The ice is used to regulate and control the temperature during the dehydration of [tex]hydrated copper(II) sulfate[/tex], ensuring a safer and more controlled process.
When [tex]hydrated copper(II) sulfate[/tex] [tex](CuSO_ {4} .H_{4} O)[/tex] is heated, the purpose of the ice is to provide a cooling effect during the process. The hydrated copper(II) sulfate contains water molecules (H2O) that are chemically bonded to the copper sulfate compound. The formula [tex]CuSO_{4} .H_{2} O[/tex] indicates that there are x moles of water molecules per mole of copper(II) sulfate.
As the [tex]hydrated copper(II) sulfate[/tex] is heated, the heat energy causes the water molecules to undergo a physical change and turn into steam. This process is known as dehydration. The water molecules break their chemical bonds with the copper sulfate compound and are released in the form of steam.
The presence of ice during the heating process helps maintain a lower temperature in the reaction vessel. The ice absorbs the heat energy from the surroundings, allowing for a controlled and gradual increase in temperature. This controlled heating prevents sudden temperature changes and potential hazards, such as splattering or overheating.
In summary, the ice is used to regulate and control the temperature during the dehydration of [tex]hydrated copper(II) sulfate[/tex], ensuring a safer and more controlled process.
For more questions on dehydration, click on:
https://brainly.com/question/1301665
#SPJ8
The diagram represents a voltaic cell.
Refer to Figure 1 and answer the following
Question:
When the switch is closed, which group of letters
correctly represents the direction of electron flow?
The direction in which the electron flows in the voltaic cell can be shown by A, B, C, D. Option A
What is the voltaic cell?
A voltaic cell, often referred to as a galvanic cell, is an electrochemical device that uses a redox (reduction-oxidation) reaction to transform chemical energy into electrical energy. It is made up of two half-cells joined together by a conductive channel, allowing electrons to move freely between them. An electrode dipped in an electrolyte solution is present in each half-cell.
To keep the electrical balance in the half-cells, the passage of electrons is accompanied by ion mobility through the electrolyte solutions. The redox process might continue as a result of the ions' mobility, which completes the circuit.
Learn more about voltaic cell:https://brainly.com/question/29186551
#SPJ1
What does the latent heat of fusion measure?
• A. The energy required to melt a substance
B. The energy required to boil a substance
• c. The energy required to heat a substance
• D. The energy required to form a substance
The latent heat of fusion measures " The energy required to melt a substance" option (A).
The latent heat of fusion refers to the amount of energy required to change a substance from a solid state to a liquid state at its melting point while keeping the temperature constant. It is a specific type of latent heat that measures the energy needed for the phase transition of a substance.
When a substance is in a solid state, its particles are tightly packed and have a regular arrangement. As heat is added to the substance, its temperature gradually rises until it reaches the melting point. At this point, further addition of heat does not increase the temperature but instead causes the substance to undergo a phase change and transform into a liquid state. The energy absorbed during this process is known as the latent heat of fusion.
This energy is used to overcome the attractive forces between the particles in the solid and allow them to break free and move more freely in the liquid state. The latent heat of fusion is crucial in various practical applications, such as melting ice, changing solid metals into liquid form for casting, or utilizing phase change materials for thermal energy storage.
For more questions on latent heat, click on:
https://brainly.com/question/30430924
#SPJ8
what three forces are in tug of war?
2. Experimental data for a simple reaction showing the rate of
change of reactant with time are given to Table 5.13.
Table 5.13 Experimental
data for a simple reaction.
Time
(min)
Concentration
(kg·m−3)
0 16.0
10 13.2
20 11.1
35 8.8
50 7.1
Show that the data gives a kinetic equation of order 1.5 and determine the rate constant.
The kinetic equation for the given reaction is first-order with respect to the reactant, and the rate constant is zero.
To determine the kinetic equation and rate constant for the given data, we need to analyze the relationship between the concentration of the reactant and time.
The general form of a first-order reaction is given by the equation:
Rate = k[A]^n
Where:
Rate is the rate of the reaction
k is the rate constant
[A] is the concentration of the reactant
n is the order of the reaction with respect to the reactant
By analyzing the given data, we can calculate the reaction rate and determine the order of the reaction and the rate constant.
Let's first calculate the reaction rate using the initial and final concentrations and the corresponding time intervals:
Rate = (Change in concentration) / (Change in time)
For the first time interval (0 to 10 min):
Rate = (13.2 kg·m^(-3) - 16.0 kg·m^(-3)) / (10 min - 0 min) = -2.8 kg·m^(-3)·min^(-1)
Similarly, we can calculate the rates for the other time intervals:
10 to 20 min: Rate = (11.1 kg·m^(-3) - 13.2 kg·m^(-3)) / (20 min - 10 min) = -2.1 kg·m^(-3)·min^(-1)
20 to 35 min: Rate = (8.8 kg·m^(-3) - 11.1 kg·m^(-3)) / (35 min - 20 min) = -2.3 kg·m^(-3)·min^(-1)
35 to 50 min: Rate = (7.1 kg·m^(-3) - 8.8 kg·m^(-3)) / (50 min - 35 min) = -1.7 kg·m^(-3)·min^(-1)
By observing the rates for different time intervals, we can see that the rate of change in concentration does not remain constant. This suggests that the reaction is not first-order with respect to the reactant.
To determine the order of the reaction, we can examine how the rate changes with the concentration. Let's calculate the rate ratios for the different time intervals:
Rate ratio (10/0) = (-2.8 kg·m^(-3)·min^(-1)) / (-2.8 kg·m^(-3)·min^(-1)) = 1
Rate ratio (20/10) = (-2.1 kg·m^(-3)·min^(-1)) / (-2.8 kg·m^(-3)·min^(-1)) ≈ 0.75
Rate ratio (35/20) = (-2.3 kg·m^(-3)·min^(-1)) / (-2.1 kg·m^(-3)·min^(-1)) ≈ 1.10
Rate ratio (50/35) = (-1.7 kg·m^(-3)·min^(-1)) / (-2.3 kg·m^(-3)·min^(-1)) ≈ 0.74
By observing the rate ratios, we can see that they are not constant, indicating that the reaction is not a simple integer order (e.g., first-order or second-order). However, we can approximate the order of the reaction by calculating the average rate ratio:
Average rate ratio = (1 + 0.75 + 1.10 + 0.74) / 4 ≈ 0.897
The order of the reaction can be approximated as the exponent that gives this average rate ratio. In this case, the order is approximately 0.897, which we can round to 1. Therefore, the kinetic equation for the reaction is:
Rate = k[A]^1.5
Now, to determine the rate constant (k), we can choose any set of data points and solve for k. Let's use the first data point at time = 0 min:
16.0 kg·m^(-3) = k * (0 min)^1.5
Since (0 min)^1.5 is zero, the right side of the equation is zero. Therefore, k must be zero as well.
For more such questions on kinetic equation visit;
https://brainly.com/question/22855016
#SPJ8
Rank these least polar=1 to most polar=11 and why the most polar is the most polar
To rank these least polar=1 to most polar=11, we need to understand what polarity is. The term "polarity" refers to the distribution of electrical charge in a molecule.
A molecule is polar if its electron cloud is distributed unevenly and has poles, resulting in the molecule having a positive and a negative end. A molecule is nonpolar if its electron cloud is distributed uniformly, resulting in the molecule having no charge poles.
The ranking of the given compounds from least polar to most polar is as follows:
Least polar: 7 (nonpolar)
4 (nonpolar)
9 (nonpolar)
1 (nonpolar)
8 (polar)
2 (polar)
6 (polar)
5 (polar)
10 (polar)
3 (most polar)
Most polar: 3 (most polar)
The reasoning behind this ranking is that the difference in electronegativity between the two atoms that make up the molecule determines polarity.
The greater the difference in electronegativity between two atoms, the more polar the bond between them is. As a result, we can classify the compounds as nonpolar and polar. We rank these compounds based on their polarity, with the least polar being nonpolar and the most polar being polar.
For more questions on polarity, click on:
https://brainly.com/question/17118815
#SPJ8
Which chemical equation represents a precipitation reaction ?
The correct option that represents a precipitation reaction is:
B. K2CO3 + PbCl2 -> 2KCl + PbCO3
In a precipitation reaction, two aqueous solutions are mixed, resulting in the formation of an insoluble solid called a precipitate. This solid is formed due to the combination of certain ions that are no longer soluble in the solution.
In option B, when potassium carbonate (K2CO3) reacts with lead chloride (PbCl2), it produces potassium chloride (2KCl) and lead carbonate (PbCO3) as the products. Lead carbonate is an insoluble compound and forms a precipitate, which indicates a precipitation reaction.
Options A, C, and D do not represent precipitation reactions:
- Option A represents a double displacement reaction between magnesium bromide (MgBr2) and hydrochloric acid (HCl), resulting in the formation of magnesium chloride (MgCl2) and hydrogen bromide (HBr).
- Option C represents a substitution reaction between lithium acetate (LiC2H3O2) and tetrabromotitanium (IV) (TiBr4), forming lithium bromide (LiBr) and tetrakis(acetato) titanium (IV) (Ti(C2H3O2)4).
- Option D represents a double displacement reaction between ammonium nitrate (NH4NO3) and copper chloride (CuCl2), resulting in the formation of ammonium chloride (NH4Cl) and copper nitrate (Cu(NO3)2).
Therefore, option B is the correct representation of a precipitation reaction.
F0r more questions on precipitation, click on:
https://brainly.com/question/14330965
#SPJ8
combustion always result in to formation of water. what other type of reactions may result into formation of water? examples of these reactions
As combustion always result into the formation of water, the other type of reactions that may result into formation of water are Acid-Base Neutralization Reactions and Hydrogen and Oxygen Reaction.
Acid-Base Neutralization Reactions:
A neutralisation reaction is a chemical process in which an acid and a base combine to produce salt and water as the end products.
H⁺ ions and OH⁻ ions combine to generate water during a neutralisation reaction. Acid-base neutralisation is the most common type of neutralisation reaction.
Example: Formation of Sodium Chloride (Common Salt):
HCl + NaOH → NaCl + H₂O
Hydrogen and Oxygen Reaction:
Water vapour is created when hydrogen gas (H₂) and oxygen gas (O₂) are combined directly. This reaction produces a lot of heat and releases a lot of energy.
Example: 2 H₂ + O₂ → 2 H₂O
Learn more about reactions:
https://brainly.com/question/25769000
A spatula of sodium hydrogen carbonate was placed in a boiling tube.lemon juice was added dropwise while shaking until no other change was seen. Give the expected observation and explain it
Answer:
When sodium hydrogen carbonate (also known as baking soda) reacts with lemon juice (which is acidic), a chemical reaction occurs. The expected observations and the explanation for each observation are as follows:
1. Effervescence (bubbling): As the lemon juice (citric acid) reacts with sodium hydrogen carbonate, carbon dioxide gas is produced. This gas escapes as bubbles, leading to effervescence. The reaction can be represented as follows:
Sodium Hydrogen Carbonate + Citric Acid → Carbon Dioxide + Water + Sodium Citrate
2. Release of a citric-like odor: When citric acid from the lemon juice reacts with the sodium hydrogen carbonate, it forms sodium citrate, which has a fruity odor similar to citric acid.
3. Change in color or formation of foam: Depending on the specific lemon juice used, there might be a color change or the formation of foam due to the interaction between the citric acid and the baking soda. This observation can vary depending on the concentration of the lemon juice and the amount of baking soda used.
4. No further visible change: Once the reaction is complete, there will be no other visible changes. The carbon dioxide gas produced during the reaction will dissipate into the air, and the solution will reach a new equilibrium.
Overall, the reaction between sodium hydrogen carbonate and lemon juice is an acid-base reaction, resulting in the production of carbon dioxide gas. This reaction is commonly used in baking to create a leavening effect and make baked goods rise.
If I have 1.9 moles of gas he a pressure of 5 ATM and in a container volume of 5.0× 10^ 4mL.Wis the temperature of the gas?
Temperature of the gas is approximately 570.4 K when there are 1.9 moles of gas at a pressure of 5 ATM and a volume of 5.0 × [tex]10^{4}[/tex] mL.
To determine the temperature of the gas, we can use the ideal gas law equation, which states that the pressure of a gas is directly proportional to its temperature, volume, and the number of moles of gas. The equation is given by:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
In this case, we are given the pressure (P = 5 ATM), volume (V = 5.0 × 10^4 mL), and number of moles (n = 1.9 moles) of the gas. We can rearrange the ideal gas law equation to solve for temperature:
T = PV / (nR)
Substituting the given values and the value of the ideal gas constant (R = 0.0821 L·atm/(mol·K)), we can calculate the temperature:
T = (5 ATM) × (5.0 × [tex]10^{4}[/tex] mL) / (1.9 moles × 0.0821 L·atm/(mol·K))
After performing the calculations, we find that the temperature of the gas is approximately 570.4 K.
Know more about ideal gas law here:
https://brainly.com/question/27870704
#SPJ8
What is the cell potential of the concentration cell described by the following, at 298 K?
Cu(s)|Cu2+(aq,0.10M)||Cu2+(aq,1.00M)|Cu(s)E∘Cu2+/Cu=+0.34 V
It should be noted that at 298 K, the cell potential (E°cell) of the given concentration cell is 0 V.
How to calculate the valueE°cell = E°cathode - E°anode
Given that E°Cu2+/Cu = +0.34 V, the reduction half-reaction occurring at the cathode is:
Cu2+(aq) + 2e- -> Cu(s)
And the oxidation half-reaction occurring at the anode is:
Cu(s) -> Cu2+(aq) + 2e-
Since the concentrations of Cu2+ on both sides of the cell are different, this is a concentration cell. The concentration gradient will drive the cell to reach equilibrium.
Now, let's calculate the E°cell:
E°cell = E°cathode - E°anode
= (+0.34 V) - (+0.34 V)
= 0 V
Therefore, at 298 K, the cell potential (E°cell) of the given concentration cell is 0 V.
Learn more about cell on
https://brainly.com/question/3717876
#SPJ1
Acetic acid has the molecular formula CH3COOH. How many atoms of oxygen are there in 60 grams of acetic acid?
There are approximately 1.203 × 10^24 atoms of oxygen in 60 grams of acetic acid.
To determine the number of atoms of oxygen in 60 grams of acetic acid (CH3COOH), we need to consider the molar mass and the molecular formula of acetic acid.
The molar mass of acetic acid can be calculated by summing the atomic masses of each element in its molecular formula. The atomic masses of carbon (C), hydrogen (H), and oxygen (O) are approximately 12.01 g/mol, 1.01 g/mol, and 16.00 g/mol, respectively.
Molar mass of CH3COOH = (1 × 12.01 g/mol) + (4 × 1.01 g/mol) + (2 × 16.00 g/mol) + 1.01 g/mol
= 60.05 g/mol
Now, we can calculate the number of moles of acetic acid in 60 grams using the molar mass:
Number of moles = Mass / Molar mass
= 60 g / 60.05 g/mol
≈ 0.999 moles
From the molecular formula of acetic acid, we can see that there are two atoms of oxygen in each molecule.
Therefore, the number of atoms of oxygen in 60 grams of acetic acid can be calculated by multiplying the number of moles by the Avogadro's number, which represents the number of particles (atoms, molecules, or ions) in one mole of a substance. Avogadro's number is approximately 6.022 × 10^23 particles/mol.
Number of atoms of oxygen = Number of moles × Avogadro's number × Number of oxygen atoms in one molecule
= 0.999 moles × 6.022 × 10^23 particles/mol × 2
≈ 1.203 × 10^24 atoms
For more such questions on acetic acid. visit:
https://brainly.com/question/15231908
#SPJ8
pls pls help me plssss
Select the correct terms to complete this statement about charged particles.
Like charges attract | repel, and opposite charges attract repel. According to Coulomb's law, as the distance between two charged particles decreases, the force between the particles decreases I increases. As the magnitude of the charges decreases, the force decreases | increases.
Like charges repel each other, while opposite charges attract each other. This principle is one of the fundamental aspects of electrostatics. According to Coulomb's law, the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
As the distance between two charged particles decreases, the force between them increases. This is because the closer the particles are, the stronger the electric field they create, leading to a stronger force of interaction.
On the other hand, as the magnitude of the charges decreases, the force between the particles also decreases. This is because the force is directly proportional to the product of the charges. If one or both of the charges are smaller, the force they exert on each other will be weaker.
In summary, according to Coulomb's law, decreasing the distance between charged particles increases the force between them, while decreasing the magnitude of the charges decreases the force. This understanding of the relationship between charge, distance, and force is crucial in explaining the behavior of charged particles and the interactions between them.
Know more about Coulomb's law here:
https://brainly.com/question/26892767
#SPJ8
6) A gas that has a volume of 33 liters, a temperature of 24 °C, and an unknown pressure has its
volume increased to 41,000 milIILiters and its temperature decreased to 13 °C. When the
pressure was measured after the change it was determined to be 2.7atm, what was the original
pressure?
The original pressure[P₁] is approximately 0.0848 atm
We can use the combined gas law equation, which relates the initial and final conditions of a gas sample. The combined gas law equation is as follows:
(P₁ × V₁) / (T₁) = (P₂ × V₂) / (T₂)
Given:
V₁ = 33 liters
T₁ = 24 °C = 24 + 273.15 = 297.15 K (converted to Kelvin)
V₂ = 41,000 milliliters = 41 liters (converted to liters)
T₂ = 13 °C = 13 + 273.15 = 286.15 K (converted to Kelvin)
P₂ = 2.7 atm
We need to find P₁, the original pressure.
Plugging in the values into the combined gas law equation:
(P₁ × 33) / (297.15) = (2.7 × 41) / (286.15)
Simplifying the equation:
33P₁ = (2.7 × 41 × 297.15) / (286.15)
33P₁ ≈ 2.804
Dividing both sides by 33:
P₁ ≈ 2.804 / 33
P₁ ≈ 0.0848 atm
To know more about Gas Law Equation refer to this link
https://brainly.com/question/25736513
If the pH of a solution is 4.5 and the other pH of another solution is 7.9, what are the solutions for pH, pOH, [H+], and [OH-]?
For the solution with a pH of 7.9:
pH = 7.9
pOH = 14 - pH = 14 - 7.9 = 6.1
[H+] = 10^(-pH) = 10^(-7.9) (in mol/L)
[OH-] = 10^(-pOH) = 10^(-6.1) (in mol/L)
The pH of a solution is a measure of its acidity, while pOH is a measure of its alkalinity. The pH and pOH values are related through the equation pH + pOH = 14.
For the solution with a pH of 4.5:
pH = 4.5
pOH = 14 - pH = 14 - 4.5 = 9.5
[H+] = 10^(-pH) = 10^(-4.5) (in mol/L)
[OH-] = 10^(-pOH) = 10^(-9.5) (in mol/L)
For the solution with a pH of 7.9:
pH = 7.9
pOH = 14 - pH = 14 - 7.9 = 6.1
[H+] = 10^(-pH) = 10^(-7.9) (in mol/L)
[OH-] = 10^(-pOH) = 10^(-6.1) (in mol/L)
Note: The [H+] and [OH-] concentrations can also be calculated using the equation [H+][OH-] = 1 x 10^(-14) at 25°C.
For more questions on alkalinity, click on:
https://brainly.com/question/867708
#SPJ8
Which quantity of helium may be represented by the symbol He?
Answer:
4.0026 atomic mass unit
Explanation:
The symbol "He" represents the chemical element helium. Helium is a colorless, odorless, and non-toxic gas that is the second lightest element in the periodic table. It is represented by the atomic number 2 and has an atomic mass of about 4.0026 atomic mass units (u). Helium is known for its low boiling point, making it commonly used as a cryogenic refrigerant and for filling balloons. It is also used in various scientific and industrial applications, such as cooling superconducting magnets, as a shielding gas in welding, and as a component in gas chromatography.
5 organic functional groups similar to morphine and cannabinol
which number is correctly expressed in scientific notation
Answer:
x*10ⁿ (units)
Explanation:
Scientific notation never has leading or trailing zeros.
0.0064 would be expressed as 6.4*10³
6400 would be expressed as 6.4*10³
multiplying by 10 to an exponent just adds or subtracts zeros, so count how many zeros have to be added or subtracted, and multiply by 10ⁿ, where n is how far from the decimal point.
A mass of 100 g of NaNO3 is dissolved in 100 g of water. At what temperature should solid crystals form?
A mass of 100 g of NaNO3 is dissolved in 100 g of water, at "31.2°C" temperature the solid crystals are form.
When 100 g of NaNO3 is dissolved in 100 g of water, the solution formed is a saturated solution because NaNO3 is an ionic compound, and ionic compounds are soluble in water.
The following is the solubility curve of NaNO3 in water at different temperatures, which shows how much solute (in grams) can dissolve in 100 grams of water at different temperatures, or in other words, the maximum solubility: [tex]\text{NaNO}_{3}\text{ solubility curve}[/tex]We have to identify the temperature at which the solubility curve of NaNO3 intersects the line of 100 g of NaNO3.
The intersection point is at 31.2°C. At this temperature, the solution is saturated, and any additional amount of NaNO3 will result in the formation of solid crystals.
As a result, the temperature at which solid crystals will form is 31.2°C.
For more questions on saturated solution, click on:
https://brainly.com/question/1851822
#SPJ8
Two reactants combine to form a product in the reaction A + BC. The rate of the
reaction depends on the concentrations of both reactants squared (rate = K[A]²[B]²).
What's the total reaction order of this reaction?
OA) 3
OB) 4
OC) 2
OD) 1
With the aid of a clearly labelled diagram, explain the effect of substrate concentration on the rate of reaction catalysed by an allosteric enzyme
Allosteric enzymes change shape upon binding an effector molecule, displaying a sigmoidal substrate concentration vs. reaction rate curve. The reaction rate increases until saturation, characterized by the enzyme's Km.
Allosteric enzymes are enzymes that change their shape upon binding of another molecule, known as an effector, to a specific site, the allosteric site. These enzymes are essential for regulating metabolic pathways in cells.A graph of substrate concentration vs. reaction rate for an allosteric enzyme often displays a sigmoidal curve. The enzyme initially binds the substrate molecule with a relatively low affinity, which corresponds to a low reaction rate. However, as the substrate concentration increases, more enzyme-substrate complexes are formed, causing a conformational change in the enzyme that increases its affinity for substrate molecules at other sites. As a result, the reaction rate increases sharply, but only up to a certain point, after which it levels off. The substrate concentration at which the reaction rate is half of its maximum value is known as the enzyme's Michaelis-Menten constant (Km). A substrate concentration that exceeds the Km does not affect the reaction rate. The enzyme is saturated with substrate molecules, so it cannot bind anymore.For more questions on Allosteric enzymes
https://brainly.com/question/29548129
#SPJ8
An aqueous solution of 4mol/L nitric acid is eletrolysed in an electrolytic cell using graphite electrodes. Write the chemical symbols for all the ions present in the electrolytic cell.
Electrolysis of nitric acid produces hydrogen gas at the cathode and nitrogen dioxide, oxygen gas, and hydrogen ions at the anode.
When an aqueous solution of 4mol/L nitric acid is electrolyzed in an electrolytic cell using graphite electrodes, the following chemical symbols for all the ions present in the electrolytic cell are obtained:A) The anode equation: 2HNO₃ → 2NO₂ + O₂ + 2H⁺ + 2e⁻The anions present in the electrolytic cell include nitrate ions (NO₃⁻) and chloride ions (Cl⁻). The nitrate ions, which are the conjugate base of nitric acid (HNO₃), are attracted to the anode where they lose electrons to produce nitrogen dioxide (NO₂), oxygen gas (O₂), and hydrogen ions (H⁺). Nitric oxide (NO) and nitrogen gas (N₂) can also be formed as by-products.B) The cathode equation: H⁺ + e⁻ → 1/2H₂The cations present in the electrolytic cell include hydrogen ions (H⁺) and nitrate ions (NO₃⁻). Hydrogen ions (H⁺) in the electrolytic cell are reduced by gaining electrons at the cathode to produce hydrogen gas (H₂). Nitrate ions (NO₃⁻) from nitric acid are not reduced at the cathode but migrate toward the anode. In summary, nitric acid, when electrolyzed in an electrolytic cell using graphite electrodes, produces hydrogen gas at the cathode and nitrogen dioxide, oxygen gas, and hydrogen ions at the anode. The conjugate base of nitric acid, nitrate ions, is present as anions in the electrolytic cell. The cations present in the electrolytic cell are hydrogen ions and nitrate ions.For more questions on Electrolysis
https://brainly.com/question/12994141
#SPJ8
Thomas wants to measure the temperature change that occurs when sodium hydroxide is dissolved in water.
Which is the best tool for this purpose?
Answer: A thermometer
Explanation: The best tool for measuring temperature change in this scenario would be a thermometer. A thermometer is specifically designed to measure temperature and can accurately indicate changes in temperature when substances are mixed or undergo reactions. When sodium hydroxide (NaOH) is dissolved in water, it is an exothermic reaction, meaning it releases heat. By using a thermometer, Thomas can monitor and measure the temperature change that occurs as sodium hydroxide dissolves in water. It is important to select a suitable thermometer that can accurately measure the desired temperature range and ensure that it is calibrated correctly for accurate readings. Additionally, it is advisable to use a thermometer that is specifically designed for liquid measurements, such as a liquid-in-glass thermometer or a digital thermometer with a suitable probe for liquid measurements. These types of thermometers provide reliable temperature readings and are commonly used in scientific experiments and laboratory settings to measure temperature changes accurately.
Suppose a solution has a density of 1.87 g/mL. If a sample has a mass of 17.5 g the volume of the sample in mL is what?
Batteries have potential energy in their __________ energy stores. What one word completes the sentence?
Batteries have potential energy in their chemical energy stores.
The one word that completes the sentence is "chemical." Batteries store potential energy in the form of chemical energy. This means that the energy is stored within the chemical components of the battery.
Here's a step-by-step explanation:
1. Batteries are devices that convert chemical energy into electrical energy.
2. Chemical energy is the energy stored within the chemical bonds of a substance.
3. In the case of batteries, this chemical energy is stored in the chemical components of the battery, such as the electrolyte and the electrodes.
4. When a battery is connected to a circuit, a chemical reaction takes place within the battery, causing the stored chemical energy to be converted into electrical energy.
5. This electrical energy can then be used to power electronic devices or perform other tasks.
To summarize, batteries store potential energy in their chemical energy stores. This potential energy is converted into electrical energy when the battery is used.
For more such questions on potential energy
https://brainly.com/question/13997830
#SPJ8
What is the density at STP of NOz gas (molar
mass = 46.01 g/mol) in grams per liter?
Answer:
We can use the ideal gas law, PV = nRT, to solve for the density at STP (standard temperature and pressure). At STP, the temperature is 273.15 K and the pressure is 1 atm. We know the molar mass of NO2 is 46.01 g/mol. We also know that 1 mole of any gas at STP occupies a volume of 22.4 L.
First, we can calculate the number of moles of NO2 at STP:
n = PV/RT = (1 atm)(22.4 L)/(0.08206 L·atm/mol·K)(273.15 K) = 1.00 mol
Next, we can calculate the mass of 1 mole of NO2:
46.01 g/mol
Finally, we can calculate the density of NO2 at STP:
density = mass/volume = (46.01 g/mol)/(22.4 L) = 2.054 g/L
Therefore, the density at STP of NO2 gas (molar mass = 46.01 g/mol) in grams per liter is 2.054 g/L.
Explanation:
explain how you would calculate the q for warming 100.00 grams of liquid water from 0*C to 100*C
It would require 418,000 Joules of heat (q) to warm 100.00 grams of liquid water from 0°C to 100°C.
To calculate the heat (q) required to warm 100.00 grams of liquid water from 0°C to 100°C, you can use the formula:
q = m * c * ΔT
where:
q is the heat,
m is the mass of the substance (in grams),
c is the specific heat capacity of the substance, and
ΔT is the change in temperature.
For water, the specific heat capacity (c) is approximately 4.18 J/g°c. The mass (m) is given as 100.00 grams. The change in temperature (ΔT) is calculated as the final temperature minus the initial temperature, which is 100°C - 0°C = 100°C.
Substituting the values into the formula, we have:
q = 100.00 g * 4.18 J/g°c * 100°C
q = 418,000 J
Therefore, it would require 418,000 Joules of heat (q) to warm 100.00 grams of liquid water from 0°C to 100°C.
For more questions on heat capacity, click on:
https://brainly.com/question/27991746
#SPJ8
Science Question!
Please order by correct order if Answer and please be Real!
Answer:
matter undergoes
chemical changes such as burning and rusting.
physical changes such as evaporating and melting.
matter has
chemical properties such as reacting with oxygen and changing when heated.
physical properties such as luster and volume.
4. What is the mass of liquid at 30°C that has a density of 23 g ml and the volume shown in the graduated cylinder? (Show your work to receive credit.)
Answer:
To find the mass of the liquid at 30°C, we first need to determine the volume of the liquid shown in the graduated cylinder. We can do this by using the markings on the cylinder to measure the volume.
Once we have the volume, we can use the density of the liquid to calculate the mass. The formula for calculating the mass of an object with known density and volume is:
mass = density x volume
Using the given information, we have:
density = 23 g/mL volume = the volume shown in the graduated cylinder
Explanation:
What is the molar mass for ZnI2?
The molar mass of ZnI2 is approximately 319.18 grams per mole.
To determine the molar mass of ZnI2 (zinc iodide), we need to know the atomic masses of zinc (Zn) and iodine (I) and their respective subscripts in the chemical formula.
The atomic mass of zinc (Zn) is approximately 65.38 grams per mole (g/mol), as found on the periodic table. The atomic mass of iodine (I) is approximately 126.90 g/mol.
Since the chemical formula of zinc iodide is ZnI2, it means there are two iodine atoms for every one zinc atom. Therefore, we multiply the atomic mass of iodine by 2.
Molar mass of ZnI2 = (atomic mass of Zn) + 2 × (atomic mass of I)
= 65.38 g/mol + 2 × 126.90 g/mol
= 65.38 g/mol + 253.80 g/mol
= 319.18 g/mol
Hence, the molar mass of ZnI2 is approximately 319.18 grams per mole.
For more questions on molar mass, click on:
https://brainly.com/question/837939
#SPJ8