How will the boat be affected if it enters a part of the river where the current is moving south at 2 m/s?​

Answers

Answer 1

Answer:

The boat is most likely to crash or sink since the water will be very rapid and pacing.


Related Questions

The velocity versus time graph of particle A is tangent to the velocity versus time graph for particle B at point O. What is the acceleration of the particle A at point O?

A. -0.85 meters/second2
B. 1.16 meters/second2
C. -1.16 meters/second2
D. -0.9 meters/second2

Answers

Answer: C. -1.16 meters/second2

Explanation:

A= v/t (velocity/time)

in this case: v=7 and t=6

So, A= 7/6

A=1.16

The graph is decreasing so accelleration would be negative

A= -1.16 meters/second2

Option C! ; )

Answer:

-1.16 meters second^2

Explanation:

I got 100% on my test

How much heat must be added to a 250g aluminum pan to raise its temperature from 20°C to
85°C? The specific heat of aluminum is 897 J/kg K.

Answers

Answer:

The heat energy required to raise the temperature from 20°C to 85°C is 1.46x10^4J

Question 2

True or false. In a parallel circuit the current remains the same everywhere.
A.False
B. True

Answers

B. True give me branliest

Answer:

Its False

Explanation:

In parallel circuits the current splits up so each branch has a different effective resistance (in each of the separate branches one can use the series rule again). Due to this, the current isn't the same everywhere in a parallel circuit.

brainliest?

Which is one-dimensional

A.

acceleration

B.

all of them

C.

speed

D.

velocity

Answers

Answer:

B

Explanation:

They are all one-dimensional

A 2.0kg cart moving right at 5.0 m/s on a frictionless track collided and sticks to a 3.0 kg cart moving left at 3.0 m/s. What is the final speed of the carts?

Answers

Answer:

the final speed is 0.20

5. What is the frequency of a sound wave when the speed of the sound is 340 m/s and has a wavelength of 1.21 m? 263 Hz 281 Hz O 328 Hz O 346 Hz​

Answers

Answer:

281 Hz

Explanation:

I am so so sorry if this is wrong. But good luck and have a good day

I believe the answer is D but wanted to make sure.

Answers

Answer:

Yes you are right

Explanation:

hope this helps and I get the Brain thingy whatever it call

Osteocytes are located in the lacuna, a small chamber in the calcified matrix of the bone.
A True
B False

Answers

Answer:

The answer is true I hope it helps you

What is the answer for this question?

Answers

Answer:

6 watts

Explanation:

hours against watts

I'm not sure though

Radio waves pass through us easily every day with no bad effects. Gamma Rays will kill you in large doses. What is the difference between these two forms of energy?

Answers

Answer:

gamma rays are super compact

Explanation:

as you move up the electromagnetic spectrum the wave lengths get shorter and shorter (higher and higher energy) gammas being the highest on the spectrum

Radio waves pass through us easily every day with no bad effects. Gamma Rays will kill you in large doses. the difference between these two forms of waves are in their energy.

What is wave ?

Wave is is a disturbance in a medium that carries energy as well as momentum . wave is characterized by amplitude, wavelength and phase. Amplitude is the greatest distance that the particles are vibrating. especially a sound or radio wave, moves up and down. Amplitude is a measure of loudness of a sound wave. More amplitude means more loud is the sound wave.

Wavelength is the distance between two points on the wave which are in same phase. Phase is the position of a wave at a point at time t on a waveform.

There are two types of the wave longitudinal wave and transverse wave.

The energy of the electromagnetic photon is given by frequency times plank's constant. Hence energy is directly proportional to the requency. The frequency of the radio waves is far smaller than the gamma rays hence it has low energy. this is the difference, which leads gammas rays  injurious to heath.

To know more about Electromagnetic wave :

https://brainly.com/question/3101711

#SPJ2.

Lesson : LIGHT
Answer the following questions on the basis of given ray diagram.
1. Name the rays A and B.
2. Which ray has more speed ( A or B ) in the glass medium ?
3. Which phenomenon is shown in the given diagram ?
4. Ray B is bending more than the ray A. What is the reason behind it ?

~Thanks in advance! <3

Answers

Answer:

Explanation:

1. Both are refracted light.

2. B has more speed.

3. Dispersion

4. Lights of different wavelengths have different speed in prism. It causes the lights to refract at different angle; forming a color spectrum.

Energy can be ___ from one storage mechanism to another.

Answers

Answer:

Energy can be transferred from one storage mechanism to another.

TRUE or FALSE

A front door peephole is a convex lens.

Answers

Answer:

it is Trueeeee

hi, i know that this isnt neces sary. but can anyone request a ga mes for me, im bo red. thankyou. ​

Answers

Answer:

genshin impact. the same level. and AdCap

Types of media that can influence one's social development include all of the following except
A. movies
B. Internet
C. books
D. traditions
Please select the best answer from the choices provided

Answers

a. movies b. internet c. books

Answer:

the answer is D

Explanation:

Which color of light comes from a greater energy transition?
1. Red 2. Yellow 3. Green 4. Blue

Answers

Answer:

D.) Blue

Explanation:

because Blue is a higher frequency and therefore corresponds to a higher energy level transition.

I hope this helped you :)

Which word describes both o2 and h2o?
Molecule
Solution
Atom
Compound

Answers

Its not Molecule or Compound
I THINK they are atom but it could also be solution Im not entirely sure

A 30 kg box is pushed along a horizontal surface. The person pushing the box pushes with a constant force of 300 N directed at an angle of 30° below the horizontal. If the box starts from rest and reaches a speed of 5 m/s after only 2 seconds of pushing, find the force of friction acting on the box.

Answers

Answer:

aye son yall think if i keep answering these questions incorrectly.. they'll find out what im doing and take my li points back?

Explanation:

What is a voltage divider?

Answers

Answer:

please give me brainlist and follow

Explanation:

In electronics, a voltage divider (also known as a potential divider) is a passive linear circuit that produces an output voltage (Vout) that is a fraction of its input voltage (Vin). Voltage division is the result of distributing the input voltage among the components of the divider.

An incident ray that passes through the vertex of a convex lens:
F
F
c
A. refracts inward, at an angle equal to the angle of incidence,
B. continues in a straight line without refracting.
C. refracts parallel to the axis of the lens,
D. refracts outward, at an angle equal to the angle of incidence.

Answers

the answer is refracts parallel to the axis of the lens

When a 6 Ω resistor is connected across the terminals of a 3 V battery, the number of coulombs passing through the resistor per second is

Answers

Answer:

Given that - R = 6 ohm

V = 3 volt

n = ?

so by ohms law , V = I X R

I = V \ R = 3 \ 6 = 0.5 A

we know that I = Q / T here t is 1 sec

Q = I X T = 0.5 X 1 = 0.5 C

By the law of quantization ,

Q = n x e

n = Q / e = 0.5 / 1.6 x 10 ^-19

n = 0.3125 x 10^19

hoped so u got the answer mark me as brainellist :)

Answer:

0.5/1.6×10^-19

Explanation:

formula for current is v

I R

3/6=0.5

charge if found by the product of current and time which is one second

0.5×1 =0.5

deficiency of n=no of charges×charge of electrons

0.5/1.6×10^-19

Paper clips, nails, and scissors all act as which of the following?
electromagnets
ion magnets
temporary magnets

Answers

I think its ion magnets correct me if I'm wrong

A 100 N force is applied to move an object a horizontal distance of 5 meters at constant speed in 10 seconds. How much power is done?

Answers

F= 100 N , d= 5 m
Time taken = 10 sec
Power= work/time
[ work = f*d]
100*5/10
= 500/10
= 50 watt

The power used when a 100 N force is applied to move an object through a distance of 5 m at constant speed in 10 seconds is 50 W

We'll begin by calculating the energy. This can be obtained as follow:

Force (F) = 100 N

Distance (s) = 5 m

Energy (E) =?

E = F × s

E = 100 × 5

E = 500 J

Finally, we shall determine the power. This can be obtained as follow:

Energy (E) = 500 J

Time (t) = 10 s

Power (P) =?

[tex]P = \frac{E}{t}\\\\P = \frac{500}{10}[/tex]

P = 50 W

Therefore, the power used in moving the object is 50 W.

Learn more:

https://brainly.com/question/24817638

How is protein related to nucleic acid?

Answers

Answer:

The subunits of nucleic acids are also the subunits of proteins.

Explanation:

i hope this helps

Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of:

Answers

Answer:

1 ohm

Explanation:

since there are two identical resistors, one resistor will be

R = [tex]\frac{4}{2}[/tex] =2ohm [ proven as in series [tex]R_{e} = 2 + 2 = 4ohm[/tex] ]

to calculate the equivalent resistance when in parallel:

[tex]\frac{1}{R_{e} } = \frac{1}{R_{1} } + \frac{1}{R_{2}}[/tex]

so,

[tex]\frac{1}{R_{e} } = \frac{1}{2} + \frac{1}{2}[/tex]

[tex]R_{e} = 1ohm[/tex]

Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.

What is ohm?

In a parallel circuit, voltage is thee same across each component in the circuit. The sum of the currents through each path is equal to the current from the source. However, the resistance cannot be added directly. It is calculated as:

1/Rt = 1/R1 + 1/R2 + 1/R3 1/Rt = 1/6.8 + 1/9.0 + 1/15

Rt = 3.08 ohms.

When resistors are connected in parallel, the equivalent resistance R will be less than the least resistance.

1/R = 1/R1 + 1/R2 + 1/R3 + 1/R4 + 1/R5

Since the 5 resistors are 10 ohms each, substitute them in to the formula

1/R = 1/10 + 1/10 +1/10 + 1/10 + 1/10

The LCM = 10

1/R = 5/10

Reciprocate both sides

R = 10/5 = 2 ohms

Therefore, Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.

Learn more about equivalent resistance on:

https://brainly.com/question/13606415

#SPJ5

A force of 120 N is applied to the front of a sledge at an angle of 28.00 above the horizontal so as to pull the sledge a distance of 165 meters. How much work was done by the applied force?

Answers

Answer:

Workdone = 17482.36 Joules

Explanation:

Given the following data;

Force, F = 120 N

Angle, d = 28.0°

Distance, x = 165 m

To find the work done, we would use the following formula;

Workdone = FxCosd

Substituting into the formula, we have;

Workdone = 120*165*Cos(28)

Workdone = 19800 * 0.8830

Workdone = 17482.36 Joules

An ideal gas expands isothermally performing 4.30 x 10³ of work in the process. Calculate (a)
the change in internal energy of the gas, and (b) the heat absorbed during this expansion.​

Answers

Answer:

The solution of the given query is explained below in the explanation portion.

Explanation:

Given value is:

Work,

⇒  [tex]W=4.30\times 10^3 \ J[/tex]

(a)

The change in the internal energy will be:

⇒  [tex]\Delta V=\frac{3}{2}nR(\Delta T)[/tex]

Throughout the isothermal procedure, The temperature will be constant "ΔT = 0".

then,

⇒  [tex]\Delta V = \frac{3}{2}nR(0)[/tex]

⇒  [tex]\Delta V = 0 \ J[/tex]

(b)

As we know,

⇒  [tex]\Delta V = Q-W[/tex]

On substituting the value, we get

⇒      [tex]0=Q-W[/tex]

On adding W both sides, we get

⇒    [tex]W=Q-W+W[/tex]

⇒    [tex]W=Q[/tex]

On substituting the given value of "W", we get

⇒     [tex]Q=4.30\times 10^3 \ J[/tex]    

A plumber is going to put two pipes in a wall, one in front and one in back. The pipes will be touching once they are installed. Both pipes are the same size and have the same number of molecules. The diagram above shows the pipes now, before they have touched. Use the information in the diagram to answer the question.

How does the temperature of the front pipe compare with the temperature of the back pipe before the pipes touch? What will happen after the pipes have been touching for a while?

Answers

Answer:

They become the same exact tempature

Explanation:

Since they got connected it should be the same.

the temperature of the front pipe compare with the temperature of the back pipe before the pipes touch by using same temperature.

what is temperature ?

Temperature is the measure of hotness or coldness expressed in terms of any of several arbitrary scales and it indicate the direction in which heat energy will spontaneously flow from a hotter body to a colder body.

It is not the equivalent of the energy of a thermodynamic system like burning match is at a much higher temperature than an iceberg whereas the total heat energy contained in an iceberg.

Temperature which is similar to pressure or density known as intensive property  that is independent of the quantity of matter is considered as distinguished from extensive properties, such as mass or volume.

For more details regarding temperature, visit

https://brainly.com/question/23411503

#SPJ2

You can make your exercise harder (or easier) by using this _____ law(s) to design to the perfect workout
A. Second
B.First
C.Third
D.Combination of all three

Answers

D.Combination of all three

Answer:

First

Explanation:

i took the test and its first


[tex]\huge\sf\underline\blue{⚓☠Question ☠}[/tex]




An electric iron consumes energy at a rate of 840 W when heating is at the maximum rate and 360 W when the heating is at the minimum. The voltage is 220 V. What are the current and the resistance in each case?

Don't spam ​

Answers

Answer:

See Explanation

Explanation:

We know that;

P= IV

Where;

P = power

I= current

V = voltage

Here, we have a voltage of 220V

Hence, for maximum rate;

P= IV

I = P/V

P = 840 W

V= 220 V

I= 840 W/220 V

I= 3.8 A

V = IR

R = V/I

R = 220/3.8

R = 57.9 Ω

For minimum heating;

P= 360 W

V= 220 V

I = P/V

I = 360 W/220V

I= 1.6 A

V= IR

R = V/I

R = 220 V/1.6 A

R = 137.5 Ω

Other Questions
help me on these please asap pls help me plss im so STUCK AHhH Which linear equation represents the table shown below?~ y=6x+2~ y=x+4~ y=4x+2~y=4x-2 Which of these CAN be a probability of an event. CHOOSE ALL THAT APPLY!*1.) 0.3484832.) 1.013.) -14.) 0.995.) 06.) -0.5 Can someone explain why i got this answer wrong and how to get the answer! And please someone help me Choose the meaning of the bolded word in the question The camp director stated the rules, "accentuating" sportsmanship A) postponing B)adjusting C) remembering D) emphasizing A bank gives loans at higher interest rates to a Black man and lower interestrates to a white man, what is this an example of?A. Internalized racismB. Post-racial societyC. Interpersonal racismD. Economic racism Could someone please go to my last question and answer it please help ill give brainliest someone please help me answer this!!1 Help me Im so behind:( A spinner has 10 equal sized sections. Two of the sections are green. A. What is the probability that the spinner will land on green?B. Use words to describe the probability. pls help asap !!!!!!!!!!!!!!!!!!!!! Guys pls help me!!!!! What are some natural processes that are affected by conduction? Read the lines from Book 1 of Paradise Lost. Fall'n Cherub, to be weak is miserable Doing or Suffering: but of this be sure, To do aught good never will be our task, But ever to do ill our sole delight, As being the contrary to his high will Whom we resist. Who is meant to be the speaker in these lines? Beelzebub Adam Milton Satan help pls giving branliest G. 97+{2+3[42+(3+2)7]+8} h. {- [ (14 - 7) - (32 - 41)]} i. [(-8 + 3) + (- 21 12)] j. 500 {( 6 18 + 4 + 3 + 16 - 10 2) 5 } k. (9 + 7 2 + 4) ( 9 -12 ) Boxers wear gloves that are padded to lessen the force of a punch. Calculate the force exerted by a boxing glove on an opponent's face, if the glove and face compress 8.50 cm during a blow in which the 7.00-kg arm and glove are brought to rest from an initial speed of 10.0 m/s. Give your answer in Newtons, do not include the unit in your answer. (3/4)(-4/3) = 0True or False