Answer:
c.hg cannot be cracked for fractional distillation as there is only one of each
Explanation:
If 4.04g of h2 gas react with oxygen gas to create 36.36g of water, how many grams of oxygen reacted?
Answer:
gO₂ = 32.32 g
Explanation:
In this case, let's write the general equation:
2H₂ + O₂ -------> 2H₂O
In this case, we can use the 1° law, which is mass conservation. If the product has 36.36 g of water, then in the reactants we should have the same 36.36 g.
According to this, we already have 4.04 of hydrogen, then the remaining to reach the 36.36 g would be:
gO₂ = 36.36 - 4.04
gO₂ = 32.32 gHope this helps
how many molecules of CO2 would 700g be?
Answer:
13
Explanation:
9. The verb corrode means 'wear away gradually, usually by a chemical reaction." A metal
that is prized for its "resistance to corrosion" has what property?
A metal that is prized for its resistance to corrosion has what property?
Answer:
The metal has a high resistance to corrosion, meaning it is more durable and will nor rust easily.
Explanation:
The verb "corrode" means the condition of being damaged easily. In other words, it means that the metal or item gets worn out easily and is not long-lasting.
So, when metal is prized for its resistance against corrosion, it means that the metal is strong and does not wear out easily. It can outstand and withheld the corrosion effect longer. This means that the metal is durable and will not corrode easily.
Which element has the highest electronegativity?
Answer:
fluorine
Explanation:
Answer:
The element with the highest electronegativity is fluorine with a score of 4.0 (which is the highest possible)
Explanation:
I personally haven't gotten this question yet so I hope this helps you!
A team of scientists claim that they have discovered a new experimental
method for determining percent composition. Which of the following is
necessary for the claim to be considered valid?
A. The method must support the law of conservation of mass.
B. The percent compositions for any two compounds made from the
same elements must be the same.
C. Each atom must contribute the same mass to the compound.
D. All scientists using the new method must get the same results.
Answer:
Option C
Explanation:
The new method must support the law of definite proportions which means that if one mole of compound is distributed percentage wise then the sum of % share of each element must be equal to one mole of compound and this percentage distribution always remains the same in all conditions
Hence, option C is correct
The pressure of a gas is 750 torr when its volume is 400. ml. Calculate the
pressure in atm if the gas is allowed to expand to 600.0 mL at a constant
temperature.
a. 0.66 atm
b. 1.5 atm
c. 500. atm
d. 1130 atm
Answer:
a. 0.66 atm
Explanation:
Pi = 750 torr = 0.99 atm. Pf = ?
Vi = 400 ml Vf = 600ml
Using PiVi = PfVf
Then 400ml × 0.99atm = Pfatm × 600ml
Solving for Pf, we have,
Pf = (400ml × 0.99atm)/600ml
Pf = 0.66atm
A solution of KOH is prepared with a [OH-] concentration of 3.3 × 10-2 M. Calculate [H+], pH, and identify whether the solution is acidic, basic, or neutral.
Answer:
[H⁺] = 3.03x10⁻¹³ MpH = 12.52The solution is basicExplanation:
We can first calculate [H⁺] by using the formula:
[H⁺] * [OH⁻] = 1x10⁻¹⁴[H⁺] * 3.3x10⁻² = 1x10⁻¹⁴[H⁺] = 3.03x10⁻¹³ MNow we proceed to calculate pH:
pH = -log [H⁺]pH = -log (3.03x10⁻¹³)pH = 12.52As the pH is higher than 7, the solution is basic.
Help please I’m confused
Answer:1 answer number 1
Explanation:
Which bone mineral stores fat?
spongy bone
red bone marrow
yellow bone marrow
What happen if your Adrenal Glands become overprotective of underproductive?
What happen if your Adrenal Glands become overprotective of underproductive?
Answer: if your adrenals becomes overproductive it will lead to a health issue known as CUSHING'S SYNDROME while when they become underproductive it will lead to a health condition known as ADDISON'S DISEASE.
Explanation:
The adrenal glands are divided into two embryologically and functionally distinct parts: the adrenal cortex and adrenal medulla.
The adrenal cortex is part of the hypothalamic - pituitary - adrenal endocrine system. Morphologically, the adult adrenal cortex consists of three layers which include:
--> The outer thin layer: this is also called zona glomerulosa. It secrets only aldosterone.
--> The inner two layers: these comprises of the zona fasciculata and zona reticularis. They both form a functional unit and secrete most of the adrenocortical hormones.
The adrenal medulla is the inner part of the adrenal gland which secrets the adrenaline and noradrenaline hormones.thry take part in sympathetic nervous system.
When the adrenal glands become a OVERPRODUCTIVE, the adrenal cortex is highly affected. This may occur due to hyperstimulation of the adrenal gland by adrenocorticotrophic hormone,either from the pituitary gland or from an ectopic source or due to largely autonomous secretion by an adrenal tumor such as an adenoma or carcinoma. The increased endogenous cortisol production leads to a disorder known as CUSHING'S SYNDROME. The clinical and metabolic features include obesity, hyperglycaemia and hypertension.
Also when the adrenal glands become UNDERPRODUCTIVE, a health condition known as ADDISON'S DISEASE may occur. This is cause any the bilateral destruction of all zones of the adrenal cortex, usually as the result of an autoimmune process or mycotic infections. The resulting decrease in cortisol production may lead to clinical features such as hypotension, hypoglycemia, nausea and vomiting.
I need help with Hess law
Answer:
The energy changes in converting reactants to products is the same regardless of the route by which the chemical changes occur.
Which of the following can be classified as a good conductor of thermal energy?
plastic
wood
rubber
copper
Why does the chloride ion have a charge of -1
Explanation:
As we know that chloride ion is halogen. So it has seven valence electrons in its valence shell. Hence it gains one electron from others during chemical reaction to be stable. So Chloride ion have a negative charge of -1.
Hope it will help :)❤
Wat two common uses for Cadmium
Answer:
Common (industrial) uses for cadmium today are in batteries, alloys, coatings (electroplating), solar cells, plastic stabilizers, and pigments
Annie has a soccer ball and a kickball. She kicks each ball with the same force. The soccer ball accelerates at 3 m/s2, and the kickball accelerates at 5 m/s2. Use Newton’s laws to describe why the kickball has a greater acceleration.
Also sorry its actually science
How many joules are required to change 40 grams of water to steam at the boiling point?
Answer:
2260 J
Explanation:
For water at its boiling point of 100 ºC, the heat of vaporization is 2260 J g-1. This means that to convert 1 g of water at 100 ºC to 1 g of steam at 100 ºC, 2260 J of heat must be absorbed by the water.
Explain how the digestive/excretory system is similar to a recycling center
Answer:
The digestive system is a system where our body breaks down food to acquire important nutrients. This is the same as your local recycling center because they collect and breaks the plastic down to be reused into recycled products.
The excretory system is a system where we remove excess unnecessary materials. This can be the same as the recycling center because they remove unnecessary materials (such as trash that is not meant to be recycled).
What happens when water is added to quicklime? Write two observations.
Answer:
1.Most metal oxides are insoluble in water but some of these (e.g. Na2O.
Explanation:
2.: (i) A hissing sound is observed.
1.ii) The mixture starts boiling and lime water is obtained.
HELLLLLLPPPPP
What type of circuit does this figure represent?
an open series circuit
an open parallel circuit
a closed parallel circuit
a closed series circuit
Electricity and magnetism
Answer:
a closed series circuit
Answer:
An open series circuit
Explanation:
I'm late but for future people...
I took the test.
hello guys,
differentiate between vapourisation and evaporation
Answer:
vapourisation can occur from solid or liquid into a gas but evaporation is straight from a liquid and is often below boiling temperature while vapourisation is often above boiling temperature
Answer:
[tex] \huge\red{\boxed{\mathfrak{Hello}}}[/tex]
[tex]\underline\blue{\textsf{\textbf{Question-}}}[/tex]
Differences between Vaporization & Evaporation:-[tex]{\huge\pink{\fbox{{࿐αɴѕωєя࿐}}}}[/tex]
[tex] \huge\green{ \mid{ \underline{ \overline{ \tt PARAMETERS: }} \mid}}[/tex]
DefinitionTransition of stateSpeed of processEffect areaMovement of molecule[tex] \huge\purple{ \mid{ \underline{ \overline{ \tt VAPORIZATION: }} \mid}}[/tex]
It is defined as the transitional phase of a compound or an element at the boiling temperature.It changes the state of matter from a solid or liquid to a gas.It is generally happening at a fast pace and also it needs less amount of energy.During the vaporization process, all of the water turns into a gas.During vaporization, molecules may come from below the surface of liquid also.[tex] \huge\orange{ \mid{ \underline{ \overline{ \tt EVAPORATION:}} \mid}}[/tex]
It is nothing but a special kind of vaporization and mostly occurring at the temperature below the boiling point.It changes the liquid state of the matter directly into a gas.It is generally a slower process that needs more energy.During the evaporation process, only the top level of water turn into gas.During evaporation, molecules vaporize from the surface of liquid only.➳ ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
[tex] \huge\pink{ \mid{ \underline{ \overline{ \tt ꧁❣ RainbowSalt2222 ࿐ }} \mid}}[/tex]
If energy was added to solid, what state would it change to
A. Super solid
B. Plasma
C. Liquid
Answer:
Explanation:
The answer is C Liquid
if there is a bottle of grape juice with 20% juice and there is 1000mL of total drink, how many mL of water
is in the bottle?
Answer:
760ml of water
Explanation:
Answer: 800mL
Explanation:
20% of 1000mL is 200. 1000mL - 200mL is 800mL
Why is CaCl, called "calcium chloride" but SCl, is called sulfur
dichloride?
Answer:
because Sulphur is written as S₂
Explanation:
Para que sirven los modelos atómicos
Answer:
mi no speak espanol
Explanation:
Make up a short story to explain jays speed and acceleration change throughout his walk. Make sure to address parts A-D
Answer:
Speed of jays increases first, again increases, decreases and then increases.
Explanation:
The speed of jays increases while moving from rest to point A and no acceleration due to constant speed. From point A to point B, the speed is continues to increase and no acceleration. From point B to point C, the speed of jays decreases and acceleration is produced in the journey due to change of speed and from point C to point D, the speed of jays again increases and acceleration is produced due to increasing the speed.
Answer:
The speed of jay's walk increases first, again increases, then it decreases and then increases due to his acceleration walk during parts A-D.
Explanation:
The molar mass of copper (I) carbonate is
Answer:
[tex]\huge\colorbox{violet}{✏﹏ \: ᴀɴsᴡᴇʀ \: }[/tex]
➳The molar mass of copper (I) carbonate is 187.1 g/mol
[tex] \huge\blue{ \mid{ \underline{ \overline{ \tt ꧁❣ ʀᴀɪɴʙᴏᴡsᴀʟᴛ ²²²² ࿐ }} \mid}}[/tex]
What volume of 1.50 M KBr is fromed ,using 15.6 mL of concentrated KBr with a molarity of 9.65 M?
Answer:
100.4mL
Explanation:
Using the following formula:
C1V1 = C2V2
Where;
C1 = initial concentration (M)
C2 = final concentration (M)
V1 = initial volume (mL)
V2 = final volume (mL)
According to the information in this question,
C1 = 1.50M
V1 = ?
C2 = 9.65 M
V2 = 15.6 mL
Using C1V1 = C2V2
V1 = C2V2/C1
V1 = (9.65 × 15.6) ÷ 1.5
V1 = 150.54 ÷ 1.5
V1 = 100.36 mL
Approximately, V1 = 100.4mL
Will give lots of points if answered correctly. Determine the kb for chloroform when 0.793 moles of solute in 0.758 kg changes the boiling point by 3.80 °C.
Answer: The value of [tex]K_{b}[/tex] for chloroform is [tex]3.62^{o}C/m[/tex] when 0.793 moles of solute in 0.758 kg changes the boiling point by 3.80 °C.
Explanation:
Given: Moles of solute = 0.793 mol
Mass of solvent = 0.758
[tex]\Delta T_{b} = 3.80^{o}C[/tex]
As molality is the number of moles of solute present in kg of solvent. Hence, molality of given solution is calculated as follows.
[tex]Molality = \frac{no. of moles}{mass of solvent (in kg)}\\= \frac{0.793 mol}{0.758 kg}\\= 1.05 m[/tex]
Now, the values of [tex]K_b[/tex] is calculated as follows.
[tex]\Delta T_{b} = i\times K_{b} \times m[/tex]
where,
i = Van't Hoff factor = 1 (for chloroform)
m = molality
[tex]K_{b}[/tex] = molal boiling point elevation constant
Substitute the values into above formula as follows.
[tex]\Delta T_{b} = i\times K_{b} \times m\\3.80^{o}C = 1 \times K_{b} \times 1.05 m\\K_{b} = 3.62^{o}C/m[/tex]
Thus, we can conclude that the value of [tex]K_{b}[/tex] for chloroform is [tex]3.62^{o}C/m[/tex] when 0.793 moles of solute in 0.758 kg changes the boiling point by 3.80 °C.
What are some facts about Radon???
Answer:
It was the fifth radioactive element discovered, and is typically a colorless gas that puts off an insane glow when frozen.
m
Which two types of energy are formed by the transformation shown in the
photo?
O A. Chemical energy - thermal energy
B. Thermal energy - electrical energy
C. Thermal energy - chemical energy
D. Chemical energy - electromagnetic energy
Answer:
D
Explanation:
Hope it helps
#CarryOnLearning