Display or print the equations of the cubic spline with parabolic runout, indicating the intervals and corresponding coefficients.
By following these steps, your program will generate the equations for the cubic spline with parabolic runout connecting the six input points, satisfying the requirements of the project.
To learn more about derivatives visit:
brainly.com/question/32963989
#SPJ11
please help me find EC
Answer:
EC = 35
Step-by-step explanation:
ED + DB = 49
ED + 30 = 49
ED = 19
ED + DC = EC
19 + 16 = EC
35 = EC
If this answer helped you, please leave a thanks!
Have a GREAT day!!!
What is the length of the unknown leg in a right triangle if √23 yd is the leg A and
√87 yd is the hypotenuse C?
The length of the base is 8 units if the length of the hypotenuse is √87 yd and the length of the opposite side is √23 yd.
What is a right-angle triangle?It is a triangle in which one of the angles is 90 degrees and the other two are sharp angles. The sides of a right-angled triangle are known as the hypotenuse, perpendicular, and base.
We have a right-angle triangle in which:
The length of the hypotenuse = √87 ydThe length of the opposite side = √23 ydAccording to the Pythagoras theorem:
[tex]\bold{hypotenuse^2 = opposite^2 + base^2}[/tex]
[tex]\sf (\sqrt{87} )^2 = (\sqrt{23} )^2 + \text{base}^2[/tex]
[tex]\text{base} = \sqrt{164}[/tex]
[tex]\text{base}=\bold{8 \ units}[/tex]
Therefore, the length of the base is 8 units if the length of the hypotenuse is √87 yd and the length of the opposite side is √23 yd.
To know more about the right-angle triangle, refer to the link below.
https://brainly.com/question/31885128
I need Help with this
Answer:
A.
Step-by-step explanation:
You want to know the quotient from the division (-x² +3x)/x.
SignsThe divisor is positive (+x, blue), so the signs of the quotient terms will match the signs of the dividend terms. You have a red and 3 blues in the dividend, so the answer will have a red and 3 blues.
This eliminates all but choice A.
The quotient is ...
A. -x +3
Terms
You can also figure the quotient term by term:
-x²/x = -x
x/x = 1 . . . . repeated 3 times
The quotient is -x +1 +1 +1. This matches choice A.
<95141404393>
Write down the q=n*deltaH plus an example in the stoichiometry section.Write down a q=m*c*deltaT eqn plus an example.Write down the R value, Is this in C or K?Write down the density of water.Write down a full Hess's Law example.
Q=nΔH & Q=mCΔT, R=8.314 J/(mol•K), water density = 1 g/mL or 1000 kg/m³, Hess's Law involves known enthalpy changes.
Q = mCΔT represents the formula for calculating heat (Q) by using the mass of the substance (m), its specific heat capacity (C), and the change in temperature (ΔT). This formula is used for calculating the heat absorbed or released during a physical change or phase transition. The gas constant (R) has a value of 8.314 J/(mol·K) and is used in gas law equations such as PV = nRT and PV = (nRT)/V. The density of water is 1 g/mL or 1000 kg/m³.
A full Hess's Law example involves calculating the enthalpy change for a chemical reaction by using a series of other reactions with known enthalpy changes.
For example, to calculate the enthalpy change for the reaction:
2H₂(g) + O₂(g) → 2H₂O(g)
We can use the following reactions with known enthalpy changes:
2H₂(g) + O₂(g) → 2H₂O(l) ΔH = -572 kJ
2H₂O(l) → 2H₂O(g) ΔH = +40.7 kJ
By reversing and scaling the second reaction and adding it to the first reaction, we can get the target reaction:
2H₂(g) + O₂(g) → 2H₂O(g) ΔH = -531.3 kJ.
Learn more about Hess's Law here:
https://brainly.com/question/3999084
#SPJ11
I need help with this guys!
The surface area of the prism is 776 ft²
What is surface area of prism?A prism is a solid shape that is bound on all its sides by plane faces.
The surface area of a prism is expressed as;
SA = 2B + pH
where p is the perimeter of the base , B is the base area and h is the height of the prism.
Base area = 1/2( a+b) h
= 1/2 × ( 20+8) 12
= 28 × 6
= 168 ft²
Perimeter of the base = 20+8 +15 + 12
= 55 ft
height = 8 ft
Therefore;
SA = 2 × 168 + 55× 8
SA = 336 + 440
SA = 776 ft²
The surface area of the prism is 776 ft²
learn more about surface area of prism from
https://brainly.com/question/1297098
#SPJ1
1. For a mail carrier wishing to select the most efficient routes and return where she started from, which theorem is most appropriate?
Fleury's brute force path
Euler's circuit theoram Euler's circuit path
Fleury's path theoram
2. A random variable which represents isolated numbers on a number line is called. of numbers is called while a random variable which represents an endless range
specific general
discrete, continuous
fine infinite..
1. The most appropriate theorem for a mail carrier wishing to select the most efficient routes and return where she started from is Euler's circuit theorem. 2. A random variable that represents isolated numbers on a number line is called a discrete random variable. A random variable that represents an endless range of numbers is called a continuous random variable.
1. The most appropriate theorem for a mail carrier wishing to select the most efficient routes and return where she started from is Euler's circuit theorem. This theorem is named after the Swiss mathematician Leonhard Euler and it is specifically designed for analyzing graphs. In this case, the mail carrier can represent the delivery locations as vertices and the routes between them as edges in a graph.
Euler's circuit theorem states that a connected graph has an Eulerian circuit if and only if every vertex has an even degree. In other words, if the mail carrier can find a route that visits each location exactly once and returns to the starting point, without retracing any edges, then she has found the most efficient route.
By applying Euler's circuit theorem, the mail carrier can optimize her route planning and ensure that she covers all locations while minimizing unnecessary travel.
2. A random variable that represents isolated numbers on a number line is called a discrete random variable. This type of random variable takes on specific, separate values with no possible values in between. For example, if we consider the number of students in a class, it can only be a whole number (e.g., 20 students, 25 students, etc.).
On the other hand, a random variable that represents an endless range of numbers is called a continuous random variable. This type of random variable can take on any value within a specified range. For example, if we consider the height of individuals, it can be any real number within a certain range (e.g., 160 cm, 165.5 cm, etc.).
Understanding the distinction between discrete and continuous random variables is crucial in statistics and probability theory, as it helps determine the appropriate mathematical models and techniques for analyzing and describing different types of data.
Learn more about the random variable from the given link-
https://brainly.com/question/16730693
#SPJ11
Functions f(x) and g(x) are defined as follows: f(x)=2x+3(−[infinity]
The function f(x) = 2x + 3 as x approaches negative infinity tends to negative infinity.
The function f(x) = 2x + 3 can be evaluated for any value of x. However, the notation "−[infinity]" after the function definition seems to indicate that the function is defined only for values of x approaching negative infinity.
To understand the meaning of the function f(x) = 2x + 3 as x approaches negative infinity, we can consider the behavior of the function for extremely large negative values of x.
As x becomes more and more negative (approaching negative infinity), the term 2x dominates the function. Since x is negative, 2x becomes more negative as x decreases. Therefore, as x approaches negative infinity, 2x approaches negative infinity as well.
The constant term 3 remains the same regardless of the value of x. Therefore, as x approaches negative infinity, the function f(x) = 2x + 3 also approaches negative infinity.
In other words, as x becomes increasingly negative, the output values of the function f(x) become increasingly negative. The function has a negative slope and decreases without bound as x approaches negative infinity.
Learn more about function from ;
https://brainly.com/question/11624077
#SPJ11
Question 2 20 Points Calculate the slope at C using ONE of these methods: double integration method, area-moment and conjugate beam method. Also, determine the deflection at C using EITHER virtual work method or Castigliano theorem method. Set P = 17 kN, w = 22 kN/m, support A is pin and support B is roller. P W DA А с sm 5 m 5m
The slope at point C can be calculated using the area-moment method. The deflection at point C can be determined using the Castigliano theorem method.
1. Calculate the slope at point C using the area-moment method:
Determine the bending moment at point C due to the applied loads.Calculate the moment of inertia of the beam section about the neutral axis passing through point C.Use the formula for slope at point C: slope = (moment at C) / (moment of inertia at C)2. Determine the deflection at point C using the Castigliano theorem method:
Identify the relevant displacement function that represents the deflection at point C.Determine the partial derivative of the strain energy of the beam with respect to the displacement at point C.Apply the Castigliano theorem formula: deflection at C = (partial derivative of strain energy) / (partial derivative of displacement)3. Consider the following information:
P = 17 kN (applied load at point A)w = 22 kN/m (uniformly distributed load along the beam)Support A is a pin, and support B is a roller.The beam has a length of 5 m.4. Calculation steps for slope at point C using the area-moment method:
Determine the reactions at supports A and B.Calculate the bending moment at point C due to the applied loads (P and w).Determine the moment of inertia of the beam section at point C.Calculate the slope at point C using the formula: slope = (moment at C) / (moment of inertia at C).5. Calculation steps for deflection at point C using the Castigliano theorem method:
Identify the relevant displacement function (e.g., vertical displacement at point C).Determine the partial derivative of the strain energy of the beam with respect to the displacement at point C.Apply the Castigliano theorem formula: deflection at C = (partial derivative of strain energy) / (partial derivative of displacement).The area-moment method, we can calculate the slope at point C based on the bending moment and moment of inertia at that point. Additionally, using the Castigliano theorem method, we can determine the deflection at point C by considering the strain energy and relevant displacement function. These calculations require the application of relevant formulas and the knowledge of the beam's properties, such as applied loads and support conditions.
Learn more about Deflection :
https://brainly.com/question/24230357
#SPJ11
The following two eventualities for producing Aluminum are true:
a.
Direct electrolysis of AlO3 in cryolite uses 6.7 kWh/kg Al produced
b. Electrolysis with C electrodes of AlO3 in cryolite uses 3.35 kWh/kg Al
(stoichiometric amounts of CO2 are produced by oxidation of C electrodes)
If the electricity available is produced by direct burning of natural gas, and about 1.21 lbs of
CO2 are generated per kWh, which method (a. or b. above) produces less CO2 per kg of
aluminum produced.
The method that produces less CO2 per kg of aluminum produced among the given two eventualities is: Electrolysis with C electrodes of AlO3 in cryolite uses 3.35 kWh/kg Al.
Aluminum is produced by electrolysis of Al2O3 dissolved in a cryolite melt.
Carbon electrodes are used for the reduction reaction. CO2 is formed by the oxidation of the C electrodes.
Stoichiometric amounts of CO2 are produced by oxidation of C electrodes in the electrolysis with C electrodes of AlO3 in cryolite which uses 3.35 kWh/kg Al, and it is less than the amount of CO2 produced in the direct electrolysis of AlO3 in cryolite which uses 6.7 kWh/kg Al produced.
Therefore, Electrolysis with C electrodes of AlO3 in cryolite uses 3.35 kWh/kg Al is the method that produces less CO2 per kg of aluminum produced.
Know more about cryolite here:
https://brainly.com/question/15520587
#SPJ11
Find the derivative
(a) f(x) = sin (x^2 + x - 4) cos (1 / x^3+1)
(b) f(x) = √(x^4 - x) cos (e^(2x-4))
(c) f(x) = x - x^3e^x / sin(x^4 + 2)
(d) f(x) = x / x^2 - x + 1
Therefore, the derivative of f(x) is:
f'(x) = cos(x^2 + x - 4) * (-3x^2 / (x^3 + 1)^2) + sin(x^2 + x - 4) * cos(1 / (x^3 + 1)) * (2x + 1)
(a) To find the derivative of f(x) = sin(x^2 + x - 4) cos(1 / (x^3 + 1)), we will apply the chain rule and product rule.
Let's denote the inner functions as u = x^2 + x - 4 and v = 1 / (x^3 + 1).
Using the chain rule, the derivative of the outer function sin(u) with respect to u is cos(u).
The derivative of the inner function u = x^2 + x - 4 is du/dx = 2x + 1.
The derivative of the inner function v = 1 / (x^3 + 1) is dv/dx = -3x^2 / (x^3 + 1)^2.
Now, applying the product rule to f(x) = sin(u) cos(v), we have:
f'(x) = sin(u) * (-3x^2 / (x^3 + 1)^2) + cos(u) * cos(v) * (2x + 1)
Therefore, the derivative of f(x) is:
f'(x) = cos(x^2 + x - 4) * (-3x^2 / (x^3 + 1)^2) + sin(x^2 + x - 4) * cos(1 / (x^3 + 1)) * (2x + 1)
(b) To find the derivative of f(x) = √(x^4 - x) * cos(e^(2x-4)), we will apply the chain rule and product rule.
Let's denote the inner functions as u = x^4 - x and v = e^(2x-4).
Using the chain rule, the derivative of the outer function √u with respect to u is (1/2√u).
The derivative of the inner function u = x^4 - x is du/dx = 4x^3 - 1.
The derivative of the inner function v = e^(2x-4) is dv/dx = 2e^(2x-4).
Now, applying the product rule to f(x) = √u * cos(v), we have:
f'(x) = (1/2√u) * (4x^3 - 1) * cos(v) + √u * (-sin(v)) * (2e^(2x-4))
Therefore, the derivative of f(x) is:
f'(x) = (2x^3 - 1) * cos(e^(2x-4)) / (2√(x^4 - x)) - √(x^4 - x) * sin(e^(2x-4)) * (2e^(2x-4))
(c) To find the derivative of f(x) = x - x^3e^x / sin(x^4 + 2), we will apply the quotient rule, chain rule, and product rule.
Let's denote the numerator as u = x - x^3e^x and the denominator as v = sin(x^4 + 2).
The derivative of the numerator u = x - x^3e^x is du/dx = 1 - (3x^2 + x^3)e^x.
The derivative of the denominator v = sin(x^4 + 2) is dv/dx = 4x^3cos(x^4 + 2).
Applying the quotient rule, we have:
f'(x) = (v * du/dx - u * dv/dx) / v^2
Substituting the values, we get:
f'(x) = [(sin(x^4 + 2) * (1 - (3x^2 + x^3)e^x)) - ((x - x^3e^x) * (4x^3cos(x^4 + 2)))] / (sin(x^4 + 2))^2
(d) To find the derivative of f(x) = x / (x^2 - x + 1), we will apply the quotient rule.
Let's denote the numerator as u = x and the denominator as v = x^2 - x + 1.
The derivative of the numerator u = x is du/dx = 1.
The derivative of the denominator v = x^2 - x + 1 is dv/dx = 2x - 1.
Applying the quotient rule, we have:
f'(x) = (v * du/dx - u * dv/dx) / v^2
Substituting the values, we get:
f'(x) = [(x^2 - x + 1) * 1 - x * (2x - 1)] / (x^2 - x + 1)^2
Therefore, the derivative of f(x) is:
f'(x) = (x^2 - x + 1 - 2x^2 + x) / (x^2 - x + 1)^2
= (-x^2 + 2x + 1) / (x^2 - x + 1)^2
Learn more about derivative here:
https://brainly.com/question/25324584
#SPJ11
An open cylinder 20cm in diameter and 90 cm high containing water is rotated about its axis at a speed of 240 rpm. What is the speed of rotation?
a. 26.15 rad/sec
b. 32.17 rad/sec
c. 25.13 rad/sec
d. 23.64 rad/sec
The speed in rad/s will be;25.13 / 62.86= 0.398 rad/s= 0.40 rad/s (approx)
Given:
Diameter of open cylinder (D) = 20cm
Radius of open cylinder (r) = D/2 = 20/2 = 10 cm
Height of open cylinder (h) = 90 cm
Speed of rotation = 240 rpm
Formula used:
The formula for the speed of rotation is given by;
Speed of rotation = 2πn Where, n = Number of revolutions per secondπ = 22/7
From the given diameter, we can find the circumference of the base of the cylinder as follows:
Circumference of base = πD= 22/7 × 20= 62.86 cm
We know that the water is contained in the cylinder which is open at the top. So, the water will form a parabolic surface whose height will vary with the radius.In order to find the speed of rotation of the cylinder, we need to find the velocity of the water at a distance r from the axis of rotation. The velocity of the water at any point depends on the distance of the water particle from the axis of rotation.
The maximum velocity of the water will be at the top and the minimum velocity will be at the bottom. The velocity at different points will be given by:v = rωWhere, r = distance of water particle from the axis of rotationω = angular velocity of the cylinder at that point= (240 × 2π) / 60= 8π rad/s
So, the velocity of the water at a distance of 10 cm from the axis of rotation will be;v = rω= 10 × 8π= 80π cm/s= 251.3 cm/s
Therefore, the speed of rotation of the cylinder is 25.13 rad/s (Option C)
Note: In order to convert the answer to rad/s, divide the answer by the circumference of the base of the cylinder. The circumference of the base is 62.86 cm.
So, the speed in rad/s will be;25.13 / 62.86= 0.398 rad/s= 0.40 rad/s (approx)
To know more about rotation, visit:
https://brainly.com/question/1571997
#SPJ11
(a) Let X, Y, and Z be arbitrary sets. Use an element argument to prove that
X ∪ (Y ∪ Z) = (X ∪ Y) ∪ Z.
b) For each of the following statements, either prove that is true or find a
counterexample that is false:
i. If A, B and C are arbitrary sets, then A − (B ∩ C) = (A − B) ∩ (A − C).
II. If A, B and C are arbitrary sets, then (A ∩ B) ∪ C = A ∩ (B ∪ C).
III. For all sets A and B, if A − B = ∅, then B ≠ ∅
We have shown that X ∪ (Y ∪ Z) = (X ∪ Y) ∪ Z.Let X, Y, and Z be arbitrary sets. Use an element argument to prove that X ∪ (Y ∪ Z) = (X ∪ Y) ∪ Z.
Proof:We need to show that any element in the set on the left side of the identity is in the set on the right and vice versa.
Let a be an arbitrary element in the set X ∪ (Y ∪ Z).
We have two cases to consider:
a ∈ XIn this case, a ∈ (X ∪ Y) since X ⊆ (X ∪ Y) and therefore a ∈ (X ∪ Y) ∪ Z.
a ∉ XIn this case, a ∈ (Y ∪ Z) and therefore a ∈ (X ∪ Y) ∪ Z.
Now, let a be an arbitrary element in the set (X ∪ Y) ∪ Z.
We have two cases to consider:
a ∈ ZIn this case, a ∈ Y ∪ Z and therefore a ∈ X ∪ (Y ∪ Z). a ∉ Z In this case, a ∈ X ∪ Y and therefore a ∈ X ∪ (Y ∪ Z).
To know more about arbitrary visit:
https://brainly.com/question/2500029
#SPJ11
A 300mm by 500mm rectangular beam section is reinforced with 4-28mm diameter bottom bars. Assume one layer of steel, the effective depth of the beam is 440mm, f’c=41.4 MPa, and fy=414 MPa. Calculate the depth of the neutral axis in mm.
To calculate the depth of the neutral axis in mm, we use the equation of the force of compression of the concrete and the force of tension of steel, the depth of the neutral axis is 460.06 mm
The force of compression of the concrete equals the force of tension of steel, i.e., compressive force = tensile force, which are given by:
We can simplify the above equation and solve it using the quadratic formula to get the value of x, which represents the depth of the neutral axis.
x² - 470.796x + 129.5759 = 0
The above quadratic equation can be solved using the quadratic formula, which is given by:For the given quadratic equation, the value of
a = 1,
b = -470.796, and
c = 129.5759.
Substituting the values in the formula, we get:
x = 460.06 mm or
x = 10.736 mmSince x represents the depth of the neutral axis, it cannot be negative. Therefore, the depth of the neutral axis is 460.06 mm (approx.).Therefore, the depth of the neutral axis is 460.06 mm (approx.).
To know more about equation visit:
https://brainly.com/question/29657983
#SPJ11
Create your own example of integers using bedmas
What factors influence the effectiveness of a buffer? What are characteristics of an effective buffer?
The effectiveness of a buffer is influenced by factors such as buffer capacity, pH range, concentration, and temperature. An effective buffer has the characteristics of a high buffer capacity, compatibility with the desired pH range, stability, and solubility.
The effectiveness of a buffer is influenced by several factors.
1. Buffer Capacity: The ability of a buffer to resist changes in pH is determined by its buffer capacity. Buffer capacity depends on the concentrations of both the weak acid and its conjugate base. A higher concentration of the weak acid and its conjugate base results in a higher buffer capacity, making the buffer more effective at maintaining a stable pH.
2. pH Range: The pH range over which a buffer is effective is important. Buffers work best when the pH is close to the pKa value of the weak acid. The pKa is the pH at which the weak acid and its conjugate base are present in equal amounts. Choosing a buffer with a pKa close to the desired pH helps ensure that it can effectively maintain the desired pH.
3. Concentration: The concentration of the buffer components also affects its effectiveness. A higher concentration of the weak acid and its conjugate base provides more buffering capacity and makes the buffer more effective.
4. Temperature: The temperature at which the buffer is used can impact its effectiveness. Some buffers may be more effective at certain temperatures than others. It's important to choose a buffer that is stable and effective at the desired temperature.
Characteristics of an effective buffer include:
1. Capacity to Resist pH Changes: An effective buffer should be able to resist changes in pH when small amounts of acid or base are added. This means that the buffer should have a high buffer capacity.
2. Compatibility with the Desired pH Range: The buffer should be able to maintain the desired pH range. This means that the pKa of the weak acid should be close to the desired pH.
3. Stability: The buffer should be stable and not undergo significant changes in pH over time or in response to external factors like temperature.
4. Solubility: The buffer components should be readily soluble in the solution to ensure their effective contribution to pH regulation.
Learn more about buffer:
https://brainly.com/question/13076037
#SPJ11
3. The gusset plate is subjected to the forces of three members. Determine the tension force in member C for equilibrium. The forces are concurrent at point O. Take D as 10 kN, and F as 8 kN 7 MARKS D
The tension force in member C for equilibrium is 6 kN.
To determine the tension force in member C, we need to analyze the forces acting on the gusset plate. Since the forces are concurrent at point O, we can consider the equilibrium of forces.
First, let's label the forces: A, B, and C. Given that D is 10 kN and F is 8 kN, we can assume that the force C acts in the opposite direction of D and F, as it is the only remaining force.
To find the tension force in member C, we can set up the equilibrium equations. The sum of the vertical forces must be zero, and the sum of the horizontal forces must also be zero. Since the forces are concurrent at point O, the sum of the moments about O must be zero as well.
Let's assume that the vertical forces acting on the gusset plate are positive when they are directed upward. With this assumption, the equilibrium equations can be written as follows:
ΣFy = C - D - F = 0 (Equation 1)
ΣFx = 0 (Equation 2)
ΣMO = F * x - D * y + C * d = 0 (Equation 3)
Here, x and y represent the horizontal and vertical distances of forces F and D from point O, respectively. d is the horizontal distance of force C from point O.
From Equation 1, we can solve for C:
C = D + F
C = 10 kN + 8 kN
C = 18 kN
Therefore, the tension force in member C for equilibrium is 18 kN.
Learn more about Tension
brainly.com/question/32546305
#SPJ11
What is the pH of a 0.174 M monoprotic acid whose K, is 2.079 x 10-3?
PH=
The pH of a 0.174 M monoprotic acid whose K, is 2.079 x 10-3 is 1.8.
pH of a 0.174 M monoprotic acid whose K, is 2.079 x 10-3 can be found as follows; pH represents the measure of acidity of a solution which is given by the negative logarithm of the hydrogen ion concentration. Mathematically, it is given by the equation:
pH = -log[H+]
Where [H+] is the hydrogen ion concentration. We can use the expression for acid dissociation constant of the acid to calculate the hydrogen ion concentration using the following formula:
K_a = ([H+][A-])/[HA] where K_a is the acid dissociation constant, HA is the acid and A- is the conjugate base of the acid. For a monoprotic acid like this one, the acid and its conjugate base are equal.
Therefore, [A-] = [HA] and the equation becomes:
K_a = ([H+][HA])/[HA]
K_a = [H+]^2/[HA] [H+]
= √(K_a*[HA])
The pH of the solution can be calculated using the expression: pH = -log[H+]
Combining the two expressions:
pH = -log(√(K_a*[HA]))
pH = -0.5log(K_a*[HA])
Substituting the given values;
K_a = 2.079 x 10-3M and [HA] = 0.174 M:
pH = -0.5log(2.079 x 10-3 * 0.174)
pH = 1.8
Therefore, the pH of a 0.174 M monoprotic acid whose K, is 2.079 x 10-3 is 1.8.
To know more about monoprotic visit-
https://brainly.com/question/32092334
#SPJ11
Obtain numerical solution of the ordinary differential equation y′=3t−10y^2 with the initial condition: y(0)=−2 by Euler method using h=0.5 Perform 3 steps. ( 4 grading points)
A numerical solution of the ordinary differential equation y′=3t−10y² with the initial condition: y(0)=−2 by Euler method using h=0.5.
Given: y′=3t−10y², y(0)=−2, h=0.5.
We need to use Euler's method to obtain a numerical solution of the given ordinary differential equation.The Euler method is an explicit numerical method for solving a first-order initial value problem given by y'=f(t, y), y(t0)=y0.
To apply the Euler method, we use the following recursive formula to update yi using the previous value y(i-1):
y(i) = y(i-1) + h*f(t(i-1), y(i-1))
where h is the step size, t(i-1) = t0 + (i-1)*h, and y0 = y(t0) is the initial condition.
Now, let's apply the Euler method to the given equation with the initial condition y(0)=-2 using h=0.5.Perform 3 steps:
At t=0, y=-2y(1)
y(0) + h*f(0, -2) = -2 + 0.5*(3*0 - 10*(-2)²)
-2 + 0.5*(3*0 - 10*(-2)²) = -1.
At t=0.5, y=-1,
y(2) = y(1) + h*f(0.5, -1) ,
y(1) + h*f(0.5, -1) = -1 + 0.5*(3*0.5 - 10*(-1)²),
-1 + 0.5*(3*0.5 - 10*(-1)²) = -0.5.
At t=1, y=-0.5y(3),
0.5y(3) = y(2) + h*f(1, -0.5),
y(2) + h*f(1, -0.5) = -0.5 + 0.5*(3*1 - 10*(-0.5)²) ,
-0.5 + 0.5*(3*1 - 10*(-0.5)²) = 0.5.
Therefore, the answer is y(3) = 0.5.
The solution steps can be summarized as follows:
y(1) = -1
y(2) = -0.5
y(3) = 0.5.
Euler’s method, one of the simplest numerical techniques for solving initial-value problems in ordinary differential equations. It uses the slope of the solution curve at a given point to compute an approximation of the solution curve at a future point.
The Euler method is a first-order method, which means that the local error (error per step) is proportional to the step size h. It has a simple derivation and implementation but can be less accurate than other methods that use more information about the solution, such as the Runge-Kutta method.
The Euler method is used to calculate the values of y for the given values of t using the initial condition y(0)=-2 and the step size h=0.5. The numerical solution of the differential equation is obtained by applying the Euler method for three steps: at t=0, 0.5, and 1.The numerical solution of the given ordinary differential equation is y(3) = 0.5.
Therefore, we obtain a numerical solution of the ordinary differential equation y′=3t−10y² with the initial condition: y(0)=−2 by Euler method using h=0.5.
The solution steps can be summarized as follows: y(1) = -1,y(2) = -0.5 and y(3) = 0.5.
To know more about Euler’s method visit:
brainly.com/question/30459924
#SPJ11
successful operation of materials in buildings requires an understanding of their characteristics as they affect the building at all stages of its lifetime. Identify the five (5) stages of life of a building / infrastructure.
The five stages of life of a building/infrastructure are pre-construction, construction, use, maintenance, and demolition.
A building/infrastructure undergoes various stages of life, from construction to demolition. Understanding these stages is vital for the successful operation of materials in buildings. The five stages of the life cycle of a building/infrastructure are as follows:
1.) Pre-construction Stage:
The pre-construction stage is the first stage, occurring before the building is constructed. It involves activities such as feasibility studies, conceptual design, site selection, and budgeting. This stage sets the foundation for the entire project.
2.) Construction Stage:
The construction stage is where the building is physically built. It encompasses activities such as site preparation, foundation laying, construction of the structural framework, installation of mechanical and electrical systems, and the finishing touches. This stage brings the design and plans to life.
3.) Use Stage:
The use stage is when the building is occupied and used for its intended purpose. It involves activities related to the operation and maintenance of the building, including regular upkeep, repairs, renovations, and periodic inspections. This stage focuses on ensuring the building functions optimally and meets the occupants' needs.
4.) Maintenance Stage:
The maintenance stage is crucial for preserving the building's condition and extending its lifespan. It includes routine maintenance tasks, preventive maintenance measures to prevent potential issues, and corrective maintenance to address any damages or malfunctions. This stage aims to keep the building in a safe and functional state.
5.) Demolition Stage:
The demolition stage marks the end of the building's life cycle. It involves activities such as conducting environmental assessments to handle hazardous materials appropriately, removing any hazardous substances, and the actual dismantling or demolition of the building. This stage clears the way for potential redevelopment or repurposing of the site.
Understanding these five stages of a building's life cycle is essential for comprehending the characteristics of materials and their effects on the building throughout its lifetime. Successful operation and management of materials in buildings require a comprehensive knowledge of these stages.
Learn more about building life cycle:
https://brainly.com/question/30476948
#SPJ11
S = 18
4.) Determine the maximum deflection in a simply supported beam of length "L" carrying a concentrated load "S" at midspan.
The maximum deflection of the beam with the given data is the result obtained using the formula:
δ max = (S × L³ / (384 × E × (1/12) × b × h³))
Given, the concentrated load "S" at midspan of the simply supported beam of length "L". We have to determine the maximum deflection in the beam.
To find the maximum deflection, we need to use the formula for deflection at midspan:
δ max = (5/384) × (S × L³ / EI)
where,
E = Modulus of Elasticity
I = Moment of Inertia of the beam.
To obtain I, we need to use the formula:
I = (1/12) × b × h³
where, b = breadth
h = depth
Substitute the value of I in the first equation to get the maximum deflection in the simply supported beam.
δ max = (S × L³ / (384 × E × (1/12) × b × h³))
The conclusion is that the maximum deflection of the beam with the given data is the result obtained using the formula above.
To know more about maximum visit
https://brainly.com/question/1944901
#SPJ11
QUESTION 13 A 5 kg soil sample contains 30 mg of trichloroethylene (TCE). What is the TCE concentration in ppmm? 0.6 ppmm 6 ppmm 60 ppmm 600 ppmm
The TCE concentration in the soil sample is 6 ppmm.
[tex]ppmm = (mg of TCE)/(kg of soil) * 10^6[/tex]
In this case, we have:
mg of TCE = 30 mg
kg of soil = 5 kg
Substituting these values into the formula, we get:
[tex]ppmm = (30 mg)/(5 kg) * 10^6 = 6 ppmm[/tex]
Therefore, the TCE concentration in the soil sample is 6 ppmm.
Trichloroethylene (TCE) is a colorless, non-flammable liquid that is used in a variety of industrial processes, including metal degreasing, dry cleaning, and paint stripping. It is also a common groundwater contaminant, as it can easily leach from soil and into water.
The safe level of TCE concentration in drinking water varies depending on the source of the water. The Environmental Protection Agency (EPA) has set a maximum contaminant level (MCL) of 5 micrograms per liter (µg/L) for TCE in drinking water. This means that the average concentration of TCE in drinking water should not exceed 5 µg/L.
However, some people may be more sensitive to TCE than others. For example, pregnant women and young children may be at an increased risk for health problems from exposure to TCE. If you are concerned about your exposure to TCE, you should talk to your doctor.
Learn more about concentration with the given link,
https://brainly.com/question/17206790
#SPJ11
Let m be a real number and M={1−x+2x^2,m−2x+4x^2}. If M is a linearly dependent set of P2 then m=2 m=−2 m=0
If the set M={1−x+2x^2,m−2x+4x^2} is linearly dependent, then m = 2.
To determine the value of the real number m that makes the set M={1−x+2x^2,m−2x+4x^2} linearly dependent, we need to check if there exist constants k1 and k2, not both zero, such that k1(1−x+2x^2) + k2(m−2x+4x^2) = 0 for all values of x.
Expanding this equation, we get k1 - k1x + 2k1x^2 + k2m - 2k2x + 4k2x^2 = 0.
Rearranging the terms, we have (2k1 + 4k2)x^2 + (-k1 - 2k2)x + (k1 + k2m) = 0.
For this equation to hold true for all values of x, the coefficients of x^2, x, and the constant term must all be zero.
1. Coefficient of x^2: 2k1 + 4k2 = 0
2. Coefficient of x: -k1 - 2k2 = 0
3. Constant term: k1 + k2m = 0
Let's solve these equations:
From equation 2, we can express k1 in terms of k2: k1 = -2k2.
Substituting this value of k1 into equation 1, we get 2(-2k2) + 4k2 = 0.
Simplifying, we have -4k2 + 4k2 = 0.
This equation is true for any value of k2.
From equation 3, we can substitute the value of k1 into the equation: -2k2 + k2m = 0.
Simplifying, we have -k2(2 - m) = 0.
For the equation to hold true, either k2 = 0 or (2 - m) = 0.
If k2 = 0, then k1 = 0 according to equation 2. This means that the coefficients of both terms in M will be zero, making the set linearly dependent. However, this does not help us find the value of m.
If (2 - m) = 0, then m = 2.
Learn more about real number here: https://brainly.com/question/17201233
#SPJ11
16. In a library the ratio of English books to Math books, is the same as the ratio of Math books to Science book. If there are 1200 books on English and 1800 books on Math, find the number of Science books.
17. Set up all the possible proportions from the numbers 12, 15, 8, 10.
18. Find the first term, if second, third and fourth terms are 21, 80, 120.
19. Find the second term, if first, third and fourth terms are 15, 27, 63.
20. Find the mean term, if the other two terms of a continued proportion are 15 and 60.
Answers for practice test on ratio and proportion are given below to check the exact answers of the questions.
The second term is 40.20. Let the mean term be x.Given, the two terms are 15 and 60.
Hence, x² = 15 × 60 ⇒ x = 30
Therefore, the mean term is 30.
16. Let the number of science books be x.
Therefore, the ratio of English books to Math books
= 1200/1800
= 2/3
The ratio of Math books to Science books
= 1800/x
Equating the two ratios,
we get:2/3
= 1800/x ⇒ x
= 2700
Thus, the number of Science books is 2700.17.
The four given numbers are 12, 15, 8, 10.
The possible proportions are:
12:15
= 4:512:8
= 3:212:10
= 6:515:8
= 15:815:10
= 3:220:8
= 5:220:10
= 2:118:10
= 9:5.18.
Let the first term be x.Common ratio, r
= (80/21)
= (120/80)
= (n/120) ⇒ n
= 180
Therefore, x
= 21/5
= 4.219.
Let the second term be x.Common ratio, r
= (27/15)
= (63/27)
= (81/x) ⇒ x
= 40.
The second term is 40.20. Let the mean term be x.Given, the two terms are 15 and 60.
Hence, x²
= 15 × 60 ⇒ x
= 30
Therefore, the mean term is 30.
To know more about term visit:
https://brainly.com/question/15387441
#SPJ11
PROBLEMS 13-1. A residential urban area has the following proportions of different land use: roofs, 25 percent; asphalt pavement, 14 percent; concrete sidewalk, 5 percent; gravel driveways, 7 percent; grassy lawns with average soil and little slope, 49 percent. Compute an average runoff coefficient using the values in Table 13-2. 13-2. An urban area of 100,000 m² has
The specific runoff coefficients used may vary based on local conditions and design standards. It's best to consult local regulations or more accurate data sources for precise values in a specific area.
To compute the average runoff coefficient for the given land use proportions, we need to refer to Table 13-2. Since the table is not provided in the question, I'll provide a general guideline for estimating the runoff coefficients based on typical values.
Here are some common runoff coefficients for different land use types:
Roofs: 0.75 - 0.95
Asphalt pavement: 0.85 - 0.95
Concrete sidewalk: 0.80 - 0.95
Gravel driveways: 0.60 - 0.70
Grassy lawns with average soil and little slope: 0.10 - 0.30
Given the proportions of land use in the residential urban area, we can calculate the average runoff coefficient as follows:
Average runoff coefficient = (Roofs area * runoff coefficient for roofs +
Asphalt pavement area * runoff coefficient for asphalt pavement +
Concrete sidewalk area * runoff coefficient for concrete sidewalk +
Gravel driveways area * runoff coefficient for gravel driveways +
Grassy lawns area * runoff coefficient for grassy lawns) / Total area
Let's assume the total area of the urban area is 100,000 m², as mentioned. We can calculate the average runoff coefficient using the given proportions and the estimated runoff coefficients:
Average runoff coefficient = (0.25 * runoff coefficient for roofs +
0.14 * runoff coefficient for asphalt pavement +
0.05 * runoff coefficient for concrete sidewalk +
0.07 * runoff coefficient for gravel driveways +
0.49 * runoff coefficient for grassy lawns) / 1
Please note that the specific runoff coefficients used may vary based on local conditions and design standards. It's best to consult local regulations or more accurate data sources for precise values in a specific area.
To know more about average visit
https://brainly.com/question/897199
#SPJ11
In a beer factory, the waste water is being heated by a heat exchanger. The temperature of the heating water is 45 C and its flow rate is 25 m3/h. The inlet temperature of waste water recorded as 10 C and its flow rate is 30 m3/h. a) Calculate K and r values for this heating system. thes b) If the temperature of heating water is increased to 55 C at t-0, what will be the response equation of the output variable, y(t)=? c) What will be outlet temperature of waste water at 5. minute?
The value of K and r for the given heating system is 0.8222 and 0.2309h-1 respectively. The response equation of the output variable, y(t) is y(t) = K (1 – [tex]e ^{ -rt}[/tex]).
The brewery industries have been one of the most contributing industries in terms of environmental pollution. The waste water from the beer factory contains several dissolved solids and organic matter which are not environmentally safe.
The brewery industries have been focusing on reducing the environmental impact by recycling the waste water or reducing the pollutants.
One such technique used by the breweries is to heat the waste water using heat exchangers and reuse it in the beer making process.
Heat exchangers are an efficient and eco-friendly way of using waste heat for the heating of waste water.
In the present scenario, the temperature of heating water is 45°C with a flow rate of 25 m3/h and inlet temperature of waste water is 10°C with a flow rate of 30 m3/h.
The calculation of K and r values is done as follows.
The heat exchanged by the heating water is equal to the heat absorbed by the waste water. Hence, m (c) (T2-T1) = m (c) (T2-T1). Using the formula,
Q = m c ΔT, we get
Q = 25,000 x 4.2 x (45 - 10)
= 4,725,000 kJ/hour.
The waste water outlet temperature is calculated using the following equation Q = m c ΔT. We have, m = 30,000 kg/hour, c = 4.2 kJ/kg.K and ΔT = (T2 - T1).
Putting in values we get,
4,725,000 = 30,000 x 4.2 x (T2 - 10).
On solving we get T2 = 54.464°C.
The response equation of the output variable is y (t) = K (1 – [tex]e ^{ -rt}[/tex]).
The outlet temperature of the waste water at 5 minutes is calculated using this formula.
The K and r values are calculated using the formulae K = 1 - (10/56.465) = 0.8222 and
r = (1/ (5 ln [(1/0.8222)]))
= 0.2309h-1.
Hence, the outlet temperature of waste water at 5 minutes can be calculated.
Thus, the value of K and r for the given heating system is 0.8222 and 0.2309h-1 respectively. The response equation of the output variable, y(t) is y(t) = K (1 – [tex]e ^{ -rt}[/tex]). The outlet temperature of the waste water at 5 minutes is 52.643°C.
A food liquid with a specific temperature of 4 kJ / kg m, flows through an inner tube of a heat exchanger. If the liquid enters the heat exchanger at a temperature of 20 ° C and exits at 60 ° C, then the flow rate of the liquid is 0.5 kg / s.
The heat exchanger enters in the opposite direction, hot water at a temperature of 90 ° C and a flow rate of 1 kg. / a second.
Specific heat of water is 4.18 kJ/kg/m.
The following are the steps to calculate the different values.
Calculation of the temperature of the water leaving the heat exchangerWe know that
Q(food liquid) = Q(water) [Heat transferred by liquid = Heat transferred by water]
Here, m(food liquid) = 0.5 kg/s
ΔT1 = T1,out − T1,in
= 60 − 20
= 40 °C [Temperature difference of food liquid]
Cp(food liquid) = 4 kJ/kg
m [Specific heat of food liquid]m(water) = 1 kg/s
ΔT2 = T2,in − T2,out
= 90 − T2,out [Temperature difference of water]
Cp(water) = 4.18 kJ/kg
mQ = m(food liquid) × Cp(food liquid) × ΔT1
= m(water) × Cp(water) × ΔT2
Q = m(food liquid) × Cp(food liquid) × (T1,out − T1,in)
= m(water) × Cp(water) × (T2,in − T2,out)
= 32.80 C
Calculation of the logarithmic mean of the temperature difference
ΔTlm = [(ΔT1 − ΔT2) / ln(ΔT1/ΔT2)]
ΔTlm = 27.81 C
Here, Ui = 2000 W/m²°C [Total average heat transfer coefficient]
D = 0.05 m [Inner diameter of the heat exchanger]
A = πDL [Area of the heat exchanger]
L = ΔTlm / (UiA) [Length of the heat exchanger]
A = π × 0.05 × L
= 314 × L
Length of the heat exchanger, L = 0.0888 m
Here, m(food liquid) = 0.5 kg/sCp(food liquid) = 4 kJ/kg m
ΔT1 = 40 °C
Qmax = m(food liquid) × Cp(food liquid) × ΔT1
Qmax = 0.5 × 4 × 40
= 80 kJ/s
Efficiency, ε = Q / Qmax
ε = 6 / 80
= 0.075 or 7.5 %
We know that U = 2000 W/m²°C [Total average heat transfer coefficient]
D = 0.05 m [Inner diameter of the heat exchanger]
A = πDL [Area of the heat exchanger]
m(water) = 68/60 kg/s
ΔT1 = 40 °C [Temperature difference of food liquid]
Cp(water) = 4.18 kJ/kg m
ΔT2 = T2,in − T2,out
= 40 °C [Temperature difference of water]
Q = m(water) × Cp(water) × ΔT2 = 68/60 × 4.18 × 40
= 150.51 kW
Here, Q = UA × ΔTlm
A = πDL
A = Q / (U × ΔTlm)
A = 2.13 m²
L = A / π
D= 2.13 / π × 0.05
= 13.52 m
The given problem is related to heat transfer in a heat exchanger. We use different parameters such as the temperature of the water leaving the heat exchanger, the logarithmic mean of the temperature difference, the length of the heat exchanger, the efficiency of the exchanger, and the length of the heat exchanger for the parallel type to solve the problem.
To know more about temperature visit:
brainly.com/question/7510619
#SPJ11